Sandpiper AODD Pump Operating Principle
•
1 like•748 views
SandPiper - AODD Pump Operating Principle a typical Air Operated Double Diaphragm Pump (AODD Pump) Chambers are alternatively filled and emptied by drawing fluid in through a common suction manifold and out through common discharge manifold. For more information visit: http://www.idexindia.in/sandpiper-pump/
More Related Content
What's hot
What's hot (20)
Similar to Sandpiper AODD Pump Operating Principle
Similar to Sandpiper AODD Pump Operating Principle (20)
Recently uploaded
Recently uploaded (20)
Sandpiper AODD Pump Operating Principle
- 1. IDEX Proprietary & Confidential
- 2. IDEX Proprietary & Confidential Industry Week’s Best Plant award 2012 Warren Rupp, Inc. Mansfield, Ohio Plant, Facility built in 1975
- 3. IDEX Proprietary & Confidential
- 4. IDEX Proprietary & Confidential Pump Chambers are alternatively filled and emptied by drawing fluid in through a common suction manifold and out through common discharge manifold. The diaphragms in each chamber are linked by a common shaft, so that they move backwards and forwards in unison. Compressed air is directed by the air valve alternatively, behind each diaphragm, to power discharge strokes. Pump speed, fluid output and pressure (or head) is controlled by increasing or decreasing the flow of compressed air to the pump.
- 5. IDEX Proprietary & Confidential Suction Cycle: Fluid is drawn into the Suction Manifold at by the suction stroke of the diaphragm and into Chamber. This ‘opens’ the ball valve to allow liquid to enter the chamber. Ball valve is drawn into the Valve Seat and ‘closed’ by the diaphragm suction stroke.
- 6. IDEX Proprietary & Confidential Discharge Cycle: In Chamber, air has been applied to the rear of the diaphragm to force out the Fluid in the chamber through the ball valve to the Discharge Manifold. The discharge stroke ‘closes’ the ball valve to prevent further liquid entering the chamber. This cycle is repeated to provide a continuous flow to the Discharge Manifold at outlet.
- 7. IDEX Proprietary & Confidential Air Operated: • No need of electrical drive. • Easy to buy, use and install. Self Priming: • No need of priming. • Unloading from drums/ sumps etc. • Replaces the traditional drum pumps • Example: Acid and solvents (raw material) unloading in pharma and refineries
- 8. IDEX Proprietary & Confidential Seal-less Pumps: • Zero Leakage • Less maintenance compared to sealed pumps • Ideal for corrosive, abrasive, hazardous liquids handling • Example: Sulphuric Acid, Ink, Solvents Can be stalled indefinitely: • Can restart automatically when pressure is released. • Ideal for filling applications • Example: Oil filling lines
- 9. IDEX Proprietary & Confidential Can run at wide variety of flows: • Through air-regulator • No need of VFD • Example: Unloading applications Can run dry without damage: • No internal pump damage • Any other seal pump will have seal failures • Any motorized pump will have motor damage • In case of PC pump, the whole pump failure • Example: Viscous liquids/ slurries prone to choking like fruit pulp
- 10. IDEX Proprietary & Confidential Low Shear: • Low velocity and absence of tight clearances => low shear • Low product degradation and agitation • Example: Paint, Emulsions, Latex Can handle solids: • No tight clearances • No mechanical seals • Example: Ceramic, waste-water treatment
- 11. IDEX Proprietary & Confidential Naturally Intrinsically safe -ATEX Approved models: • Safe for using in hazardous environment Can operate Submerged: • Air supply and exhaust hose will extend to pump submerged below • Used when lifting from tank below is not practical
- 12. IDEX Proprietary & Confidential Compact and Portable: • Not anchored to a foundation • Easy to move • No alignment issues • Light weight • One pump can be used for many intermittent services • Example: Sludge removal from tanks
- 13. IDEX Proprietary & Confidential Paints Pharmaceutical Ceramics Chemicals & Petrochemicals
- 14. IDEX Proprietary & Confidential Food Processing Water & Waste Water Construction Pulp/Paper
- 15. IDEX Proprietary & Confidential Marine Mining Automotives Oil & Gas
- 16. IDEX Proprietary & Confidential Ceramics Slip and glaze, Filter Presses, Abrasive Fluids, and Sanitary Products Chemical & Petrochemical Oil, Sludge, Chemicals, Acids, Solvents, Hydrocarbons, Polymers, Resins, Dyes, Effluent, Additives Paints and Coatings Paints, Inks, Dyes, Resins, Adhesives Food and Beverage Beverages, Dairy products, Purees, Juices, Preserves Waste Water Chemical and General Waste
- 17. IDEX Proprietary & Confidential http://www.idexindia.in/sandpiper-pump/
- 18. IDEX Proprietary & Confidential Savli, Vadodara IDEX Fluid & Metering – Manufacturing facility SandPiper AODD Pumps in India
- 19. IDEX Proprietary & Confidential IFMT - AODD Value Stream
- 20. IDEX Proprietary & Confidential Our Contacts Manufacturing Facilities: SANDPIPER Pump 800 North Main Street Mansfield, Ohio 44902 USA Tel: +1 (419) 524-8388 Fax: +1 (419) 522-786 IDEX Fluid & Metering Pvt. Ltd. Survey No. 256, GIDC Manjusar, Savli Near Bombardier Circle, Distr. Vadodara 391770, India Tel: +91-2667-662-001 Sales & Support SandPiper Pump - Mumbai S 14, First floor Solitaire Corporate Park, 167, Guru Hargovindji Marg, Chakala, Andheri (East), Mumbai 400 093 Tel: +91-22 6643-5552/5555 Email: info.fmt@idexcorp.com SandPiper Pump - Delhi 4th flr, Office No. 801 Statesman House, Barakhamba Road Connaught Place New Delhi 110001 Tel: +91-11-3044-6482 Email: info.fmt@idexcorp.com SandPiper Pump - Chennai The Executive Centre, Tamarai Tech Park Level 5, S.P.Plot No.16-19 & 20-A, Thiru Vi Ka Industrial Estate, Inner Ring Road, Guindy, Chennai 600032, India Tel: +91 44 6693 6630 Email: info.fmt@idexcorp.com