Amol Buttepatil is a senior project engineer with over 12 years of experience in industrial automation, electrical, and instrumentation work. He has individually handled 15 turnkey boiler projects for Forbes Marshall, planning team work and handling all automation aspects. These include understanding design documents, performing on-site installation and testing of various control systems and field devices, and ensuring projects are completed on schedule. Buttepatil is proficient in Siemens and Allen Bradley control systems and has managed projects in various industries across India and internationally. He holds a B.E. in electronics and telecommunications and is currently seeking new opportunities in industrial automation.
Justin Mathew is a Mechanical Commissioning Engineer currently working at Grandweld Shipyards in Dubai. He has over 5 years of experience in shipbuilding and ship repair. His responsibilities include coordinating installation, commissioning, and testing of marine machinery. He holds a B.E. in Mechanical Engineering and an MBA in Operations Management. He is seeking new opportunities in shipbuilding, maritime consultancy, or classification societies.
Veerakamu C. is a senior piping engineer with over 15 years of experience in piping design for petrochemical, refinery, and power plant projects. He has extensive experience in piping modeling, isometric drawing generation, material take-off, and coordination. Some of his project experiences include the CFP2020 project in Kuwait for KNPC, the Nghi Son Refinery project in Vietnam, and the Wasit Gas Plant project in Saudi Arabia. He is proficient in piping software such as PDS, SP3D, AutoCAD, and MicroStation.
This curriculum vitae summarizes the qualifications and experience of Muhamad Guntur. He has a Bachelor's Degree in Metallurgical Engineering from Jenderal Achmad Yani University in Bandung, Indonesia. He has over 10 years of experience working in quality assurance and quality control roles on oil and gas projects in several countries in Europe and Asia. He has extensive training and certifications in welding inspection, non-destructive testing, and international codes and standards.
Muhammad Ali is a piping engineer currently working for SPEC Energy DMCC in Dubai. He has over 5 years of experience in designing and engineering piping systems for oil and gas projects. Some of his major projects include the Gambat South Gas Processing Facility in Pakistan and the Crude Oil Processing Facility for Hunt Oil's Ain Sifni project in Iraq. He holds a BSc in Mechanical Engineering and is proficient in various piping design software such as AutoCAD Plant 3D, Cadworx, and CAESAR II.
1. The document provides details of the person's work experience including positions held as an engineer working on oil and gas pipeline projects in India, Saudi Arabia, UAE, and other countries over the past 15 years.
2. Responsibilities in various roles included engineering design, project management, construction supervision, quality control inspection, and operations and maintenance of pipeline systems and facilities.
3. Employers included major oil and gas companies as well as engineering and construction firms working on large pipeline and facility projects across multiple industries.
This document is a curriculum vitae for Vijayakumar M, a Substation Testing and Commissioning Engineer. It summarizes his professional experience testing and commissioning substations up to 765kV as a senior engineer in India and Qatar. It also lists his technical skills, test kits handled, and notable projects in India and Qatar with Digital Energy and Larsen & Toubro testing various substations up to 220kV.
1. Arijanto Eddy Pratomo is applying for the position of Lead Piping Engineer and has over 30 years of experience in piping engineering and project management in Indonesia.
2. He received a degree in chemical engineering from Gadjah Mada University in 1980 and has undergone several training programs in strategic management, auditing, and professional engineering.
3. His work experience includes serving as the Lead Piping Engineer on multiple oil and gas projects in Indonesia, working with companies like Pertamina, Chevron, and BP over the past 15 years.
Nirmal Kumar is a piping engineer with over 6 years of experience in oil and gas refineries. He has extensive experience in piping design, cost estimation, site surveys, and project management. Nirmal holds a Bachelor's degree in Mechanical Engineering and is proficient in CADWorx Plant, PDMS, AutoCAD, and other piping design software. He currently works as a Design Engineer in Kuwait, where he is responsible for piping layouts, calculations, stress analysis, and project coordination.
Justin Mathew is a Mechanical Commissioning Engineer currently working at Grandweld Shipyards in Dubai. He has over 5 years of experience in shipbuilding and ship repair. His responsibilities include coordinating installation, commissioning, and testing of marine machinery. He holds a B.E. in Mechanical Engineering and an MBA in Operations Management. He is seeking new opportunities in shipbuilding, maritime consultancy, or classification societies.
Veerakamu C. is a senior piping engineer with over 15 years of experience in piping design for petrochemical, refinery, and power plant projects. He has extensive experience in piping modeling, isometric drawing generation, material take-off, and coordination. Some of his project experiences include the CFP2020 project in Kuwait for KNPC, the Nghi Son Refinery project in Vietnam, and the Wasit Gas Plant project in Saudi Arabia. He is proficient in piping software such as PDS, SP3D, AutoCAD, and MicroStation.
This curriculum vitae summarizes the qualifications and experience of Muhamad Guntur. He has a Bachelor's Degree in Metallurgical Engineering from Jenderal Achmad Yani University in Bandung, Indonesia. He has over 10 years of experience working in quality assurance and quality control roles on oil and gas projects in several countries in Europe and Asia. He has extensive training and certifications in welding inspection, non-destructive testing, and international codes and standards.
Muhammad Ali is a piping engineer currently working for SPEC Energy DMCC in Dubai. He has over 5 years of experience in designing and engineering piping systems for oil and gas projects. Some of his major projects include the Gambat South Gas Processing Facility in Pakistan and the Crude Oil Processing Facility for Hunt Oil's Ain Sifni project in Iraq. He holds a BSc in Mechanical Engineering and is proficient in various piping design software such as AutoCAD Plant 3D, Cadworx, and CAESAR II.
1. The document provides details of the person's work experience including positions held as an engineer working on oil and gas pipeline projects in India, Saudi Arabia, UAE, and other countries over the past 15 years.
2. Responsibilities in various roles included engineering design, project management, construction supervision, quality control inspection, and operations and maintenance of pipeline systems and facilities.
3. Employers included major oil and gas companies as well as engineering and construction firms working on large pipeline and facility projects across multiple industries.
This document is a curriculum vitae for Vijayakumar M, a Substation Testing and Commissioning Engineer. It summarizes his professional experience testing and commissioning substations up to 765kV as a senior engineer in India and Qatar. It also lists his technical skills, test kits handled, and notable projects in India and Qatar with Digital Energy and Larsen & Toubro testing various substations up to 220kV.
1. Arijanto Eddy Pratomo is applying for the position of Lead Piping Engineer and has over 30 years of experience in piping engineering and project management in Indonesia.
2. He received a degree in chemical engineering from Gadjah Mada University in 1980 and has undergone several training programs in strategic management, auditing, and professional engineering.
3. His work experience includes serving as the Lead Piping Engineer on multiple oil and gas projects in Indonesia, working with companies like Pertamina, Chevron, and BP over the past 15 years.
Nirmal Kumar is a piping engineer with over 6 years of experience in oil and gas refineries. He has extensive experience in piping design, cost estimation, site surveys, and project management. Nirmal holds a Bachelor's degree in Mechanical Engineering and is proficient in CADWorx Plant, PDMS, AutoCAD, and other piping design software. He currently works as a Design Engineer in Kuwait, where he is responsible for piping layouts, calculations, stress analysis, and project coordination.
Sukumar K is a piping engineer with over 4 years of experience in industries like pulp and paper, energy generation, and petrochemicals. He is currently working in Saudi Arabia as a piping layout engineer for a major petrochemical plant. His expertise includes detailed engineering, project execution, AutoCAD, piping stress analysis, and construction management. Previously he has worked on projects in India for paper and chemical plants. He holds a bachelor's degree in mechanical engineering.
This resume summarizes Surendra Babu Tellakula's professional experience as a piping engineer with over 13 years of experience in piping design and engineering for oil and gas projects. He has worked on numerous offshore projects in various roles including as a lead piping engineer and module lead. His experience includes tasks such as piping layout design, detail engineering, support modeling, technical evaluations, and inter-discipline coordination. He also lists his educational qualifications and references.
Nitin Kumar Jain is seeking a position in mechanical engineering. He has over 12 years of experience in mechanical design, detailing, engineering, procurement, inspection and installation of static and specialized equipment for the petrochemical industry. Currently he is a senior engineer at Haldor Topsoe leading proprietary hardware projects and providing design, inspection, and installation supervision. Previously he worked at PDIL where he was involved in various projects in roles including design, cost estimation, and project management. He is proficient in software such as PV-Elite and has extensive experience managing projects in India and abroad.
Rajendra Prajapat has over 3 years of experience in piping design engineering. He has extensive experience in 3D modeling, piping layouts, isometric drawings, and bill of materials preparation. He is currently working as a Piping Design Engineer for Larsen & Toubro Technology Services on projects in various industries including oil and gas, chemicals, and food. He has strong skills in AutoCAD, AutoCAD Plant 3D, Inventor, and other piping design software.
Electrical Engineer with 7 years of Experience in Expediting of Refinery Expansion Projects & Inspection of Electrical and Instrumentation Equipment’s, working with the objectives and Targets aimed at the achievements of the Company’s short and long term.
Steve Athan has over 26 years of experience in piping and layout design engineering, predominantly for oil and gas and petrochemical projects. He has managed teams of up to 100 personnel on multiple projects globally. Athan specializes in conceptual design, detailed design, and field engineering. He has extensive experience developing projects in Australia, Southeast Asia, China, Europe and the Middle East.
This document is a curriculum vitae for Mr. Hitesh P. Desai that includes his contact information, personal details, objectives, and employment history. It summarizes his 20 years of experience as a Pipeline Construction Manager and Piping Engineer on various oil and gas projects in India and overseas. It lists his roles and responsibilities on 6 key projects between 1997-2015, which involved supervising pipeline construction, coordinating workforces, ensuring safety standards, and meeting project deadlines.
Ramy Emad Messeha Gerges is an Egyptian Project Engineer with over 10 years of experience in the oil and gas industry. He has worked on numerous projects in the UAE and Egypt for companies such as Valentine Maritime, Lamprell Energy, and Leighton Off Shore Middle East. His roles have included engineering, construction, installation, and project management. Gerges received a Bachelor's degree in Mechanical Engineering from Ain Shams University in Egypt. He also holds certifications in project management, management skills, and visual welding inspection.
This document provides a summary of Jefferson T. Tulabot's qualifications and experience. It outlines his contact information, educational background, professional registrations, work history, skills, and familiarity with engineering standards. Some key details include:
- He has over 16 years of experience as a civil engineer and structural inspector in the Philippines and Saudi Arabia.
- His most recent role was with ILF & Partners Engineering Company as a civil engineer on pipeline and station projects for Saline Water Conversion Corporation.
- He has a Bachelor's degree in Civil Engineering and is a registered member of the Saudi Council of Engineers.
- His areas of expertise include pipeline design and construction, water and oil infrastructure, and power plant structures.
Koshalendra Pandey is an experienced engineering professional seeking a challenging position utilizing both technical and managerial skills. He has over 5.9 years of experience in project management, cost engineering, piping, and construction. Currently he is a Lead Engineer at ISGEC Heavy Engineering Limited, where he has worked for 5.6 years managing various chemical, boiler, and engineering projects. Previously he worked as a Senior Executive managing chemical process plant projects at SRF Limited. He holds an M.E. in Mechanical Engineering from BITS Pilani and a B.E. in Mechanical Engineering.
CV of Karan Vinayak - piping design engineerKaran Vinayak
I have experience in the field of Oil and Gas, Chemical Process Plant and Water Transmission Network Pipeline. (Piping Layout, Piping GAD, isometric, Bill of Materials, Pipeline Profile, Alignment Sheet, Co-Ordinate Drawing). I have software skills in Autocad, Autoplant, PDMS and CAESAR-II. Currently I am working in Sharjah on UG Water Pipeline Projects.
I am technically qualified for job positions like Piping/Pipeline Designer, Piping/Pipeline Engineer, Piping Quantity Estimator etc.
U. Siva Kumar is an electrical engineer with 13 years of experience in QA/QC roles for MEP projects. He has worked as a QA manager for Saudi Aramco and as a projects manager for construction companies in Qatar and India. He is proficient in preparing quality documents and inspecting electrical and mechanical equipment and installations.
The document provides a curriculum vitae for Bhimasen P Yadawad, a piping engineer with over 5 years of experience in roles such as piping design, layout, and engineering for projects in industries like oil and gas. Yadawad is seeking a new position where he can apply his expertise in areas like piping modeling, layout, isometrics, and knowledge of standards and software like AutoCAD, SP3D, and Navisworks. His experience includes projects for companies in India and abroad working with clients in industries including oil and gas.
Susheel Zalpuri is a senior project management professional with over 16 years of experience in fields including project management, design engineering, commissioning, and operations. He has expertise in electrical and instrumentation projects and is currently working as a project engineer in Dubai on projects like airport infrastructure upgrades. The document provides details of his educational background and work history managing projects for companies in India and the UAE.
This document is a curriculum vitae for Raveendra Babu Cherukuru, a civil structural engineer. It summarizes his contact information, education qualifications including a master's degree in structural engineering and bachelor's degree in civil engineering. It also outlines his 10 years of experience in structural engineering projects for organizations like PL Engineering and Videocon Group. His technical skills include design of RCC and steel structures using software like STAAD Pro and ETABS. Key projects included design of structures for a polysilicon production plant in Qatar and an oil storage tank project in Kuwait.
Deepak Khurana has over 11 years of experience in the oil, gas, petrochemical, and chemical industries. He has expertise in shutdowns and construction projects, providing technical support and coordinating site activities. Currently he is a senior piping construction engineer at Toyo Engineering India Private Ltd, where he has worked on projects for GSPC, BASF, and Indian Synthetic Rubber Limited. He has a bachelor's degree in mechanical engineering and is proficient in Microsoft Office, AutoCAD, and project planning software.
This curriculum vitae provides biographical information about Karanam Manoranjan Babu, including his educational qualifications and professional experience. He has over 28 years of experience in the fertilizer industry, having worked at Krishak Bharati Cooperative Ltd. in India for over 22 years before joining Oman India Fertilizer Company in Oman. He holds a B.Tech in Chemical Engineering and has extensive experience in process engineering, plant operations, projects, and energy management across ammonia, urea, and utility plants.
Krishna Kumar has over 16 years of experience as an electrical design professional working on projects in the oil and gas, power, and industrial sectors. He has expertise in detailed engineering, design, and project execution. Some of his project experiences include interconnection pipelines for GASCO in Abu Dhabi, replacement of power supply systems for ADCO in Abu Dhabi, and front-end engineering design for compressor replacement at a GASCO facility in Abu Dhabi. Currently he works as a Design Engineer at PL Engineering in Abu Dhabi.
Ankita Bhowmick has 7 years of experience as a Process Engineer in chemical and fertilizer engineering projects. She is currently working at CFI Technologies Pvt. Ltd. as a Process Engineer, where she is responsible for preparation of process diagrams, heat and mass balances, equipment specifications, and hazard studies for DAP and NPK fertilizer plants. Previously, she worked at Himadri Chemicals and Industries Ltd. as a Process Engineer, where she was responsible for plant operations, mass and heat balances, and quality control. She holds an M.Sc. in Environmental Sciences and a B.Tech. in Chemical Engineering.
Amol Sawant (Piping Engineer with 10 years experience) docxAmol Sawant
Amol Sawant is a senior piping engineer with 10 years of experience in refineries, oil and gas, and fertilizer projects. He has experience managing teams of 5-8 people and fulfilling roles such as layout designer, PMC engineer, and ISO coordinator. He is proficient in SmartPlant Review, Navisworks, PDS, Caesar II, and other piping software. His most recent roles include working as a piping engineer for Medgulf Construction in Qatar and Tecnimont ICB in India.
This document provides details of Francis A. D'costa's professional experience and qualifications. He has over 18 years of experience in instrumentation design engineering for oil and gas projects. His current role is as a Senior Lead Engineer at TEBODIN Middle East Company Ltd in Abu Dhabi, where he performs instrumentation design, engineering, procurement, and project management duties. Previously he held similar roles at IOT Design & Engineering Ltd, SNC Lavalin, and UHDE India Ltd, working on various oil, gas, and petrochemical projects in India and abroad.
R. Rajasekaran is applying for the position of Senior Piping Designer. He has 14 years of experience in piping design, primarily for oil and gas projects in the Middle East. Currently, he works as a Senior Piping Designer at Tebodin & Partner LLC in Oman, where he is responsible for coordinating design teams, modeling in PDMS software, and producing piping plans, isometrics, and material take-offs. He has extensive experience working on projects for companies like Petroleum Development Oman, Occidental of Oman, and Oman Gas Company.
Sukumar K is a piping engineer with over 4 years of experience in industries like pulp and paper, energy generation, and petrochemicals. He is currently working in Saudi Arabia as a piping layout engineer for a major petrochemical plant. His expertise includes detailed engineering, project execution, AutoCAD, piping stress analysis, and construction management. Previously he has worked on projects in India for paper and chemical plants. He holds a bachelor's degree in mechanical engineering.
This resume summarizes Surendra Babu Tellakula's professional experience as a piping engineer with over 13 years of experience in piping design and engineering for oil and gas projects. He has worked on numerous offshore projects in various roles including as a lead piping engineer and module lead. His experience includes tasks such as piping layout design, detail engineering, support modeling, technical evaluations, and inter-discipline coordination. He also lists his educational qualifications and references.
Nitin Kumar Jain is seeking a position in mechanical engineering. He has over 12 years of experience in mechanical design, detailing, engineering, procurement, inspection and installation of static and specialized equipment for the petrochemical industry. Currently he is a senior engineer at Haldor Topsoe leading proprietary hardware projects and providing design, inspection, and installation supervision. Previously he worked at PDIL where he was involved in various projects in roles including design, cost estimation, and project management. He is proficient in software such as PV-Elite and has extensive experience managing projects in India and abroad.
Rajendra Prajapat has over 3 years of experience in piping design engineering. He has extensive experience in 3D modeling, piping layouts, isometric drawings, and bill of materials preparation. He is currently working as a Piping Design Engineer for Larsen & Toubro Technology Services on projects in various industries including oil and gas, chemicals, and food. He has strong skills in AutoCAD, AutoCAD Plant 3D, Inventor, and other piping design software.
Electrical Engineer with 7 years of Experience in Expediting of Refinery Expansion Projects & Inspection of Electrical and Instrumentation Equipment’s, working with the objectives and Targets aimed at the achievements of the Company’s short and long term.
Steve Athan has over 26 years of experience in piping and layout design engineering, predominantly for oil and gas and petrochemical projects. He has managed teams of up to 100 personnel on multiple projects globally. Athan specializes in conceptual design, detailed design, and field engineering. He has extensive experience developing projects in Australia, Southeast Asia, China, Europe and the Middle East.
This document is a curriculum vitae for Mr. Hitesh P. Desai that includes his contact information, personal details, objectives, and employment history. It summarizes his 20 years of experience as a Pipeline Construction Manager and Piping Engineer on various oil and gas projects in India and overseas. It lists his roles and responsibilities on 6 key projects between 1997-2015, which involved supervising pipeline construction, coordinating workforces, ensuring safety standards, and meeting project deadlines.
Ramy Emad Messeha Gerges is an Egyptian Project Engineer with over 10 years of experience in the oil and gas industry. He has worked on numerous projects in the UAE and Egypt for companies such as Valentine Maritime, Lamprell Energy, and Leighton Off Shore Middle East. His roles have included engineering, construction, installation, and project management. Gerges received a Bachelor's degree in Mechanical Engineering from Ain Shams University in Egypt. He also holds certifications in project management, management skills, and visual welding inspection.
This document provides a summary of Jefferson T. Tulabot's qualifications and experience. It outlines his contact information, educational background, professional registrations, work history, skills, and familiarity with engineering standards. Some key details include:
- He has over 16 years of experience as a civil engineer and structural inspector in the Philippines and Saudi Arabia.
- His most recent role was with ILF & Partners Engineering Company as a civil engineer on pipeline and station projects for Saline Water Conversion Corporation.
- He has a Bachelor's degree in Civil Engineering and is a registered member of the Saudi Council of Engineers.
- His areas of expertise include pipeline design and construction, water and oil infrastructure, and power plant structures.
Koshalendra Pandey is an experienced engineering professional seeking a challenging position utilizing both technical and managerial skills. He has over 5.9 years of experience in project management, cost engineering, piping, and construction. Currently he is a Lead Engineer at ISGEC Heavy Engineering Limited, where he has worked for 5.6 years managing various chemical, boiler, and engineering projects. Previously he worked as a Senior Executive managing chemical process plant projects at SRF Limited. He holds an M.E. in Mechanical Engineering from BITS Pilani and a B.E. in Mechanical Engineering.
CV of Karan Vinayak - piping design engineerKaran Vinayak
I have experience in the field of Oil and Gas, Chemical Process Plant and Water Transmission Network Pipeline. (Piping Layout, Piping GAD, isometric, Bill of Materials, Pipeline Profile, Alignment Sheet, Co-Ordinate Drawing). I have software skills in Autocad, Autoplant, PDMS and CAESAR-II. Currently I am working in Sharjah on UG Water Pipeline Projects.
I am technically qualified for job positions like Piping/Pipeline Designer, Piping/Pipeline Engineer, Piping Quantity Estimator etc.
U. Siva Kumar is an electrical engineer with 13 years of experience in QA/QC roles for MEP projects. He has worked as a QA manager for Saudi Aramco and as a projects manager for construction companies in Qatar and India. He is proficient in preparing quality documents and inspecting electrical and mechanical equipment and installations.
The document provides a curriculum vitae for Bhimasen P Yadawad, a piping engineer with over 5 years of experience in roles such as piping design, layout, and engineering for projects in industries like oil and gas. Yadawad is seeking a new position where he can apply his expertise in areas like piping modeling, layout, isometrics, and knowledge of standards and software like AutoCAD, SP3D, and Navisworks. His experience includes projects for companies in India and abroad working with clients in industries including oil and gas.
Susheel Zalpuri is a senior project management professional with over 16 years of experience in fields including project management, design engineering, commissioning, and operations. He has expertise in electrical and instrumentation projects and is currently working as a project engineer in Dubai on projects like airport infrastructure upgrades. The document provides details of his educational background and work history managing projects for companies in India and the UAE.
This document is a curriculum vitae for Raveendra Babu Cherukuru, a civil structural engineer. It summarizes his contact information, education qualifications including a master's degree in structural engineering and bachelor's degree in civil engineering. It also outlines his 10 years of experience in structural engineering projects for organizations like PL Engineering and Videocon Group. His technical skills include design of RCC and steel structures using software like STAAD Pro and ETABS. Key projects included design of structures for a polysilicon production plant in Qatar and an oil storage tank project in Kuwait.
Deepak Khurana has over 11 years of experience in the oil, gas, petrochemical, and chemical industries. He has expertise in shutdowns and construction projects, providing technical support and coordinating site activities. Currently he is a senior piping construction engineer at Toyo Engineering India Private Ltd, where he has worked on projects for GSPC, BASF, and Indian Synthetic Rubber Limited. He has a bachelor's degree in mechanical engineering and is proficient in Microsoft Office, AutoCAD, and project planning software.
This curriculum vitae provides biographical information about Karanam Manoranjan Babu, including his educational qualifications and professional experience. He has over 28 years of experience in the fertilizer industry, having worked at Krishak Bharati Cooperative Ltd. in India for over 22 years before joining Oman India Fertilizer Company in Oman. He holds a B.Tech in Chemical Engineering and has extensive experience in process engineering, plant operations, projects, and energy management across ammonia, urea, and utility plants.
Krishna Kumar has over 16 years of experience as an electrical design professional working on projects in the oil and gas, power, and industrial sectors. He has expertise in detailed engineering, design, and project execution. Some of his project experiences include interconnection pipelines for GASCO in Abu Dhabi, replacement of power supply systems for ADCO in Abu Dhabi, and front-end engineering design for compressor replacement at a GASCO facility in Abu Dhabi. Currently he works as a Design Engineer at PL Engineering in Abu Dhabi.
Ankita Bhowmick has 7 years of experience as a Process Engineer in chemical and fertilizer engineering projects. She is currently working at CFI Technologies Pvt. Ltd. as a Process Engineer, where she is responsible for preparation of process diagrams, heat and mass balances, equipment specifications, and hazard studies for DAP and NPK fertilizer plants. Previously, she worked at Himadri Chemicals and Industries Ltd. as a Process Engineer, where she was responsible for plant operations, mass and heat balances, and quality control. She holds an M.Sc. in Environmental Sciences and a B.Tech. in Chemical Engineering.
Amol Sawant (Piping Engineer with 10 years experience) docxAmol Sawant
Amol Sawant is a senior piping engineer with 10 years of experience in refineries, oil and gas, and fertilizer projects. He has experience managing teams of 5-8 people and fulfilling roles such as layout designer, PMC engineer, and ISO coordinator. He is proficient in SmartPlant Review, Navisworks, PDS, Caesar II, and other piping software. His most recent roles include working as a piping engineer for Medgulf Construction in Qatar and Tecnimont ICB in India.
This document provides details of Francis A. D'costa's professional experience and qualifications. He has over 18 years of experience in instrumentation design engineering for oil and gas projects. His current role is as a Senior Lead Engineer at TEBODIN Middle East Company Ltd in Abu Dhabi, where he performs instrumentation design, engineering, procurement, and project management duties. Previously he held similar roles at IOT Design & Engineering Ltd, SNC Lavalin, and UHDE India Ltd, working on various oil, gas, and petrochemical projects in India and abroad.
R. Rajasekaran is applying for the position of Senior Piping Designer. He has 14 years of experience in piping design, primarily for oil and gas projects in the Middle East. Currently, he works as a Senior Piping Designer at Tebodin & Partner LLC in Oman, where he is responsible for coordinating design teams, modeling in PDMS software, and producing piping plans, isometrics, and material take-offs. He has extensive experience working on projects for companies like Petroleum Development Oman, Occidental of Oman, and Oman Gas Company.
This document provides a 3-page curriculum vitae for Amaladas ANTO, an experienced Instrumentation and Control professional with over 23 years of experience working on oil, gas, and petrochemical projects. It details his educational background and professional experience working for various companies such as Mott MacDonald, Petrofac, Foster Wheeler, and more. It also provides a detailed employment history and descriptions of roles and responsibilities in different projects.
This resume is for Rahul Kumar Singh with over 9 years of experience in process control automation projects using DCS systems such as ABB 800xA, MOD5, Emerson DeltaV, and Rosemount. He has worked on projects in oil/gas, refinery, and chemical industries. The resume provides details of his work history, areas of expertise, training, and responsibilities on various projects. Key roles include project lead, system engineer, and providing technical guidance to project teams.
Vivek Mehta has over 3 years of experience working as a senior project engineer on automation projects. He has extensive experience programming PLCs and SCADA systems from Honeywell including the DCS C300, PLCs HC900 and ML200, and SCADA platforms like EPKS. He has worked on numerous projects in India for companies across various industries. His responsibilities have included I/O configuration, graphics development, logic programming, testing, installation, and commissioning. He is proficient in programming languages like FBD and ladder logic.
This document provides a summary of the career and qualifications of R. Vijaya Kumar, a piping design engineer with over 13 years of experience in piping design, engineering, and project management for oil and gas projects. It outlines his responsibilities and software experience, and lists relevant projects with employers like Samsung Engineering, Fluor Arabia Limited, Bechtel, and Foster Wheeler in locations like India, the United States, and Saudi Arabia.
Ramanuja Sharma is an instrumentation engineer with over 14 years of experience in various industries including oil and gas, nuclear power, minerals processing, chemicals, and water treatment. He is currently working as an Engineer-3 at Sidvin Coretech providing engineering design services for oil and gas projects. He has worked on projects for major companies and held roles with increasing responsibility at Hindustan Dorr Oliver, Invensys India, and Yokogawa.
Manthrala Subba Rao is applying for a senior designer/mechanical engineer position. He has over 35 years of experience in designing and checking equipment like drums, columns, heat exchangers, and pressure vessels for refineries, petrochemical plants, and other process facilities. He is proficient in AutoCAD and pressure vessel codes and has worked on numerous international projects around the world.
T. Gunalan is a mechanical engineer with over 10 years of experience in piping design and 3D modeling using PDMS and AutoCAD. He has worked on several oil and gas and power plant projects for companies in India and the UAE. His responsibilities have included piping modeling, equipment modeling, 2D drawing extraction, clash checking, and preparing fabrication drawings. He is seeking a position with an organization where he can continue developing his skills in piping design and 3D modeling.
This document contains the resume of Dheeraj Kumar Sony. It summarizes his professional experience as a Design Engineer at BNA Technology Consulting Ltd. since October 2013, where he is responsible for tasks like project monitoring and review, equipment layout design, network connectivity design, and vendor coordination. It also lists his educational qualifications and skills in areas like engineering, programming languages, applications, and project management.
Prasenjit Chaliha has over 5 years of experience as a piping design engineer for power plants and oil and gas projects. He has expertise in piping material selection, isometric checking, equipment orientation, stress analysis software, and 3D modeling software. He has worked on projects in India for hydroelectric power plants, cement plants, and has experience in project planning, coordination, and review. Prasenjit holds degrees in mechanical engineering and piping engineering and is proficient in AutoCAD, Navisworks, PDMS, and CAESAR II.
Sujitkumar Sanjay Phutane is a piping designer with over 10 years of experience working in PDMS and AutoCAD. He currently works as a senior piping designer at TEBODIN & PARTNERS LLC in Oman. Prior to this, he worked as a piping designer at PETROFAC ENGG. INDIA PVT. LTD and UHDE INDIA LTD. in India. He has extensive experience in designing and routing piping systems for oil, gas and petrochemical projects. His responsibilities include modeling equipment and piping, preparing piping plans, isometrics, plot plans and material take-offs.
- The document provides a summary of Sreekumar Pillai's professional experience and qualifications. He has over 30 years of experience in engineering, procurement, and construction management of refinery, fertilizer, oil and gas projects. He has led engineering teams and implemented software systems like SAP, PDS, PDMS. He has managed large projects in India and internationally for companies like Saudi Aramco, ONGC, and IOCL.
Vivek Mehta has over 2.6 years of experience working as a project engineer on automation projects. He has experience programming and commissioning DCS, PLC, and SCADA systems including Honeywell C300, HC900, and Experion systems. His responsibilities have included I/O configuration, programming in FBD, graphics development, testing, installation, commissioning, and training. He has a B.Tech in Electronics and Communication and is proficient in MS Office, Windows, and database software.
Sharvan Kumar has over 8 years of experience in piping design and plant engineering. He currently works as a Piping Design Engineer for TECHNIP in India. Previously, he has worked on projects for Braskem Idesa and in the power sector for DESEIN-INDURE and NTPC. Sharvan has extensive expertise in piping layout design, 3D modeling, underground piping systems, and preparing technical documentation. He is proficient in piping software such as PDS, AutoCAD, and Navisworks.
Mrunal Kothari's CV summarizes his career objective and experience in instrumentation and project management over 14+ years. He currently serves as General Manager of Instrumentation & Electrical at Enviro Control Associates, leading automation and electrical work on large wastewater treatment projects across India. Previously, he worked at Larsen & Toubro on oil and gas projects internationally in Qatar and domestically in India. He holds an MBA in Project Management and a B.E. in Instrumentation & Control.
Pintubhai Dilipbhai Darji has over 11 years of experience as a piping engineer working on projects for companies like Saudi Aramco, GS Engineering, and Shell. He has expertise in piping layout, 3D modeling, engineering management, and working according to various international codes and standards. The document provides details on his educational background and work experience on various projects in Saudi Arabia, Egypt, India, and Singapore.
This document provides a summary of Hemant S. Gurav's qualifications and experience as a Sr. PDMS Piping Designer. It includes details of his education such as an I.T.I. in Mechanical Drafting and various piping design software trainings. His over 18 years of experience includes roles with engineering consultants and EPC companies designing piping systems for oil/gas facilities. His current role involves piping modeling, modification studies, and support modeling for a project in Abu Dhabi.
Prakash Jawanji Goyal is an electrical engineer with over 10 years of experience in project design and development using PLCs, SCADA, HMIs, AC and DC drives, control panels, and more. He has extensive experience working with Siemens, Allen-Bradley, and other automation equipment on projects in various industries. Prakash is currently seeking new opportunities where he can utilize his skills in electrical system design, automation, commissioning, and customer support.
Chandrakant Kawathekar is a mechanical site engineer and project executive with over 4 years of experience in project management, operations, erection and commissioning. He has expertise in areas such as operations engineering, project planning and management, site management, and team management. Some of the projects he has worked on include spray pretreatment plants, paint booths and ovens, conveyor systems, and fire fighting systems for customers in various industries.
1. Curriculum Vitae
Amol Vasant Buttepatil
Sr.Project Engineer
Forbes Marshall
(B.E. E&TC)
Contact No: 9225504721
E Mail: amol.buttepatil@gmail.com
Work Experience:
Individually handling turnkey boiler projects related with automation,
electrical and instrumentation work ( 15 projects in 5.5 years of
ForbesMarshall)
Planning of team work for different boiler projects
12years in Industrial Automation, electrical and instrumentation field.
Understanding P&ID for instrument placement on field, all instrument
field connections and running it online.
Calibration and testing of SIEMENS and ABB transmitters, modulating
and on/off control valves field connections and testing.
Level sensors, ZSS sensors, linear transducers, R-I convertors,
SIEMENS actuators, Sequential timers, Air-regulators, pneumatic
valves, hydraulic cylinders field connections and testing
DOL, Star-Delta, RDOL motor connections and online testing.
Handling spare/material supply system for clients( PO, OA, Invoice
generation and material supply follow-up
Knowledge of hydraulic, pneumatic system, Bag filter, ESP, Drives,
control valves, Feed pumps, electric heaters, air compressors
Worked on different projects at different locations( more than 120)
Worked in United Kingdome and Italy for boiler projects.
Handling automation work of all projects in Forbesvyncke (Forbes
Marshall)
Current CTC - 11.2 Lakhs per annum excluding site expenses
Skills:
Field Knoledge Instrumentation and Elecrtical work
PLC, Siemens PLC-400,Siemens PLC-300, TIA PORTAL
SCADA, HMI WinCC, Win flex Runtime, TIA PORTAL
2. Curriculum Vitae
Industries worked with: - Food & Beverage Industries, Steel Plant, and
Power Plant. Chemical and Manufacturing Industries. Boiler
Project Details :
1) Project Name: DAS Solid fire Boiler (Forbesvyncke-ForbesMarshall)
Client : Hindustan Unilever Ltd.,
Site : Mysore. Karnataka
2) Project Name: DAS Solid fire Boiler (Forbesvyncke-ForbesMarshall)
Client : United Spirits Ltd.,
Site : Ponda. Goa
3) Project Name: DAS Solid fire Boiler (Forbesvyncke-ForbesMarshall)
Client : United Spirits Ltd.,
Site : Nashik. Maharashtra
4) Project Name: DAS Solid fire Boiler (Forbesvyncke-ForbesMarshall)
Client : Pepsico India Holdings Pvt. Ltd..,
Site : Ranjangaon. Maharashtra
5) Project Name: DAS Solid fire Boiler(Forbesvyncke-ForbesMarshall)
Client : Schreiber Dynamix Dairies Ltd.,
Site : Baramati. Maharashtra
6) Project Name: DAS Solid fire Boiler (Forbesvyncke-ForbesMarshall)
Client : Precot Meridian Ltd.,
Site : Hassan. Karnataka
7) Project Name: DAS Solid fire Boiler (Forbesvyncke-ForbesMarshall)
Client : Dr.Reddy's Laboratories.
Site : Devunipalavalasa. Andhra Pradesh
8) Project Name: DAS Solid fire Boiler (Forbesvyncke-ForbesMarshall)
Client : Citrus Processing India Pvt. Ltd.
Site : Nanded. Maharashtra
9) Project Name: DAS Solid fire Boiler (Forbesvyncke- ForbesMarshall)
Client : Sunpharma Industries Ltd.
3. Curriculum Vitae
Site : Ahmednagar. Maharashtra
10) Project Name: DAS Solid fire Boiler (Forbesvyncke- ForbesMarshall)
Client : Coca-Cola Industries Ltd.
Site : Wada. Maharashtra
11) Project Name: DAS Solid fire Boiler (Forbesvyncke- ForbesMarshall)
Client : SPR Distilleries Ltd..
Site : Mysore. Karnataka
12) Project Name: DAS Solid fire Boiler (Forbesvyncke- ForbesMarshall)
Client : Siporex India Ltd.
Site : Pune. Maharashtra
13) Project Name: DAS Solid fire Boiler (Forbesvyncke- ForbesMarshall)
Client : Siporex India Ltd.
Site : Tumkur. Karnataka
13) Project Name: DAS Solid fire Boiler (Forbesvyncke- ForbesMarshall)
Client : Godrej Industries Ltd.
Site : Walia. Gujrat
14) Project Name: Turbine Control & Boiler Section
Client : Turbo care, Italy (Torino).
Site : Syria.
15) Project Name: Coating and Processing
Client : Stein Atkinson Stordy, United Kingdom.
Site : Steel Dynamics INC., United Kingdom.
16) Project Name: EMS and Buffer system (Baramati).
Client : PIAGGIO, Baramati
4. Curriculum Vitae
17) Project Name: Spray Dryer MSD-327 & Boiler Section (Hyderabad).
Client : Mojj Engineering, Pune
18) Project Name: Jai Balaji Power Plant (Durgapur)
Turbine & Boiler Section
19) Project: Butter Milk Sterilization plant
Client : Mother Dairy (Gandhinagar).
20) Project: Butter Milk Sterilization plant
Client : Bhole Baba Dairy (Delhi)
21) Project Name: ARLA BOV.
Client : APV, Denmark.
22) Project Name: MINSK Dairy Plant.
Client : APV, Czech Republic
23) Project Name: Rubber Chemical Plant
Client : PMC Group, Culcutta (Risara)
24) Project Name: NICOMAT – Nickel Plant.
Client : NICOMAT - Goa.
25) Project Name: Bayer-USA.
Client : Siemens Kalwa
26) Project Name: DAS Solid fire Boiler (Forbesvyncke- ForbesMarshall)
Client : Lanxess India pvt. Ltd.
Site : Jhagadia. Gujrat
Professional Experience:
Job
No
Job Title Company Name From To
1. Sr. Project Engineer
Forbesvyncke Pvt.Ltd.
(Forbes Marshall)
3-2011 Till Date
2. Sr. Project Engineer
PROTECH Automation
Pvt.Ltd.
6-2010 3-2011
3. Sr.Project Engineer
Microverse Automation
Pvt.Ltd.(Pune)
6-2009 6-2010
5. Curriculum Vitae
4. Project Engineer
SARLA Technologies (Navi
Mumbai)
10-2007 5-2009
5. Project Engineer
COTMAC Electronics Pvt. Ltd
Pune
6-2004 10-2007
Academics:
EXAMINATION BOARD/UNIVE
RSITY
PASSING
YEAR
CLASS
B.E.E&TC Pune University 2004 Higher Second
Class
HSC Pune University 1999 Distinction
SSC Pune University 1997 Distinction
Company Details:
6. Curriculum Vitae
Current
Organization:
Duration:
Designation:
Job Profile:
M/s FORBESVYNCKE PRIVATE LIMITED
Manufacturing and supplying turnkey automated boilers
based on SIEMENS platform. Using Vyncke(Belgium)
technology
15
th
March 2011 To Till date.
Sr. Project Engineer.
Job includes the following profile.
Individually handling turnkey boiler projects related
with automation, electrical and instrumentation work
( 15 projects in 5.5 years of ForbesMarshall)
Planning of team work for different boiler projects
12years in Industrial Automation, electrical and
instrumentation field.
Understanding P&ID for instrument placement on
field, all instrument field connections and running it
online.
Calibration and testing of SIEMENS and ABB
transmitters, modulating and on/off control valves
field connections and testing.
Level sensors, ZSS sensors, linear transducers, R-I
convertors, SIEMENS actuators, Sequential timers,
Air-regulators, pneumatic valves, hydraulic cylinders
field connections and testing
DOL, Star-Delta, RDOL motor connections and
online testing.
Handling spare/material supply system for clients(
PO, OA, Invoice generation and material supply
follow-up
Knowledge of hydraulic, pneumatic system, Bag
filter, ESP, Drives, control valves, Feed pumps,
electric heaters, air compressors
7. Curriculum Vitae
Previous
Organization:
Duration:
Designation:
Job Profile:
M/s PROTECH AUTOMATION PRIVATE LIMITED
Bhosari MIDC, Pune
Protech provide Engineering solutions to the process plants
by the way of configuring the Logic, Operator Interface &
Database on the SIEMENS platform.
1st
June 2010 To 15th
March 2011
Sr. Project Engineer.
Job includes the following profile.
Development of PLC logic & SCADA Development.
Panel testing.
Plant Commissioning.
Previous
Organization:
Duration:
Designation:
Job Profile:
M/s MICROVERSE AUTOMATION PRIVATE LIMITED
Having its own DCS system. Works mainly on turnkey
projects. Also Works on Siemens Projects. Provide
Engineering solutions to the process plants by the way of
configuring the Logic, Operator Interface & Database on the
SIEMENS platform.
1
st
June 2009 To 31st May 2010
Sr. Project Engineer.
Job includes the following profile.
Development of PLC logic & SCADA Development.
Panel testing.
Plant Commissioning.
8. Curriculum Vitae
Training course:
Honeywell : – PLC, DCS, and SCADA Course
GPP Pune : – PLC, DCS, and SCADA Course
Previous
Organization:
Duration:
Designation:
Job Profile:
M/s SARLA TECHNOLOGIES
Bldg.No.2, Millennium Business Park, Mahape.
Navi Mumbai.
SARLA is a part of Pidilite group. Mainly focus on
International (PLC, DCS) Projects. Provide Engineering
solutions to the process plants by the way of configuring the
Logic, Operator Interface & Database on the SIEMENS
platform.
1st
October 2007 To 31st
May 2009.
Software Engineer.
Job includes the following profile.
Development of PLC logic & SCADA Development.
Panel testing.
Plant Commissioning.
Previous
Organization:
Duration:
Designation:
Job Profile:
M/s COTMAC ELECTRONICS Pvt. Ltd.
S-168 Block, MIDC Bhosari,
Pune.
CEPL is Authorized System House& Service center of
SIEMENS.
6th June 2004 To 30
th
September 2007.
Software Engineer.
Job includes the following profile.
Development of PLC logic & SCADA Development.
Panel testing.
Plant Commissioning.
9. Curriculum Vitae
Personal Details:
Nationality : Indian
Birth Date : 16th July 1982
Languages Known : English, Marathi, and Hindi
Marital Status : Married
Passport No : F9705894
I hereby declare that the information given above is true to the best of my
knowledge.
Date:
Place: Pune
Signature
(Amol V. Buttepatil)