Rime of The Ancient Mariner Part III
•Download as PPTX, PDF•
4 likes•2,948 views
The document provides context and summaries of key passages from Samuel Taylor Coleridge's poem "The Rime of the Ancient Mariner." It introduces the poem as Coleridge's longest work, published in 1798. A summary is then provided of the opening sections where the Mariner stops a wedding guest and tells his story of sailing south where they encounter a storm. The ship becomes trapped in ice until an albatross appears and leads them out of the ice, but the Mariner kills it with his crossbow. The crew then suffers from lack of wind and water, and strange apparitions begin to appear on the ship.
Recommended
More Related Content
What's hot
What's hot (20)
Viewers also liked
Viewers also liked (20)
Similar to Rime of The Ancient Mariner Part III
Similar to Rime of The Ancient Mariner Part III (20)
Recently uploaded
Recently uploaded (20)
Rime of The Ancient Mariner Part III
- 2. ABOUT THE AUTHOR Samuel Taylor Coleridge (21 October 1772 – 25 July 1834) was an English poet, literary critic and philosopher who, with his friend William Wordsworth, was a founder of the Romantic Movement in England and a member of the Lake Poets. He wrote the poems The Rime of the Ancient Mariner and Kubla Khan, as well as the major prose work Biographia Literaria. His critical work, especially on Shakespeare, was highly influential, and he helped introduce German idealist philosophy to English-speaking culture. He coined many familiar words and phrases, including the celebrated suspension of disbelief. He was a major influence on Emerson, and American transcendentalism.
- 3. POEM AND THE POET The rime of the ancient mariner (originally the rime of the ancient mariner) is the longest major poem by the English poet Samuel Taylor Coleridge, written in 1797–98 and published in 1798 in the first edition of lyrical ballads. Modern editions use a revised version printed in 1817 that featured a gloss. Along with other poems in lyrical ballads, it was a signal shift to modern poetry and the beginning of British Romantic literature.
- 4. A BRIEF INTRODUCTION • The Mariner stops a wedding guest and forces him, spellbound, to listen to his story. • The ship sails south to equator. • Wedding guest hears music of wedding beginning. • A storm hits the ship and impels it south. They are stuck in ice. • An albatross appears and is befriended by the shipmates. A south wind springs up and takes them northward. • He kills it with his crossbow. • The crew at first cry out against him, but then commend him when the fog clears off. • They sail north and become becalmed at the equator. They suffer from thirst. Slimy things are on the surface, and lights are on the water and masts at night. • A spirit follows them under the ship nine fathoms down. • They hang the bird around his neck.
- 6. PARAPHRASE • The speaker finally realizes what • They have spent a long time drifting on the ocean with no it is, and he wants to shout, but wind or water, and everyone is his mouth is too dry. His lips are sick of it. Then one day, the sunburned and caked with dried mariner sees something coming blood. Fortunately, he has a from the west; as in, the opposite direction as the solution. He bites his arm to wet mariner's sweet home England. his lips with his own blood, just He can't decide whether the enough so that he can shout. He thing is a small "speck" or a shouts that he sees a sail. His more spread-out "mist." The shape starts to come into focus crewmates are so happy that and he became aware ("wist") of they shout "gramercy!" what looked like. It moves meaning, "Thank heavens!"The around in zigzag fashion as if ship is coming their way. Maybe escaping supernatural forces. Hey, join the club. their crew will have water.
- 7. … • The western wave was all a-flame. The day was well nigh done! Almost upon the western wave Rested the broad bright Sun; When that strange shape drove suddenly Betwixt us and the Sun. And straight the Sun was flecked with bars, (Heaven's Mother send us grace!) As if through a dungeon-grate he peered With broad and burning face. Alas! (thought I, and my heart beat loud) How fast she nears and nears! Are those her sails that glance in the Sun, Like restless gossamers? • Are those her ribs through which the Sun Did peer, as through a grate? And is that Woman all her crew? Is that a DEATH? and are there two? Is DEATH that woman's mate? Her lips were red, her looks were free, Her locks were yellow as gold: Her skin was as white as leprosy, The Night-mare LIFE-IN-DEATH was she, Who thick man's blood with cold. The naked hulk alongside came, And the twain were casting dice; 'The game is done! I've won! I've won!' Quoth she, and whistles thrice.
- 8. PARAPHRASE • The sun is setting in the west, and the ship is approaching from the west. Here Coleridge provides a complicated image to illustrate how the ship is really – get ready for it – a Ghost Ship! Here's the image: the mysterious ship sails in front of the setting sun, and rather than blocking out part of the sun completely, it just looks like the sun has bars in front of it. In other words, the ship looks like a skeleton. The ship's sails aren't normal sails –you know, the kind that can hold wind. Instead, they look like tattered spider webs, or "gossamers." • Its hull looks like ribs. Worst of all, he can now see that the crew consists of only two people: Death and Life-in-Death. Well, shoot. We imagine death as the hooded guy with the sickle, or something like that, while Life-inDeath is a woman who appears relatively normal except for her pale, diseased-looking skin.
- 9. … • The Sun's rim dips; the stars rush out; At one stride comes the dark; With far-heard whisper, o'er the sea, Off shot the spectre-bark. We listened and looked sideways up! Fear at my heart, as at a cup, My life-blood seemed to sip!The stars were dim, and thick the night,The steersman's face by his lamp gleamed white; From the sails the dew did drip—Till clomb above the eastern bar The hornèd Moon, with one bright star. Within the nether tip. • One after one, by the stardogged Moon, Too quick for groan or sigh, Each turned his face with a ghastly pang, and cursed me with his eye. Four times fifty living men,(And I heard nor sigh nor groan)With heavy thump, a lifeless lump, They dropped down one by one. The souls did from their bodies fly,—They fled to bliss or woe! And every soul, it passed me by, Like the whizz of my cross-bow!
- 10. When the ship approaches, Death and Life-in-Death are playing a game. They are playing dice to decide who will gain the upper hand. We have the feeling that the fate of the Mariner and his friends rests on this dice game. We have a winner: Life-in-Death! She's just won power over a bunch of raggedy, thirsty sailors. She's probably wishing she had gone on The Price is Right instead – that dinette set is looking pretty good right about now. But nothing happens…yet. Night falls, and the mysterious Ghost Ship ("spectre bark") sails away. Everyone is waiting to see what will happen. Coleridge plays the scene like a suspense movie, complete with dew going drip-drip from the sails. The partial moon rises, and it looks like a "horn," or, if you prefer, a smiley face. One of the "horns" of the moon has a star next to it. This seems to be a bad sign, for some reason. Suddenly, everyone on the ship begins to die. They don't make a fuss but kind of just slump over. However, they do make sure to curse the Mariner with their eyes before they go. There are 200 men on the boat besides the Mariner, and they all die. Their souls escape their dead bodies and shoot past the Mariner like the crossbow with which he shot the Albatross.
- 11. “The Rime of the Ancient Mariner” is unique among Coleridge’s important works— unique in its intentionally archaic language, its length, its bizarre moral narrative, its strange scholarly notes printed in small type in the margins, its thematic ambiguity, and the long Latin epigraph that begins it, concerning the multitude of unclassifiable “invisible creatures” that inhabit the world. Its peculiarities make it quite atypical of its era; it has little in common with other Romantic works. Rather, the scholarly notes, the epigraph, and the archaic language combine to produce the impression (intended by Coleridge, no doubt) that the “Rime” is a ballad of ancient times (like “Sir Patrick Spence,” which appears in “Dejection: An Ode”), reprinted with explanatory notes for a new audience. Thank you.
Editor's Notes
- Faded picture background with full-color overlay(Intermediate)Tip: For best results with the picture overlay on this slide, use a picture that is the same dimensions as the slide: 7.5” high and 10” wide. If the picture is not the same height and width, resize or crop to those dimensions before following the instructions below. To reproduce the background effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank. Right-click the slide and then click FormatBackground.In the Format Background dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. In the Insert Picture dialog box, select a picture, and then click Insert.Also in the Format Background dialog box, in the Fill pane, in the Transparency box, enter 50%.Also in the Format Background dialog box, click Picture in the left pane. In the Picture pane, click the button next to Recolor, and then under Light Variations, click Background color 2 Light (first option from the left). On the Insert tab, in the Illustrations group, click Picture.In the Insert Picture dialog box, select the same picture chosen for the background, and then click Insert. Select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, under Crop from,enter 8.27” into the Right box to crop the picture to a width of 2.25”. On the Home tab, in the Drawing group, click Shape Effects, point to Soft Edges, and then click 10 point.
- Round bullet pattern(Basic)To reproduce the background effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank. On the Design tab, in the Background group, click BackgroundStyles, and then click Style 8 (second row, fourth option from the left).(Note: If this action is taken in a PowerPoint presentation containing more than one slide, the background style will be applied to all of the slides.) On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw a text box that spans the entire width of the slide.On the Insert tab, in the Text group, click Symbol. In the Symbol dialog box, do the following:In the Font list, select (normal text).In the Subset list, select General Punctuation.In the Character Code box, enter 2022 to select Bullet, and then click Insert.Click Insert 27 more times until there is a row of 28 bullets in the text box. Select the row of bullets. On the Home tab, in the Clipboard group, click Copy. In the text box, click to the right of the line of text and press ENTER to begin a new line of text. On the Home tab, in the Clipboard group, click the button above Paste. Repeat this process to create seven total rows of bullets within the text box. Select the text box. On the Home tab, in the Font group, select Calibrifrom the Font list, and then enter 50 in the Font Size box.On the Home tab, in the Paragraph group, click Center to center the text in the text box.Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Transform, and then under Warp, click Curve Down (fourth row, second option from the left). On the slide, drag the text box to position the seven rows of bullets on the slide.On the text box, drag the pink diamond adjustment handle to adjust the amount of warp on the rows of bullets.Under Drawing Tools, on the Format tab, in the WordArt Styles group, click the arrow next to Text Fill, point to Gradient Fill, and then click More Gradients. In the Format Text Effects dialog box, click Text Fill in the left pane. In the TextFill pane, select Gradient fill, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Right (first row, fourth option from the left).In the Angle box, enter 180°.Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Background 1, Lighter 35% (third row, first option from the left).In the Transparency box, enter 70%.Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Background 1 (first row, first option from the left).In the Transparency box, enter 75%.
- Transparent light effect(Basic)To reproduce one of the shapes on this slide, do the following:On the Home tab, in the Slides group, click Layout and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes click Oval (first row, second option from the left). Press and hold SHIFT to constrain the shape to a circle, and then drag to draw a circle on the slide. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.Click the button next to Direction, and then click From Center (thirdoption from the left).Under Gradient stops, click Add or Remove until three stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 60%(third row, fourth option from the left).In the Transparency box, enter 80%.Select Stop 2 from the list, and then do the following: In the Stop position box, enter 50%.Click the button next to Color, and then under Dark Blue, Text 2, Lighter 40%(fourth row, fourth option from the left).In the Transparency box, enter 70%.Select Stop 3 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). In the Transparency box, enter 100%.On the Home tab, in the Drawing group, click Shape Effects, point to Soft Edges, and then click 10 Point. To reproduce the other shapeson this slide, do the following:Select the circle on the slide. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Repeat this process to create a total of 10 circles. On the slide, drag the circles to position them at random intervals. For each circle, press and hold SHIFT and then drag the adjustment handles to resize as needed.To reproduce the different color and transparency effects in each of the shapes, do the following:Select the shape. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, click Fill in the left pane, and then select Gradient fill in the Fill pane. Under Gradient stops, click Add or Remove until three stops appear in the drop-down list, and then do the following:For the first and third (small circle below larger circle) circles from the left:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 60%(third row, fourth option from the left).In the Transparency box, enter 90%.Select Stop 2 from the list, and then do the following: In the Stop position box, enter 50%.Click the button next to Color, and then under Dark Blue, Text 2, Lighter 40%(fourth row, fourth option from the left).In the Transparency box, enter 85%.Select Stop 3 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). In the Transparency box, enter 100%.For the second circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the fourth circle from the left (large circle above third circle):Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 60%(third row, fourth option from the left).In the Transparency box, enter 80%.Select Stop 2 from the list, and then do the following: In the Stop position box, enter 50%.Click the button next to Color, and then under Dark Blue, Text 2, Lighter 40%(fourth row, fourth option from the left).In the Transparency box, enter 70%.Select Stop 3 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 60% (third row, fourth option from the left). In the Transparency box, enter 100%.For the fifth circle from the left:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 40%(fourth row, fourth option from the left).In the Transparency box, enter 88%.Select Stop 2 from the list, and then do the following: In the Stop position box, enter 50%.Click the button next to Color, and then under Dark Blue, Text 2, Lighter 40%(fourth row, fourth option from the left).In the Transparency box, enter 71%.Select Stop 3 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). In the Transparency box, enter 100%.For the sixth circle from the left:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 227, Green: 209, Blue: 143.In the Transparency box, enter 84%.Select Stop 2 from the list, and then do the following: In the Stop position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 223, Green: 205, Blue: 75.In the Transparency box, enter 85%.Select Stop 3 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 214, Green: 195, Blue: 84.In the Transparency box, enter 100%.For the seventh circle from the left:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 60%(third row, fourth option from the left).In the Transparency box, enter 60%.Select Stop 2 from the list, and then do the following: In the Stop position box, enter 50%.Click the button next to Color, and then under Dark Blue, Text 2, Lighter 40%(fourth row, fourth option from the left).In the Transparency box, enter 60%.Select Stop 3 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). In the Transparency box, enter 100%.For the eighth circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the ninth circle from the left (small brown circle below larger blue circle):Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 227, Green: 209, Blue: 143.In the Transparency box, enter 70%.Select Stop 2 from the list, and then do the following: In the Stop position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 223, Green: 205, Blue: 75.In the Transparency box, enter 85%.Select Stop 3 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 214, Green: 195, Blue: 84.In the Transparency box, enter 100%.For the tenth circle from the left (large blue circle above ninth circle):Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 60%(third row, fourth option from the left).In the Transparency box, enter 80%.Select Stop 2 from the list, and then do the following: In the Stop position box, enter 50%.Click the button next to Color, and then under Dark Blue, Text 2, Lighter 40%(fourth row, fourth option from the left).In the Transparency box, enter 74%.Select Stop 3 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). In the Transparency box, enter 100%.To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.Click the button next to Direction, and then click From Center (third option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 65, Green: 68, Blue: 97.Select Stop 2 from the list, and then do the following: In the Stop position box, enter 99%.Click the button next to Color, and then click Black, Text 1(first row, second option from the left).
- Half-circle picture with accent arcs(Basic)To reproduce the shape effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc.Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 7.5”.In the Shape Width box, enter 7.5”.Drag the yellow diamond adjustment handle on the right side of the arc to the bottom of the slide to create a half-circle. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Pictureor texture fill, and then do the following under Insert from: Click File. In the Insert Picture dialog box, select a picture, and then click Insert. Select Tile picture as texture. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select No line. Also in the Format Shape dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets, under Inner click Inside Diagonal Top Right (first row, third option from the left), and then do the following:In the Transparency box, enter 70%.In the Blur box, enter 20 pt.In the Distance box, enter 20 pt. Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 6.79”.In the Shape Width box, enter 10.03”.On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane. In the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following:Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).In the Transparency box, enter 50%.Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt.Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle.Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 6.86”.In the ShapeWidth box, enter 9.98”.On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Type list, select Linear.Click the button next to Direction, and then click Linear Down (first row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40%(fourth row, fifth option from the left).In the Transparency box, enter 77%.Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222.In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%.Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Left. Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left). In the Angle box, enter 270⁰.Under Gradient stops, click Add or Remove until four stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197.Select Stop 2 from the list, and then do the following: In the Stop position box, enter 30%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).Select Stop 3 from the list, and then do the following: In the Stop position box, enter 70%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).Select Stop 4 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197.
- Lace background(Basic)To reproduce the shape effects on this slide, do the following:On the Home tab, in the Slides group, click Layout and then click Blank. On the Insert tab, in the Illustrations group, click Clip Art. In the Clip Art pane, in the Search for box, enterj0437868. In the Search in list, select Everywhere. Select the clip art file to insert it into the slide. (Note: If you choose another clip art file, the clip art must be in the Windows Metafile format [.wmf].) On the slide, select the clip art.On the Home tab, in the Drawing group, click Arrange, and then click Ungroup. In the Microsoft Office PowerPoint dialog box, click Yes. On the slide, select the converted clip art. On the Home tab, in the Editing group, click Select, and then click Selection Pane. In the Selection and Visibility pane, select the top-level group. On the Home tab, in the Drawing group, click Arrange, and then click Ungroup. Also in the Selection and Visibility pane, select the Autoshape object, and then press DELETE. On the Home tab, in the Editing group, click Select, and then click Select All. On the Home tab, in the Drawing group, click Arrange, and then click Regroup. On the slide, drag the adjustment handles on the group to increase its size so that it extends beyond the edges of the slide. Select the group. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box , click Fill in the left pane, select Solid fill in the Fill pane, and then do the following:Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Transparency box, enter 80%.Also in the Format Shape dialog box , click LineColor in the left pane, select Gradient line in the Line Color pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Down (first row, second option from the left).In the Angle box, enter 90%.Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1(first row, first option from the left).In the Transparency box, enter 100%.Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click White, Background 1(first row, first option from the left).In the Transparency box, enter 0%.To reproduce the background on this slide, do the following: On the Design tab, in the bottom right corner of the Background group, click the Format Background dialog box launcher. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Diagonal (first row, first option from the left). In the Angle box, enter 225⁰.Under Gradient stops, click Add or Remove until three stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Tan, Background 2, Darker 10% (second row, third option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 18%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).Select Stop 3 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 209, Green: 211, Blue: 191.
- Picture with multicolored tint(Basic)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank. On the Insert tab, in the Illustrations group, click Picture. In the Insert Picture dialog box, select a picture, and then click Insert. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 4.08” and the Width box is set to 10”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes. Select the picture. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Picture in the left pane, and then do the following in the Picture pane:Click the button next to Recolor, and then under Color Modes, click Grayscale (first option from the left).In the Brightness box, enter 25%.In the Contrast box, enter 25%.Also in the Format Shape dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets, and then under Inner click Inside Top (first row, second option from the left). On the Home tab, in the Drawing group, click Shapes, and then under Rectangles, click Rectangle (first option from the left). Drag to draw a rectangle on the slide. Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 4.08”.In the Shape Width box, enter 10”.On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:Click the button next to Preset colors, and then click Rainbow II (fourth row, second option from the left).In the Type list, select Linear. Click the button next to Direction, and then click Linear Left (first row, fifth option from the left).In the Angle box, enter 180°.Under Gradient stops, in the drop-down list, select each of the five stops individually, and then in the Transparency box, enter 70%. Also in the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Press and hold SHIFT and select both the picture and the rectangle. On the Home tab, in the Drawing group, click Arrange, and then do the following:Point to Align, and then click Align to Slide. Point to Align, and then click Align Middle.Point to Align, and then click Align Center.Click Group.Drag the group vertically on the slide to position as needed. If the group is no longer centered horizontally on the slide, on the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide. Click Align Center. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Right (first row, fourth option from the left). In the Angle text box, enter 0⁰.Under Gradient stops, click Add or Remove until three stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, then under Theme Colors click White, Background 1, Darker 15% (third row, first option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 20%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).Select Stop 3 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click White, Background1, Darker 25% (fourth row, first option from the left).
- Recolored picture background with transparent overlay(Intermediate)To reproduce the background effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank. Right-click the slide and then click FormatBackground.In the Format Background dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. In the Insert Picture dialog box, select a picture, and then click Insert.Also in the Format Background dialog box, click Picture in the left pane. In the Picture pane, click the button next to Recolor, and then under Dark Variations, click Accent color 3 Dark (fourth option from the left). On the Home tab, in the Drawing group, click Shapes, and then under Rectangles, click Rectangle (first option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 7.5”.In the Shape Width box, enter 10”.On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then click No Outline.On the Home tab, in the Drawing group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Gradient fill, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Down (first row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 5% (sixth row, second option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 5%(sixth row, second option from the left).In the Transparency box, enter 100%.