Shearing fixture
•
2 likes•515 views
This document summarizes a presentation on C-scan ultrasonic non-destructive testing and a shearing fixture for brazed joints. It describes how C-scan uses ultrasound to detect flaws in brazed joints by producing a 2D image of the bonding interface. It explains the principles of pulse-echo techniques used in C-scan. It also describes how a shearing fixture was designed to test the shear strength of brazed joints, noting the advantages of using a fixture over other testing methods. Confirmation of test results is done through milling and mechanical tests that are compared to previous C-scan and bonding percentage measurements.
Report
Share
Report
Share
Recommended
eddy current tubular inspection services broucher
Eddy current testing is a non-destructive testing technique that uses electromagnetic induction to detect surface and shallow subsurface defects in conductive materials like metals. Abdallah I. Al Tamimi Industrial Services Est offers eddy current testing of tubular components using remote field testing and near field testing methods. This allows detection of defects in ferrous and non-ferrous tubes with high inspection rates.
Transcat and Fluke Present: Precision Shaft Alignment Made Easy
The document discusses precision laser shaft alignment using the Fluke 830 Laser Alignment tool. It provides an overview of the benefits of precision alignment, describes laser alignment principles and the Fluke tool. The Fluke tool allows for quick, easy, and precise alignment in 3 steps: setup, measurement, and diagnosis/correction. It provides intuitive guidance and diagnostic information to correctly align shafts and maximize machine reliability and uptime.
Engineering fundamentals
This document discusses engineering fundamentals related to threaded fastener design and analysis. It covers topics such as modeling the tightening process, where torque goes during tightening, elastic torque-tension relationships, stress-strain vs. torque-tension correlations, force-deformation and torque-angle diagrams, preload efficiency factors, torque-tension correlation coefficients, and automated tightening processes. The document provides information to help understand the relationship between torque, angle, and tension during fastener tightening. It also discusses using torque-angle signature analysis to evaluate fastener tightening and control clamp load.
Hardness & Force Testers by ACMAS Technologies Pvt Ltd.
Hard Force Meters are equipments that are widely used in several research organizations to measure the force that has been applied to a given sample during a test.
M.Tech Structural Engineering Project of Voided and Cellular Deck slab Bridge
This document discusses voided deck slabs and cellular deck slabs. It provides an overview of different types of voided slabs based on span range and material. It also describes analyzing voided slabs using orthotropic plate theory, grillage analogy, or 3D modeling. The document outlines manual analysis steps taken and challenges faced in modeling a sample voided slab in Midas Civil software. It includes diagrams of the sample voided slab plan and cross-section. A schedule outlines the status of analyzing voided and cellular deck slabs using manual and software methods.
Testing/Manufacture/Izod Impact Tester For Metal Testing
This document provides information about a metal Izod impact tester from FEC, an ISO 9001 certified company. The impact tester works on the pendulum principle to measure the impact energy absorbed when a specimen ruptures. It has safety guards and a two-hand operation for releasing the pendulum. Test results are directly indicated on the calibrated dial. The document lists the specifications for Charpy and Izod impact tests conducted on the machine, including pendulum weight, speed, drop angle, and tolerances.
Testing/Manufacture/metal izod impact tester
This document provides information about a metal Izod impact tester from FEC, an ISO 9001 certified company. The impact tester works on the pendulum principle to measure the impact energy absorbed when a specimen ruptures. It has safety guards and a two-hand operation for releasing the pendulum. Test results are directly indicated on the calibrated dial. The document lists the specifications for Charpy and Izod impact tests conducted on the machine, including pendulum weight, speed, drop angle, and tolerances.
Armature & field coil inspection
This document outlines procedures for testing armature and field coils. There are two tests for armatures: 1) a growler machine test to check for insulation issues, and 2) a multimeter test to check for continuity and balancing. There are also two tests for field coils: 1) a multimeter test to check for continuity and insulation, and 2) an aesthetics check for damage or rust. Both the armature and field coil must pass all listed tests in the conclusions in order to be approved for use.
Recommended
eddy current tubular inspection services broucher
Eddy current testing is a non-destructive testing technique that uses electromagnetic induction to detect surface and shallow subsurface defects in conductive materials like metals. Abdallah I. Al Tamimi Industrial Services Est offers eddy current testing of tubular components using remote field testing and near field testing methods. This allows detection of defects in ferrous and non-ferrous tubes with high inspection rates.
Transcat and Fluke Present: Precision Shaft Alignment Made Easy
The document discusses precision laser shaft alignment using the Fluke 830 Laser Alignment tool. It provides an overview of the benefits of precision alignment, describes laser alignment principles and the Fluke tool. The Fluke tool allows for quick, easy, and precise alignment in 3 steps: setup, measurement, and diagnosis/correction. It provides intuitive guidance and diagnostic information to correctly align shafts and maximize machine reliability and uptime.
Engineering fundamentals
This document discusses engineering fundamentals related to threaded fastener design and analysis. It covers topics such as modeling the tightening process, where torque goes during tightening, elastic torque-tension relationships, stress-strain vs. torque-tension correlations, force-deformation and torque-angle diagrams, preload efficiency factors, torque-tension correlation coefficients, and automated tightening processes. The document provides information to help understand the relationship between torque, angle, and tension during fastener tightening. It also discusses using torque-angle signature analysis to evaluate fastener tightening and control clamp load.
Hardness & Force Testers by ACMAS Technologies Pvt Ltd.
Hard Force Meters are equipments that are widely used in several research organizations to measure the force that has been applied to a given sample during a test.
M.Tech Structural Engineering Project of Voided and Cellular Deck slab Bridge
This document discusses voided deck slabs and cellular deck slabs. It provides an overview of different types of voided slabs based on span range and material. It also describes analyzing voided slabs using orthotropic plate theory, grillage analogy, or 3D modeling. The document outlines manual analysis steps taken and challenges faced in modeling a sample voided slab in Midas Civil software. It includes diagrams of the sample voided slab plan and cross-section. A schedule outlines the status of analyzing voided and cellular deck slabs using manual and software methods.
Testing/Manufacture/Izod Impact Tester For Metal Testing
This document provides information about a metal Izod impact tester from FEC, an ISO 9001 certified company. The impact tester works on the pendulum principle to measure the impact energy absorbed when a specimen ruptures. It has safety guards and a two-hand operation for releasing the pendulum. Test results are directly indicated on the calibrated dial. The document lists the specifications for Charpy and Izod impact tests conducted on the machine, including pendulum weight, speed, drop angle, and tolerances.
Testing/Manufacture/metal izod impact tester
This document provides information about a metal Izod impact tester from FEC, an ISO 9001 certified company. The impact tester works on the pendulum principle to measure the impact energy absorbed when a specimen ruptures. It has safety guards and a two-hand operation for releasing the pendulum. Test results are directly indicated on the calibrated dial. The document lists the specifications for Charpy and Izod impact tests conducted on the machine, including pendulum weight, speed, drop angle, and tolerances.
Armature & field coil inspection
This document outlines procedures for testing armature and field coils. There are two tests for armatures: 1) a growler machine test to check for insulation issues, and 2) a multimeter test to check for continuity and balancing. There are also two tests for field coils: 1) a multimeter test to check for continuity and insulation, and 2) an aesthetics check for damage or rust. Both the armature and field coil must pass all listed tests in the conclusions in order to be approved for use.
Welding automation ppt
Arcraft provides automated welding systems to improve welding quality and productivity while reducing costs. Their equipment includes welding oscillators, positioners, guns, columns, booms, cross slides, lathes, turntables, wire feeders, seam trackers, and tank rotators. These systems automate welding to enhance the working environment. Features include precision mechanisms, enclosure, controllability, stroke control, and duplication elimination. The document provides details on various automation equipment and their advantages in improving welding processes.
Alignment Systems July 2009 En
The document discusses PRÜFTECHNIK's history and products for shaft alignment and industrial measurement. It began with laser-optical shaft alignment and now offers a range of products for alignment of horizontal and vertical machinery using various measurement methods. These products are used across many industries, and PRÜFTECHNIK also provides worldwide service for complex alignment applications and geometric measurements.
Strain rosette
A strain rosette is an arrangement of three strain gauges placed in arbitrary directions on a surface to measure normal strain. Single strain gauges can only measure strain in one direction, while a rosette allows measurement in multiple directions for a more precise evaluation. There are three main types of rosettes: tee, rectangular, and delta. Strain rosettes are commonly used to monitor stress on bridges, buildings, and rails by measuring and comparing real strains to analytical models.
Kaizen
The document describes improvements made to a welding fixture for a shaft assembly process. Previously, the fixture used a limit switch to check that locating pins were inserted correctly into the shaft before allowing welding. This sometimes led to incorrect welding angles. To address this, the fixture was improved to automate angle checking using a limit switch on a lever, which only allows welding when both pins are inserted at the right angle. This countermeasure ensured welding only occurs at the proper angle specified in drawings.
Robotic welding
This deals about the types of welding robots that are using in the industries which increase the productivity rate and reduce manual operations.
MANUFACTURING TECHNOLOGY-II - UNIT-2- Over View
The document provides an overview of turning machines and lathe operations. It discusses different types of lathes like speed lathes, engine lathes, and capstan lathes. It describes the main parts of a lathe like the headstock, bed, carriage, and tailstock. It also covers lathe operations, cutting tools, chucks, and holding workpieces.
Knob Testing Fixture
This document presents a fixture designed for flexivity testing of plastic knobs used in MCCBs. It summarizes the need for a permanent fixture, issues with temporary arrangements, and the working principle and design of the new fixture. The fixture allows knobs to be securely located and bent vertically to accurately measure load versus displacement. This permanent, multi-purpose fixture saves time over temporary arrangements and provides consistent flexivity testing of MCCB knobs.
IRJET- Development of Strain Measuring Instrument for Health Monitoring of St...
This document describes the development of a strain measuring instrument to monitor the health of structural members like RCC columns and beams. A mechanical strain gauge was developed consisting of gauge points and connecting rods welded to reinforcement bars, along with a dial indicator. Laboratory tests were conducted on steel specimens up to 150kN load to generate a calibration curve. Strain gauges were then fixed to columns and beams during construction. Readings from the structural members indicated strains up to 0.0003, within the elastic limit, confirming the structure's strength and safety. The instrument allows continuous health monitoring of structures throughout their lifespan.
Visual inspection on weldments By Kingston R
Visual examination is the most commonly used non-destructive testing method for inspecting welds. It involves directly or indirectly observing the exposed surfaces of welds and base metals. Proper lighting of at least 1000 Lux is needed. Various aids like mirrors, telescopes and cameras can be used. Key factors in visual inspection are the condition of the inspector's eyes, their understanding of the inspection situation, and being objective. The document discusses visual inspection guidelines and acceptance standards from codes like ASME and AWS, as well as common weld defects.
FEA Based Validation of Weld Joint Used In Chassis of Light Commercial Vehicl...
Generally automotive systems are subjected to dynam ic and static loads,due to hives driving and adverse conditions of the road surface,thus it causes cracks,noise,vibration and failure in an automobile,since in general the total effect of work for automobile system is lowered. Such effect is arising due to behaviour in types of loading,construction and condition of the work where the automobile system is and reducing it s strength. Therefore however most of the Light Commercial Vehicles (LCV) chassis are man ufactured by welding to reduce the weight of the chassis. Hence there is a more stress concentration occurs at a welded joint region. The fundamental task is to develop a model of welded joint to sustain various loads of LCV chassis. Effect of different design parameters,properties of material are observed with respect to the strength of the weld and location of stress concentrations are identified. During the design process model parameters are often alter ed to evaluate alternative welding joining choices,to reduce weight of the system to sustain varying loading conditions without failure.
Experimental evaluation of strain in concrete elements
The document describes experimental evaluation of strain in concrete elements. It discusses different methods of strain measurement including mechanical and electrical techniques. The mechanical method uses a mechanical strain gauge to measure displacement amplified through a linkage. The electrical method uses strain gauges connected to a Wheatstone bridge circuit to measure resistance changes due to deformation. An experiment was conducted to measure strain in concrete cubes and beams using both methods. The results show the recorded strains at different stress levels applied to the specimens.
Production skill,
The document provides information on various aspects of spot welding including:
- Definitions of key terms like spot weld, welding control, and the importance of force between electrodes.
- Explanations of spot welding principles involving resistance heating when current passes through interfaces of stacked metals joined by electrodes applying pressure.
- Advantages of spot welding as the quickest and most economical method for joining metals requiring no filler medium.
- Details on TPM system pillars like autonomous maintenance, planned maintenance, quality maintenance, and focused improvement to maintain production quality and equipment lifespan.
IRJET- Cantilever Beam Crack Detection using FEA and FFT Analyser
This document presents a method to detect cracks in cantilever beams using finite element analysis and natural frequency measurements. A cracked beam is modeled as two segments connected by a spring. Natural frequencies are obtained through FEA for uncracked and cracked beams. Equations relate the stiffness of the spring and crack location to changes in natural frequency. Plots of stiffness versus crack location from three modes intersect at the actual location. The method accurately predicts crack size and position to within 4% error. A case study applies the method to a cantilever beam, generating mode shapes through FEA and using equations to determine crack parameters from frequency data.
IRJET- Behavior of Beam Column Joint in RCC Frames Subjected to Lateral Loading
This document summarizes a research paper that analyzes the behavior of beam-column joints in reinforced concrete frames subjected to lateral loading using SAP2000 software. The paper models and analyzes 3, 10, 20, and 30-story reinforced concrete frames to compare the displacement, stress, shear force, and moment results when the beam-column joint is modeled as either fully rigid, fully ductile, or semi-rigid. Tables of results are presented comparing values at different story levels for the different joint rigidity assumptions. The objective is to determine an optimum joint rigidity that avoids fully rigid or fully ductile behavior.
Detection of Static Air-Gap Eccentricity in Three Phase induction Motor by Us...
This paper presents the effect of the static air-gap eccentricity on the performance of a three phase induction motor .The Artificial Neural Network (ANN) approach has been used to detect this fault .This technique depends upon the amplitude of the positive and negative harmonics of the frequency. Two motors of (2.2 Kw) have been used to achieve the actual fault and desirable data at no-load, half-load and full-load conditions. Motor Current Signature analysis (MCSA) based on stator current has been used to detect eccentricity fault. Feed forward neural network and error back propagation training algorithms are used to perform the motor fault detection. The inputs of artificial neural network are the amplitudes of the positive and negative harmonics and the speed, and the output is the type of fault. The training of neural network is achieved by data through the experiments test on healthy and faulty motor and the diagnostic system can discriminate between “healthy” and “faulty” machine.
Importance of ndt
Testing comprise all the techniques of materials or products under different types of loadings. This way, the reliability of product to end user is assured and the process of material selection is done with a lot of ease.
Testing can be classified in two main categories depending upon destruction of products as
Destructive Testing
Non-Destructive Testing
These comprises all those techniques which are highly regulated on some standard in which specimen is broken/destructed.
Major destructive testing used these days are
Tensile Testing
Impact Testing
Burst Testing
Fatigue Testing
Creep Testing
Non-destructive testing (NDT) is a wide group of analysis techniques used in science and industry to evaluate the properties of a material, component or system without causing damage.
Another terms for NDT is NDE
Highly valuable technique that can save both money and time in product evaluation.
Accident prevention and to reduce costs
To improve product reliability
To determine acceptance to a given requirement
To quick information on repair criteria.
Visual Inspection
Acoustic Emission
Eddy Current
Liquid Penetrant
X-Ray/ Radiography
Magnetic method
Visual and optical inspection (or testing) is still a basic method for many applications. Visual inspection involves using an inspector's eyes to look for defects. The inspector may also use special tools such as magnifying glasses, mirrors, or bore scopes to gain access and more closely inspect the subject area. Visual examiners follow procedures that range from simple to very complex.
Detection and analysis of AE signals can supply valuable information regarding the origin and importance of a discontinuity in a material.
It has many industrial applications
Assessing structural integrity (Welding)
Detecting flaws
Testing for leaks (Pressure Vessel)
Monitoring weld quality
Research tool.
In a standard eddy current testing a circular coil carrying current is which generates eddy current then the presence of any flaws, will cause a change in eddy current and a corresponding change in the phase and amplitude of the measured current.
Applications:
Surface Breaking Cracks
SBC using Sliding Probes
Tube Inspection Conductivity
Heat Treat Verification
In it the defects/cracks are studied using a penetrant/dye. low surface tension fluid penetrates into clean and dry surface-breaking discontinuities. Penetrant may be applied to the test component by dipping, spraying, or brushing. After adequate penetration time has been allowed, the excess penetrant is removed and a developer is applied. The developer helps to draw penetrant out of the flaw so that an invisible indication becomes visible to the inspector. Inspection is performed under ultraviolet or white light
X-rays are just like any other kind of electromagnetic radiation. They can be produced in parcels of energy called photons, just like light.
These are used to produce image
Virtual instrumentation for measurement of strain using thin film strain gaug...
This document summarizes the development of a virtual instrumentation system for measuring strain using thin film strain gauge sensors. Thin film strain gauges were deposited on a cantilever beam using sputtering deposition. A LabVIEW program was developed to acquire and plot the resistance changes in the strain gauges under different loads. The system uses National Instruments hardware including a data acquisition board and signal conditioning modules to measure microstrains with errors within 0.5%. Thin film strain gauges offer improved performance over conventional foil gauges and this system can be applied to applications requiring precision strain measurements.
Virtual instrumentation for measurement of strain using thin film strain gaug...
This document describes the development of a virtual instrumentation system for measuring strain using thin film strain gauge sensors. Thin film nickel-chromium strain gauges were deposited on a beryllium copper cantilever substrate using DC magnetron sputtering. The strain gauges were connected to a National Instruments data acquisition system using a signal conditioning unit. A LabVIEW virtual instrument was created to acquire and display the strain measurements in engineering units as weights were added to the cantilever. The indicated strain measurements matched the calculated strain values to within 0.5% error, demonstrating the effectiveness of the virtual instrumentation system for measuring micro-strain.
IRJET- Effect of Stiffened Element in Structural Behaviour of Steel Built...
This document presents the results of an experimental study on the effect of different stiffening patterns on the structural behavior of steel built-up beams. Three beam models were tested: an unstiffened beam, a beam with longitudinal stiffeners, and a beam with an N-truss pattern stiffener. Testing results showed that the beam with the N-truss stiffener had the highest load carrying capacity at 42.2% more than the unstiffened beam and 23.04% more than the longitudinally stiffened beam. Deflections were also lowest for the N-truss beam. While more costly, the N-truss pattern provides significantly higher strength, making it preferable for applications requiring high load capacity.
PRESENTATION ESA.pptx
This document provides an introduction to using lasers in non-destructive testing (NDT). It discusses three main laser testing methods: holography, shearography, and profilometry. Holography uses high-frequency vibration to identify irregular structures or disbonds. Shearography utilizes interferometry to identify out-of-plane deformation from subsurface flaws. Laser profilometry is preferred for cylindrical products like pipelines to assess corrosion. The document also covers ultrasonic flaw detection, describing how high-frequency sound waves can detect subsurface discontinuities using transmission and pulse-echo methods. Ultrasonic testing is widely used due to its safety, penetration, and ability to inspect thick sections.
IRJET- Auto Earth System for HV Test Set Up for Transformer in Applicatio...
1) The document describes an automatic earthing system developed for high voltage test setups to improve safety.
2) Previously, earthing during HV tests was done manually, which posed risks to operators from electric shocks if residual charges remained.
3) The automatic system uses a motorized earthing rod that is mechanically coupled to a motor and control circuit. This allows the rod to automatically discharge any residual charges after a test, eliminating the need for manual intervention.
More Related Content
What's hot
Welding automation ppt
Arcraft provides automated welding systems to improve welding quality and productivity while reducing costs. Their equipment includes welding oscillators, positioners, guns, columns, booms, cross slides, lathes, turntables, wire feeders, seam trackers, and tank rotators. These systems automate welding to enhance the working environment. Features include precision mechanisms, enclosure, controllability, stroke control, and duplication elimination. The document provides details on various automation equipment and their advantages in improving welding processes.
Alignment Systems July 2009 En
The document discusses PRÜFTECHNIK's history and products for shaft alignment and industrial measurement. It began with laser-optical shaft alignment and now offers a range of products for alignment of horizontal and vertical machinery using various measurement methods. These products are used across many industries, and PRÜFTECHNIK also provides worldwide service for complex alignment applications and geometric measurements.
Strain rosette
A strain rosette is an arrangement of three strain gauges placed in arbitrary directions on a surface to measure normal strain. Single strain gauges can only measure strain in one direction, while a rosette allows measurement in multiple directions for a more precise evaluation. There are three main types of rosettes: tee, rectangular, and delta. Strain rosettes are commonly used to monitor stress on bridges, buildings, and rails by measuring and comparing real strains to analytical models.
Kaizen
The document describes improvements made to a welding fixture for a shaft assembly process. Previously, the fixture used a limit switch to check that locating pins were inserted correctly into the shaft before allowing welding. This sometimes led to incorrect welding angles. To address this, the fixture was improved to automate angle checking using a limit switch on a lever, which only allows welding when both pins are inserted at the right angle. This countermeasure ensured welding only occurs at the proper angle specified in drawings.
Robotic welding
This deals about the types of welding robots that are using in the industries which increase the productivity rate and reduce manual operations.
MANUFACTURING TECHNOLOGY-II - UNIT-2- Over View
The document provides an overview of turning machines and lathe operations. It discusses different types of lathes like speed lathes, engine lathes, and capstan lathes. It describes the main parts of a lathe like the headstock, bed, carriage, and tailstock. It also covers lathe operations, cutting tools, chucks, and holding workpieces.
What's hot (6)
Similar to Shearing fixture
Knob Testing Fixture
This document presents a fixture designed for flexivity testing of plastic knobs used in MCCBs. It summarizes the need for a permanent fixture, issues with temporary arrangements, and the working principle and design of the new fixture. The fixture allows knobs to be securely located and bent vertically to accurately measure load versus displacement. This permanent, multi-purpose fixture saves time over temporary arrangements and provides consistent flexivity testing of MCCB knobs.
IRJET- Development of Strain Measuring Instrument for Health Monitoring of St...
This document describes the development of a strain measuring instrument to monitor the health of structural members like RCC columns and beams. A mechanical strain gauge was developed consisting of gauge points and connecting rods welded to reinforcement bars, along with a dial indicator. Laboratory tests were conducted on steel specimens up to 150kN load to generate a calibration curve. Strain gauges were then fixed to columns and beams during construction. Readings from the structural members indicated strains up to 0.0003, within the elastic limit, confirming the structure's strength and safety. The instrument allows continuous health monitoring of structures throughout their lifespan.
Visual inspection on weldments By Kingston R
Visual examination is the most commonly used non-destructive testing method for inspecting welds. It involves directly or indirectly observing the exposed surfaces of welds and base metals. Proper lighting of at least 1000 Lux is needed. Various aids like mirrors, telescopes and cameras can be used. Key factors in visual inspection are the condition of the inspector's eyes, their understanding of the inspection situation, and being objective. The document discusses visual inspection guidelines and acceptance standards from codes like ASME and AWS, as well as common weld defects.
FEA Based Validation of Weld Joint Used In Chassis of Light Commercial Vehicl...
Generally automotive systems are subjected to dynam ic and static loads,due to hives driving and adverse conditions of the road surface,thus it causes cracks,noise,vibration and failure in an automobile,since in general the total effect of work for automobile system is lowered. Such effect is arising due to behaviour in types of loading,construction and condition of the work where the automobile system is and reducing it s strength. Therefore however most of the Light Commercial Vehicles (LCV) chassis are man ufactured by welding to reduce the weight of the chassis. Hence there is a more stress concentration occurs at a welded joint region. The fundamental task is to develop a model of welded joint to sustain various loads of LCV chassis. Effect of different design parameters,properties of material are observed with respect to the strength of the weld and location of stress concentrations are identified. During the design process model parameters are often alter ed to evaluate alternative welding joining choices,to reduce weight of the system to sustain varying loading conditions without failure.
Experimental evaluation of strain in concrete elements
The document describes experimental evaluation of strain in concrete elements. It discusses different methods of strain measurement including mechanical and electrical techniques. The mechanical method uses a mechanical strain gauge to measure displacement amplified through a linkage. The electrical method uses strain gauges connected to a Wheatstone bridge circuit to measure resistance changes due to deformation. An experiment was conducted to measure strain in concrete cubes and beams using both methods. The results show the recorded strains at different stress levels applied to the specimens.
Production skill,
The document provides information on various aspects of spot welding including:
- Definitions of key terms like spot weld, welding control, and the importance of force between electrodes.
- Explanations of spot welding principles involving resistance heating when current passes through interfaces of stacked metals joined by electrodes applying pressure.
- Advantages of spot welding as the quickest and most economical method for joining metals requiring no filler medium.
- Details on TPM system pillars like autonomous maintenance, planned maintenance, quality maintenance, and focused improvement to maintain production quality and equipment lifespan.
IRJET- Cantilever Beam Crack Detection using FEA and FFT Analyser
This document presents a method to detect cracks in cantilever beams using finite element analysis and natural frequency measurements. A cracked beam is modeled as two segments connected by a spring. Natural frequencies are obtained through FEA for uncracked and cracked beams. Equations relate the stiffness of the spring and crack location to changes in natural frequency. Plots of stiffness versus crack location from three modes intersect at the actual location. The method accurately predicts crack size and position to within 4% error. A case study applies the method to a cantilever beam, generating mode shapes through FEA and using equations to determine crack parameters from frequency data.
IRJET- Behavior of Beam Column Joint in RCC Frames Subjected to Lateral Loading
This document summarizes a research paper that analyzes the behavior of beam-column joints in reinforced concrete frames subjected to lateral loading using SAP2000 software. The paper models and analyzes 3, 10, 20, and 30-story reinforced concrete frames to compare the displacement, stress, shear force, and moment results when the beam-column joint is modeled as either fully rigid, fully ductile, or semi-rigid. Tables of results are presented comparing values at different story levels for the different joint rigidity assumptions. The objective is to determine an optimum joint rigidity that avoids fully rigid or fully ductile behavior.
Detection of Static Air-Gap Eccentricity in Three Phase induction Motor by Us...
This paper presents the effect of the static air-gap eccentricity on the performance of a three phase induction motor .The Artificial Neural Network (ANN) approach has been used to detect this fault .This technique depends upon the amplitude of the positive and negative harmonics of the frequency. Two motors of (2.2 Kw) have been used to achieve the actual fault and desirable data at no-load, half-load and full-load conditions. Motor Current Signature analysis (MCSA) based on stator current has been used to detect eccentricity fault. Feed forward neural network and error back propagation training algorithms are used to perform the motor fault detection. The inputs of artificial neural network are the amplitudes of the positive and negative harmonics and the speed, and the output is the type of fault. The training of neural network is achieved by data through the experiments test on healthy and faulty motor and the diagnostic system can discriminate between “healthy” and “faulty” machine.
Importance of ndt
Testing comprise all the techniques of materials or products under different types of loadings. This way, the reliability of product to end user is assured and the process of material selection is done with a lot of ease.
Testing can be classified in two main categories depending upon destruction of products as
Destructive Testing
Non-Destructive Testing
These comprises all those techniques which are highly regulated on some standard in which specimen is broken/destructed.
Major destructive testing used these days are
Tensile Testing
Impact Testing
Burst Testing
Fatigue Testing
Creep Testing
Non-destructive testing (NDT) is a wide group of analysis techniques used in science and industry to evaluate the properties of a material, component or system without causing damage.
Another terms for NDT is NDE
Highly valuable technique that can save both money and time in product evaluation.
Accident prevention and to reduce costs
To improve product reliability
To determine acceptance to a given requirement
To quick information on repair criteria.
Visual Inspection
Acoustic Emission
Eddy Current
Liquid Penetrant
X-Ray/ Radiography
Magnetic method
Visual and optical inspection (or testing) is still a basic method for many applications. Visual inspection involves using an inspector's eyes to look for defects. The inspector may also use special tools such as magnifying glasses, mirrors, or bore scopes to gain access and more closely inspect the subject area. Visual examiners follow procedures that range from simple to very complex.
Detection and analysis of AE signals can supply valuable information regarding the origin and importance of a discontinuity in a material.
It has many industrial applications
Assessing structural integrity (Welding)
Detecting flaws
Testing for leaks (Pressure Vessel)
Monitoring weld quality
Research tool.
In a standard eddy current testing a circular coil carrying current is which generates eddy current then the presence of any flaws, will cause a change in eddy current and a corresponding change in the phase and amplitude of the measured current.
Applications:
Surface Breaking Cracks
SBC using Sliding Probes
Tube Inspection Conductivity
Heat Treat Verification
In it the defects/cracks are studied using a penetrant/dye. low surface tension fluid penetrates into clean and dry surface-breaking discontinuities. Penetrant may be applied to the test component by dipping, spraying, or brushing. After adequate penetration time has been allowed, the excess penetrant is removed and a developer is applied. The developer helps to draw penetrant out of the flaw so that an invisible indication becomes visible to the inspector. Inspection is performed under ultraviolet or white light
X-rays are just like any other kind of electromagnetic radiation. They can be produced in parcels of energy called photons, just like light.
These are used to produce image
Virtual instrumentation for measurement of strain using thin film strain gaug...
This document summarizes the development of a virtual instrumentation system for measuring strain using thin film strain gauge sensors. Thin film strain gauges were deposited on a cantilever beam using sputtering deposition. A LabVIEW program was developed to acquire and plot the resistance changes in the strain gauges under different loads. The system uses National Instruments hardware including a data acquisition board and signal conditioning modules to measure microstrains with errors within 0.5%. Thin film strain gauges offer improved performance over conventional foil gauges and this system can be applied to applications requiring precision strain measurements.
Virtual instrumentation for measurement of strain using thin film strain gaug...
This document describes the development of a virtual instrumentation system for measuring strain using thin film strain gauge sensors. Thin film nickel-chromium strain gauges were deposited on a beryllium copper cantilever substrate using DC magnetron sputtering. The strain gauges were connected to a National Instruments data acquisition system using a signal conditioning unit. A LabVIEW virtual instrument was created to acquire and display the strain measurements in engineering units as weights were added to the cantilever. The indicated strain measurements matched the calculated strain values to within 0.5% error, demonstrating the effectiveness of the virtual instrumentation system for measuring micro-strain.
IRJET- Effect of Stiffened Element in Structural Behaviour of Steel Built...
This document presents the results of an experimental study on the effect of different stiffening patterns on the structural behavior of steel built-up beams. Three beam models were tested: an unstiffened beam, a beam with longitudinal stiffeners, and a beam with an N-truss pattern stiffener. Testing results showed that the beam with the N-truss stiffener had the highest load carrying capacity at 42.2% more than the unstiffened beam and 23.04% more than the longitudinally stiffened beam. Deflections were also lowest for the N-truss beam. While more costly, the N-truss pattern provides significantly higher strength, making it preferable for applications requiring high load capacity.
PRESENTATION ESA.pptx
This document provides an introduction to using lasers in non-destructive testing (NDT). It discusses three main laser testing methods: holography, shearography, and profilometry. Holography uses high-frequency vibration to identify irregular structures or disbonds. Shearography utilizes interferometry to identify out-of-plane deformation from subsurface flaws. Laser profilometry is preferred for cylindrical products like pipelines to assess corrosion. The document also covers ultrasonic flaw detection, describing how high-frequency sound waves can detect subsurface discontinuities using transmission and pulse-echo methods. Ultrasonic testing is widely used due to its safety, penetration, and ability to inspect thick sections.
IRJET- Auto Earth System for HV Test Set Up for Transformer in Applicatio...
1) The document describes an automatic earthing system developed for high voltage test setups to improve safety.
2) Previously, earthing during HV tests was done manually, which posed risks to operators from electric shocks if residual charges remained.
3) The automatic system uses a motorized earthing rod that is mechanically coupled to a motor and control circuit. This allows the rod to automatically discharge any residual charges after a test, eliminating the need for manual intervention.
Module 10
This document provides information on various non-destructive testing (NDT) methods including visual inspection, penetrant testing, magnetic particle testing, radiographic testing, ultrasonic testing, and eddy current testing. It describes the basic principles, equipment, procedures, advantages, and limitations of each method. Visual inspection is used to find surface irregularities and must be done at all stages of fabrication. Penetrant testing uses dye penetrant to reveal surface-breaking flaws in non-porous materials. Magnetic particle testing uses magnetic fields and particles to detect surface flaws in ferromagnetic metals. Radiographic testing uses X-rays or gamma rays to image internal flaws by transmitting through the test object. Ultrasonic testing uses high
Strain Gauges
This ppt includes different types of strain gauges which are used for pressure, temperature, force, acceleration etc measurement.
All types of strain gauges are included. Also temperature compensation is also explained.
materials-15-05093.pdf
This document discusses improving remote field eddy current (RFEC) testing technology to detect crack-like defects in aircraft long truss structures. Finite element modeling is used to optimize an RFEC probe by enhancing the indirect magnetic field through adding a magnetic circuit, and suppressing the direct field through composite shielding. Simulations show the improved probe reduces size while improving detection sensitivity. Experiments then validate the probe can detect crack defects in aircraft long truss components.
IRJET - Analysis of Rivet Joint for Application of Substation
This document analyzes rivet joints for application in substations. It discusses performing tensile tests on different materials (brass, aluminum, mild steel, stainless steel) using a UTM machine. A 3D model was created in Creo and meshed in HyperMesh. LS-DYNA was used to simulate the model and find von Mises stresses for different rivet diameters. The optimal diameter and material were selected based on stresses remaining within permissible limits. Analysis found mild steel EN 14 and a 6.05mm diameter to be best suited for this application.
Similar to Shearing fixture (20)
IRJET- Development of Strain Measuring Instrument for Health Monitoring of St...
IRJET- Development of Strain Measuring Instrument for Health Monitoring of St...
FEA Based Validation of Weld Joint Used In Chassis of Light Commercial Vehicl...
FEA Based Validation of Weld Joint Used In Chassis of Light Commercial Vehicl...
Experimental evaluation of strain in concrete elements
Experimental evaluation of strain in concrete elements
IRJET- Cantilever Beam Crack Detection using FEA and FFT Analyser
IRJET- Cantilever Beam Crack Detection using FEA and FFT Analyser
IRJET- Behavior of Beam Column Joint in RCC Frames Subjected to Lateral Loading
IRJET- Behavior of Beam Column Joint in RCC Frames Subjected to Lateral Loading
Detection of Static Air-Gap Eccentricity in Three Phase induction Motor by Us...
Detection of Static Air-Gap Eccentricity in Three Phase induction Motor by Us...
Virtual instrumentation for measurement of strain using thin film strain gaug...
Virtual instrumentation for measurement of strain using thin film strain gaug...
Virtual instrumentation for measurement of strain using thin film strain gaug...
Virtual instrumentation for measurement of strain using thin film strain gaug...
IRJET- Effect of Stiffened Element in Structural Behaviour of Steel Built...
IRJET- Effect of Stiffened Element in Structural Behaviour of Steel Built...
IRJET- Auto Earth System for HV Test Set Up for Transformer in Applicatio...
IRJET- Auto Earth System for HV Test Set Up for Transformer in Applicatio...
IRJET - Analysis of Rivet Joint for Application of Substation
IRJET - Analysis of Rivet Joint for Application of Substation
Recently uploaded
一比一原版美国哥伦比亚大学毕业证Columbia成绩单一模一样
原件一模一样【微信：6496090】【美国哥伦比亚大学毕业证Columbia学位证成绩单】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理美国哥伦比亚大学毕业证Columbia学位证【微信：6496090 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理美国哥伦比亚大学毕业证Columbia学位证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理美国哥伦比亚大学毕业证Columbia学位证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理美国哥伦比亚大学毕业证Columbia学位证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Practical eLearning Makeovers for Everyone
Welcome to Practical eLearning Makeovers for Everyone. In this presentation, we’ll take a look at a bunch of easy-to-use visual design tips and tricks. And we’ll do this by using them to spruce up some eLearning screens that are in dire need of a new look.
一比一原版(UWE毕业证书)西英格兰大学毕业证如何办理
原件一模一样【微信：WP101A】【(UWE毕业证书)西英格兰大学毕业证学位证成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理(UWE毕业证书)西英格兰大学毕业证学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(UWE毕业证书)西英格兰大学毕业证学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(UWE毕业证书)西英格兰大学毕业证学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(UWE毕业证书)西英格兰大学毕业证学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版肯特大学毕业证UKC成绩单一模一样
原件一模一样【微信：6496090】【肯特大学毕业证UKC学位证成绩单】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理肯特大学毕业证UKC学位证【微信：6496090 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理肯特大学毕业证UKC学位证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理肯特大学毕业证UKC学位证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理肯特大学毕业证UKC学位证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版美国旧金山大学毕业证（USF学位证）如何办理
原件一模一样【微信：WP101A】【美国旧金山大学毕业证（USF学位证）成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理美国旧金山大学毕业证（USF学位证）学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理美国旧金山大学毕业证（USF学位证）学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理美国旧金山大学毕业证（USF学位证）学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理美国旧金山大学毕业证（USF学位证）学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版(Deakin毕业证书)澳洲迪肯大学毕业证文凭如何办理
原件一模一样【微信：WP101A】【(Deakin毕业证书)迪肯大学毕业证学位证成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理(Deakin毕业证书)迪肯大学毕业证学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(Deakin毕业证书)迪肯大学毕业证学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(Deakin毕业证书)迪肯大学毕业证学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(Deakin毕业证书)迪肯大学毕业证学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版布兰登大学毕业证(BU毕业证书)如何办理
学校原件一模一样【微信：6496090】【布兰登大学毕业证(BU毕业证书)成绩单学位证】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理布兰登大学毕业证(BU毕业证书)【微信：6496090 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理布兰登大学毕业证(BU毕业证书)【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理布兰登大学毕业证(BU毕业证书)【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理布兰登大学毕业证(BU毕业证书)【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版(LSBU毕业证书)伦敦南岸大学毕业证如何办理
学校原件一模一样【微信：6496090 】【(LSBU毕业证书)伦敦南岸大学毕业证成绩单】【微信：6496090 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微6496090
【主营项目】
一.毕业证【q微6496090】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微6496090】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(LSBU毕业证书)伦敦南岸大学毕业证【微信：6496090 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(LSBU毕业证书)伦敦南岸大学毕业证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(LSBU毕业证书)伦敦南岸大学毕业证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(LSBU毕业证书)伦敦南岸大学毕业证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
原版制作(MDIS毕业证书)新加坡管理发展学院毕业证学位证一模一样
学校原件一模一样【微信：741003700 】《(MDIS毕业证书)新加坡管理发展学院毕业证学位证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版（KPU毕业证）加拿大昆特兰理工大学毕业证如何办理
原件一模一样【微信：WP101A】【（KPU毕业证）加拿大昆特兰理工大学毕业证学位证成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理（KPU毕业证）加拿大昆特兰理工大学毕业证学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理（KPU毕业证）加拿大昆特兰理工大学毕业证学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理（KPU毕业证）加拿大昆特兰理工大学毕业证学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理（KPU毕业证）加拿大昆特兰理工大学毕业证学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
欧洲杯买球-欧洲杯买球买球网好的网站-欧洲杯买球哪里有正规的买球网站|【网址🎉ac123.net🎉】
【网址🎉ac123.net🎉】欧洲杯买球是独立的博彩公司。该公司最初专门从事在线体育博彩，现在合并了在线娱乐场。该公司最初成立时以其前董事长Victor Chandler的名字命名，之后更名为欧洲杯买球。欧洲杯买球现由商人和赛马主，迈克尔·塔博尔拥有，运营总部设在直布罗陀。平台拥有体育博彩（沙巴）、真人娱乐场、电子游戏、金融投注等游戏项目，支持手机投注，优惠活动很丰富。
一比一原版（Coventry毕业证）英国考文垂大学毕业证如何办理
原件一模一样【微信：WP101A】【（Coventry毕业证）英国考文垂大学毕业证学位证成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理（Coventry毕业证）英国考文垂大学毕业证学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理（Coventry毕业证）英国考文垂大学毕业证学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理（Coventry毕业证）英国考文垂大学毕业证学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理（Coventry毕业证）英国考文垂大学毕业证学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版（爱大毕业证）美国爱荷华大学毕业证如何办理
原件一模一样【微信：WP101A】【（爱大毕业证）美国爱荷华大学毕业证学位证成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理（爱大毕业证）美国爱荷华大学毕业证学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理（爱大毕业证）美国爱荷华大学毕业证学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理（爱大毕业证）美国爱荷华大学毕业证学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理（爱大毕业证）美国爱荷华大学毕业证学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版（Brunel毕业证）英国布鲁内尔大学毕业证如何办理
原件一模一样【微信：WP101A】【（Brunel毕业证）英国布鲁内尔大学毕业证学位证成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理（Brunel毕业证）英国布鲁内尔大学毕业证学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理（Brunel毕业证）英国布鲁内尔大学毕业证学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理（Brunel毕业证）英国布鲁内尔大学毕业证学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理（Brunel毕业证）英国布鲁内尔大学毕业证学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版（CSUEB毕业证）美国加州州立大学东湾分校毕业证如何办理
原件一模一样【微信：WP101A】【（CSUEB毕业证）美国加州州立大学东湾分校毕业证学位证成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理（CSUEB毕业证）美国加州州立大学东湾分校毕业证学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理（CSUEB毕业证）美国加州州立大学东湾分校毕业证学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理（CSUEB毕业证）美国加州州立大学东湾分校毕业证学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理（CSUEB毕业证）美国加州州立大学东湾分校毕业证学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版(NU毕业证书)诺森比亚大学毕业证如何办理
原件一模一样【微信：WP101A】【(NU毕业证书)诺森比亚大学毕业证学位证成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理(NU毕业证书)诺森比亚大学毕业证学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(NU毕业证书)诺森比亚大学毕业证学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(NU毕业证书)诺森比亚大学毕业证学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(NU毕业证书)诺森比亚大学毕业证学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版澳洲查理斯特大学毕业证（CSU学位证）如何办理
原件一模一样【微信：WP101A】【澳洲查理斯特大学毕业证（CSU学位证）成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理澳洲查理斯特大学毕业证（CSU学位证）学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理澳洲查理斯特大学毕业证（CSU学位证）学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理澳洲查理斯特大学毕业证（CSU学位证）学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理澳洲查理斯特大学毕业证（CSU学位证）学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版（ECU毕业证）澳洲埃迪斯科文大学毕业证如何办理
原件一模一样【微信：WP101A】【（ECU毕业证）澳洲埃迪斯科文大学毕业证学位证成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理（ECU毕业证）澳洲埃迪斯科文大学毕业证学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理（ECU毕业证）澳洲埃迪斯科文大学毕业证学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理（ECU毕业证）澳洲埃迪斯科文大学毕业证学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理（ECU毕业证）澳洲埃迪斯科文大学毕业证学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Recently uploaded (20)
欧洲杯买球-欧洲杯买球买球网好的网站-欧洲杯买球哪里有正规的买球网站|【网址🎉ac123.net🎉】
欧洲杯买球-欧洲杯买球买球网好的网站-欧洲杯买球哪里有正规的买球网站|【网址🎉ac123.net🎉】
Shearing fixture
- 1. Presented By:- VASUDEVANAND VINAYAK NANCHE V.J.T.I. Mumbai / J.N.V. Sindhudurg Guided By:- Mr. MoKhan L&T Powai
- 2. M/S LARSEN & TOUBRO, POWAI - 400072 Electrical & Electronics Business Group (EBG) Dept : Switchgear Quality Control & Reliability (SQR)
- 3. Brazing- Brazing is a metal-joining process in which two pieces of metal are joined with a third molten filler metal, which distributed between two close-fitting parts by capillary action. Brazed joints are stronger than the two metals being bonded together.
- 4. C-Scan Ultrasonic Non-destructive Testing- Some flaws such as inclusion, incomplete penetration, porosity, etc. may occur during brazing. This setup was originally developed to detect / locate these kinds of flaws. C-scan is a two dimensional graphical presentation, in which the discontinuity echoes are displayed in a top view, on the test surface. C-scan image of the bonding interface can be obtained, from which the system can auto measure & evaluate bonding rate (in %) of a bonded interface.
- 5. C-Scan Ultrasonic Non-destructive Testing- Principles of pulse-echo techniques- When the ultrasonic sound transmitted in an object, echoes will come back from discontinuities, flaws or boundaries in the object, which will be amplified & displayed on a cathode-ray oscilloscope, showing their amplitude & flight time in the form of C-Scan image.
- 6. Principles of pulse-echo techniques Cathode-ray oscilloscope water Probe T S B F Component T-transmitted wave S-Surface echo F-Flaw echo B-Bottom echo
- 7. Schematic diagram of the equipment in C-scan system
- 8. Setup for C-Scan Ultrasonic Non-destructive Testing
- 9. Confirmation of the test result: Milling test has been carried out & milled surface has been compared to the C-Scan image obtained before milling of the contact assembly. Additional mechanical testing like shear strength test, torque test & pull test etc. Compare mechanical testing results with previously measured bonding % of brazed joints. Hence we can make our report strong enough to ensure brazing quality.
- 10. Project Shearing Fixture for brazed Joints By – Vasudevanand Nanche SQR-QA
- 12. What is shear?
- 13. Working principle of the Fixture.
- 15. Development / Audit
- 16. Advantage over Chisel Test
- 18. Shear always occurs between the points in the least resisting region, where forces are applied in opposite direction.
- 20. Shearing fixture for Brazed joints. Polarity Testing Setup
- 22. Flexibility / Multi purpose.
- 23. Safe & easy to use.
- 24. Design to have long life.
- 25. Can be used for Trouble shooting analysis.