Shawn Mayton is an experienced drilling operator seeking a permanent position on an offshore or onshore rig. He has over 10 years of experience in various roles including derrickman, floorman, and special services operator. He holds current certifications including IADC Supervisor's Well Control and HUET. His experience includes work on semi-submersibles, drillships, jackups, and land rigs in locations like Australia, North Africa, and the Middle East. Personal details include being Australian, single, and available for immediate mobilization.
This intensive five-day course is designed to provide participants with a thorough knowledge of downhole sand exclusion equipment and the operational procedures required for converting a drilled well into an efficient and safe producer. It follows a practical approach for the various types of sand control equipment, specific applications, the preparation and the final execution and installation of the equipment.
This intensive five-day course is designed to provide participants with a thorough knowledge of downhole sand exclusion equipment and the operational procedures required for converting a drilled well into an efficient and safe producer. It follows a practical approach for the various types of sand control equipment, specific applications, the preparation and the final execution and installation of the equipment.
PetroSync - Sand Control Completion PracticesPetroSync
One of the objectives of well completion is to maximize productivity with reliable equipment. These objectives are difficult to attain in unconsolidated sand formations due to sand production as a result of stress concentration
Course Description
The business of fuelling the world through hydrocarbon production must be carried out with optimum profitability. Participants will learn how sand production and inadvertent formation damage can erode these profits. Methods and procedures will be presented to guide the participants in decision making with regard to completing a well with optimum control of formation sand while incurring minimal damage to the well or production zone. Extensive theory will be presented illustrating why certain practices should either be employed or strictly avoided. The very latest in the use of forecasting methods, tools, techniques, and personal experiences will be presented.
By attending the 5 day training course, you will be able to:
Assess how rock will fail and how this analysis is used to determine the appropriate sand control method.
Interpret particle size distribution data.
Determine the appropriate sand control method when provided with appropriate reservoir and production data.
Select completion equipment and associated tooling for sand control (screens, gravels, work strings, barrier valves etc.)
Produce an outline installation procedure for the main types of sand control.
Troubleshoot sand control problems.
PetroSync - Sand Control Completion PracticesPetroSync
One of the objectives of well completion is to maximize productivity with reliable equipment. These objectives are difficult to attain in unconsolidated sand formations due to sand production as a result of stress concentration
Course Description
The business of fuelling the world through hydrocarbon production must be carried out with optimum profitability. Participants will learn how sand production and inadvertent formation damage can erode these profits. Methods and procedures will be presented to guide the participants in decision making with regard to completing a well with optimum control of formation sand while incurring minimal damage to the well or production zone. Extensive theory will be presented illustrating why certain practices should either be employed or strictly avoided. The very latest in the use of forecasting methods, tools, techniques, and personal experiences will be presented.
By attending the 5 day training course, you will be able to:
Assess how rock will fail and how this analysis is used to determine the appropriate sand control method.
Interpret particle size distribution data.
Determine the appropriate sand control method when provided with appropriate reservoir and production data.
Select completion equipment and associated tooling for sand control (screens, gravels, work strings, barrier valves etc.)
Produce an outline installation procedure for the main types of sand control.
Troubleshoot sand control problems.
1. RESUME
Shawn Mayton
Contact Details:
EMail:shawnrigpig77@live.com
Phone : +61 499 253 087
Address : 9 Penny St. Ridgehaven S.A 5097
Goal :
To gain a permenant position on an offshore/onshore drilling rig. I have a
strong desire to continue to build on my drilling/well control knowledge. I
have over ten years experience on various drilling units, starting my career
on land based Kelly/SCR rigs, thru to recently holding a Derrickman position
on a Conventional Semi Submersible, Also have experience on 6th
generation
Deep Water Semi Submersibles, Drillships and Jack Up type installations. I
hold a current IADC approved Supervisors level Well Control ticket,
including Workover, Drilling, Surface and Sub Sea Stack Qualifications.
Current HUET. Extremely safety conscious, actively participating in all
relevant STOP/Permit to Work Safety Systems. Currently residing in
Adelaide, South Australia, I hold a valid Australian Passport, and I am
available to mobilize immediately.
Personal Details : Gender : Male, Date of birth : 12th
of January 1977
Nationality : Australian, Mariatal Status : Single
Employment History●
Wild Well Control, Inc. 10-6-2013 - 28-1-2014 Special Services
Operator Nth Africa – Middle East. Duties : Hot Tapping into unknown
pressurized pipes and vessels, Valve, Drilling out of unoperationable
pressurized gate and ball valves, Freeze Jobs on valves, conductors
and well heads/Christmas Trees.
2. Total Marine Services 5-10-2012 - 26-10-2012
Floorman on Stena Clyde, Australia
Rig Type : Semi Submersible, 3000 hp, Conventional Drilling,
Maritime Hydraulics Top Drive, Manual Derrick,
Cameron 18 ¾ 1500 psi WP BOP, 3 National 12p Mud Pumps
Duties : Pressure testing of all drilling Equipment, BOPs, Measure and
logging of all BHA and drill string, assisting Driller in day to day
operations, Directing Derrickman/Pumpman and drill crew, before,
during and post of all operations, Organising and Executing all permits
to work systems, experienced member of drill crew.
● Offshore Marine Services 21-6-2012 - 25-9-2012
Derrickman on Noble Clyde Boudereaux, Australia
Rig Type : Semi Submersible, 5th
Generation, Cyber Based
NOV 15000 psi Schaffer BOP, 3500 hp National Drawworks,
Maritime Hydraulics Top Drive, Emsco 2200 hp Triplex Mud Pumps.
Duties : Maintaining and Mixing of all Drilling fluids, Maintainence of
Mud Pumps, and all pipe work and Valves from pump room to drill floor.
Working closely with Mud Engineer to better understand the
Different working properties of various water and oil based
drilling fluids.
Global Resources 14-4-2012 - 18-5-2012
Floorman on Deep Water Frontier, Australia
Rig Type : Drill Ship, 6th
Generation, Cyber Based, 6600 hp Active
Heave Draw Works, Varco Top Drive, 2 X Cameron 18 ¾ 15k BOP
Duties : Operation of Automated Drill Floor Equipment, Assisting of
Derrickman/Pumpman, Day to Day Roughneck duties…
Total Marine Services 4-7-2010 - 24-3-2012
Floorman on Stena Clyde, Australia
Ferro Con, MWS Group 5-1-2010 - 22-6-2010
Structural Steel Erection Supervisor
3. Total Marine Services 12-2-2008 - 12-12-2009
Assistant Derrickman on West Atlas, West Triton. Sea Drill
Rig Type : Both Jack Up, 5th
generation Cyber based, NOV Draw
Works, Maritime Hydralics Top Drive, Cameron 15k BOPs, NOV Mud
Pumps. Duties, Assisting Derrickman and drill crew with all day to day
operations.
Ferro Con MWS Group 5-12-2005 - 7-2-2008
Structural Steel Rigger, Adelaide, S.A.
Oil Drilling & Exploration 20-3-2002 - 5-10-2004
Onshore Floorman, Rigs 30,32,16 Australian Desert
Rig Types : Conventional Kelly Drive SCR Rigs, with closed loop drilling
fluid system.
Skills/Qualifications
Supervisors level Well Control, Drilling, Work Over and Sub Sea Stack
40 Hour Specialist Safety Training, HAZWOPPER 3 Day OSHA Core,
Current Cold Water HUET, IADC Rig Pass including SafeGulf and
SafeLand H2S Awareness including Respirator Fit Test
United Arab Emirates Drivers Licence
Dogman, Bridge and gantry Crane, Riggers, Forklift, EWP,
Safe Work At Heights, Working in Confined Spaces,
Rescue From Heights, Confined Space Rescue, First Aid
First Response to Emergencies, Offshore Firefighting
4. Referee's
Pat O’Shaughnessy. Oman Agent for Wild Well Control & CEO of ND&S
Oman. Email. pat@uger.net
Richard Usher. Special Services Operator, Wild Well Control, Houston
Texas. Ph +1 713 553 4329
Adam Brown. Driller, Sea Drill. Ph. +61 405 911 650
Shaun Astles. Driller, Stena Drilling. Ph. +61 404 274 440