Elements in the same row have the same number of () levelsWhi.docx
•Download as DOCX, PDF•
0 likes•3 views
Elements in the same row have the same number of (*) levels Which elements in B O U L A N would be in the same family? Which would have the same number of energy levels? Highest mass? Lowest mass? Which is more reactive? Uranium or Lithium Will elements B and U lose electrons in a chemical reactor? Will elements B and U form positive or negative ions? Thanks so much (: .
Report
Share
Report
Share
Recommended
Elementary CurriculaBoth articles highlight the fact that middle.docx
Elementary Curricula
Both articles highlight the fact that middle-class students seem to benefit more from summer reading programs than their lower-SES peers. While we would hope that summer reading programs would have the same positive impact on all students, this information did not totally surprise me. Differences in funding, materials, and ability to recruit enough high-quality teachers for summer programs could be more difficult in lower-socioeconomic areas. In addition, the articles did not dive into other factors in the students’ lives that may be contributing to their performance such as attendance, how well-rested they are, trauma they have experiences that impacts their ability to focus during instruction, and the impact of being taught by a teacher who the students may not know or have a relationship with. Additionally, there could be a mismatch between the instructional practices and the specific needs of the students. Even though summer reading programs are only for a short time, I would challenge teachers to put energy into getting to know the students and building trust with them. This is a key foundation that is needed for learning to take place.
In challenging teachers during summer program and the regular school year to ”break out of the mold” to create better outcomes for students classified with low SES, in addition to building relationships with students, I would encourage them to build connections with their families. This may involve thinking outside the box and leaving their comfort zone. It could entail holding a parent-teacher conference off campus, closer to their home or in their community. It could also include providing resources and instructional videos to parents so they can help support their children at home. There are many parents who want to support their children academically, but they do not know how and may be uncomfortable asking the teacher for assistance. In addition, I would urge teachers to capitalize on the strengths and interests of their students to engage them in learning activities and provide them with opportunities to shine. We do not have to, and should not, be satisfied with the idea that low SES students will automatically not be able to perform. These students are capable of learning and growth just as much as any other student. I think data from test scores that demonstrate a gap between the performance of students classified as economically disadvantaged and not economically disadvantaged has led some people to hold the belief that students classified as low SES will not perform well. I think the way that school “report card” grades are published also perpetuates this belief, as it shows the test scores, but does not provide an explanation of or include any solutions for the many larger societal factors that contribute to those scores including high teacher turn over, lack of resources, child trauma, lack of sleep, lack of nutrition, crime & safety, and education level of parents.
It w.
Elementary Statistics (MATH220)Assignment Statistic.docx
Elementary Statistics (MATH220)
Assignment:
Statistical Project & Presentation
Purpose:
The purpose of this project is to supplement lecture material by having the students to do a case study on collecting, analyzing, and interpreting data.
***The best way to understand something is to experience it for yourself.
Guideline for Analyzing Data and Writing a Report
Below is a general outline of the topics that should be included in your report.
1.
Introduction.
State the topic of your study.
2.
Define Population.
Define the population that you intend for your study to represent.
3.
Define Variable.
Define clearly the variable that you obtained during your data collection; this should include information on how the variable is measured and what possible values this variable has.
4.
Data Collection.
Describe your data collection process, including your data source, your sampling strategy, and what steps you took to avoid bias.
5.
Study Design.
Describe the procedures you followed to analyze your data.
6.
Results: Descriptive Statistics.
Give the relevant descriptive statistics for the sample you collected.
7.
Results: Statistical Analysis.
Describe the results of your statistical analysis.
8.
Findings.
Interpret the results of your analysis in the context of your original research question. Was your hypothesis supported by your statistical analyses? Explain.
9.
Discussion.
What conclusions, if any, do you believe you can draw as a result of your study? If the results were not what you expected, what factors might explain your results? What did you learn from the project about the population you studied? What did you learn about the research variable? What did you learn about the specific statistical test you conducted?
.
Elements of Religious Traditions PaperWritea 700- to 1,050-word .docx
Elements of Religious Traditions Paper
Write
a 700- to 1,050-word paper that does the following:
Describes these basic components of religious traditions and their relationship to the sacred
:
What a religious tradition says—its teachings, texts, doctrine, stories, myths, and others
What a religious tradition does—worship, prayer, pilgrimage, ritual, and so forth
How a religious tradition organizes—leadership, relationships among members, and so forth
Identifies key critical issues in the study of religion.
Includes specific examples from the various religious traditions described in the Week One readings that honor the sacred—such as rituals of the Igbo to mark life events, the vision quest as a common ritual in many Native American societies, or the influence of the shaman as a leader. You may also include examples from your own religious tradition or another religious tradition with which you are familiar.
Format
your paper consistent with APA guidelines
.
Elements of MusicPitch- relative highness or lowness that we .docx
Elements of Music
Pitch- relative highness or lowness that we hear in a sound.
Tone- sound that has a definite pitch.
(For example striking a bat against a ball does not produce a D# but striking a D#
on a piano does)
Dynamics- the degree of loudness or softness in music
pp pianissimo /very soft
p piano /soft
mp mezzo-piano /medium-soft
mf mezzo-forte /medium-loud
f forte /loud
ff fortissimo /very loud
When dynamics are altered in a piece of music, they are termed as follows:
decrescendo/ diminuendo gradually softer
crescendo gradually louder
Timbre/Tone Color- the character or quality of a sound.
dark, bright, mellow, cool, metallic, rich, brilliant, thin, etc.
Rhythm- a) the flow (or pattern) of music through time. b) the particular arrangement of
note lengths in a piece of music.
Syncopation- An accent placed on a beat where it is not normally expected.
Beat- the steady pulse in a piece of music.
Downbeat- the first or stressed beat of a measure.
Meter- the pattern in which beats are organized within a piece of music.
Examples:
3/4= three beats per measure
4/4= four beats per measure
6/8= six beats per measure
*In some musics, meter is not present- this is termed non-metric.
(Ex: Chant, some 20th century genres, world musics).
Melody- a series of single notes that add up to a recognizable whole.
*A melodic line has a shape -it ascends and descends in a series of continuous pitches.
Sequence- a repetition of a pattern at a higher or lower pitch.
Phrase- A short unit of music within a melodic line.
Cadence- The rest at the end of a musical phrase. Think of this as a musical period at the
end of a sentence.
Harmony- A) How chords are constructed and how they follow each other. B) The
relationship of tones when sounded in a group.
Chord- a combination of three or more tones sounded at once.
Consonance- a stable tone combination in a chord
Dissonance- and unstable tone combination in a chord; usually, an expected
and stable resolution will follow.
Tonic- a) the main key of a piece of music. b) the first note of a scale
Key- the central tone or scale in a piece of music.
(example: A major, b minor)
Modulation- a shift from one key to another within the same piece of music.
Texture- layering of musical sounds or instruments within a piece of music.
Monophonic- single, unaccompanied melodic line.
Homophonic- a melody with an accompaniment of chords.
Polyphonic- th.
Elevated Blood Lead Levels in Children AssociatedWith the Fl.docx
Elevated Blood Lead Levels in Children Associated
With the Flint Drinking Water Crisis: A Spatial
Analysis of Risk and Public Health Response
Mona Hanna-Attisha, MD, MPH, Jenny LaChance, MS, Richard Casey Sadler, PhD, and Allison Champney Schnepp, MD
Objectives. We analyzed differences in pediatric elevated blood lead level incidence
before and after Flint, Michigan, introduced a more corrosive water source into an aging
water system without adequate corrosion control.
Methods. We reviewed blood lead levels for children younger than 5 years before
(2013) and after (2015) water source change in Greater Flint, Michigan. We assessed the
percentage of elevated blood lead levels in both time periods, and identified geo-
graphical locations through spatial analysis.
Results. Incidence of elevated blood lead levels increased from 2.4% to 4.9% (P < .05)
after water source change, and neighborhoods with the highest water lead levels ex-
perienced a 6.6% increase. No significant change was seen outside the city. Geospatial
analysis identified disadvantaged neighborhoods as having the greatest elevated blood
lead level increases and informed response prioritization during the now-declared public
health emergency.
Conclusions. The percentage of children with elevated blood lead levels increased
after water source change, particularly in socioeconomically disadvantaged neighbor-
hoods. Water is a growing source of childhood lead exposure because of aging infra-
structure. (Am J Public Health. 2016;106:283–290. doi:10.2105/AJPH.2015.303003)
See also Rosner, p. 200.
In April 2014, the postindustrial city ofFlint, Michigan, under state-appointed
emergency management, changed its water
supply from Detroit-supplied Lake Huron
water to the Flint River as a temporary
measure, awaiting a new pipeline to Lake
Huron in 2016. Intended to save money, the
change in source water severed a half-
century relationship with the Detroit Water
and Sewage Department. Shortly after the
switch to Flint River water, residents voiced
concerns regarding water color, taste, and
odor, and various health complaints in-
cluding skin rashes.1 Bacteria, including
Escherichia coli, were detected in the distri-
bution system, resulting in Safe Drinking
Water Act violations.2 Additional disinfec-
tion to control bacteria spurred formation of
disinfection byproducts including total tri-
halomethanes, resulting in Safe Drinking
Water Act violations for trihalomethane
levels.2
Water from the Detroit Water and
Sewage Department had very low corrosivity
for lead as indicated by low chloride, low
chloride-to-sulfate mass ratio, and presence
of an orthophosphate corrosion inhibitor.3,4
By contrast, Flint River water had high
chloride, high chloride-to-sulfate mass ratio,
and no corrosion inhibitor.5 Switching
from Detroit’s Lake Huron to Flint River
water created a perfect storm for lead leach-
ing into drinking water.6 The aging Flint
water distribution system contains a hig.
Elev ent h EDIT IONREAL ESTATE PRINCIPLESCHARLES F. .docx
Elev ent h EDIT ION
REAL ESTATE
PRINCIPLES
CHARLES F. FLOYD and MARCUS T. ALLEN
00RePrinciples_BOOK.indb 1 11/25/2014 8:03:22 AM
This publication is designed to provide accurate and authoritative information
in regard to the subject matter covered. It is sold with the understanding that the
publisher is not engaged in rendering legal, accounting, or other professional
advice. If legal advice or other expert assistance is required, the services of a
competent professional should be sought.
President: Dr. Andrew Temte
Chief Learning Officer: Dr. Tim Smaby
Executive Director, Real Estate Education: Melissa Kleeman-Moy
Development Editor: Julia Marti
REAL ESTATE PRINCIPLES ELEVENTH EDITION
©2014 Kaplan, Inc.
Published by DF Institute, Inc., d/b/a Dearborn Real Estate Education
332 Front St. S., Suite 501
La Crosse, WI 54601
All rights reserved. The text of this publication, or any part thereof, may not be
reproduced in any manner whatsoever without written permission from the
publisher.
Printed in the United States of America
ISBN: 978-1-4754-2173-6 / 1-4754-2173-7
PPN: 1515-0111
00RePrinciples_BOOK.indb 2 11/25/2014 8:03:22 AM
DEDICATION
This book is dedicated to
R. W. Barber
a man of the land
and
C. O. Floyd
a man of business.
—Charles F. Floyd
This book is dedicated to
Rhonda, Melanie, and Issabella.
—Marcus T. Allen
00RePrinciples_BOOK.indb 3 11/25/2014 8:03:23 AM
00RePrinciples_BOOK.indb 4 11/25/2014 8:03:23 AM
v
c o n t e n t s
p r e f a c e x i i i
r e a l e s tat e t o d ay f e at u r e s x v i i
c h a p t e r 1
Why Study Real Estate? xx
Chapter Preview 1
The Role of Real Estate Studies in Business Education 2
Personal and Business-Related Real Estate Decisions 2
Organization of This Book 3
Special Characteristics of Real Estate 4
The Economic Importance of Real Estate 9
The Real Estate Industry: Career Opportunities 10
Chapter Review 13
Key Terms 14
p a r t o n e
Real Estate Legal Analysis 15
c h a p t e r 2
Property Rights and Legal Descriptions 16
Chapter Preview 17
Real versus Personal Property 18
Fixtures 18
Mineral and Air Rights 20
Water Rights 20
Estates in Land 23
Concurrent Estates 29
00RePrinciples_BOOK.indb 5 11/25/2014 8:03:23 AM
vi Contents
Condominium Ownership 31
Cooperative Ownership 32
Time-Shares 32
Legal Descriptions 32
Chapter Review 43
Key Terms 45
Study Exercises 46
Further Reading 47
c h a p t e r 3
Private Restrictions on Ownership 48
Chapter Preview 49
Covenants, Conditions, and Restrictions 50
Liens 54
Easements 58
A Relatively New Type of Easement 64
Profit a Prendre 64
Encroachments 64
Adverse Possession 66
Chapter Review 67
Key Terms 68
Study Exercises 68
c h a p t e r 4
Public Restrictions on Ownership 70
Chapter Preview 71
The Property Tax 72
Power of Eminent Domain 74
Police Power 75
The Comprehensive General Plan 76
Zoning 76
Chapter Review 94
Key Terms 96
Study Exercises 9.
Elements of the Communication ProcessIn Chapter One, we learne.docx
Elements of the Communication Process
In Chapter One, we learned communication is the process of creating or sharing meaning in informal conversation, group interaction, or public speaking. To understand how the process works, we described the essential elements in the process.
For the following interaction, identify the contexts, participants, channels. message, interference (noise), and feedback.
"Maria and Damien are meandering through the park, talking and drinking bottled water. Damien finishes his bottle, replaces the lid, and tosses the bottle into the bushes at the side of the path. Maria, who has been listening to Damien talk, comes to a stop, puts her hand on her hips, stares at Damien, and says angrily, " I can't believe what you just did! Damien blushes, averts his gaze, and mumbles, "Sorry, I'll get it- I just wasn't thinking." As the tension drains from Maria's face. she gives her head a playful toss, smiles, and says, Well, just see that it doesn't happen again.
1. Contexts
a. Physical
b. Social
c. Historical
d. Psychological
2. Participants
3. Channels
4. Message
5. Interference (Noise)
6. Feedback
.
Elements of Music #1 Handout1. Rhythm the flow of music in te.docx
Elements of Music #1 Handout
1. Rhythm
the flow of music in terms of time
2. Beat
the pulse that recurs regularly in music
3. Meter
the regular pattern of stressed and unstressed beats
4. Tempo
the speed of the beats in a piece of music
5. Polyrhythm
two or more rhythm patterns occurring simultaneously
6. Pitch
the perceived highness or lowness of a musical sound
7. Melody
a series of consecutive pitches that form a cohesive musical entity
8. Counterpoint
two or more independent lines with melodic character occurring at the same time
9. Harmony
the simultaneous sounds of several pitches, usually in accompanying a melody
10. Dynamics
the amount of loudness in music
11. Timbre
tone quality or tone color in music
12. Form
the pattern or plan of a musical work
Framework for Improving
Critical Infrastructure Cybersecurity
Version 1.1
National Institute of Standards and Technology
April 16, 2018
April 16, 2018 Cybersecurity Framework Version 1.1
This publication is available free of charge from: https://doi.org/10.6028/NIST.CSWP.04162018 ii
No t e t o Rea d er s o n t h e U p d a t e
Version 1.1 of this Cybersecurity Framework refines, clarifies, and enhances Version 1.0, which
was issued in February 2014. It incorporates comments received on the two drafts of Version 1.1.
Version 1.1 is intended to be implemented by first-time and current Framework users. Current
users should be able to implement Version 1.1 with minimal or no disruption; compatibility with
Version 1.0 has been an explicit objective.
The following table summarizes the changes made between Version 1.0 and Version 1.1.
Table NTR-1 - Summary of changes between Framework Version 1.0 and Version 1.1.
Update Description of Update
Clarified that terms like
“compliance” can be
confusing and mean
something very different
to various Framework
stakeholders
Added clarity that the Framework has utility as a structure and
language for organizing and expressing compliance with an
organization’s own cybersecurity requirements. However, the
variety of ways in which the Framework can be used by an
organization means that phrases like “compliance with the
Framework” can be confusing.
A new section on self-
assessment
Added Section 4.0 Self-Assessing Cybersecurity Risk with the
Framework to explain how the Framework can be used by
organizations to understand and assess their cybersecurity risk,
including the use of measurements.
Greatly expanded
explanation of using
Framework for Cyber
Supply Chain Risk
Management purposes
An expanded Section 3.3 Communicating Cybersecurity
Requirements with Stakeholders helps users better understand
Cyber Supply Chain Risk Management (SCRM), while a new
Section 3.4 Buying Decisions highlights use of the Framework
in understanding risk associated with commercial off-the-shelf
products and services. Additional Cyber SCRM criteria we.
Recommended
Elementary CurriculaBoth articles highlight the fact that middle.docx
Elementary Curricula
Both articles highlight the fact that middle-class students seem to benefit more from summer reading programs than their lower-SES peers. While we would hope that summer reading programs would have the same positive impact on all students, this information did not totally surprise me. Differences in funding, materials, and ability to recruit enough high-quality teachers for summer programs could be more difficult in lower-socioeconomic areas. In addition, the articles did not dive into other factors in the students’ lives that may be contributing to their performance such as attendance, how well-rested they are, trauma they have experiences that impacts their ability to focus during instruction, and the impact of being taught by a teacher who the students may not know or have a relationship with. Additionally, there could be a mismatch between the instructional practices and the specific needs of the students. Even though summer reading programs are only for a short time, I would challenge teachers to put energy into getting to know the students and building trust with them. This is a key foundation that is needed for learning to take place.
In challenging teachers during summer program and the regular school year to ”break out of the mold” to create better outcomes for students classified with low SES, in addition to building relationships with students, I would encourage them to build connections with their families. This may involve thinking outside the box and leaving their comfort zone. It could entail holding a parent-teacher conference off campus, closer to their home or in their community. It could also include providing resources and instructional videos to parents so they can help support their children at home. There are many parents who want to support their children academically, but they do not know how and may be uncomfortable asking the teacher for assistance. In addition, I would urge teachers to capitalize on the strengths and interests of their students to engage them in learning activities and provide them with opportunities to shine. We do not have to, and should not, be satisfied with the idea that low SES students will automatically not be able to perform. These students are capable of learning and growth just as much as any other student. I think data from test scores that demonstrate a gap between the performance of students classified as economically disadvantaged and not economically disadvantaged has led some people to hold the belief that students classified as low SES will not perform well. I think the way that school “report card” grades are published also perpetuates this belief, as it shows the test scores, but does not provide an explanation of or include any solutions for the many larger societal factors that contribute to those scores including high teacher turn over, lack of resources, child trauma, lack of sleep, lack of nutrition, crime & safety, and education level of parents.
It w.
Elementary Statistics (MATH220)Assignment Statistic.docx
Elementary Statistics (MATH220)
Assignment:
Statistical Project & Presentation
Purpose:
The purpose of this project is to supplement lecture material by having the students to do a case study on collecting, analyzing, and interpreting data.
***The best way to understand something is to experience it for yourself.
Guideline for Analyzing Data and Writing a Report
Below is a general outline of the topics that should be included in your report.
1.
Introduction.
State the topic of your study.
2.
Define Population.
Define the population that you intend for your study to represent.
3.
Define Variable.
Define clearly the variable that you obtained during your data collection; this should include information on how the variable is measured and what possible values this variable has.
4.
Data Collection.
Describe your data collection process, including your data source, your sampling strategy, and what steps you took to avoid bias.
5.
Study Design.
Describe the procedures you followed to analyze your data.
6.
Results: Descriptive Statistics.
Give the relevant descriptive statistics for the sample you collected.
7.
Results: Statistical Analysis.
Describe the results of your statistical analysis.
8.
Findings.
Interpret the results of your analysis in the context of your original research question. Was your hypothesis supported by your statistical analyses? Explain.
9.
Discussion.
What conclusions, if any, do you believe you can draw as a result of your study? If the results were not what you expected, what factors might explain your results? What did you learn from the project about the population you studied? What did you learn about the research variable? What did you learn about the specific statistical test you conducted?
.
Elements of Religious Traditions PaperWritea 700- to 1,050-word .docx
Elements of Religious Traditions Paper
Write
a 700- to 1,050-word paper that does the following:
Describes these basic components of religious traditions and their relationship to the sacred
:
What a religious tradition says—its teachings, texts, doctrine, stories, myths, and others
What a religious tradition does—worship, prayer, pilgrimage, ritual, and so forth
How a religious tradition organizes—leadership, relationships among members, and so forth
Identifies key critical issues in the study of religion.
Includes specific examples from the various religious traditions described in the Week One readings that honor the sacred—such as rituals of the Igbo to mark life events, the vision quest as a common ritual in many Native American societies, or the influence of the shaman as a leader. You may also include examples from your own religious tradition or another religious tradition with which you are familiar.
Format
your paper consistent with APA guidelines
.
Elements of MusicPitch- relative highness or lowness that we .docx
Elements of Music
Pitch- relative highness or lowness that we hear in a sound.
Tone- sound that has a definite pitch.
(For example striking a bat against a ball does not produce a D# but striking a D#
on a piano does)
Dynamics- the degree of loudness or softness in music
pp pianissimo /very soft
p piano /soft
mp mezzo-piano /medium-soft
mf mezzo-forte /medium-loud
f forte /loud
ff fortissimo /very loud
When dynamics are altered in a piece of music, they are termed as follows:
decrescendo/ diminuendo gradually softer
crescendo gradually louder
Timbre/Tone Color- the character or quality of a sound.
dark, bright, mellow, cool, metallic, rich, brilliant, thin, etc.
Rhythm- a) the flow (or pattern) of music through time. b) the particular arrangement of
note lengths in a piece of music.
Syncopation- An accent placed on a beat where it is not normally expected.
Beat- the steady pulse in a piece of music.
Downbeat- the first or stressed beat of a measure.
Meter- the pattern in which beats are organized within a piece of music.
Examples:
3/4= three beats per measure
4/4= four beats per measure
6/8= six beats per measure
*In some musics, meter is not present- this is termed non-metric.
(Ex: Chant, some 20th century genres, world musics).
Melody- a series of single notes that add up to a recognizable whole.
*A melodic line has a shape -it ascends and descends in a series of continuous pitches.
Sequence- a repetition of a pattern at a higher or lower pitch.
Phrase- A short unit of music within a melodic line.
Cadence- The rest at the end of a musical phrase. Think of this as a musical period at the
end of a sentence.
Harmony- A) How chords are constructed and how they follow each other. B) The
relationship of tones when sounded in a group.
Chord- a combination of three or more tones sounded at once.
Consonance- a stable tone combination in a chord
Dissonance- and unstable tone combination in a chord; usually, an expected
and stable resolution will follow.
Tonic- a) the main key of a piece of music. b) the first note of a scale
Key- the central tone or scale in a piece of music.
(example: A major, b minor)
Modulation- a shift from one key to another within the same piece of music.
Texture- layering of musical sounds or instruments within a piece of music.
Monophonic- single, unaccompanied melodic line.
Homophonic- a melody with an accompaniment of chords.
Polyphonic- th.
Elevated Blood Lead Levels in Children AssociatedWith the Fl.docx
Elevated Blood Lead Levels in Children Associated
With the Flint Drinking Water Crisis: A Spatial
Analysis of Risk and Public Health Response
Mona Hanna-Attisha, MD, MPH, Jenny LaChance, MS, Richard Casey Sadler, PhD, and Allison Champney Schnepp, MD
Objectives. We analyzed differences in pediatric elevated blood lead level incidence
before and after Flint, Michigan, introduced a more corrosive water source into an aging
water system without adequate corrosion control.
Methods. We reviewed blood lead levels for children younger than 5 years before
(2013) and after (2015) water source change in Greater Flint, Michigan. We assessed the
percentage of elevated blood lead levels in both time periods, and identified geo-
graphical locations through spatial analysis.
Results. Incidence of elevated blood lead levels increased from 2.4% to 4.9% (P < .05)
after water source change, and neighborhoods with the highest water lead levels ex-
perienced a 6.6% increase. No significant change was seen outside the city. Geospatial
analysis identified disadvantaged neighborhoods as having the greatest elevated blood
lead level increases and informed response prioritization during the now-declared public
health emergency.
Conclusions. The percentage of children with elevated blood lead levels increased
after water source change, particularly in socioeconomically disadvantaged neighbor-
hoods. Water is a growing source of childhood lead exposure because of aging infra-
structure. (Am J Public Health. 2016;106:283–290. doi:10.2105/AJPH.2015.303003)
See also Rosner, p. 200.
In April 2014, the postindustrial city ofFlint, Michigan, under state-appointed
emergency management, changed its water
supply from Detroit-supplied Lake Huron
water to the Flint River as a temporary
measure, awaiting a new pipeline to Lake
Huron in 2016. Intended to save money, the
change in source water severed a half-
century relationship with the Detroit Water
and Sewage Department. Shortly after the
switch to Flint River water, residents voiced
concerns regarding water color, taste, and
odor, and various health complaints in-
cluding skin rashes.1 Bacteria, including
Escherichia coli, were detected in the distri-
bution system, resulting in Safe Drinking
Water Act violations.2 Additional disinfec-
tion to control bacteria spurred formation of
disinfection byproducts including total tri-
halomethanes, resulting in Safe Drinking
Water Act violations for trihalomethane
levels.2
Water from the Detroit Water and
Sewage Department had very low corrosivity
for lead as indicated by low chloride, low
chloride-to-sulfate mass ratio, and presence
of an orthophosphate corrosion inhibitor.3,4
By contrast, Flint River water had high
chloride, high chloride-to-sulfate mass ratio,
and no corrosion inhibitor.5 Switching
from Detroit’s Lake Huron to Flint River
water created a perfect storm for lead leach-
ing into drinking water.6 The aging Flint
water distribution system contains a hig.
Elev ent h EDIT IONREAL ESTATE PRINCIPLESCHARLES F. .docx
Elev ent h EDIT ION
REAL ESTATE
PRINCIPLES
CHARLES F. FLOYD and MARCUS T. ALLEN
00RePrinciples_BOOK.indb 1 11/25/2014 8:03:22 AM
This publication is designed to provide accurate and authoritative information
in regard to the subject matter covered. It is sold with the understanding that the
publisher is not engaged in rendering legal, accounting, or other professional
advice. If legal advice or other expert assistance is required, the services of a
competent professional should be sought.
President: Dr. Andrew Temte
Chief Learning Officer: Dr. Tim Smaby
Executive Director, Real Estate Education: Melissa Kleeman-Moy
Development Editor: Julia Marti
REAL ESTATE PRINCIPLES ELEVENTH EDITION
©2014 Kaplan, Inc.
Published by DF Institute, Inc., d/b/a Dearborn Real Estate Education
332 Front St. S., Suite 501
La Crosse, WI 54601
All rights reserved. The text of this publication, or any part thereof, may not be
reproduced in any manner whatsoever without written permission from the
publisher.
Printed in the United States of America
ISBN: 978-1-4754-2173-6 / 1-4754-2173-7
PPN: 1515-0111
00RePrinciples_BOOK.indb 2 11/25/2014 8:03:22 AM
DEDICATION
This book is dedicated to
R. W. Barber
a man of the land
and
C. O. Floyd
a man of business.
—Charles F. Floyd
This book is dedicated to
Rhonda, Melanie, and Issabella.
—Marcus T. Allen
00RePrinciples_BOOK.indb 3 11/25/2014 8:03:23 AM
00RePrinciples_BOOK.indb 4 11/25/2014 8:03:23 AM
v
c o n t e n t s
p r e f a c e x i i i
r e a l e s tat e t o d ay f e at u r e s x v i i
c h a p t e r 1
Why Study Real Estate? xx
Chapter Preview 1
The Role of Real Estate Studies in Business Education 2
Personal and Business-Related Real Estate Decisions 2
Organization of This Book 3
Special Characteristics of Real Estate 4
The Economic Importance of Real Estate 9
The Real Estate Industry: Career Opportunities 10
Chapter Review 13
Key Terms 14
p a r t o n e
Real Estate Legal Analysis 15
c h a p t e r 2
Property Rights and Legal Descriptions 16
Chapter Preview 17
Real versus Personal Property 18
Fixtures 18
Mineral and Air Rights 20
Water Rights 20
Estates in Land 23
Concurrent Estates 29
00RePrinciples_BOOK.indb 5 11/25/2014 8:03:23 AM
vi Contents
Condominium Ownership 31
Cooperative Ownership 32
Time-Shares 32
Legal Descriptions 32
Chapter Review 43
Key Terms 45
Study Exercises 46
Further Reading 47
c h a p t e r 3
Private Restrictions on Ownership 48
Chapter Preview 49
Covenants, Conditions, and Restrictions 50
Liens 54
Easements 58
A Relatively New Type of Easement 64
Profit a Prendre 64
Encroachments 64
Adverse Possession 66
Chapter Review 67
Key Terms 68
Study Exercises 68
c h a p t e r 4
Public Restrictions on Ownership 70
Chapter Preview 71
The Property Tax 72
Power of Eminent Domain 74
Police Power 75
The Comprehensive General Plan 76
Zoning 76
Chapter Review 94
Key Terms 96
Study Exercises 9.
Elements of the Communication ProcessIn Chapter One, we learne.docx
Elements of the Communication Process
In Chapter One, we learned communication is the process of creating or sharing meaning in informal conversation, group interaction, or public speaking. To understand how the process works, we described the essential elements in the process.
For the following interaction, identify the contexts, participants, channels. message, interference (noise), and feedback.
"Maria and Damien are meandering through the park, talking and drinking bottled water. Damien finishes his bottle, replaces the lid, and tosses the bottle into the bushes at the side of the path. Maria, who has been listening to Damien talk, comes to a stop, puts her hand on her hips, stares at Damien, and says angrily, " I can't believe what you just did! Damien blushes, averts his gaze, and mumbles, "Sorry, I'll get it- I just wasn't thinking." As the tension drains from Maria's face. she gives her head a playful toss, smiles, and says, Well, just see that it doesn't happen again.
1. Contexts
a. Physical
b. Social
c. Historical
d. Psychological
2. Participants
3. Channels
4. Message
5. Interference (Noise)
6. Feedback
.
Elements of Music #1 Handout1. Rhythm the flow of music in te.docx
Elements of Music #1 Handout
1. Rhythm
the flow of music in terms of time
2. Beat
the pulse that recurs regularly in music
3. Meter
the regular pattern of stressed and unstressed beats
4. Tempo
the speed of the beats in a piece of music
5. Polyrhythm
two or more rhythm patterns occurring simultaneously
6. Pitch
the perceived highness or lowness of a musical sound
7. Melody
a series of consecutive pitches that form a cohesive musical entity
8. Counterpoint
two or more independent lines with melodic character occurring at the same time
9. Harmony
the simultaneous sounds of several pitches, usually in accompanying a melody
10. Dynamics
the amount of loudness in music
11. Timbre
tone quality or tone color in music
12. Form
the pattern or plan of a musical work
Framework for Improving
Critical Infrastructure Cybersecurity
Version 1.1
National Institute of Standards and Technology
April 16, 2018
April 16, 2018 Cybersecurity Framework Version 1.1
This publication is available free of charge from: https://doi.org/10.6028/NIST.CSWP.04162018 ii
No t e t o Rea d er s o n t h e U p d a t e
Version 1.1 of this Cybersecurity Framework refines, clarifies, and enhances Version 1.0, which
was issued in February 2014. It incorporates comments received on the two drafts of Version 1.1.
Version 1.1 is intended to be implemented by first-time and current Framework users. Current
users should be able to implement Version 1.1 with minimal or no disruption; compatibility with
Version 1.0 has been an explicit objective.
The following table summarizes the changes made between Version 1.0 and Version 1.1.
Table NTR-1 - Summary of changes between Framework Version 1.0 and Version 1.1.
Update Description of Update
Clarified that terms like
“compliance” can be
confusing and mean
something very different
to various Framework
stakeholders
Added clarity that the Framework has utility as a structure and
language for organizing and expressing compliance with an
organization’s own cybersecurity requirements. However, the
variety of ways in which the Framework can be used by an
organization means that phrases like “compliance with the
Framework” can be confusing.
A new section on self-
assessment
Added Section 4.0 Self-Assessing Cybersecurity Risk with the
Framework to explain how the Framework can be used by
organizations to understand and assess their cybersecurity risk,
including the use of measurements.
Greatly expanded
explanation of using
Framework for Cyber
Supply Chain Risk
Management purposes
An expanded Section 3.3 Communicating Cybersecurity
Requirements with Stakeholders helps users better understand
Cyber Supply Chain Risk Management (SCRM), while a new
Section 3.4 Buying Decisions highlights use of the Framework
in understanding risk associated with commercial off-the-shelf
products and services. Additional Cyber SCRM criteria we.
Elements of Music Report InstrumentsFor the assignment on the el.docx
Elements of Music Report Instruments
For the assignment on the elements of music, students will write a report with a minimum of 300 words.
Students must select one element of music that they consider to be the most important element:
Melody
Rhythm
Harmony
Form
When writing the report, be sure you address the following questions:
Why did you select this element from among all the rest?
Do you think that all kinds of music could exist without your selected element? Elaborate on your view.
Describe a piece of music that highlights the use of your selected element.
I encourage students do research on their element of music in order to get ideas for their reports. All reports must be original works!
Do not quote any source or anybody’s thoughts. Quotes are not permitted in this Instruments Report. I am interested in your own personal thoughts, opinions, and the material you have learned from your research.
.
Elements of GenreAfter watching three of the five .docx
Elements of Genre
After watching three of the five movie clips listed in the
Multimedia
section, above, describe how they fit into a specific genre (or subgenre) as explained in the text. What elements of the film are characteristic of that genre? How does it fulfill the expectations of that genre? How does it play against these expectations?
Your initial post should be at least 150 words in length. Support your claims with examples from required material(s) and/or other scholarly resources, and properly cite any references.
.
Elements of DesignDuring the process of envisioning and designing .docx
Elements of Design
During the process of envisioning and designing a film, the director, production designer, and art director (in collaboration with the cinematographer) are concerned with several major spatial and temporal elements. These design elements punctuate and underscore the movement of figures within the frame, including the following: setting, lighting, costuming, makeup, and hairstyles. Choose a scene from movieclips.com. In a three to five page paper, (excluding the cover and reference pages) analyze the mise-en-scène.
Respond to the following prompts with at least one paragraph per bulleted topic:
Identify the names of the artists involved in the film’s production: the director, the production designer, and the art director. Describe in separate paragraphs each artist’s role in the overall design process. Conduct additional research if necessary, citing your book, film, and other external sources correctly in APA format.
Explain how the artists utilize lighting in the scene. How does the lighting affect our emotional understanding of certain characters? What sort of mood does the lighting evoke? How does lighting impact the overall story the filmmaker is attempting to tell?
Describe the setting, including the time period, location, and culture in which the film takes place.
Explain what costuming can tell us about a character. In what ways can costuming be used to reflect elements of the film's plot?
Explain how hairstyle and makeup can help tell the story. What might hairstyle and makeup reveal about the characters?
Discuss your opinion regarding the mise-en-scène. Do the elements appear to work together in a harmonious way? Does the scene seem discordant? Do you think the design elements are congruent with the filmmaker’s vision for the scene?
.
Elements of Critical Thinking [WLOs 2, 3, 4] [CLOs 2, 3, 4]P.docx
Elements of Critical Thinking [WLOs: 2, 3, 4] [CLOs: 2, 3, 4]
Prepare:
Prior to beginning work on this discussion forum, in preparation for discussing the importance of critical thinking skills,
Read the articles
Common Misconceptions of Critical Thinking
Combating Fake News in the Digital Age
6 Critical Thinking Skills You Need to Master Now (Links to an external site.)
Teaching and Learning in a Post-Truth world: It’s Time for Schools to Upgrade and Reinvest in Media Literacy Lessons
Critical Thinking and the Challenges of Internet (Links to an external site.)
Watch the videos
Fake News: Part 1 (Links to an external site.)
Critical Thinking
(Links to an external site.)
Review the resources
Critical Thinking Skills (Links to an external site.)
Valuable Intellectual Traits (Links to an external site.)
Critical Thinking Web (Links to an external site.)
Reflect:
Reflect on the characteristics of a critical thinker. Critical thinking gets you involved in a dialogue with the ideas you read from others in this class. To be a critical thinker, you need to be able to summarize, analyze, hypothesize, and evaluate new information that you encounter.
Write:
For this discussion, you will address the following prompts. Keep in mind that the article or video you’ve chosen should not be about critical thinking, but should be about someone making a statement, claim, or argument related to your Final Paper topic. One source should demonstrate good critical thinking skills and the other source should demonstrate the lack or absence of critical thinking skills. Personal examples should not be used.
Explain at least five elements of critical thinking that you found in the reading material.
Search the Internet, media, or the Ashford University Library, and find an example in which good critical thinking skills are being demonstrated by the author or speaker. Summarize the content and explain why you think it demonstrates good critical thinking skills.
Search the Internet, media, or the Ashford University Library, and find an example in which the author or speaker lacks good critical thinking skills. Summarize the content and explain why you think it demonstrates the absence of good, critical thinking skills.
Your initial post should be at least 250 words in length, which should include a thorough response to each prompt. You are required to provide in-text citations of applicable required reading materials and/or any other outside sources you use to support your claims. Provide full reference entries of all sources cited at the end of your response. Please use correct APA format when writing in-text citations (see
In-Text Citation Helper (Links to an external site.)
) and references (see
Formatting Your References List (Links to an external site.)
).
Reflecting on General Education and Career [WLOs: 2, 3, 4] [CLOs: 2, 3, 4]
Prepare:
Prior to beginning work on this discussion forum, read the articles
Teaching Writing S.
Elements of DesignDuring the process of envisioning and design.docx
Elements of Design
During the process of envisioning and designing a film, the director, production designer, and art director (in collaboration with the cinematographer) are concerned with several major spatial and temporal elements. These design elements punctuate and underscore the movement of figures within the frame, including the following: setting, lighting, costuming, makeup, and hairstyles. Choose a scene from movieclips.com. In a three to five page paper, (excluding the cover and reference pages) analyze the mise-en-scène.
Respond to the following prompts with at least one paragraph per bulleted topic:
Identify the names of the artists involved in the film’s production: the director, the production designer, and the art director. Describe in separate paragraphs each artist’s role in the overall design process. Conduct additional research if necessary, citing your book, film, and other external sources correctly in APA format.
Explain how the artists utilize lighting in the scene. How does the lighting affect our emotional understanding of certain characters? What sort of mood does the lighting evoke? How does lighting impact the overall story the filmmaker is attempting to tell?
Describe the setting, including the time period, location, and culture in which the film takes place.
Explain what costuming can tell us about a character. In what ways can costuming be used to reflect elements of the film's plot?
Explain how hairstyle and makeup can help tell the story. What might hairstyle and makeup reveal about the characters?
Discuss your opinion regarding the mise-en-scène. Do the elements appear to work together in a harmonious way? Does the scene seem discordant? Do you think the design elements are congruent with the filmmaker’s vision for the scene?
.
Elements of a contact due 16 OctRead the Case Campbell Soup Co. v..docx
Elements of a contact due 16 Oct
Read the Case Campbell Soup Co. v. Wentz in the text. Answer the following questions:
1. What were the terms of the contract between Campbell and the Wentzes?
2. Did the Wentzes perform under the contract?
3. Did the court find specific performance to be an adequate legal remedy in this case?
4. Why did the court refuse to help Campbell in enforcing its legal contract?
5. How could Campbell change its contract in the future so as to avoid the unconsionability problem?
Facts:
Per
a
written
contract
between
Campbell
Soup
Company
(a
New
Jersey
company)
and
the
Wentzes
(carrot
farmers
in
Pennsylvania),
the
Wentzes
would
deliver
to
Campbell
all
the
Chantenay
red
cored
carrots
to
be
grown
on
the
Wentz
farm
during
the
1947
season.
The
contract
price
for
the
carrots
was
$30
per
ton.
The
contract
between
Campbell
Soup
and
all
sellers
of
carrots
was
drafted
by
Campbell
and
it
had
a
provision
that
prohibited
farmers/sellers
from
selling
their
carrots
to
anyone
else,
except
those
carrots
that
were
rejected
by
Campbell.
The
contract
also
had
a
liquidated
damages
provision
of
$50
per
ton
if
the
seller
breached,
but
it
had
no
similar
provision
in
the
event
Campbell
breached.
The
contract
not
only
allowed
Campbell
to
reject
nonconforming
carrots,
but
gave
Campbell
the
right
to
determine
who
could
buy
the
carrots
it
had
rejected.
The
Wentzes
harvested
100
tons
of
carrots,
but
because
the
market
price
at
the
time
of
harvesting
was
$90
per
ton
for
these
rare
carrots,
the
Wentzes
refused
to
deliver
them
to
Campbell
and
sold
62
tons
of
their
carrots
to
a
farmer
who
sold
some
of
those
carrots
to
Campbell.
Campbell
sued
the
Wentzes,
asking
for
the
court's
order
to
stop
further
sale
of
the
contracted
carrots
to
others
and
to
compel
specific
performance
of
the
contract.
The
trial
court
ruled
for
the
Wentzes
and
Campbell
appealed.
Issues:
Is
specific
performance
an
appropriate
legal
remedy
in
this
case
or
is
the
contract
unconscionable?
Discussion:
In
January
1948,
it
was
virtually
impossible
to
obtain
Chantenay
carrots
in
the
open
market.
Campbell
used
Chantenay
carrots
(which
are
easier
to
process
for
soup
making
than
other
carrots)
in
large
quantities
and
furnishes
the
seeds
to
farmers
with
whom
it
contracts.
Campbell
contracted
for
carrots
long
ahead,
and
farmers
entered
into
the
contract
willingly.
If
the
facts
of
this
case
were
this
simple,
specific
performance
should
have
been
granted.
However,
the
problem
is
with
the
contract
itself,
which
was
one-sided.
According
to
the
appellate
court,
the
most
direct
example
of
unconscionability
was
the
provision
that,
under
certain
.
Elements for analyzing mise en sceneIdentify the components of.docx
Elements for analyzing mise en scene
Identify the components of the shot, but explaining the meaning or significance behind those components and connecting the shot to the themes of the film
1. Dominant: Where is the eye attracted first? Why?
2. Lighting key: High key? Low key? High contrast? Some combination of these?
3. Shot and camera proxemics: What type of shot? How far away is the camera from the action?
4. Angle: Is the viewer (through the eye of the camera) looking up or down on the subject? Or is the camera neutral (eye level)?
5. Color values: What is the dominant color? Are there contrasting foils? Is there color symbolism?
6. Lens/filter/stock: How do these distort or comment on the
photographed materials?
7. Subsidiary contrasts: What are the main eye-stops after taking in the dominant?
8. Density: How much visual information is packed into the image? Is the texture stark, moderate, or highly detailed?
9. Composition: How is the two-dimensional space segmented and organized? What is the underlying design?
10. Form: Open or closed? Does the image suggest a window that arbitrarily isolates a fragment of the scene? Or a proscenium arch, in which the visual elements are carefully arranged and held in balance?
11. Framing: Tight or loose? Do characters have little to no room to move, or can they move freely without impediments?
12. Depth: On how many planes is the image composed? Does the background or foreground comment in any way on the midground?
13. Character placement: What part of the framed space do the characters occupy? Center? Top? Bottom? Edges? Why?
14. Staging positions: Which way do the characters look vis-à-vis the camera?
15. Character proxemics: How much space is between the
characters?
What are the 4 distinct formal elements that make up a film's mise en scene?
• staging of the action
• physical setting and decor
• the manner in which these materials are framed
• the manner in which they are photographed
.
ELEG 421 Control Systems Transient and Steady State .docx
ELEG 421
Control Systems
Transient and Steady State
Response Analyses
Dr. Ashraf A. Zaher
American University of Kuwait
College of Arts and Science
Department of Electrical and Computer Engineering
Layout
2
Objectives
This chapter introduces the analysis of the time response of different
control systems under different scenarios. Only first and second order
systems will be considered in details using analytical and numerical
methods. Extension to higher order systems will be developed. Both
transient and steady state responses will be evaluated. Stability analysis
will be analyzed for different kinds of feedback, while investigating the
effect of both proportional and derivative control actions on the
performance of the closed-loop system. Finally systems types and
steady state errors will be calculated for unity feedback.
Outcomes
By the end of this chapter, students will be able to:
evaluate both transient/steady state responses for control systems,
analyze the stability of closed-loop LTI systems,
investigate the effect of P and I control actions on performance, and
understand dominant dynamics of higher order systems.
Dr. Ashraf Zaher
Introduction
3
Test signals
Transient response
Steady state response
Analytical techniques, and
Numerical (simulation) techniques.
Stability (definition and analysis methods),
Relative stability, and
Effect of P/I control actions on stability and performance.
Summary of the used systems:
First order systems,
Second order systems, and
Higher order systems.
Dr. Ashraf Zaher
Test Signals
4 Dr. Ashraf Zaher
Impulse function:
Used to simulate shock inputs,
Laplace transform: 1.
Step function:
Used to simulate sudden disturbances,
Laplace transform: 1/s.
Ramp function:
Used to simulate gradually changing inputs,
Laplace transform: 1/s2.
Sinusoidal function(s):
Used to test response to a certain frequency,
Laplace transform: s/(s2+ω2) for cos(ωt) and ω/(s2+ω2) for sin(ωt).
White noise function:
Used to simulate random noise,
It is a stochastic signal that is easier to deal with in the time domain.
Total response:
C(s) = R(s)*TF(s) = Ctr(s) + Css(s) → c(t) = ctr(t) + css(t)
Fundamentals
5 Dr. Ashraf Zaher
Definitions:
Zeros (Z) of the TF
Poles (P) of the TF
Transient Response (Natural)
Steady State Response (Forced)
Total Response
Limits:
Initial values
Final values
Systems (?Zs):
First order (one P)
Second order (two Ps)
Higher order!
More:
Stability and relative stability
Steady state errors (unity feedback)
First Order Systems
6 Dr. Ashraf Zaher
TF:
T: time constant
Unit Step Response:
1
1
)(
)(
+
=
TssR
sC
)/1(
11
1
1
1
11
)(
TssTs
T
sTss
sC
+
−=
+
−=
+
=
Ttetc /1)( −−=
632.01)( 1 =−== −eTtc
T
e
Tdt
tdc Tt
t
11)( /
0
== −
=
01)0( 0 =−== etc
11)( =−=∞= −∞etc
First Order Systems.
Element 010 ASSIGNMENT 3000 WORDS (100)Task Individual assign.docx
Element 010 ASSIGNMENT: 3000 WORDS (100%)
Task: Individual assignment (3000 words)
Weighting: 100%
Assessment Case Study:
Greenland Garden Centre
[1]
Jon Smith spread his arms widely as he surveyed his garden centre.
‘Of course the whole market for leisure products and services, especially garden-related products, has been expanding over the last few years. Even so, we have been particularly successful. Partly this is because we are conveniently located, but it is also because we have developed a reputation for excellent service. Customers like coming to us for advice. We have also been successful in attracting some of the ‘personality gardeners’ from television to make special appearances. My main ambition now is to fully develop all of our twelve hectares to make the centre a place people will want to visit in its own right. I envisage the centre developing into almost a mini gardening theme park with special gardens, beautiful grounds and special events.’
Greenland is a large village situated in the Cotswolds, a popular tourist area of the UK. It has an interesting range of shops and restaurants, mainly catering for the tourist trade. About half a mile outside the village is the Greenland Garden Centre. The garden centre is served by a good network of main roads but is inaccessible by public transport.
Growth over the last five years has been dramatic and the garden centre now sells many other goods as well as gardening requisites. It also has a restaurant. It is open seven days a week, only closing on Christmas Day. Its opening hours are Monday– Saturday 9 a.m. to 6 p.m. and Sunday 10 a.m. to 5 p.m. all year round.
Outside the centre
The centre has a large car park which can accommodate about 350 cars. Outside the entrance a map indicates the various areas in the garden centre. Most customers walk round the grounds before making their purchases. The length of time people spend in the centre varies but, according to a recent study, averages 53 minutes during the week and 73 minutes at weekends.
The same study shows the extent to which the number of customers arriving at the garden centre varies depending on the time of year, day of the week, and time of day. There are two peaks in customer numbers, one during the late spring/early summer period and another in the build up to Christmas, as Greenland puts on particularly good Christmas displays.
Indoor sales area
The range of goods has increased dramatically over the past few years and now includes items such as:
pets and aquatics
seeds
fertilisers
indoor pots and plants
gardening equipment
garden lighting
conservatory-style furniture
outdoor clothing
picture gallery
books and toys
delicatessen
wine
kitchen equipment
soft furnishing
outdoor eating equipment
gifts, stationery, cards, aromatherapy products
freshly cut flowers
dried flowers.
Outside sales area
In the open air and in large glasshouses there is a complete range of plants, shrubs and trees. Gre.
ELEG 320L – Signals & Systems Laboratory Dr. Jibran Khan Yous.docx
ELEG 320L – Signals & Systems Laboratory /Dr. Jibran Khan Yousafzai Lab 4
1
LAB 4: CONVOLUTION
Background & Concepts
Convolution is denoted by:
𝑦[𝑛] = 𝑥[𝑛] ∗ ℎ[𝑛]
Your book has described the "flip and shift" method for performing convolution. First, we
set up two signals 𝑥[𝑘] and ℎ[𝑘]:
Flip one of the signals, say ℎ[𝑘], to form ℎ[−𝑘]:
ELEG 320L – Signals & Systems Laboratory /Dr. Jibran Khan Yousafzai Lab 4
2
Shift ℎ[−𝑘] by n to form ℎ[𝑛 − 𝑘]. For each value of 𝑛, form 𝑦[𝑛] by multiplying and
summing all the element of the product of𝑥[𝑘]ℎ[𝑛 − 𝑘], −∞ < 𝑘 < ∞. The figure
below shows an example of the calculation of𝑦[1]. The top panel shows𝑥[𝑘]. The
middle panel showsℎ[1 − 𝑘]. The lower panel shows𝑥[𝑘]𝑦[1 − 𝑘]. Note that this is a
sequence on a 𝑘 axis. The sum of the lower sequence over all k gives 𝑦[1] = 2.
We repeat this shifting, multiplication and summing for all values of 𝑛 to get the
complete sequence 𝑦[𝑛]:
ELEG 320L – Signals & Systems Laboratory /Dr. Jibran Khan Yousafzai Lab 4
3
The conv Command
conv(x,h) performs a 1-D convolution of vectors 𝑥 and ℎ. The resulting vector 𝑦
has length length(𝑦) = length(𝑥) + length(ℎ) − 1. Imagine vector 𝑥 as being
stationary and the flipped version of ℎ is slid from left to right. Note that conv(x,h) =
conv(h,x). An example of the convolution of two signals and plotting the result is
below:
>> x = [0.5 0.5 0.5]; %define input signal x[n]
>> h = [3.0 2.0 1.0]; %unit-pulse response h[n]
>> y = conv(x,h); %compute output y[n] via convolution
>> n = 0:(length(y)-1); %for plotting y[n]
>> stem(n,y) % plot y[n]
>> grid;
>> xlabel('n');
>> ylabel('y[n]');
>> title('Output of System via Convolution');
ELEG 320L – Signals & Systems Laboratory /Dr. Jibran Khan Yousafzai Lab 4
4
Deconvolution
The command [q,r] = deconv(v,u), deconvolves vector u out of vector v, using long
division. The quotient is returned in vector q and the remainder in vector r such that
v = conv(u,q)+r. If u and v are vectors of polynomial coefficients, convolving them is
equivalent to multiplying the two polynomials, and deconvolution is polynomial
division. The result of dividing v by u is quotient q and remainder r. An examples is
below:
If
>> u = [1 2 3 4];
>> v = [10 20 30];
The convolution is:
>> c = conv(u,v)
c =
10 40 100 160 170 120
Use deconvolution to recover v.
>> [q,r] = deconv(c,u)
q =
10 20 30
r =
0 0 0 0 0 0
This gives a quotient equal to v and a zero remainder.
Structures
Structures in Matlab are just like structures in C. They are basically containers that
allow one
Electronic Media PresentationChoose two of the following.docx
Electronic Media Presentation
Choose
two of the following types of electronic media:
Radio
Sound recording
Motion pictures
Broadcast television
Research
the history of the media types your team selected. Include the following information in your presentation:
Introduction
Notable founders and parent organizations of your electronic media types
Notable historical dates
Dates of mergers with other radio stations, record production companies, motion picture companies, or television networks to form a large media conglomerate
Date the media types launched their websites, became active on the Internet, or became active in social media integration
Identify past, present, and future challenges confronting these types of media. How has the digital era affected them? Which types are best suited to adapt to the future? Explain why
How do these challenges affect advertising in these organizations--outside companies advertising--and advertising for these media--companies promoting themselves to others? What are innovative advertising strategies these media have engaged in?
What are two similarities and two differences between the two media types?
Conclusion
Present your Electronic Media Presentation.
These are 10- to 12-slideMicrosoft
®
PowerPoint
®
presentations with notes.
.
Electronic copy available at httpssrn.comabstract=2161742.docx
Electronic copy available at: http://ssrn.com/abstract=2161742
Electronic Commerce Business Models:
A Conceptual Framework
By
Utkarsh Majmudar
Ganesh N. Prabhu
July 2000
Please address all correspondence to:
Prof. Utkarsh Majmudar
Visiting Faculty (Finance & Control Area)
Indian Institute of Management
Bannerghatta Road
Bangalore - 560 076
India
Fax: (080) 6584050
E m a i l ! utkarsh&qimbxmeUn
Copies of the Working Papers may be obtained from the FPM & Research Office
Electronic copy available at: http://ssrn.com/abstract=2161742
Electronic Commerce Business Models: A Conceptual Framework
Utkarsh Majmudar and Ganesh N. Prabhu
Abstract
The recent boom in the new economy of internet based commerce has created a large
number of firms with a variety of business models that aim to leverage the power of the
internet to further their business goals. In this paper we attempt to provide a
conceptual framework for understanding e-commerce business models on a number of
important dimensions - nature of consumer activity, nature of e-commerce activity,
target customers, targeting strategy, revenue generating modes, procfactfcerwce
delivery modes, payment collection modes, operating modes, market places,
advantage mechanisms and domination characteristics. We also examine means of
improving value proposition and net-friendliness for e-commerce activities and identify
areas where e-commerce models have not been explored or fully exploited so far.
Since the range of economic activities on the internet is vast and growing, newer
models and opportunities are likely to emerge through improvements in internet
technologies as well as innovations in their application to business contexts. Hence
any conceptual framework on e-commerce business models, including our own, can
never be comprehensive.
Electronic Commerce Business Models: A Conceptual Framework - 1 -
Electronic copy available at: http://ssrn.com/abstract=2161742
Electronic Commerce Business Models: A Conceptual Framework
Introduction
The recent boom in the new economy of internet based commerce has spawned a large
number of firms with a variety of business models that aim to leverage the power of the internet to
further their business goals. This paper provides a conceptual framework for understanding these
business models and their characteristics. The conceptual framework is shown in Figure 1.
Locating Electronic Commerce in the Internet Economy
We define electronic commerce as use of the internet medium for conducting economic
transactions. Electronic commerce is a part of a larger internet economy. Conceptually, the internet
economy can be divided into four layers (Barua etal., 1999). Each layer of the internet economy is
listed below with descriptions of the types of companies and names of some of the actual companies in
each category.
(a) Layer One: The Internet Infrastructure Layer. This layer includes companies with products and
services that help cr.
Electronic Health RecordsInstructionsAs implementation of e.docx
Electronic Health Records
Instructions:
As implementation of electronic health records (EHRs) continues to grow, so does the liability and risk for health care providers. Assume the role of a manager for a small, community clinic. Your sponsoring entity (a large non-profit hospital system) will soon be adding your clinic to their EHR network. As the clinic manager, you must identify the vulnerabilities and potential risks your clinic and users could face with this implementation, as well as recognize the benefits.
Conduct research on EHR implementation, including benefits and risks.
From a managerial perspective, what concerns (legal, ethical and operational) do you have about the implementation?
How will having EHR benefit your patients and providers?
Please be sure to validate your opinions and ideas with citations and references in APA format.
Please post 2 peer responses.
In the response post, include the following:
Take your colleague's concerns into consideration. What advice can you offer to mitigate the risk involved? Include at least one scholarly source to support your advice.
Please be sure to validate your opinions and ideas with citations and references in APA format.
.
Electronic copy available at httpssrn.comabstract=2155540.docx
Electronic copy available at: http://ssrn.com/abstract=2155540
INDIA: a fab-less wonder: case of SMDP
A.S.Rao
[email protected]
Abstract
From IPod to I Pad, millions of electronics goods have rolled out of China, the global
manufacturing hub. India’s share of global electronic product market is less than 3%.
Taiwan had $72 billion of investment in Fabs, where as India stands out as one the
aspiring nation with no Fab. Yet, top 25 global semiconductor companies now have a
presence in India through their captive centers, working in cutting edge technology
nodes. Among the top twenty U.S. semiconductor companies, only two have not
established a design center in India. While, Government of India is not successful in
attracting manufacturing, appear to have made a significant contribution by focusing on
talent supply. Department of Information Technology (DIT) implemented Special
Manpower Development Programme in the area of VLSI design and related software
(SMDP) and trained over 20,000 engineers. This paper is about SMDP as case study
and is based on Impact Assessment of SMDP-II assigned by DIT on IIMA.
Prior to 1980s, the semiconductor industry was vertically integrated. Semiconductor companies
owned and operated their own silicon wafer fabrication facilities and developed their own
process technology for manufacturing their chips. These companies also carried out the
fabrication, assembly and testing of their chips. Innovative chip design start-ups and Taiwan’s
business model led to the birth of foundry industry.
South Korea and Taiwan
In Tiger Technology: Creation of a Semiconductor Industry in East Asia John A.
Mathews and Dong-Sung Cho gave a comparative account of the support given by
the Korean and Taiwanese states to their local semiconductor producers. South
Korean government considered semiconductors vital to the modernization of domestic
industries and manufacturing consumer electronics. The state used Korea’s large
conglomerates, or chaebol, as a vehicle to move into the industry through direct
brokerage with different firms and by offering substantial financial assistance.
Taiwanese government did not have the convenience of large conglomerates that could
be directed towards semiconductor production. Instead, the government sponsored
initiatives to develop a domestic industry through the establishment of research and
production capabilities before the creation of private firms.
At the same time, re-organization of production in the global economy also played an
equally integral part for the transformation of East Asia and the development of
domestic semiconductor industries in South Korea and Taiwan. In `Globalisation of High
Technology Production’, Jeffery Henderson places the focus of analysis on the
development of networks of production in the global semiconductor industry. He asserts
that these production networks developed after tran.
el señor DíazAddressing himTalking about himQues.docx
el señor Díaz
Addressing him:
Talking about him:
Question 2 with 2 blanksJimena y Marissa
Addressing them:
Talking about them:
Question 3 with 2 blanksMaru y Miguel
Addressing them:
Talking about them:
Question 4 with 2 blanksla profesora
Addressing her:
Talking about her:
Question 5 with 2 blanksun estudiante
Addressing him:
Talking about him:
Question 6 with 2 blanksel director de una escuela
Addressing him:
Talking about him:
Question 7 with 2 blankstres chicas
Addressing them:
Talking about them:
Question 8 with 2 blanksun pasajero de autobús
Addressing him:
Talking about him:
Question 9 with 2 blanksJuan Carlos y Felipe
Addressing them:
Talking about them:
Question 10 with 2 blanksuna turista
Addressing her:
Talking about her
.
Electrochemical Cells and Cell PotentialsObjective The pu.docx
Electrochemical Cells and Cell Potentials
Objective:
The purpose of this experiment is to create and experiment galvanic cell and collect/interpret data by using a multimeter to describe the flow of electrons. The we g=had to determine how it is calculated by using the formulas given.
Procedure:
Exercise 1: Construction of a Galvanic Cell
1. Gather all of the supplies listed in the materials list. 2. Use the scissors to cut a strip of the filter paper approximately 1.5 inches in width (1/4 the size of the sheet of filter paper). 3. Cut a strip of filter paper and fold the strip of filter paper in half (widthwise) and then in half again. 4. Folding the filter paper in half and then in half again and put on the safety gloves and goggles. 5. Create the salt bridge by carefully winding the folded filter paper into a circle so that it fits into the bottom of the 9 oz. plastic cup. Add the potassium chloride to the cup with the filter paper until the paper is completely covered with the potassium chloride. 6. Folded filter paper in cup. The potassium chloride is added to the cup to cover the filter paper. 7. Allow the paper to soak up the potassium chloride for a minimum of 10 minutes or until you are ready to add it to the galvanic cell, as described later in the experiment. 8. Place the 2 glass beakers on a table. Add approximately 45 ml of zinc sulfate (approximately ½ of the bottle) to one of the beakers. To the second beaker, add approximately 45 ml of copper sulfate. 9. Pick up a fresh strip of zinc and insert 1 end of it into the copper sulfate solution. After approximately 5 seconds, remove the zinc from the copper sulfate and place it on a piece of paper towel.10. Pick up a fresh strip of copper and insert 1 end of it into the zinc sulfate solution. After approximately 5 seconds, remove the copper from the zinc sulfate and place it on the piece of paper towel.11. Metal in solutions. A. Zinc being inserted into copper sulfate. B. Copper being inserted into zinc sulfate and observe the 2 metal strips and record observations in Data Table 1 in your Lab Report Assistant. 12. From the observations, determine which of the 2 reactions is spontaneous. Record this in the observations section of Data Table 1. 13. Set up the voltmeter as follows; a. Make sure the on/off switch of the voltmeter is in the "off" position. b. Place the end of the black probe into the bottom right hole of the voltmeter. c. Place the end of the red probe into the hole directly above the location of the black probe. d. Turn the voltage dial so that the arrow end of the dial is pointing to 20 DCV. e. Add 1 jumper cable clip to each end of the probes. It does not matter what color jumper cable clips are provided in your kit, or which color is attached to either probe. 14. Put the salt bridge into place by submerging 1 end on the copper sulfate and the other end in the zinc sulfate. Adjust the beakers as necessary so that the salt bridge does not sink between the beakers. .
Electricity Restructuringand Competition.docx
Electricity Restructuring
and Competition
Electricity MarketsTraditional Organization of Electricity Provision in U.S.Govt regulated, vertically integrated public utilitiesLast 25 YearsWave of restructuring and introduction of electricity trading and competition across U.S. and other nationsNow large-scale wholesale electricity markets operate across many parts of U.S.
Factors leading to restructuring & deregulation
Prior track record of deregulating energy markets and other industries once considered natural monopolies
telecomm, airlines, railroads,
High electricity prices in spite of regulation
In U.S. states such as NY, California, New England
In other countries, such as U.K.
As the U.S. electricity transmission grid was built out in the 2nd half of 20th century, electric utilities started buying and selling energy from each other
This illustrated feasibility of trading energy across the grid in markets
Political Push
2nd Bush President
Electricity Restructuring – A How-To GuideUnbundle generation from transmission and distributionIt’s important to allow multiple business firms to own and operate generation plants (independent power producers (IPPs) or merchant generators)This may require forcing some vertically integrated IOUs to divest some of their generation assets
Electricity Restructuring – A How-To GuideEstablish an organized market for wholesale electricity tradingSellers are firms like merchant generators that inject energy into the gridBuyers are retail distributors and industrial users that withdraw energy from the gridMarket rules might include an advance-trading (e.g., day-ahead) market as well as a real-time balancing market
Electricity Restructuring – A How-To GuideSet up an organization to manage and coordinate energy flows over the gridThis could be an independent system operator (ISO) or a regional transmission organization (RTO)Key responsibilitiesBalance energy supply and demand in real timeMaintain system reliabilityCoordinate new transmission investments
Wholesale Market Competition
Electricity Restructuring – A How-To GuideRetail distributionOwnership and operation of local distribution networks would typically continue as regulated public utilities (natural monopoly rationale)But it is feasible to introduce retail competition via brokers and energy re-sellers who purchase wholesale energy, re-sell it to retail customers, and pay fees to local distribution companies for use of the local network.
Wholesale Electricity MarketsLet’s examine a perfect competition model of a short-run (hourly) wholesale electricity marketDemand SideDemand varies hour by hour, as weather conditions and desired electricity usage changeVery price inelastic – most retail customers pay fixed retail pricesSupply SideMost supply comes from fossil fuel generatorsFF supply is driven by cost of generation and capacities of generation units.Generation from renewables is intermittent
Fossil Fuel Generation a.
Electrolytes and Minerals Table – Week 5 AssignmentMineralE.docx
Electrolytes and Minerals Table – Week 5 Assignment
Mineral/
Electrolyte
Name
Dietary Sources
Major Functions
Deficiency Symptoms
Toxicity Symptoms
Calcium
Chloride
Fluoride
Iodine
Iron
Magnesium
Phosphorous
Potassium
Sodium
Zinc
.
ElectriGov is a government agency whose mission is to supply ele.docx
ElectriGov is a government agency whose mission is to supply electric power to various locations in the United States. To accomplish this task, the organization has three line crews of five to ten men whose job it is to install high-voltage power lines. Each crew is highly cohesive, led by a foreman. Moreover, crew members have worked together for many years and have an established pattern for doing their work and solving problems. The work is hard, dirty, and dangerous. Almost all of the men have had a friend who has been seriously injured or killed while on the job.
The crews typically work independently, but when there are large projects to complete, they must work together. This can create serious conflicts, since the crews often don’t agree with each other’s approaches to organizing and managing a particular job, and none of the three foremen wants to be subservient to the others. Thus when line crews do large projects together, they tend to compete with one another rather than cooperate. On
one project, the conflict became so nasty that one crew failed to inform another crew that the wires were hot at a certain section of the project. This serious safety breach was reported to senior management, who immediately launched an investigation. We, as consultants, were initially asked to serve as part of the team investigating the causes of the safety violations.
After the initial investigation, we were asked by ElectriGov’s senior management to “clean up the conflicts” between the crews. The approach we used to help the crews reduce their conflicts was a variation on design A. All three crews were brought together in one room, and the need for an interteam development program was discussed. Each crew was asked to commit to solving the conflicts between themselves and the other crews and to agree to give the program a chance. Once we had their agreement, each crew was then asked to meet sepa- rately to list their perceptions of the other crews and the specific problems that they had in working with the others. After meeting separately, the teams came back together and each reported its perceptions of the other crews. In our consulting role, we facilitated the discussion, making sure that each crew’s perceptions were made clear and that each crew described the problematic behaviors of the other crews in concrete, specific terms. As a ground rule, crews were asked to be descriptive and to avoid using emotionally laden language when critiquing the other crews. After each crew presented its perceptions, the other crews could ask questions to clarify points, but the crews were not allowed to debate the validity of the other crews’ perceptions. After each crew aired its views, the crews, together in an open session, were then asked to come up with recommendations to improve the relationships. Their suggestions were listed on large poster boards in the room. The crews discussed how they might do more advanced planning on the larger projects to deter.
Electoral College – Good or BadThe Electoral College was create.docx
Electoral College – Good or Bad?
The Electoral College was created to protect US citizens against mob rule. Mob rule is the control of a lawful government system by a mass of people through violence and intimidation. However, some Americans question the legitimacy of this process. Pick one election where the outcome of the popular vote and the electoral college vote differed to create an argument in favor of or opposed to the use of the electoral college. List at least three valid points to support your argument. Present you argument in a PowerPoint presentation.
As you complete your presentation, be sure to:
· Use speaker's notes to expand upon the bullet point main ideas on your slides, making references to research and theory with citation.
· Proof your work
· Use visuals (pictures, video, narration, graphs, etc.) to compliment the text in your presentation and to reinforce your content.
· Do not just write a paper and copy chunks of it into each slide. Treat this as if you were going to give this presentation live.
Presentation Requirements (APA format)
· Length: 8-10 substantive slides (excluding cover and references slides)
· Font should not be smaller than size 16-point
· Parenthetical in-text citations included and formatted in APA style
· References slide (a minimum of 2 outside scholarly sources plus the textbook and/or the weekly lesson for each course outcome)
.
How to Break the cycle of negative Thoughts
We all have good and bad thoughts from time to time and situation to situation. We are bombarded daily with spiraling thoughts(both negative and positive) creating all-consuming feel , making us difficult to manage with associated suffering. Good thoughts are like our Mob Signal (Positive thought) amidst noise(negative thought) in the atmosphere. Negative thoughts like noise outweigh positive thoughts. These thoughts often create unwanted confusion, trouble, stress and frustration in our mind as well as chaos in our physical world. Negative thoughts are also known as “distorted thinking”.
Sectors of the Indian Economy - Class 10 Study Notes pdf
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
More Related Content
More from toltonkendal
Elements of Music Report InstrumentsFor the assignment on the el.docx
Elements of Music Report Instruments
For the assignment on the elements of music, students will write a report with a minimum of 300 words.
Students must select one element of music that they consider to be the most important element:
Melody
Rhythm
Harmony
Form
When writing the report, be sure you address the following questions:
Why did you select this element from among all the rest?
Do you think that all kinds of music could exist without your selected element? Elaborate on your view.
Describe a piece of music that highlights the use of your selected element.
I encourage students do research on their element of music in order to get ideas for their reports. All reports must be original works!
Do not quote any source or anybody’s thoughts. Quotes are not permitted in this Instruments Report. I am interested in your own personal thoughts, opinions, and the material you have learned from your research.
.
Elements of GenreAfter watching three of the five .docx
Elements of Genre
After watching three of the five movie clips listed in the
Multimedia
section, above, describe how they fit into a specific genre (or subgenre) as explained in the text. What elements of the film are characteristic of that genre? How does it fulfill the expectations of that genre? How does it play against these expectations?
Your initial post should be at least 150 words in length. Support your claims with examples from required material(s) and/or other scholarly resources, and properly cite any references.
.
Elements of DesignDuring the process of envisioning and designing .docx
Elements of Design
During the process of envisioning and designing a film, the director, production designer, and art director (in collaboration with the cinematographer) are concerned with several major spatial and temporal elements. These design elements punctuate and underscore the movement of figures within the frame, including the following: setting, lighting, costuming, makeup, and hairstyles. Choose a scene from movieclips.com. In a three to five page paper, (excluding the cover and reference pages) analyze the mise-en-scène.
Respond to the following prompts with at least one paragraph per bulleted topic:
Identify the names of the artists involved in the film’s production: the director, the production designer, and the art director. Describe in separate paragraphs each artist’s role in the overall design process. Conduct additional research if necessary, citing your book, film, and other external sources correctly in APA format.
Explain how the artists utilize lighting in the scene. How does the lighting affect our emotional understanding of certain characters? What sort of mood does the lighting evoke? How does lighting impact the overall story the filmmaker is attempting to tell?
Describe the setting, including the time period, location, and culture in which the film takes place.
Explain what costuming can tell us about a character. In what ways can costuming be used to reflect elements of the film's plot?
Explain how hairstyle and makeup can help tell the story. What might hairstyle and makeup reveal about the characters?
Discuss your opinion regarding the mise-en-scène. Do the elements appear to work together in a harmonious way? Does the scene seem discordant? Do you think the design elements are congruent with the filmmaker’s vision for the scene?
.
Elements of Critical Thinking [WLOs 2, 3, 4] [CLOs 2, 3, 4]P.docx
Elements of Critical Thinking [WLOs: 2, 3, 4] [CLOs: 2, 3, 4]
Prepare:
Prior to beginning work on this discussion forum, in preparation for discussing the importance of critical thinking skills,
Read the articles
Common Misconceptions of Critical Thinking
Combating Fake News in the Digital Age
6 Critical Thinking Skills You Need to Master Now (Links to an external site.)
Teaching and Learning in a Post-Truth world: It’s Time for Schools to Upgrade and Reinvest in Media Literacy Lessons
Critical Thinking and the Challenges of Internet (Links to an external site.)
Watch the videos
Fake News: Part 1 (Links to an external site.)
Critical Thinking
(Links to an external site.)
Review the resources
Critical Thinking Skills (Links to an external site.)
Valuable Intellectual Traits (Links to an external site.)
Critical Thinking Web (Links to an external site.)
Reflect:
Reflect on the characteristics of a critical thinker. Critical thinking gets you involved in a dialogue with the ideas you read from others in this class. To be a critical thinker, you need to be able to summarize, analyze, hypothesize, and evaluate new information that you encounter.
Write:
For this discussion, you will address the following prompts. Keep in mind that the article or video you’ve chosen should not be about critical thinking, but should be about someone making a statement, claim, or argument related to your Final Paper topic. One source should demonstrate good critical thinking skills and the other source should demonstrate the lack or absence of critical thinking skills. Personal examples should not be used.
Explain at least five elements of critical thinking that you found in the reading material.
Search the Internet, media, or the Ashford University Library, and find an example in which good critical thinking skills are being demonstrated by the author or speaker. Summarize the content and explain why you think it demonstrates good critical thinking skills.
Search the Internet, media, or the Ashford University Library, and find an example in which the author or speaker lacks good critical thinking skills. Summarize the content and explain why you think it demonstrates the absence of good, critical thinking skills.
Your initial post should be at least 250 words in length, which should include a thorough response to each prompt. You are required to provide in-text citations of applicable required reading materials and/or any other outside sources you use to support your claims. Provide full reference entries of all sources cited at the end of your response. Please use correct APA format when writing in-text citations (see
In-Text Citation Helper (Links to an external site.)
) and references (see
Formatting Your References List (Links to an external site.)
).
Reflecting on General Education and Career [WLOs: 2, 3, 4] [CLOs: 2, 3, 4]
Prepare:
Prior to beginning work on this discussion forum, read the articles
Teaching Writing S.
Elements of DesignDuring the process of envisioning and design.docx
Elements of Design
During the process of envisioning and designing a film, the director, production designer, and art director (in collaboration with the cinematographer) are concerned with several major spatial and temporal elements. These design elements punctuate and underscore the movement of figures within the frame, including the following: setting, lighting, costuming, makeup, and hairstyles. Choose a scene from movieclips.com. In a three to five page paper, (excluding the cover and reference pages) analyze the mise-en-scène.
Respond to the following prompts with at least one paragraph per bulleted topic:
Identify the names of the artists involved in the film’s production: the director, the production designer, and the art director. Describe in separate paragraphs each artist’s role in the overall design process. Conduct additional research if necessary, citing your book, film, and other external sources correctly in APA format.
Explain how the artists utilize lighting in the scene. How does the lighting affect our emotional understanding of certain characters? What sort of mood does the lighting evoke? How does lighting impact the overall story the filmmaker is attempting to tell?
Describe the setting, including the time period, location, and culture in which the film takes place.
Explain what costuming can tell us about a character. In what ways can costuming be used to reflect elements of the film's plot?
Explain how hairstyle and makeup can help tell the story. What might hairstyle and makeup reveal about the characters?
Discuss your opinion regarding the mise-en-scène. Do the elements appear to work together in a harmonious way? Does the scene seem discordant? Do you think the design elements are congruent with the filmmaker’s vision for the scene?
.
Elements of a contact due 16 OctRead the Case Campbell Soup Co. v..docx
Elements of a contact due 16 Oct
Read the Case Campbell Soup Co. v. Wentz in the text. Answer the following questions:
1. What were the terms of the contract between Campbell and the Wentzes?
2. Did the Wentzes perform under the contract?
3. Did the court find specific performance to be an adequate legal remedy in this case?
4. Why did the court refuse to help Campbell in enforcing its legal contract?
5. How could Campbell change its contract in the future so as to avoid the unconsionability problem?
Facts:
Per
a
written
contract
between
Campbell
Soup
Company
(a
New
Jersey
company)
and
the
Wentzes
(carrot
farmers
in
Pennsylvania),
the
Wentzes
would
deliver
to
Campbell
all
the
Chantenay
red
cored
carrots
to
be
grown
on
the
Wentz
farm
during
the
1947
season.
The
contract
price
for
the
carrots
was
$30
per
ton.
The
contract
between
Campbell
Soup
and
all
sellers
of
carrots
was
drafted
by
Campbell
and
it
had
a
provision
that
prohibited
farmers/sellers
from
selling
their
carrots
to
anyone
else,
except
those
carrots
that
were
rejected
by
Campbell.
The
contract
also
had
a
liquidated
damages
provision
of
$50
per
ton
if
the
seller
breached,
but
it
had
no
similar
provision
in
the
event
Campbell
breached.
The
contract
not
only
allowed
Campbell
to
reject
nonconforming
carrots,
but
gave
Campbell
the
right
to
determine
who
could
buy
the
carrots
it
had
rejected.
The
Wentzes
harvested
100
tons
of
carrots,
but
because
the
market
price
at
the
time
of
harvesting
was
$90
per
ton
for
these
rare
carrots,
the
Wentzes
refused
to
deliver
them
to
Campbell
and
sold
62
tons
of
their
carrots
to
a
farmer
who
sold
some
of
those
carrots
to
Campbell.
Campbell
sued
the
Wentzes,
asking
for
the
court's
order
to
stop
further
sale
of
the
contracted
carrots
to
others
and
to
compel
specific
performance
of
the
contract.
The
trial
court
ruled
for
the
Wentzes
and
Campbell
appealed.
Issues:
Is
specific
performance
an
appropriate
legal
remedy
in
this
case
or
is
the
contract
unconscionable?
Discussion:
In
January
1948,
it
was
virtually
impossible
to
obtain
Chantenay
carrots
in
the
open
market.
Campbell
used
Chantenay
carrots
(which
are
easier
to
process
for
soup
making
than
other
carrots)
in
large
quantities
and
furnishes
the
seeds
to
farmers
with
whom
it
contracts.
Campbell
contracted
for
carrots
long
ahead,
and
farmers
entered
into
the
contract
willingly.
If
the
facts
of
this
case
were
this
simple,
specific
performance
should
have
been
granted.
However,
the
problem
is
with
the
contract
itself,
which
was
one-sided.
According
to
the
appellate
court,
the
most
direct
example
of
unconscionability
was
the
provision
that,
under
certain
.
Elements for analyzing mise en sceneIdentify the components of.docx
Elements for analyzing mise en scene
Identify the components of the shot, but explaining the meaning or significance behind those components and connecting the shot to the themes of the film
1. Dominant: Where is the eye attracted first? Why?
2. Lighting key: High key? Low key? High contrast? Some combination of these?
3. Shot and camera proxemics: What type of shot? How far away is the camera from the action?
4. Angle: Is the viewer (through the eye of the camera) looking up or down on the subject? Or is the camera neutral (eye level)?
5. Color values: What is the dominant color? Are there contrasting foils? Is there color symbolism?
6. Lens/filter/stock: How do these distort or comment on the
photographed materials?
7. Subsidiary contrasts: What are the main eye-stops after taking in the dominant?
8. Density: How much visual information is packed into the image? Is the texture stark, moderate, or highly detailed?
9. Composition: How is the two-dimensional space segmented and organized? What is the underlying design?
10. Form: Open or closed? Does the image suggest a window that arbitrarily isolates a fragment of the scene? Or a proscenium arch, in which the visual elements are carefully arranged and held in balance?
11. Framing: Tight or loose? Do characters have little to no room to move, or can they move freely without impediments?
12. Depth: On how many planes is the image composed? Does the background or foreground comment in any way on the midground?
13. Character placement: What part of the framed space do the characters occupy? Center? Top? Bottom? Edges? Why?
14. Staging positions: Which way do the characters look vis-à-vis the camera?
15. Character proxemics: How much space is between the
characters?
What are the 4 distinct formal elements that make up a film's mise en scene?
• staging of the action
• physical setting and decor
• the manner in which these materials are framed
• the manner in which they are photographed
.
ELEG 421 Control Systems Transient and Steady State .docx
ELEG 421
Control Systems
Transient and Steady State
Response Analyses
Dr. Ashraf A. Zaher
American University of Kuwait
College of Arts and Science
Department of Electrical and Computer Engineering
Layout
2
Objectives
This chapter introduces the analysis of the time response of different
control systems under different scenarios. Only first and second order
systems will be considered in details using analytical and numerical
methods. Extension to higher order systems will be developed. Both
transient and steady state responses will be evaluated. Stability analysis
will be analyzed for different kinds of feedback, while investigating the
effect of both proportional and derivative control actions on the
performance of the closed-loop system. Finally systems types and
steady state errors will be calculated for unity feedback.
Outcomes
By the end of this chapter, students will be able to:
evaluate both transient/steady state responses for control systems,
analyze the stability of closed-loop LTI systems,
investigate the effect of P and I control actions on performance, and
understand dominant dynamics of higher order systems.
Dr. Ashraf Zaher
Introduction
3
Test signals
Transient response
Steady state response
Analytical techniques, and
Numerical (simulation) techniques.
Stability (definition and analysis methods),
Relative stability, and
Effect of P/I control actions on stability and performance.
Summary of the used systems:
First order systems,
Second order systems, and
Higher order systems.
Dr. Ashraf Zaher
Test Signals
4 Dr. Ashraf Zaher
Impulse function:
Used to simulate shock inputs,
Laplace transform: 1.
Step function:
Used to simulate sudden disturbances,
Laplace transform: 1/s.
Ramp function:
Used to simulate gradually changing inputs,
Laplace transform: 1/s2.
Sinusoidal function(s):
Used to test response to a certain frequency,
Laplace transform: s/(s2+ω2) for cos(ωt) and ω/(s2+ω2) for sin(ωt).
White noise function:
Used to simulate random noise,
It is a stochastic signal that is easier to deal with in the time domain.
Total response:
C(s) = R(s)*TF(s) = Ctr(s) + Css(s) → c(t) = ctr(t) + css(t)
Fundamentals
5 Dr. Ashraf Zaher
Definitions:
Zeros (Z) of the TF
Poles (P) of the TF
Transient Response (Natural)
Steady State Response (Forced)
Total Response
Limits:
Initial values
Final values
Systems (?Zs):
First order (one P)
Second order (two Ps)
Higher order!
More:
Stability and relative stability
Steady state errors (unity feedback)
First Order Systems
6 Dr. Ashraf Zaher
TF:
T: time constant
Unit Step Response:
1
1
)(
)(
+
=
TssR
sC
)/1(
11
1
1
1
11
)(
TssTs
T
sTss
sC
+
−=
+
−=
+
=
Ttetc /1)( −−=
632.01)( 1 =−== −eTtc
T
e
Tdt
tdc Tt
t
11)( /
0
== −
=
01)0( 0 =−== etc
11)( =−=∞= −∞etc
First Order Systems.
Element 010 ASSIGNMENT 3000 WORDS (100)Task Individual assign.docx
Element 010 ASSIGNMENT: 3000 WORDS (100%)
Task: Individual assignment (3000 words)
Weighting: 100%
Assessment Case Study:
Greenland Garden Centre
[1]
Jon Smith spread his arms widely as he surveyed his garden centre.
‘Of course the whole market for leisure products and services, especially garden-related products, has been expanding over the last few years. Even so, we have been particularly successful. Partly this is because we are conveniently located, but it is also because we have developed a reputation for excellent service. Customers like coming to us for advice. We have also been successful in attracting some of the ‘personality gardeners’ from television to make special appearances. My main ambition now is to fully develop all of our twelve hectares to make the centre a place people will want to visit in its own right. I envisage the centre developing into almost a mini gardening theme park with special gardens, beautiful grounds and special events.’
Greenland is a large village situated in the Cotswolds, a popular tourist area of the UK. It has an interesting range of shops and restaurants, mainly catering for the tourist trade. About half a mile outside the village is the Greenland Garden Centre. The garden centre is served by a good network of main roads but is inaccessible by public transport.
Growth over the last five years has been dramatic and the garden centre now sells many other goods as well as gardening requisites. It also has a restaurant. It is open seven days a week, only closing on Christmas Day. Its opening hours are Monday– Saturday 9 a.m. to 6 p.m. and Sunday 10 a.m. to 5 p.m. all year round.
Outside the centre
The centre has a large car park which can accommodate about 350 cars. Outside the entrance a map indicates the various areas in the garden centre. Most customers walk round the grounds before making their purchases. The length of time people spend in the centre varies but, according to a recent study, averages 53 minutes during the week and 73 minutes at weekends.
The same study shows the extent to which the number of customers arriving at the garden centre varies depending on the time of year, day of the week, and time of day. There are two peaks in customer numbers, one during the late spring/early summer period and another in the build up to Christmas, as Greenland puts on particularly good Christmas displays.
Indoor sales area
The range of goods has increased dramatically over the past few years and now includes items such as:
pets and aquatics
seeds
fertilisers
indoor pots and plants
gardening equipment
garden lighting
conservatory-style furniture
outdoor clothing
picture gallery
books and toys
delicatessen
wine
kitchen equipment
soft furnishing
outdoor eating equipment
gifts, stationery, cards, aromatherapy products
freshly cut flowers
dried flowers.
Outside sales area
In the open air and in large glasshouses there is a complete range of plants, shrubs and trees. Gre.
ELEG 320L – Signals & Systems Laboratory Dr. Jibran Khan Yous.docx
ELEG 320L – Signals & Systems Laboratory /Dr. Jibran Khan Yousafzai Lab 4
1
LAB 4: CONVOLUTION
Background & Concepts
Convolution is denoted by:
𝑦[𝑛] = 𝑥[𝑛] ∗ ℎ[𝑛]
Your book has described the "flip and shift" method for performing convolution. First, we
set up two signals 𝑥[𝑘] and ℎ[𝑘]:
Flip one of the signals, say ℎ[𝑘], to form ℎ[−𝑘]:
ELEG 320L – Signals & Systems Laboratory /Dr. Jibran Khan Yousafzai Lab 4
2
Shift ℎ[−𝑘] by n to form ℎ[𝑛 − 𝑘]. For each value of 𝑛, form 𝑦[𝑛] by multiplying and
summing all the element of the product of𝑥[𝑘]ℎ[𝑛 − 𝑘], −∞ < 𝑘 < ∞. The figure
below shows an example of the calculation of𝑦[1]. The top panel shows𝑥[𝑘]. The
middle panel showsℎ[1 − 𝑘]. The lower panel shows𝑥[𝑘]𝑦[1 − 𝑘]. Note that this is a
sequence on a 𝑘 axis. The sum of the lower sequence over all k gives 𝑦[1] = 2.
We repeat this shifting, multiplication and summing for all values of 𝑛 to get the
complete sequence 𝑦[𝑛]:
ELEG 320L – Signals & Systems Laboratory /Dr. Jibran Khan Yousafzai Lab 4
3
The conv Command
conv(x,h) performs a 1-D convolution of vectors 𝑥 and ℎ. The resulting vector 𝑦
has length length(𝑦) = length(𝑥) + length(ℎ) − 1. Imagine vector 𝑥 as being
stationary and the flipped version of ℎ is slid from left to right. Note that conv(x,h) =
conv(h,x). An example of the convolution of two signals and plotting the result is
below:
>> x = [0.5 0.5 0.5]; %define input signal x[n]
>> h = [3.0 2.0 1.0]; %unit-pulse response h[n]
>> y = conv(x,h); %compute output y[n] via convolution
>> n = 0:(length(y)-1); %for plotting y[n]
>> stem(n,y) % plot y[n]
>> grid;
>> xlabel('n');
>> ylabel('y[n]');
>> title('Output of System via Convolution');
ELEG 320L – Signals & Systems Laboratory /Dr. Jibran Khan Yousafzai Lab 4
4
Deconvolution
The command [q,r] = deconv(v,u), deconvolves vector u out of vector v, using long
division. The quotient is returned in vector q and the remainder in vector r such that
v = conv(u,q)+r. If u and v are vectors of polynomial coefficients, convolving them is
equivalent to multiplying the two polynomials, and deconvolution is polynomial
division. The result of dividing v by u is quotient q and remainder r. An examples is
below:
If
>> u = [1 2 3 4];
>> v = [10 20 30];
The convolution is:
>> c = conv(u,v)
c =
10 40 100 160 170 120
Use deconvolution to recover v.
>> [q,r] = deconv(c,u)
q =
10 20 30
r =
0 0 0 0 0 0
This gives a quotient equal to v and a zero remainder.
Structures
Structures in Matlab are just like structures in C. They are basically containers that
allow one
Electronic Media PresentationChoose two of the following.docx
Electronic Media Presentation
Choose
two of the following types of electronic media:
Radio
Sound recording
Motion pictures
Broadcast television
Research
the history of the media types your team selected. Include the following information in your presentation:
Introduction
Notable founders and parent organizations of your electronic media types
Notable historical dates
Dates of mergers with other radio stations, record production companies, motion picture companies, or television networks to form a large media conglomerate
Date the media types launched their websites, became active on the Internet, or became active in social media integration
Identify past, present, and future challenges confronting these types of media. How has the digital era affected them? Which types are best suited to adapt to the future? Explain why
How do these challenges affect advertising in these organizations--outside companies advertising--and advertising for these media--companies promoting themselves to others? What are innovative advertising strategies these media have engaged in?
What are two similarities and two differences between the two media types?
Conclusion
Present your Electronic Media Presentation.
These are 10- to 12-slideMicrosoft
®
PowerPoint
®
presentations with notes.
.
Electronic copy available at httpssrn.comabstract=2161742.docx
Electronic copy available at: http://ssrn.com/abstract=2161742
Electronic Commerce Business Models:
A Conceptual Framework
By
Utkarsh Majmudar
Ganesh N. Prabhu
July 2000
Please address all correspondence to:
Prof. Utkarsh Majmudar
Visiting Faculty (Finance & Control Area)
Indian Institute of Management
Bannerghatta Road
Bangalore - 560 076
India
Fax: (080) 6584050
E m a i l ! utkarsh&qimbxmeUn
Copies of the Working Papers may be obtained from the FPM & Research Office
Electronic copy available at: http://ssrn.com/abstract=2161742
Electronic Commerce Business Models: A Conceptual Framework
Utkarsh Majmudar and Ganesh N. Prabhu
Abstract
The recent boom in the new economy of internet based commerce has created a large
number of firms with a variety of business models that aim to leverage the power of the
internet to further their business goals. In this paper we attempt to provide a
conceptual framework for understanding e-commerce business models on a number of
important dimensions - nature of consumer activity, nature of e-commerce activity,
target customers, targeting strategy, revenue generating modes, procfactfcerwce
delivery modes, payment collection modes, operating modes, market places,
advantage mechanisms and domination characteristics. We also examine means of
improving value proposition and net-friendliness for e-commerce activities and identify
areas where e-commerce models have not been explored or fully exploited so far.
Since the range of economic activities on the internet is vast and growing, newer
models and opportunities are likely to emerge through improvements in internet
technologies as well as innovations in their application to business contexts. Hence
any conceptual framework on e-commerce business models, including our own, can
never be comprehensive.
Electronic Commerce Business Models: A Conceptual Framework - 1 -
Electronic copy available at: http://ssrn.com/abstract=2161742
Electronic Commerce Business Models: A Conceptual Framework
Introduction
The recent boom in the new economy of internet based commerce has spawned a large
number of firms with a variety of business models that aim to leverage the power of the internet to
further their business goals. This paper provides a conceptual framework for understanding these
business models and their characteristics. The conceptual framework is shown in Figure 1.
Locating Electronic Commerce in the Internet Economy
We define electronic commerce as use of the internet medium for conducting economic
transactions. Electronic commerce is a part of a larger internet economy. Conceptually, the internet
economy can be divided into four layers (Barua etal., 1999). Each layer of the internet economy is
listed below with descriptions of the types of companies and names of some of the actual companies in
each category.
(a) Layer One: The Internet Infrastructure Layer. This layer includes companies with products and
services that help cr.
Electronic Health RecordsInstructionsAs implementation of e.docx
Electronic Health Records
Instructions:
As implementation of electronic health records (EHRs) continues to grow, so does the liability and risk for health care providers. Assume the role of a manager for a small, community clinic. Your sponsoring entity (a large non-profit hospital system) will soon be adding your clinic to their EHR network. As the clinic manager, you must identify the vulnerabilities and potential risks your clinic and users could face with this implementation, as well as recognize the benefits.
Conduct research on EHR implementation, including benefits and risks.
From a managerial perspective, what concerns (legal, ethical and operational) do you have about the implementation?
How will having EHR benefit your patients and providers?
Please be sure to validate your opinions and ideas with citations and references in APA format.
Please post 2 peer responses.
In the response post, include the following:
Take your colleague's concerns into consideration. What advice can you offer to mitigate the risk involved? Include at least one scholarly source to support your advice.
Please be sure to validate your opinions and ideas with citations and references in APA format.
.
Electronic copy available at httpssrn.comabstract=2155540.docx
Electronic copy available at: http://ssrn.com/abstract=2155540
INDIA: a fab-less wonder: case of SMDP
A.S.Rao
[email protected]
Abstract
From IPod to I Pad, millions of electronics goods have rolled out of China, the global
manufacturing hub. India’s share of global electronic product market is less than 3%.
Taiwan had $72 billion of investment in Fabs, where as India stands out as one the
aspiring nation with no Fab. Yet, top 25 global semiconductor companies now have a
presence in India through their captive centers, working in cutting edge technology
nodes. Among the top twenty U.S. semiconductor companies, only two have not
established a design center in India. While, Government of India is not successful in
attracting manufacturing, appear to have made a significant contribution by focusing on
talent supply. Department of Information Technology (DIT) implemented Special
Manpower Development Programme in the area of VLSI design and related software
(SMDP) and trained over 20,000 engineers. This paper is about SMDP as case study
and is based on Impact Assessment of SMDP-II assigned by DIT on IIMA.
Prior to 1980s, the semiconductor industry was vertically integrated. Semiconductor companies
owned and operated their own silicon wafer fabrication facilities and developed their own
process technology for manufacturing their chips. These companies also carried out the
fabrication, assembly and testing of their chips. Innovative chip design start-ups and Taiwan’s
business model led to the birth of foundry industry.
South Korea and Taiwan
In Tiger Technology: Creation of a Semiconductor Industry in East Asia John A.
Mathews and Dong-Sung Cho gave a comparative account of the support given by
the Korean and Taiwanese states to their local semiconductor producers. South
Korean government considered semiconductors vital to the modernization of domestic
industries and manufacturing consumer electronics. The state used Korea’s large
conglomerates, or chaebol, as a vehicle to move into the industry through direct
brokerage with different firms and by offering substantial financial assistance.
Taiwanese government did not have the convenience of large conglomerates that could
be directed towards semiconductor production. Instead, the government sponsored
initiatives to develop a domestic industry through the establishment of research and
production capabilities before the creation of private firms.
At the same time, re-organization of production in the global economy also played an
equally integral part for the transformation of East Asia and the development of
domestic semiconductor industries in South Korea and Taiwan. In `Globalisation of High
Technology Production’, Jeffery Henderson places the focus of analysis on the
development of networks of production in the global semiconductor industry. He asserts
that these production networks developed after tran.
el señor DíazAddressing himTalking about himQues.docx
el señor Díaz
Addressing him:
Talking about him:
Question 2 with 2 blanksJimena y Marissa
Addressing them:
Talking about them:
Question 3 with 2 blanksMaru y Miguel
Addressing them:
Talking about them:
Question 4 with 2 blanksla profesora
Addressing her:
Talking about her:
Question 5 with 2 blanksun estudiante
Addressing him:
Talking about him:
Question 6 with 2 blanksel director de una escuela
Addressing him:
Talking about him:
Question 7 with 2 blankstres chicas
Addressing them:
Talking about them:
Question 8 with 2 blanksun pasajero de autobús
Addressing him:
Talking about him:
Question 9 with 2 blanksJuan Carlos y Felipe
Addressing them:
Talking about them:
Question 10 with 2 blanksuna turista
Addressing her:
Talking about her
.
Electrochemical Cells and Cell PotentialsObjective The pu.docx
Electrochemical Cells and Cell Potentials
Objective:
The purpose of this experiment is to create and experiment galvanic cell and collect/interpret data by using a multimeter to describe the flow of electrons. The we g=had to determine how it is calculated by using the formulas given.
Procedure:
Exercise 1: Construction of a Galvanic Cell
1. Gather all of the supplies listed in the materials list. 2. Use the scissors to cut a strip of the filter paper approximately 1.5 inches in width (1/4 the size of the sheet of filter paper). 3. Cut a strip of filter paper and fold the strip of filter paper in half (widthwise) and then in half again. 4. Folding the filter paper in half and then in half again and put on the safety gloves and goggles. 5. Create the salt bridge by carefully winding the folded filter paper into a circle so that it fits into the bottom of the 9 oz. plastic cup. Add the potassium chloride to the cup with the filter paper until the paper is completely covered with the potassium chloride. 6. Folded filter paper in cup. The potassium chloride is added to the cup to cover the filter paper. 7. Allow the paper to soak up the potassium chloride for a minimum of 10 minutes or until you are ready to add it to the galvanic cell, as described later in the experiment. 8. Place the 2 glass beakers on a table. Add approximately 45 ml of zinc sulfate (approximately ½ of the bottle) to one of the beakers. To the second beaker, add approximately 45 ml of copper sulfate. 9. Pick up a fresh strip of zinc and insert 1 end of it into the copper sulfate solution. After approximately 5 seconds, remove the zinc from the copper sulfate and place it on a piece of paper towel.10. Pick up a fresh strip of copper and insert 1 end of it into the zinc sulfate solution. After approximately 5 seconds, remove the copper from the zinc sulfate and place it on the piece of paper towel.11. Metal in solutions. A. Zinc being inserted into copper sulfate. B. Copper being inserted into zinc sulfate and observe the 2 metal strips and record observations in Data Table 1 in your Lab Report Assistant. 12. From the observations, determine which of the 2 reactions is spontaneous. Record this in the observations section of Data Table 1. 13. Set up the voltmeter as follows; a. Make sure the on/off switch of the voltmeter is in the "off" position. b. Place the end of the black probe into the bottom right hole of the voltmeter. c. Place the end of the red probe into the hole directly above the location of the black probe. d. Turn the voltage dial so that the arrow end of the dial is pointing to 20 DCV. e. Add 1 jumper cable clip to each end of the probes. It does not matter what color jumper cable clips are provided in your kit, or which color is attached to either probe. 14. Put the salt bridge into place by submerging 1 end on the copper sulfate and the other end in the zinc sulfate. Adjust the beakers as necessary so that the salt bridge does not sink between the beakers. .
Electricity Restructuringand Competition.docx
Electricity Restructuring
and Competition
Electricity MarketsTraditional Organization of Electricity Provision in U.S.Govt regulated, vertically integrated public utilitiesLast 25 YearsWave of restructuring and introduction of electricity trading and competition across U.S. and other nationsNow large-scale wholesale electricity markets operate across many parts of U.S.
Factors leading to restructuring & deregulation
Prior track record of deregulating energy markets and other industries once considered natural monopolies
telecomm, airlines, railroads,
High electricity prices in spite of regulation
In U.S. states such as NY, California, New England
In other countries, such as U.K.
As the U.S. electricity transmission grid was built out in the 2nd half of 20th century, electric utilities started buying and selling energy from each other
This illustrated feasibility of trading energy across the grid in markets
Political Push
2nd Bush President
Electricity Restructuring – A How-To GuideUnbundle generation from transmission and distributionIt’s important to allow multiple business firms to own and operate generation plants (independent power producers (IPPs) or merchant generators)This may require forcing some vertically integrated IOUs to divest some of their generation assets
Electricity Restructuring – A How-To GuideEstablish an organized market for wholesale electricity tradingSellers are firms like merchant generators that inject energy into the gridBuyers are retail distributors and industrial users that withdraw energy from the gridMarket rules might include an advance-trading (e.g., day-ahead) market as well as a real-time balancing market
Electricity Restructuring – A How-To GuideSet up an organization to manage and coordinate energy flows over the gridThis could be an independent system operator (ISO) or a regional transmission organization (RTO)Key responsibilitiesBalance energy supply and demand in real timeMaintain system reliabilityCoordinate new transmission investments
Wholesale Market Competition
Electricity Restructuring – A How-To GuideRetail distributionOwnership and operation of local distribution networks would typically continue as regulated public utilities (natural monopoly rationale)But it is feasible to introduce retail competition via brokers and energy re-sellers who purchase wholesale energy, re-sell it to retail customers, and pay fees to local distribution companies for use of the local network.
Wholesale Electricity MarketsLet’s examine a perfect competition model of a short-run (hourly) wholesale electricity marketDemand SideDemand varies hour by hour, as weather conditions and desired electricity usage changeVery price inelastic – most retail customers pay fixed retail pricesSupply SideMost supply comes from fossil fuel generatorsFF supply is driven by cost of generation and capacities of generation units.Generation from renewables is intermittent
Fossil Fuel Generation a.
Electrolytes and Minerals Table – Week 5 AssignmentMineralE.docx
Electrolytes and Minerals Table – Week 5 Assignment
Mineral/
Electrolyte
Name
Dietary Sources
Major Functions
Deficiency Symptoms
Toxicity Symptoms
Calcium
Chloride
Fluoride
Iodine
Iron
Magnesium
Phosphorous
Potassium
Sodium
Zinc
.
ElectriGov is a government agency whose mission is to supply ele.docx
ElectriGov is a government agency whose mission is to supply electric power to various locations in the United States. To accomplish this task, the organization has three line crews of five to ten men whose job it is to install high-voltage power lines. Each crew is highly cohesive, led by a foreman. Moreover, crew members have worked together for many years and have an established pattern for doing their work and solving problems. The work is hard, dirty, and dangerous. Almost all of the men have had a friend who has been seriously injured or killed while on the job.
The crews typically work independently, but when there are large projects to complete, they must work together. This can create serious conflicts, since the crews often don’t agree with each other’s approaches to organizing and managing a particular job, and none of the three foremen wants to be subservient to the others. Thus when line crews do large projects together, they tend to compete with one another rather than cooperate. On
one project, the conflict became so nasty that one crew failed to inform another crew that the wires were hot at a certain section of the project. This serious safety breach was reported to senior management, who immediately launched an investigation. We, as consultants, were initially asked to serve as part of the team investigating the causes of the safety violations.
After the initial investigation, we were asked by ElectriGov’s senior management to “clean up the conflicts” between the crews. The approach we used to help the crews reduce their conflicts was a variation on design A. All three crews were brought together in one room, and the need for an interteam development program was discussed. Each crew was asked to commit to solving the conflicts between themselves and the other crews and to agree to give the program a chance. Once we had their agreement, each crew was then asked to meet sepa- rately to list their perceptions of the other crews and the specific problems that they had in working with the others. After meeting separately, the teams came back together and each reported its perceptions of the other crews. In our consulting role, we facilitated the discussion, making sure that each crew’s perceptions were made clear and that each crew described the problematic behaviors of the other crews in concrete, specific terms. As a ground rule, crews were asked to be descriptive and to avoid using emotionally laden language when critiquing the other crews. After each crew presented its perceptions, the other crews could ask questions to clarify points, but the crews were not allowed to debate the validity of the other crews’ perceptions. After each crew aired its views, the crews, together in an open session, were then asked to come up with recommendations to improve the relationships. Their suggestions were listed on large poster boards in the room. The crews discussed how they might do more advanced planning on the larger projects to deter.
Electoral College – Good or BadThe Electoral College was create.docx
Electoral College – Good or Bad?
The Electoral College was created to protect US citizens against mob rule. Mob rule is the control of a lawful government system by a mass of people through violence and intimidation. However, some Americans question the legitimacy of this process. Pick one election where the outcome of the popular vote and the electoral college vote differed to create an argument in favor of or opposed to the use of the electoral college. List at least three valid points to support your argument. Present you argument in a PowerPoint presentation.
As you complete your presentation, be sure to:
· Use speaker's notes to expand upon the bullet point main ideas on your slides, making references to research and theory with citation.
· Proof your work
· Use visuals (pictures, video, narration, graphs, etc.) to compliment the text in your presentation and to reinforce your content.
· Do not just write a paper and copy chunks of it into each slide. Treat this as if you were going to give this presentation live.
Presentation Requirements (APA format)
· Length: 8-10 substantive slides (excluding cover and references slides)
· Font should not be smaller than size 16-point
· Parenthetical in-text citations included and formatted in APA style
· References slide (a minimum of 2 outside scholarly sources plus the textbook and/or the weekly lesson for each course outcome)
.
More from toltonkendal (20)
Elements of Music Report InstrumentsFor the assignment on the el.docx
Elements of Music Report InstrumentsFor the assignment on the el.docx
Elements of GenreAfter watching three of the five .docx
Elements of GenreAfter watching three of the five .docx
Elements of DesignDuring the process of envisioning and designing .docx
Elements of DesignDuring the process of envisioning and designing .docx
Elements of Critical Thinking [WLOs 2, 3, 4] [CLOs 2, 3, 4]P.docx
Elements of Critical Thinking [WLOs 2, 3, 4] [CLOs 2, 3, 4]P.docx
Elements of DesignDuring the process of envisioning and design.docx
Elements of DesignDuring the process of envisioning and design.docx
Elements of a contact due 16 OctRead the Case Campbell Soup Co. v..docx
Elements of a contact due 16 OctRead the Case Campbell Soup Co. v..docx
Elements for analyzing mise en sceneIdentify the components of.docx
Elements for analyzing mise en sceneIdentify the components of.docx
ELEG 421 Control Systems Transient and Steady State .docx
ELEG 421 Control Systems Transient and Steady State .docx
Element 010 ASSIGNMENT 3000 WORDS (100)Task Individual assign.docx
Element 010 ASSIGNMENT 3000 WORDS (100)Task Individual assign.docx
ELEG 320L – Signals & Systems Laboratory Dr. Jibran Khan Yous.docx
ELEG 320L – Signals & Systems Laboratory Dr. Jibran Khan Yous.docx
Electronic Media PresentationChoose two of the following.docx
Electronic Media PresentationChoose two of the following.docx
Electronic copy available at httpssrn.comabstract=2161742.docx
Electronic copy available at httpssrn.comabstract=2161742.docx
Electronic Health RecordsInstructionsAs implementation of e.docx
Electronic Health RecordsInstructionsAs implementation of e.docx
Electronic copy available at httpssrn.comabstract=2155540.docx
Electronic copy available at httpssrn.comabstract=2155540.docx
el señor DíazAddressing himTalking about himQues.docx
el señor DíazAddressing himTalking about himQues.docx
Electrochemical Cells and Cell PotentialsObjective The pu.docx
Electrochemical Cells and Cell PotentialsObjective The pu.docx
Electrolytes and Minerals Table – Week 5 AssignmentMineralE.docx
Electrolytes and Minerals Table – Week 5 AssignmentMineralE.docx
ElectriGov is a government agency whose mission is to supply ele.docx
ElectriGov is a government agency whose mission is to supply ele.docx
Electoral College – Good or BadThe Electoral College was create.docx
Electoral College – Good or BadThe Electoral College was create.docx
Recently uploaded
How to Break the cycle of negative Thoughts
We all have good and bad thoughts from time to time and situation to situation. We are bombarded daily with spiraling thoughts(both negative and positive) creating all-consuming feel , making us difficult to manage with associated suffering. Good thoughts are like our Mob Signal (Positive thought) amidst noise(negative thought) in the atmosphere. Negative thoughts like noise outweigh positive thoughts. These thoughts often create unwanted confusion, trouble, stress and frustration in our mind as well as chaos in our physical world. Negative thoughts are also known as “distorted thinking”.
Sectors of the Indian Economy - Class 10 Study Notes pdf
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
The approach at University of Liverpool.pptx
How libraries can support authors with open access requirements for UKRI funded books
Wednesday 22 May 2024, 14:00-15:00.
GIÁO ÁN DẠY THÊM (KẾ HOẠCH BÀI BUỔI 2) - TIẾNG ANH 8 GLOBAL SUCCESS (2 CỘT) N...
GIÁO ÁN DẠY THÊM (KẾ HOẠCH BÀI BUỔI 2) - TIẾNG ANH 8 GLOBAL SUCCESS (2 CỘT) N...Nguyen Thanh Tu Collection
https://app.box.com/s/4hfk1xwgxnova7f4dm37birdzflj806wspecial B.ed 2nd year old paper_20240531.pdf
Instagram:-
https://instagram.com/special_education_needs_01?igshid=YmMyMTA2M2Y=
WhatsApp:-
https://chat.whatsapp.com/JVakNIYlSV94x7bwunO3Dc
YouTube:-
https://youtube.com/@special_education_needs
Teligram :- https://t.me/special_education_needs
Slide Shere :-
https://www.slideshare.net/shabnambano20?utm_campaign=profiletracking&utm_medium=sssite&utm_source=ssslideview
ESC Beyond Borders _From EU to You_ InfoPack general.pdf
ESC Beyond Borders _From EU to You_ InfoPack general.pdfFundacja Rozwoju Społeczeństwa Przedsiębiorczego
Wolontariat grupowyThe geography of Taylor Swift - some ideas
Geographical themes connected with Taylor Swift's ERAS tour - coming to the UK in June 2024
Overview on Edible Vaccine: Pros & Cons with Mechanism
This ppt include the description of the edible vaccine i.e. a new concept over the traditional vaccine administered by injection.
Unit 2- Research Aptitude (UGC NET Paper I).pdf
This slide describes the research aptitude of unit 2 in the UGC NET paper I.
Template Jadual Bertugas Kelas (Boleh Edit)
Jadual Bertugas kelas dalam bentuk softcopy PowerPoint. Cikgu boleh download >> edit >> print >> laminate. Semoga bermanfaat.
CLASS 11 CBSE B.St Project AIDS TO TRADE - INSURANCE
Class 11 CBSE Business Studies Project ( AIDS TO TRADE - INSURANCE)
Synthetic Fiber Construction in lab .pptx
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH ANSWERS.
MARUTI SUZUKI- A Successful Joint Venture in India.pptx
Let us know about Maruti Suzuki, a successful Joint venture in India.
Unit 8 - Information and Communication Technology (Paper I).pdf
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
Palestine last event orientationfvgnh .pptx
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
How to Create Map Views in the Odoo 17 ERP
The map views are useful for providing a geographical representation of data. They allow users to visualize and analyze the data in a more intuitive manner.
Home assignment II on Spectroscopy 2024 Answers.pdf
Answers to Home assignment on UV-Visible spectroscopy: Calculation of wavelength of UV-Visible absorption
Recently uploaded (20)
Sectors of the Indian Economy - Class 10 Study Notes pdf
Sectors of the Indian Economy - Class 10 Study Notes pdf
GIÁO ÁN DẠY THÊM (KẾ HOẠCH BÀI BUỔI 2) - TIẾNG ANH 8 GLOBAL SUCCESS (2 CỘT) N...
GIÁO ÁN DẠY THÊM (KẾ HOẠCH BÀI BUỔI 2) - TIẾNG ANH 8 GLOBAL SUCCESS (2 CỘT) N...
ESC Beyond Borders _From EU to You_ InfoPack general.pdf
ESC Beyond Borders _From EU to You_ InfoPack general.pdf
Overview on Edible Vaccine: Pros & Cons with Mechanism
Overview on Edible Vaccine: Pros & Cons with Mechanism
CLASS 11 CBSE B.St Project AIDS TO TRADE - INSURANCE
CLASS 11 CBSE B.St Project AIDS TO TRADE - INSURANCE
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
MARUTI SUZUKI- A Successful Joint Venture in India.pptx
MARUTI SUZUKI- A Successful Joint Venture in India.pptx
Unit 8 - Information and Communication Technology (Paper I).pdf
Unit 8 - Information and Communication Technology (Paper I).pdf
Home assignment II on Spectroscopy 2024 Answers.pdf
Home assignment II on Spectroscopy 2024 Answers.pdf
Elements in the same row have the same number of () levelsWhi.docx
- 1. Elements in the same row have the same number of (*) levels Which elements in B O U L A N would be in the same family? Which would have the same number of energy levels? Highest mass? Lowest mass? Which is more reactive? Uranium or Lithium Will elements B and U lose electrons in a chemical reactor? Will elements B and U form positive or negative ions? Thanks so much (: