Steam Turbines presentation on Types, Classification and governing Equations
•
63 likes•10,225 views
This document provides an introductory guide to steam turbines for chemical engineers. It discusses impulse versus reaction turbine designs, provides videos and websites as additional resources on steam turbines, and lists Excel tools for calculating steam turbine parameters. The document concludes by listing the author's professional experience in process engineering and academic background, and suggests other topics related to process equipment that may be of interest.
Report
Share
Report
Share
Download to read offline
Recommended
Storage presentation on Types and governing Equations.
Based on my 8 years of experience in Oil & Gas industry I can claim that you can find here most of what you need to know about Storage Tanks. This is an introduction to understand more about their:-
-Types
-Basic Principles and equations
-P&ID Symbols
-Worked Example
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
Heat Exchangers presentation on Types, Classification and governing Equations
You can find here all that you need to know about Heat Exchangers. This is an introduction to understand more about their:-
-Types.
-Governing Equations.
-Worked Example.
-Excel Sheets for Calculation.
You can find also more at:
http://hassanelbanhawi.com/staticequipment/heatexchangers/
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
Thank you.
Pumps presentation on Types, Classification and governing Equations
Based on my 8 years of experience in Oil & Gas industry I can claim that you can find here All what you need to know about Pumps. This is an introduction to understand more about their:-
-Types
-Selection
-Basic Principles and equations
-Pump System
-Pump Curve
-Worked Example
-Very useful Excel sheets for pumps calculation
You can find also more at:
http://hassanelbanhawi.com/rotatingequipment/pumps/
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
Thank you.
Compressors presentation on Types, Classification and governing Equations
Based on my 8 years of experience in Oil & Gas industry I can claim that you can find here All what you need to know about Compressors. This is an introduction to understand more about their:-
-Types.
-Selection.
-Performance.
-Worked Example.
-Excel Sheets for Calculation.
You can find also more at:
http://hassanelbanhawi.com/rotatingequipment/compressors/
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
Thank you.
Distillation Towers (Columns) presentation on Types, governing Equations and ...
Based on my 8 years of experience in Oil & Gas industry I can claim that you can find here All what you need to know about Columns. This is an introduction to understand more about their:-
-Types
-Basic Principles and equations
-Distillation System
-P&ID Symbols
-Worked Example
You can find also more at:
http://hassanelbanhawi.com/staticequipment/columns/
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
Thank you.
Valves presentation on Types and Classification
Based on my 8 years of experience in Oil & Gas industry I can claim that you can find here All what you need to know about Valves. This is an introduction to understand more about their:-
- Classification.
- Selection
- Most common Types.
You can find also more at:
http://hassanelbanhawi.com/staticequipment/valves
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
Thank you.
Gas Turbines presentation on Types, Classification and governing Equations
Based on my 8 years of experience in Oil & Gas industry I can claim that you can find here All what you need to know about Gas Turbines. This is an introduction to understand more about their:-
-Types
-Basic Principles and equations
-Components
-Worked Example
-Very useful tools
You can find also more at:
http://hassanelbanhawi.com/rotatingequipment/gasturbines/
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
Thank you.
Line Sizing presentation on Types and governing Equations.
Based on my 8 years of experience in Oil & Gas industry I can claim that you can find here All what you need to know about Pipeline Sizing. This is an introduction to understand more about their:-
-The basic idea.
-Simplified method for calculations.
-Equations.
-Data Tables.
-Worked Examples.
-Excel Sheets for Calculation.
-Links to other topics which may be interesting.
You can find also more at:
http://hassanelbanhawi.com/staticequipment/linesizing/
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
Thank you.
Recommended
Storage presentation on Types and governing Equations.
Based on my 8 years of experience in Oil & Gas industry I can claim that you can find here most of what you need to know about Storage Tanks. This is an introduction to understand more about their:-
-Types
-Basic Principles and equations
-P&ID Symbols
-Worked Example
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
Heat Exchangers presentation on Types, Classification and governing Equations
You can find here all that you need to know about Heat Exchangers. This is an introduction to understand more about their:-
-Types.
-Governing Equations.
-Worked Example.
-Excel Sheets for Calculation.
You can find also more at:
http://hassanelbanhawi.com/staticequipment/heatexchangers/
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
Thank you.
Pumps presentation on Types, Classification and governing Equations
Based on my 8 years of experience in Oil & Gas industry I can claim that you can find here All what you need to know about Pumps. This is an introduction to understand more about their:-
-Types
-Selection
-Basic Principles and equations
-Pump System
-Pump Curve
-Worked Example
-Very useful Excel sheets for pumps calculation
You can find also more at:
http://hassanelbanhawi.com/rotatingequipment/pumps/
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
Thank you.
Compressors presentation on Types, Classification and governing Equations
Based on my 8 years of experience in Oil & Gas industry I can claim that you can find here All what you need to know about Compressors. This is an introduction to understand more about their:-
-Types.
-Selection.
-Performance.
-Worked Example.
-Excel Sheets for Calculation.
You can find also more at:
http://hassanelbanhawi.com/rotatingequipment/compressors/
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
Thank you.
Distillation Towers (Columns) presentation on Types, governing Equations and ...
Based on my 8 years of experience in Oil & Gas industry I can claim that you can find here All what you need to know about Columns. This is an introduction to understand more about their:-
-Types
-Basic Principles and equations
-Distillation System
-P&ID Symbols
-Worked Example
You can find also more at:
http://hassanelbanhawi.com/staticequipment/columns/
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
Thank you.
Valves presentation on Types and Classification
Based on my 8 years of experience in Oil & Gas industry I can claim that you can find here All what you need to know about Valves. This is an introduction to understand more about their:-
- Classification.
- Selection
- Most common Types.
You can find also more at:
http://hassanelbanhawi.com/staticequipment/valves
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
Thank you.
Gas Turbines presentation on Types, Classification and governing Equations
Based on my 8 years of experience in Oil & Gas industry I can claim that you can find here All what you need to know about Gas Turbines. This is an introduction to understand more about their:-
-Types
-Basic Principles and equations
-Components
-Worked Example
-Very useful tools
You can find also more at:
http://hassanelbanhawi.com/rotatingequipment/gasturbines/
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
Thank you.
Line Sizing presentation on Types and governing Equations.
Based on my 8 years of experience in Oil & Gas industry I can claim that you can find here All what you need to know about Pipeline Sizing. This is an introduction to understand more about their:-
-The basic idea.
-Simplified method for calculations.
-Equations.
-Data Tables.
-Worked Examples.
-Excel Sheets for Calculation.
-Links to other topics which may be interesting.
You can find also more at:
http://hassanelbanhawi.com/staticequipment/linesizing/
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
Thank you.
Fired Equipment presentation on Types, Classification and governing Equations...
Based on my 8 years of experience in Oil & Gas industry I can claim that you can find here All what you need to know about Fired Equipment. This is an introduction to understand more about their:-
-Types
-Basic Principles and equations
-Worked Example
You can find also more at:
http://hassanelbanhawi.com/staticequipment/firedequipment/
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
Thank you.
Process control presentation on Final Control Element, components, types, val...
Based on my 8 years of experience in Oil & Gas industry I'm trying here to introduce you to the most of what you may need to know about Process Control as a chemical engineer. This is an introduction to understand more about :-
-Final Control Element
-Components
- Types
- Sizing Equations
This is 4 of 4 presentation on this topic.
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
VALTEK (1995) Control Valve Sizing and Selection Manual.
Thank you.
Aspen Plus - Intermediate Process Modeling (3 of 3) (Slideshare)
LINK:
https://www.chemicalengineeringguy.com/courses/aspen-plus-intermediate-course/
The INTERMEDIATE Aspen Plus Course will show you how to model and simulate more complex Processes
Analysis of Unit Operation will help you in order to simulate more complex chemical processes, as well as to analyse and optimize existing ones.
You will learn about:
- Better Flowsheet manipulation
- Hierarchy, Flowsheeting, Sub-flowsheet creation
- Logical Operators / Manipulators
- Understand Property Method Selection and its effects on simulation results
- Study of more rigorous unit operations
- Model Analysis Tools such as sensitivity and optimization
- Reporting Relevant Results Plot relevant data for Heaters, Columns ,Reactors, Pumps
- Temperature Profiles, Concentration Profile, Pump Curves, Heat Curves, etc…
- Up to 3 Case Studies (in-depth analysis)
All theory is backed up by more than 30 Practical Workshops!
At the end of the course you will be able to setup more complex processes, increase your simulation and flow sheeting techniques, run it and debugging, get relevant results and make a deeper analysis of the process for further optimization.
Uniform heat transfer in fired heaters
Fired heaters are used for heating hydrocarbons fluids in the refineries and petrochemical plants. They are used for high temperature heat transfer. In most fired heaters, we are burning fuel gas as source of heat . There are many heaters in the world where liquid fuel is also burnt in the fired heaters to provide the energy, but their number is decreasing due to tighter pollution laws. Heaters that are processing hydrocarbons services are prone to coking and cracking depending upon the nature of the hydrocarbons being processed. Typically heaters may run length of anywhere from 3 months for coking service to 6 years for different services. Heater designers and operators are always faced with the challenge of providing uniform heat transfer to all the tubes. Engineers use equations that assume uniform heat transfer to heater tubes When designing fired heaters. However, in reality, most fired heaters do not experience uniform heat transfer, and as a result, hot spots develop on the tubes. These hot spots cause coking inside the tubes which requires the heater be shutdown periodically to remove the coke and clean the tubes. Any shutdown to clean the tubes in a fired heater causes a substantial production loss. The owners want to extend the run length of fired heaters. Furnace Improvements has developed a new patented firing technology that provides uniform heat transfer to heater tubes. This technology can be applied to most fired heaters. Our patented technology reorients the burners at a slight angle away from the tubes. We are able to direct the hottest part of the flames and flue gases away from the tubes without affecting the heat transfer in any way. FIS has installed this in 5 heaters ranging from 14 MMBtu/hr. to 280 MMBtu/hr. The clients are experiencing significant reduction in tube metal temperatures. This is translating into lower coking rates and higher tube life. We have been able to increase the capacity of the heaters in most of the cases. In one of the case study that has been presented in this heater, the heater duty was increased from 14 MMBtu/hr. to 21 MMBtu/hr. Inclined firing improves the heat transfer to the tubes and makes in uniform.
Catalytic Reforming: Catalyst, Process Technology and Operations Overview
Catalytic Reforming: Catalyst, Process Technology and Operations Overview
Contents
Fundamentals of Catalytic Reforming
Objective
Reaction Chemistry and Mechanisms
Desirable and Undesirable Reactions
Process Variables
Reactor Temperature
Reactor Pressure
Space Velocity
Hydrogen / Hydrocarbon Ratio
Feedstock
Yield Charts
Reforming Process Flow Sheets (PFDs)
Fixed Bed reforming
Semi Regenerative Reforming
(CCR) Continuous Catalytic Regenerative Reforming
Octanizing
Dualforming
RZ Platforming
Reforming catalyst
Catalyst Types
Catalyst Poisons
Catalyst Distribution
Catalyst Sampling
Catalyst Regeneration
Catalytic Reforming Economics Comparison
Key Energy and Environmental Facts
Conclusions
Centrifugal Compressors
Centrifugal Compressors
SECTION ONE - ANTI-SURGE PROTECTION AND THROUGHPUT REGULATION
0 INTRODUCTION
1 SCOPE
2 MACHINE CHARACTERISTICS
2.1 Characteristics of a Single Compressor Stage
2.2 Characteristic of a Multiple Stage Having More
Than One Impeller
2.3 Use of Compressor Characteristics in Throughput
Regulation Schemes
3 MECHANISM AND EFFECTS OF SURGE
3.1 Basic Flow Instabilities
3.2 Occurrence of Surge
3.3 Intensity of Surge
3.4 Effects of Surge
3.5 Avoidance of Surge
3.6 Recovery from Surge
4 CONTROL SCHEMES INCLUDING SURGE PROTECTION
4.1 Output Control
4.2 Surge Protection
4.3 Surge Detection and Recovery
5 DYNAMIC CONSIDERATIONS
5.1 Interaction
5.2 Speed of Response of Antisurge Control System
6 SYSTEM EQUIPMENT SPECIFICATIONS
6.1 The Antisurge Control Valve
6.2 Non-return Valve
6.3 Pressure and flow measurement
6.4 Signal transmission
6.5 Controllers
7 TESTING
7.1 Determination of the Surge Line
7.2 Records
8 INLET GUIDE VANE UNITS
8.1 Application
8.2 Effect on Power Consumption of the Compressor
8.3 Effect of Gas Conditions, Properties and Contaminants
8.4 Aerodynamic Considerations
8.5 Control System Linearity
8.6 Actuator Specification
8.7 Avoidance of Surge
8.8 Features of Link Mechanisms
8.9 Limit Stops and Shear Links
APPENDICES
A LIST OF SYMBOLS AND PREFERRED UNITS
B WORKED EXAMPLE 1 COMPRESSOR WITH VARIABLE INLET PRESSURE AND VARIABLE GAS COMPOSITION
C WORKED EXAMPLE 2 A CONSTANT SPEED ~ STAGE COMPRESSOR WITH INTER-COOLING
D WORKED EXAMPLE 3 DYNAMIC RESPONSE OF THE ANTISURGE PROTECTION SYSTEM FOR A SERVICE AIR COMPRESSOR RUNNING AT CONSTANT SPEED
E EXAMPLE OF INLET GUIDE VANE REGULATION
FIGURES
2.1 TYPICAL COMPRESSOR STAGE CHARACTERISTIC PLOTTED WITH FLOW AT DISCHARGE CONDITIONS
2.2 TYPICAL COMPRESSOR STAGE CHARACTERISTIC PLOTTED WITH FLOW AT INLET CONDITIONS
2.3 PERFORMANCE CHARACTERISTICS OF A COMPRESSOR STAGE AT VARYING SPEEDS
2.4 SYSTEM WORKING POINT DEFINED BY INTERSECTION OF PROCESS AND COMPRESSOR CHARACTERISTICS
2.5 DISCHARGE THROTTLE REGULATION
2.6 BYPASS REGULATION
2.7 INLET THROTTLE REGULATION
2.8 INLET GUIDE VANE REGULATION
2.9 VARIABLE SPEED REGULATION
3.1 GAS PULSATION LEVELS FOR A CENTRIFUGAL COMPRESSOR
3.2 REPRESENTATION OF CYCLIC FLOW DURING SURGE OF LONG PERIOD
3.3 TYPICAL WAVEFORM OF DISCHARGE PRESSURE DURING SURGE
3.4 MULTIPLE SURGE LINE FOR A MULTISTAGE CENTRIFUGAL COMPRESSOR
3.5 TYPICAL MULTIPLE SURGE LINES FOR SINGLE STAGE AXIAL-FLOW COMPRESSOR
4.1 GENERAL SCHEMATIC FOR COMPRESSORS OPERATING IN PARALLEL TO FEED MULTIPLE USER PLANTS
4.2 ILLUSTRATION OF SAFETY MARGIN BETWEEN SURGE POINT AND SURGE PROTECTION POINT AT WHICH ANTISURGE SYSTEM IS ACTIVATED
4.3 ANTISURGE SYSTEM FOR COMPRESSOR WITH FLAT PERFO ..........
Process Control Presentation on control modes, Proportional, Integral, Deriva...
Based on my 8 years of experience in Oil & Gas industry I'm trying here to introduce you to the most of what you may need to know about Process Control as a chemical engineer. This is an introduction to understand more about :-
Introduction
Process Attributes
Control Modes
Control Modes comparison
Control Mode Selection
System Order
System Response
Control Tuning
Typical Tuning Values
References
This is 3 of 4 presentations on this topic.
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
A Real-Time Approach to Process Control by William Y. Svrcek.
Thank you.
Process Control Presentation on Sensing devices as temperature Sensors, press...
Based on my 8 years of experience in Oil & Gas industry I'm trying here to introduce you to the most of what you may need to know about Process Control as a chemical engineer. This is an introduction to understand more about :-
-Control Concepts
-Feedback Control Loop
-Sensors
-Signal Transmitters
-Controllers
-Final Control Element
-Control Loop Modes
This is 2 of 4 presentations on this topic.
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
Thank you.
Steam Reforming - Catalyst Loading
OBJECTIVES
Best practices
Sock Loading
Unidense
Pressure Drop Measurement
Common Problems
Pressure Relief valve sizing and design
Safety is the most important factor in designing a process system. Some undesired conditions might happen leading to damage in a system. Control systems might be installed to prevent such conditions, but a second safety device is also needed. One kind of safety device which is commonly used in the processing industry is the relief valve. A relief valve is a type of valve to control or limit the pressure in a system by allowing the pressurised fluid to flow out from the system.
Electric Motors presentation on Types and Classification
Based on my 8 years of experience in Oil & Gas industry I can claim that you can find here All what you need to know about Electric Motors. This is an introduction to understand more about their:-
- Theory.
- Governing Equations.
- Types.
- Nameplate Data.
You can find also more at:
http://hassanelbanhawi.com/rotatingequipment/Electricmotors
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
Thank you.
More Related Content
What's hot
Fired Equipment presentation on Types, Classification and governing Equations...
Based on my 8 years of experience in Oil & Gas industry I can claim that you can find here All what you need to know about Fired Equipment. This is an introduction to understand more about their:-
-Types
-Basic Principles and equations
-Worked Example
You can find also more at:
http://hassanelbanhawi.com/staticequipment/firedequipment/
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
Thank you.
Process control presentation on Final Control Element, components, types, val...
Based on my 8 years of experience in Oil & Gas industry I'm trying here to introduce you to the most of what you may need to know about Process Control as a chemical engineer. This is an introduction to understand more about :-
-Final Control Element
-Components
- Types
- Sizing Equations
This is 4 of 4 presentation on this topic.
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
VALTEK (1995) Control Valve Sizing and Selection Manual.
Thank you.
Aspen Plus - Intermediate Process Modeling (3 of 3) (Slideshare)
LINK:
https://www.chemicalengineeringguy.com/courses/aspen-plus-intermediate-course/
The INTERMEDIATE Aspen Plus Course will show you how to model and simulate more complex Processes
Analysis of Unit Operation will help you in order to simulate more complex chemical processes, as well as to analyse and optimize existing ones.
You will learn about:
- Better Flowsheet manipulation
- Hierarchy, Flowsheeting, Sub-flowsheet creation
- Logical Operators / Manipulators
- Understand Property Method Selection and its effects on simulation results
- Study of more rigorous unit operations
- Model Analysis Tools such as sensitivity and optimization
- Reporting Relevant Results Plot relevant data for Heaters, Columns ,Reactors, Pumps
- Temperature Profiles, Concentration Profile, Pump Curves, Heat Curves, etc…
- Up to 3 Case Studies (in-depth analysis)
All theory is backed up by more than 30 Practical Workshops!
At the end of the course you will be able to setup more complex processes, increase your simulation and flow sheeting techniques, run it and debugging, get relevant results and make a deeper analysis of the process for further optimization.
Uniform heat transfer in fired heaters
Fired heaters are used for heating hydrocarbons fluids in the refineries and petrochemical plants. They are used for high temperature heat transfer. In most fired heaters, we are burning fuel gas as source of heat . There are many heaters in the world where liquid fuel is also burnt in the fired heaters to provide the energy, but their number is decreasing due to tighter pollution laws. Heaters that are processing hydrocarbons services are prone to coking and cracking depending upon the nature of the hydrocarbons being processed. Typically heaters may run length of anywhere from 3 months for coking service to 6 years for different services. Heater designers and operators are always faced with the challenge of providing uniform heat transfer to all the tubes. Engineers use equations that assume uniform heat transfer to heater tubes When designing fired heaters. However, in reality, most fired heaters do not experience uniform heat transfer, and as a result, hot spots develop on the tubes. These hot spots cause coking inside the tubes which requires the heater be shutdown periodically to remove the coke and clean the tubes. Any shutdown to clean the tubes in a fired heater causes a substantial production loss. The owners want to extend the run length of fired heaters. Furnace Improvements has developed a new patented firing technology that provides uniform heat transfer to heater tubes. This technology can be applied to most fired heaters. Our patented technology reorients the burners at a slight angle away from the tubes. We are able to direct the hottest part of the flames and flue gases away from the tubes without affecting the heat transfer in any way. FIS has installed this in 5 heaters ranging from 14 MMBtu/hr. to 280 MMBtu/hr. The clients are experiencing significant reduction in tube metal temperatures. This is translating into lower coking rates and higher tube life. We have been able to increase the capacity of the heaters in most of the cases. In one of the case study that has been presented in this heater, the heater duty was increased from 14 MMBtu/hr. to 21 MMBtu/hr. Inclined firing improves the heat transfer to the tubes and makes in uniform.
Catalytic Reforming: Catalyst, Process Technology and Operations Overview
Catalytic Reforming: Catalyst, Process Technology and Operations Overview
Contents
Fundamentals of Catalytic Reforming
Objective
Reaction Chemistry and Mechanisms
Desirable and Undesirable Reactions
Process Variables
Reactor Temperature
Reactor Pressure
Space Velocity
Hydrogen / Hydrocarbon Ratio
Feedstock
Yield Charts
Reforming Process Flow Sheets (PFDs)
Fixed Bed reforming
Semi Regenerative Reforming
(CCR) Continuous Catalytic Regenerative Reforming
Octanizing
Dualforming
RZ Platforming
Reforming catalyst
Catalyst Types
Catalyst Poisons
Catalyst Distribution
Catalyst Sampling
Catalyst Regeneration
Catalytic Reforming Economics Comparison
Key Energy and Environmental Facts
Conclusions
Centrifugal Compressors
Centrifugal Compressors
SECTION ONE - ANTI-SURGE PROTECTION AND THROUGHPUT REGULATION
0 INTRODUCTION
1 SCOPE
2 MACHINE CHARACTERISTICS
2.1 Characteristics of a Single Compressor Stage
2.2 Characteristic of a Multiple Stage Having More
Than One Impeller
2.3 Use of Compressor Characteristics in Throughput
Regulation Schemes
3 MECHANISM AND EFFECTS OF SURGE
3.1 Basic Flow Instabilities
3.2 Occurrence of Surge
3.3 Intensity of Surge
3.4 Effects of Surge
3.5 Avoidance of Surge
3.6 Recovery from Surge
4 CONTROL SCHEMES INCLUDING SURGE PROTECTION
4.1 Output Control
4.2 Surge Protection
4.3 Surge Detection and Recovery
5 DYNAMIC CONSIDERATIONS
5.1 Interaction
5.2 Speed of Response of Antisurge Control System
6 SYSTEM EQUIPMENT SPECIFICATIONS
6.1 The Antisurge Control Valve
6.2 Non-return Valve
6.3 Pressure and flow measurement
6.4 Signal transmission
6.5 Controllers
7 TESTING
7.1 Determination of the Surge Line
7.2 Records
8 INLET GUIDE VANE UNITS
8.1 Application
8.2 Effect on Power Consumption of the Compressor
8.3 Effect of Gas Conditions, Properties and Contaminants
8.4 Aerodynamic Considerations
8.5 Control System Linearity
8.6 Actuator Specification
8.7 Avoidance of Surge
8.8 Features of Link Mechanisms
8.9 Limit Stops and Shear Links
APPENDICES
A LIST OF SYMBOLS AND PREFERRED UNITS
B WORKED EXAMPLE 1 COMPRESSOR WITH VARIABLE INLET PRESSURE AND VARIABLE GAS COMPOSITION
C WORKED EXAMPLE 2 A CONSTANT SPEED ~ STAGE COMPRESSOR WITH INTER-COOLING
D WORKED EXAMPLE 3 DYNAMIC RESPONSE OF THE ANTISURGE PROTECTION SYSTEM FOR A SERVICE AIR COMPRESSOR RUNNING AT CONSTANT SPEED
E EXAMPLE OF INLET GUIDE VANE REGULATION
FIGURES
2.1 TYPICAL COMPRESSOR STAGE CHARACTERISTIC PLOTTED WITH FLOW AT DISCHARGE CONDITIONS
2.2 TYPICAL COMPRESSOR STAGE CHARACTERISTIC PLOTTED WITH FLOW AT INLET CONDITIONS
2.3 PERFORMANCE CHARACTERISTICS OF A COMPRESSOR STAGE AT VARYING SPEEDS
2.4 SYSTEM WORKING POINT DEFINED BY INTERSECTION OF PROCESS AND COMPRESSOR CHARACTERISTICS
2.5 DISCHARGE THROTTLE REGULATION
2.6 BYPASS REGULATION
2.7 INLET THROTTLE REGULATION
2.8 INLET GUIDE VANE REGULATION
2.9 VARIABLE SPEED REGULATION
3.1 GAS PULSATION LEVELS FOR A CENTRIFUGAL COMPRESSOR
3.2 REPRESENTATION OF CYCLIC FLOW DURING SURGE OF LONG PERIOD
3.3 TYPICAL WAVEFORM OF DISCHARGE PRESSURE DURING SURGE
3.4 MULTIPLE SURGE LINE FOR A MULTISTAGE CENTRIFUGAL COMPRESSOR
3.5 TYPICAL MULTIPLE SURGE LINES FOR SINGLE STAGE AXIAL-FLOW COMPRESSOR
4.1 GENERAL SCHEMATIC FOR COMPRESSORS OPERATING IN PARALLEL TO FEED MULTIPLE USER PLANTS
4.2 ILLUSTRATION OF SAFETY MARGIN BETWEEN SURGE POINT AND SURGE PROTECTION POINT AT WHICH ANTISURGE SYSTEM IS ACTIVATED
4.3 ANTISURGE SYSTEM FOR COMPRESSOR WITH FLAT PERFO ..........
Process Control Presentation on control modes, Proportional, Integral, Deriva...
Based on my 8 years of experience in Oil & Gas industry I'm trying here to introduce you to the most of what you may need to know about Process Control as a chemical engineer. This is an introduction to understand more about :-
Introduction
Process Attributes
Control Modes
Control Modes comparison
Control Mode Selection
System Order
System Response
Control Tuning
Typical Tuning Values
References
This is 3 of 4 presentations on this topic.
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
A Real-Time Approach to Process Control by William Y. Svrcek.
Thank you.
Process Control Presentation on Sensing devices as temperature Sensors, press...
Based on my 8 years of experience in Oil & Gas industry I'm trying here to introduce you to the most of what you may need to know about Process Control as a chemical engineer. This is an introduction to understand more about :-
-Control Concepts
-Feedback Control Loop
-Sensors
-Signal Transmitters
-Controllers
-Final Control Element
-Control Loop Modes
This is 2 of 4 presentations on this topic.
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
Thank you.
Steam Reforming - Catalyst Loading
OBJECTIVES
Best practices
Sock Loading
Unidense
Pressure Drop Measurement
Common Problems
Pressure Relief valve sizing and design
Safety is the most important factor in designing a process system. Some undesired conditions might happen leading to damage in a system. Control systems might be installed to prevent such conditions, but a second safety device is also needed. One kind of safety device which is commonly used in the processing industry is the relief valve. A relief valve is a type of valve to control or limit the pressure in a system by allowing the pressurised fluid to flow out from the system.
What's hot (20)
Fired Equipment presentation on Types, Classification and governing Equations...
Fired Equipment presentation on Types, Classification and governing Equations...
Process control presentation on Final Control Element, components, types, val...
Process control presentation on Final Control Element, components, types, val...
Aspen Plus - Intermediate Process Modeling (3 of 3) (Slideshare)
Aspen Plus - Intermediate Process Modeling (3 of 3) (Slideshare)
Catalytic Reforming: Catalyst, Process Technology and Operations Overview
Catalytic Reforming: Catalyst, Process Technology and Operations Overview
Process Control Presentation on control modes, Proportional, Integral, Deriva...
Process Control Presentation on control modes, Proportional, Integral, Deriva...
Process Control Presentation on Sensing devices as temperature Sensors, press...
Process Control Presentation on Sensing devices as temperature Sensors, press...
Similar to Steam Turbines presentation on Types, Classification and governing Equations
Electric Motors presentation on Types and Classification
Based on my 8 years of experience in Oil & Gas industry I can claim that you can find here All what you need to know about Electric Motors. This is an introduction to understand more about their:-
- Theory.
- Governing Equations.
- Types.
- Nameplate Data.
You can find also more at:
http://hassanelbanhawi.com/rotatingequipment/Electricmotors
All the data and the illustrative figures presented here can be found through two reference books:-
ENGINEERING DATA BOOK by Gas Processors Suppliers Association
Process Technology - Equipment and Systems by Charles E. Thomas
Thank you.
Heat Exchanger.pdf
All about heat transfer.
Chemical engineering
Mechanical engineering
Thermal engineering
Dairy engineering
Food engineering
Automobile engineering
Refrigeration engineering
Applied Fluid Mechanics - Course Overview (AFD0)
Applied Fluid Dynamics Course. Part 1 - Incompressible Flow
---
This is a Course Overview of Applied Fluid Dynamics Course.
The course is based in Engineering Applications
---
The course is structured in 7 Blocks
AFD1 The Mechanical Energy Equation
AFD2 Pipe, Fittings and Valves
AFD3 Energy Loss due to Friction
AFD4 Flow Measurement Equipment
AFD5 Pumps
AFD6 Incompressible Flow Applications
AFD7 Agitation and Mixing
Visit www.ChemicalEngineeringGuy.com/Courses for more information!
Similar to Steam Turbines presentation on Types, Classification and governing Equations (8)
Electric Motors presentation on Types and Classification
Electric Motors presentation on Types and Classification
End of Session 2 Presentation 11-29-16 Corey Harpe EXTERNAL
End of Session 2 Presentation 11-29-16 Corey Harpe EXTERNAL
Recently uploaded
The Benefits and Techniques of Trenchless Pipe Repair.pdf
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
一比一原版(IIT毕业证)伊利诺伊理工大学毕业证成绩单专业办理
IIT毕业证原版定制【微信：176555708】【伊利诺伊理工大学毕业证成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
学历顾问：微信：176555708
WATER CRISIS and its solutions-pptx 1234
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Immunizing Image Classifiers Against Localized Adversary Attacks
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Architectural Portfolio Sean Lockwood
This portfolio contains selected projects I completed during my undergraduate studies. 2018 - 2023
Investor-Presentation-Q1FY2024 investor presentation document.pptx
this is the investor presemtaiton document for qurrter 1 2024
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Horizon Generation
一比一原版(SFU毕业证)西蒙菲莎大学毕业证成绩单如何办理
SFU毕业证原版定制【微信：176555708】【西蒙菲莎大学毕业证成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
学历顾问：微信：176555708
HYDROPOWER - Hydroelectric power generation
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
一比一原版(UofT毕业证)多伦多大学毕业证成绩单如何办理
UofT毕业证原版定制【微信：176555708】【多伦多大学毕业证成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
学历顾问：微信：176555708
Recently uploaded (20)
The Benefits and Techniques of Trenchless Pipe Repair.pdf
The Benefits and Techniques of Trenchless Pipe Repair.pdf
Planning Of Procurement o different goods and services
Planning Of Procurement o different goods and services
Immunizing Image Classifiers Against Localized Adversary Attacks
Immunizing Image Classifiers Against Localized Adversary Attacks
Pile Foundation by Venkatesh Taduvai (Sub Geotechnical Engineering II)-conver...
Pile Foundation by Venkatesh Taduvai (Sub Geotechnical Engineering II)-conver...
Investor-Presentation-Q1FY2024 investor presentation document.pptx
Investor-Presentation-Q1FY2024 investor presentation document.pptx
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
Steam Turbines presentation on Types, Classification and governing Equations
- 1. An introductory guide to Steam Turbines for Chemical Engineers Steam Turbines
- 25. 25www.hassanelbanhawi.com 7. Resources • Videos 1. Steam Turbines 2. Steam Turbines (Impulse Vs. Reaction design) • Websites 1. Comparison between Impulse Turbine and Reaction Turbine. 2. Thermodynamics-Steam Turbine. • Excel Tools 1. Steam Turbines Calculation Tool - Hassan ElBanhawi 2. Steam Tables - Magnus Holmgren
- 26. 26 Hassan M. ElBanhawi Process Engineer | M.Sc. www.hassanelbanhawi.com • Professional Experience ‐ Process Engineer at GAP Tech. ‐ Process Engineer at Assiut Oil Refinery. ‐ Process Engineer at Abu Zaable Fertilizers. • Academic Background ‐ M.Sc. in Chemical Engineering. ‐ B.Sc. in Petroleum Refining and Petrochemical Engineering.
- 27. 27 Hassan M. ElBanhawi Process Engineer | M.Sc. www.hassanelbanhawi.com • Other Topics ‐ Pumps ‐ Compressors ‐ Pipeline Sizing ‐ Heat Exchangers ‐ Electric Motors ‐ Infographics