This curriculum vitae is for Praveen Patil, seeking a career in innovative technologies where he can contribute significantly to organizational goals and objectives through constant learning. He has over 5 years of experience in new product development, engineering, and quality management for consumer electronics and industrial products. Some of his responsibilities have included concept design, prototype building, manufacturing process design, and ensuring compliance with quality standards. He is proficient with design tools like Creo, Pro/E, Catia V5, and Autocad. Currently he works as a lead engineer at HCL Technologies where he has led projects involving the design and development of various modules.
Managing Your Hardware Project, Something You should Know: From Concept, Desi...futurewardcentral
Join us for an informative talk about hardware development and stay for early happy hour with delicious craft beer and New York style pizza!
This week's speaker is Dennis You, co-founder of METRO PRODUCTS (http://www.tw-mpi.com/). Dennis has over 30-years of experience in industrial design, product management, prototyping, and plastic tooling & injection. His company, Metro, has successfully focused on offering makers and startups a hardware & software integrated solution with end-to-end support from design to shipping.
In his talk, Dennis will share a general overview of what hardware startups must know before launching their projects or crowdfunding campaigns. By taking advantages of these key insights, you will be better equiped to manage challenging projects. Though hardware is difficult, there are guidelines that you can follow to ensure that your projects won't fall behind schedule.
Managing Your Hardware Project, Something You should Know: From Concept, Desi...futurewardcentral
Join us for an informative talk about hardware development and stay for early happy hour with delicious craft beer and New York style pizza!
This week's speaker is Dennis You, co-founder of METRO PRODUCTS (http://www.tw-mpi.com/). Dennis has over 30-years of experience in industrial design, product management, prototyping, and plastic tooling & injection. His company, Metro, has successfully focused on offering makers and startups a hardware & software integrated solution with end-to-end support from design to shipping.
In his talk, Dennis will share a general overview of what hardware startups must know before launching their projects or crowdfunding campaigns. By taking advantages of these key insights, you will be better equiped to manage challenging projects. Though hardware is difficult, there are guidelines that you can follow to ensure that your projects won't fall behind schedule.
Research and develop ideas and processes for new products, improve the performance and design of existing products and overseeing production and packaging of final products.
Hands on experience in Research and New Product Development,Proficient Designing with solid works, Siemens nx,Catia,creo,Auto cad, Analysis,Mathematical modeling And FEA tool,Matlab.
Completed Research in optimization of Heat-Transfer in cold storage . Evaporative condenser Heat rejection,Individual Quick Freezer Optimization,Commercial Cooling Unit.
Experience:
• Experience in Product Design & Development, Analysis and Documentation Technology.
SUMMARY OF EXPERIENCE:
• 4+ years of Experience in New Product Design & Development, Analysis & Documentation.
• Experience in Design, Development and Modification of Plastics, Castings, Machined, Sheet metal (parts & Assemblies).
• Matching and Problem solving skills during manufacturing activities.
• Mechanical Engineering functions and Numerical Calculations.
• Knowledge of various ESS, ET & Q.A tests (Shock & Vibration, Acceleration Test Rain-Shower, EMI & EMC, Salt & Corrosion Tests, according to JSS-55555 standards).
• UNIGRAPHICS (NX) : Part Modelling (castings), Sheet metal, Plastic Design, Assembly,
Detailing & Drafting & Rendering.
• SOLIDWORKS: Part modelling (castings), Sheet metal, Plastic Design, Assembly, Detailing & Drafting & Rendering.
• SIMULATION: Static Analysis by using Simulation Premium.
• GD & T: Knowledge of GD&T using (ASME Standards Y14.5).
• AUTO CAD: 2D Drafting, Detailing & Dimensioning as per GD&T using (ASME Standards Y14.5).
• DFRM: Knowledge of Design for Reliability & Maintainability.
• DFA, DFM & DFMEA: Knowledge of Design for Assembly, Design for Manufacturability & Design for failure mode and effective analysis.
• STEALTH DESIGN: Good Knowledge of stealth Design Concepts.
• SAP (PLM): Creating Material Master, Creating & Uploading of Drawing, Creating BOM, Releasing Engineering Drawings, Creating ECR etc.
• SIX SIGMA: Basic Knowledge of Six sigma principles.
• ROHS: Restriction of Hazardous Substances Compliance.
• RENDERING & ANIMATION: Rendering of Products by using Photo view360 & Key shot tools.
• Reverse engineering.
• Tolerance stack up analysis.
• Frequent interaction with clients & vendors.
• Product Data Management Activities
• Customer Interaction.
• Estimation, Planning Documents, Deliveries.
1. CURRICULAM-VITAE
PRAVEEN PATIL Email:praveen.ptl@gmail.com, Mobile: +91 8861366644
OBJECTIVE:
Seeking a career in esteemed organization,this provides me with ample opportunities and challenges in the field
of innovative technologies.To Contribute Significantlyto the overall organization's goals and objectives to prove
myselfas individual capabilities, develop myknowledge,skills through constantlearning.To be a part of a team
that dynamicallyworks towards the growth of the organization.
Experience summary:
A resultoriented professional with around 5+ years of proven success in New ProductDevelopment&
Engineering (Electronic-Mechanical),PLM, and Quality Managementon Consumer electronic and
Industrial Products.
Experience in conceptdesign,development,prototype building and Verification of Consumer electronic
products.
Adept in managing operations involving resource planning,materials planning,in-process inspection,team
building and co-ordination with internal departments & external customers.
In-depth and hands-on experience in manufacturing process design & developmentand ensuring
compliance with qualitystandards.
CAD modeling and manufacturing drawing creation considering DFA and DFM.
Experience in re-engineering and design optimization for cost reduction.
Exposure to MIL-STD for design & developmentofConsoles considering ergonomics design,rugged &
commercial chassis & 19”Racks.
Developing the Design to meet EnvironmentTestSpecification as per standard JSS55555,EMI/EMC AND
Vibration.
Hands on experience in Class A Surface modelling.
Experience in productenhancementprojects and value engineering projects.
Experience in handling full productdevelopmentprojects from Conceptto Manufacturing.
Experience in reverse engineering concept.
Knowledge ofPreparing System requirementspecifications,High level design document.
Experience in Verifying the Hardware/Electronic board design EMN/EMP with the mechanical design for
interference and fitment.
Experience in Stack up/statistical tolerance analysis to analyse various assemblies to mitigate production
variation
Experience in Medical Quality Management System and ISO 13485 standards and documentations
Hands on Experience in GD & T and Tolerance analysis.
Experience in Developmentof Jigs and fixtures for medical and Defense(For assemblyand Individual
PCB’s) for testing the Vibration & reliabilityof new products.
Exposed to Project Managementand Estimation using MS Project.
Good Interpersonal and Project managementskills.
Education
M-Tech in Machine Design from BIET, Davangere in 2010 (71.2%).
B.E. in Mechanical Engineering from NMAMIT, Nitte in 2008 (65.4%) from VTU Belgaum.
SSLC in 2002 (82.5%).
Expertise in Tools & Technology
Microsoft Office 2010 tools: Word, Excel, Presentation and Publisher.
Design Tools:Creo,Pro/E Wildfire, Catia V5, Autocad and Tolerance Stack up.
PDM and PLM tools:Wind-chill and Agile Engineering Collaboration.
2. Profile
HCL Technologies PVT LTD JULY’ 2013 – PRESENT
Designation: - Lead Engineer
PROJECTS
Project : DESIGN AND DEVELOPMENT OF REDVOLT EXPANDER (NPD)
Role : Team Lead
Client : RED DIGITAL CINEMA
Responsibilities:
o Create design specification.
o Concept generation.
o Creation of Proof of concept using 3D printing.
o Material selection.
o Creation of 3D Cad model,2D manufacturing drawings for machined version ofthe module and Bill
of material.
o Creation of PCB layout models, Rigid flex models, Routing cables & creating cable drawings.
o EMN-EMP verification of all the boards.
o Prototype creation and Verification.
o Creation of 3D Cad model,2D manufacturing drawings for tooling version of the module and Bill of
material.
o Risk management activities, creation of DFMA.
o Track the status of the project and taking care of all the deliveries on time as per schedule.
o Creation of assembly instruction documents.
Project : DESIGN AND DEVELOPMENT OF PORT EXPANDER (NPD)
Role : Team Lead
Client : RED DIGITAL CINEMA
Responsibilities:
o Create design specification.
o Concept generation
o Creation of Proof of concept using 3D printing.
o Material selection.
o Creation of 3D Cad model,2D manufacturing drawings for machined version ofthe module and Bill
of material.
o Creation of PCB layout models, Rigid flex models, Routing cables & creating cable drawings.
o EMN-EMP verification of all the boards.
o Prototype creation and Verification.
o Creation of 3D Cad model,2D manufacturing drawings for tooling version of the module and Bill of
material.
o Risk management activities, creation of DFMA.
o Track the status of the project and taking care of all the deliveries on time as per schedule.
o Creation of assembly instruction documents.
3. Project: : Design and development of 4K Broadcast Module (NPD)
Role : Team Lead
Client : RED DIGITAL CINEMA
Responsibilities:
o Create design specification.
o Concept generation.
o Creation of Proof of concept using 3D printing.
o Design and Development of 4K module as per concept given.
o Material selection.
o Creation of 3D Cad model,2D manufacturing drawings for machined version ofthe module and Bill
of material.
o Prototype creation and Verification.
o Creation of 3D Cad model,2D manufacturing drawings for tooling version of the module and Bill of
material.
o Risk management activities, creation of DFMA.
o Track the status of the project and taking care of all the deliveries on time as per schedule.
o Creation of assembly instruction documents.
AAYUR TECHNOLOGY SOLUTIONS PVT LTD, and
ENGINIUM DESIGNS PVT LTD, Bangalore. April2011- July2013
Project: : Ruggedisationof High Altitude Generator
Role : Lead Engineer (Mechanical Design)
Description:
Ruggedisation ofgenerator is to make it strong and sturdy. Design includes modification in unitto operate engine
from -30º to 55ºc which overcomes cold start problem, lightweight and strong construction to reduce weight and
induce strength, ease of handling, and transportation. Heaters were used to keep the unit warm under colder
start, temperature sensors were used to measure inner temperature ofunitbased on which unitusers will decide
whether to start engine or to wait for some more time.
Responsibilities:
o Purchase Order study
o Proposal design and Interact with customer
o Actual design process, Material procurement and placing order for brought out parts
o Review with internal team and customer
o Creating production drawings and release for fabrication
o Interaction with assembly unit
o Testing of the unit(Vibration, EMI/EMC, Bump tests)
4. Project: : Control and Monitoring Panel (CMP).
Role : Lead Engineer (Mechanical Design)
Description:
As the name itself suggest that, to access the communication under the sea level, unit has designed so that it
perfectly insulated with all the water sealing gaskets, so that a drop of water should not enter the unit, also
additional care has been taken to resist 300G shock test, mounted the sophisticated electrical components
without causing any problem for wiring and routing of electrical cables.
Responsibilities:
o Purchase Order study
o Proposal design and Interact with customer
o Actual design process, Material procurement and placing order for brought out parts
o Review with internal team and customer
o Studying heat flow transfer using CFD tool
o Creating production drawings and release for fabrication
o Interaction with assembly unit
o Testing of the unit(Vibration, EMI/EMC, Shock tests)
Project: : 2 Channel Conduction Cooled ATR.
Role : Lead Engineer (Mechanical Design)
Description:
This Rugged enclosure is frequentlyused for very onerous naval application.The heatgenerated within the
enclosure is strategicallyconducted through to the outer surface with in fins arrangementand ambientair is then
used to cool theses surface and enclosure made hermeticallysealed.This ATR is manufactured from precision
machined Aluminum and incorporate a versatile and patented “high integrity frame” construction technique.
Responsibilities
o Purchase Order study
o Proposal design and Interact with customer
o Actual design process, Material procurement and placing order for brought out parts
o Review with internal team and customer
o Studying heat flow transfer using CFD tool
o Creating production drawings and release for fabrication
o Interaction with assembly unit
o Testing of the unit (Heat transfer tests)
DOB: 19/10/1986
Permanent Address: Sankamma Sadana, H.No 01, Vidya nagar,Bailhongal, DI:Belgaum