1. Ashwin Sowdi
Associate Project Manager
HCL Tech
Email:
asowdi@gmail.com
Address:
#33, Fg-2, S.L.V.Comforts,
Ramanjaneya Nagar, Chikkalsandra,
Bengaluru – 560061 Karnataka
Personal Data:
Date of Birth : 26/04/1983
Sex : Male
Nationality : Indian
Marital Status: Married
Awards won :-
O Infinity League
Spot award
Innovation award
Value creation
Long service award
Certification’s :-
Technical Enrichment by NTTF
3D Unigraphics by MS Ramaigh
Systems training by MABS
Brake Maintenancetraining by
MABS
Innovative Product
Development And Design
Methods by IISC
Lean Six Sigma- Green Belt
Reporting :-
Direct Reporting To
Senior Technical Manager
Employment Recital
Member technical staff
Year - 2005
Senior Technical staff-2007
Lead Engineer Year -2009
Project Lead Year -2011
Promoted as Associate Project
Manager – 2013
With a Performance Rating of
“Outstanding”
About me
https://in.linkedin.com/in/ashwi
nsowdi
Seeking assignments in Project Management with an organization of high repute
Career Objective
To work in tandem with a team in a challenging and competitive environment
where I could improve my knowledge, capabilities and put them to use for the
development of the organization
Profile Snapshot
A competent Mechanical professional with 11 years of accomplished career
in the Role of Associate Project Manager for Aerospace CAD domain and application group.
Key Achievements listed below.
Demonstrated excellent Project Management skill in activities like Scheduling,
Tracking, Team Appraisal KPI setting and Review, Resource management, Time &
Project management, Customer Relation, On-site & Offshore co-ordination, Design
estimates, Bid preparation and Proposal writing
Cost optimization technique using best practice method
Successful handling large team of 20+ engineers
Strategy Building for team management and Established training management
system.
Partnered with HR/TD for Team Competency parameters development
Worked on more than 10+ programs as Design and drafting engineer.
Worked as Lead designer of landing gear unit for new program.
Involved in Preliminary and Critical Design Review (PDR & CDR)
meetings.
Demonstrated excellent skill in CAD tools such as Catia, Solid works, Solid edge
Achieved goals of 10K per year ECR closure activity
Developed Work Instruction for Drawing, Model creation
Established IT Instruction for PDM/PLM installation
Introduced Mentoring Initiative & Review system mechanism.
Developed MS excel dashboard, Chart, Table automation for PM activities
Developed Automation Scripts in CATVBA to enhance productivity
Developed 10+ Utility Tools for cycle time reduction and defect control by computer
programming
Trained more than 50 engineers on various topics and Received Excellent Rating in
hosted Trainings by HCL training academy
Partnered with quality team to set Project Artifacts
Successful handling of major Certification Audits (internal and external)
11+ years association with first company and 9+ years with Aerospace client
Education
Bachelor of Engineering in Mechanical Engineering 2004
Visveswaraiah Technological University, Belgaum
Diploma in Mechanical Engineering 2001
Board of Technical Education- Bangalore
2. Extensive experience in aircraft industry enhanced technical skill in dealing with Design, manufacturing drawing
creation, GDnT, Stackup, Fixture designs etc…
An effective, innovative professional with strong analytical, negotiating, team management & problem solving
skills.
Self-motivated individual contributor, as well as a collaborative team player.
Possesses an innate passion for professional ethics and adherence to company’s core values.
Achieves the desired results/outcomes while keeping the team’s capability in account.
Exceptional handling of quality audits.
Individual contributor with an entrepreneurial and strong team work spirit.
Excellent communication and people management skills, manage and successfully complete complex
assignments, inculcate research approach to problems, hold experience in handling different teams of various
orders and adept in handling crises
Extensive travel experience enhanced my skills of dealing with diversity. An entourage of people has always
boosted my people skills. Spending time with the employee & team and training fraternity has reinforced my
learning abilities.
Excellent problem solving skill using software programming for MS office and CAD tools
Professional Summary:
9+ years aerospace industry experience
Expertise in CAD tools : Catia V5, Solid Works, Solid Edge
Expertise in PDM PLM package SmarTeam
Has a good experience on Project Management activities like Scheduling, Tracking, Resource management,
Time & Project management, Customer Relation, On-site & Offshore co-ordination, Design estimates, Bid
preparation and Proposal writing.
Responsible for delivering projects against agreed Scope, Budget, and Schedule & Customer expectations. Doing
this whilst supervising, directing & motivating of multi-discipline team members.
Good conflict management and prioritization skills.
Manage technical process and resolve technical issues.
Demonstrated ability to work with and support cross-functional project teams.
Strong attention to detail and focus on task completion.
Six Sigma Green Belt certified professional
Worked for Design and development of Aircraft Brakes, industrial Refrigeration units, Auxiliary power units,
Hands on experience in test rig design and development
Hands on experience in taking care of internal and external audits
Attributes Offered
HCL Technologies – Associate Project Manager (Feb 2005 – Until Date)
3. Recent Project Details:
Project: Modifications, Modelling and Detailing of Aircraft Brake Components
Software: Catia V5 and SmarTeam, SAP
Role: Sr CAD engineer Jun 2007 till Jan 2013
Objective:- Design modification, modelling of casting and machining components. Modelling and product
definition of manufacturing components such as Torque tubes, break housing, Rotor, actuator, inboard and
outboard wheel of aircraft brakes. Assembly of Main gear wheel, nose gear wheel and brake. New torque tubes
are been modelled using bar stock materials and manufacturing drawings are been generated as per the
standards and released for production
Role Played:
Aircraft Wheel and Brake – Design and Validation
Aircraft Brake Control Systems – Design Support
Prepared assembly, detail and production/machining drawing and shared with customer for Critical Design
Review (CDR) and released to the production
Verified the scope on each stages like design standards, detail design requirements, process specifications to
support task performance.
Executed the concept design and shared with customer for Preliminary Design Review (PDR)
Material selection for the fixture design based on customer requirement.
Client Interfacing: Project Management and Co-Ordination.
Understand customer product, process and people. Coordinate Onsite / Offshore design efforts. Review, track
project status. Brake Design support for new programs whilst at onsite.
Familiarizing the team members with the Customer needs, design standards, detail design requirements,
process specifications to support task performance.
Requirement study, analysis and preparing the Design Approach Paper
Responsible to create ideas which gives more value to the customer.
Generating BOM and check list for the product.
Participate in design review meetings to understand technical & functional systems overview.
Training on Product / Process to the new joinees.
Conducting Preliminary design review and Critical Design Review
Hands on experience in PDM/PLM package SmarTeam
Monitoring and controlling the project with Project Health Status report and sharing with the Project Manager
and Customer by week basis.
Design Modifications by incorporating Design changes wherever applicable and also to meet the analysis
requirements
Design of inspection fixture for landing gear units.
Fasteners Selection as per NAS Standards, Created the manufacturing drawings and Interface control drawings
as per ASME standards
Hands on experience in Generation of weight report and BOM.
Hands on experience in Generation of Tolerance Stack-Up Analysis Report
Co-ordinating with an on-site team with daily telecons and tracking the daily intermediate deliveries.
Facilitating counselling on problems to enable personnel to exhibit high level of performance.
Responsible for identifying training needs through various methods and implementing the team’s annual
training and development plan.
Designed and implementing Training policies, Training Management systems & procedures for training
operations.
Introduced Teambuilding program and interviewing skill training program.
Active participation in Value creation activities
4. Project: Design of Fire Detector Production Fixtures for Aircraft
Software: Catia V5
Role: CAD engineer Jan 2006 till May 2007
Objective: Design of fabrication and inspection fixture for the fire Detector assembly, the task is to design of
Welding Fixture for fire detector, the design should serve two needs one for welding and another is inspection
Roles played:
Design Modifications by incorporating Design changes wherever applicable and also to meet the analysis
requirements
Design for providing both inspection fixture and Welding Fixture
Work instruction preparation
Material selection for the pallet design as per aerospace standards and to have strong stress corrosion
resistance
Fasteners Selection as per NAS Standards, Created the manufacturing drawings and Interface control drawings
as per ASME standards
Generation of weight report and BOM.
Co ordinate with onsite engineer for updating daily status
Generation of Tolerance Stack-Up Analysis Report
Project: Modelling, Detailing and Assembly of the Refrigeration and Air conditioning components
Software: Solid Edge
Role: CAD engineer May 2005 till Dec2006
Objective: Project involves modelling, detailing and assembly of various components of the Refrigeration and
Air conditioning Plant. This involves the creation of parametric models and manufacturing Drawings as per the
Standards of the client. Creation of Source Control Drawings using as per the requirements of the client. The
project is carried out at client location GERMANY for 3 months.
Roles played:
Modelling, Detailing and assembly of refrigeration Plant which includes components like Compressors, Heat
Exchangers, Suction receivers, Liquid receivers valves and Piping.
Incorporation of Design changes in the models and creation of manufacturing Drawings as per the Standards
of the client.
Quality checking and delivery of files as per client specification.
Coordination between the Client and the work carried out in India. Design & development of customized
products based on customers' specific needs and continuous up-gradation of product quality by reducing
defects
5. Conducted training programs in areas of team building, attitude building, Leadership besides creativity, communication
skills and Toyota Way, people management, Performance Review and Feedback ,Train the Trainer, First Level Leaders
program, Execution excellence.
Microsoft Excel - Formula and Application
Interview Skills for leads
Team performance review and feedback
Catia V5 Modelling and detailing
CAT VBA macro basics and usage
SAP training with respect to project need
Quality audits preparation and handling
Project closure requirement and importance
Communication and impact
Conducted training sessions for college graduates on interview facing skills and etiquettes, Work-Life balance.
Reading Books, Photography, Listening to Music contributes to hobbies.
English: Read –Write – Speak
Hindi: Read –Write – Speak
Kannada : Read –Write – Speak
Declaration
I hereby declare that all the details furnished above are true to the best of my knowledge and belief.
I strive for excellence in every department entrusted to, with my personal skills and ability, so provide me an
opportunity to grow along with the company to the zenith of the corporate ladder in the long run and in turn add
value to the society.
Date : Ashwin Sowdi
Bangalore
Training Conducted
Activities & Interests
Languages Known