Seaward - Electrical Testing & Voltage Detection, High Voltage Safety, HV Indicators, High Voltage Phasing Units, Halo Hook Ammeter, Type L Plus, AGL-5, Proving Units, PAT Tseters, Installation Systems
The PrimeTest 350 is an advanced portable appliance tester (PAT) designed for professionals. It features a lightweight, handheld design with rechargeable batteries and wireless Bluetooth connectivity. The PrimeTest 350 can perform a wide range of electrical safety tests and store results internally or transfer them wirelessly to external printers, scanners, and PAT testing software for record keeping. It is part of Seaward's PATSolutions package which provides a complete portable appliance testing system including the tester, accessories, software, and support.
Thorne & Derrick UK are official distributors of the SebaKMT range of LV-HV Cable Fault Location instruments including cable sheath testers and cable sheath fault prelocation and pinpointing units. SebaKMT are the leading manufacturer of measurement equipment for the diagnosis of cable networks and for cable fault location. Cable faults are the ''natural enemy'' of reliability. The innovative SebaKMT products make it possible to quickly localise low and high voltage cable faults without causing damage to fault-free parts of the cable.
Cable fault location has often been seen as a dark art, as the causes of faults are different and varied. Successfully locating faults locations depends on an experienced operator. The challenge to Megger’s engineering team was to remove the mysteries from fault locating, and to make the whole process more logical. This methodical approach was used to define a feature set that would satisfy fault location needs in the varied conditions where the tester would be used around the world.
Megger cable fault location solutions include : low voltage TDR underground cable fault locators, surge generator fault locators, cable fault pinpointing, high voltage DC test sets and high voltage (11kV-33kV-66kV-132kV) underground cable fault locators.
Surge generator cable fault locators ("thumpers") provide pre-location and pinpoint cable fault location. Cable fault prelocation using ICE (Impulse Current Method) is preferred for extensive underground cable fault location and pinpointing cable faults in water damaged cable joints. Precise location of cable faults through surge generator fault locators (cable thumping) is very quick and limits expensive excavation by pinpoint accuracy.
Megger designs and manufactures portable electric test equipment. Megger products help install, improve efficiency, reduce cost and extend the life of electrical assets. The Megger brand is so well known these days that some maintenance professionals incorrectly use it as a verb when they refer to doing an insulation test.
Megger manufactures hand-held test equipment as well as larger insulation testers, oil test equipment and low resistance ohmmeters.
Megger DETEX Voltage Detectors are available in seven models that cover a range from distribution class to transmission line voltages up to 550kV.
Megger cable fault location solutions include : low voltage TDR underground cable fault locators, surge generator fault locators, cable fault pinpointing, high voltage DC test sets and high voltage (11kV-33kV-66kV-132kV) underground cable fault locators.
Metrohm MET7A501C Safety Insulation Tester
LV HV Electrical Testing
Electrical Safety Testing In Hazardous Areas
Martindale Electric Flash Testers & Insulation Testers
Martindale Electric Metrohm MET7A501C Safety Insulation Tester Description
Martindale Electric Metrohm MET7A501C Safety Insulation Tester was originally designed for use in hazardous areas, such as mines and petrol sites. However, due to the new ATEX regulations, the device no longer meets the requirements for intrinsically safe products - BUT this product has been in active service for 45 years in hazardous areas, in the presence of methane, ammonia and hydrocarbons.
The Metrohn MET7A501C is a one of a kind tester and fully meets the ATEX requirements, therefore the use of this tester should be decided upon by a suitably qualified and knowledgeable person. Whilst the MET7A501C safety insuation tester does not qualify for ATEX approval, safety officers should evaluate the risks of failing to perform adequate electrical safety testing.
Martindale Electric Metrohm MET7A501C Safety Insulation Tester Specifications
Insulation Range: 0 - 50MΩ
Test Voltage: 500V DC +/- 10% across 1MΩ
Short Circuit Current: <2ma><26mA
Continuity Accuracy: +/- 1.6mm of scale arc length
Complies With: BS1259
Supply: 1.5V AA IEC batteries
Housing: Shatterproof ABS case
Dimensions: 32 x 82 x 60mm
Weight: 600g approx
Operating Temperature: 0 to 40°C
Storage Temperature: -20°C to 60°C
Martindale Electric Metrohm MET7A501C Safety Insulation Tester Contents
Case, test leads (DFK0113)
Safety tool to remove battery cover
Instruction manual
SEBA KMT Teleflex T30E is a digital TDR for the fault location of low resistance cable faults and interruptions in low and high voltage power cable networks. With integrated battery power supply Teleflex T30E is ideally suited for field fault location use - can be connected to a shock discharge generator and an ARM filter for pre-location of high resistance and intermittent cable faults.
SEBA KMT Teleflex T30E - Features : One button operation, "Quick-Step" mode for rapid fault finding, Automatic far end indication and fault reconition with distance indication, Impulse current and voltage decay method, Zoom function, "Step-by-Step" easy mode for user friendly location of cable faults.
Megger designs and manufactures portable electric test equipment. Megger products help install, improve efficiency, reduce cost and extend the life of electrical assets. The Megger brand is so well known these days that some maintenance professionals incorrectly use it as a verb when they refer to doing an insulation test.
Thorne & Derrick UK are official distributors of the SebaKMT range of LV-HV Cable Fault Location instruments including cable sheath testers and cable sheath fault prelocation and pinpointing units. SebaKMT are the leading manufacturer of measurement equipment for the diagnosis of cable networks and for cable fault location. Cable faults are the ''natural enemy'' of reliability. The innovative SebaKMT products make it possible to quickly localise low and high voltage cable faults without causing damage to fault-free parts of the cable.
Cable fault location has often been seen as a dark art, as the causes of faults are different and varied. Successfully locating faults locations depends on an experienced operator. The challenge to Megger’s engineering team was to remove the mysteries from fault locating, and to make the whole process more logical. This methodical approach was used to define a feature set that would satisfy fault location needs in the varied conditions where the tester would be used around the world.
Megger cable fault location solutions include : low voltage TDR underground cable fault locators, surge generator fault locators, cable fault pinpointing, high voltage DC test sets and high voltage (11kV-33kV-66kV-132kV) underground cable fault locators.
Surge generator cable fault locators ("thumpers") provide pre-location and pinpoint cable fault location. Cable fault prelocation using ICE (Impulse Current Method) is preferred for extensive underground cable fault location and pinpointing cable faults in water damaged cable joints. Precise location of cable faults through surge generator fault locators (cable thumping) is very quick and limits expensive excavation by pinpoint accuracy.
Megger designs and manufactures portable electric test equipment. Megger products help install, improve efficiency, reduce cost and extend the life of electrical assets. The Megger brand is so well known these days that some maintenance professionals incorrectly use it as a verb when they refer to doing an insulation test.
Megger manufactures hand-held test equipment as well as larger insulation testers, oil test equipment and low resistance ohmmeters.
Megger DETEX Voltage Detectors are available in seven models that cover a range from distribution class to transmission line voltages up to 550kV.
Megger cable fault location solutions include : low voltage TDR underground cable fault locators, surge generator fault locators, cable fault pinpointing, high voltage DC test sets and high voltage (11kV-33kV-66kV-132kV) underground cable fault locators.
Metrohm MET7A501C Safety Insulation Tester
LV HV Electrical Testing
Electrical Safety Testing In Hazardous Areas
Martindale Electric Flash Testers & Insulation Testers
Martindale Electric Metrohm MET7A501C Safety Insulation Tester Description
Martindale Electric Metrohm MET7A501C Safety Insulation Tester was originally designed for use in hazardous areas, such as mines and petrol sites. However, due to the new ATEX regulations, the device no longer meets the requirements for intrinsically safe products - BUT this product has been in active service for 45 years in hazardous areas, in the presence of methane, ammonia and hydrocarbons.
The Metrohn MET7A501C is a one of a kind tester and fully meets the ATEX requirements, therefore the use of this tester should be decided upon by a suitably qualified and knowledgeable person. Whilst the MET7A501C safety insuation tester does not qualify for ATEX approval, safety officers should evaluate the risks of failing to perform adequate electrical safety testing.
Martindale Electric Metrohm MET7A501C Safety Insulation Tester Specifications
Insulation Range: 0 - 50MΩ
Test Voltage: 500V DC +/- 10% across 1MΩ
Short Circuit Current: <2ma><26mA
Continuity Accuracy: +/- 1.6mm of scale arc length
Complies With: BS1259
Supply: 1.5V AA IEC batteries
Housing: Shatterproof ABS case
Dimensions: 32 x 82 x 60mm
Weight: 600g approx
Operating Temperature: 0 to 40°C
Storage Temperature: -20°C to 60°C
Martindale Electric Metrohm MET7A501C Safety Insulation Tester Contents
Case, test leads (DFK0113)
Safety tool to remove battery cover
Instruction manual
SEBA KMT Teleflex T30E is a digital TDR for the fault location of low resistance cable faults and interruptions in low and high voltage power cable networks. With integrated battery power supply Teleflex T30E is ideally suited for field fault location use - can be connected to a shock discharge generator and an ARM filter for pre-location of high resistance and intermittent cable faults.
SEBA KMT Teleflex T30E - Features : One button operation, "Quick-Step" mode for rapid fault finding, Automatic far end indication and fault reconition with distance indication, Impulse current and voltage decay method, Zoom function, "Step-by-Step" easy mode for user friendly location of cable faults.
Megger designs and manufactures portable electric test equipment. Megger products help install, improve efficiency, reduce cost and extend the life of electrical assets. The Megger brand is so well known these days that some maintenance professionals incorrectly use it as a verb when they refer to doing an insulation test.
The portable VLF Test System 20 kV of Seba KMT can be used to test the cables in conjunction with the according local regulations for operating voltage levels up to 11 kV for new cables and 16 kV for aged cables at 3 μF cable capacity.
By using the patented Seba KMT 0.1 Hz Cosine Square Wave Voltage, weak and for further operation critical spots in PE, XLPE but also in paper cables are brought to a controlled breakdown very fast without causing additional damage or ageing to the cable insulation.
The SEBA KMT VLF Test System consists of a DC source, which charges the test object up to the required test voltage level and the commutator unit, which performs the regular 5 second interval polarity change.
SEBA KMT MFM5-1 is the universal test instrument for cable sheath testing including prelocation and pinpointing of cable sheath faults - in sheath testing mode SEBA KMT MFM5-1 can detect minute cable sheath insulation damage on low and high voltage cable networks.
SEBA KMT MFM5-1 ensures fast and precise cable sheath fault location - the instrument is menu-driven and fully automatic sheath fault prelocation is accurately achieved by inputting total cable length. SEBA KMT ESG 80-2 can be combined with the MFM5-1 for earth fault location in LV-HV cables.
Cable Sheath Test & Fault Location SEBA KMT MFM5-1 Features : Sheath testing, fault prelocation and pinpointing combined in single unit, sheath testing up to 5kV, time saving prelocation of sheath fault.
Your electrical safety specilist for all equipments Powered AC and DCMahesh Chandra Manav
We all are aware that we are applying lots of Artficial Sources to make our Life Comforts .
For This we are installing Many Electrical Equipments Power AC & DC and Electric Vehicles Inside our Building and out Side and in this process many of metal Part is entering into our Building.
To ensure better perform and Human Safety Earthing of Equipment and Conductive stucture is very important Value from 1 Ohms up to 0.25 Ohms.
Our National Building Code 2016 is alreday given Guide Line and Supporting by MBBL2019
(Manual Building By LAW).
Internal Switch and External Lightning will very Danger for our Equipments and Human Lives May Cause Assest Damage up to Sacrifice Human Live due to Fire and Electric Change.
We have to Design and protect our Building or Permises form External Lightning by Nature use NBC IS/IEC 62305.
When Lightning Fall any Condutive Like Pole ,Transmission Line and React with Ground may be Shift 100kA Fault Current into our Building use Surge Protection Device to product from any ind of Direct and Indirect Threat.
JMV LPS Ltd belive Make in India Noida Base Company Manufacturer Design ,Engineering ,Supply and Installation.
Maintenance Free Earthing ,Copper Clad Steet Sof Conductore, Exothermic Weld, External Lightning Protection and per IS/IEC62305, Surge Protection Devive as per IS/IEC 62035.
ABB low voltage surge arresters LOVOS-5 and LOVOS-10 are a new generation of LV surge arresters ensuring electrical protection of overhead lines, electric energy receivers, distributing transformers and low voltage electrical equipment. Specify and install ABB LOVOS type surge arresters to protect low voltage power equipment from the effects of lightning and switching overvoltages.
ABB low voltage surge arrester types LOVOS-5 and LOVOS-10 selection criteria : continuous operating voltage Uc, voltage protection level Up and energy absorption capability.
The ABB LOVOS range provides protection along LV overhead lines, cables, motors, switches, any equipment connected to the line, from the LV side of distribution transformers up to measuring instruments.
Typical places of installation
• low voltage switchgears, distribution transformers (LV side)
• transition points of insulated and uninsulated, overhead and underground lines and cables
• electricity service entrance locations to buildings (in cabinets or at poles)
• at junctions (branching])
• every 500 / 1000 m of overhead line in locations of high lightning activity
• at the end of dead-end feeder line
• at the sealing ends of inserted cables
• at any apparatuses connected to secondary voltage source
ABB Power Products - Low Voltage Capacitators, Low Voltage Surge Arresters, Low Voltage Surge Arresters, Low Voltage Plugs & Sockets ATEX, Medium - High Voltage Fuses (Indoor & Outdoor), Current Transformers, Voltage Transformers, Voltage Surge Arresters, Vacuum Contactors.
Device designed to test for the absence of voltage on HV systems up to 735 KV.
Its use is particularly recommended for voltages over 400 KV.
Indication of the absence of voltage and correct operation of the device by a green LED.
Self-test device.
Can be used in all weathers.
IEC 61243-1
This original configuration gives it very it very high performances, especially in the case of high RF induction and/or parasitic electric fields.
Mains frequency range : ; 50 or 60 Hz
Very sturdy polycarbonate casing.
Electronic cut-out if battery under threshold voltage of 8V.
Temperature range : from -25°C to +55°C
Power supply : one 9V alkaline battery.
Device comes in a metal case with hooks Ø 60 and 120mm and straight electrode 100mm.
IEC 61243-1 above 50kV to 780 kV
Temperature range : from -25°C to +55°C
Permanent standby, auto wake up
Sound and light indication
The portable VLF Test System 20 kV of Seba KMT can be used to test the cables in conjunction with the according local regulations for operating voltage levels up to 11 kV for new cables and 16 kV for aged cables at 3 μF cable capacity.
By using the patented Seba KMT 0.1 Hz Cosine Square Wave Voltage, weak and for further operation critical spots in PE, XLPE but also in paper cables are brought to a controlled breakdown very fast without causing additional damage or ageing to the cable insulation.
The SEBA KMT VLF Test System consists of a DC source, which charges the test object up to the required test voltage level and the commutator unit, which performs the regular 5 second interval polarity change.
SEBA KMT MFM5-1 is the universal test instrument for cable sheath testing including prelocation and pinpointing of cable sheath faults - in sheath testing mode SEBA KMT MFM5-1 can detect minute cable sheath insulation damage on low and high voltage cable networks.
SEBA KMT MFM5-1 ensures fast and precise cable sheath fault location - the instrument is menu-driven and fully automatic sheath fault prelocation is accurately achieved by inputting total cable length. SEBA KMT ESG 80-2 can be combined with the MFM5-1 for earth fault location in LV-HV cables.
Cable Sheath Test & Fault Location SEBA KMT MFM5-1 Features : Sheath testing, fault prelocation and pinpointing combined in single unit, sheath testing up to 5kV, time saving prelocation of sheath fault.
Your electrical safety specilist for all equipments Powered AC and DCMahesh Chandra Manav
We all are aware that we are applying lots of Artficial Sources to make our Life Comforts .
For This we are installing Many Electrical Equipments Power AC & DC and Electric Vehicles Inside our Building and out Side and in this process many of metal Part is entering into our Building.
To ensure better perform and Human Safety Earthing of Equipment and Conductive stucture is very important Value from 1 Ohms up to 0.25 Ohms.
Our National Building Code 2016 is alreday given Guide Line and Supporting by MBBL2019
(Manual Building By LAW).
Internal Switch and External Lightning will very Danger for our Equipments and Human Lives May Cause Assest Damage up to Sacrifice Human Live due to Fire and Electric Change.
We have to Design and protect our Building or Permises form External Lightning by Nature use NBC IS/IEC 62305.
When Lightning Fall any Condutive Like Pole ,Transmission Line and React with Ground may be Shift 100kA Fault Current into our Building use Surge Protection Device to product from any ind of Direct and Indirect Threat.
JMV LPS Ltd belive Make in India Noida Base Company Manufacturer Design ,Engineering ,Supply and Installation.
Maintenance Free Earthing ,Copper Clad Steet Sof Conductore, Exothermic Weld, External Lightning Protection and per IS/IEC62305, Surge Protection Devive as per IS/IEC 62035.
ABB low voltage surge arresters LOVOS-5 and LOVOS-10 are a new generation of LV surge arresters ensuring electrical protection of overhead lines, electric energy receivers, distributing transformers and low voltage electrical equipment. Specify and install ABB LOVOS type surge arresters to protect low voltage power equipment from the effects of lightning and switching overvoltages.
ABB low voltage surge arrester types LOVOS-5 and LOVOS-10 selection criteria : continuous operating voltage Uc, voltage protection level Up and energy absorption capability.
The ABB LOVOS range provides protection along LV overhead lines, cables, motors, switches, any equipment connected to the line, from the LV side of distribution transformers up to measuring instruments.
Typical places of installation
• low voltage switchgears, distribution transformers (LV side)
• transition points of insulated and uninsulated, overhead and underground lines and cables
• electricity service entrance locations to buildings (in cabinets or at poles)
• at junctions (branching])
• every 500 / 1000 m of overhead line in locations of high lightning activity
• at the end of dead-end feeder line
• at the sealing ends of inserted cables
• at any apparatuses connected to secondary voltage source
ABB Power Products - Low Voltage Capacitators, Low Voltage Surge Arresters, Low Voltage Surge Arresters, Low Voltage Plugs & Sockets ATEX, Medium - High Voltage Fuses (Indoor & Outdoor), Current Transformers, Voltage Transformers, Voltage Surge Arresters, Vacuum Contactors.
Device designed to test for the absence of voltage on HV systems up to 735 KV.
Its use is particularly recommended for voltages over 400 KV.
Indication of the absence of voltage and correct operation of the device by a green LED.
Self-test device.
Can be used in all weathers.
IEC 61243-1
This original configuration gives it very it very high performances, especially in the case of high RF induction and/or parasitic electric fields.
Mains frequency range : ; 50 or 60 Hz
Very sturdy polycarbonate casing.
Electronic cut-out if battery under threshold voltage of 8V.
Temperature range : from -25°C to +55°C
Power supply : one 9V alkaline battery.
Device comes in a metal case with hooks Ø 60 and 120mm and straight electrode 100mm.
IEC 61243-1 above 50kV to 780 kV
Temperature range : from -25°C to +55°C
Permanent standby, auto wake up
Sound and light indication
Fluke is a leading manufacturer of electronic tools and software. Fluke PAT testers are used for portable appliance testing to verify that the electrical safety and operation of the appliances meet the relevant regulations. Fluke PAT testers have powerful auto test capabilities and simplified controls, including 'one touch' test routines. Fluke also do lightweight all-in-one PAT testers, designed and built with the same rugged reliability as all other Fluke test and measurement instruments. These Fluke PAT testers are compact and will withstand the tough demands of working in the field. The Fluke PAT testing equipment provides a complete all-in-one solution, having features which are needed for testing portable appliances on-site. Fluke have a selection of both automatic and manual PAT testing equipment: the Fluke 6200 and the Fluke 6500. Both PAT testing systems perform all tests for class 1 and class 2 appliances and conform to safety standard EN61010. The Fluke 6200 is cost-effective and best used for manual testing and low volume applications. The Fluke 6500 is a more powerful portable appliance tester for checking a large number of appliances and has a wide range of pre-set tests, Compact Flash memory for storing and transferring test results and professional test models.
The Salisbury 40 cal/cm2 lt arc flash material makes working more comfortable then ever. Salisbury has made it even easier to do your job safely and comfortably. Salisbury offers an even lighter 40 cal/cm2 option with our LT line. The 40 cal/cm2 LT option is 10% lighter than the standard 40 cal/cm2 material making your job even more comfortable.
ll Salisbury PRO-WEAR® Arc FLash Protection Clothing has received the coveted CE certification. This Salisbury advantage is one more reason why Salisbury provides the best personal protective equipment available today. All Salisbury PRO-HOOD® Arc Flash Protection Hoods have also been CE certified. Look for the CE marking to see exactly which garments have been CE 0120 certified.
CE Marking is a mandatory conformity marking and refers to Product Safety. CE Marking on a product:
lIndicates that the product complies with the essential health and safety requirements of all applicable EU directives.
lA declaration by the manufacturer, or its representative, or the importer that those requirements have been met in full.
lA declaration that all conformity procedures have been completed. The product is allowed in the European market.
CSD Rise Multi Cable & Pipe Sealing System - Features :
Simple and effective : RISE Duct Seals are a multi-cable and pipe transit sealing system providing an effective and simple solution to all fire, gas and water tight duct sealing requirements.
Few Components : RISE Duct Seals system consist of only two components - 1) rubber insert sleeves used to guarantee cable separation and as a backing for the sealant layer, 2) FIWA sealant, a high quality silicone based, fire resistant, water repellent sealant which makes the duct seal system quick and easy to install.
Water and Gas Tight : RISE Duct Seals provide high elasticity and bonding strength which resists movement, shock and vibration providing a stable duct seal. RISE rubber insert sleeves are applied to provide cable separation and a backing for the application of the FIWA sealant. 60mm RISE sleeves are adequate for water and gas tight duct sealing.
Fire, Water and Gas Tight : RISE Duct Seals using rubber insert sleeves at a length of 160mm and applying FIWA sealant to both faces of the opening will provide a fire tight duct seal.
Flexible and Versatile : RISE Duct Seals can be used in vertical and horizontal ducts. RISE rubber insert sleeves cling to the cables without sliding down and falling out of the penetration. The high adhesion and viscosity of the duct sealant means it will not run or drip when applied overhead.
Adding and Removing Cables : RISE Duct Seals allow the installing of additional cables - it is a simple matter of coring into the soft rubber of the sealant to a depth of 20mm and passing the additional cables through the opening created. The duct sealant is then applied around the new cable to re-seal - there is no need to disassemble the transit system.
DC testing has been accepted for many years as the standard field method for performing high-voltage tests on cable insulation systems. Whenever DC testing is performed, full consideration should be given to the fact that steady-state direct voltage creates within the insulation systems an electrical field determined by the geometry and conductance of the insulation, whereas under service conditions, alternating voltage creates an electric field determined chiefly by the geometry and dielectric constant (or capacitance) of the insulation.
Under ideal, homogeneously uniform insulation conditions, the mathematical formulas governing the steady-state stress distribution within the cable insulation are of the same form for DC and for AC, resulting incomparable relative values; however, should the cable insulation contain defects in which either the conductivity or the dielectric constant assume values significantly different from those in the bulk of the insulation,the electric stress distribution obtained with direct voltage will no longer correspond to that obtained with alternating voltage.
CATU are world-market leaders in Electrical Safety Equipment for LV-HV Substation, Switchgear and Overhead Line projects and maintenance. T&D are CATU's largest UK distributor of Electrical Safety Equipment.
Catu insulating gloves provide high dielectric performance for LV-HV cable jointing, live-line, substation, overhead and underground cable installations - insulating gloves protect against electrical shock.
Catu Arc Flash Clothing & Protection Kits for working on LV-HV switchgear, cables and "racking-in and racking-out" of circuit breakers.
Catu Life Saving & Accident Intervention Kits are designed to make all necessary electrical safety equipment on-hand for rapid intervention and rescue up to 33kV.
Catu Kits include rescue stick, voltage detector, insulated cable cutting tool, insulating platform, rescue hook, insulating gloves and boots - mobile and wall-mounted substation kits.
Catu Short Circuiting & Earthing Kits suit overhead transmission and distribution lines, substation busbars, rail electrification, transformer and switchgear applications.
Short Circuiting and Portable Earthing Kits are available with a choice of earth clamps for both live and earth end in accordance with UK DNO, Network Rail and National Grid specifications - customised earthing kits to order.
Catu voltage detectors and phase comparators for voltage detection and integrity testing on LV-HV electricity transmission, distribution and overhead lines and cables.
Catu Electrical - Low & High Voltage Electrical Safety Equipment For Undergro...
Similar to Seaward - Electrical Testing & Voltage Detection, High Voltage Safety, HV Indicators, High Voltage Phasing Units, Halo Hook Ammeter, Type L Plus, AGL-5, Proving Units, PAT Tseters, Installation Systems
Takaya Flying Test is one of the most durable and provides high-accuracy, high-speed, and good-quality long lasting mechanics. Flying Probe machines, like those offered by Takaya, can probe the ends of component pads and uncovered vias to get access to the electrical networks.
A case study - STAG’s rapid understanding of the product under test and setting up a good test baseline significantly contributed to the successful technology upgrade of POS software and go-to-market with no quality degradation, within the stipulated time-frame, for a global leader in the secure electronic payment domain.
unicode Technology is an installation and service company with 4 years of experience in the design, engineering, assembly and maintenance of security automation sector. These systems include CCTV and Access Control. We are a team of dedicated professionals who can install and system from the very basic to the most complex. We’ve been always strong in resources for ongoing implementation of the latest electronic technologies.
The strength of our company is based on our talented and dedicated staffs who continuously demonstrate their commitment in providing a professional and reliable service every day.
Quality and competitiveness are words that have become synonymous with Unicode Technology. We’ve earned the trust of our customers through integrity, reliability and superior performance. We have challenged ourselves to be the link to 100% customer satisfaction.
Our customer base includes commercial and residential buildings, government facilities, distribution centers, industrial complexes, schools, restaurants, banks, hotels and retail stores… virtually any type of office or building space.
Our customers are the reason we exist, yet our employees are the reason we succeed… and while our systems may seem complex our philosophy is simple:
“Excellent Service at Fair Price Equals a Satisfied Customer.”
Our Solutions
Time & Attendance
Access Control
Bio-metric with Facial
CCTV
www.unic
EnviroSuite - A better way of managing your oil & gas operations. EnviroSuite takes the complexity out of environmental data, applies analytics and delivers you intelligence which translates directly to value. Sophisticated predictive and real-time knowledge in a simple, intuitive and portable interface.
With updates in real-time, understand your upstream, midstream and downstream operations across a facility, a region, or across your global sites simultaneously.
Stay in touch with instant alerts and advisories. EnviroSuite instantly notifies you if any of your sensors reach pre-determined thresholds; you will know the minute there is an issue.
Proactively mitigate environmental, operational and corporate risks. with 72 hour pollution impact forecasting; make the right decisions at the right times.
EnviroSuite empowers you with the information you need to apply your knowledge more efficiently, more accurately and with evidence of your actions. It saves you money by improving productivity, reducing costs and mitigating risks of environmental impact.
Exploring PCBLOOP: Innovations in PCB Fabrication and Assembly Technologypcbloop2
Welcome to PCBLOOP, your go-to place for all things PCB fabrication and assembly! With over 20 years of experience, we're experts in making printed circuit boards (PCBs). Our goal is simple: we want to make the best PCBs for our customers, whether they need a few or thousands. We care about quality, speed, and cost-effectiveness.
At PCBLOOP, we have top certifications like ISO 9001 and RoHS, showing our commitment to high standards and environmental friendliness. We believe in diversity, so we welcome people from all backgrounds to bring fresh ideas to the table.
We value our employees and offer them competitive pay, great benefits, and a supportive work environment. Whether you're starting or have years of experience, we have opportunities for you. Join us at PCBLOOP and be part of a company that's leading the way in PCB technology. Visit our website: https://www.pcbloop.com/pcb-fabrication/
Similar to Seaward - Electrical Testing & Voltage Detection, High Voltage Safety, HV Indicators, High Voltage Phasing Units, Halo Hook Ammeter, Type L Plus, AGL-5, Proving Units, PAT Tseters, Installation Systems (20)
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
GridMate - End to end testing is a critical piece to ensure quality and avoid...ThomasParaiso2
End to end testing is a critical piece to ensure quality and avoid regressions. In this session, we share our journey building an E2E testing pipeline for GridMate components (LWC and Aura) using Cypress, JSForce, FakerJS…
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Communications Mining Series - Zero to Hero - Session 1DianaGray10
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
SAP Sapphire 2024 - ASUG301 building better apps with SAP Fiori.pdfPeter Spielvogel
Building better applications for business users with SAP Fiori.
• What is SAP Fiori and why it matters to you
• How a better user experience drives measurable business benefits
• How to get started with SAP Fiori today
• How SAP Fiori elements accelerates application development
• How SAP Build Code includes SAP Fiori tools and other generative artificial intelligence capabilities
• How SAP Fiori paves the way for using AI in SAP apps
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Seaward - Electrical Testing & Voltage Detection, High Voltage Safety, HV Indicators, High Voltage Phasing Units, Halo Hook Ammeter, Type L Plus, AGL-5, Proving Units, PAT Tseters, Installation Systems
1. 3
Experts in what we do.
■ Portable Appliance Testing Solutions
■ Installation Testing Solutions
■ High Voltage Testing Solutions
2. In safety testing, the bottom line
is human life. So it’s our business
to know your work inside out.
As part of your team, with the
best technology.
Welcome to Total Test Solutions.
6. 4
PAT SYSTEM
Smart technology and an
intimate knowledge of the job
result in Testers designed for
easier work and better profits.
Today’s world moves at an unprecedented pace: things change every
day. Everything’s smarter, smaller and faster. This is good news for us,
and for you. It means we’re developing and manufacturing better
equipment and can incorporate technologies like Bluetooth data
transfer and PDA test management databases. And we’re not
confined to supplying test equipment. We can now help your business
or institution become more efficient and effective. We call it
PATSolutions. This groundbreaking process involves everything from
choosing your PAT Tester to following up with calibration services and
training courses. It streamlines your processes, reduces costs,
increases productivity and improves profits.
7. 5
Seaward offers everything from
Bluetooth technology to a basic
PASS/FAIL Tester. Our
revolutionary PAT Tester range
includes handheld formats
capable of carrying out a variety of
full and comprehensive tests.
Because of our experience in the
field, we’ve been able to develop a
range of PAT Tester accessories
which help you save time and
reduces the need for repetition.
Now, for example, you can print
labels directly from the Tester, label
the appliance, scan, store and
retrieve information. And that’s just a
small sample of what you can do.
Use mobile technology for remote
working. Transferring records to
the PDA for re-test and results
back to PATGuard databases to
create up-to-date records.
Our PATGuard software range is
highly functional, easy to use and
helpful; superbly user-friendly in fact.
It’s available in different versions
depending on what you need. Our
software packages utilise full test
records, scheduling and pre-emptive
automated notification. All features
which add value to your business.
Testers Printers
& Accessories
Mobile Testing
Software
Asset Management
Software
TEST INFORMATION
TEST INFORMATION
TEST INFORMATION
5
Experts in what we do.
8. 6
PAT Software
PATGuard 2. New generation
software that takes the stress
out of the testing process.
At Seaward, we focus on more than Tester improvement.
We offer a total solution, which makes PAT Testing a lot quicker and
easier. From test and measurement equipment, right through to
software and accessories. Our PATGuard 2 software is functional,
easy to use and helpful. It comes in four versions, each providing an
optimum solution to a particular requirement. PATGuard 2 and our
Work About 2 software bring added value to your customer offer.
Proactive and user friendly, it presents you with a totally connected
system which lets its various parts ‘talk to each other’. It can email
you to warn you when it’s time to re-test, for instance. Features like
this cut admin time and let you get on with what you’re good at.
9. Provides clear information on test user activity Bluetooth technology for wireless data transfer▲ ▲
Experts in what we do.
10. 88
Test n tag system
Fast, automatic printing of
appliance test labels direct
from the test instrument.
Work is hard enough without the complications of using inferior
products. Which is why at Seaward everything we do is designed to
make your work easier and more efficient. Our new generation Test n
Tag printers are perfectly equipped to help. Up to the minute
Bluetooth technology means information can be transferred
immediately from your Tester. Moments later, a tamper and
waterproof label can be printed, with or without your logo. Of course
we ensure your new printer is tough enough to last a very long time
and clever enough to manage its own power usage. Printers like
these will not only shorten the time you spend at each test site, they
will make the process of test n tagging much easier.
On completion of the test
routine, choose the type of label
you would like. It is then printed
automatically from the Tester.
1
Use the peelstick, if needed, to
help remove the backing from
the panel.
2
Attach panel label to side of
tested appliance.
Or attach a cable wrap label.
3 4
12. 10
Professional advice
Our customers review
our three most advanced
PAT Testers.
In the high pressure world of services
maintenance, the right tools are essential.
Romec think the Supernova out performs
everything in its class.”
“ “The PrimeTest 200 is a remarkable Tester.
It has made our daily work easier and our
business more profitable. We love it.”
Romec technicians major in test and inspection services. We
maintain essentials for blue chip clients like Royal Mail, Standard Life
and Thomas Cook. There’s no margin for error.
Seaward’s Supernova Plus is the most comprehensive, useful Tester
on the market. It’s a sophisticated piece of kit and it deals with any
test exceedingly well!
Best of all, we don’t have to wait for information to download: it also
takes care of all connections (printer, PC, Modem, everything). And
the walk through instructions for each test on the big LCD make
getting up and running so easy.
Market leaders and innovators can’t work with anyone who gives less
than the best. That’s why Dyson uses The PrimeTest range.
The small, handheld PrimeTest 200 is three Testers in one. It enables
you to PAT test, perform installation checks, make digital multimeter
readings and take temperature measurements. The 200 incorporates
all electrical safety tests for Class I and II equipment, and digital
multimeter test functions. So it confirms a domestic appliance’s
safety and checks the condition of the circuit it’s attached to.
Because it multi-tasks, it means you don’t have to carry a ton of
equipment around with you.
13. 11
The PrimeTest 300 has revolutionised the
way we go about the job of electrical
safety testing. It’s accurate, tough, easy
to use and outright brilliant.”
“
Britain suffers an average of 1000 electrical accidents annually.
Roughly thirty of those kill people. Consider these facts alongside
statutory health and safety responsibilities, a growing blame culture
and the increasing vigilance of commercial insurance companies and
punitive corporate manslaughter penalties and you’ll understand why
maintaining electrical safety is a priority for all of Kitchener’s 2000
employees. We carry out around 700,000 electrical tests for 500
customers a year. And we can’t afford to use anything but the best
testing equipment. This is why we choose Seaward. We have just
started to use the Bluetooth enabled PrimeTest 300.
Experts in what we do.
14. 1212
PAT Guide
A handy reference
for your perfect
PAT Testing solution.
Functions Testers
Testers & Functions
▲
▲
Mains Supply Check
PASS/FAIL Indicators
Earth Test Lead Null
Earth Continuity (100mA)
Earth Continuity (200mA)
Earth Continuity (4A)
Earth Continuity (10A)
Earth Continuity (25A)
Insulation Resistance (250V)
Insulation Resistance (500V)
PE Conductor Current (Earth Leakage)
Touch Current
Alternative Substitute Leakage
Flash Test
230V/110V INPUT/OUTPUT
IEC Lead Test
Earth Loop Test (Digital Reading)
RCD Test
3 Phase Leakage
Custom LCD
Graphical LCD
Back Light
Keyboard
Barcode Scanner Input
Test n Tag
Bluetooth (Wireless)
Handheld
Battery Powered
Rechargeable Batteries
Weight
Auto Testing
Programmable Pass/Fail Limits
User Tests for Non Electrical Assets
Pass/Fail Program Indicators
PE Resistance Limit Calculator
Memory Size
PC Download
PC Upload
Graphical Online Help
Real Time Clock
Supernova Elite Europa PlusPT350 PT100 PT50
■
■
4-Wire
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
9.5kg
■
■
■
5000 records
■
■
■
■
■
■
4-Wire
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
3.5kg
■
■
■
5000 records
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
1.0kg
■
■
■
■
8000 records
■
■
■
■
■
■
■
■
■
■
■
■
■
Optional
1.0kg
■
■
■
■
■
■
■
■
■
Optional
1.0kg
■
PT250
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Optional
1.0kg
■
■
15. Accessories
Software
Accessories Testers
▲
▲
230/110V Adaptor
110/230V Adaptor
Appliance Number Labels
Test Code Labels
Custom Appliance Number Labels
CCD Scanner
3 Phase Adaptors (Delta 4 pin 16A)
3 Phase Adaptors (Star 5 pin 16A)
3 Phase Adaptors (Delta 4 pin 32A)
3 Phase Adaptors (Star 5 pin 32A)
3 Phase Adaptor (leakage and earth continuity)
NTB-1 RCD Isolator Adaptor
PAT CheckBox
Europa Series Carry Case
Thermal Label Printer
Modem Kit
Supernova Plus Carry Case
Test n Tag Printer
Test n Tag Elite
Test n Tag Kit
Bluetooth Thermal Printer
Portable Appliance Register and Test Record
NIMH Batteries & Battery Charger
Bluetooth/RS232 Adaptor
Bluetooth/ Test n Tag Printer Adaptor
Log Cards
Pass Labels
Braincells Read/Write Reader
Braincells Self Adhesive Tag (50)
Braincells Cable-Tie Tag (50)
Bluetooth Scanner
PAT Training DVD
Supernova ElitePart Number Europa PlusPT350 PT100 PT50
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
270A076
281A075
194A307
194A308
194A323
194A922
209A910
209A911
209A912
209A913
391A910
372A953
227A910
270A951
283A954
283A969
298A950
308A924
339A970
308A915
339A930
998A223
339A950
339A960
342A914
91B037
91B038
288A910
288A953
288A954
339A923
998A104
Software
▲
▲ Supernova Elite Europa PlusPT350
PATGuard Elite SQL 2
PATGuard Elite 2
PATGuard Pro 2
PATGuard Lite 2
PATGuard Work About 2
PATGuard Time Manager 2
PATGuard Elements
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Tester PT250** PT100** PT50**
■
■
■
■
■
■
■
■
■
■
■
■
■
■
* Manual input - download not supported
** Manual input only as Tester does not have memory
13
Experts in what we do.
PT250
■
■
■
■
■
■
■
■
■
■
■
16. Primetest 350
The most advanced Tester
in the world. The ultimate
choice for professionals.
■ PrimeTest 350 Tester
■ Carrying case
■ PATGuard Elite 2 Software
■ Calibration certificate
■ Battery charger
■ Test leads and adaptors
■ Test n Tag Elite printer
■ Bluetooth laser scanner
■ PATGuard support contract
■ PAT testing guide
■ PAT CheckBox
The PrimeTest 350 PAT tester enables fast and efficient portable
appliance testing. This handheld battery powered tester stores results
and connects wirelessly via Bluetooth to results printers and barcode
scanners. Test results can be transferred to a PC and PAT testing
software via USB connection.
In addition to being lightweight and handheld, the PrimeTest 350's data
logging feature means results, asset IDs, location and other data can
be stored and transferred to PAT testing software such as the Seaward
PATGuard Elite package for record keeping and traceability. Its vast
range of tests include alternative leakage, 250V insulation and load is
measured during the protective conductor and touch current tests.
Advanced PATSolutions Package:
PATSolutions is a way of approaching all aspects of electrical testing.
From Testers themselves to information management software,
through to label printers and more.
You can buy each Tester and its accessories separately or as an
optional PATSolutions Package which includes everything you need to
run an efficient, effective PAT testing business.
■ PAT Testers ■ Facilities Managers
■ Electrical Contractors ■ Manufacturers
Handheld
Battery powered
USB & Bluetooth download
Load test
User definable tests
In-situ rechargeable batteries
Ideal users:
14
17. 15
PAT TESTS
Earth Continuity
Test Current +/- 200mA
Display Range 0.00ohm - 19.99ohm
Pass Value User Defined
Insulation Resistance
Test Voltage 500V / 250V DC @ 1mA nominal
Display Range 0.01Mohm - 199Mohm
Pass Value User Defined
IEC Lead Test
Tests Performed Earth, Insulation Resistance, Live &
Neutral Continuity
Protective Conductor Current/Load
Test Voltage 195V - 230V, 45Hz - 60Hz
Display Ranges 0.15mA - 19.99mA
0.00kVA – 4.00kVA
0.00A – 16.00A
Pass Value User Defined
Touch Current/Load
Test Voltage 195V - 230V, 45Hz-60Hz
Display Ranges 0.07mA - 3.5mA
0.00kVA – 4.00kVA
0.00A – 16.00A
Pass Value User Defined
Alternative Leakage Current
Test Voltage 40V, 50Hz
Display Range 0.10mA - 19.99mA
Pass Value User Defined
RCD Trip Time
Test Current 30mA rms, 0º/180º auto switched
Display Range 0ms - 200ms
Loop Impedance
Test Current Non-tripping for >30mA RCD
Display Range 0.0ohm - 199ohm
Power Socket Test
Voltage Range 195V – 253V
Voltage Indicators Phase to Earth Voltage
Phase to Neutral Voltage
ADDITIONAL INFORMATION
Memory size 8000 records
Weight & Dimensions 0.9kg / 26cm x 10cm x 5.5cm
Power Source 6 x AA NiMH rechargeable batteries
ACCESSORIES
Hardware
Test n Tag printer (308A924)
Test n Tag Elite printer (339A970)
Bluetooth Laser Scanner (339A923)
PAT CheckBox (227A910)
Bluetooth Test n Tag Printer adaptor (342A914)
Software
PATGuard Elite SQL 2 (352A950)
PATGuard Elite 2 (352A910)
PATGuard Pro 2 (352A920)
PATGuard Lite 2 (352A930)
PATGuard Work About 2 (336A910)
PATGuard Time Manager 2 (334A910)
Training
PrimeTest 350 Training Course
PATGuard 2 Software Training Course
Services
Service & Calibration
JumpStart
PrimeTest 350 part no: 356A910
PrimeTest 350 Advanced PAT Solutions part no: 345A913
Experts in what we do.
18. 16
Supernova ELITE
A comprehensive, dual voltage
PAT with flash test.
■ Supernova Elite Tester
■ PATGuard Elite 2 Software
■ Connectors
■ Test n Tag printer
■ Calibration Certificate
■ PATGuard support contract
■ PAT Testing Guide
■ Barcode scanner
The Supernova Elite is a ruggedly put together, comprehensive Tester
that you’ll find indispensable. It will carry out any test you require,
including flash testing, RCD trip time and dual voltage capability.
It’s packed with incredibly useful features, like a 5000 test record
memory, storing locations, user, test status and date. It links to a PC
and has a Modem for remote transfer of information. It has connections
for a barcode reader (generating barcodes via a thermal printer), a brain
cell scanner, a printer and a parallel printer port. It has a large LCD
display for easy use, legible walk-through instructions for each test and
it downloads fast. Asset management is supported by three
software options.
Advanced PATSolutions Package:
PATSolutions is a way of approaching all aspects of electrical testing.
From Testers themselves to information management software,
through to label printers and more.
You can buy each Tester and its accessories separately or as an
optional PATSolutions Package which includes everything you need to
run an efficient, effective PAT testing business.
■ Construction Industry ■ Hire Companies
■ Manufacturers ■ Facilities Managers
Any test, any appliance
Full dual voltage
Fast downloads
Comprehensive connectivity
Walk through instructions
Remote modem download
Ideal users:
19. 17
PAT TESTS
Earth Continuity
Test Currents 25A, 10A, 4A, AC
Display Range 0.00ohm - 19.99ohm
Pass Value User Defined
Measurement Technique 4 Wire Measurement, Floating Earth
Earth Screen Continuity
Test Current 100mA
Display Range 0.00ohm - 19.99ohm
Pass Value User Defined
Measurement Technique 4 Wire Measurement, Floating Earth
Insulation Resistance
Test Voltage 250V, 500V DC
Display Range 0.1Mohm - 100Mohm
Pass Value User Defined
Flash
Test Voltage Class I 1500V mns
Test Voltage Class II 3000V rms
Display Range 0.05mA - 2.5mA
Pass Value User Defined
RCD Trip Time Test
Test Current 30mA
Display Range 0ms - 500mA
Pass Value 200ms
Protective Conductor Current
Test Voltage 230V/110V
Display Range 0.1mA - 10mA
Pass Value User Defined
Touch Current
Test Voltage 230V/110V User Selectable
Display Range 0.1mA - 2.0mA
Pass Value User Defined
Alternative / Substitute Leakage
Test Voltage 40V AC Nominal
Display Range 0.1mA - 2.0mA
Pass Value User Defined
Load Test
Display Range 0kVA - 4.2kVA
IEC Lead Polarity
Tests Performed Live/Neutral Continuity and Polarity
ADDITIONAL INFORMATION
Voltage Range 103V - 126V, 207V - 253V, 45Hz - 65Hz
Weight & Dimensions 9.5kg / 40cm x 32cm x 16cm
Keyboard QWERTY
Display graphic LCD - 1/4 VGA (320 x 240 pixels)
Connectivity RS232 Port Connection
Parallel Port Connection
ACCESSORIES
Hardware
Test n Tag printer (308A924)
Modem kit (283A969)
Braincell Wand (288A910)
Braincells (288A953)
Supernova / Europa PAT CheckBox (283A951)
Bluetooth Download Adaptor (339A962)
Software
PATGuard Elite SQL 2 (352A950)
PATGuard Elite 2 (352A910)
PATGuard Pro 2 (352A920)
PATGuard Lite 2 (352A930)
PATGuard Work About 2 (336A910)
PATGuard Time Manager 2 (334A910)
Training
Supernova Elite Training Course
PATGuard 2 Software Training Course
Services
Service & Calibration
JumpStart
Supernova Elite part no: 283A936
Supernova Elite Advanced PAT Solutions part no: 323A910
Experts in what we do.
20. 18
europa plus
A Portable PAT Tester with large
internal memory.
■ Europa Plus Tester
■ PATGuard 2 Software
■ Test n Tag printer
■ Connectors
■ Barcode scanner
■ Tester case
■ Calibration certificate
■ PATGuard support contract
■ PAT Testing Guide
The Europa Plus is a portable, high volume Tester that’s impressed
everyone who’s worked with it. It has a full compliment of tests and
dual voltage abilities. You can test any appliance with it. It does in-situ
Earth Bond and Touch Current Tests while the equipment being tested
stays powered up, perfect when the equipment can’t be powered
down e.g. servers. It can also record asset details for maintenance,
which allows you to print labels and download the results into a
software management system. With in-situ testing, there’s less time
involved in disconnecting the appliance from accessories and powering
down critical equipment. All of which makes your working day a lot
shorter. Believe us, it’s fast.
Advanced PATSolutions Package:
PATSolutions is a way of approaching all aspects of electrical testing.
From Testers themselves to information management software,
through to label printers and more.
You can buy each Tester and its accessories separately or as an
optional PATSolutions Package which includes everything you need to
run an efficient, effective PAT testing business.
■ PAT Testers ■ Facilities Managers
■ Electrical Contractors ■ Manufacturers
Shorter test times
In-situ tests
Easy to use
Record asset details
Comprehensive testing
Remote modem download
Ideal users:
21. 19
PAT TESTS
Earth Continuity
Test Currents 25A AC, 10A AC, 4A AC±200mA DC
Display Range 0.00ohm - 19.99ohm
Pass Value User Defined
Measurement Technique 4 Wire Measurement, Floating Earth
Earth Screen Continuity
Test Current 100mA
Display Range 0.00ohm - 19.99ohm
Pass Value User Defined
Measurement Technique 4 Wire Measurement, Floating Earth
Insulation Resistance
Test Voltage 250V, 500V DC
Display Range 0.1Mohm - 100Mohm
Pass Value User Defined
Protective Conductor Current
Test Voltage 230V
Display Range 0.1mA - 10mA
Pass Value User Defined
Touch Current
Test Voltage 230V
Display Range 0.1mA - 2.0mA
Pass Value User Defined
Substitute Leakage
Test Voltage 40V AC Nominal
Display Range 1.00mA - 19.99mA
Pass Value User Defined
Load Test
Display Range 0kVA - 4.2kVA
IEC Lead Polarity
Tests Performed Live/Neutral Continuity and Polarity
ADDITIONAL INFORMATION
Voltage Range 207V - 253V, 45Hz - 65Hz
Weight & Dimensions 3.5kg / 31cm x 21cm x 8cm
Display Graphic LCD - 1/4 VGA (320 x 240pixels)
Connectivity 2 Serial Port Connections
Keyboard QWERTY
ACCESSORIES
Hardware
Test n Tag printer (308A924)
Modem kit (283A969)
Braincell Wand (288A910)
Braincells (288A953)
Supernova / Europa PAT CheckBox (283A951)
Bluetooth Download Adaptor (339A962)
Software
PATGuard Elite SQL 2 (352A950)
PATGuard Elite 2 (352A910)
PATGuard Pro 2 (352A920)
PATGuard Lite 2 (352A930)
PATGuard Work About 2 (336A910)
PATGuard Time Manager 2 (334A910)
Training
Europa Plus Training Course
PATGuard 2 Software Training Course
Services
Service & Calibration
JumpStart
Europa Plus part no: 302A910
Europa Plus Advanced PATSolutions part no: 324A910
Experts in what we do.
22. Primetest 250
A comprehensive handheld PAT tester.
The Engineer’s ideal companion.
■ Primetest 250 Tester
■ PATGuard Elements Manual
data entry software
■ Durable purpose-made
carry bag
■ 110V adaptor
■ PAT Training DVD
■ Guide to PAT Testing
■ PAT Reference Card
■ Business Builder CD-Rom
■ Portable appliance register
and test record
■ 500 pass labels and
500 fail labels
The PrimeTest 250 will perform all of the tests required by the IEE Code
of Practice, including RCD trip-time, protective conductor current and
touch current. It also includes a 250V DC insulation test for sensitive
electrical appliances and surge protected leads, and it is also capable
of testing 3-phase machinery.
This highly versatile instrument tests most workplace appliances using
long-life battery power; when protective conductor current or touch
current measurements are required, simply connecting a mains supply
will automatically select the correct test sequence.
*For 3 phase and RCD testing, accessories are required.
PrimeTest 250 PATBag
Seaward manual PATBags contain everything needed to perform
safety tests with total accuracy and speed. Each is brimming with
high quality accessories, software, training, guides and invaluable
resource material.
PATBag Kit Contents:
■ In-house safety testing engineers
■ Electrical Contractors ■ Service & Maintenance Engineers
Easy to use manual tester
Comprehensive tests range
Clear PASS/FAIL indication
Equivalent leakage
Protective Conductor / Touch Current
Automatic test sequences
Ideal users:
Backlit for illustration purposes
20
23. 21
Experts in what we do.
PAT TESTS
Earth Continuity
Output Current: 200mA minimum into 2Ω
Test Voltage (o/c): 9V DC nominal
Test Duration (Class I Test): 2s nominal
Display Range: 0.01 ohm to 19.99 ohm
Pass Value (Class I Test): 0.2Ω
Insulation Resistance
Test Voltage: 250/500VDC @1mA nominal,
< 2mA (s/c)
Test Duration (Class I or II): 2s
Display Range: 0.01 Mohm to 19.99 Mohm
Pass Value: 1.0 MΩ Class , 2.0 MΩ Class II
Equivalent Leakage
Test Voltage: 40V Nominal AC 50Hz Open Circuit
Test Duration: 2s – 30s nominal
Display Range: 0.1 mA to 19.99mA
Pass Value: 0.75mA CLI / 0.25mA CL II
IEC lead test
Test voltage: 5V DC nominal
Test Duration: Time for test (2s max)
Test: Live / Neutral Checks for o/c, s/c
and crossed
Protective Conductor Current
Test Voltage: Supply Voltage, max current 13A
Test Duration: 30s maximum
Display Range: 0.15 mA to 9.99 mA
Pass Value: 0.75mA/3.5mA (user selectable
with 0.75mA as default)
Touch current
Test Voltage: Supply Voltage, max current 13A
Test Duration: 30s maximum
Display Range: 0.10 mA to 5.00 mA
Pass Value: 0.25mA
3 phase leakage current *Requires 3 phase adaptor accessory
Test Voltage: 3 phase supply voltage
Test Duration: Continuous measurement
Display Range: 0.10 mA to 9.99 mA
Pass Value: 3.5mA
RCD trip time
Test Voltage: Mains supply voltage
Test Current: 30mA rms sinusoidal
Test Current Phase: 0°/180° auto switched on
alternate tests
Measuring Range: 0ms – 500ms
Pass Value: 200ms
Power socket check
Input voltage range: 225 – 254V AC max current 13A UK
Indicates configuration
of voltage potential:- Line potential phase to earth
Line potential phase to neutral
Line potential neutral to earth
ADDITIONAL INFORMATION
Weight & Dimensions 1.0kg / 26cm x 10cm x 5.5cm
Power Source 6 x AA Batteries
ACCESSORIES
Hardware
NTB-1 RCD Isolator (372A953)
3 Phase Adaptor (leakage and earth continuity) (391A910)
PowerCheck 1557 (369A910)
PAT Checkbox (227A910)
Software (Manual input only as tester has no memory)
PATGuard Elements (387A910)
Training
PAT Training DVD (998A104)
Services
Service & Calibration
PrimeTest 250 part no: 382A910
PrimeTest 250 PATBag part no: 345A928
Experts in what we do.
24. Primetest 100
A powerful, push-button
appliance and socket Tester.
■ Primetest 100 Tester
■ PATGuard Elements Manual
data entry software
■ Durable purpose-made
carry bag
■ 110V adaptor
■ PAT Training DVD
■ Guide to PAT Testing
■ PAT Reference Card
■ Business Builder CD-Rom
■ Portable appliance register
and test record
■ 500 pass labels and
500 fail labels
The PrimeTest 100 is top of its class, no ifs, no buts. A highly useful,
functional and diverse tool, the 100 has three operational modes and is
an easy to use, comprehensive unit. Push a button and you get the
option of either, Class I PAT test, Class II PAT test or IEC Lead test.
Connect the 100 to a power outlet and it will automactically check the
socket wiring and mains voltage. Its large display shows test result
values as well as a PASS or FAIL indication. Battery powered like all
PrimeTests, it’ll help you work quicker and more efficiently. PATGuard
Work About 2 software enables you to record information on site for
storage in a PAT test record database. A really versatile Tester: ask
anyone who uses it.
PrimeTest 100 PATBag
Seaward manual PATBags contain everything needed to perform
safety tests with total accuracy and speed. Each is brimming with
high quality accessories, software, training, guides and invaluable
resource material.
PATBag Kit Contents:
■ Maintenance Staff ■ Schools & Colleges
■ Care Homes ■ Leisure Industry
Versatile tester
Handheld
Clear display
Easy to use
Battery powered
PASS/FAIL indication
Ideal users:
Backlit for illustration purposes
22
25. 23
Experts in what we do.
PAT TESTS
Earth Continuity
Test Current +/- 200mA DC
Display Range 0.00ohm - 19.99ohm
Pass Value 0.2ohm
Insulation Resistance
Test Voltages 500V DC
Display Range 0.20Mohm - 19.99Mohm
Pass Value 1Mohm Class I, 2Mohm Class II
IEC Lead Test
Tests Performed Earth Continuity
Insulation Resistance
Live, Neutral Continuity and Polarity
Equivalent Leakage Class I
Test Voltage 40V AC Nominal
Display Range 0.10mA - 19.99mA
Pass Value 0.75mA
Equivalent Leakage Class II
Test Voltage 40V AC Nominal
Display Range 0.10mA - 19.99mA
Pass Value 0.25mA
CIRCUIT TESTS
Power Socket Test
Input Voltage Range 230V +10%, - 15% AC
Indicators Phase to Earth Voltage,
Phase to Neutral Voltage,
Neutral to Earth
ADDITIONAL INFORMATION
Weight & Dimensions 0.8kg / 26cm x 10cm x 5.5cm
Power Source 6 x AA Batteries
ACCESSORIES
Hardware
Battery Charger + Rechargeable NiMH Batteries (339A950)
PAT CheckBox (227A910)
Software (Manual input only as tester has no memory)
PATGuard Elements (387A910)
Training
PAT Training DVD (998A104)
Services
Service & Calibration
JumpStart
PrimeTest 100 part no: 344A910
PrimeTest 100 PATBag part no: 345A926
26. Primetest 50
A basic, handheld safety checker
that’s easy to use.
■ Primetest 50 Tester
■ PATGuard Elements Manual
data entry software
■ Durable purpose-made
carry bag
■ 110V adaptor
■ PAT Training DVD
■ Guide to PAT Testing
■ PAT Reference Card
■ Business Builder CD-Rom
■ Portable appliance register
and test record
■ 500 pass labels and
500 fail labels
Like all its fellow PrimeTests, the 50 is light and portable but has a
greatly simplified range of tests. All you need to do is choose the test
you need, either Earthed appliance, double insulated appliance or
mains cord testing. Its easy to read display is simple and registers
PASS or FAIL. Connect the 50 to a power outlet and it will
automatically check the socket wiring and mains voltage. It doesn’t get
much simpler. PATGuard Work About 2 software is optional if you need
to record the latest test result information, so it’s easy to manage test
information too. The 50 is rugged and easily able to withstand anything
the working day brings with it. An obvious choice if you’re looking for a
reliable, portable safety Tester that’s easy to use.
PrimeTest 50 PATBag
Seaward manual PATBags contain everything needed to perform
safety tests with total accuracy and speed. Each is brimming with
high quality accessories, software, training, guides and invaluable
resource material.
PATBag Kit Contents:
■ Maintenance Staff ■ Schools & Colleges
■ Care Homes ■ Leisure Industry
Cord test
Handheld
Tests Class I & Class II
Easy to use
Battery powered
LCD display
Ideal users:
Backlit for illustration purposes
24
27. 25
PAT TESTS
Earth Continuity
Test Current +/- 200mA DC
PASS/FAIL Threshold 0.2ohm
Insulation Resistance
Test Voltages 500V DC
PASS/FAIL Threshold 1Mohm Class I, 2Mohm Class II
IEC Lead Test
Tests Performed Earth Continuity
Insulation Resistance
Live, Neutral Continuity and Polarity
CIRCUIT TESTS
Power Socket Test
Input Voltage range 230V +10%, -15% AC
Indicators Phase to Earth Voltage
Phase to Neutral Voltage
Neutral to Earth
ADDITIONAL INFORMATION
Weight & Dimensions 0.8kg / 26cm x 10cm x 5.5cm
Power Source 6 x AA Batteries
ACCESSORIES
Hardware
Battery Charger + Rechargeable NiMH Batteries (339A950)
PAT CheckBox (227A910)
Software (Manual input only as tester has no memory)
PATGuard Elements (387A910)
Training
PAT Training DVD (998A104)
Services
Service & Calibration
JumpStart
PrimeTest 50 part no: 347A910
PrimeTest 50 PATBag part no: 345A930
Experts in what we do.
28. 26
PATGuard 2 Software
World-leading software
that makes life easier
PATGuard Elite 2.
World-leading PAT software that makes life easier.
If you PAT test on a regular basis this is an ideal bit of software. It gives
you complete quick and easy management of the PAT testing process.
One program supplies the total solution. From the first test, to
downloading results, certificates, planning re-tests and uploading. Its
extensive features are simple to use and include clear re-test
identification, optional email alerts for re-testing and a huge range of
reports to help you increase the speed of your business. PATGuard
Elite 2 connects direct to your Tester and uploads and downloads fast.
How easy is it to learn? PATGuard Elite 2 uses Windows-based
information management, so it’s pretty simple.
Part no: 352A910
PATGuard Elite SQL 2.
SQL database, multi-user version of
PATGuard Elite 2.
This version of PATGuard Elite 2 is designed to give multi-users
simultaneous access to SQL databases. It’s compatible with all
Microsoft SQL Server 2005 programs and Oracle 10g, includes
Download Preview, to correct download data prior to processing,
and includes Safety First Express import.
Part no: 352A950
■ Health & Safety Managers ■ PAT Service Providers
■ Maintenance Managers ■ Facility Managers
Auto re-test schedules
Easy to use graphic display
Generates pdf files
Email safety alerts
Total record management
Compatible with leading PAT Testers
Ideal users:
Trybeforeyou buyDownload trial version atwww.seaward.co.uk
29. 27
PATGuard Lite 2.
Entry level software that helps businesses succeed.
PATGuard Lite 2 is an excellent entry level software package which
facilitates fast, effective downloading of test information and certificate
printing. If you need software to help you with quick, basic testing,
PATGuard Lite 2 is the perfect solution for your business or personal
use. PATGuard Lite 2 is a low cost piece of software which produces
records and certificate documentation to support PAT testing and
allows you to download test results in a swift, effective fashion. It’s
extremely easy to use, even if you’ve only received the most basic
training. And it’s easy to learn because it uses Windows-based
information management.
Part no: 352A930
PATGuard Pro 2.
Your powerful, user-friendly, comprehensive
program.
If you require asset management information, this is the comprehensive
software package for you. It enables you to capture a lot more
information from the PAT Tester and it stores more information on the
appliance’s history. PATGuard Pro 2 gives you access to a vast range
of reports, as well as more information on your test record and clear
identification of items which need to be re-tested. And it gives you it
fast, very fast indeed. PATGuard Pro 2 uses Windows-based
information management so it’s really easy to learn how to use.
Part no: 352A920
PATGuard Elements
An easy-to-use manual entry PAT testing software
packed with useful features.
PATGuard Elements is a manual entry PAT software program, designed
to enable a formal log of portable appliance test results to be stored
and called upon as required. This easy-to-use program boasts many
useful features, including a wide range of test reports. It also has a test
history feature which enables any new test results to be added to the
history of an existing appliance. An easy set up wizard and upgrade
path to the PATGuard Elite PAT software program make PATGuard
Elements a prudent choice for those starting out in PAT testing or with
an in-house PAT testing responsibility.
Part no: 387A910
Experts in what we do.
30. 28
PATGuard 2 Software
World-leading software
that makes life easier
PATGuard Work About 2.
Improve your data management with your own
Personal Digital Assistant.
This specially designed software package lets you record results quickly
and easily. Using a PDA lets you test simply and easily from any Tester
(it doesn’t have to be a Seaward). All you have to do is put the information
into the PDA and store it for later use. During the actual testing, the
remote off-site working gives you the freedom and flexibility to work in a
much smarter way. PATGuard Work About 2’s easy to learn, because it
uses familiar Pocket PC interfaces combined with PATGuard’s Windows-
based test record management. PDA and mobile technology mean that
you can email pre-test PAT Test records and results when used with
PATGuard databases. Part no: 336A910
PATGuard Time Manager 2.
Essential kit for test time management.
Ideal for companies which manage off-site or remote testing staff,
because it provides clear time management facilities. It gives you total
confidentiality because it runs independently of PATGuard data
management software. Its simple-to-read graphical data display provides
you with clear information on users’ activity, in other words, the number
of tests taken and the time of those tests. So it helps you understand
how the Testers are used, meaning that you can identify where
improvements can be made to training. Time Manager 2 is a great way
to help achieve faster, more efficient testing. Part no: 334A910
■ PAT Testers ■ Facilities Managers
■ Electrical Contractors ■ Manufacturers
Easy to use
Remote download/upload
Manage test usage
Record all tests
Remote data transfer
Wireless
Ideal users:
Try
before
you buy
Download trial version at
www.seaward.co.uk
31. 29
Experts in what we do.
PATGuard
Pro 2
■
■
■
■
■
■
■
■
■
■
■
■
■
■
PATGuard
Lite 2
■
■
■
■
■
■
■
PATGuard
Elements
■
■
■
■
■
■
■
■
■
Rapid manual data entry
Manual data entry
Microsoft SQL server 2005/2008 compatible
Oracle 10g Compatible
Multi-user simultaneous access to database
Safety First Express import
Preview & correct download before processing
Automatic email safety alerts
Automatic re-test scheduling
Create a view only PATGuard for clients
Upload sites, locations, asset IDs & test sequences
Download compatible with large range of testers
Repair logging
Range of comprehensive test reports
Range of test reports
Full test history per asset record
Clear re-test identification
Tester update program
Test n Tag logo transfer
Windows-based test record database
Invoice generator
Test certificate report
Set-up wizard
Create test programs for different test situations
Compatible with PATGuard Work About 2
PATGuard
Elite SQL
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
PATGuard
Elite 2
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
PATGuard Software Specification Chart
FEATURE
32. 30
Accessories
Working ‘in the field’ with clients gives us
valuable insights into what they need.
Which means great Testers.
And great accessories.
Test n Tag Kit
This has got the lot: label printer,
tough laminate labels, CCD
barcode scanner and carry case.
The printer lets you print on the
spot direct from your Tester. Add
the barcode and you get asset
identification, fast.
Part no: 308A915
33. 31
Temperature Module
Plug this directly into the Prime-
Test 200 and you’ll be able to
measure temperature in a range
of -50°C to 400°C in both
Fahrenheit and Centigrade.
Part no: 304A952
Test n Tag Printer Adaptor
Developed to allow the TnT kit to
work with the Primetest 300. Easy
to connect. Just plug the adaptor
into the printer and the printer’s
power supply means the printer is
Bluetooth ready.
Part no: 342A914
CCD Scanner
This lets you input and access
asset information quickly. This
ultra reliable scanner connects
direct with the Tester and is very
handy when the Tester’s uploaded
with asset details prior to testing.
Part no: 194A922
Bluetooth Scanner
A portable ID laser scanner with
bluetooth interface. Extremely
compact and lightweight, making
it ideal for mobile applications.
Powered by standard LR-3
(AAA) batteries.
Part no: 339A923
Braincells and Wand
Braincells use RFID technology
and are the new way to store
product info. Use the wand to
read Braincell fast and efficiently.
Braincell Part no: 288A953
Wand Part no: 288A910
CCD Scanner Adaptor
Plug this nifty unit into the end of
your scanner and you’re
Bluetooth ready, instantly. It lets
your CCD Scanner connect
wirelessly with the PrimeTest 300
and 350. Rechargeable batteries.
Part no: 339A960
PAT CheckBox
Designed to provide a safe,
simple and quick way to check a
PAT Tester’s calibration.
Checkbox can even check
Portable Appliance Testers
outside the Seaward range.
Part no: 227A910
Experts in what we do.
Test n Tag Wireless Printer
Adaptor
The new Bluetooth battery pack
adaptor not only adds Bluetooth
connectivity to the Test n Tag printer
but also provides power from an
internal rechargeable NiMH battery
pack. Plug the adaptor into a Test n
Tag printer for a totally wireless
solution.
Part no: 339A965
NEW
34. 32
Test n tag Printers
Professional solutions for
instant printing of test labels
Test n Tag gives PAT testing personnel a professional test labelling
system for immediate attachment to the equipment or its cable at the
touch of a button, automating the process and speeding test times.
The labels contain all key labelling information as recommended by the
IET. The Seaward system allows the user to incorporate their own logo
and company details. Direct printing of safety testing results and other
key details ensures complete accuracy and security of information and
eliminates the need for larger hand written or pre-printed labels. Labels
also have the facility to incorporate a barcode for appliance identification
and future testing, which can be read by a barcode reader.
■ Health & Safety Managers ■ PAT Service Providers
■ Maintenance Managers ■ Facility Managers
Clear label print
Fast labelling
Easy asset ID
Portable or benchtop
Direct results download
The professional’s choice
Ideal users:
35. 33
Test n Tag Printer
Ideal multi purpose label printer.
Labels are tamperproof – ensuring
the security and accuracy of your
test. Promote your company by
inserting the company logo, name
and contact details. Label includes
barcode, asset number, test date,
next test date, user name and test
status. There’s even a choice of
panel label or cable wrap label.
Immediate printing with easy to
install ink cartridge. Compatible
with Supernova Plus, Europa Plus
and (with Bluetooth adaptor) the
PrimeTest 300 and 350.
Part No: 308A924
Desk Test n Tag Printer
No more tearing, fading or
tampering with tags! The Desk Test
n Tag produces professional tags
10cm x 5cm. The Desk Test n Tag
is even supplied with a roll of tags
(approx. 2000 labels per roll),
printer ribbon and PC software
disk. Seaward compatible - use
the printer with the Supernova Plus
and Europa Plus.
Part No: 312A912
Test n Tag Elite
A handy, hard-wearing printer, with
Impact-modified polycarbonate
with fused oil and abrasion
resistant rubber overmould (six-foot
drop protection). Featuring smart
battery management to monitor
the battery for longer life and
performance. Labels are
tamperproof, waterproof and
professionally printed with your
logo and barcode. Compatible with
PrimeTest 350 and PrimeTest 300.
Part No: 339A970
Bluetooth Thermal Printer
Suitable for use with the
PrimeTest 300 and PrimeTest 350.
Print on the spot with Bluetooth
technology, transferring test
results direct from Tester to
printer. With no wires and fast,
clear printing this is ideal for any
test situation.
Part No: 339A930
Black on White
Black on Yellow
Orange
White
Yellow
Green
Red
Blue
Custom Appliance Number (where you require the numbers to be specific range)
Appliance Number (barcode labels come in any range)
Pass Labels
Test Code Labels
Bluetooth Thermal Labels
Test n Tag Elite Labels
342A912
308A914
312A912
312A951
312A956
312A962
312A961
312A957
194A323
194A307
91B038
194A308
339A310
339A041
100 aprox
100 aprox
1000
1000
1000
1000
1000
1000
250
250 (Min. Order 2000)
500
240
250
170
Number of LabelsPart NumberTest n Tag Label Cartridges
Number of LabelsPart NumberDesk Test n Tag Labels
Number of LabelsPart NumberTest n Tag Labels
Experts in what we do.
36. 34
Installation
Total Test Solutions.
Contents
36 - 37 Installation System
38 - 39 Probing Questions
40 - 41 Installation Guide
42 - 43 PowerPlus 1557
44 - 45 PowerTest 1557
46 - 47 IRT 1557
48 - 49 ERT 1557
50 PowerCheck 1557
51 Checkbox 17 Plus
52 - 53 Proving Units
54 - 55 PowerPlus PC Software
38. 36
Installation
SYSTEM
Technological advances are
tranforming the installation
testing industry.
Our Testers are at the forefront.
Today’s world moves at an unprecedented pace: things change every
day. Everything’s smarter, smaller and faster. This is good news for us,
and for you. It means we’re developing and manufacturing better
equipment and can incorporate technologies like PDA test
management. And we’re not confined to supplying test equipment.
We can now help your business or institution become more efficient
and effective. We call it PowerSolutions. This groundbreaking process
involves everything from choosing your installation Tester to following
up with calibration services and software. It streamlines your
processes, reduces costs, increases productivity and improves profits.
39. 37
Experts in what we do.
Test & Inspection Software
The Seaward Installation System. Less paper and less hassle.
Tester Print Certificates
Carry out your testing - the PowerPlus
1557 automatically saves measurements
to the built-in certificates. Also saves
work-in-progress for you to resume at
any time.
Once complete, print your inspection
results directly onto NAPIT, NICEIC, ECA
or BS7671 stationery and supply client
completed 17th Edition certificate.
Transfer a copy of the data into the
built-in certificates within the tester via
Bluetooth connectivity. Or enter manually
into PowerPlus 1557 using the
alphanumeric pad.
Transfer the data back onto the PC and
edit your recorded information back at
the office using the PowerPlus PC
software. Or edit it manually into the
tester using the alphanumeric keypad.
Create partially completed certificates
using Test and Inspection Software
PowerPlus PC.
40. 38
Probing questions
The most technologically
advanced 17th Edition
installation Tester. Ever.
Thanks to some great design thinking you can hold and read the 1557
range of Testers at the same time. No other installation Tester in the
marketplace has this feature. This amazing development comes as a
result of our team working in the field, testing installations with our
clients. This range of Testers weigh less than 1 kilogram each and fit
easily into the palm of your hand.
The leader of the range, the PowerPlus 1557 has 17th edition
certificates built in to save you time and money.
For insulation testing, the IRT 1557 is the ideal Tester. The Tester's
combination of integral probe and large backlit display mean you'll
never work in the dark again.
The ERT 1557 is ideal for any Earth Resistance Tester's tool kit. It has
a large on board memory and current clamp measurement facility.
The 1557 range offers comprehensive 16th and 17th Edition and
Part P testing. The range can complete a multitude of tests, including
Earth Continuity, Insulation (100V,250V,500V), Non Trip Loop
Impedance, Line Impedance, PSC, PFS, RCD Trip Current, RCD Trip
Time and Voltage / Frequency Measurement.
44. 42
PowerPlus 1557
Fixed Installation Tester with
built in Certificates
Traditional methods of inspection and testing require a multi-function
installation tester and some additional means of recording inspection
and test results. This can be a pad and paper or a PDA device
running some appropriate software. Why purchase a tester and a
PDA? Why carry around a tester and a PDA? A replica of the
inspection and test certificate is held directly on the PowerPlus 1557
allowing the user to record test and inspection data in the field. At
the end of the day, tester can be synchronised with the
accompanying PC software.
Professional PowerSolutions Package:
PowerSolutions is a way of approaching all aspects of electrical
testing. From Testers themselves to information management
software, through to label printers and more. You can buy each Tester
and its accessories separately or as an optional PowerSolutions
package which includes everything you need to run an efficient
installation testing business. Package includes:
■ PowerPlus 1557 unit + Quickstart Guide
■ PowerPlus PC software installer CD
■ USB Bluetooth adaptor
■ Cordless Probe
■ Test leads and crocodile clips
■ Rechargeable batteries and charger
■ Mains lead, carrying case and strap
■ Electricians ■ Electrical Contractors
17th Edition compliant
Fast & efficient
Comprehensive features
Built in certificates
High performance
Future proof
Ideal users:
17th
edition
compatible
42
45. 4343
SPECIFICATION
Earth Continuity
Test Current >200mA
Display Range 0.00ohms - 200ohms
Resolution 0.01ohms maximum
Test Lead Compensation Null lead resistance 0.00ohms -
10.00ohms
Live Circuit Detection Test inhibit if >30V detected
Insulation Resistance
Test Voltage 100V, 250V, 500V, 1000V
Display Range 0.00Mohms – 200Mohms
Resolution 0.01Mohms maximum
Live Circuit Detection Test inhibit if >30V detected
Loop/Line Impedance (Non-tripping & High Current)
Supply Voltage 195 – 253V/440V, 45Hz – 65Hz
Test Current 15mA (non tripping for RCD protected
circuits)
Test Current 3A (for non RCD protected circuits)
Display Range 0.01ohms - 2000ohms
Resolution 0.01ohms maximum
Loop Impedance Phase to Earth
Line Impedance Phase to Neutral/Phase to Phase
PFC/PSC Range 0 – 26kA
RCD Trip Time
Supply Voltage 195 – 253V, 45 – 65Hz
Test Currents 10, 30, 100, 300, 500mA
Trip Time Ranges 0ms – 2000ms at 1/2 I n
0ms – 300ms at I n general
0ms – 500ms at I n selective
0ms – 40ms at 5x I n
Auto Test Auto sequence for 1/2 I n, I n and 5x
I n at 0°and 180°
RCD Type General (G), Selective (S), Pulsed (A), AC (AC)
RCD Trip Current (Ramp Test)
Supply Voltage 195 – 253V, 45 – 65Hz
Test Currents 10, 30, 100, 300, 500mA
Ramp Current Range 1/2 I n to 1.1 I n
Voltage/Frequency Measurement
Display Range 0 – 440V
Resolution 1V
Frequency Measuring Range 45 – 65Hz
Phase Rotation
Displays RGB for correct phase sequence
ADDITIONAL INFORMATION
Compliance IEC 61010-1 300V CAT III, EN 61557
Dimensions 260 x 100 x 55
Weight 950g
Power Supply 6 x AA NiMH Rechargeable
Software
PowerPlus PC (375A910)
PowerPlus 1557 part no: 363A912
PowerPlus 1557 + PowerPlus PC part no: 363A910
PowerPlus1557 Professional PowerSolutions part no: 363A913
Experts in what we do.
46. PowerTest 1557
The only installation Tester
to feature an integral probe.
The professional’s choice.
Thanks to an integrated probe and some great design thinking, you can
hold and read the PowerTest 1557 at the same time, keeping your hands in
your line of sight and out of danger. The PowerTest 1557 is also fast, very
fast. This Tester will perform an earth loop, line loop, PFC and PSC test with
the push of one button in under 5 seconds! No other installation Tester lets
you do this. Weighing only 0.95kg, it fits into the palm of your hand and
carries out the following tests with a simple turn of the knob. Earth
Continuity, Insulation (100v, 250v, 500v), Non Trip Loop Impedence, Line
Impedence, PSC, PFC, RCD Trip line, RCD Trip current and
voltage/frequency measurement.
The PowerTest 1557 is supplied in a durable carrying case with a 2 year
warranty, 6 x AA alkaline batteries, test lead set, shrouded safety plugs,
shrouded safety test probes and a red cordless shrouded safety test probe.
Professional PowerSolutions Package:
PowerSolutions is a way of approaching all aspects of electrical
testing. From Testers themselves to information management
software, through to label printers and more. You can buy each Tester
and its accessories separately or as an optional PowerSolutions
package which includes everything you need to run an efficient
installation testing business. Package includes:
■ PowerTest 1557
■ PowerGuard Pro 2 software
or
■ PowerGuard Pro Mobile 2 software
■ Electrical Contractors ■ Training Institutions
■ Electrical Engineers ■ Power System Engineers
17th Edition compliant
Loop Test in 5 seconds
Auto RCD test
Reading at eye level
4 measurements from 1 test
Long battery life
Ideal users:
17th
edition
compatible
44
47. 45
TESTS
Earth Continuity
Test Current >200mA
Display Range 0.00ohm - 199ohm
Resolution 0.01ohm maximum
Test Lead Compensation Null lead resistance 0.00ohm -
10.00ohm
Live Circuit Detection Test inhibit if >30V detected
Insulation Resistance
Test Voltage 100V, 250V, 500V
Display Range 0.05Mohm – 199Mohm
Resolution 0.01Mohm maximum
Live Circuit Detection Test inhibit if >30V detected
Loop/Line Impedance
Supply Voltage 195 - 253V/340-440V,45Hz-65Hz
Test Current 15mA (non tripping for RCD protected
circuits)
Display Range 0.01ohm - 2000ohm
Resolution 0.01ohm maximum
Loop Impedance Phase to Earth
Line Impedance Phase to Neutral/Phase to Phase
PFC/PSC Range 0 – 26kA
RCD Trip Time
Supply Voltage 195 – 253V, 45 – 65Hz
Test Currents 10, 30, 100, 300, 500mA
Trip Time Ranges 0ms – 2000ms at 1/2 I n
0ms – 300ms at I n general
0ms – 500ms at I n selective
0ms – 40ms at 5x I n
Auto Test Auto sequence for 1/2 I n, I n and
5x I n at 0° and 180°
RCD Type General (G), Selective (S), Pulsed (A),
AC (AC)
RCD Trip Current (Ramp Test)
Supply Voltage 195 – 253V, 45 – 65Hz
Test Currents 10, 30, 100, 300, 500mA
Ramp Current Range 1/2 I n to 1.1 I n
Voltage/Frequency Measurement
Display Range 0 – 440V
Resolution 1V
Frequency Measuring Range 45 – 65Hz
ADDITIONAL INFORMATION
Compliance IEC 61010-1 300V CAT III, EN 61557
Weight & Dimensions 0.95kg / 26cm x 10cm x 5.5cm
Power Supply 6 x AA Alkaline Batteries (supplied)
6 x AA NiMH Rechargeable Batteries (optional)
ACCESSORIES
Hardware
PowerCheck 1557 (369A910)
Software
PowerGuard Pro 2 (355A910)
PowerGuard Pro Mobile 2 (355A920)
PowerTest 1557 part no: 328A910
PowerTest 1557 Professional PowerSolutions Pro part no: 371A910
PowerTest 1557 Professional PowerSolutions Mobile part no: 371A920
Experts in what we do.
48. 46
IRT 1557
Insulation Resistance
and Continuity Tester.
The Engineer’s ideal companion.
The IRT 1557 is a small, lightweight insulation resistance and continuity
Tester. Handheld, it’s a superb addition to any test engineer’s toolkit.
It performs measurements according to BS 7671, 16th/17th Edition
Wiring Regulations and Part P. Seaward’s unique integrated safety
probe puts the LCD and test probe in the user’s line of sight whilst
making measurements, no other Tester does this. IRT 1557 is fully
compliant with EN 61557 and IEC 61010-1 600v CAT lll. Automatic
discharge of capactive circuits, it gives you automatic warning of the
presence of hazardous voltages. It comes with an easy to use rotary
setting switch. The IRT 1557 offers a number of unique features,
including voltage measurements up to 1000AC or DC and a dual safety
rating. With incredible robustness the IRT 1557 provides all the tests
you need with a safe feel.
■ Electricians ■ Telecomms Engineers
■ Power System Engineers ■ Electrical Contractors
Handheld
Long battery life
16th/17th Edition compliant
Lightweight
Large backlit LCD
Continuous test mode
Ideal users:
46
49. 47
TESTS
Insulation Resistance
Display Range 0.001Mohm - 1999Mohm
Analogue Bar Graph 0ohm - infinity
Test Voltage 250v; 500v; 1000v
Nominal Current 1mA minimum per EN 61557
Audible/Visible Warning Inhibited if 30 V AC or DC at inputs
Continuity
Display Range 0.00ohm - 19.99ohm
Open Circuit Test Voltage 4V DC nominal
Test Current 200mA,
Audible and Visible warning Inhibited if 30 V AC or DC at inputs
Resistance
Display Range 0ohm - 2000ohm
Test Current 25uA nominal
Audible and Visible warning Inhibited if 30 V AC or DC at inputs
Voltage
Display Range 0V - 1000V DC/AC to 400Hz
Analog Bar Graph 0 - 1000V
Audible/Visible Warning 30 V AC or DC at inputs
ADDITIONAL INFORMATION
Safety rating IEC 61010-1, 600V CAT III
/ 1000V CAT II
Weight & Dimension 0.8kg / 26cm x 10cm x 5.5cm
Compliance EN 61557-1, -2, -4, -10
ACCESSORIES
Hardware
PowerCheck 1557 (369A910)
Software
PowerGuard Pro 2 (355A910)
PowerGuard Pro Mobile 2 (355A920)
IRT 1557 part no: 365A910
Experts in what we do.
50. 48
ERT 1557
A new high specification
Earth Resistance Tester.
Suitable for use on 110 v, 230 v and three phase electrical systems, this
special lightweight unit provides accurate Earth electrode resistance
measurement without disconnecting the electrode. It can also be used
to measure soil resistivity. Earth resistance measurement is carried out
using 2,3 and 4-wire method. The ERT has an internal memory for 500
test results which you can download to your conventional PC. Its user-
friendly features include a large rotary dial for test selection, large LCD
and simple push button test activation. The unit is supplied with four
Earth spikes and full test lead set. The ERT is one of the most
competitive Earth resistance Testers on the market.
■ Telecomms Engineers ■ Power Systems Engineers
■ Electricians ■ Electrical Contractors
Current clamp measurement
Battery powered
Store up to 500 records
Earth resistance measurement
Download to PC
2, 3, or 4 wire measurement
Ideal users:
17th
edition
compatible
48
51. 49
TESTS
Earth Resistance 2, 3 and 4 wire method
Display Range 0.00ohm - 50.0kohm
Measuring Frequency 125 Hz +/- 1 Hz
Measuring Current <20mA effective
Measuring Voltage <50V effective sine wave
Earth Resistance using current clamp
Display Range 0.0ohm - 2.00kohm
Measuring Frequency 125 Hz +/- 1 Hz
Measuring Current <20mA effective
Measuring Voltage <50V effective sine wave
Specific Earth resistance (p)
Display Range 0.00ohm – 1999kohm
Measuring Frequency 125 Hz +/- 1 Hz
Measuring Current <20mA effective
Measuring Voltage <50V effective sine wave
ADDITIONAL INFORMATION
Weight & Dimensions 0.8kg / 26cm x 10cm x 55mm
Memory 500 memory locations
Communication USB
Compliance EN 61557-1, -5, IEC61010-1, 300V CAT II
ACCESSORIES
ERT Current Clamp (278A912)
ERT 1557 part no: 362A910
Experts in what we do.
52. 50
Powercheck 1557
A complete PAT and Installation
instrument verification system.
■ Electricians ■ Service Engineers
■ Electrical Contractors
Rugged and robust
Confirm performance
Does not trip RCDs
Tests to BS 7671/EN 61557
NICEIC & IET compliant
Compatible with all testers
Ideal users:
The PowerCheck 1557 is a full instrument verification system in one
rugged, drop-proof enclosure. It tests to BS 7671, BS EN 61557 and
IET on-site Guide. It has full instrument verification against all relevant
standards and confirms performance between verifications (this is
information required by NICEIC, ELECSA, Corgi and others).
PowerCheck tests for Full Earth Continuity, Insulation Resistance, RCD
Trip Time, RCD Trip Current and Loop Verification.
53. 51
Experts in what we do.
SPECIFICATIONS
Earth Continuity Verification
Test current In >200mA indication
Test voltage 4V < Un > 24V indication
Test resistances 0.5ohm and 2ohm
Insulation Resistance Verification
Open circuit test voltage: 250V < Un < 375V indication
500V < Un < 750V indication
1000V < Un < 1500 indication
Test current In >1mA into 1000ohm/V
Max test current Ik <2mA
Test resistances 0.25Mohm, 0.5Mohm, 1.0Mohm
Earth Loop Verification
Test values Loop, Loop+1ohm, Loop+180ohm
RCD Verification
Trip current 10mA, 30mA, 100mA
Trip Times 20ms, 40ms, 500ms
Test current multiplier 1/2 n, I n and 5 I n verification
Voltage Verification
Test Voltage 240V AC rms test output
PAT FUNCTIONS
Earth continuity verification
Test resistances 0.2ohm and 2ohm
Insulation Resistance verification
Test resistances 500kohm, 1Mohm and 2Mohm
PE Conductor current
Test currents* 0.1mA, 0.25mA and 0.5mA
Flash Test current
Test currents* 0.5mA, 1mA and 1.5mA
ADDITIONAL INFORMATION
Power supply 230V AC ±10%
Weight & Dimensions 1kg / 21cm x 14.5cm 8.5cm
PowerCheck 1557 part no: 369A910
54. NICEIC & IET compliant
Continuity and insulation check
Loop and RCD test
17th Edition testing
Proving voltage
Compact
The CheckBox 17 Plus is a convenient Installation Instrument Check
Point. It is a versatile compact instrument which is designed to provide
a convenient check point for installation test instruments including Earth
Loop Testers, Insulation Continuity Testers and RCCB Testers. The
CheckBox 17 Plus provides a convenient and simple method of
confirming the functionality and accuracy of Installation Tester readings
as required for NICEIC inspections.
The CheckBox 17 Plus checks all Seaward and most other
manufacturer's installation test instruments.
SPECIFICATIONS
Tests Performed
Continuity check against precision 1ohm and 10ohm
Insulation check against precision 1Mohm
Earth Loop Impendance/Resistance check against 5ohm
RCD 60mS Trip Time and 30mA test current check
Voltage measurement check 45 — 85v a.c. specific value for each unit
ADDITIONAL INFORMATION
Power Mains 230V 50Hz
Weight & Dimensions 0.44kg / 18cm x 4.4cm x 9.6cm
Checkbox 17 Plus part number: 295A914
Checkbox 17 plus
Installation instrument Check Point.
52
55. 53
PROVING UNITS
Prove the voltage indicating ability
of potential indicators, test lamps
and multimeters.
The Seaward range of proving units are designed to suit a wide range of
customers and are in extensive use with power utilities, electrical
contractors and industrial engineers.
PPX AND PP1
PPX and PP1 provide a nominal 240 volt DC output at approximately
20 milliamps. These instruments are ideal for all types of voltage
indicators including LCD, LED and filament bulb type. Supplied with a
rugged carrying case with the PPX incorporating a belt clip. Simple and
convenient use in the field. Powered by 4 x AA alkaline cells.
PPX part number: 112A910
PP1 part number: 112A911
PP2
PP2 is a proving unit designed for mounting within vehicles. This
instrument is powered from the vehicle’s 12 volt supply and provides a
nominal 240 volt DC output ideal for all engineers working in the field
who require a readily available independent source of voltage.
Powered by 1 x PP3 alkaline cell.
PP2 part number: 112A912
PP24a
PP24a is a lightweight compact proving unit providing a nominal 240 volt
output at a nominal 2 milliamps. This device is ideal for a wide range of
voltage indicators including LED, LCD and multimeters. Powered by 1 x
PP3 alkaline cell.
PP24a part number: 112A919
PH3
PH3 is a highly portable, battery powered proving unit for proving high
voltage indicators, live line testers and digital potential indicators. This
proving unit produces a DC output voltage for confirming the operation
of voltage indicators before and after use. Designed for use with the
KD1E/19 and other instruments with flat contact electrodes.
PH3 Part Number: 112A913
Wherever safety depends on the ability of an instrument to indicate if a
circuit is live or isolated the Seaward proving units are an ideal independent
source of voltage to proof check the device before and after use.
Experts in what we do.
56. 54
Powerplus pc
Software
Produce 17th Edition Certificates faster.
The PowerPlus PC is a Test & Inspection software program designed
to work best in conjunction with the PowerPlus 1557 installation
tester. The PowerPlus PC software allows you to select from a range
of Installation Certificates, enter installation details including Certificate
number, and upload to the PowerPlus 1557 tester. Once testing is
complete, the information is transferred from the PowerPlus 1557 to
the PowerPlus PC software using Bluetooth transfer.
The PowerPlus PC intelligent data system will then populate the
correct fields with the test and inspection information from the
PowerPlus 1557 tester. A validation check will ensure the information
is consistent and complete. Incomplete or inconsistent information
will be highlighted.
The information can then be printed direct onto NICEIC, NAPIT and
ECA certificates. Alternatively, BS 7671 or Part-P forms can be
printed onto plain paper or emailed as a PDF. The Installation
information as well as individual Certificates is stored for use with
future test and inspections.
Part no: 375A910
■ Electricians ■ Electrical Contractors
Complete certificates faster
Upload/download to PP1557
Intelligent data system
Certificate validation
Direct input of certificate info
Save time & money
Ideal users:
Trybeforeyou buyDownload trial version atwww.seaward.co.uk
57. 55
Experts in what we do.
SPECIFICATIONS
The following Certificates are available in the program:
NICEIC
ECA
NAPIT
BS 7671
Domestic Electrical Installation
Domestic Periodic Inspection
Minor Electrical Installation Works Domestic
Minor Electrical Installation Works Industrial
Electrical Installation
Periodic Inspection for Electrical Installation
Domestic Visual Condition
ADDITIONAL INFORMATION
System Requirements
IBM Compatible PC
Processor Speed 500Mhz or higher
Microsoft Windows XP/Vista
32 bit operating systems
512MB RAM minimum
50MB available hard disk space
Colour monitor with 32 bit colour or greater video card
CD ROM drive
USB 2.0 Port
58. 56
High Voltage
Total Test Solutions.
Contents
58 - 59 High Voltage Safety
60 - 61 High Voltage Indicators
62 - 63 High Voltage Phasing Units
64 Halo Hook
65 Type L Plus
66 SD 300
67 AGL - 5
68 - 69 Professional Advice
60. High Voltage Safety
Twenty five years of the safest,
most reliable high voltage
equipment in the World.
Seaward’s experience in designing and manufacturing high voltage
test equipment is second to none, and is recognised as such around
the World. But that’s not all. We’re also acknowledged as a company
which understands how its customer companies work on the shop
floor. Ideally, our staff like to know as much about the job in hand as
the client. When the bottom line in safety is human life, there is simply
no room for error.
Seaward products are used globally and renowned for their reliability,
accuracy, and robust construction. Seaward’s expertise, after sales
service and calibration facilities are similarly highly prized worldwide.
Our High Voltage Test and Measurement range gives our customers
a comprehensive choice for power distributors, the industries which
support them, rail networks and the petrochemical industry.
Seaward’s range is fully compliant with international safety standards.
All our instruments are designed and manufactured in accordance
with the requirements of IEC 61243.
We manufacture ergonomically designed portable potential
indicators, capacitive voltage indicators, neon and digital phasing
units, insulator leakage detectors, current clamps, discharge units
and earthing and shorting equipment. Our products are available for
systems voltages up to 33kv.
Put simply, Seaward is the solution to your high voltage requirements.
58
62. HV Indicators
Portable, neon and digital potential
indicators for confirming voltage
on earthed neutral systems.
60
Neon Indication
Digital Readout
DIGITAL READOUT ACCESSORIES
UNIT FEATURES PART NO.
■ Proving unit for proof testing
high voltage indicators
■ High voltage output
1200V -1500DC
■ Self test facility
■ Avoids use of known supply
points or bulky test equipment
■ 90O
standard, 120O
on request
■ Suitable for use on vertical
type switchgear
■ 1.5m extension rod for use on
overhead lines
■ Suitable for use with KDIE/15D,
KDIE/33D, PR15D and PR33D
PH3
Bent End
Adaptors
Extension
Rod
112A913
141A900
(specify degree)
141A901
These instruments let you confirm the presence of voltage on
Earthed neutral electrical systems. They conform in design lengths
to the recommended creepage and safety standards. Each model
features high grade PVC tubing and incorporates encapsulated
resistor chains. There’s a PH3 proving unit for additional safety and
should be used before and after the voltage indicator’s used.
The digital reading instruments provide voltage measurements and
are supplied with detachable earth lead, battery charger and PH3
proving unit.
63. 61
DIGITAL READOUT SPECIFICATIONS
Features
■ Use as a potential indicator to determine presence of voltage
or as a voltmeter
■ Robust display housing
■ No switches
■ Provides direct reading of voltage measurements
■ Low battery indicator
■ Supplied with battery charger
■ Specifically designed carrying case for unit and accessories
Unit System Voltage* Features Part No.
*Earthed neutral system
15KV max
33KV max
KDIE/15D
KDIE/33D
Resolution-10V
Resolution-100V
109A910
109A911
NEON INDICATION SPECIFICATIONS
Features
■ Duplicate neon indicators within shock resistant sleeves
■ Permanently connected earth cable
■ Hand guards on all elements
■ Direct access to vertical or horizontal metal clad switch gear
■ UK Electricity Council Approval list G9
Unit System Voltage* Features Part No.
IKV-11.5KV
IKV-11.5KV
1.5KV-19KV
1.5KV-19KV
3KV-22KV
3KV-33KV
KDIE
KDIE/KAD
KDIE/19
KDIE/19S
KDIE/22
KDIE/33
KAD Audio Alarm
AC Voltage
113A916
113A915
113A914
113A913
113A912
113A911
Maximum System Voltage
Maximum Voltage to Earth
Threshold Voltage
Measuring Range
Resolution
Sensitivity
Circuit Current
(IEC 61234-2)
Dielectric Leakage Current
(IEC 61234-2)
Length (mm)
Diameter (mm)
Handle Length (mm)
Hand Guard Height (mm)
Contact Electrode Type
Neon Indication
KD1E
Indicator Type
KD1E/19 KD1E/19S KDE1/22 KDE1/33 KD1E/15D KD1E/33D
Digital Reading
11kV
6.6kV
300V
AC/DC
2.3mA nominal
6.6kV
7µA nominal
@13.8kV
330
25
105
23.5
Domed
19kV
11kV
300V
AC/DC
0.7mA nominal
11kV
11µA nominal
@ 22.8kV
330
25
105
23.5
Flat
19kV
11kV
300V
AC Only
0.9mA nominal
11kV
12µA nominal
@ 22.8kV
330
25
105
23.5
Flat
22kV
12.5kV
300V
AC/DC
3.5mA nominal
12.5kV
12µA nominal
@ 26.4kV
665
25
90
23.5
Domed
33kV
19kV
300V
AC/DC
1.1mA nominal
19kV
17µA nominal
@ 40kV
670
25
250
23.5
Flat
15kV
8.6kV
0.00kV-8.6kV
10V
AC/DC
0.5mA nominal
8.6kV
9µA nominal
@ 18V
600
25
235
23.5
Domed
33kV
19kV
0.00kV-19.0kV
100V
AC/DC
1.1mA nominal
19kV
17µA nominal
@ 140kV
600
25
235
23.5
Domed
▲
Indicator Type
▲
Extension Rods
▲
120o
1.5m Straight 90o
Maximum System Voltage
Dielectric Leakage Current
Length
Diameter
Contact Electrode Type
33kV
140µA nominal @ 40kV
150cm
2.5cm
“V” form
15kV
50µA nominal @ 18kV
78cm
2.5cm
Domed
33kV
130µA nominal @ 40kV
78cm
2.5cm
Domed
Experts in what we do.
64. HV Phasing units
Phase comparison equipment.
62
PR15D / PR33D ACCESSORIES (INCLUDED)
■ 1 x Proving unit
■ 1 x Battery charger
■ 2 x Overhead line extensions (1.5m)
■ All leads and instructions
■ Supplied with carrying case
■ Bent adaptors available for use with switch gear
The PR11 provides a means of phase comparison at the point of
paralleling two circuits, without the interposition of voltage
transformers or secondary wiring earthed neutral systems. A neon
type instrument, it is designed for use on earthed neutral systems up
to 11KV. The PR15D / PR33D units enable phase angle comparison
on Earthed neutral systems up to 15KV and 33KV respectively.
The digital reading instruments provide voltage measurements and
are supplied with detatchable Earth lead, allowing the digital leg to be
used as a voltage indicator, independently from the phasing leg.
PR11
PR15D/PR33D
65. 63
PR15D / PR33D SPECIFICATIONS
FEATURES
■ Provides a means of phase angle comparison and indication
of phase angle voltage at the point of intended paralleling of
two circuits on neutral Earthed systems. Both units are
digital instruments
■ Chart provides a means of checking phase angle difference
of circuits paralleled
■ Kit comprises two elements with resistor chains, one with
digital indicator and the second a phasing rod
UNIT VOLTAGE* FEATURES PART NO.
*Earthed neutral system
15kV max
33kV max
PR15D
PR33D
Resolution-10V
Resolution-100V
109A912
109A913
PR11 SPECIFICATIONS
FEATURES
■ For use on 1kV to 11.5kV systems
■ PVC hand guards on handles of elements
■ Neon indicator enclosed in shock resistant sleeve
■ Direct areas possible to all types of switch gear
■ Complies with UK Electricity Council Engineering
recommendation G9
Part No: 113A910
Maximum System Voltage
Maximum Voltage to Earth
Threshold Voltage
Measuring Range
Resolution
Sensitivity
Circuit Current
(IEC 61234-2)
Dielectric Leakage Current
(IEC 61234-2)
Length
Diameter
Handle Length
Hand Guard Height
Contact Electrode Type
Neon Indication
PR11
Indicator Type
PR15/D Digital Leg PR15/D Phasing Leg PR33D Digital Leg PR33D Phasing Leg
Digital Reading
11kV
6.6kV
300V
AC/DC
0.9mA nominal
@11.5kV
25µA nominal
@13.58kV
33cm
2.5cm
10.5cm
23.5cm
Domed
15kV
8.6kV
0.00kV - 8.6kV
10V
AC/DC
0.5mA nominal
@15kV
7µA nominal
@ 18kV
60cm
2.5cm
23.5cm
23.5cm
Domed
15kV
8.6kV
0.5mA nominal
@15kV
7µA nominal
@ 18kV
67cm
2.5cm
24cm
23.5cm
Domed
33kV
19kV
0.00kV - 19.0kV
100V
AC/DC
0.9mA nominal
@33kV
23µA nominal
@ 40kV
60cm
2.5cm
23.5cm
23.5cm
Domed
33kV
19kV
0.9mA nominal
@33kV
17µA nominal
@ 40kV
67cm
2.5cm
24cm
23.5cm
Domed
▲
Indicator Type
▲
* See page 67 for extension rod specifications
Experts in what we do.
66. 64
Halo hook
Ammeter for overhead powerlines.
A portable open core current transformer for accurately measuring
high voltage conductor current flow in a range of 0 to 2000 amps and
is suitable for use on system voltages of up to 36kV. The instrument is
applied using appropriate insulated operating poles, which quickly
and simply affix to the base of the instrument with a ‘universal spline’
attachment. Hooking the Halo around the conductor, the peak
reading of the rms current can be stored on a large clear LCD display
and retained until reset. Typical applications include spot load surveys,
phase balancing on primary and secondary circuits and monitoring of
current flow through high voltage fuses to establish their integrity. The
rugged design makes this instrument ideal for field use and is used by
power utilities throughout the world. Padded carrying case and full
instructions included.
SPECIFICATIONS
FEATURES
■ Lightweight 1.28 kg
■ Take spot checks quickly and easily
■ Moulded plastic head for conductors up to 5.8cm in diameter
■ For use on overhead or underground applications
■ Peak hold and track modes
■ Auto-ranging LCD display
■ True RMS reading
■ Display 3.5 digit LCD
■ Max. Amperes: 1999 Min. Amperes: 0.1
■ Display response time: 3 seconds to full scale
■ 3% off reading ± 1 digit accuracy:
■ Temperature Range: 0°F – 122°F (-18°C - 50°C)
■ Auto shut off
■ Operating humidity range: 80% RH at 120°F
■ Maximum voltage: 36kV AC (phase to phase)
■ Replaceable 9V alkaline battery- 40+ hours continuous operation
■ Membrane type, tactile response control panel
■ Dimensions core opening: 5.8cm x 9.4cm
Part No: 205A910
67. 65
Type L Plus
Large jaw clamp meter.
Specially designed for applications involving the measurement of
current flow through large conductors. With a Jaw size of 100mm
diameter the type L is ideal for measuring current flow through
porcelain fuse carriers in feeder pillars, large diameter conductors and
a variety of other applications. The instrument measures current using
precision Air Core current sensor technology and has been designed
to minimise the use of metallic components aiding safe working
practises. Measuring current up to 2000 amps, with both a Tracking
and a Store mode for operating to either monitor current on a
continually varying basis, or store the maximum reading when
operating in confined conditions. Used worldwide by power
authorities for aiding productive and safe working. Package includes
meter, carrying case, operating instructions.
SPECIFICATIONS
FEATURES
■ 3.5” digit LCD display with1.2cm high characters
■ 0 – 2000 amps measurement range
■ 50 – 600 volts AC 50 HZ voltage range
■ 10cm x 14cm internal Jaw dimensions
■ 0o
C - +40o
C operating temperature range
■ - 20o
C - +o
C storage range
■ 9 volt PP3 IEC umber 6LF22 battery
■ 3% accuracy of full scale on all ranges for a conductor
positioned at the centre of the jaws
Part No: 275A910
Experts in what we do.
68. 66
SD 300
Safe discharge of
stored electrical energy.
There is nothing quite like the SD 300 available in the current market.
Specifically designed to enable you to discharge stored energy safely
from large capacitors. These capacitors store potentially lethal
amounts of energy and must be safely discharged before service or
maintenance is carried out. The common, unauthorised practice is to
discharge this energy with screwdrivers or wires prior to maintenance,
test or repair work. This can cause uncontrolled sparking and is
extremely dangerous. It can also damage capacitors. The SD 300 has
a unique failsafe two handed push-button operation which initiates
and maintains the discharge. It ensures that the operator never
comes into contact with the live circuit. It’s a safety must.
SPECIFICATIONS
FEATURES
■ Unique failsafe design
■ Electrical isolation between probes
■ Two handed operation
■ Self test facility
■ Rugged drop proof enclosure
■ 1000V maximum discharge voltage
■ 1200µF maximum discharge capacitance
■ 30s nominal discharge time @ 1000V/1200uF
■ Safety Interlock discharge inhibited if >30V AC
between test probes
■ Centre-zero panel meters and LED indicators
■ 33.9cm x 29.5cm x 15.2cm
■ Only 4kg
■ IP66 IP rating
■ UL listed
Part No: 357A910
■ Power Factor Connection Capacitors
■ DC Drive Capacitors
Applications:
69. 67
Experts in what we do.
■ Offshore Maintenance ■ ROV Maintenance
■ AGL Maintenance ■ AGL Manufacturing
Rated at 5kV
Compliant with all standards
Carry case included
High visibility indicators
Proving unit included
Compact and portable
Ideal users:
The Seaward AGL-5 is a two pole voltage detector designed
specifically for use with airfield ground lighting systems. The instrument
indicates the presence of voltages greater than 50V AC and is ideal for
proving dead on AGL systems up to 5000V. The unit is totally
encapsulated in a high impact rugged enclosure and is IP64 rated.
The ultra-bright high intensity red LED indicators and a polarizing filter
making it clearly visible in all working environments.
The AGL-5 is supplied complete with a proving unit for proof testing
before and after use and a protective carry case.
SPECIFICATIONS
AGL-5 Two Pole Voltage Detector
Working Voltage 5000V DC max
Threshold Voltage 50V AC/70V DC
Circuit Current <3.5mA
Indicator 2 ultra-bright red LED
Compliance IEC 61243-2 and IEC 61243-3
PH3-LLT Proving Unit
Output Voltage 500V DC nominal
Output current 0.45mA into 2kohm
Two non-touchable terminals
Neon ‘active’ indicator
Compliance BS EN 61010-1
Part No: 374A910
N
E
W
AGL-5
Airfield Ground Lighting
Voltage Detector
70. 68
Professional advice
Service which keeps you
ahead of the competition.
JumpStart
Sometimes it’s important to get a bit of guidance when you’re setting
up a piece of Seaward equipment. JumpStart’s a new, one-on-one
service that’s designed to get the max from your PAT Testing
equipment. A dedicated, experienced professional will visit your site,
discuss what you need with you and then set up and configure the
instruments, software and establish what training’s needed. You’ll
know everything about the kit by the time we leave.
For full details regarding JumpStart, contact sales@seaward.co.uk or
telephone +44 (0) 191 586 3511
Testers, Accessories and Software are only part of our safety testing
business. We’re here to help you as partners. As some of you
appreciate, we spend a huge amount of time on your shop floors and
working environments.
Calibration
As you know, without calibration, instruments can’t perform the tasks
they’re supposed to do. We supply a quick calibration service at our
Head Office so you can get this sorted out properly. This service is
available for Multimeters, Clampmeters, PATs, 16th/17th Edition
Testers, EMC and High Voltage Testers, regardless of who
manufactured it.
All calibration is carried out to the highest standards and is
guaranteed for accuracy as we are UKAS accredited.
71. 69
Service
Seaward Service Department supports the standard 12 month
product warranty which is offered across our product range. In
addition to both in and out of warranty repair, service and
calibration of the full range of Seaward Group test equipment we
can also accommodate the repair and service of other brands of
test equipment. Extended product warranties are available, and
service requirements can be booked online at
www.seaward.co.uk, email service@seaward.co.uk,
telephone +44 (0) 191 587 8737 or fax +44 (0) 191 5184666.
Training
If you’re serious about Safety Testing, you should seriously consider
our Total Solutions package. In a nutshell, this means we don’t just
make the best equipment, we also supply certified training courses
for those who use our products. All our courses are designed to
provide faster testing techniques, best practice and the effective use
of ancillary equipment. When you’ve completed our courses, you’ll
be accredited by Seaward. We also hold courses on our prestigious
software packages which help you fully master Test Record
Management.
Experts in what we do.
72. 2
Seaward, Bracken Hill, South West Industrial Estate,
Peterlee, County Durham, SR8 2SW United Kingdom
Tel: +44 (0) 191 586 3511 Fax: +44 (0) 191 586 0227
Email: sales@seaward.co.uk Web: www.seaward.co.uk
Seaward, Clare, Rigel Medical,
Cropico, Seaward Group USA
are all part of the Seaward Group
Part No. 998A221 - Rev 4