This is the Continuous Assessment Test for SS2 DP with Test of Practicals included. It is accurately measured so that more than one students can get a copy from a single print out.
This is my first term examination for ss2. It is well detailed as it covers every part of the scheme. It contains three parts namely; Objective, Theory, Test of Practical a normal standard WAEC Examination.
This is my first term examination for SS3 D.P. It is well detailed as it covers every part of the scheme. It contains three parts namely; Objective, Theory, Test of Practical a normal standard WAEC Examination.
This is my first term examination for SS1 It is well detailed as it covers every part of the scheme. it contains three parts namely; Objective, Theory and Test of Practical a normal waec examination.
SS1 DATA PROCESSING PRACTICAL EXAMINATION (FIRST TERM)Ejiro Ndifereke
This is the first term S1 Data Processing Practical Examination strictly on Microsoft Word. It is NECO and WAEC SSCE standard question to prepare the student.
S3 DATA PROCESSING FIRST TERM PRE-WAEC (2ND HALF EXAMINATION)Ejiro Ndifereke
This is the second half of their Examination in preparation for their upcoming Waec data processing. And have been preparing my students extensively with practicals and the syllabus.
This is my first term examination for ss2. It is well detailed as it covers every part of the scheme. It contains three parts namely; Objective, Theory, Test of Practical a normal standard WAEC Examination.
This is my first term examination for SS3 D.P. It is well detailed as it covers every part of the scheme. It contains three parts namely; Objective, Theory, Test of Practical a normal standard WAEC Examination.
This is my first term examination for SS1 It is well detailed as it covers every part of the scheme. it contains three parts namely; Objective, Theory and Test of Practical a normal waec examination.
SS1 DATA PROCESSING PRACTICAL EXAMINATION (FIRST TERM)Ejiro Ndifereke
This is the first term S1 Data Processing Practical Examination strictly on Microsoft Word. It is NECO and WAEC SSCE standard question to prepare the student.
S3 DATA PROCESSING FIRST TERM PRE-WAEC (2ND HALF EXAMINATION)Ejiro Ndifereke
This is the second half of their Examination in preparation for their upcoming Waec data processing. And have been preparing my students extensively with practicals and the syllabus.
This is my first term Examination questions for Junior Secondary School One popularly known as JSS1. Each questions are detailed as it covers the whole scheme for the first term.
This is my first term examination for JSS3. It comprises of two parts, each part having 60 obj questions. This is intended to prepare them extensively for their upcoming BECE Examination. Which comprises of the things they have learnt from JS1 to JS3
SS2 DATA PROCESSING PRACTICAL EXAMINATION (FIRST TERM)Ejiro Ndifereke
This is the first term S2 Data Processing Practical Examination strictly on Microsoft Access (Database). It is NECO and WAEC SSCE standard question to prepare the student.
This questions are to prepare them for computer Studies BECE for both Neco and Junior Waec. The more you prepare with these questions the more they get ready for the actual Examination.
SS3 DATA PROCESSING PRACTICAL EXAMINATION (FIRST TERM)Ejiro Ndifereke
This is the first term SS3 Data Processing Practical Examination strictly on Graphics (Corel Draw). It is NECO and WAEC SSCE standard question to prepare the student.
This is the second Continuous Assessment Test for J1 first term. It arranged in a format to make it easy for students to use. four student to one print out then you can cut it off. The measurements are accurate if you want to use exactly my questions to set for your students.
This is the Continuous Assessment Test for SS1 Data Processing and in this C.A 2 I included Test of Practical so that the students can get use to how this test of practical is been written on time. Our School is the first to introduce it in C.A and Examination and I im proud to say I initiated this idea. They accurately measure to economize and make copies available.
S3 Data Processing Pre-Waec Examination (First Half)Ejiro Ndifereke
This is the First Half Examination of Pre-WAEC Examination on Data Processing for SS3 this is to prepare them extensively for their upcoming WAEC Examination.
This is the first term Continuous Assessment Test for JS2. It is arranged in a way that economizes for the school. Where you have one print out for four students and all you have to do is cut it off. They are accurately measured.
Database Design 1. What is a data model A. method of sto.docxtheodorelove43763
Database Design
1. What is a data model?
A. method of storing files on a disk drive
B. simple representation of complex real-world data structures
C. name of system for designing software
D. method of designing invoices for customers
2. Which of the following are the most important elements of a security program for databases:
a. Integrity, referential index, user rights
b. Confidentiality. Integrity and Availability
c. Availability, multi-master replication, high-bandwidth
d. DBA, System Admin, and PMO
3. Suppose that you have a table with a number of product sales. The product code may repeat in the table as it is likely the same product could be sold multiple times. If you want to produce a list of the unique products that are sold, you could use which of the following keywords in the SELECT statement:
A. LIKE
B. ORDERED BY
C. DISTINCT
D. DIFFERENT
4. What does the column represent in a table?
a. Attribute of the table records
b. A complete record in the table
c. The system log from the database
d. A list of database tables
5. What does a row in the table represent?
a. A complete data record
b. List of system logs
c. A list of file systems on database server
d. The primary keys from all the tables.
6. Which of the following is an example of data definition language (DDL)?
a. UPDATE
b. V$SYSLOG
c. CREATE
d. DETAIN
7 . Which of the following is an example of data manipulation language (DML)?
A. SELECT
B. ABORT
C. GRANT
D. REVOKE
8. A _____________ key is an attribute that uniquely identifies a record in a table.
9. A _____________ key is an attribute that is a primary key in one table and is used as a reference in a second table to establish a relationship between the two tables.
10. When running a ‘SELECT’ join, what is returned from the table:
A. ROW
B. Column
C. single attribute
D. all tables in the database
11. When running a ‘PROJECT’ join, what is returned from the table:
A. COLUMN
B. ROW
C. Single Attribute
D. a list of tables in the database
12. What are the 3 types of relationships commonly shown on an entity relationship diagram?
A. 1 to 1
B. 1 to Many
C. Many to Many
D. All the above
E. None of the above
13. What is an entity relationship diagram (ERD)?
A. graphical representation of all entities in a database and how the entities are related
b. list of the log files in the database.
C. list of all the tablespace names in a database
D. A diagram that shows how data is written to a physical disk drive.
14. The definition of an attribute in a table that has no value is:
A. ZERO
b. NULL
c. ZILTCH
D. NONE
15. A __________ attribute can either be stored on retrieve on an ad hoc basis.
16. Which of the following is not considered a characteristic of distributed management systems:
a. Concurrency Control
b. Business intelligence
c. Transaction management
d. query optimization
17. A database can process many types of data classifications. Which of the following is not a data class.
Database Design 1. What is a data model A. method of sto.docxwhittemorelucilla
Database Design
1. What is a data model?
A. method of storing files on a disk drive
B. simple representation of complex real-world data structures
C. name of system for designing software
D. method of designing invoices for customers
2. Which of the following are the most important elements of a security program for databases:
a. Integrity, referential index, user rights
b. Confidentiality. Integrity and Availability
c. Availability, multi-master replication, high-bandwidth
d. DBA, System Admin, and PMO
3. Suppose that you have a table with a number of product sales. The product code may repeat in the table as it is likely the same product could be sold multiple times. If you want to produce a list of the unique products that are sold, you could use which of the following keywords in the SELECT statement:
A. LIKE
B. ORDERED BY
C. DISTINCT
D. DIFFERENT
4. What does the column represent in a table?
a. Attribute of the table records
b. A complete record in the table
c. The system log from the database
d. A list of database tables
5. What does a row in the table represent?
a. A complete data record
b. List of system logs
c. A list of file systems on database server
d. The primary keys from all the tables.
6. Which of the following is an example of data definition language (DDL)?
a. UPDATE
b. V$SYSLOG
c. CREATE
d. DETAIN
7 . Which of the following is an example of data manipulation language (DML)?
A. SELECT
B. ABORT
C. GRANT
D. REVOKE
8. A _____________ key is an attribute that uniquely identifies a record in a table.
9. A _____________ key is an attribute that is a primary key in one table and is used as a reference in a second table to establish a relationship between the two tables.
10. When running a ‘SELECT’ join, what is returned from the table:
A. ROW
B. Column
C. single attribute
D. all tables in the database
11. When running a ‘PROJECT’ join, what is returned from the table:
A. COLUMN
B. ROW
C. Single Attribute
D. a list of tables in the database
12. What are the 3 types of relationships commonly shown on an entity relationship diagram?
A. 1 to 1
B. 1 to Many
C. Many to Many
D. All the above
E. None of the above
13. What is an entity relationship diagram (ERD)?
A. graphical representation of all entities in a database and how the entities are related
b. list of the log files in the database.
C. list of all the tablespace names in a database
D. A diagram that shows how data is written to a physical disk drive.
14. The definition of an attribute in a table that has no value is:
A. ZERO
b. NULL
c. ZILTCH
D. NONE
15. A __________ attribute can either be stored on retrieve on an ad hoc basis.
16. Which of the following is not considered a characteristic of distributed management systems:
a. Concurrency Control
b. Business intelligence
c. Transaction management
d. query optimization
17. A database can process many types of data classifications. Which of the following is not a data class.
This is my first term Examination questions for Junior Secondary School One popularly known as JSS1. Each questions are detailed as it covers the whole scheme for the first term.
This is my first term examination for JSS3. It comprises of two parts, each part having 60 obj questions. This is intended to prepare them extensively for their upcoming BECE Examination. Which comprises of the things they have learnt from JS1 to JS3
SS2 DATA PROCESSING PRACTICAL EXAMINATION (FIRST TERM)Ejiro Ndifereke
This is the first term S2 Data Processing Practical Examination strictly on Microsoft Access (Database). It is NECO and WAEC SSCE standard question to prepare the student.
This questions are to prepare them for computer Studies BECE for both Neco and Junior Waec. The more you prepare with these questions the more they get ready for the actual Examination.
SS3 DATA PROCESSING PRACTICAL EXAMINATION (FIRST TERM)Ejiro Ndifereke
This is the first term SS3 Data Processing Practical Examination strictly on Graphics (Corel Draw). It is NECO and WAEC SSCE standard question to prepare the student.
This is the second Continuous Assessment Test for J1 first term. It arranged in a format to make it easy for students to use. four student to one print out then you can cut it off. The measurements are accurate if you want to use exactly my questions to set for your students.
This is the Continuous Assessment Test for SS1 Data Processing and in this C.A 2 I included Test of Practical so that the students can get use to how this test of practical is been written on time. Our School is the first to introduce it in C.A and Examination and I im proud to say I initiated this idea. They accurately measure to economize and make copies available.
S3 Data Processing Pre-Waec Examination (First Half)Ejiro Ndifereke
This is the First Half Examination of Pre-WAEC Examination on Data Processing for SS3 this is to prepare them extensively for their upcoming WAEC Examination.
This is the first term Continuous Assessment Test for JS2. It is arranged in a way that economizes for the school. Where you have one print out for four students and all you have to do is cut it off. They are accurately measured.
Database Design 1. What is a data model A. method of sto.docxtheodorelove43763
Database Design
1. What is a data model?
A. method of storing files on a disk drive
B. simple representation of complex real-world data structures
C. name of system for designing software
D. method of designing invoices for customers
2. Which of the following are the most important elements of a security program for databases:
a. Integrity, referential index, user rights
b. Confidentiality. Integrity and Availability
c. Availability, multi-master replication, high-bandwidth
d. DBA, System Admin, and PMO
3. Suppose that you have a table with a number of product sales. The product code may repeat in the table as it is likely the same product could be sold multiple times. If you want to produce a list of the unique products that are sold, you could use which of the following keywords in the SELECT statement:
A. LIKE
B. ORDERED BY
C. DISTINCT
D. DIFFERENT
4. What does the column represent in a table?
a. Attribute of the table records
b. A complete record in the table
c. The system log from the database
d. A list of database tables
5. What does a row in the table represent?
a. A complete data record
b. List of system logs
c. A list of file systems on database server
d. The primary keys from all the tables.
6. Which of the following is an example of data definition language (DDL)?
a. UPDATE
b. V$SYSLOG
c. CREATE
d. DETAIN
7 . Which of the following is an example of data manipulation language (DML)?
A. SELECT
B. ABORT
C. GRANT
D. REVOKE
8. A _____________ key is an attribute that uniquely identifies a record in a table.
9. A _____________ key is an attribute that is a primary key in one table and is used as a reference in a second table to establish a relationship between the two tables.
10. When running a ‘SELECT’ join, what is returned from the table:
A. ROW
B. Column
C. single attribute
D. all tables in the database
11. When running a ‘PROJECT’ join, what is returned from the table:
A. COLUMN
B. ROW
C. Single Attribute
D. a list of tables in the database
12. What are the 3 types of relationships commonly shown on an entity relationship diagram?
A. 1 to 1
B. 1 to Many
C. Many to Many
D. All the above
E. None of the above
13. What is an entity relationship diagram (ERD)?
A. graphical representation of all entities in a database and how the entities are related
b. list of the log files in the database.
C. list of all the tablespace names in a database
D. A diagram that shows how data is written to a physical disk drive.
14. The definition of an attribute in a table that has no value is:
A. ZERO
b. NULL
c. ZILTCH
D. NONE
15. A __________ attribute can either be stored on retrieve on an ad hoc basis.
16. Which of the following is not considered a characteristic of distributed management systems:
a. Concurrency Control
b. Business intelligence
c. Transaction management
d. query optimization
17. A database can process many types of data classifications. Which of the following is not a data class.
Database Design 1. What is a data model A. method of sto.docxwhittemorelucilla
Database Design
1. What is a data model?
A. method of storing files on a disk drive
B. simple representation of complex real-world data structures
C. name of system for designing software
D. method of designing invoices for customers
2. Which of the following are the most important elements of a security program for databases:
a. Integrity, referential index, user rights
b. Confidentiality. Integrity and Availability
c. Availability, multi-master replication, high-bandwidth
d. DBA, System Admin, and PMO
3. Suppose that you have a table with a number of product sales. The product code may repeat in the table as it is likely the same product could be sold multiple times. If you want to produce a list of the unique products that are sold, you could use which of the following keywords in the SELECT statement:
A. LIKE
B. ORDERED BY
C. DISTINCT
D. DIFFERENT
4. What does the column represent in a table?
a. Attribute of the table records
b. A complete record in the table
c. The system log from the database
d. A list of database tables
5. What does a row in the table represent?
a. A complete data record
b. List of system logs
c. A list of file systems on database server
d. The primary keys from all the tables.
6. Which of the following is an example of data definition language (DDL)?
a. UPDATE
b. V$SYSLOG
c. CREATE
d. DETAIN
7 . Which of the following is an example of data manipulation language (DML)?
A. SELECT
B. ABORT
C. GRANT
D. REVOKE
8. A _____________ key is an attribute that uniquely identifies a record in a table.
9. A _____________ key is an attribute that is a primary key in one table and is used as a reference in a second table to establish a relationship between the two tables.
10. When running a ‘SELECT’ join, what is returned from the table:
A. ROW
B. Column
C. single attribute
D. all tables in the database
11. When running a ‘PROJECT’ join, what is returned from the table:
A. COLUMN
B. ROW
C. Single Attribute
D. a list of tables in the database
12. What are the 3 types of relationships commonly shown on an entity relationship diagram?
A. 1 to 1
B. 1 to Many
C. Many to Many
D. All the above
E. None of the above
13. What is an entity relationship diagram (ERD)?
A. graphical representation of all entities in a database and how the entities are related
b. list of the log files in the database.
C. list of all the tablespace names in a database
D. A diagram that shows how data is written to a physical disk drive.
14. The definition of an attribute in a table that has no value is:
A. ZERO
b. NULL
c. ZILTCH
D. NONE
15. A __________ attribute can either be stored on retrieve on an ad hoc basis.
16. Which of the following is not considered a characteristic of distributed management systems:
a. Concurrency Control
b. Business intelligence
c. Transaction management
d. query optimization
17. A database can process many types of data classifications. Which of the following is not a data class.
Microsoft Fabric Analytics Engineer (DP-600) Exam Dumps 2024.pdfSkillCertProExams
• For a full set of 720+ questions. Go to
https://skillcertpro.com/product/microsoft-fabric-analytics-engineer-dp-600-exam-questions/
• SkillCertPro offers detailed explanations to each question which helps to understand the concepts better.
• It is recommended to score above 85% in SkillCertPro exams before attempting a real exam.
• SkillCertPro updates exam questions every 2 weeks.
• You will get life time access and life time free updates
• SkillCertPro assures 100% pass guarantee in first attempt.
A ____________ is a disconnected, memory-resident representation o.docxransayo
A ____________ is a disconnected, memory-resident representation of the database which contains tables, columns, rows, relationships, and constraints.
a. DataSymbol
b. DataObject
c. DataMart
d. DataSet
_______ is an object-oriented programming language developed by Sun Microsystems that runs on top of Web browser software.
a. ActiveX
b. Python
c. Java
d. JavaScript
____________ is rapidly becoming the data exchange standard for e-commerce applications; it is important because it provides the semantics that facilitate the sharing, exchange, and manipulation of structured documents over organizational boundaries.
a. Semantic Markup Language (SML)
b. Unified Markup Language (UML)
c. Extensible Markup Language (XML)
d. PML (Programming Markup Language (PML)
________ the objects that manage the connection with a data source and provide data to the consumers.
a. Providers
b. Servers
c. Consumers
d. Producers
An _____________ document is an advanced data definition language that is used to describe the structure (elements, data types, relationship types, ranges, and default values) of XML data documents.
a. Unified Markup Language (UML)
b. Extensible Markup Language (XML)
c. Semantic Markup Language (SML)
d. XML Schema Definition (XSD)
Which of the following is NOT a common feature of a web application server?
a. Security and authentication of users
b. Database access with transaction management
c. Performance and fault tolerance
d. All of these choices are correct.
To define a ______________ you must create a data source name (DSN) for the data source.
a. data source
b. detailed data source
c. named space
d. remote data space
A __________ is an external application that is automatically invoked by the browser when needed.
a. plug-in
b. program
c. preference
d. app
Which of the following is NOT a database connectivity option?
a. Native SQL connectivity
b. ODBC, DAO, RDO
c. ABC.NET
d. OLE-DB
Which of the following is a type of cloud computing implementation?
a. Private cloud
b. Public cloud
c. Community cloud
d. All of these choices are correct.
___________________ refers to the mechanisms through which application programs interact and communicate with data repositories.
a. Database connectivity
b. Database management
c. Database development
d. Database schema
A _________ is a series of instructions executed in interpreter mode; it is a plain text file that is not compiled like COBOL, C++, or Java.
a. script
b. processor
c. module
d. function
Microsoft developed _________to answer the need for non-relational data access and to simplify data connectivity.
a. DEO
b. ODBC
c. OLE-DB
d. RDO
_______ was the first piece of Microsoft's strategy to provide a unified object-oriented framework for the development of next-generation applications.
a. ODBC
b. RDO
c. OLE-DB
d. DEO
Which of the following is a we.
Fai[ Away with Dynamo, Bigtabte, and Cassandra194 cHArlrEF.docxssuser454af01
Fai[ Away with Dynamo, Bigtabte, and Cassandra
194 cHArlrEFt =; Database Processing
(2) Does this design eliminate the potential for data integ-
rity problems that occur in the spreadsheet? \iVhy or
whynot?
(3) Design a database for the data model that uses l4lork-
Version2. Speciff key and foreign key columns.
(a) Design a database for the data models that uses Work-
Version?. Specify key and foreign key columns.
(5) Is the design with Work-Version2 betler than the de-
sign for Work-Version3? Why or why not?
d. Figure 5-30c shows a third alternative data model for the
sheet-music-tracking problem. In this data model, use
As you learned in Case Study 1, Amazon.com processed more
than 306 order items per second on its peak day of the 2012
holiday sales season. To do that, it processed customer trans-
actions on tens of thousands of servers. With that many com-
puters, failure is inevitable. Even if the probability of any one
server failing is .0001, the likelihood that not one out of 10,000
of them fails is .9999 raised to the 10,000 power, which is about
.37. Thus, for these assumptions the likelihood of at least one
failure is 63 percent. For reasons that go beyond the scope
of this discussion, the likelihood of failure is actually much
greater.
Amazon.com must be able to thrive, even in the presence
of such constant failure. O! as Arfiazon.com engineers stated:
"Customers should be able to view and add items to their
shopping cart even if disks are failing, network routes are flap-
ping, o1 data centers are being destroyed byioinadosl'e
The onlyway to deal with such failure is to replicate the data
on multiple servers. \{/hen a customer stores a Wish List, for
example, that Wish List needs to be stored on different, geo-
graphically separated servers. Then, when (notice when, not
fl a server with one copy of the Wish List fails, Amazon.com
applications obtain it from another server.
Such data replication solves one problem but introduces
another Suppose that the customer's Wish List is stored on
servers A, B, and C and server A fails. \Arhile server A is dolrm,
server B or C can provide a copy of the Wish List, but if the
either Work_Version2 or Work_Version3, whichever you
think is better.
(r) Select identifiers for each entity in your data
fustiffyour selection.
(2) Summarize the differences befiiveen this data model
and that in Figure 5-30b. \tVhich data model is better?
why?
(3) Design a database for this data model. Speci$r key and
foreign key columns.
Which of the three data models is the best? fusti$r your
customer changes it, that Wish List can only be rewritten
servers B and C. It cannot be written to A, because A is
running. When server A comes back into service, it will
the old copy of the Wish List. The next day, when the
reopens his or her Wish List, two different versions
the most recent one on servers B and C and an older one
server A. The customer wants the most current one. How
Amazon.com ensure that it w ...
Here you can find 1000's of Multiple Choice Questions(MCQs) of Database Management System(DBMS) includes the MCQs of fundamental of Database Management System(DBMS), introduction of Database Model, Relational Database Model, Constrants, Relational Algebra, Definition and types of Structured Query Language(SQL), Embedded SQL, Database Normalization (1NF, 2NF, 3NF, BCNF, 4NF, 5NF and DKNF) and Data Storage Devices, Architecture of DBMS and Database Security, Integrity and Quality
Databricks Data Analyst Associate Exam Dumps 2024.pdfSkillCertProExams
• For a full set of 270+ questions. Go to
https://skillcertpro.com/product/databricks-data-analyst-associate-exam-questions/
• SkillCertPro offers detailed explanations to each question which helps to understand the concepts better.
• It is recommended to score above 85% in SkillCertPro exams before attempting a real exam.
• SkillCertPro updates exam questions every 2 weeks.
• You will get life time access and life time free updates
• SkillCertPro assures 100% pass guarantee in first attempt.
Sale For E-Note and Exam Questions For Secondary Schools.pdfEjiro Ndifereke
- As a school owner do you need E-Note for your teachers in all subject well search no more im here for you at an affordable price you have access to all subject covering every term (first term, second term and third term)
- As a teacher do you E-Note for your subject accross all terms i got you covered
- As a teacher are you looking for examination question for all terms including Continuous Assessment Test (CAT)
This is the Continuous Assessment Test for SS2 Data Processing. Included in this First C.A 1 Test is Test of Practical so as to perfect their skill in writing T.O.P for their WAEC Examination they are going to write.
This is the Continuous Assessment Test For Data Processing for Senior Secondary One also known as SS1 First Term Work, in this test I included Test of Practical so as to prepare them early for their Waec Examiniation
This is the Continuous Assessment Test for Junior Secondary School Two for Computer Studies First Term work.
This is uploaded so that other Computer Educator can make use of or at the very least a guide to set a standard question.
This is a slide presentation on Database Management System.
Note: All this slide are design by me and licensed under the school I'm currently teaching "Good Shepherd Schools"
This is a slide presentation on ways people can misuse the computer on the internet.
I am currently an ICT Educator at Good Shepherd Schools Lagos State, Nigeria.
Note: I will be uploading more powerpoint presentation in my field so ensure your following me to get updated thanks.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
Honest Reviews of Tim Han LMA Course Program.pptxtimhan337
Personal development courses are widely available today, with each one promising life-changing outcomes. Tim Han’s Life Mastery Achievers (LMA) Course has drawn a lot of interest. In addition to offering my frank assessment of Success Insider’s LMA Course, this piece examines the course’s effects via a variety of Tim Han LMA course reviews and Success Insider comments.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
Introduction to AI for Nonprofits with Tapp NetworkTechSoup
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
1. SCHOOL: GOOD SHEPHERD SCHOOLS SUBJECT: DATA PROCESSING C.A 2 CLASS: SS2 EDUCATOR: MR. EJIRO
1. Which of the following makes itpossiblefor entities to sharea relationshipA. multivalued attributes B. a foreign key C. a commonattributeD. the samenumber of
attributes
2. A databasecontains thefields Student_no and Student_name. ifwearegiven theStudent_no then wewill know Student_name. This means thatA. Student_name
has a functionalitywithStudent_IDB. Student_ID is functionally dependent on Student_nameC. Student_nameis functionally dependent onStudent_ID D.These
two attributes havea relationship
3. The requirementthat each entity must havea uniqueprimary key where the valueofthat primary key is not nullis knownas theA. entity integrity ruleB. referential
integrity ruleC. entity relationship ruleD. validation index
4. Which of the following is TRUEabout referentialintegrity rule?A. each primary keymust beunique andnot nullB. for each foreignkey, theremust bea
corresponding primary keyC. repeating groups arenotpermittedD. allattributes must havemeaningfulnames
5. Consider thefollowing entity: CAR_RENTAL(Car_Reg,Make, Model, Driver_Name, Date_Hired,Date_Returned) which ofthefollowing would beincluded in a
repeating group? A. Car_Reg B. MakeC. Driver_NameD. Model
6. Which of the following is TRUEabout relational database design? A. theorder ofattributes is criticalB. eachcolumn mustbe uniqueC. no row should beduplicated
D. all tables must contain a foreignkey
7. Ifa piece of data is stored intwoplaces inthedatabase, then A. storage spaceis wasted B. changing thedata inonespot will causedata inconsistency C. it canbe
more easily accessed D. storage space is wasted andchanging the data in onespotwill cause data inconsistency
8. Which of the following hardware component is themostimportant to theoperation ofa databasemanagement system? A. highresolution videodisplay B. printer
C. high speed, large capacity disk D. mouse
9. The DBMS acts as an interface between what twocomponents ofanenterpriseclass databasesystemA. database application and the database B. data andthe
database C.theuser andthedatabaseapplication D.databaseapplication and SQL
10. What is data types?A. It specifies whattypeofdata is expected inside ofeach column in a table(ef. Number, date/time,string) B. It s pecifies how many tables you
will createwhenyou convert your EntityRelations Modelto a Logical Data ModelC. Itspecifies thedatabase-nameD. Itcounts how manyattributes you have
SCHOOL: GOOD SHEPHERD SCHOOLS SUBJECT: DATA PROCESSING C.A 2 CLASS: SS2 EDUCATOR: MR. EJIRO
1. Which of the following makes itpossiblefor entities to sharea relationshipA. multivalued attributes B. a foreign key C. a commonattributeD. the samenumber of
attributes
2. A databasecontains thefields Student_no and Student_name. ifwearegiven theStudent_no then wewill know Student_name. This means thatA. Student_name
has a functionalitywithStudent_IDB. Student_IDis functionally dependent on Student_nameC. Student_nameis functionally dependent onStudent_ID D.These
two attributes havea relationship
3. The requirementthat each entity must havea uniqueprimary key where the valueofthat primary key is not nullis knownas theA. entity integrity ruleB. referential
integrity ruleC. entity relationship ruleD. validation index
4. Which of the following is TRUEabout referentialintegrity rule?A. each primary keymust beunique andnot nullB. for each foreignkey, theremust bea
corresponding primary keyC. repeating groups arenotpermittedD. allattributes must havemeaningfulnames
5. Consider thefollowing entity: CAR_RENTAL(Car_Reg,Make, Model, Driver_Name, Date_Hired,Date_Returned) which ofthefollowing would beincluded in a
repeating group? A. Car_Reg B. MakeC. Driver_NameD. Model
6. Which of the following is TRUEabout relational database design? A. theorder ofattributes is criticalB. eachcolumn mustbe uniqueC. no row should beduplicated
D. all tables must contain a foreignkey
7. Ifa piece of data is stored intwoplaces inthedatabase, then A. storage spaceis wasted B. changing thedata inonespot will causedata inconsistency C. it canbe
more easily accessed D. storage space is wasted andchanging the data in onespotwill cause data inconsistency
8. Which of the following hardware component is themostimportant to theoperation ofa databasemanagement system? A. highresolution videodisplay B. printer
C. high speed, large capacity disk D. mouse
9. The DBMS acts as an interface between what twocomponents ofanenterpriseclass databasesystemA. database application and the database B. data andthe
database C.theuser andthedatabaseapplication D.databaseapplication and SQL
10. What is data types?A. It specifies whattypeofdata is expected inside ofeach column in a table(ef. Number, date/time,string) B. It specifies how many tables you
will createwhenyou convert your EntityRelations Modelto a Logical Data ModelC. Itspecifies thedatabase-nameD. Itcounts how manyattributes you have
SCHOOL: GOOD SHEPHERD SCHOOLS SUBJECT: DATA PROCESSING C.A 2 CLASS: SS2 EDUCATOR: MR. EJIRO
1. Which of the following makes itpossiblefor entities to sharea relationshipA. multivalued attributes B. a foreign key C. a commonattributeD. the samenumber of
attributes
2. A databasecontains thefields Student_no and Student_name. ifwearegiven theStudent_no then wewill know Student_name. This means thatA. Student_name
has a functionalitywithStudent_IDB. Student_IDis functionally dependent on Student_nameC. Student_nameis functional ly dependent onStudent_ID D.These
two attributes havea relationship
3. The requirementthat each entity must havea uniqueprimary key where the valueofthat primary key is not nullis knownas theA. entity integrity ruleB. referential
integrity ruleC. entity relationship ruleD. validation index
4. Which of the following is TRUEabout referentialintegrity rule?A. each primary keymust beunique andnot nullB. for each foreignkey, theremust bea
corresponding primary keyC. repeating groups arenotpermittedD. allattributes must havemeaningfulnames
5. Consider thefollowing entity: CAR_RENTAL(Car_Reg,Make, Model, Driver_Name, Date_Hired,Date_Returned) which ofthefollowing would beincluded in a
repeating group? A. Car_Reg B. MakeC. Driver_Name D. Model
6. Which of the following is TRUEabout relational database design? A. theorder ofattributes is criticalB. eachcolumn mustbe uniqueC. no row should beduplicated
D. all tables must contain a foreignkey
7. Ifa piece of data is stored intwoplaces inthedatabase, then A. storage spaceis wasted B. changing thedata inonespot will causedata inconsistency C. it can be
more easily accessed D. storage space is wasted andchanging the data in onespotwill cause data inconsistency
8. Which of the following hardware component is themostimportant to theoperation ofa databasemanagement system? A. highresolution videodisplay B. printer
C. high speed, large capacity disk D. mouse
9. The DBMS acts as an interface between what twocomponents ofanenterpriseclass databasesystemA. database application and the database B. data andthe
database C.theuser andthedatabaseapplication D.databaseapplication and SQL
10. What is data types?A. It specifies whattypeofdata is expected inside ofeach column in a table(ef. Number, date/time,string) B. It specifies how many tables you
will createwhenyou convert your EntityRelations Modelto a Logical Data ModelC. Itspecifies thedatabase-nameD. Itcounts how manyattributes you have
2. SCHOOL: GOOD SHEPHERD SCHOOLS SUBJECT: DATA PROCESSING C.A 2 CLASS: SS2 EDUCATOR: MR. EJIRO
1.
th
SCHOOL: GOOD SHEPHERD SCHOOLS SUBJECT: DATA PROCESSING C.A 2 CLASS: SS2 EDUCATOR: MR. EJIRO
SCHOOL: GOOD SHEPHERD SCHOOLS SUBJECT: DATA PROCESSING C.A 2 CLASS: SS2 EDUCATOR: MR. EJIRO
THEORYSECTION (ANSWER ALL QUESTIONS PLEASE!!!)
QUESTION 1
Ai. What is a databasemodel?
ii. List fivetypes of databasemodel and explainthree
Bi. What is a database andlist three(3) examples ofdatabase
Ii. Give four Differences between RDBMS andDBMS using theparameters
Ci. Simeon Mercy bought theMicrosoftOffice suite 2016and she needs to
install only Microsoft Access. Outline the steps Mercy took ininstalling
Microsoft Access
ii. After Installing,Simeon Mercy finds out,theAccess 2016 is not activated.
Explain thetwoways to getherMicrosoft Access activated.
QUESTION 2
Ai. Name thefileextension for Microsoft Access and explainthesteps how to
derived the file extension
ii. Explain whatdo you meanby queries?
Bi. What are the differentways you canenterdata in Access?
Ii. List fivesignificanceof databasemodeland explain three
Ci.
ii.
D
TEST OF PRACTICALS SECTION (USING MICROSOFT ACCESS 2013 & ABOVE)
QUESTION 1
AdesokanAjibola was employed by Microsoft as databaseadministrator andherduties
are creating ofrelations,creating forms for differentfirms andgenerating reports.
A. Outline theprocedural steps to loading yourMicrosoft access databasespecify the
windows
B. Outline theprocedural steps for adding data in datasheet view
C. AdesokanAjibola createda database for Simeon Mercy’s Fashioncompanyandin that
database is a table calledContractTable, outlinetheprocedural steps Ajibola tookin
changing theprimary key from“ContractNum”to “ContractID” in the Contract table
D. Outline the proceduralstepin formatting the “Signing Date”data type “Date/Time”
from Day-Month-Yearto Month-Day-Year
E. Outline theproceduralsteps in changing thefieldsize to 50 intheContract Typefield
F. Outline theprocedural step onhow tocreatetherelationshipbetween thethreetable
and indicatewhat kind ofrelationship is it?
THEORYSECTION (ANSWER ALL QUESTIONS PLEASE!!!)
QUESTION 1
Ai. What is a databasemodel?
ii. List fivetypes of databasemodel and explainthree
Bi. What is a database andlist three(3) examples ofdatabase
Ii. Give four Differences between RDBMS andDBMS using theparameters
Ci. Simeon Mercy bought theMicrosoftOffice suite2016and she needs to install
only Microsoft Access. Outlinethesteps Mercy took in installing Microsoft
Access
ii. After Installing,Simeon Mercy finds out,theAccess 2016 is not activated.
Explain thetwoways to getherMicrosoft Access activated.
QUESTION 2
Ai. Name thefileextension for Microsoft Access and explainthesteps how to
derived the file extension
ii. Explain whatdo you meanby queries?
Bi. What are the differentways you canenterdata in Access?
Ii. List fivesignificanceof databasemodeland explain three
TEST OF PRACTICALS SECTION (USING MICROSOFT ACCESS 2013 & ABOVE)
QUESTION 1
AdesokanAjibola was employed by Microsoft as databaseadministrator andherduties
are creating ofrelations,creating forms for differentfirms andgenerating reports.
A. Outline theprocedural steps to loading yourMicrosoft access databasespecify the
windows
B. Outline theprocedural steps for adding data in datasheet view
C. AdesokanAjibola createda database for Simeon Mercy’s Fashioncompanyandin that
database is a table calledContractTable, outlinetheprocedural steps Ajibola tookin
changing theprimary key from“ContractNum”to “ContractID”in the Contract table
D. Outline the proceduralstepin formatting the “Signing Date”data type “Date/Time”
from Day-Month-Yearto Month-Day-Year
E. Outline theproceduralsteps in changing thefieldsize to 50 intheContract Typefield
F. Outline theprocedural step onhow tocreatetherelationshipbetween thethreetable
and indicatewhat kind ofrelationship is it?
THEORYSECTION (ANSWER ALL QUESTIONS PLEASE!!!)
QUESTION 1
Ai. What is a databasemodel?
ii. List fivetypes of databasemodel and explainthree
Bi. What is a database andlist three(3) examples ofdatabase
Ii. Give four Differences between RDBMS andDBMS using theparameters
Ci. Simeon Mercy bought theMicrosoftOffice suite2016and she needs to
install only Microsoft Access. Outline the steps Mercy took ininstalling
Microsoft Access
ii. After Installing,Simeon Mercy finds out,theAccess 2016 is not activated.
Explain thetwoways to getherMicrosoft Access activated.
QUESTION 2
Ai. Name thefileextension for Microsoft Access and explainthesteps how to
derived the file extension
ii. Explain whatdo you meanby queries?
Bi. What are the differentways you canenterdata in Access?
Ii. List fivesignificanceof databasemodeland explain three
TEST OF PRACTICALS SECTION (USING MICROSOFT ACCESS 2013 & ABOVE)
QUESTION 1
AdesokanAjibola was employed by Microsoft as databaseadministrator andherduties
are creating ofrelations,creating forms for differentfirms andgenerating reports.
A. Outline theprocedural steps to loading yourMicrosoft access databasespecify the
windows
B. Outline theprocedural steps for adding data in datasheet view
C. AdesokanAjibola createda database for Simeon Mercy’s Fashioncompanyandin that
database is a table calledContractTable, outlinetheprocedural steps Ajibola tookin
changing theprimary key from“ContractNum”to “ContractID”in the Contract table
D. Outline the proceduralstepin formatting the “Signing Date”data type “Date/Time”
from Day-Month-Yearto Month-Day-Year
E. Outline theproceduralsteps in changing thefieldsize to 50 intheContract Typefield
F. Outline theprocedural step onhow tocreatetherelationshipbetween thethreetable
and indicatewhat kind ofrelationship is it?