Risk
•Download as PPT, PDF•
0 likes•119 views
This document defines key terms related to risk assessment including hazard, risk, accident, and provides a framework for calculating risk level based on probability, exposure, and consequence of an event. It also outlines strategies for controlling risks, including elimination, substitution, engineering controls, administrative controls, and use of personal protective equipment.
Report
Share
Report
Share
Recommended
EMPLOYEE PARTICIPATION IN SAFETY.pdf
The document discusses various ways to improve employee participation in safety practices in organizations. It outlines 10 ways for employees to participate, such as working safely and following rules, reporting unsafe situations, and supporting management's safety efforts. It also describes 10 systematic methods an organization can use, like including safety in job requirements, providing safety training, and conducting safety inspections. Additional topics covered include the purpose of safety competitions, committees, and circles to maintain employee interest and involvement in safety. The role of trade unions is also discussed, emphasizing their responsibility to support management's safety regulations and programs.
construction macheinery Safety.pdf
This document provides safety guidelines for working with various types of construction machinery. It outlines requirements for siting machinery safely, fencing dangerous parts, providing safe access, and conducting maintenance and inspections. Specific guidelines are provided for earth moving, lifting, and hoisting machinery. Drivers and signalers must be trained and competent. Machinery must be tested regularly and thoroughly inspected for defects before each shift to ensure safe operation.
INTRODUCTION TO SAFETY.pdf
This document provides an introduction to safety. It defines safety as eliminating hazards to protect health and control harm. Accidents are often predictable if hazards are identified and controlled. Knowledge and experience can prevent injuries if applied properly through methods like conducting safety audits and implementing continuous improvement plans. Management must prioritize safety equally with production to achieve the benefits of increased productivity and profitability that come from preventing accidents.
IS 14489 Q.doc
The document is a checklist for auditing general safety, health, and emergency preparedness at an industrial organization. It contains 195 questions across various categories including health and safety policy, safety organization structure, accident reporting, safety inspections, training, hazard identification, fire protection, emergency preparedness, and more. Many questions are marked with an asterisk to indicate they require a yes or no answer. The extensive checklist aims to evaluate all aspects of the organization's safety management system and emergency response capabilities.
Safety Audit as per IS 14489.ppt
This document outlines the process and methodology for conducting a safety audit. It discusses pre-audit activities like developing an audit plan and collecting background information. Key on-site audit activities involve understanding management systems, assessing strengths and weaknesses, collecting evidence through record reviews, observations and interviews. Post-audit activities include evaluating evidence and reporting findings. The goal is to objectively evaluate safety performance and compliance to help safeguard assets and improve safety.
Indian Electricity Act 1910.pdf
This document is the Indian Electricity Act of 1910. Some key points:
- It establishes the framework for licensing and regulating the supply of electricity across India.
- Licenses from the State Government are required for supplying electricity to the public or transmitting electricity between areas.
- It defines important terms like "consumer", "licensee", "electric supply line", and establishes rights and obligations of licensees and consumers.
- It covers issues like laying wires, breaking up streets, metering, charging for supply, discontinuing supply for non-payment, protection of infrastructure, and penalties for offenses.
Indian electricity IE RULES 1956.pdf
This document contains the Indian Electricity Rules from 1956 that were amended up to 2000. It regulates the generation, transmission, supply and use of electrical energy in India.
The rules are divided into multiple chapters that cover topics such as preliminary definitions, inspectors and their roles, licensing requirements for supply, general safety requirements, supply conditions, overhead lines specifications, electric traction, additional precautions for mines and oilfields, and miscellaneous items. It provides detailed regulations and technical standards to govern the electric power sector in India.
ACT&RULE West Bengal.ppt
The document summarizes key aspects of the Factories Act 1948 and West Bengal Factories Rules 1958. The objective of the acts is to regulate labor in factories and protect worker health and safety. A factory is defined as any premises with 10 or more power-driven workers or 20 or more non-power-driven workers. The acts establish rules around issues like health, safety, welfare, working hours, hazardous processes, and penalties for non-compliance. Duties of occupiers include ensuring worker health and safety, and workers have rights like safety training and representation regarding inadequate protections.
Recommended
EMPLOYEE PARTICIPATION IN SAFETY.pdf
The document discusses various ways to improve employee participation in safety practices in organizations. It outlines 10 ways for employees to participate, such as working safely and following rules, reporting unsafe situations, and supporting management's safety efforts. It also describes 10 systematic methods an organization can use, like including safety in job requirements, providing safety training, and conducting safety inspections. Additional topics covered include the purpose of safety competitions, committees, and circles to maintain employee interest and involvement in safety. The role of trade unions is also discussed, emphasizing their responsibility to support management's safety regulations and programs.
construction macheinery Safety.pdf
This document provides safety guidelines for working with various types of construction machinery. It outlines requirements for siting machinery safely, fencing dangerous parts, providing safe access, and conducting maintenance and inspections. Specific guidelines are provided for earth moving, lifting, and hoisting machinery. Drivers and signalers must be trained and competent. Machinery must be tested regularly and thoroughly inspected for defects before each shift to ensure safe operation.
INTRODUCTION TO SAFETY.pdf
This document provides an introduction to safety. It defines safety as eliminating hazards to protect health and control harm. Accidents are often predictable if hazards are identified and controlled. Knowledge and experience can prevent injuries if applied properly through methods like conducting safety audits and implementing continuous improvement plans. Management must prioritize safety equally with production to achieve the benefits of increased productivity and profitability that come from preventing accidents.
IS 14489 Q.doc
The document is a checklist for auditing general safety, health, and emergency preparedness at an industrial organization. It contains 195 questions across various categories including health and safety policy, safety organization structure, accident reporting, safety inspections, training, hazard identification, fire protection, emergency preparedness, and more. Many questions are marked with an asterisk to indicate they require a yes or no answer. The extensive checklist aims to evaluate all aspects of the organization's safety management system and emergency response capabilities.
Safety Audit as per IS 14489.ppt
This document outlines the process and methodology for conducting a safety audit. It discusses pre-audit activities like developing an audit plan and collecting background information. Key on-site audit activities involve understanding management systems, assessing strengths and weaknesses, collecting evidence through record reviews, observations and interviews. Post-audit activities include evaluating evidence and reporting findings. The goal is to objectively evaluate safety performance and compliance to help safeguard assets and improve safety.
Indian Electricity Act 1910.pdf
This document is the Indian Electricity Act of 1910. Some key points:
- It establishes the framework for licensing and regulating the supply of electricity across India.
- Licenses from the State Government are required for supplying electricity to the public or transmitting electricity between areas.
- It defines important terms like "consumer", "licensee", "electric supply line", and establishes rights and obligations of licensees and consumers.
- It covers issues like laying wires, breaking up streets, metering, charging for supply, discontinuing supply for non-payment, protection of infrastructure, and penalties for offenses.
Indian electricity IE RULES 1956.pdf
This document contains the Indian Electricity Rules from 1956 that were amended up to 2000. It regulates the generation, transmission, supply and use of electrical energy in India.
The rules are divided into multiple chapters that cover topics such as preliminary definitions, inspectors and their roles, licensing requirements for supply, general safety requirements, supply conditions, overhead lines specifications, electric traction, additional precautions for mines and oilfields, and miscellaneous items. It provides detailed regulations and technical standards to govern the electric power sector in India.
ACT&RULE West Bengal.ppt
The document summarizes key aspects of the Factories Act 1948 and West Bengal Factories Rules 1958. The objective of the acts is to regulate labor in factories and protect worker health and safety. A factory is defined as any premises with 10 or more power-driven workers or 20 or more non-power-driven workers. The acts establish rules around issues like health, safety, welfare, working hours, hazardous processes, and penalties for non-compliance. Duties of occupiers include ensuring worker health and safety, and workers have rights like safety training and representation regarding inadequate protections.
Factories -ACT & RULE.ppt
The document summarizes the Factories Act 1948 and Bihar Factories Rules 1950. It defines key terms like factory, worker, and manufacturing process. It outlines the objectives of regulating labor conditions, working hours, and ensuring workplace health and safety. It describes the duties of occupiers to guarantee workers' health, safety and welfare. Various chapters cover aspects like inspecting staff, health, safety, welfare, employment and penalties. Important sections specify requirements around machinery safety, dangerous substances, lighting, lifts and other facilities. The penalties for non-compliance are also specified.
Contractor's _obligation.ppt
This document outlines safety obligations for contractors and employers. It discusses:
1) The responsibilities of contractors which include providing a list of workers, ensuring safety training and certificates, obtaining permits, following safety practices, and reporting/treating any accidents.
2) The responsibilities of employers which include evaluating contractor safety performance, providing hazard information and training, maintaining injury logs, and ensuring contractors follow regulations.
3) Penalties for contractors who violate safety requirements, ranging from Rs. 1000 for the first violation to debarment for the third violation.
SAFETY COMMITTEE.pdf
The document discusses safety committees, which were recommended in 1931 to encourage safe work practices. Safety committees are comprised of management and worker representatives tasked with creating and maintaining a safe work environment. Their objectives include providing a discussion platform on safety, promoting safety consciousness, and facilitating communication between workers and management. Committees can be centralized, corporate-level, departmental, or special purpose depending on a company's structure. Effective committees regularly meet with agendas, document meetings, and work to resolve issues, while ineffective ones are disorganized and fail to implement recommendations.
LOTO Training.ppt
This document discusses lockout/tagout procedures for working on hazardous equipment. It covers who needs training in lockout/tagout, what hazardous energy is, the different types of lockout devices, tag requirements, and required lockout procedures. The procedures involve notifying affected employees, shutting down and isolating equipment, attaching lockout devices, releasing stored energy, and verifying isolation before starting maintenance. Examples of lockout devices include locks for electrical panels and plugs, blanks for pipes, and blocks for presses. Tags are only for information and don't provide the protection of lockout devices.
Check List for Crane Inspection.pdf
This document contains a checklist for inspecting an E.O.T. crane. The checklist is divided into 18 parameters to observe, including the cabin, long travel platform, limits, neutral interlock system, emergency door switch, crane trolley, crane landing platform, bus bar protection, lighting, collectors, walkways, railings, tracks, hooks, pulleys, and ropes. For each parameter, inspectors are to check various components and record any observations or remarks.
COST OF ACCIDENT.ppt
This document discusses the costs of workplace accidents. It notes that accidents result in direct costs like medical expenses, lost wages, and compensation, as well as indirect costs that are 5 times the direct costs, such as decreased productivity. Accidents cost more than their direct expenses alone due to ripple effects. The document advocates calculating total accident costs using a standard method to understand their full financial impact and take steps to reduce costs by preventing accidents.
Plant ; equipment dismantling of scaffold
This risk assessment record summarizes the potential hazards and control measures for dismantling a scaffold. It identifies 5 work activities: 1) isolating electrical power, 2) removing electrical installations, 3) starting dismantling from the top, 4) stacking materials at ground level, and 5) shifting scaffolding materials. For each activity, foreseeable risks are identified such as electrocution, falling, and ergonomic hazards. Control measures include proper supervision, permits, PPE use, signage, coordination meetings, and material handling training. Responsibilities are assigned for implementing controls to reduce risks during scaffold dismantling.
Safety in use of ladder
This document discusses ladder safety and fall protection. It describes different types of ladders, how ladders can be dangerous if used incorrectly or with defects, and safe practices for using ladders. Key safety tips include using the right ladder for the job, inspecting ladders for defects, setting ladders up at the proper angle, barricading work areas, and not overreaching while on a ladder. The document provides guidance on ladder ratings and weight limits according to ladder type.
Check list for conveyor belt inspection
This document contains two safety checklists for conveyor belts: one for when the belt is operating, and one for when the belt is shut down. The operating checklist includes 14 items related to safety features like emergency switches, guards, lighting, and personal protective equipment. The shut down checklist includes 8 items to check when the belt is off, such as obtaining a work permit, removing tools from the belt, and refitting guards before restarting.
Selection of safety appliances
This document discusses selecting and using personal protective equipment (PPE) to reduce safety risks at work. It emphasizes that PPE should be chosen based on known hazards, risks, and body parts exposed. Workers are expected to use required PPE properly, maintain safety appliances, and follow safety procedures to prevent accidents. The document also outlines workers' obligations to follow safety rules and their rights to safety information and training under Indian labor laws.
Safety education and training
The document discusses developing a safety education and training program. The key steps are:
1) Identifying the need for training by assessing differences between actual and desired safety performance. This involves discussions with management and employees.
2) Formulating the program aims and objectives, which can be either trainer-oriented or focused on changing learner behavior.
3) Detailing the course contents, which may include topics on management techniques, engineering approaches, and safe work practices.
4) Selecting an appropriate course method such as lectures, discussions, case studies, or demonstrations to suit the objectives and participant level. The goal is to improve safety knowledge, skills, and attitudes.
Use of PPEs
This document discusses personal protective equipment (PPE) and employer responsibilities for protecting employees from workplace hazards. It describes common types of PPE including equipment for hearing/sight, foot, respiratory, head, hand, and eye protection. Employers must assess hazards, implement engineering and administrative controls where possible, and provide appropriate PPE and training to employees on its proper use. Examples of specific PPE like hard hats, safety glasses, and gloves are provided for different types of hazards like chemicals, falling objects, sharp tools, and loud noises.
Safety while Working at Height
This document provides guidance on safe working at heights. It lists several precautions and safety measures that should be followed such as warning people below the work area, using safety belts and life-lines secured to structures, ensuring railings and toe guards are present, using ladders in a safe position, and prohibiting loose materials and parts from being left behind. Scaffolds should be tested to withstand 50% more load and certified. Workers should be trained and free of medical issues. Proper illumination is needed for night work and temporary supports should not be used to access heights.
Construction safety manual
This document provides health and safety guidelines for various construction activities including excavation, blasting, construction processes, and plant/machinery use. It discusses hazards associated with open excavations, tunneling, shaft excavation, coffer dams, demolition, transportation and storage of explosives, blasting procedures, and more. The document aims to ensure the safety of workers involved in these various operations at construction sites.
Road
Safety involves performing jobs and activities without harming oneself or others. Hazards are conditions with potential to cause injury or property loss. Road hazards include lack of helmet use, speeding, distracted driving, unsecured loads, and children or animals on roads. Vehicle defects, poor road conditions, and bad weather also pose risks. People sometimes do not take precautions due to overconfidence, ignorance of risks, peer pressure, or a desire to show off. Defensive driving requires concentration, knowledge, judgment, and following traffic rules. Standard accident prevention involves recognizing, understanding, and responding correctly to hazards. Parking, overtaking, and braking safely are important for road safety.
General safety for contractor workers
1. The document outlines general safety rules for contractors and their workers when working on site, including that safety is the responsibility of the contractor and their staff.
2. Contractors must ensure all workers are trained in safety procedures, certified medically fit, and issued height passes when working at heights.
3. Detailed safety procedures and protocols must be prepared and signed by the contractor and executing department before any work begins to ensure all safety precautions are followed.
Work permit system
The document discusses the purpose and procedures of a work permit system. It is intended to ensure that all work is carried out safely by defining responsibilities, requiring appropriate training, and providing safety equipment. A work permit specifies the conditions and safety procedures that must be followed for particular jobs. It is required for non-routine and hazardous routine work, and when third parties are involved. A work permit must be prepared with relevant parties and approved before work begins to ensure all hazards are addressed.
Safety clearance for contractor before start of job
Contractors must receive safety clearance from the Safety Engineering Department before starting work at a site. The safety officer will ensure the contractor understands the job and safety measures, that the work site is properly arranged, and that required personal protective equipment is available and its use understood. The officer may also record safety instructions to follow regarding barricades, permissions, safety briefings, tool inspections, and supervision. The Safety Department monitors contractors' work and ensures safety compliance, and in emergencies clearance may be given based on a letter of intent or department head request detailing the work.
Accident Investigation Process
This document contains a questionnaire for investigating workplace accidents. It asks about the circumstances leading up to the accident, losses incurred, safety procedures, the victim's training and experience, use of protective equipment, fitness for the job, compliance with procedures, supervision, machine conditions, guarding of moving parts, workspace area, environmental conditions, and housekeeping standards. The purpose is to gather information from various angles to understand what factors may have contributed to the accident.
Accident Investigation Process
This document outlines the procedure for investigating accidents and incidents at a factory or organization. It assigns responsibilities for collecting information about accidents, investigating the site and causes, determining remedial measures, and monitoring implementation. The procedure involves safety representatives obtaining initial information, investigating the site, interrogating those involved, analyzing causes such as safety violations or equipment defects, recommending solutions, and documenting the investigation in a report. Safety and line managers are jointly responsible for the process.
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
More Related Content
More from Bimal Chandra Das
Factories -ACT & RULE.ppt
The document summarizes the Factories Act 1948 and Bihar Factories Rules 1950. It defines key terms like factory, worker, and manufacturing process. It outlines the objectives of regulating labor conditions, working hours, and ensuring workplace health and safety. It describes the duties of occupiers to guarantee workers' health, safety and welfare. Various chapters cover aspects like inspecting staff, health, safety, welfare, employment and penalties. Important sections specify requirements around machinery safety, dangerous substances, lighting, lifts and other facilities. The penalties for non-compliance are also specified.
Contractor's _obligation.ppt
This document outlines safety obligations for contractors and employers. It discusses:
1) The responsibilities of contractors which include providing a list of workers, ensuring safety training and certificates, obtaining permits, following safety practices, and reporting/treating any accidents.
2) The responsibilities of employers which include evaluating contractor safety performance, providing hazard information and training, maintaining injury logs, and ensuring contractors follow regulations.
3) Penalties for contractors who violate safety requirements, ranging from Rs. 1000 for the first violation to debarment for the third violation.
SAFETY COMMITTEE.pdf
The document discusses safety committees, which were recommended in 1931 to encourage safe work practices. Safety committees are comprised of management and worker representatives tasked with creating and maintaining a safe work environment. Their objectives include providing a discussion platform on safety, promoting safety consciousness, and facilitating communication between workers and management. Committees can be centralized, corporate-level, departmental, or special purpose depending on a company's structure. Effective committees regularly meet with agendas, document meetings, and work to resolve issues, while ineffective ones are disorganized and fail to implement recommendations.
LOTO Training.ppt
This document discusses lockout/tagout procedures for working on hazardous equipment. It covers who needs training in lockout/tagout, what hazardous energy is, the different types of lockout devices, tag requirements, and required lockout procedures. The procedures involve notifying affected employees, shutting down and isolating equipment, attaching lockout devices, releasing stored energy, and verifying isolation before starting maintenance. Examples of lockout devices include locks for electrical panels and plugs, blanks for pipes, and blocks for presses. Tags are only for information and don't provide the protection of lockout devices.
Check List for Crane Inspection.pdf
This document contains a checklist for inspecting an E.O.T. crane. The checklist is divided into 18 parameters to observe, including the cabin, long travel platform, limits, neutral interlock system, emergency door switch, crane trolley, crane landing platform, bus bar protection, lighting, collectors, walkways, railings, tracks, hooks, pulleys, and ropes. For each parameter, inspectors are to check various components and record any observations or remarks.
COST OF ACCIDENT.ppt
This document discusses the costs of workplace accidents. It notes that accidents result in direct costs like medical expenses, lost wages, and compensation, as well as indirect costs that are 5 times the direct costs, such as decreased productivity. Accidents cost more than their direct expenses alone due to ripple effects. The document advocates calculating total accident costs using a standard method to understand their full financial impact and take steps to reduce costs by preventing accidents.
Plant ; equipment dismantling of scaffold
This risk assessment record summarizes the potential hazards and control measures for dismantling a scaffold. It identifies 5 work activities: 1) isolating electrical power, 2) removing electrical installations, 3) starting dismantling from the top, 4) stacking materials at ground level, and 5) shifting scaffolding materials. For each activity, foreseeable risks are identified such as electrocution, falling, and ergonomic hazards. Control measures include proper supervision, permits, PPE use, signage, coordination meetings, and material handling training. Responsibilities are assigned for implementing controls to reduce risks during scaffold dismantling.
Safety in use of ladder
This document discusses ladder safety and fall protection. It describes different types of ladders, how ladders can be dangerous if used incorrectly or with defects, and safe practices for using ladders. Key safety tips include using the right ladder for the job, inspecting ladders for defects, setting ladders up at the proper angle, barricading work areas, and not overreaching while on a ladder. The document provides guidance on ladder ratings and weight limits according to ladder type.
Check list for conveyor belt inspection
This document contains two safety checklists for conveyor belts: one for when the belt is operating, and one for when the belt is shut down. The operating checklist includes 14 items related to safety features like emergency switches, guards, lighting, and personal protective equipment. The shut down checklist includes 8 items to check when the belt is off, such as obtaining a work permit, removing tools from the belt, and refitting guards before restarting.
Selection of safety appliances
This document discusses selecting and using personal protective equipment (PPE) to reduce safety risks at work. It emphasizes that PPE should be chosen based on known hazards, risks, and body parts exposed. Workers are expected to use required PPE properly, maintain safety appliances, and follow safety procedures to prevent accidents. The document also outlines workers' obligations to follow safety rules and their rights to safety information and training under Indian labor laws.
Safety education and training
The document discusses developing a safety education and training program. The key steps are:
1) Identifying the need for training by assessing differences between actual and desired safety performance. This involves discussions with management and employees.
2) Formulating the program aims and objectives, which can be either trainer-oriented or focused on changing learner behavior.
3) Detailing the course contents, which may include topics on management techniques, engineering approaches, and safe work practices.
4) Selecting an appropriate course method such as lectures, discussions, case studies, or demonstrations to suit the objectives and participant level. The goal is to improve safety knowledge, skills, and attitudes.
Use of PPEs
This document discusses personal protective equipment (PPE) and employer responsibilities for protecting employees from workplace hazards. It describes common types of PPE including equipment for hearing/sight, foot, respiratory, head, hand, and eye protection. Employers must assess hazards, implement engineering and administrative controls where possible, and provide appropriate PPE and training to employees on its proper use. Examples of specific PPE like hard hats, safety glasses, and gloves are provided for different types of hazards like chemicals, falling objects, sharp tools, and loud noises.
Safety while Working at Height
This document provides guidance on safe working at heights. It lists several precautions and safety measures that should be followed such as warning people below the work area, using safety belts and life-lines secured to structures, ensuring railings and toe guards are present, using ladders in a safe position, and prohibiting loose materials and parts from being left behind. Scaffolds should be tested to withstand 50% more load and certified. Workers should be trained and free of medical issues. Proper illumination is needed for night work and temporary supports should not be used to access heights.
Construction safety manual
This document provides health and safety guidelines for various construction activities including excavation, blasting, construction processes, and plant/machinery use. It discusses hazards associated with open excavations, tunneling, shaft excavation, coffer dams, demolition, transportation and storage of explosives, blasting procedures, and more. The document aims to ensure the safety of workers involved in these various operations at construction sites.
Road
Safety involves performing jobs and activities without harming oneself or others. Hazards are conditions with potential to cause injury or property loss. Road hazards include lack of helmet use, speeding, distracted driving, unsecured loads, and children or animals on roads. Vehicle defects, poor road conditions, and bad weather also pose risks. People sometimes do not take precautions due to overconfidence, ignorance of risks, peer pressure, or a desire to show off. Defensive driving requires concentration, knowledge, judgment, and following traffic rules. Standard accident prevention involves recognizing, understanding, and responding correctly to hazards. Parking, overtaking, and braking safely are important for road safety.
General safety for contractor workers
1. The document outlines general safety rules for contractors and their workers when working on site, including that safety is the responsibility of the contractor and their staff.
2. Contractors must ensure all workers are trained in safety procedures, certified medically fit, and issued height passes when working at heights.
3. Detailed safety procedures and protocols must be prepared and signed by the contractor and executing department before any work begins to ensure all safety precautions are followed.
Work permit system
The document discusses the purpose and procedures of a work permit system. It is intended to ensure that all work is carried out safely by defining responsibilities, requiring appropriate training, and providing safety equipment. A work permit specifies the conditions and safety procedures that must be followed for particular jobs. It is required for non-routine and hazardous routine work, and when third parties are involved. A work permit must be prepared with relevant parties and approved before work begins to ensure all hazards are addressed.
Safety clearance for contractor before start of job
Contractors must receive safety clearance from the Safety Engineering Department before starting work at a site. The safety officer will ensure the contractor understands the job and safety measures, that the work site is properly arranged, and that required personal protective equipment is available and its use understood. The officer may also record safety instructions to follow regarding barricades, permissions, safety briefings, tool inspections, and supervision. The Safety Department monitors contractors' work and ensures safety compliance, and in emergencies clearance may be given based on a letter of intent or department head request detailing the work.
Accident Investigation Process
This document contains a questionnaire for investigating workplace accidents. It asks about the circumstances leading up to the accident, losses incurred, safety procedures, the victim's training and experience, use of protective equipment, fitness for the job, compliance with procedures, supervision, machine conditions, guarding of moving parts, workspace area, environmental conditions, and housekeeping standards. The purpose is to gather information from various angles to understand what factors may have contributed to the accident.
Accident Investigation Process
This document outlines the procedure for investigating accidents and incidents at a factory or organization. It assigns responsibilities for collecting information about accidents, investigating the site and causes, determining remedial measures, and monitoring implementation. The procedure involves safety representatives obtaining initial information, investigating the site, interrogating those involved, analyzing causes such as safety violations or equipment defects, recommending solutions, and documenting the investigation in a report. Safety and line managers are jointly responsible for the process.
More from Bimal Chandra Das (20)
Safety clearance for contractor before start of job
Safety clearance for contractor before start of job
Recently uploaded
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama UniversityAkanksha trivedi rama nursing college kanpur.
Natural birth techniques are various type such as/ water birth , alexender method, hypnosis, bradley method, lamaze method etcMain Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS Template 2023-2024 by: Irene S. Rueco
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
Recently uploaded (20)
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
Risk
- 1. BIRD’S TRIANGLE Serious accident Minor injuries Near miss Unsafe Acts / Conditions ? ? ? 1 10 30 600 Property Damage E F F E C T C A U S E
- 2. HAZARD : Anything capable of producing adverse effect on health & safety of humans DEFINITIONS
- 3. RISK : The probability of an event occurring and the consequence if it does DEFINITIONS
- 4. ACCIDENT : A sequence of events resulting in injury / illness/property damage or with potential to do so DEFINITIONS
- 5. Risk = Probability x Exposure x Consequence RISK ASSESSMENT Probability Exposure Occurrence Consequence RISK
- 6. Risk Score Calculation Probability Exposure Consequence Almost Certain 10 Continuous 10 Numerous fatality 100 Quite possible 6 Frequent 6 Multiple fatality 50 Unusual/possible 3 Occasional 3 Fatality 25 Remotely possible 1 Infrequent 2 Serious injury 15 Very unlikely 0.5 Rare 1 Reportable 5 Pract. impossible 0.1 Very rare 0.5 1st Aid 1 7 Very High > 400 Risk Level High 200 - 400 Substantial 60 - 200 R = P x E x C Moderate 15 - 60 Low < 15
- 7. HAZARD CONTROL 1 Elimination By design or replacement 2 Substitution With less hazardous material 3 Minimisation Of raw material, intermediates, wastes, finished product, spares 4 Engg. Control To reduce exposure by guarding, mech. handling, ventilation etc. (At source) Automation, remote control, parallel, redundant system, over design etc. 5 Admn. Control SWP, H.keeping, Trg, Supv, W.Permit, Maint. Sch,edule. 6 Using PPEs (Personal Protective Equipment)
- 8. RISK CONTROL RISK CONTROL 1 Avoidance Remove the risk altogether 2 Loss Prevention Reduce losses though •Loss Control Programs •Safe Work Practices •Disciplines / Rules •Preventive Maint. 3 Segregation High risk areas to be located apart 4 Risk Transfer By Leasing / Contracting