Running head: STUDENT MANUAL 1
STUDENT MANUAL 11
The Bachelor of Science in Nursing Student Manual
Queen Bella
University of Phoenix
Table of Contents
The Mission Statement of the College 3
The Mission Statement of the Nursing School 3
The Purpose Statement of the School 3
Program Description 3
The Student Learning Outcomes 4
Progression Examinations and Assessments 5
Clinical Experience Requirements 6
Clinical Site Selection 6
Clinical Setting Orientation 6
Required Materials 7
Clinical Assignments 7
Clinical Agency and Logs Documentation of Activities 7
Agency Documentation 7
Clinical Logs 7
Clinical Evaluation 8
Clinical Absences 8
Professional Dress Policy 8
Serious Professional Behavior or Performance Issues 9
Simulation Learning Centers 9
Nursing Program Manual for the University of PhoenixThe Mission Statement of the College
The mission of the college is to provide the post and pre-licensure nursing, health care support and health care administration certificates, courses and programs (Lindquist, 2006). The college is committed to providing relevant, innovative education that will address and anticipate the various needs of the healthcare industry, the needs of adults and their employers.The Mission Statement of the Nursing School
The Nursing school aims at nurturing and promoting nursing leadership to its students through the delivery and development of different educational opportunities that will mainly embody the value of leadership, excellence in practice and caring in the nursing profession.The Purpose Statement of the School
The main purpose of the Phoenix University Nursing School is to educate its students into the best educational programs at the undergraduate and graduate levels that will help them in advancing their nursing profession (Breneman, 2006).Program Description
The Bachelors of Science in Nursing program at the University of Phoenix is a fully accredited program by the Commission of Collegiate Nursing Education. It has qualified to have a special progression for the Vocational Nurse/Practical Nurse which enables it to achieve the Bachelors of Science Degree (Olsen, 2002). The program mainly centers on skills, experiences of the practical nurse that are transitioning to the professional nursing role and also the basic education. The curriculum of this program has been founded upon a foundation of physical, social, and biological sciences that are mainly known for their contribution to the nursing science. The components of the liberal arts in this program such as cultural, intellectual, and social aspects serve as a tool of development. Finally, the main contents of the program will primarily focus on critical thinking, role transition, evidence-based practice, and advanced clinical skills (White, Baker, & Baker, 2003). All the graduates will undertake their final examination from the National Council Licensure Examination for Registered Nurses. The maximum total credits for the course is 120 while the l ...
Standardized Clinical Placement
Amanda Swenty
MSN-Learner
Walden University
NURS 6600
April 30, 2016
Introduction
Summary of Practicum Project Topic
Project Goals
Project Objectives
Rationale for Goals
Practicum Project Methodology
Practicum Project Findings
Conclusion
I would like to welcome the faculty and course members to this presentation of a topic that I am passionate about as a current faculty member. This project will explain in detail the need for a standardized placement tool for academic settings and hospitals to use.
2
Current difficulty placing students in the clinical setting
Limited sites for faculty led/preceptor led clinical
Disorganized Process of placement of students
Current placement is done individually by each site and it time intensive
Current process shows favoritism
Summary of Practicum Project Topic
As a former student I have felt the pains of placement for students in the clinical setting. As a faculty member I have been exposed to the difficulties that placing students has placed on the colleges and faculty, and the hospitals that host students. The difficulties are in the following areas:
Lack of qualified faculty willing to be flexible in unique clinical times (weekends/nights)
Poor communication between the school/hospital
Time extensive placement for current process ( School sends a request, hospitals wait for requests from all colleges before approving, placement approvals/denial sent back to college). This process can take up to months for a response.
Due to the poor communication sites are limited as managers don’t respond timely so sites go without students on site
The faculty from each college and placement coordinators from each hospital all meet monthly to discuss process. At this meeting it was discovered that one hospital places favoritism to the college associated with them and also the technical college as they have tenure with them. This makes fair placement an issue.
In the Greater Green Bay Healthcare Alliance meeting I presented the proposed topic for approval on April 8, 2016. The above listed issues were discussed and all members agreed to provide data to make placement a standardized process. All faculty and placement coordinators agree to provide all data available to create a useful tool that can be used by all members for student clinical placement.
3
Project Goals
Gather all necessary information to create an effective standardized placement tool
Create a standardized student placement tool
Presentation approved by the Greater Green Bay Health Care Alliance
Successful completion of this course to better prepare me for this advanced degree in nursing
The project goals that I have set for this project are related to the creation of a standardized tool that can be useful for academic setting and healthcare facilities to use to place students in the clinical setting. As listed in the introduction the current process lacks organization, standardiz.
Standardized Clinical Placement
Amanda Swenty
MSN-Learner
Walden University
NURS 6600
April 30, 2016
Introduction
Summary of Practicum Project Topic
Project Goals
Project Objectives
Rationale for Goals
Practicum Project Methodology
Practicum Project Findings
Conclusion
I would like to welcome the faculty and course members to this presentation of a topic that I am passionate about as a current faculty member. This project will explain in detail the need for a standardized placement tool for academic settings and hospitals to use.
2
Current difficulty placing students in the clinical setting
Limited sites for faculty led/preceptor led clinical
Disorganized Process of placement of students
Current placement is done individually by each site and it time intensive
Current process shows favoritism
Summary of Practicum Project Topic
As a former student I have felt the pains of placement for students in the clinical setting. As a faculty member I have been exposed to the difficulties that placing students has placed on the colleges and faculty, and the hospitals that host students. The difficulties are in the following areas:
Lack of qualified faculty willing to be flexible in unique clinical times (weekends/nights)
Poor communication between the school/hospital
Time extensive placement for current process ( School sends a request, hospitals wait for requests from all colleges before approving, placement approvals/denial sent back to college). This process can take up to months for a response.
Due to the poor communication sites are limited as managers don’t respond timely so sites go without students on site
The faculty from each college and placement coordinators from each hospital all meet monthly to discuss process. At this meeting it was discovered that one hospital places favoritism to the college associated with them and also the technical college as they have tenure with them. This makes fair placement an issue.
In the Greater Green Bay Healthcare Alliance meeting I presented the proposed topic for approval on April 8, 2016. The above listed issues were discussed and all members agreed to provide data to make placement a standardized process. All faculty and placement coordinators agree to provide all data available to create a useful tool that can be used by all members for student clinical placement.
3
Project Goals
Gather all necessary information to create an effective standardized placement tool
Create a standardized student placement tool
Presentation approved by the Greater Green Bay Health Care Alliance
Successful completion of this course to better prepare me for this advanced degree in nursing
The project goals that I have set for this project are related to the creation of a standardized tool that can be useful for academic setting and healthcare facilities to use to place students in the clinical setting. As listed in the introduction the current process lacks organization, standardiz.
Graduate Diploma of Nursing (Specialisation - Paediatric Nursing)Alindog01
Paediatric Nursing is an area of specialisation that has always been a popular choice among nurses. Paediatricnurses work closely with family doctors, paediatricians and
the healthcare team to give preventative and critical care to patients ranging in age from infancy to young adulthood. In addition to their medical competencies, paediatric
nurses must have a special warmth and ability to work with children. https://www.ihm.edu.au/courses
Doctor of Medicine (MD) program at Texila American University – College of Medicine (TAU-COM) is an undergraduate medical program.
The Doctor of Medicine program has the following:
Basic Sciences – 2 Years
Clinical Sciences – 2 Years
In the first two years, the basic medical sciences are taught in the context of their relevance to patient care. Later in the last two years of the program, clinical teaching builds upon and reinforces this strong scientific foundation.
Post-Doctoral Fellowship Course in Reproductive MedicineIVF Treatment
The reproductive Medicine Fellowship Program is a one-year intensive clinical training program that prepares candidates for advanced certification in Reproductive Endocrinology and Infertility.
The program is designed to help candidates manage complex reproductive and fertility issues competently using the most modern and up-to-date treatment procedures:
• Infertility.
• Male Infertility.
• Female Infertility.
• Combined Infertility factors.
• Reproductive technology.
• Reproductive surgery.
• Understanding of the third-party reproduction procedure.
• A rigorous research program in both basic and clinical reproductive sciences.
• biology.
NRS-493 Individual Success PlanREQUIRED PRACTICE HOURS 100 Direct.docxhoney725342
NRS-493 Individual Success Plan
REQUIRED PRACTICE HOURS: 100 Direct Clinical Experience (50 hours community/50 hours leadership) – 25 Indirect Clinical Experience Hours.
P
R
A
C
T
I
C
E
E
X
P
E
R
I
E
N
C
E
Complete Contact Information
Student Information
GCU
Name:
E-mail:
Phone Number:
Course Faculty Information
GCU
Name:
E-mail:
Phone Number:
Practicum Preceptor Information
Practice Setting
Name:
E-mail:
Phone Number:
ISP Instructions
Use this form to develop your Individual Success Plan (ISP) for NRS-493, the Professional Capstone and Practicum course. An individual success plan maps out what you, the RN-to-BSN student, needs to accomplish in order to be successful as you work through this course and complete your overall program of study. You will also share this with your preceptor at the beginning and end of this course so that he or she will know what you need to accomplish.
In this ISP, you will identify all of the objectives and assignments relating to the 100 direct clinical practice experience hours and the 25 indirect clinical practice hours you need to complete by the end of this course. Use this template to specify the date by which you will complete each assignment. Your plan should include a self-assessment of how you met all applicable GCU RN-to-BSN Domains & Competencies (see Appendix A). General Requirements
Use the following information to ensure successful completion of each assignment as it pertains to deliverables due in this course:
· Use the Individual Success Plan to develop a personal plan for completing your clinical practice experience hours and self-assess how you will meet the GCU RN-to-BSN University Mission Critical Competencies and the Programmatic Domains & Competencies (Appendix A) related to that course.
Show all of the major deliverables in the course, the topic/course objectives that apply to each deliverable, and lastly, align each deliverable to the applicable University Mission Critical Competencies and the course-specific Domains and Competencies (see Appendix A).
Completing your ISP does not earn clinical practice experience hours, nor does telephone conference time, or time spent with your preceptor.
· Within the Individual Success Plan, ensure you identify all graded course assignments and indirect clinical assignments listed in the table on the next page.
Topic
Graded Assignment
Indirect Clinical Assignments
Topic 1
1. Individual Success Plan
2. Reflection Journal Entry
1. List of potential topics for the change proposal
Topic 2
1. Topic Selection Approval Paper
2. Reflection Journal Entry
1. Search the literature for supporting journal articles
2. Summary of topic category; community or leadership
Topic 3
1. PICOT Question Paper
2. Reflection Journal Entry
1. List of objectives
Topic 4
1. Literature Evaluation Table
2. Reflection Journal Entry
1. List of measurable outcomes
Topic 5
1. Reflection Journal Entry
1. Summary of the strategic plan
2. Midterm E.
NRS-493 Individual Success PlanREQUIRED PRACTICE HOURS 100 Direct.docxgibbonshay
NRS-493 Individual Success Plan
REQUIRED PRACTICE HOURS: 100 Direct Clinical Experience (50 hours community/50 hours leadership) – 25 Indirect Clinical Experience Hours.
P
R
A
C
T
I
C
E
E
X
P
E
R
I
E
N
C
E
Complete Contact Information
Student Information
GCU
Name:
E-mail:
Phone Number:
Course Faculty Information
GCU
Name:
E-mail:
Phone Number:
Practicum Preceptor Information
Practice Setting
Name:
E-mail:
Phone Number:
ISP Instructions
Use this form to develop your Individual Success Plan (ISP) for NRS-493, the Professional Capstone and Practicum course. An individual success plan maps out what you, the RN-to-BSN student, needs to accomplish in order to be successful as you work through this course and complete your overall program of study. You will also share this with your preceptor at the beginning and end of this course so that he or she will know what you need to accomplish.
In this ISP, you will identify all of the objectives and assignments relating to the 100 direct clinical practice experience hours and the 25 indirect clinical practice hours you need to complete by the end of this course. Use this template to specify the date by which you will complete each assignment. Your plan should include a self-assessment of how you met all applicable GCU RN-to-BSN Domains & Competencies (see Appendix A). General Requirements
Use the following information to ensure successful completion of each assignment as it pertains to deliverables due in this course:
· Use the Individual Success Plan to develop a personal plan for completing your clinical practice experience hours and self-assess how you will meet the GCU RN-to-BSN University Mission Critical Competencies and the Programmatic Domains & Competencies (Appendix A) related to that course.
Show all of the major deliverables in the course, the topic/course objectives that apply to each deliverable, and lastly, align each deliverable to the applicable University Mission Critical Competencies and the course-specific Domains and Competencies (see Appendix A).
Completing your ISP does not earn clinical practice experience hours, nor does telephone conference time, or time spent with your preceptor.
· Within the Individual Success Plan, ensure you identify all graded course assignments and indirect clinical assignments listed in the table on the next page.
Topic
Graded Assignment
Indirect Clinical Assignments
Topic 1
1. Individual Success Plan
2. Reflection Journal Entry
1. List of potential topics for the change proposal
Topic 2
1. Topic Selection Approval Paper
2. Reflection Journal Entry
1. Search the literature for supporting journal articles
2. Summary of topic category; community or leadership
Topic 3
1. PICOT Question Paper
2. Reflection Journal Entry
1. List of objectives
Topic 4
1. Literature Evaluation Table
2. Reflection Journal Entry
1. List of measurable outcomes
Topic 5
1. Reflection Journal Entry
1. Summary of the strategic plan
2. Midterm E.
Mercer University College of Pharmacy and Health Sciences Physician Assistant Program Presentation presented at the PA Admissions Information Session on June 11, 2009.
Elementary CurriculaBoth articles highlight the fact that middle.docxtoltonkendal
Elementary Curricula
Both articles highlight the fact that middle-class students seem to benefit more from summer reading programs than their lower-SES peers. While we would hope that summer reading programs would have the same positive impact on all students, this information did not totally surprise me. Differences in funding, materials, and ability to recruit enough high-quality teachers for summer programs could be more difficult in lower-socioeconomic areas. In addition, the articles did not dive into other factors in the students’ lives that may be contributing to their performance such as attendance, how well-rested they are, trauma they have experiences that impacts their ability to focus during instruction, and the impact of being taught by a teacher who the students may not know or have a relationship with. Additionally, there could be a mismatch between the instructional practices and the specific needs of the students. Even though summer reading programs are only for a short time, I would challenge teachers to put energy into getting to know the students and building trust with them. This is a key foundation that is needed for learning to take place.
In challenging teachers during summer program and the regular school year to ”break out of the mold” to create better outcomes for students classified with low SES, in addition to building relationships with students, I would encourage them to build connections with their families. This may involve thinking outside the box and leaving their comfort zone. It could entail holding a parent-teacher conference off campus, closer to their home or in their community. It could also include providing resources and instructional videos to parents so they can help support their children at home. There are many parents who want to support their children academically, but they do not know how and may be uncomfortable asking the teacher for assistance. In addition, I would urge teachers to capitalize on the strengths and interests of their students to engage them in learning activities and provide them with opportunities to shine. We do not have to, and should not, be satisfied with the idea that low SES students will automatically not be able to perform. These students are capable of learning and growth just as much as any other student. I think data from test scores that demonstrate a gap between the performance of students classified as economically disadvantaged and not economically disadvantaged has led some people to hold the belief that students classified as low SES will not perform well. I think the way that school “report card” grades are published also perpetuates this belief, as it shows the test scores, but does not provide an explanation of or include any solutions for the many larger societal factors that contribute to those scores including high teacher turn over, lack of resources, child trauma, lack of sleep, lack of nutrition, crime & safety, and education level of parents.
It w.
Elementary Statistics (MATH220)
Assignment:
Statistical Project & Presentation
Purpose:
The purpose of this project is to supplement lecture material by having the students to do a case study on collecting, analyzing, and interpreting data.
***The best way to understand something is to experience it for yourself.
Guideline for Analyzing Data and Writing a Report
Below is a general outline of the topics that should be included in your report.
1.
Introduction.
State the topic of your study.
2.
Define Population.
Define the population that you intend for your study to represent.
3.
Define Variable.
Define clearly the variable that you obtained during your data collection; this should include information on how the variable is measured and what possible values this variable has.
4.
Data Collection.
Describe your data collection process, including your data source, your sampling strategy, and what steps you took to avoid bias.
5.
Study Design.
Describe the procedures you followed to analyze your data.
6.
Results: Descriptive Statistics.
Give the relevant descriptive statistics for the sample you collected.
7.
Results: Statistical Analysis.
Describe the results of your statistical analysis.
8.
Findings.
Interpret the results of your analysis in the context of your original research question. Was your hypothesis supported by your statistical analyses? Explain.
9.
Discussion.
What conclusions, if any, do you believe you can draw as a result of your study? If the results were not what you expected, what factors might explain your results? What did you learn from the project about the population you studied? What did you learn about the research variable? What did you learn about the specific statistical test you conducted?
.
More Related Content
Similar to Running head STUDENT MANUAL1STUDENT MANUAL11The.docx
Graduate Diploma of Nursing (Specialisation - Paediatric Nursing)Alindog01
Paediatric Nursing is an area of specialisation that has always been a popular choice among nurses. Paediatricnurses work closely with family doctors, paediatricians and
the healthcare team to give preventative and critical care to patients ranging in age from infancy to young adulthood. In addition to their medical competencies, paediatric
nurses must have a special warmth and ability to work with children. https://www.ihm.edu.au/courses
Doctor of Medicine (MD) program at Texila American University – College of Medicine (TAU-COM) is an undergraduate medical program.
The Doctor of Medicine program has the following:
Basic Sciences – 2 Years
Clinical Sciences – 2 Years
In the first two years, the basic medical sciences are taught in the context of their relevance to patient care. Later in the last two years of the program, clinical teaching builds upon and reinforces this strong scientific foundation.
Post-Doctoral Fellowship Course in Reproductive MedicineIVF Treatment
The reproductive Medicine Fellowship Program is a one-year intensive clinical training program that prepares candidates for advanced certification in Reproductive Endocrinology and Infertility.
The program is designed to help candidates manage complex reproductive and fertility issues competently using the most modern and up-to-date treatment procedures:
• Infertility.
• Male Infertility.
• Female Infertility.
• Combined Infertility factors.
• Reproductive technology.
• Reproductive surgery.
• Understanding of the third-party reproduction procedure.
• A rigorous research program in both basic and clinical reproductive sciences.
• biology.
NRS-493 Individual Success PlanREQUIRED PRACTICE HOURS 100 Direct.docxhoney725342
NRS-493 Individual Success Plan
REQUIRED PRACTICE HOURS: 100 Direct Clinical Experience (50 hours community/50 hours leadership) – 25 Indirect Clinical Experience Hours.
P
R
A
C
T
I
C
E
E
X
P
E
R
I
E
N
C
E
Complete Contact Information
Student Information
GCU
Name:
E-mail:
Phone Number:
Course Faculty Information
GCU
Name:
E-mail:
Phone Number:
Practicum Preceptor Information
Practice Setting
Name:
E-mail:
Phone Number:
ISP Instructions
Use this form to develop your Individual Success Plan (ISP) for NRS-493, the Professional Capstone and Practicum course. An individual success plan maps out what you, the RN-to-BSN student, needs to accomplish in order to be successful as you work through this course and complete your overall program of study. You will also share this with your preceptor at the beginning and end of this course so that he or she will know what you need to accomplish.
In this ISP, you will identify all of the objectives and assignments relating to the 100 direct clinical practice experience hours and the 25 indirect clinical practice hours you need to complete by the end of this course. Use this template to specify the date by which you will complete each assignment. Your plan should include a self-assessment of how you met all applicable GCU RN-to-BSN Domains & Competencies (see Appendix A). General Requirements
Use the following information to ensure successful completion of each assignment as it pertains to deliverables due in this course:
· Use the Individual Success Plan to develop a personal plan for completing your clinical practice experience hours and self-assess how you will meet the GCU RN-to-BSN University Mission Critical Competencies and the Programmatic Domains & Competencies (Appendix A) related to that course.
Show all of the major deliverables in the course, the topic/course objectives that apply to each deliverable, and lastly, align each deliverable to the applicable University Mission Critical Competencies and the course-specific Domains and Competencies (see Appendix A).
Completing your ISP does not earn clinical practice experience hours, nor does telephone conference time, or time spent with your preceptor.
· Within the Individual Success Plan, ensure you identify all graded course assignments and indirect clinical assignments listed in the table on the next page.
Topic
Graded Assignment
Indirect Clinical Assignments
Topic 1
1. Individual Success Plan
2. Reflection Journal Entry
1. List of potential topics for the change proposal
Topic 2
1. Topic Selection Approval Paper
2. Reflection Journal Entry
1. Search the literature for supporting journal articles
2. Summary of topic category; community or leadership
Topic 3
1. PICOT Question Paper
2. Reflection Journal Entry
1. List of objectives
Topic 4
1. Literature Evaluation Table
2. Reflection Journal Entry
1. List of measurable outcomes
Topic 5
1. Reflection Journal Entry
1. Summary of the strategic plan
2. Midterm E.
NRS-493 Individual Success PlanREQUIRED PRACTICE HOURS 100 Direct.docxgibbonshay
NRS-493 Individual Success Plan
REQUIRED PRACTICE HOURS: 100 Direct Clinical Experience (50 hours community/50 hours leadership) – 25 Indirect Clinical Experience Hours.
P
R
A
C
T
I
C
E
E
X
P
E
R
I
E
N
C
E
Complete Contact Information
Student Information
GCU
Name:
E-mail:
Phone Number:
Course Faculty Information
GCU
Name:
E-mail:
Phone Number:
Practicum Preceptor Information
Practice Setting
Name:
E-mail:
Phone Number:
ISP Instructions
Use this form to develop your Individual Success Plan (ISP) for NRS-493, the Professional Capstone and Practicum course. An individual success plan maps out what you, the RN-to-BSN student, needs to accomplish in order to be successful as you work through this course and complete your overall program of study. You will also share this with your preceptor at the beginning and end of this course so that he or she will know what you need to accomplish.
In this ISP, you will identify all of the objectives and assignments relating to the 100 direct clinical practice experience hours and the 25 indirect clinical practice hours you need to complete by the end of this course. Use this template to specify the date by which you will complete each assignment. Your plan should include a self-assessment of how you met all applicable GCU RN-to-BSN Domains & Competencies (see Appendix A). General Requirements
Use the following information to ensure successful completion of each assignment as it pertains to deliverables due in this course:
· Use the Individual Success Plan to develop a personal plan for completing your clinical practice experience hours and self-assess how you will meet the GCU RN-to-BSN University Mission Critical Competencies and the Programmatic Domains & Competencies (Appendix A) related to that course.
Show all of the major deliverables in the course, the topic/course objectives that apply to each deliverable, and lastly, align each deliverable to the applicable University Mission Critical Competencies and the course-specific Domains and Competencies (see Appendix A).
Completing your ISP does not earn clinical practice experience hours, nor does telephone conference time, or time spent with your preceptor.
· Within the Individual Success Plan, ensure you identify all graded course assignments and indirect clinical assignments listed in the table on the next page.
Topic
Graded Assignment
Indirect Clinical Assignments
Topic 1
1. Individual Success Plan
2. Reflection Journal Entry
1. List of potential topics for the change proposal
Topic 2
1. Topic Selection Approval Paper
2. Reflection Journal Entry
1. Search the literature for supporting journal articles
2. Summary of topic category; community or leadership
Topic 3
1. PICOT Question Paper
2. Reflection Journal Entry
1. List of objectives
Topic 4
1. Literature Evaluation Table
2. Reflection Journal Entry
1. List of measurable outcomes
Topic 5
1. Reflection Journal Entry
1. Summary of the strategic plan
2. Midterm E.
Mercer University College of Pharmacy and Health Sciences Physician Assistant Program Presentation presented at the PA Admissions Information Session on June 11, 2009.
Elementary CurriculaBoth articles highlight the fact that middle.docxtoltonkendal
Elementary Curricula
Both articles highlight the fact that middle-class students seem to benefit more from summer reading programs than their lower-SES peers. While we would hope that summer reading programs would have the same positive impact on all students, this information did not totally surprise me. Differences in funding, materials, and ability to recruit enough high-quality teachers for summer programs could be more difficult in lower-socioeconomic areas. In addition, the articles did not dive into other factors in the students’ lives that may be contributing to their performance such as attendance, how well-rested they are, trauma they have experiences that impacts their ability to focus during instruction, and the impact of being taught by a teacher who the students may not know or have a relationship with. Additionally, there could be a mismatch between the instructional practices and the specific needs of the students. Even though summer reading programs are only for a short time, I would challenge teachers to put energy into getting to know the students and building trust with them. This is a key foundation that is needed for learning to take place.
In challenging teachers during summer program and the regular school year to ”break out of the mold” to create better outcomes for students classified with low SES, in addition to building relationships with students, I would encourage them to build connections with their families. This may involve thinking outside the box and leaving their comfort zone. It could entail holding a parent-teacher conference off campus, closer to their home or in their community. It could also include providing resources and instructional videos to parents so they can help support their children at home. There are many parents who want to support their children academically, but they do not know how and may be uncomfortable asking the teacher for assistance. In addition, I would urge teachers to capitalize on the strengths and interests of their students to engage them in learning activities and provide them with opportunities to shine. We do not have to, and should not, be satisfied with the idea that low SES students will automatically not be able to perform. These students are capable of learning and growth just as much as any other student. I think data from test scores that demonstrate a gap between the performance of students classified as economically disadvantaged and not economically disadvantaged has led some people to hold the belief that students classified as low SES will not perform well. I think the way that school “report card” grades are published also perpetuates this belief, as it shows the test scores, but does not provide an explanation of or include any solutions for the many larger societal factors that contribute to those scores including high teacher turn over, lack of resources, child trauma, lack of sleep, lack of nutrition, crime & safety, and education level of parents.
It w.
Elementary Statistics (MATH220)
Assignment:
Statistical Project & Presentation
Purpose:
The purpose of this project is to supplement lecture material by having the students to do a case study on collecting, analyzing, and interpreting data.
***The best way to understand something is to experience it for yourself.
Guideline for Analyzing Data and Writing a Report
Below is a general outline of the topics that should be included in your report.
1.
Introduction.
State the topic of your study.
2.
Define Population.
Define the population that you intend for your study to represent.
3.
Define Variable.
Define clearly the variable that you obtained during your data collection; this should include information on how the variable is measured and what possible values this variable has.
4.
Data Collection.
Describe your data collection process, including your data source, your sampling strategy, and what steps you took to avoid bias.
5.
Study Design.
Describe the procedures you followed to analyze your data.
6.
Results: Descriptive Statistics.
Give the relevant descriptive statistics for the sample you collected.
7.
Results: Statistical Analysis.
Describe the results of your statistical analysis.
8.
Findings.
Interpret the results of your analysis in the context of your original research question. Was your hypothesis supported by your statistical analyses? Explain.
9.
Discussion.
What conclusions, if any, do you believe you can draw as a result of your study? If the results were not what you expected, what factors might explain your results? What did you learn from the project about the population you studied? What did you learn about the research variable? What did you learn about the specific statistical test you conducted?
.
Elements of Religious Traditions PaperWritea 700- to 1,050-word .docxtoltonkendal
Elements of Religious Traditions Paper
Write
a 700- to 1,050-word paper that does the following:
Describes these basic components of religious traditions and their relationship to the sacred
:
What a religious tradition says—its teachings, texts, doctrine, stories, myths, and others
What a religious tradition does—worship, prayer, pilgrimage, ritual, and so forth
How a religious tradition organizes—leadership, relationships among members, and so forth
Identifies key critical issues in the study of religion.
Includes specific examples from the various religious traditions described in the Week One readings that honor the sacred—such as rituals of the Igbo to mark life events, the vision quest as a common ritual in many Native American societies, or the influence of the shaman as a leader. You may also include examples from your own religious tradition or another religious tradition with which you are familiar.
Format
your paper consistent with APA guidelines
.
Elements of MusicPitch- relative highness or lowness that we .docxtoltonkendal
Elements of Music
Pitch- relative highness or lowness that we hear in a sound.
Tone- sound that has a definite pitch.
(For example striking a bat against a ball does not produce a D# but striking a D#
on a piano does)
Dynamics- the degree of loudness or softness in music
pp pianissimo /very soft
p piano /soft
mp mezzo-piano /medium-soft
mf mezzo-forte /medium-loud
f forte /loud
ff fortissimo /very loud
When dynamics are altered in a piece of music, they are termed as follows:
decrescendo/ diminuendo gradually softer
crescendo gradually louder
Timbre/Tone Color- the character or quality of a sound.
dark, bright, mellow, cool, metallic, rich, brilliant, thin, etc.
Rhythm- a) the flow (or pattern) of music through time. b) the particular arrangement of
note lengths in a piece of music.
Syncopation- An accent placed on a beat where it is not normally expected.
Beat- the steady pulse in a piece of music.
Downbeat- the first or stressed beat of a measure.
Meter- the pattern in which beats are organized within a piece of music.
Examples:
3/4= three beats per measure
4/4= four beats per measure
6/8= six beats per measure
*In some musics, meter is not present- this is termed non-metric.
(Ex: Chant, some 20th century genres, world musics).
Melody- a series of single notes that add up to a recognizable whole.
*A melodic line has a shape -it ascends and descends in a series of continuous pitches.
Sequence- a repetition of a pattern at a higher or lower pitch.
Phrase- A short unit of music within a melodic line.
Cadence- The rest at the end of a musical phrase. Think of this as a musical period at the
end of a sentence.
Harmony- A) How chords are constructed and how they follow each other. B) The
relationship of tones when sounded in a group.
Chord- a combination of three or more tones sounded at once.
Consonance- a stable tone combination in a chord
Dissonance- and unstable tone combination in a chord; usually, an expected
and stable resolution will follow.
Tonic- a) the main key of a piece of music. b) the first note of a scale
Key- the central tone or scale in a piece of music.
(example: A major, b minor)
Modulation- a shift from one key to another within the same piece of music.
Texture- layering of musical sounds or instruments within a piece of music.
Monophonic- single, unaccompanied melodic line.
Homophonic- a melody with an accompaniment of chords.
Polyphonic- th.
Elevated Blood Lead Levels in Children AssociatedWith the Fl.docxtoltonkendal
Elevated Blood Lead Levels in Children Associated
With the Flint Drinking Water Crisis: A Spatial
Analysis of Risk and Public Health Response
Mona Hanna-Attisha, MD, MPH, Jenny LaChance, MS, Richard Casey Sadler, PhD, and Allison Champney Schnepp, MD
Objectives. We analyzed differences in pediatric elevated blood lead level incidence
before and after Flint, Michigan, introduced a more corrosive water source into an aging
water system without adequate corrosion control.
Methods. We reviewed blood lead levels for children younger than 5 years before
(2013) and after (2015) water source change in Greater Flint, Michigan. We assessed the
percentage of elevated blood lead levels in both time periods, and identified geo-
graphical locations through spatial analysis.
Results. Incidence of elevated blood lead levels increased from 2.4% to 4.9% (P < .05)
after water source change, and neighborhoods with the highest water lead levels ex-
perienced a 6.6% increase. No significant change was seen outside the city. Geospatial
analysis identified disadvantaged neighborhoods as having the greatest elevated blood
lead level increases and informed response prioritization during the now-declared public
health emergency.
Conclusions. The percentage of children with elevated blood lead levels increased
after water source change, particularly in socioeconomically disadvantaged neighbor-
hoods. Water is a growing source of childhood lead exposure because of aging infra-
structure. (Am J Public Health. 2016;106:283–290. doi:10.2105/AJPH.2015.303003)
See also Rosner, p. 200.
In April 2014, the postindustrial city ofFlint, Michigan, under state-appointed
emergency management, changed its water
supply from Detroit-supplied Lake Huron
water to the Flint River as a temporary
measure, awaiting a new pipeline to Lake
Huron in 2016. Intended to save money, the
change in source water severed a half-
century relationship with the Detroit Water
and Sewage Department. Shortly after the
switch to Flint River water, residents voiced
concerns regarding water color, taste, and
odor, and various health complaints in-
cluding skin rashes.1 Bacteria, including
Escherichia coli, were detected in the distri-
bution system, resulting in Safe Drinking
Water Act violations.2 Additional disinfec-
tion to control bacteria spurred formation of
disinfection byproducts including total tri-
halomethanes, resulting in Safe Drinking
Water Act violations for trihalomethane
levels.2
Water from the Detroit Water and
Sewage Department had very low corrosivity
for lead as indicated by low chloride, low
chloride-to-sulfate mass ratio, and presence
of an orthophosphate corrosion inhibitor.3,4
By contrast, Flint River water had high
chloride, high chloride-to-sulfate mass ratio,
and no corrosion inhibitor.5 Switching
from Detroit’s Lake Huron to Flint River
water created a perfect storm for lead leach-
ing into drinking water.6 The aging Flint
water distribution system contains a hig.
Elements of the Communication ProcessIn Chapter One, we learne.docxtoltonkendal
Elements of the Communication Process
In Chapter One, we learned communication is the process of creating or sharing meaning in informal conversation, group interaction, or public speaking. To understand how the process works, we described the essential elements in the process.
For the following interaction, identify the contexts, participants, channels. message, interference (noise), and feedback.
"Maria and Damien are meandering through the park, talking and drinking bottled water. Damien finishes his bottle, replaces the lid, and tosses the bottle into the bushes at the side of the path. Maria, who has been listening to Damien talk, comes to a stop, puts her hand on her hips, stares at Damien, and says angrily, " I can't believe what you just did! Damien blushes, averts his gaze, and mumbles, "Sorry, I'll get it- I just wasn't thinking." As the tension drains from Maria's face. she gives her head a playful toss, smiles, and says, Well, just see that it doesn't happen again.
1. Contexts
a. Physical
b. Social
c. Historical
d. Psychological
2. Participants
3. Channels
4. Message
5. Interference (Noise)
6. Feedback
.
Elements of Music #1 Handout1. Rhythm the flow of music in te.docxtoltonkendal
Elements of Music #1 Handout
1. Rhythm
the flow of music in terms of time
2. Beat
the pulse that recurs regularly in music
3. Meter
the regular pattern of stressed and unstressed beats
4. Tempo
the speed of the beats in a piece of music
5. Polyrhythm
two or more rhythm patterns occurring simultaneously
6. Pitch
the perceived highness or lowness of a musical sound
7. Melody
a series of consecutive pitches that form a cohesive musical entity
8. Counterpoint
two or more independent lines with melodic character occurring at the same time
9. Harmony
the simultaneous sounds of several pitches, usually in accompanying a melody
10. Dynamics
the amount of loudness in music
11. Timbre
tone quality or tone color in music
12. Form
the pattern or plan of a musical work
Framework for Improving
Critical Infrastructure Cybersecurity
Version 1.1
National Institute of Standards and Technology
April 16, 2018
April 16, 2018 Cybersecurity Framework Version 1.1
This publication is available free of charge from: https://doi.org/10.6028/NIST.CSWP.04162018 ii
No t e t o Rea d er s o n t h e U p d a t e
Version 1.1 of this Cybersecurity Framework refines, clarifies, and enhances Version 1.0, which
was issued in February 2014. It incorporates comments received on the two drafts of Version 1.1.
Version 1.1 is intended to be implemented by first-time and current Framework users. Current
users should be able to implement Version 1.1 with minimal or no disruption; compatibility with
Version 1.0 has been an explicit objective.
The following table summarizes the changes made between Version 1.0 and Version 1.1.
Table NTR-1 - Summary of changes between Framework Version 1.0 and Version 1.1.
Update Description of Update
Clarified that terms like
“compliance” can be
confusing and mean
something very different
to various Framework
stakeholders
Added clarity that the Framework has utility as a structure and
language for organizing and expressing compliance with an
organization’s own cybersecurity requirements. However, the
variety of ways in which the Framework can be used by an
organization means that phrases like “compliance with the
Framework” can be confusing.
A new section on self-
assessment
Added Section 4.0 Self-Assessing Cybersecurity Risk with the
Framework to explain how the Framework can be used by
organizations to understand and assess their cybersecurity risk,
including the use of measurements.
Greatly expanded
explanation of using
Framework for Cyber
Supply Chain Risk
Management purposes
An expanded Section 3.3 Communicating Cybersecurity
Requirements with Stakeholders helps users better understand
Cyber Supply Chain Risk Management (SCRM), while a new
Section 3.4 Buying Decisions highlights use of the Framework
in understanding risk associated with commercial off-the-shelf
products and services. Additional Cyber SCRM criteria we.
Elements of Music Report InstrumentsFor the assignment on the el.docxtoltonkendal
Elements of Music Report Instruments
For the assignment on the elements of music, students will write a report with a minimum of 300 words.
Students must select one element of music that they consider to be the most important element:
Melody
Rhythm
Harmony
Form
When writing the report, be sure you address the following questions:
Why did you select this element from among all the rest?
Do you think that all kinds of music could exist without your selected element? Elaborate on your view.
Describe a piece of music that highlights the use of your selected element.
I encourage students do research on their element of music in order to get ideas for their reports. All reports must be original works!
Do not quote any source or anybody’s thoughts. Quotes are not permitted in this Instruments Report. I am interested in your own personal thoughts, opinions, and the material you have learned from your research.
.
Elements of GenreAfter watching three of the five .docxtoltonkendal
Elements of Genre
After watching three of the five movie clips listed in the
Multimedia
section, above, describe how they fit into a specific genre (or subgenre) as explained in the text. What elements of the film are characteristic of that genre? How does it fulfill the expectations of that genre? How does it play against these expectations?
Your initial post should be at least 150 words in length. Support your claims with examples from required material(s) and/or other scholarly resources, and properly cite any references.
.
Elements of DesignDuring the process of envisioning and designing .docxtoltonkendal
Elements of Design
During the process of envisioning and designing a film, the director, production designer, and art director (in collaboration with the cinematographer) are concerned with several major spatial and temporal elements. These design elements punctuate and underscore the movement of figures within the frame, including the following: setting, lighting, costuming, makeup, and hairstyles. Choose a scene from movieclips.com. In a three to five page paper, (excluding the cover and reference pages) analyze the mise-en-scène.
Respond to the following prompts with at least one paragraph per bulleted topic:
Identify the names of the artists involved in the film’s production: the director, the production designer, and the art director. Describe in separate paragraphs each artist’s role in the overall design process. Conduct additional research if necessary, citing your book, film, and other external sources correctly in APA format.
Explain how the artists utilize lighting in the scene. How does the lighting affect our emotional understanding of certain characters? What sort of mood does the lighting evoke? How does lighting impact the overall story the filmmaker is attempting to tell?
Describe the setting, including the time period, location, and culture in which the film takes place.
Explain what costuming can tell us about a character. In what ways can costuming be used to reflect elements of the film's plot?
Explain how hairstyle and makeup can help tell the story. What might hairstyle and makeup reveal about the characters?
Discuss your opinion regarding the mise-en-scène. Do the elements appear to work together in a harmonious way? Does the scene seem discordant? Do you think the design elements are congruent with the filmmaker’s vision for the scene?
.
Elements of Critical Thinking [WLOs 2, 3, 4] [CLOs 2, 3, 4]P.docxtoltonkendal
Elements of Critical Thinking [WLOs: 2, 3, 4] [CLOs: 2, 3, 4]
Prepare:
Prior to beginning work on this discussion forum, in preparation for discussing the importance of critical thinking skills,
Read the articles
Common Misconceptions of Critical Thinking
Combating Fake News in the Digital Age
6 Critical Thinking Skills You Need to Master Now (Links to an external site.)
Teaching and Learning in a Post-Truth world: It’s Time for Schools to Upgrade and Reinvest in Media Literacy Lessons
Critical Thinking and the Challenges of Internet (Links to an external site.)
Watch the videos
Fake News: Part 1 (Links to an external site.)
Critical Thinking
(Links to an external site.)
Review the resources
Critical Thinking Skills (Links to an external site.)
Valuable Intellectual Traits (Links to an external site.)
Critical Thinking Web (Links to an external site.)
Reflect:
Reflect on the characteristics of a critical thinker. Critical thinking gets you involved in a dialogue with the ideas you read from others in this class. To be a critical thinker, you need to be able to summarize, analyze, hypothesize, and evaluate new information that you encounter.
Write:
For this discussion, you will address the following prompts. Keep in mind that the article or video you’ve chosen should not be about critical thinking, but should be about someone making a statement, claim, or argument related to your Final Paper topic. One source should demonstrate good critical thinking skills and the other source should demonstrate the lack or absence of critical thinking skills. Personal examples should not be used.
Explain at least five elements of critical thinking that you found in the reading material.
Search the Internet, media, or the Ashford University Library, and find an example in which good critical thinking skills are being demonstrated by the author or speaker. Summarize the content and explain why you think it demonstrates good critical thinking skills.
Search the Internet, media, or the Ashford University Library, and find an example in which the author or speaker lacks good critical thinking skills. Summarize the content and explain why you think it demonstrates the absence of good, critical thinking skills.
Your initial post should be at least 250 words in length, which should include a thorough response to each prompt. You are required to provide in-text citations of applicable required reading materials and/or any other outside sources you use to support your claims. Provide full reference entries of all sources cited at the end of your response. Please use correct APA format when writing in-text citations (see
In-Text Citation Helper (Links to an external site.)
) and references (see
Formatting Your References List (Links to an external site.)
).
Reflecting on General Education and Career [WLOs: 2, 3, 4] [CLOs: 2, 3, 4]
Prepare:
Prior to beginning work on this discussion forum, read the articles
Teaching Writing S.
Elements of DesignDuring the process of envisioning and design.docxtoltonkendal
Elements of Design
During the process of envisioning and designing a film, the director, production designer, and art director (in collaboration with the cinematographer) are concerned with several major spatial and temporal elements. These design elements punctuate and underscore the movement of figures within the frame, including the following: setting, lighting, costuming, makeup, and hairstyles. Choose a scene from movieclips.com. In a three to five page paper, (excluding the cover and reference pages) analyze the mise-en-scène.
Respond to the following prompts with at least one paragraph per bulleted topic:
Identify the names of the artists involved in the film’s production: the director, the production designer, and the art director. Describe in separate paragraphs each artist’s role in the overall design process. Conduct additional research if necessary, citing your book, film, and other external sources correctly in APA format.
Explain how the artists utilize lighting in the scene. How does the lighting affect our emotional understanding of certain characters? What sort of mood does the lighting evoke? How does lighting impact the overall story the filmmaker is attempting to tell?
Describe the setting, including the time period, location, and culture in which the film takes place.
Explain what costuming can tell us about a character. In what ways can costuming be used to reflect elements of the film's plot?
Explain how hairstyle and makeup can help tell the story. What might hairstyle and makeup reveal about the characters?
Discuss your opinion regarding the mise-en-scène. Do the elements appear to work together in a harmonious way? Does the scene seem discordant? Do you think the design elements are congruent with the filmmaker’s vision for the scene?
.
Elements of a contact due 16 OctRead the Case Campbell Soup Co. v..docxtoltonkendal
Elements of a contact due 16 Oct
Read the Case Campbell Soup Co. v. Wentz in the text. Answer the following questions:
1. What were the terms of the contract between Campbell and the Wentzes?
2. Did the Wentzes perform under the contract?
3. Did the court find specific performance to be an adequate legal remedy in this case?
4. Why did the court refuse to help Campbell in enforcing its legal contract?
5. How could Campbell change its contract in the future so as to avoid the unconsionability problem?
Facts:
Per
a
written
contract
between
Campbell
Soup
Company
(a
New
Jersey
company)
and
the
Wentzes
(carrot
farmers
in
Pennsylvania),
the
Wentzes
would
deliver
to
Campbell
all
the
Chantenay
red
cored
carrots
to
be
grown
on
the
Wentz
farm
during
the
1947
season.
The
contract
price
for
the
carrots
was
$30
per
ton.
The
contract
between
Campbell
Soup
and
all
sellers
of
carrots
was
drafted
by
Campbell
and
it
had
a
provision
that
prohibited
farmers/sellers
from
selling
their
carrots
to
anyone
else,
except
those
carrots
that
were
rejected
by
Campbell.
The
contract
also
had
a
liquidated
damages
provision
of
$50
per
ton
if
the
seller
breached,
but
it
had
no
similar
provision
in
the
event
Campbell
breached.
The
contract
not
only
allowed
Campbell
to
reject
nonconforming
carrots,
but
gave
Campbell
the
right
to
determine
who
could
buy
the
carrots
it
had
rejected.
The
Wentzes
harvested
100
tons
of
carrots,
but
because
the
market
price
at
the
time
of
harvesting
was
$90
per
ton
for
these
rare
carrots,
the
Wentzes
refused
to
deliver
them
to
Campbell
and
sold
62
tons
of
their
carrots
to
a
farmer
who
sold
some
of
those
carrots
to
Campbell.
Campbell
sued
the
Wentzes,
asking
for
the
court's
order
to
stop
further
sale
of
the
contracted
carrots
to
others
and
to
compel
specific
performance
of
the
contract.
The
trial
court
ruled
for
the
Wentzes
and
Campbell
appealed.
Issues:
Is
specific
performance
an
appropriate
legal
remedy
in
this
case
or
is
the
contract
unconscionable?
Discussion:
In
January
1948,
it
was
virtually
impossible
to
obtain
Chantenay
carrots
in
the
open
market.
Campbell
used
Chantenay
carrots
(which
are
easier
to
process
for
soup
making
than
other
carrots)
in
large
quantities
and
furnishes
the
seeds
to
farmers
with
whom
it
contracts.
Campbell
contracted
for
carrots
long
ahead,
and
farmers
entered
into
the
contract
willingly.
If
the
facts
of
this
case
were
this
simple,
specific
performance
should
have
been
granted.
However,
the
problem
is
with
the
contract
itself,
which
was
one-sided.
According
to
the
appellate
court,
the
most
direct
example
of
unconscionability
was
the
provision
that,
under
certain
.
Elements for analyzing mise en sceneIdentify the components of.docxtoltonkendal
Elements for analyzing mise en scene
Identify the components of the shot, but explaining the meaning or significance behind those components and connecting the shot to the themes of the film
1. Dominant: Where is the eye attracted first? Why?
2. Lighting key: High key? Low key? High contrast? Some combination of these?
3. Shot and camera proxemics: What type of shot? How far away is the camera from the action?
4. Angle: Is the viewer (through the eye of the camera) looking up or down on the subject? Or is the camera neutral (eye level)?
5. Color values: What is the dominant color? Are there contrasting foils? Is there color symbolism?
6. Lens/filter/stock: How do these distort or comment on the
photographed materials?
7. Subsidiary contrasts: What are the main eye-stops after taking in the dominant?
8. Density: How much visual information is packed into the image? Is the texture stark, moderate, or highly detailed?
9. Composition: How is the two-dimensional space segmented and organized? What is the underlying design?
10. Form: Open or closed? Does the image suggest a window that arbitrarily isolates a fragment of the scene? Or a proscenium arch, in which the visual elements are carefully arranged and held in balance?
11. Framing: Tight or loose? Do characters have little to no room to move, or can they move freely without impediments?
12. Depth: On how many planes is the image composed? Does the background or foreground comment in any way on the midground?
13. Character placement: What part of the framed space do the characters occupy? Center? Top? Bottom? Edges? Why?
14. Staging positions: Which way do the characters look vis-à-vis the camera?
15. Character proxemics: How much space is between the
characters?
What are the 4 distinct formal elements that make up a film's mise en scene?
• staging of the action
• physical setting and decor
• the manner in which these materials are framed
• the manner in which they are photographed
.
Elements in the same row have the same number of () levelsWhi.docxtoltonkendal
Elements in the same row have the same number of (*) levels
Which elements in B O U L A N would be in the same family? Which would have the same number of energy levels? Highest mass? Lowest mass?
Which is more reactive? Uranium or Lithium
Will elements B and U lose electrons in a chemical reactor?
Will elements B and U form positive or negative ions?
Thanks so much (:
.
ELEG 421 Control Systems Transient and Steady State .docxtoltonkendal
ELEG 421
Control Systems
Transient and Steady State
Response Analyses
Dr. Ashraf A. Zaher
American University of Kuwait
College of Arts and Science
Department of Electrical and Computer Engineering
Layout
2
Objectives
This chapter introduces the analysis of the time response of different
control systems under different scenarios. Only first and second order
systems will be considered in details using analytical and numerical
methods. Extension to higher order systems will be developed. Both
transient and steady state responses will be evaluated. Stability analysis
will be analyzed for different kinds of feedback, while investigating the
effect of both proportional and derivative control actions on the
performance of the closed-loop system. Finally systems types and
steady state errors will be calculated for unity feedback.
Outcomes
By the end of this chapter, students will be able to:
evaluate both transient/steady state responses for control systems,
analyze the stability of closed-loop LTI systems,
investigate the effect of P and I control actions on performance, and
understand dominant dynamics of higher order systems.
Dr. Ashraf Zaher
Introduction
3
Test signals
Transient response
Steady state response
Analytical techniques, and
Numerical (simulation) techniques.
Stability (definition and analysis methods),
Relative stability, and
Effect of P/I control actions on stability and performance.
Summary of the used systems:
First order systems,
Second order systems, and
Higher order systems.
Dr. Ashraf Zaher
Test Signals
4 Dr. Ashraf Zaher
Impulse function:
Used to simulate shock inputs,
Laplace transform: 1.
Step function:
Used to simulate sudden disturbances,
Laplace transform: 1/s.
Ramp function:
Used to simulate gradually changing inputs,
Laplace transform: 1/s2.
Sinusoidal function(s):
Used to test response to a certain frequency,
Laplace transform: s/(s2+ω2) for cos(ωt) and ω/(s2+ω2) for sin(ωt).
White noise function:
Used to simulate random noise,
It is a stochastic signal that is easier to deal with in the time domain.
Total response:
C(s) = R(s)*TF(s) = Ctr(s) + Css(s) → c(t) = ctr(t) + css(t)
Fundamentals
5 Dr. Ashraf Zaher
Definitions:
Zeros (Z) of the TF
Poles (P) of the TF
Transient Response (Natural)
Steady State Response (Forced)
Total Response
Limits:
Initial values
Final values
Systems (?Zs):
First order (one P)
Second order (two Ps)
Higher order!
More:
Stability and relative stability
Steady state errors (unity feedback)
First Order Systems
6 Dr. Ashraf Zaher
TF:
T: time constant
Unit Step Response:
1
1
)(
)(
+
=
TssR
sC
)/1(
11
1
1
1
11
)(
TssTs
T
sTss
sC
+
−=
+
−=
+
=
Ttetc /1)( −−=
632.01)( 1 =−== −eTtc
T
e
Tdt
tdc Tt
t
11)( /
0
== −
=
01)0( 0 =−== etc
11)( =−=∞= −∞etc
First Order Systems.
Element 010 ASSIGNMENT 3000 WORDS (100)Task Individual assign.docxtoltonkendal
Element 010 ASSIGNMENT: 3000 WORDS (100%)
Task: Individual assignment (3000 words)
Weighting: 100%
Assessment Case Study:
Greenland Garden Centre
[1]
Jon Smith spread his arms widely as he surveyed his garden centre.
‘Of course the whole market for leisure products and services, especially garden-related products, has been expanding over the last few years. Even so, we have been particularly successful. Partly this is because we are conveniently located, but it is also because we have developed a reputation for excellent service. Customers like coming to us for advice. We have also been successful in attracting some of the ‘personality gardeners’ from television to make special appearances. My main ambition now is to fully develop all of our twelve hectares to make the centre a place people will want to visit in its own right. I envisage the centre developing into almost a mini gardening theme park with special gardens, beautiful grounds and special events.’
Greenland is a large village situated in the Cotswolds, a popular tourist area of the UK. It has an interesting range of shops and restaurants, mainly catering for the tourist trade. About half a mile outside the village is the Greenland Garden Centre. The garden centre is served by a good network of main roads but is inaccessible by public transport.
Growth over the last five years has been dramatic and the garden centre now sells many other goods as well as gardening requisites. It also has a restaurant. It is open seven days a week, only closing on Christmas Day. Its opening hours are Monday– Saturday 9 a.m. to 6 p.m. and Sunday 10 a.m. to 5 p.m. all year round.
Outside the centre
The centre has a large car park which can accommodate about 350 cars. Outside the entrance a map indicates the various areas in the garden centre. Most customers walk round the grounds before making their purchases. The length of time people spend in the centre varies but, according to a recent study, averages 53 minutes during the week and 73 minutes at weekends.
The same study shows the extent to which the number of customers arriving at the garden centre varies depending on the time of year, day of the week, and time of day. There are two peaks in customer numbers, one during the late spring/early summer period and another in the build up to Christmas, as Greenland puts on particularly good Christmas displays.
Indoor sales area
The range of goods has increased dramatically over the past few years and now includes items such as:
pets and aquatics
seeds
fertilisers
indoor pots and plants
gardening equipment
garden lighting
conservatory-style furniture
outdoor clothing
picture gallery
books and toys
delicatessen
wine
kitchen equipment
soft furnishing
outdoor eating equipment
gifts, stationery, cards, aromatherapy products
freshly cut flowers
dried flowers.
Outside sales area
In the open air and in large glasshouses there is a complete range of plants, shrubs and trees. Gre.
ELEG 320L – Signals & Systems Laboratory Dr. Jibran Khan Yous.docxtoltonkendal
ELEG 320L – Signals & Systems Laboratory /Dr. Jibran Khan Yousafzai Lab 4
1
LAB 4: CONVOLUTION
Background & Concepts
Convolution is denoted by:
𝑦[𝑛] = 𝑥[𝑛] ∗ ℎ[𝑛]
Your book has described the "flip and shift" method for performing convolution. First, we
set up two signals 𝑥[𝑘] and ℎ[𝑘]:
Flip one of the signals, say ℎ[𝑘], to form ℎ[−𝑘]:
ELEG 320L – Signals & Systems Laboratory /Dr. Jibran Khan Yousafzai Lab 4
2
Shift ℎ[−𝑘] by n to form ℎ[𝑛 − 𝑘]. For each value of 𝑛, form 𝑦[𝑛] by multiplying and
summing all the element of the product of𝑥[𝑘]ℎ[𝑛 − 𝑘], −∞ < 𝑘 < ∞. The figure
below shows an example of the calculation of𝑦[1]. The top panel shows𝑥[𝑘]. The
middle panel showsℎ[1 − 𝑘]. The lower panel shows𝑥[𝑘]𝑦[1 − 𝑘]. Note that this is a
sequence on a 𝑘 axis. The sum of the lower sequence over all k gives 𝑦[1] = 2.
We repeat this shifting, multiplication and summing for all values of 𝑛 to get the
complete sequence 𝑦[𝑛]:
ELEG 320L – Signals & Systems Laboratory /Dr. Jibran Khan Yousafzai Lab 4
3
The conv Command
conv(x,h) performs a 1-D convolution of vectors 𝑥 and ℎ. The resulting vector 𝑦
has length length(𝑦) = length(𝑥) + length(ℎ) − 1. Imagine vector 𝑥 as being
stationary and the flipped version of ℎ is slid from left to right. Note that conv(x,h) =
conv(h,x). An example of the convolution of two signals and plotting the result is
below:
>> x = [0.5 0.5 0.5]; %define input signal x[n]
>> h = [3.0 2.0 1.0]; %unit-pulse response h[n]
>> y = conv(x,h); %compute output y[n] via convolution
>> n = 0:(length(y)-1); %for plotting y[n]
>> stem(n,y) % plot y[n]
>> grid;
>> xlabel('n');
>> ylabel('y[n]');
>> title('Output of System via Convolution');
ELEG 320L – Signals & Systems Laboratory /Dr. Jibran Khan Yousafzai Lab 4
4
Deconvolution
The command [q,r] = deconv(v,u), deconvolves vector u out of vector v, using long
division. The quotient is returned in vector q and the remainder in vector r such that
v = conv(u,q)+r. If u and v are vectors of polynomial coefficients, convolving them is
equivalent to multiplying the two polynomials, and deconvolution is polynomial
division. The result of dividing v by u is quotient q and remainder r. An examples is
below:
If
>> u = [1 2 3 4];
>> v = [10 20 30];
The convolution is:
>> c = conv(u,v)
c =
10 40 100 160 170 120
Use deconvolution to recover v.
>> [q,r] = deconv(c,u)
q =
10 20 30
r =
0 0 0 0 0 0
This gives a quotient equal to v and a zero remainder.
Structures
Structures in Matlab are just like structures in C. They are basically containers that
allow one
Electronic Media PresentationChoose two of the following.docxtoltonkendal
Electronic Media Presentation
Choose
two of the following types of electronic media:
Radio
Sound recording
Motion pictures
Broadcast television
Research
the history of the media types your team selected. Include the following information in your presentation:
Introduction
Notable founders and parent organizations of your electronic media types
Notable historical dates
Dates of mergers with other radio stations, record production companies, motion picture companies, or television networks to form a large media conglomerate
Date the media types launched their websites, became active on the Internet, or became active in social media integration
Identify past, present, and future challenges confronting these types of media. How has the digital era affected them? Which types are best suited to adapt to the future? Explain why
How do these challenges affect advertising in these organizations--outside companies advertising--and advertising for these media--companies promoting themselves to others? What are innovative advertising strategies these media have engaged in?
What are two similarities and two differences between the two media types?
Conclusion
Present your Electronic Media Presentation.
These are 10- to 12-slideMicrosoft
®
PowerPoint
®
presentations with notes.
.
This is a presentation by Dada Robert in a Your Skill Boost masterclass organised by the Excellence Foundation for South Sudan (EFSS) on Saturday, the 25th and Sunday, the 26th of May 2024.
He discussed the concept of quality improvement, emphasizing its applicability to various aspects of life, including personal, project, and program improvements. He defined quality as doing the right thing at the right time in the right way to achieve the best possible results and discussed the concept of the "gap" between what we know and what we do, and how this gap represents the areas we need to improve. He explained the scientific approach to quality improvement, which involves systematic performance analysis, testing and learning, and implementing change ideas. He also highlighted the importance of client focus and a team approach to quality improvement.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Ethnobotany and Ethnopharmacology:
Ethnobotany in herbal drug evaluation,
Impact of Ethnobotany in traditional medicine,
New development in herbals,
Bio-prospecting tools for drug discovery,
Role of Ethnopharmacology in drug evaluation,
Reverse Pharmacology.
We all have good and bad thoughts from time to time and situation to situation. We are bombarded daily with spiraling thoughts(both negative and positive) creating all-consuming feel , making us difficult to manage with associated suffering. Good thoughts are like our Mob Signal (Positive thought) amidst noise(negative thought) in the atmosphere. Negative thoughts like noise outweigh positive thoughts. These thoughts often create unwanted confusion, trouble, stress and frustration in our mind as well as chaos in our physical world. Negative thoughts are also known as “distorted thinking”.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
How to Create Map Views in the Odoo 17 ERPCeline George
The map views are useful for providing a geographical representation of data. They allow users to visualize and analyze the data in a more intuitive manner.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Running head STUDENT MANUAL1STUDENT MANUAL11The.docx
1. Running head: STUDENT MANUAL 1
STUDENT MANUAL 11
The Bachelor of Science in Nursing Student Manual
Queen Bella
University of Phoenix
Table of Contents
The Mission Statement of the College 3
The Mission Statement of the Nursing School 3
The Purpose Statement of the School 3
Program Description 3
The Student Learning Outcomes 4
Progression Examinations and Assessments 5
Clinical Experience Requirements 6
Clinical Site Selection 6
Clinical Setting Orientation 6
Required Materials 7
Clinical Assignments 7
Clinical Agency and Logs Documentation of Activities 7
Agency Documentation 7
Clinical Logs 7
Clinical Evaluation 8
Clinical Absences 8
Professional Dress Policy8
Serious Professional Behavior or Performance Issues 9
Simulation Learning Centers 9
2. Nursing Program Manual for the University of PhoenixThe
Mission Statement of the College
The mission of the college is to provide the post and pre-
licensure nursing, health care support and health care
administration certificates, courses and programs (Lindquist,
2006). The college is committed to providing relevant,
innovative education that will address and anticipate the various
needs of the healthcare industry, the needs of adults and their
employers.The Mission Statement of the Nursing School
The Nursing school aims at nurturing and promoting nursing
leadership to its students through the delivery and development
of different educational opportunities that will mainly embody
the value of leadership, excellence in practice and caring in the
nursing profession.The Purpose Statement of the School
The main purpose of the Phoenix University Nursing School is
to educate its students into the best educational programs at the
undergraduate and graduate levels that will help them in
advancing their nursing profession (Breneman, 2006).Program
Description
The Bachelors of Science in Nursing program at the University
of Phoenix is a fully accredited program by the Commission of
Collegiate Nursing Education. It has qualified to have a special
progression for the Vocational Nurse/Practical Nurse which
enables it to achieve the Bachelors of Science Degree (Olsen,
2002). The program mainly centers on skills, experiences of the
practical nurse that are transitioning to the professional nursing
role and also the basic education. The curriculum of this
program has been founded upon a foundation of physical,
social, and biological sciences that are mainly known for their
contribution to the nursing science. The components of the
liberal arts in this program such as cultural, intellectual, and
social aspects serve as a tool of development. Finally, the main
contents of the program will primarily focus on critical
thinking, role transition, evidence-based practice, and advanced
clinical skills (White, Baker, & Baker, 2003). All the graduates
will undertake their final examination from the National
3. Council Licensure Examination for Registered Nurses. The
maximum total credits for the course is 120 while the length of
the program will be 215 weeks. For one to qualify for the
graduation in this course, he or she must fulfill the following
requirements;
· Must have completed 120 credits; 57 lower division and 63
upper division (41 in the required course of study in addition to
6 non-nursing electives.
· Must have achieved a minimum grade point average of 2.5.
· Must get a C or a better grade in all the required core courses.
· Must have successfully completed the nursing capstone
NSG/480.
· Must have completed the comprehensive predictor benchmark.
· Must have met the residency requirements of 57 credits and
above from the University of Phoenix.
· Must have completed all the coursework within a period of
eight years.The Student Learning Outcomes
· Students must be able have respect for cultural diversity and
integrate ethical values in safe patient centered healthcare
practice and delivery in different health care settings.
· Students should be able to apply knowledge, nursing process
and theories in providing safe patient-centered care in the
different healthcare settings.
· Students should be able to apply disease management and
health promotion principles that will help them in the
integration of evidence-based nursing knowledge to enhance
safe-patient-centered care (Lindquist, 2006).
· Students should be able to integrate their professional nursing
leadership roles as coordinators, designers and managers of safe
patient-centered care in the different health care settings.
· Students should be able to use communication devices, health
care equipment, information systems, and technology to give
out safe patient-centered care in different health care settings.
· Students must be able to critically analyze the effects of
economic, regulatory, sociocultural, legal and health care policy
environments on the health care practice and delivery in
4. different health care settings.
· Finally the students must be able to integrate their
professional role as educators in the health care practice and
delivery of different health care settings.Progression
Examinations and Assessments
Students are required to finish reliable and valid standardized
testing that is nationally normed as it will help them to prepare
them in licensure. This must be done the course sequence of the
student. Students are required to complete a proctored exam at
their campus after the end of their clinical experience
component in the course. The information about the
standardized exam will be provided by the instructor to all the
student (Olsen, 2002). The results of the exam will be factored
into the final course grade of the student. All the tests must be
completed within the University of Phoenix grading policy time
requirements. Directions, location and times of the test will be
provided to the students by the campus nursing
administrators.Clinical Experience Requirements
All students are required to successfully complete both their
clinical and didactic experience requirement as stipulated in the
LVN/LPN to the BSN program. This will also encompass
simulation activities completed in lieu of direct-contact clinical
activities, direct-contact clinical services, theory, and the
supplemental lab activities (Lindquist, 2006). However, it is
important to note that the supplemental lab activities should not
be confused with the simulation activities completed in lieu of
direct-contact clinical activities.Clinical Site Selection
Affiliation agreements will have to be agreed upon first before
the students can complete their clinical experience hours in any
clinical agency during the NSG/420 and NSG/450. This means
that student must first of all contact and identify agencies to
know if they can provide appropriate experiences (White,
Baker, & Baker, 2003).Clinical Setting Orientation
All students will be provided with an agency clinical orientation
to enable them feel comfortable in their new environment. All
the appropriate procedures and policies will be reviewed by the
5. clinical instructor (Olsen, 2002). The clinical instructor will
also provide the students with a facility tour before the start of
the clinical rotations.Required Materials
To qualify for the clinical experience, all the students must be
prepared with the following; a pre-clinical preparation
paperwork that is complete which may include a patient care
plan. Other materials include; a watch with a second hand, a
nursing drug reference, a pen light, a University of Phoenix
photo ID badge, a stethoscope (Breneman, 2006). A student may
be removed from the clinical environment if he or she fails to
meet these requirements.Clinical Assignments
The students will be given some specific assignments each week
during the clinical courses at their posted clinical agency.
Students will be able to review how they can post and make
their assignments during their orientation. The timeframe for
posting the assignments will always vary depending on the
patient turnover and the agency.Clinical Agency and Logs
Documentation of ActivitiesAgency Documentation
All the nursing care that will be provided by the students to
their patients is required to be documented using the designated
format of the agency (Breneman, 2006). These documentations
will include; notes of the nurses, output and intake records,
flow sheets, and graphic records among other special forms that
are required by the agency.Clinical Logs
Students are required to complete their clinical logs to enable
them to demonstrate appropriate hour completion and their
clinical experience activity. The students must upload their
completed logs to the classroom on a weekly basis to enable the
validation of hours by the faculty. This acts as essential
evidence in ensuring that students satisfactorily complete the
approved curriculum by the board of nurses (Breneman, 2006).
Failure to complete the appropriate hours, uploading of logs and
activities will get an “F”.Clinical Evaluation
Students will be provided with some constructive performance
feedback that will be in the form of summative and formative
evaluations.Clinical Absences
6. All students are required to complete all the required hours in
the course as required by their degree program. Students cannot
progress to another before completing the prior one. Failure to
complete the requisite hours will lead to fail in the
course.Professional Dress Policy
All students taking a nursing course are required to put on a
maroon scrub top together with a white embroidered University
logo and scrub pants that are maroon in color. The uniform must
be put on in simulation labs, during practice and skill learning
and in acute care settings. Vendor information will always be
provided by the campus staff (Olsen, 2002). Students may
sometimes be needed to put on a white lab coat depending on
some settings. However, some clinical agencies may alter the
way students dress. Students are required to wear, professional
attire that is modest, conservative or even put on some maroon
scrub pants with good low or flat heeled closed-toe shoes.
Agency identification badges may also be required in addition
to the agency badges.Serious Professional Behavior or
Performance Issues
The school will have the right to remove any student who
violates the set out rules during the course. The students will be
dismissed after investigation establishes the reason for
dismissal.Simulation Learning Centers
The University of Phoenix will provide simulation experiences
and labs for its nursing students to enable them have some good
practical experiences.
References
Lindquist, B. (2006). Blended learning at the University of
Phoenix. The handbook of blended learning: Global
perspectives, local designs, 223, 234.
White, K. W., Baker, P., & Baker, J. D. (2003). The student
guide to successful online learning: A handbook of tips,
strategies, and techniques. Allyn & Bacon.
7. Breneman, D. W. (2006). The university of phoenix. Icon of
for-profit higher education. Earnings from learning: The rise of
for-profit universities, 71-92.
Olsen, F. (2002). Phoenix rises. Chronicle of Higher
Education, 49(10), A29.
