Regardless of what materials you want to destroy, what sort of organisation you work for, and what sort of data you collect, you choose to shred documents for the fundamental reason that you do not want your paperwork or confidential materials to be recovered. You want to ensure the fragments of your paper – even if shredding a single sheet – cannot be put back together.
The development of shredding standards such as DIN 66399, EN 15713 and CPNI ensure that, when standards are met, reassembly is not possible – not even for a single sheet.
But what does this all mean?
When considering the destruction of confidential materials, it’s important to know what the different shredding standards mean. This will enable you to ensure the shred standard you
require is met.
This document discusses resource usage and sustainability best practices at Flinders. It provides statistics on paper and toner usage over 6 months and estimates costs. It recommends using recycled paper, ink tank printers that can be refilled, and electric vehicles that don't emit gases. The document outlines procedures for identifying, purchasing, and storing materials, as well as maintaining printers through routine cleaning. It discusses Flinders' record keeping, filing, and security practices for ensuring document authenticity, integrity and confidentiality. Work health and safety requirements are also summarized.
3 m edge eg5 intrinsically safe user manual (053 669 rev i)Home
Here are the typical steps to perform a noise assessment with the Edge dosimeter:
1. Identify tasks, jobs, or areas of concern that may have high noise exposure levels. Perform a walk-through and observe worker tasks.
2. Select monitoring locations based on the task analysis. Place the dosimeter on workers in those areas.
3. Program the Edge dosimeter settings based on the relevant noise regulations (e.g. OSHA, MSHA). Configure parameters like run type, criteria levels, exchange rates.
4. Train workers on how to wear and operate the dosimeter properly. Ensure a tight, secure fit on their person.
5. Start monitoring runs when workers enter areas of concern
The document provides guidance on physical security measures for protecting buildings, equipment, and information. It recommends securing building access points, monitoring equipment placement, maintaining access logs, and identifying organization property. It also suggests preparing for threats like theft, natural disasters, or equipment malfunctions through measures such as equipment tracking, environmental controls, and backup power sources. The document stresses applying security protocols appropriately based on risk assessments.
3M is a leader in firestopping and has been developing firestop products and technologies for over 30 years. The document provides an overview of 3M's full line of firestop products including sealants, foams, devices, and kits for through-penetration firestops, construction joints, and other applications. It also discusses 3M's leadership in testing, code development, and training to promote fire safety standards.
Managing industrial facilities requires balancing safety, productivity, and compliance. Facility managers must oversee complex safety systems while facing resource constraints. This document provides four tips for industrial managers: 1) Choose an experienced fire protection contractor to design and install safety systems to ensure proper installation and compliance. 2) Engage a licensed service provider with certified personnel to properly test, inspect, and maintain safety systems. 3) Use a dedicated fire safety control system rather than production control systems to ensure components work as required and testing does not disrupt operations. 4) Partner with an experienced provider to gain expertise in system design, installation, and maintenance in order to strengthen safety programs.
This is the complete portfolio of services provided by the Ventro Group. Specialising in passive fire protection - especially fire doors - we also expanded into the market for high speed roller doors and roller shutters.
Our flagship service that everyone knows Ventro for is the Fire Door Healthcheck, whereby we serve hotels, housing associations, hospitals and many other public buildings with a comprehensive fire door auditing report, followed by regular maintenance. www.ventrogroup.com
This document provides information on risk management for businesses. It discusses how identifying and addressing risks can reduce insurance costs and prevent losses. Key risks include those relating to premises like fire and theft, equipment like computers, employees, transportation, and theft or fraud. The document recommends businesses conduct risk assessments, improve security, and develop contingency plans to minimize risks and the impact of any losses. Proper risk management is also required by law for health and safety.
This document summarizes ecom, a company that specializes in intrinsically safe mobile devices for use in hazardous environments. Ecom prides itself on German engineering and safety, developing explosion-protected mobile phones and PDAs. As a pioneer in the industry since 1986, ecom works closely with customers to develop customized solutions for industries like oil, gas, and chemicals. Ecom has a global network of partners and aims to maintain the highest safety and quality standards.
This document discusses resource usage and sustainability best practices at Flinders. It provides statistics on paper and toner usage over 6 months and estimates costs. It recommends using recycled paper, ink tank printers that can be refilled, and electric vehicles that don't emit gases. The document outlines procedures for identifying, purchasing, and storing materials, as well as maintaining printers through routine cleaning. It discusses Flinders' record keeping, filing, and security practices for ensuring document authenticity, integrity and confidentiality. Work health and safety requirements are also summarized.
3 m edge eg5 intrinsically safe user manual (053 669 rev i)Home
Here are the typical steps to perform a noise assessment with the Edge dosimeter:
1. Identify tasks, jobs, or areas of concern that may have high noise exposure levels. Perform a walk-through and observe worker tasks.
2. Select monitoring locations based on the task analysis. Place the dosimeter on workers in those areas.
3. Program the Edge dosimeter settings based on the relevant noise regulations (e.g. OSHA, MSHA). Configure parameters like run type, criteria levels, exchange rates.
4. Train workers on how to wear and operate the dosimeter properly. Ensure a tight, secure fit on their person.
5. Start monitoring runs when workers enter areas of concern
The document provides guidance on physical security measures for protecting buildings, equipment, and information. It recommends securing building access points, monitoring equipment placement, maintaining access logs, and identifying organization property. It also suggests preparing for threats like theft, natural disasters, or equipment malfunctions through measures such as equipment tracking, environmental controls, and backup power sources. The document stresses applying security protocols appropriately based on risk assessments.
3M is a leader in firestopping and has been developing firestop products and technologies for over 30 years. The document provides an overview of 3M's full line of firestop products including sealants, foams, devices, and kits for through-penetration firestops, construction joints, and other applications. It also discusses 3M's leadership in testing, code development, and training to promote fire safety standards.
Managing industrial facilities requires balancing safety, productivity, and compliance. Facility managers must oversee complex safety systems while facing resource constraints. This document provides four tips for industrial managers: 1) Choose an experienced fire protection contractor to design and install safety systems to ensure proper installation and compliance. 2) Engage a licensed service provider with certified personnel to properly test, inspect, and maintain safety systems. 3) Use a dedicated fire safety control system rather than production control systems to ensure components work as required and testing does not disrupt operations. 4) Partner with an experienced provider to gain expertise in system design, installation, and maintenance in order to strengthen safety programs.
This is the complete portfolio of services provided by the Ventro Group. Specialising in passive fire protection - especially fire doors - we also expanded into the market for high speed roller doors and roller shutters.
Our flagship service that everyone knows Ventro for is the Fire Door Healthcheck, whereby we serve hotels, housing associations, hospitals and many other public buildings with a comprehensive fire door auditing report, followed by regular maintenance. www.ventrogroup.com
This document provides information on risk management for businesses. It discusses how identifying and addressing risks can reduce insurance costs and prevent losses. Key risks include those relating to premises like fire and theft, equipment like computers, employees, transportation, and theft or fraud. The document recommends businesses conduct risk assessments, improve security, and develop contingency plans to minimize risks and the impact of any losses. Proper risk management is also required by law for health and safety.
This document summarizes ecom, a company that specializes in intrinsically safe mobile devices for use in hazardous environments. Ecom prides itself on German engineering and safety, developing explosion-protected mobile phones and PDAs. As a pioneer in the industry since 1986, ecom works closely with customers to develop customized solutions for industries like oil, gas, and chemicals. Ecom has a global network of partners and aims to maintain the highest safety and quality standards.
SG World provides various solutions to help businesses manage visitors, contractors, and inspections on their premises. They offer products like ID passes, electronic visitor management systems, contractor authorization systems, work permits, and safety inspection documentation. SG World has over 40 years of experience developing these types of compliance and safety solutions to help customers manage people and ensure regulatory compliance. They operate worldwide with headquarters in the UK and offices in the US and Europe.
This document provides a selection guide and price list for security products from Gunnebo in 2014. It includes:
- An overview of Gunnebo's product range including brands for cash/fire protection (Chubbsafes), underfloor safes (Churchill Safes), and document protection (Rosengrens).
- Information on choosing a suitable product by identifying security objectives and definitions of locking options.
- Details on Gunnebo's planning, delivery, and installation services to ensure a flexible and thorough selection process.
Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual, Shorum Toko Grc Borongan Meter Gambir - Gambir - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc Borongan Meter Kebon Kelapa - Gambir - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc Borongan Meter Petojo Utara - Gambir - Jakarta Pusat.
Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual, Shorum Toko Grc Borongan Meter Duri Pulo - Gambir - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc Borongan Meter Cideng - Gambir - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc Borongan Meter Petojo Selatan - Gambir - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil
Harga Jual Shorum Toko Grc Borongan Meter Bendungan Hilir - Tanah Abang - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum, Toko Grc Borongan Meter Karet Tengsin - Tanah Abang - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc Borongan Meter Kebon Melati - Tanah Abang - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc Borongan Meter Kebon Kacang - Tanah Abang - Jakarta Pusat.
Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual, Shorum Toko Grc Borongan Meter Kampung Bali - Tanah Abang - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc, Borongan Meter Petamburan - Tanah Abang - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc Borongan Meter Gelora - Tanah Abang - Jakarta Pusat.
Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual, Shorum Toko Grc Borongan Meter Menteng - Menteng - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc Borongan Meter Pegangsaan - Menteng - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc Borongan Meter Cikini - Menteng - Jakarta Pusat.
Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc Borongan Meter Kebon Sirih - Menteng - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc Borongan Meter Gondangdia - Menteng - Jakarta Pusat, Jasa Pasang Gypsum Tukang
Clean Seal, Inc. is a manufacturer and distributor of extruded rubber and plastic seals, springs, hose, molded products, and trim moldings located in South Bend, Indiana. Founded in 1978, Clean Seal serves hundreds of industries and prides itself on its technical expertise, large inventory, and ability to ship stock items quickly. Clean Seal focuses on continuous innovation and lean manufacturing to provide custom solutions and meet customers' sealing and insulation needs.
Devastating grain dust explosions have been recorded for decades as the risk of flour dust ignition is so high. Without adequate controls and safety measures, grain flour explosions have been known to level entire milling facilities and take lives. While mill owners are making the effort to comply with DSEAR and ATEX regulations to ensure their staffs’ safety, the execution of preventive measures has not always been correct. Many milling facilities share common problems when it comes to the installation of protective equipment. In some cases, they inadvertently exclude “fail-safes” where necessary.
This document provides product information and purchasing details for an Andrew 245173 3M Cold Shrink Kit. The kit is used for sealing cable connections from 1/2 inch to 3/8 inch cables. It includes an EPDM rubber tube and sealing foam strip. To purchase, customers can call or email the company for pricing or to request a quote. Same day shipping is available for orders placed before 3pm EST.
TM Insight founder and director Travis Erridge is considered Australia's leading project consultant when it comes to high-bay warehousing development. Here are his Top 5 areas to consider when contemplating a development of this nature.
Dräger Gas & Flame Detectors (Fixed & Portable Detection)Thorne & Derrick UK
This document discusses gas detection systems from Dräger Safety. It notes that Dräger has over 70 years of experience in gas detection technology and focuses on innovation through in-house research. Their gas detection systems use modular designs that allow for expansion, modification, and modernization of existing systems. Dräger aims to provide customized solutions through a detailed analysis and consultation process to meet individual customer needs.
Clean Seal Molded Specialties specializes in custom bumpers for docks/vehicles of all kinds. From backing your tractor trailer to a dock or your boat to a pier/dock. We have a custom or stock solution to suit your needs to protect your equipment and recreational vehicles.
Leading Double Compression Cable Glands Manufacturer in IndiaGIE Cable Glands
Gie Cable Gland (Suryoday Enterprise) is a one of the leading Brass Double Cable Gland Manufacturers, Suppliers & Exporters in India, Based in Jamnagar, Gujarat.
Burnings in industrial estates cause damage amounting to billions every year. If people are hurt or injured, investigations
will always be implemented in order to find out whether the management has arranged in advance for all necessary precautionary
measures concerning fire protection. Even if the tangible assets are normally subject to insurance cover, the
effects on business, like e.g. a long-term loss in production with all its consequences are often underestimated.
1. There are several types of lens materials that can be used in infrared windows, with the choice driven by the application environment and transmission requirements.
2. Common lens materials include germanium, zinc selenide, and sapphire - each with their own transmission properties and temperature ranges.
3. The lens material must be able to withstand the environmental conditions inside the enclosure, have suitable infrared transmission, and meet any certification or safety standards.
The document provides information about Cortem Group, an Italian company that specializes in explosion-protected electrical equipment. It discusses Cortem's 40+ years of experience, its product lines including lighting fixtures, junction boxes, and control panels. It also covers Cortem's certifications, quality standards, worldwide partners and distributors, and customized engineered solutions.
This document provides product information and purchasing details for an Andrew 245172 3M Cold Shrink Kit. The kit is used for sealing cable connections from 1-5/8 inches or 1-1/4 inches down to 1/4 inches through 1/2 inches. It includes an EPDM rubber tube and sealing foam strip. Purchasing options include calling or emailing for a quote, and the item can be expedited for same-day shipping. Launch 3 Telecom is described as providing quality customer service and a range of telecommunications products and services.
Topsides UK 2016 - How to save money safely - Michail TzouvelekisMichail Tzouvelekis
The document discusses how Drager, a safety equipment manufacturer, can help oil and gas companies save money safely. It outlines three drivers increasing costs for oil and gas operators, three common things known about Drager, and three less known facts. It then describes three common problems clients face and three solutions Drager provides, like single sourcing equipment, rentals, and training. Examples are given of how Drager has saved clients money through asset management, more cost efficient designs, and acting as a single source supplier. The document promotes Drager's ability to be a one-stop shop for complete safety solutions and services.
Brand Energy & Infrastructure Services is a global leader in industrial services with over 150 years of experience. It has a presence in over 30 countries through over 300 branches. The document provides information on Brand's focus on safety, listing the five pillars of its safety program which include employee intervention systems, supervisor observation systems, management safety reviews, gold link audits, and brand learning network. It emphasizes that safety is the top priority in all its operations.
These Seven Simple Steps to Life Safety help readers test how well buildings are equipped to respond to a fire in order to save lives and prevent property loss.
- The Management of Health & Safety at Work Regulations 1999 requires all employers to conduct fire risk assessments to identify fire hazards and measures needed to comply with fire safety regulations.
- A fire risk assessment involves identifying potential fire hazards, who may be at risk, evaluating the risk of a fire starting and spreading, and recording the assessment findings and any resulting actions.
- Key fire hazards to consider include potential ignition sources, sources of fuel for a fire, and oxygen supply which could help a fire to grow or spread. Appropriate controls should then be implemented to reduce or remove fire hazards and minimize the risks.
How to Make a Field Mandatory in Odoo 17Celine George
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
More Related Content
Similar to Shredding Standards: Understanding DIN 66399, BS EN 15713 and CPNI.
SG World provides various solutions to help businesses manage visitors, contractors, and inspections on their premises. They offer products like ID passes, electronic visitor management systems, contractor authorization systems, work permits, and safety inspection documentation. SG World has over 40 years of experience developing these types of compliance and safety solutions to help customers manage people and ensure regulatory compliance. They operate worldwide with headquarters in the UK and offices in the US and Europe.
This document provides a selection guide and price list for security products from Gunnebo in 2014. It includes:
- An overview of Gunnebo's product range including brands for cash/fire protection (Chubbsafes), underfloor safes (Churchill Safes), and document protection (Rosengrens).
- Information on choosing a suitable product by identifying security objectives and definitions of locking options.
- Details on Gunnebo's planning, delivery, and installation services to ensure a flexible and thorough selection process.
Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual, Shorum Toko Grc Borongan Meter Gambir - Gambir - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc Borongan Meter Kebon Kelapa - Gambir - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc Borongan Meter Petojo Utara - Gambir - Jakarta Pusat.
Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual, Shorum Toko Grc Borongan Meter Duri Pulo - Gambir - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc Borongan Meter Cideng - Gambir - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc Borongan Meter Petojo Selatan - Gambir - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil
Harga Jual Shorum Toko Grc Borongan Meter Bendungan Hilir - Tanah Abang - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum, Toko Grc Borongan Meter Karet Tengsin - Tanah Abang - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc Borongan Meter Kebon Melati - Tanah Abang - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc Borongan Meter Kebon Kacang - Tanah Abang - Jakarta Pusat.
Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual, Shorum Toko Grc Borongan Meter Kampung Bali - Tanah Abang - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc, Borongan Meter Petamburan - Tanah Abang - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc Borongan Meter Gelora - Tanah Abang - Jakarta Pusat.
Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual, Shorum Toko Grc Borongan Meter Menteng - Menteng - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc Borongan Meter Pegangsaan - Menteng - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc Borongan Meter Cikini - Menteng - Jakarta Pusat.
Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc Borongan Meter Kebon Sirih - Menteng - Jakarta Pusat, Jasa Pasang Gypsum Tukang Plafon Partisi Kanopi Rangka Atap Bajaringan List Profil Harga Jual Shorum Toko Grc Borongan Meter Gondangdia - Menteng - Jakarta Pusat, Jasa Pasang Gypsum Tukang
Clean Seal, Inc. is a manufacturer and distributor of extruded rubber and plastic seals, springs, hose, molded products, and trim moldings located in South Bend, Indiana. Founded in 1978, Clean Seal serves hundreds of industries and prides itself on its technical expertise, large inventory, and ability to ship stock items quickly. Clean Seal focuses on continuous innovation and lean manufacturing to provide custom solutions and meet customers' sealing and insulation needs.
Devastating grain dust explosions have been recorded for decades as the risk of flour dust ignition is so high. Without adequate controls and safety measures, grain flour explosions have been known to level entire milling facilities and take lives. While mill owners are making the effort to comply with DSEAR and ATEX regulations to ensure their staffs’ safety, the execution of preventive measures has not always been correct. Many milling facilities share common problems when it comes to the installation of protective equipment. In some cases, they inadvertently exclude “fail-safes” where necessary.
This document provides product information and purchasing details for an Andrew 245173 3M Cold Shrink Kit. The kit is used for sealing cable connections from 1/2 inch to 3/8 inch cables. It includes an EPDM rubber tube and sealing foam strip. To purchase, customers can call or email the company for pricing or to request a quote. Same day shipping is available for orders placed before 3pm EST.
TM Insight founder and director Travis Erridge is considered Australia's leading project consultant when it comes to high-bay warehousing development. Here are his Top 5 areas to consider when contemplating a development of this nature.
Dräger Gas & Flame Detectors (Fixed & Portable Detection)Thorne & Derrick UK
This document discusses gas detection systems from Dräger Safety. It notes that Dräger has over 70 years of experience in gas detection technology and focuses on innovation through in-house research. Their gas detection systems use modular designs that allow for expansion, modification, and modernization of existing systems. Dräger aims to provide customized solutions through a detailed analysis and consultation process to meet individual customer needs.
Clean Seal Molded Specialties specializes in custom bumpers for docks/vehicles of all kinds. From backing your tractor trailer to a dock or your boat to a pier/dock. We have a custom or stock solution to suit your needs to protect your equipment and recreational vehicles.
Leading Double Compression Cable Glands Manufacturer in IndiaGIE Cable Glands
Gie Cable Gland (Suryoday Enterprise) is a one of the leading Brass Double Cable Gland Manufacturers, Suppliers & Exporters in India, Based in Jamnagar, Gujarat.
Burnings in industrial estates cause damage amounting to billions every year. If people are hurt or injured, investigations
will always be implemented in order to find out whether the management has arranged in advance for all necessary precautionary
measures concerning fire protection. Even if the tangible assets are normally subject to insurance cover, the
effects on business, like e.g. a long-term loss in production with all its consequences are often underestimated.
1. There are several types of lens materials that can be used in infrared windows, with the choice driven by the application environment and transmission requirements.
2. Common lens materials include germanium, zinc selenide, and sapphire - each with their own transmission properties and temperature ranges.
3. The lens material must be able to withstand the environmental conditions inside the enclosure, have suitable infrared transmission, and meet any certification or safety standards.
The document provides information about Cortem Group, an Italian company that specializes in explosion-protected electrical equipment. It discusses Cortem's 40+ years of experience, its product lines including lighting fixtures, junction boxes, and control panels. It also covers Cortem's certifications, quality standards, worldwide partners and distributors, and customized engineered solutions.
This document provides product information and purchasing details for an Andrew 245172 3M Cold Shrink Kit. The kit is used for sealing cable connections from 1-5/8 inches or 1-1/4 inches down to 1/4 inches through 1/2 inches. It includes an EPDM rubber tube and sealing foam strip. Purchasing options include calling or emailing for a quote, and the item can be expedited for same-day shipping. Launch 3 Telecom is described as providing quality customer service and a range of telecommunications products and services.
Topsides UK 2016 - How to save money safely - Michail TzouvelekisMichail Tzouvelekis
The document discusses how Drager, a safety equipment manufacturer, can help oil and gas companies save money safely. It outlines three drivers increasing costs for oil and gas operators, three common things known about Drager, and three less known facts. It then describes three common problems clients face and three solutions Drager provides, like single sourcing equipment, rentals, and training. Examples are given of how Drager has saved clients money through asset management, more cost efficient designs, and acting as a single source supplier. The document promotes Drager's ability to be a one-stop shop for complete safety solutions and services.
Brand Energy & Infrastructure Services is a global leader in industrial services with over 150 years of experience. It has a presence in over 30 countries through over 300 branches. The document provides information on Brand's focus on safety, listing the five pillars of its safety program which include employee intervention systems, supervisor observation systems, management safety reviews, gold link audits, and brand learning network. It emphasizes that safety is the top priority in all its operations.
These Seven Simple Steps to Life Safety help readers test how well buildings are equipped to respond to a fire in order to save lives and prevent property loss.
- The Management of Health & Safety at Work Regulations 1999 requires all employers to conduct fire risk assessments to identify fire hazards and measures needed to comply with fire safety regulations.
- A fire risk assessment involves identifying potential fire hazards, who may be at risk, evaluating the risk of a fire starting and spreading, and recording the assessment findings and any resulting actions.
- Key fire hazards to consider include potential ignition sources, sources of fuel for a fire, and oxygen supply which could help a fire to grow or spread. Appropriate controls should then be implemented to reduce or remove fire hazards and minimize the risks.
Similar to Shredding Standards: Understanding DIN 66399, BS EN 15713 and CPNI. (20)
How to Make a Field Mandatory in Odoo 17Celine George
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
A Visual Guide to 1 Samuel | A Tale of Two HeartsSteve Thomason
These slides walk through the story of 1 Samuel. Samuel is the last judge of Israel. The people reject God and want a king. Saul is anointed as the first king, but he is not a good king. David, the shepherd boy is anointed and Saul is envious of him. David shows honor while Saul continues to self destruct.
Gender and Mental Health - Counselling and Family Therapy Applications and In...PsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...PECB
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Walmart Business+ and Spark Good for Nonprofits.pdfTechSoup
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
This presentation was provided by Racquel Jemison, Ph.D., Christina MacLaughlin, Ph.D., and Paulomi Majumder. Ph.D., all of the American Chemical Society, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.
Leveraging Generative AI to Drive Nonprofit InnovationTechSoup
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
2. ONE GOAL: DESTRUCTION.
Regardless of what materials you want to destroy, what sort of organisation you work for, and
what sort of data you collect, you choose to shred documents for the fundamental reason
that you do not want your paperwork or confidential materials to be recovered. You want to
ensure the fragments of your paper – even if shredding a single sheet – cannot be put back
together.
The development of shredding standards such as DIN 66399, EN 15713 and CPNI ensure that,
when standards are met, reassembly is not possible – not even for a single sheet.
But what does this all mean?
When considering the destruction of confidential materials, it’s important to know what the
different shredding standards mean. This will enable you to ensure the shred standard you
require is met.
If you’ve ever used a home or office shredder, you may be familiar with DIN 66399 standards
as these are mostly focused on shred size. If you’re using a shredding service provider, you’re
probably looking for EN 15713 as the standard encompasses more than shred size; it covers
staff vetting, depot security, storage of confidential materials and more. CPNI (Centre for the
Protection of National Infrastructure) requirements are something different altogether. This is
because the standard is defined around the requirements needed to safely destroy Top
Secret government materials.
This guide will break down the specifics of each standard without technical lexis or jargon. By
the end, you will be confident in what these standards mean, and will know what standards
you need to look for.
0800 035 3395
www.shredstation.co.uk
Page 1
Shredding standards: DIN, EN 15713 & CPNI explained
3. DIN 66399 STANDARDS
0800 035 3395
www.shredstation.co.uk
Page 2
Shredding standards: DIN, EN 15713 & CPNI explained
DIN (Deutsches Institut für Normung, translated to the German Institute for Standardisation) has
thousands of standards that cover many fields. The DIN 66399 standard is the German national
standard for shredding. DIN 66399 focuses mainly on shred size rather than overall security.
Why do so many organisations and products refer to DIN standards?
The reason DIN standards might sound familiar is that most household shredders specify the
DIN 66399 standard shred sizes in their product descriptions. For example, your household
paper shredder may shred to DIN Level 1 security (known as P-1).
What does this mean?
Under DIN 66399 standards, there are two main areas of focus.
• The first is the classification of data.
• The second is shred particle sizes, defined by levels of security.
How is data classified?
Data is classified by DIN into protection classes. These classes are determined by how much
protection that data needs.
• Class 1 is data there is a normal need for. While this data could contain personal information
and should be protected, there is only a slight to moderate risk that any individual or business
would be adversely affected by the unlawful access of this data. An example of Class 1 data
could be a business telephone list or address details.
• Class 2 is data where there is a high demand for confidentiality. Unauthorised access to
Class 2 information could risk an individual or a company experiencing significant adverse
impairments. This could be financial or personal. An example of Class 2 data could be items
such as company balance sheets or a HR department’s personnel files.
• Class 3 data is data with a requirement for a very high level of confidentiality. With Class 3
data, there must be a guarantee of protection of personal data. It also includes any data
where the disclosure could pose a significant risk to health or even life. Some examples of
Class 3 data could be Top Secret government documents or information that could identify
individuals in witness protection.
4. 0800 035 3395
www.shredstation.co.uk
Page 3
Shredding standards: DIN, EN 15713 & CPNI explained
DIN 66399 STANDARDS
What are the levels of security?
DIN has determined seven levels of security that shred sizes represent. Level 1 is the lowest
level of security and the largest particle size. Level 7 is the highest level of security and the
smallest particle size.
In general, Security Levels 1, 2 and 3 are generally recommended for Class 1 data. Class 2
data is usually recommended to be shredded to Level 3, 4 or 5. Class 3 data is recommended
to be shredded to Security Level 4, 5, 6 or 7.
Using a household shredder as an example again, a DIN Level 1 (P-1) household shredder will
slice paper into strips of approximately 12mm in width. For an A4 piece of paper, this works out
to be around 17 or 18 strips.
One thing to remember with DIN is that the level parameters change across materials. For
example, for paper materials to meet DIN Level 3 (P-3), the paper should be shredded to be
smaller than or equal to 320mm². For electronic data media to fit under the scope Level 3
(E-3), the particle size must be a maximum of 160mm².
A full guide to DIN 66399 shred sizes can be found in Appendix 1.
Shred size is important to consider, but wider security measures, such as those set out by EN
15713, are a better indicator of how secure a shredding service is.
DIN 66399 PAPER LEVEL EXAMPLES*
*Please note, these sizes are to scale when viewed or printed at A4 sizing. Sizes are less than or equal to DIN standards maximum particle size.
P-1
P-2
P-3
P-4
P-5
P-6
P-7
5. EN 15713 STANDARDS
0800 035 3395
www.shredstation.co.uk
Page 4
Shredding standards: DIN, EN 15713 & CPNI explained
EN 15713 standards are a list of standards and recommendations for the management and
control of confidential material destruction. They cover the whole process, from collection to
destruction, plus onward recycling and vetting of personnel and site security.
A summary of these security measures, as outlined in the BS EN 15713 Code of Practice, are
below.
• Company Facilities
The company should have an office or operational centre for keeping business documents,
records, files etc., and this space should be separate from other business or activities on the
same site.
• Security
The company premises should have approved intruder alarm systems which cover processing,
storage and office areas. There should also be closed-circuit CCTV recording the unloading,
storage and processing areas. The company must keep all CCTV for a minimum of 31 days
unless an alternative agreement is in place with the company’s client. Authorised visitors can
visit operational areas if supervised by appropriately screened personnel. Unauthorised visitors
should not have access to operational areas.
• Contracts and Audit Trail
Between all clients and the company, there should be a contract covering all transactions.
This contract should be in writing.
• Sub-contracting
If a company sub-contracts work where the sub-contractor destroys confidential material, the
sub-contractor must also conform to EN 15713 standards. In every instance where a company
uses a sub-contractor, they must inform the client.
• Security Screening of Personnel
Businesses should screen all staff in the business to BS7858 standards and each member of staff
must sign a deed of confidentiality. BS7858 screening involves DBS checks, credit checks, five
years of written employment verification and any gap verification. It also involves character
references and right-to-work checks.
• Retention of Confidential Material
Confidential materials that are collected for destruction must be destroyed within one working
day from the time of arrival at the destruction centre.
6. EN 15713 STANDARDS
0800 035 3395
www.shredstation.co.uk
Page 5
Shredding standards: DIN, EN 15713 & CPNI explained
• Collection of Confidential Material
All collections of confidential material should be made by properly trained staff. They must
wear identifiable clothing and carry photo ID. All materials collected should be protected
from unauthorised access at every step, from collection until destruction is complete. Where
possible, confidential materials collected should also be stored in secure locked containers or
containers secured by an individually numbered security seal.
• Off-Site Collection Vehicles
Off-site shredding vehicles should be box-bodied or have a secure demountable container.
They should also be fitted with lockable or sealable doors, as well as electro-mechanical
immobilisers or alarm systems. They should be immobilised or alarmed when left unattended,
and be locked and locked/sealed during transit. The vehicle operatives must have a clear line
of communication available for contact with the company at all times.
• On-Site Shredding Vehicles
On-site shredding vehicles should be box-bodied and fitted with lockable or sealable doors.
Vehicles should never be left unattended when unprocessed confidential materials are on
board. Nor should any unprocessed confidential material be removed from the client’s site. As
with the off-site collection vehicles, the operatives in on-site vehicles must have a clear line of
communication with the company, either by phone or radio.
• End Product Disposal
Businesses should recycle all recyclable materials where practicable. Where recycling isn’t
possible, companies should consider the environmental impacts, costs, and convenience of
using other waste disposal methods. At Shred Station, we recycle 100% of the paper we shred
and all other materials where we can. Non-recyclable materials are used to generate Energy
from Waste. Nothing we shred goes to landfill.
BS EN 15713 standards also consider material types and shred sizes. These shred sizes should be
suitable for rendering the material unreadable, illegible and not possible to reassemble.
We outline these sizes and materials in Appendix 2.
7. CPNI STANDARDS
0800 035 3395
www.shredstation.co.uk
Page 6
Shredding standards: DIN, EN 15713 & CPNI explained
The Centre for the Protection of National Infrastructure (CPNI) is the UK government’s national
authority for physical and personnel protective security. It works to protect national security
and reduce vulnerability to espionage, sabotage, and terrorism. It does this by working with
partners responsible for infrastructure sectors such as the government, organisations within the
critical national infrastructure, and security specialists such as the police.
The CPNI standard for shredding provides organisations with the procedures, processes and
performance monitoring necessary to securely destroy sensitive materials that are classified as
Secret or Top Secret.
Some of the elements of the standard are detailed below, and the full standard can be found
here.
• Secure Destruction Policy
The owner must maintain a secure and effectively managed destruction policy.
• Destruction Equipment
The outcome of destruction must be that items are no longer sensitive. It must be possible for
an authorised person to visually confirm the destruction of their sensitive items.
Destruction equipment must be operated by authorised, trained personnel who are regularly
assessed.
Destruction equipment must be serviced and maintained in line with the manufacturer’s
instructions and performance of the equipment should be monitored and documented.
Equipment usage instructions must also be available at the point of use of the destruction
equipment.
Equipment should be installed within a secure area only accessible by authorised personnel.
When the equipment is installed, modified or decommissioned, the person/s performing the
work must produce a report including a technical description of work or modifications. There
must also be regular integrity inspections of equipment.
• Personnel
Personnel with access to sensitive items must sign non-disclosure agreements.
Those with unaccompanied access to sensitive items must have documented authorisation
by the owner. The owner may at their discretion grant access to sensitive items to people who
are not authorised. When this happens, they should be accompanied and observed, with at
least one authorised person for every two without authorisation. Records of this must be kept.
8. CPNI STANDARDS
0800 035 3395
www.shredstation.co.uk
Page 7
Shredding standards: DIN, EN 15713 & CPNI explained
• Storage of Sensitive Items
When materials are stored in holding areas, these areas must be at least as secure as the areas
where documents were originally stored or used.
Sensitive items pending destruction must be physically separate from non-sensitive items. This
must be a separate room or holding container.
• Tracking of Sensitive Items
Sensitive items must be tracked throughout the destruction process and there must be proof
of tracking. Tamper-evident seals should also be used and checked throughout the process.
Full details of tracking requirements can be found in the complete CPNI standard.
• Verification of Custodians and Their Vehicles
The owner and custodian must have a documented procedure to identify and verify custodi-
ans and their vehicles. There should be a denial of access to sensitive items until all personnel
and vehicles are verified.
• Transport of Sensitive Items
The CPNI standard for transport of sensitive items covers many areas including vehicle security
features, transport procedures, how sensitive items and non-sensitive items are segregated,
and the presence of authorised personnel. Full details are available in the complete CPNI
standard.
• Business Continuity Procedures
Maximum legal driving hours should be taken into account to minimise unplanned stops. A
replacement crew must be available to complete the journey if the vehicle crew is unable to
complete the transportation of sensitive items due to exceeding maximum driving hours or
any other unforeseen circumstances. If a vehicle is no longer able to deliver sensitive items, for
instance, in the event of a breakdown, a replacement vehicle must be available. Loading into
the replacement vehicle must occur within a secure perimeter, and an inventory must be
taken.
• External Destruction Facilities
When destroying sensitive items at a destruction facility, the procedure must be observed and
attended by at least one authorised person.
The facility must have a secure perimeter and sensitive items must be destroyed within 24 hours
of arriving at the facility.
Sensitive items from different owners must be separated within the destruction area, and any
9. CPNI STANDARDS
0800 035 3395
www.shredstation.co.uk
Page 8
Shredding standards: DIN, EN 15713 & CPNI explained
personnel in this area must be accompanied by one or more authorised people.
If an event would prevent the timely destruction of sensitive items, there must be an agreed
and documented procedure in place between the owner and the destruction facility to
ensure the emergency storage or alternative destruction of sensitive items.
• Mobile Destruction Facilities
Sensitive items processed by a mobile destruction facility must be observed and attended by
an authorised person at all times. Facilities should have secure perimeters, and vehicles must
be fitted with security features including an audible anti-theft alarm and immobiliser.
• Tamper-evident Seals
When used, tamper-evident seals must be used properly and personnel should be trained to
document and verify the serial numbers of these seals and to spot signs of tampering.
• Compromise Procedures
There must be documented procedures for custodians to identify and record suspected,
potential, attempted or confirmed compromises of sensitive items.
• Use of Service Providers
Each service provider and any sub-contractors must have a written contract with the owner.
They must also hold professional indemnity insurance, and the service provider must have the
prior written approval of the owner before sub-contracting.
In addition to the above, there are also specified destruction outcomes (particle sizes)
required for different materials destroyed through shredding.
The destruction outcomes for shredding can be seen in Appendix 3.
10. SECURITY LEVEL PARTICLE SIZE
SECURITY
LEVEL
PARTICLE
SIZE
STRIP
WIDTH
SECURITY LEVEL
SECURITY LEVEL
PARTICLE SIZE
PARTICLE SIZE
Appendix 1 - DIN Sizes
0800 035 3395
www.shredstation.co.uk
Appendix 1
Shredding standards: DIN, EN 15713 & CPNI explained
The information cited in the table above is taken from the DIN 66399 Code of Practice, cited by the German Society for Data Protection and Data
Security and PRODevice EU. It is correct at the time of publication, July 20th 2022.
SECURITY LEVEL
SECURITY LEVEL PARTICLE SIZE
PARTICLE SIZE
PAPER DOCUMENTS
OPTICAL DATA MEDIA
MAGNETIC TAPE MEDIA
ELECTRONIC DATA MEDIA
HARD DRIVES MAGNETIC DATA MEDIA
INFORMATION IN REDUCED FORMS
P-1
P-2
P-3
P-4
P-5
P-6
P-7
O-1
O-2
O-3
O-4
O-5
O-6
O-7
T-1
T-2
T-3
T-4
T-5
T-6
T-7
E-1
E-2
E-3
E-4
E-5
E-6
E-7
H-1
H-2
H-3
H-4
H-5
H-6
H-7
F-1
F-2
F-3
F-4
F-5
F-6
F-7
≤ 2000 mm²
≤ 800 mm²
≤ 320 mm²
≤ 160 mm²
≤ 30 mm²
≤ 10 mm²
≤ 5 mm²
≤ 12 mm
≤ 6 mm
≤ 2 mm
6 mm
2 mm
≤ 1 mm
≤ 1 mm
max 2000 mm²
max 800 mm²
max 160 mm²
max 30 mm²
max 10 mm²
max 5 mm²
max 0.2 mm²
mechanically inoperable
max 2000 mm²
max 320 mm²
max 160 mm²
max 30 mm²
max 10 mm²
max 2.5 mm²
mechanically inoperable
split
max 160 mm²
max 30 mm²
max 10 mm²
max 1 mm²
max 0.5 mm²
mechanically inoperable
damaged
deformed
max 2000 mm²
max 320 mm²
max 10 mm²
max 5 mm²
max 160 mm²
max 30 mm²
max 10 mm²
max 2.5 mm²
max 1 mm²
max 0.5 mm²
max 0.2 mm²
11. Appendix 2 - EN 15713 Sizes
0800 035 3395
www.shredstation.co.uk
Appendix 2
Shredding standards: DIN, EN 15713 & CPNI explained
MATERIAL-SPECIFIC SHRED AND DISINTEGRATION
TABLE TO SHOW CATEGORIES OF CONFIDENTIAL MATERIAL
SHRED
NO.
AVERAGE
SURFACE
AREA OF
MATERIAL
MAX
CUTTING
WIDTH
1
2
3
4
5
6
7
8
mm² mm
METHOD OF DESTRUCTION MATERIAL CATEGORIES
√ Acceptable
x Unsuitable for material
5000
3600
2800
2000
800
320
30
10
25
60
16
12
6
4
2
0.8
Shred
Shred
Shred
Shred
Shred or disintegrate
Shred or disintegrate
Disintegrate
Disintegrate
√
√
√
√
√
√
n/a
n/a
X
X
X
X
X
X
√
√
√
√
√
√
n/a
n/a
n/a
n/a
√
√
√
√
√
√
√
√
X
X
X
X
√
√
√
√
√
√
√
√
n/a
n/a
n/a
n/a
A B C D E F G H
a b b
b
a Materials in category D should be destroyed so that information is unreadable and subject to secure disposal.
Client and specific material.
CATEGORY DESCRIPTION
A
B
C
D
E
F
G
H
Paper, plans, documents and drawings
SIM cards and negatives
Video/Audio tapes, diskettes, casettes and film
Computers including hard drives, embedded software, chip card readers,
components and other hardware.
ID cards, CDs and DVDs
Counterfeit goods, printing plates, microfiche, credit and store cards and
other products
Corporate or branded clothing and uniforms
Medical X-Rays and overhead projector slides
NOTE Hazardous waste is not included in this table. Users are advised of the existence of legislation
applicable to the destruction and/or disposal of hazardous waste.
The information cited in the tables above is taken from the BSIA Information Destruction BS EN 15713:2009 - A Complete Guide.
It is correct at the time of publication, July 20th 2022.
12. Appendix 3 - CPNI Sizes
0800 035 3395
www.shredstation.co.uk
Appendix 3
Shredding standards: DIN, EN 15713 & CPNI explained
SENSITIVE ITEM
DESTRUCTION OUTCOMES FOR MATERIALS PROCESSED THROUGH SHREDDING
DIGITAL MEMORY
FLOPPY DISK
HARD DISK
MAGNETIC TAPE
MICROFORM
OPTICAL DISK
PAPER*
SIM OR SMART CARD
VISUAL DISPLAY UNIT
6mm (any direction) particle
6mm (any direction) particle
6mm (any direction) particle
6mm (any direction) particle
2mm (any direction) particle
2mm (any direction) particle
60mm²
2mm (any direction) particle
6mm (any direction) particle
REQUIRED OUTCOME
* For shredding paper printed with 12pt Times New Roman font, the width along the line of the text should be no more
than 4mm, such that no more than two adjacent characters are visible on a single particle. A narrower cut width may
be necessary where smaller font sizes are present.
The information cited in the table above is taken from the CPNI Secure Destruction of Sensitive Items Standard.
It is correct at the time of publication, July 20th 2022.