This document provides a summary of Ashkan Aghaei's professional experience and qualifications. It includes details of his various roles as an electrical/control systems engineer and application & solution engineer between 2006-2015. It also lists his education qualifications including a Master's degree in Mechatronics Engineering and Bachelor's degrees in Electronics Engineering and as an Electronics Technician. His skills include designing and implementing various industrial automation systems, electrical plans, and working with communication protocols.
Julián Sáez Mateo is an industrial automation engineer with over 15 years of experience in engineering, design, construction supervision, and commissioning of automation projects worldwide. He has extensive skills in industrial automation systems including DCS, PLC, SCADA, and safety systems. He is currently a freelance consultant providing senior engineering services for international petrochemical projects.
Todd Calvert is seeking a position as a senior controls engineer. He has over 25 years of experience programming PLCs, HMIs, and industrial control systems across various industries. His background includes experience with Allen-Bradley, Modicon, Eaton, Omron, Mitsubishi, Siemens, Yaskawa, and Square D control systems. Currently he works as a controls engineer for Honda configuring and troubleshooting their ActivPlant factory software system.
I have spent 7+ years pursuing a career as Sr. Electrical designer. Along with sr. designer, I am departmental representative of ISO 9001:2015 to management representative; I provide technical support to service and sales team.
My specialties:
+ Electrical Design
- Electrical Schematics, Single line Diagram, BOQ Preparation
- Selection of various Electrical component Switchgear, Drive, Motor, PLC, HMI, Comm. Protocol
(Profibus, Profinet, CANbus, CANopen, Ethernet, EtherCAT, ModBUS, Devicenet)
- Selection of various automation sensors
- Selection of power electronic component I.G.B.T, Diode, Thyristor (SCR).
- Transformer Sizing, HT-LT Cable sizing and Estimation
- Voltage Drop calculation, Short circuit Analysis - MELSHORT2
- IEC, UL, NEMA, IEEE Standards understanding
- Electrical Panel CE | Ul Certification Expert
- Prepare or maintain design, testing, or operational records and documentation.
- PLC-ladder logic preparation, SAP-ERP bill of material preparation.
- Preparing Troubleshooting and Maintenance Manual.
- Excellent Understanding of Hydraulic and Pneumatic circuit for Electrical |Automation controlling view
- Tech support to sales and service team
- Costing and Estimation
- Cross functional Co-ordination
- Panel Schedules
+ IOT (Internet of things)
+ Process Improvement
Jahangir Ali Ahmed has over 13 years of experience as an electrical engineer working on various construction projects in Saudi Arabia and India. He has specialized in residential, commercial, industrial, and infrastructure projects. Some of his responsibilities include electrical design, planning, cost estimation, coordination, inspection, and project management. He is proficient in AutoCAD, engineering standards, and has a valid Saudi driving license.
Aravinthan Mahalingam is seeking a new role as a professional electrical engineer. He has a BEng (Hons) in Electrical & Electronic Engineering Technology from the University of Greenwich (UK) and postgraduate qualifications in Industrial Automation. He has over 10 years of experience in maintenance engineering roles in the UK and Sri Lanka, where he maintained packaging machinery and electrical systems. His skills include programming PLCs, SCADA, DCS, and HMI systems. He is fluent in English and Tamil.
Mehtab Niazi is an electrical engineer with over 10 years of experience designing, installing, and maintaining electrical systems. He has extensive experience managing electrical projects from conception to completion, including for oil and gas facilities. Niazi is proficient in AutoCAD, Microsoft Office, and electrical system software. He aims to deliver projects on time and on budget while ensuring safety, quality, and sustainability.
Arun Das is a mechanical engineer with 9 years of experience in MEP project engineering, execution, management, and design. He is seeking new assignments, preferably in construction or facilities management. He has experience managing MEP installation, testing, and commissioning projects in various building types. Arun Das also has experience in facility operations and maintenance.
Rajnikant Ramoliya is an electrical control engineer with over 5 years of experience in electrical and control system design for residential, commercial, and industrial projects, including experience programming PLCs, designing control panels and electrical distribution systems, and working with automation equipment like Allen Bradley PLCs and VFD drives. He has a Master's degree in Electrical Engineering from Cleveland State University and is seeking to obtain his FE and PE certification. His technical skills include AutoCAD, ETAP, RSLogix 5000, FactoryTalk View, electrical codes and regulations, and he has experience designing and executing projects for commercial buildings, industrial automation, and residential high-rise
Julián Sáez Mateo is an industrial automation engineer with over 15 years of experience in engineering, design, construction supervision, and commissioning of automation projects worldwide. He has extensive skills in industrial automation systems including DCS, PLC, SCADA, and safety systems. He is currently a freelance consultant providing senior engineering services for international petrochemical projects.
Todd Calvert is seeking a position as a senior controls engineer. He has over 25 years of experience programming PLCs, HMIs, and industrial control systems across various industries. His background includes experience with Allen-Bradley, Modicon, Eaton, Omron, Mitsubishi, Siemens, Yaskawa, and Square D control systems. Currently he works as a controls engineer for Honda configuring and troubleshooting their ActivPlant factory software system.
I have spent 7+ years pursuing a career as Sr. Electrical designer. Along with sr. designer, I am departmental representative of ISO 9001:2015 to management representative; I provide technical support to service and sales team.
My specialties:
+ Electrical Design
- Electrical Schematics, Single line Diagram, BOQ Preparation
- Selection of various Electrical component Switchgear, Drive, Motor, PLC, HMI, Comm. Protocol
(Profibus, Profinet, CANbus, CANopen, Ethernet, EtherCAT, ModBUS, Devicenet)
- Selection of various automation sensors
- Selection of power electronic component I.G.B.T, Diode, Thyristor (SCR).
- Transformer Sizing, HT-LT Cable sizing and Estimation
- Voltage Drop calculation, Short circuit Analysis - MELSHORT2
- IEC, UL, NEMA, IEEE Standards understanding
- Electrical Panel CE | Ul Certification Expert
- Prepare or maintain design, testing, or operational records and documentation.
- PLC-ladder logic preparation, SAP-ERP bill of material preparation.
- Preparing Troubleshooting and Maintenance Manual.
- Excellent Understanding of Hydraulic and Pneumatic circuit for Electrical |Automation controlling view
- Tech support to sales and service team
- Costing and Estimation
- Cross functional Co-ordination
- Panel Schedules
+ IOT (Internet of things)
+ Process Improvement
Jahangir Ali Ahmed has over 13 years of experience as an electrical engineer working on various construction projects in Saudi Arabia and India. He has specialized in residential, commercial, industrial, and infrastructure projects. Some of his responsibilities include electrical design, planning, cost estimation, coordination, inspection, and project management. He is proficient in AutoCAD, engineering standards, and has a valid Saudi driving license.
Aravinthan Mahalingam is seeking a new role as a professional electrical engineer. He has a BEng (Hons) in Electrical & Electronic Engineering Technology from the University of Greenwich (UK) and postgraduate qualifications in Industrial Automation. He has over 10 years of experience in maintenance engineering roles in the UK and Sri Lanka, where he maintained packaging machinery and electrical systems. His skills include programming PLCs, SCADA, DCS, and HMI systems. He is fluent in English and Tamil.
Mehtab Niazi is an electrical engineer with over 10 years of experience designing, installing, and maintaining electrical systems. He has extensive experience managing electrical projects from conception to completion, including for oil and gas facilities. Niazi is proficient in AutoCAD, Microsoft Office, and electrical system software. He aims to deliver projects on time and on budget while ensuring safety, quality, and sustainability.
Arun Das is a mechanical engineer with 9 years of experience in MEP project engineering, execution, management, and design. He is seeking new assignments, preferably in construction or facilities management. He has experience managing MEP installation, testing, and commissioning projects in various building types. Arun Das also has experience in facility operations and maintenance.
Rajnikant Ramoliya is an electrical control engineer with over 5 years of experience in electrical and control system design for residential, commercial, and industrial projects, including experience programming PLCs, designing control panels and electrical distribution systems, and working with automation equipment like Allen Bradley PLCs and VFD drives. He has a Master's degree in Electrical Engineering from Cleveland State University and is seeking to obtain his FE and PE certification. His technical skills include AutoCAD, ETAP, RSLogix 5000, FactoryTalk View, electrical codes and regulations, and he has experience designing and executing projects for commercial buildings, industrial automation, and residential high-rise
An Electrical and Instrumentation Engineer with knowledge of developing, maintaining electrical systems and controlling
industrial equipment and instruments focusing on economy, safety, reliability, quality and sustainability. I would like to apply
my knowledge and ideas in the research field of Electrical and Instrumentation Engineering and work with dedication and
punctuality to bring out the best.
Yasir Abdellatif Gismalla has over 10 years of experience in electrical and instrumentation engineering roles in oil and gas, HVAC, and water treatment plants. He has expertise in PLC programming, SCADA system design, control panel design, and facility maintenance planning. Currently he is the Acting Head of Operations and Maintenance at a district cooling plant and sewage treatment plant in Abu Dhabi, where he supervises maintenance activities and ensures smooth plant operations.
This document contains the resume of Vishnu T S, an electrical engineer with experience in power transmission and distribution systems. He has a Bachelor's degree in Electrical and Electronics Engineering with excellent academic performance, as well as a postgraduate diploma in Industrial Automation. His professional experience includes over a year working as a substation operation and maintenance engineer for the Kerala State Electricity Board, where he performed tasks like equipment installation, testing, troubleshooting, and maintenance. He also completed an academic project on transformer health monitoring in intelligent substations. Vishnu has strong computer skills including AutoCAD Electrical and programming languages, and seeks to further his career as an electrical engineer.
Master of Engineering in Power Electronics and Drives. Actively Looking for Job opportunity to work in core domain. Have Industry Experience in Bharat Heavy Plate and Vessels Ltd. Published and presented an IEEE paper on Control of Doubly Fed Induction Generator connected to Variable Speed Wind Turbine in Technological Advancements of Power and Energy at Amritapuri, Kerala
This document provides a summary of Arthit Kliangprom's background and experience. It outlines his education, including a bachelor's degree in electrical engineering, and over 15 years of experience in industrial automation projects across various sectors. His expertise includes programming languages for PLCs and DCS systems from manufacturers such as Siemens, Allen-Bradley, Honeywell, and ABB. He has extensive experience in electrical design, system configuration, testing, and commissioning of large automation projects.
Adil Abdulla is an instrumentation and automation engineer seeking a position that utilizes his skills and experience. He has a bachelor's degree in electronics and instrumentation engineering and over 5 years of experience in supervision, installation, testing and commissioning of instrumentation and control systems. His experience includes projects for pharmaceutical, food and beverage plants as well as oil and gas projects for Saudi Aramco.
Mohamed Rizk Abed El Satar is an electrical engineer from Egypt seeking new opportunities. He has over 15 years of experience in technical support, product management, maintenance engineering, and sales engineering roles. His background includes designing and maintaining low voltage electrical systems, control panels, generators, and scientific instruments. He is proficient in AutoCAD, Microsoft Office, and software for panel design, selectivity studies, and type testing.
Mostafa Kamal Ibrahim is an electrical engineer seeking a job where he can utilize his background and experience. He graduated from Helwan University in 2013 with a degree in electrical engineering, specializing in power and electrical machines. Since 2014, he has worked as an electric design engineer developing panels, distribution systems, and more for various construction projects. He also completed training programs and courses in subjects like PLC programming, automatic control, AutoCAD, and computer skills.
Ayush Agarwal is an instrumentation engineer with over 7 years of experience in process automation and instrumentation projects in the pulp and paper industry. He has extensive experience in commissioning, operation, and maintenance of distributed control systems, programmable logic controllers, and field instruments. He is seeking new challenging assignments that allow him to utilize his expertise in instrumentation, project management, and process optimization.
Wael Mahmoud Sobeih is an electrical engineer with over 15 years of experience in project management, tendering, and electrical design. He currently works as a Tender and Proposal Team Leader for Giza Systems, where he prepares technical and commercial offers for substation and transmission line projects in KSA, Qatar, and Egypt. Previously, he held project management roles with PPT and PSP Elsewedy where he oversaw design, construction, and commissioning of power plants and industrial facilities in the Middle East and Africa. Wael holds a B.Sc. in Electrical Power and Machines Engineering and is pursuing PMP certification.
Hasan provides his curriculum vitae, which outlines his educational background including a bachelor's degree in electronic engineering. It also details his work experience as an electrical and automation engineer for PT. NS BlueScope Indonesia where he has led various projects to improve systems and reduce costs. His skills and experience include electrical, automation, and maintenance work across several industries.
The document provides a summary of an engineer's experience and qualifications. It details his 8 years of experience designing low voltage electrical systems including control panels, switchgears, bus ducts, and more. It also lists his educational qualifications of a Diploma in Electrical Engineering and an MBA in Power Management. Several projects are summarized that involve designing and executing low voltage panels, MCCs, and working as an electrical engineer on incinerator projects.
Mohamed Elwardany is a senior project application engineer at Invensys seeking a mid-level position in automation or embedded control systems. He has over 10 years of experience in industrial automation and oil and gas, including working with companies like ABB Egypt, EAST, and Invensys. He has expertise in systems design, programming, configuration, commissioning, and start-up across various automation platforms like Tricon, 800xA, Siemens PLCs, and SCADA systems.
Electrical engineers develop, design, and update specifications for electrical systems and equipment; design methods to generate, distribute, and manage electricity; and oversee the installation and testing of new systems. They typically work regular business hours but may have irregular hours to meet project deadlines in offices, laboratories, workshops or on-site. A bachelor's degree in engineering is required, and skills in electronics, circuit theory, design, and safety practices are important for success in the career.
Dheeraj Mangole is seeking a challenging role as an electronics engineer with 4 years of experience. He has a B.E. in Electronics Engineering from Mahakal Institute of Technology with over 68% average. His experience includes roles as an electronics service and maintenance engineer at Electrotherm India Limited and Sapthshurni Alloys Pvt Ltd. He has skills in PLC programming, HMI software, industrial networking, electrical systems, and automation and control systems.
Mohammed Ateeq is an electrical engineer with over 5 years of experience in electrical design, testing, and project management in Saudi Arabia. He holds a B.Tech in electrical engineering and is seeking a position where he can utilize his skills in electrical design, planning, and project execution. His experience includes electrical system design for infrastructure projects, water treatment plants, and telecom towers. He has strong skills in electrical load calculation, panel design, cable sizing, and layout preparation.
Paulus Anak Pengara holds various qualifications in mechatronic technology and electrical engineering including a Diploma in Mechatronic Technology from Advanced Technology Training Centre. He has worked as a Technician for Malaysia LNG since 2009 where he performs preventative and corrective maintenance on low voltage electrical systems and equipment. Paulus has extensive experience testing and troubleshooting electrical equipment, overhauling motors, and leading projects with contractors. He is proficient in Microsoft Office, SAP, and safety procedures.
Shakkeer K is seeking a position that allows him to utilize his 6 years of experience in electrical engineering and maintenance. He has a B.E. in Electrical and Electronics Engineering and experience working as a SCADA engineer for ABB India and currently works as an electrical engineer for maintenance at Masar Printing & Publishing in Dubai. His experience includes working with SCADA, PLC, and automation systems, communication protocols, and electrical maintenance.
Ahmed Elmagzoub is an electrical protection engineer seeking a position in renewable energy with a focus on solar photovoltaic systems and protection. He has a Master's degree in Electrical Power Engineering and experience in testing and commissioning, operations, and maintenance. His skills include power system analysis, distributed generation, solar PV systems, programming, and engineering software like SIEMENS PSS®E and MATLAB.
Syed Ali Raza is seeking a position to enhance his skills and knowledge. He has a BE in electrical engineering from Hamdard University and experience as an engineer in maintenance at ProconEngineering. His responsibilities there include scheduling preventive maintenance, overseeing projects, and enforcing safety regulations. He also held a trainee engineering role at ProconEngineering focused on troubleshooting, production processes, and maintaining documentation. Raza has completed internships at the Civil Aviation Authority and Pakistan Steel Mills working in control rooms, laboratories, and electrical departments. His skills include PLC programming, electrical machines, power electronics, and communication systems.
Avi Jain has over 3 years of experience in IT with expertise in database administration, software development, big data analytics, and virtualization. He has worked extensively with Oracle, MySQL, MongoDB, and other databases. Notable projects include developing a music recommendation engine using Mahout on Hadoop, building a distributed service using Zookeeper, and designing virtual machine disaster recovery and power management systems on VMware. Avi holds an MS in Software Engineering from San Jose State University and seeks new opportunities as a database administrator or big data engineer.
Hossam El-Din Hassan Kishk is an experienced network engineer seeking a new career opportunity. He has over 15 years of experience implementing and supporting networks for various companies. He is proficient in Cisco routers, switches, firewalls, and wireless technologies. He also has experience administering Microsoft servers and Linux systems. Kishk holds a B.Sc. in Electronics and Telecommunications Engineering and is Cisco CCNA and CCNP certified.
An Electrical and Instrumentation Engineer with knowledge of developing, maintaining electrical systems and controlling
industrial equipment and instruments focusing on economy, safety, reliability, quality and sustainability. I would like to apply
my knowledge and ideas in the research field of Electrical and Instrumentation Engineering and work with dedication and
punctuality to bring out the best.
Yasir Abdellatif Gismalla has over 10 years of experience in electrical and instrumentation engineering roles in oil and gas, HVAC, and water treatment plants. He has expertise in PLC programming, SCADA system design, control panel design, and facility maintenance planning. Currently he is the Acting Head of Operations and Maintenance at a district cooling plant and sewage treatment plant in Abu Dhabi, where he supervises maintenance activities and ensures smooth plant operations.
This document contains the resume of Vishnu T S, an electrical engineer with experience in power transmission and distribution systems. He has a Bachelor's degree in Electrical and Electronics Engineering with excellent academic performance, as well as a postgraduate diploma in Industrial Automation. His professional experience includes over a year working as a substation operation and maintenance engineer for the Kerala State Electricity Board, where he performed tasks like equipment installation, testing, troubleshooting, and maintenance. He also completed an academic project on transformer health monitoring in intelligent substations. Vishnu has strong computer skills including AutoCAD Electrical and programming languages, and seeks to further his career as an electrical engineer.
Master of Engineering in Power Electronics and Drives. Actively Looking for Job opportunity to work in core domain. Have Industry Experience in Bharat Heavy Plate and Vessels Ltd. Published and presented an IEEE paper on Control of Doubly Fed Induction Generator connected to Variable Speed Wind Turbine in Technological Advancements of Power and Energy at Amritapuri, Kerala
This document provides a summary of Arthit Kliangprom's background and experience. It outlines his education, including a bachelor's degree in electrical engineering, and over 15 years of experience in industrial automation projects across various sectors. His expertise includes programming languages for PLCs and DCS systems from manufacturers such as Siemens, Allen-Bradley, Honeywell, and ABB. He has extensive experience in electrical design, system configuration, testing, and commissioning of large automation projects.
Adil Abdulla is an instrumentation and automation engineer seeking a position that utilizes his skills and experience. He has a bachelor's degree in electronics and instrumentation engineering and over 5 years of experience in supervision, installation, testing and commissioning of instrumentation and control systems. His experience includes projects for pharmaceutical, food and beverage plants as well as oil and gas projects for Saudi Aramco.
Mohamed Rizk Abed El Satar is an electrical engineer from Egypt seeking new opportunities. He has over 15 years of experience in technical support, product management, maintenance engineering, and sales engineering roles. His background includes designing and maintaining low voltage electrical systems, control panels, generators, and scientific instruments. He is proficient in AutoCAD, Microsoft Office, and software for panel design, selectivity studies, and type testing.
Mostafa Kamal Ibrahim is an electrical engineer seeking a job where he can utilize his background and experience. He graduated from Helwan University in 2013 with a degree in electrical engineering, specializing in power and electrical machines. Since 2014, he has worked as an electric design engineer developing panels, distribution systems, and more for various construction projects. He also completed training programs and courses in subjects like PLC programming, automatic control, AutoCAD, and computer skills.
Ayush Agarwal is an instrumentation engineer with over 7 years of experience in process automation and instrumentation projects in the pulp and paper industry. He has extensive experience in commissioning, operation, and maintenance of distributed control systems, programmable logic controllers, and field instruments. He is seeking new challenging assignments that allow him to utilize his expertise in instrumentation, project management, and process optimization.
Wael Mahmoud Sobeih is an electrical engineer with over 15 years of experience in project management, tendering, and electrical design. He currently works as a Tender and Proposal Team Leader for Giza Systems, where he prepares technical and commercial offers for substation and transmission line projects in KSA, Qatar, and Egypt. Previously, he held project management roles with PPT and PSP Elsewedy where he oversaw design, construction, and commissioning of power plants and industrial facilities in the Middle East and Africa. Wael holds a B.Sc. in Electrical Power and Machines Engineering and is pursuing PMP certification.
Hasan provides his curriculum vitae, which outlines his educational background including a bachelor's degree in electronic engineering. It also details his work experience as an electrical and automation engineer for PT. NS BlueScope Indonesia where he has led various projects to improve systems and reduce costs. His skills and experience include electrical, automation, and maintenance work across several industries.
The document provides a summary of an engineer's experience and qualifications. It details his 8 years of experience designing low voltage electrical systems including control panels, switchgears, bus ducts, and more. It also lists his educational qualifications of a Diploma in Electrical Engineering and an MBA in Power Management. Several projects are summarized that involve designing and executing low voltage panels, MCCs, and working as an electrical engineer on incinerator projects.
Mohamed Elwardany is a senior project application engineer at Invensys seeking a mid-level position in automation or embedded control systems. He has over 10 years of experience in industrial automation and oil and gas, including working with companies like ABB Egypt, EAST, and Invensys. He has expertise in systems design, programming, configuration, commissioning, and start-up across various automation platforms like Tricon, 800xA, Siemens PLCs, and SCADA systems.
Electrical engineers develop, design, and update specifications for electrical systems and equipment; design methods to generate, distribute, and manage electricity; and oversee the installation and testing of new systems. They typically work regular business hours but may have irregular hours to meet project deadlines in offices, laboratories, workshops or on-site. A bachelor's degree in engineering is required, and skills in electronics, circuit theory, design, and safety practices are important for success in the career.
Dheeraj Mangole is seeking a challenging role as an electronics engineer with 4 years of experience. He has a B.E. in Electronics Engineering from Mahakal Institute of Technology with over 68% average. His experience includes roles as an electronics service and maintenance engineer at Electrotherm India Limited and Sapthshurni Alloys Pvt Ltd. He has skills in PLC programming, HMI software, industrial networking, electrical systems, and automation and control systems.
Mohammed Ateeq is an electrical engineer with over 5 years of experience in electrical design, testing, and project management in Saudi Arabia. He holds a B.Tech in electrical engineering and is seeking a position where he can utilize his skills in electrical design, planning, and project execution. His experience includes electrical system design for infrastructure projects, water treatment plants, and telecom towers. He has strong skills in electrical load calculation, panel design, cable sizing, and layout preparation.
Paulus Anak Pengara holds various qualifications in mechatronic technology and electrical engineering including a Diploma in Mechatronic Technology from Advanced Technology Training Centre. He has worked as a Technician for Malaysia LNG since 2009 where he performs preventative and corrective maintenance on low voltage electrical systems and equipment. Paulus has extensive experience testing and troubleshooting electrical equipment, overhauling motors, and leading projects with contractors. He is proficient in Microsoft Office, SAP, and safety procedures.
Shakkeer K is seeking a position that allows him to utilize his 6 years of experience in electrical engineering and maintenance. He has a B.E. in Electrical and Electronics Engineering and experience working as a SCADA engineer for ABB India and currently works as an electrical engineer for maintenance at Masar Printing & Publishing in Dubai. His experience includes working with SCADA, PLC, and automation systems, communication protocols, and electrical maintenance.
Ahmed Elmagzoub is an electrical protection engineer seeking a position in renewable energy with a focus on solar photovoltaic systems and protection. He has a Master's degree in Electrical Power Engineering and experience in testing and commissioning, operations, and maintenance. His skills include power system analysis, distributed generation, solar PV systems, programming, and engineering software like SIEMENS PSS®E and MATLAB.
Syed Ali Raza is seeking a position to enhance his skills and knowledge. He has a BE in electrical engineering from Hamdard University and experience as an engineer in maintenance at ProconEngineering. His responsibilities there include scheduling preventive maintenance, overseeing projects, and enforcing safety regulations. He also held a trainee engineering role at ProconEngineering focused on troubleshooting, production processes, and maintaining documentation. Raza has completed internships at the Civil Aviation Authority and Pakistan Steel Mills working in control rooms, laboratories, and electrical departments. His skills include PLC programming, electrical machines, power electronics, and communication systems.
Avi Jain has over 3 years of experience in IT with expertise in database administration, software development, big data analytics, and virtualization. He has worked extensively with Oracle, MySQL, MongoDB, and other databases. Notable projects include developing a music recommendation engine using Mahout on Hadoop, building a distributed service using Zookeeper, and designing virtual machine disaster recovery and power management systems on VMware. Avi holds an MS in Software Engineering from San Jose State University and seeks new opportunities as a database administrator or big data engineer.
Hossam El-Din Hassan Kishk is an experienced network engineer seeking a new career opportunity. He has over 15 years of experience implementing and supporting networks for various companies. He is proficient in Cisco routers, switches, firewalls, and wireless technologies. He also has experience administering Microsoft servers and Linux systems. Kishk holds a B.Sc. in Electronics and Telecommunications Engineering and is Cisco CCNA and CCNP certified.
Carry Chu has over 10 years of experience in customer service, sales, event planning, and administrative roles. She has a Bachelor's degree in Hospitality and Tourism Management from Ryerson University. Her skills include proficiency in Microsoft Office, travel industry software, and strong organization, communication, and problem-solving abilities. She is fluent in Mandarin and has several travel industry certifications.
This document is a resume for Melanie Yakemovic, who is seeking an entry-level physical therapy position focused on acute care. She has a Doctor of Physical Therapy degree from Rocky Mountain University of Health Professions and a B.A. in Neuroscience from Agnes Scott College. Her experience includes clinical externships in both inpatient and outpatient settings. She also has experience teaching various skills like snowboarding, ceramics, swimming, and martial arts.
Sachin P has over 10 years of experience in telecom consulting, business analysis, testing, and product implementation. He currently works as a senior business analyst for CGI in telecom. He has extensive experience in requirements gathering, functional specifications, product customization, testing, and issue resolution for telecom operators. He is certified in project management, software testing, and several telecom frameworks.
Rajib Mishra has over 5 years of experience as a MicroStrategy developer, architect, and administrator building reports, dashboards, and designing BI solutions. He has extensive experience migrating reports from tools like Cognos and OBIEE to MicroStrategy. Rajib has worked on projects in various domains for clients such as AmBank, Keysight Technologies, GE Energy, and Tata Consultancy Services, focusing on requirements gathering, data modeling, report development, and testing.
The document is an application by Noor Mohammed for an electrical estimator or designer position. In his 17 years of experience, he has worked on electrical designs, cost estimations, and CAD drawings for projects in aluminum smelters, substations, power plants, oil and gas facilities, and other industrial and commercial buildings. Currently he works as an electrical CAD designer and coordinator at Qatar Aluminum, where his responsibilities include modification projects, cost estimation, and technical support activities. He holds degrees in electrical engineering and has extensive experience with software such as AutoCAD, MicroStation, and SAP.
Bharath Kumar Reddy is an instrumentation engineer with over 6 years of experience in the cement industry. He has worked on projects in India and West Africa. Some of his responsibilities have included instrumentation engineering, project planning, maintenance, automation systems, and overseeing all project activities from conceptualization to execution. He is proficient with several automation systems including Siemens, ABB, and Allen-Bradley PLCs and DCS. Currently he works for Sutek Systems India as an instrumentation engineer.
This resume is for Ayman Ali, an Egyptian electrical engineer seeking a job as an electrical engineer. He has a Bachelor's degree in computer science and engineering from Menoufia University in Egypt. His relevant work experience includes over 5 years working on electrical construction projects in Saudi Arabia and over a year of experience in mobile communication engineering in Egypt and Saudi Arabia working with Vodafone and Etisalat networks. He has skills in AutoCAD, Revit, electrical system design, mobile network installation and maintenance.
This document provides a summary of S M Umer Wasi's professional experience and qualifications. He has over 8 years of experience working for SUPARCO leading, controlling, and monitoring electronics equipment. He is skilled in PLCs, sensors, CNC machines, and various other electronics systems. His responsibilities include maintenance, troubleshooting, and overseeing projects. He has expertise in PLC programming, microcontroller programming, circuit design, and various software programs. He has a Bachelor's degree in Electronics Engineering and additional technical courses and certifications.
Akhileshwar Nath Singh is seeking a career that utilizes his 5 years of experience in electrical and industrial automation projects. He currently works as a Design & Testing Engineer at Mettler Toledo India Pvt Ltd, where he is responsible for planning, designing, and implementing electrical systems and automation for automated machinery. He has expertise in PLC programming, electrical schematic design, control panel design, hazardous area applications, and industrial automation. He has worked on projects for clients like Nestle, DRL, Cadbury, Lanxess, ITC, and others.
The document provides a summary of S M Umer Wasi's professional experience and qualifications. He has over 8 years of experience in automation and electronics maintenance and projects. His responsibilities have included troubleshooting equipment issues, managing maintenance jobs, and designing electronics systems. He has skills in PLC programming, microcontroller programming, circuit design, and software like Arduino, Altium, and PLC programming software. He has a Bachelor's degree in Electronics Engineering and technical courses in industrial controls, PCB design, microcontroller programming, and website development. Past projects include a digital clock, AC chiller plant control system, and UPS systems.
B.tech electronics 4.5 years of experinceRavneet Sodhi
Electronics and Communication Engineer, with over 4.5 years of experience in handling operation of all Telecom Energy Products that includes Hardware Designing, Testing , Installation & commissioning of Telecom Energy Products,RenewableEnergy Source (solar) Network Operation Center. Proactive team player, enthusiastic to learn & grow with new challenges.
Mohamad Chaaban has over 15 years of experience in electrical engineering and IT roles. He is currently seeking new challenges that allow him to effectively utilize his experience. His resume highlights experience as an electrical site engineer overseeing 1240 villa projects in Dubai. He also has experience in IT roles such as system administrator, service desk analyst, and engineer where he supported IT operations and provided technical support. Chaaban has a Bachelor's degree in electrical engineering and various IT-related certifications.
Islam Reda Mustafa Azkoul is an electrical maintenance and installation manager with over 12 years of experience in Egypt. He has a B.Sc. in electrical power and machines from Mansoura University. Currently he is the maintenance manager at AL-Teria Factory in Giza, Egypt, where he oversees electrical, mechanical, and utilities maintenance and leads projects. Previously he held electrical engineering roles at several paper mills and tissue factories in Egypt. He has skills in PLC programming, HMI programming, drives installation, and automation systems.
Khubaib Khan is an instrumentation engineer with over 10 years of experience working in fertilizer and power plants. He has expertise in DCS/PLC systems including Yokogawa Centum CS 3000 and GE Fanuc Rx3i PLC. Khan is currently an instrumentation area engineer responsible for maintenance, troubleshooting, and projects involving gas turbines, HRSGs, nitric acid plants, and CDM projects. He has received awards for his maintenance excellence and safety initiatives.
This document provides a summary of Pramod Patil's career experience and qualifications. He has over 27 years of experience in project management and product development in fields including wind energy, solar energy, industrial automation, and power electronics. Some of his roles include vice president of R&D and engineering at PowerWind Ltd, and assistant general manager in the technology services group at Suzlon Energy Ltd. He has a postgraduate diploma in marketing management and an M.Sc. in electronics with a specialization in microprocessor-based instrumentation and control systems.
1. Muhammad Haris Ali is seeking a position in a well-reputed organization where he can utilize his skills and experience in project management, instrumentation, electrical engineering, and team leadership.
2. He has over 5 years of experience working as a business development manager, instrumentation sales engineer, and application and commissioning engineer for various companies in Pakistan.
3. His experience includes designing and implementing instrumentation and control solutions, managing projects, developing proposals, and commissioning systems for flow, level, temperature, pressure, weight, and more.
Ahmed Almashhadani is a senior-level technology professional with over 20 years of experience in electrical and telecommunication technologies. He has expertise in areas such as computer skills, fiber optic systems installation, power systems, security and electrical construction, and mechanical fabrication. Mr. Almashhadani holds an Associate's degree in Drafting and Design and a Bachelor's degree in Electrical Engineering. He has worked on engineering and design projects, fiber optic installation, and served as an electrical engineer on hospital, infrastructure, and industrial projects.
Sathish Kumar is an electrical engineer with over 10 years of experience in design, engineering, operations and maintenance of power plants. He has expertise in electrical systems design, modeling load flow and short circuit analysis, substation layout, and coordinating projects. His career includes roles with engineering and construction companies in Kuwait where he contributed to projects within time and quality standards. Sathish Kumar holds a B.E. in Electrical and Electronics Engineering and is seeking a senior role in design, engineering or operations for an oil, gas, power or EPC organization.
The document contains Ahmed Jassim Mohammed's personal and professional details. It summarizes his education in electromechanical engineering and over 7 years of work experience in installation, commissioning, and maintenance roles for companies like KHS, Coca-Cola, and Huawei in Iraq and Afghanistan. His responsibilities involved electrical wiring, PLC programming, troubleshooting machinery issues, and training personnel. He has technical skills in PLCs, Step-7 programming, sensors, and computer programs.
Samuel Jaideep Kumar Joseph has over 15 years of experience in commissioning, integration, maintenance and troubleshooting of RTU and SCADA systems. He currently works as a Program Management Engineer for Detecon Al Saudia Co. Ltd. in Saudi Arabia, where he manages project teams and reports. Previously, he worked as a Senior Project Lead in India commissioning energy metering, substation monitoring and industrial automation systems. He has expertise in hardware design, PLC programming, and protocol-based communication systems.
Ritesh Pali is seeking a position that utilizes his technical skills and experience in electrical engineering. He has a BE in Electrical Engineering from AISSM's IOIT in Pune and over 3.5 years of experience. His experience includes roles as an application and service engineer at SAKSUN Industries, service engineer at AB Power Solutions, and electrical supervisor at ASIAN Power. He has skills in PLCs, SCADA, control panels, motors, power cables, and substation work. He completed projects on internet-based pump control and a prepaid energy meter.
Avinash H is an electronics and communications engineer with over 10 years of experience in project management, execution, installation and commissioning of industrial automation projects. He has extensive experience programming PLCs from Allen Bradley, Siemens and Omron, as well as developing HMI/SCADA interfaces using WinCC, Intouch and other software. Currently working as an application and design engineer for BFL Hydro, he is responsible for engineering, designing and developing automation applications for hydroelectric power plants.
This document is a curriculum vitae for an electrical engineer named Khaja Kalim Ahmmad Shaik. It summarizes his 8 years of experience in electrical engineering projects in Saudi Arabia. It details his most recent role as an electrical engineer for Advanced Vision Electro Mechanical Company, where he oversees electrical design, supervision, testing and commissioning for projects like Princess Norah University. It also lists his education and technical skills.
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEMHODECEDSIET
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024Sinan KOZAK
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
1. 1
A S H K A N A G H A E I
Tel: +61-431133663
E-Mail: aghaeiashkan@gmail.com
Address: 488 Torrens Road, Woodville North, Adelaide, South Australia - Australia
PERSONAL INFORMATION
Car is available Driving license holder Permanent resident
PROFESSIONAL EXPERIENCE
ADICO Company, Tehran – Iran, www.adico.co, [ Sep. 2014 – July 2015], Fulltime, Position: Electrical/Control Systems Engineer
Designing and implementing of ESD and DCS systems with YOKOGAWA, SIEMENS and so on
Instrumentation consultation for sales department
Teaching some general courses in instrumentation and industrial automation and common standards in oil and gas industry
Upgrading and optimizing in ESD (Moore), FGS (Moore) and DCS (YOKOGAWA) systems of Soroush and Norouz oil platforms (establish
redundancy in network via redundant Mulocm and changing M-Net network to Ethernet TCP/IP by using IEM)
Designing and implementing of industrial automation system in Jetty P3 for Arvand petrochemical (SIEMENS Faille safe system)
SENSYS Company, Tehran – Iran, www.sensys.co , [ 28 Sep. 2013 – 31 August 2014 ], Fulltime, Position : Application & Solution Engineer
Designing and implementing of various industrial automation systems such as PIMS (Plant Information Management System), MES (Manufacturing
Execution System), EMS (Energy Management System), OEE (Overall Equipment Effectiveness) , EMI (Enterprise Manufacturing Intelligence) , DCS,
SCADA, GeoSCADA and the like
Installing and commissioning of Cisco Firewall switch
Holding training sessions about IntelliMAX software and some other courses about automation and industrial network
Installing and commissioning of new industrial automation system for saving energy
Installing and commissioning of various industrial automation system in different plant such as 7 cement and steel plants.
Implementing of new system for production planning
Making connection between industrial automation system with ERP system and QC devices.
Making connection and designing in various HMI software such as WinCC, Compact ABB and the like.
Having dynamic and creative activities in international environment and communicate with experts in other countries on a daily basis
Working with different OPC DA and OPC UA
Familiar with process of diverse industrial process such as production of cement and cool and warm milling
Designing and implementing of new maintenance system for preventing early maintenance.
Designing and implementing of new modules which are related to QC concepts.
Working with variety of industrial communication protocols such as modbus, Ethernet TCP/IP, Profibus and so on.
Making connection with wide variety of PLCs including Siemens, Yokogawa, Omron, Honeywell, Allen-Bradley, ABB, Schneider,
Emerson DeltaV and the like.
Working with different GSM modems
Working and making connection with various industrial meters and energy meters.
Improving the performance of factories and organization with designing and implementing novel industrial automation systems.
Sepanoo Company, Isfahan – Iran, [ 27 Aug. 2010 – 27 Sep. 2013], Fulltime, Position : Electrical/Control Systems Engineer
Designing and implementing of various automation systems
with the help of PLC and HMI
Designing and implementing of various types project with
microcontrollers and DSP ICs
Supervising on daily work of workshop and solving technical
relevant problems
Initial and final testing, commissioning and operating of
various electrical panels
Designing and implementing BMS (Building Management
System) system.
Holding some technical training sessions
Designing and manufacturing of oil and gas sensors
Installing and calibrating of electromotor drivers
Supervising on installation of lighting, communication, fire
alarm, paging, CCTV systems.
Working with variety of industrial communication protocols
Setting up and calibrating of instruments, actuators and sensors
Designing electrical and mechanical drawings for various
projects
Designing and implementing of multidisciplinary projects in the
fields of electrical, mechanical and software
NICC Company, Isfahan steel company– Iran ,http://www.nicc-co.com, [21 Mar. 2009 – 26 Aug. 2010], Fulltime, Position: Electrical/Control
Systems Engineer
Preparing required table and graph for the total project
process and forecasting front-work and materials
Supervising on initial and final testing and operating of
transformators 10KV/400 V
Testing and operating electro motors, such as conveyor,
pumps, blower, HVAC etc.
Supervising on grounding system and anti-thunderbolt system
installation
Supervising on installation of lighting, communication, fire
alarm, paging and CCTV equipment
Supervising on initial and final testing and operating of
various electrical panels, including MCC (Motor Control
Center), MPP, PDB, LCP, LP etc.
Checking monthly status reports of subcontractors and
preparing status reports for NICC
Designing initial and as-built plans with using AutoCAD
software
Dominating completely with P&ID plans and piping elements
Familiar with all the electrical industrial materials
Installing and calibrating electromotor drivers
Setting up and calibrating instruments
Preparing cabling graphs and cable cutting sheet
Preparing punch list before the final operation
Preparing test package
Holding technical training session for new workforce and
teaching some
Supervising on daily work of workshop and solving technical
relevant problems
Performing OPC (Opening Package and Checking) and material
balance
Kalar technical services company, Isfahan - Iran, [ 23 Sep. 2006 – 29 Dec.2008 ], Part time, Position: Electrical Technician
Designing and implementing lighting systems
Designing and implementing fire alarm systems
Wiring of homes and businesses places
Installing electrical panels
Installing electrical equipment of small pomp house
Executing earthing system for homes and businesses places
EDUCATION
● MS Mechatronics Engineering, Score: High Disyicition, Semnan University- Iran, http://www.semnan.ac.ir, [22 Sep. 2010 – 27 Jan. 2013]
2. 2
● BS Electronics Engineering, Score: Distinction , Nouri University - Iran, http://www.mohaddes.ac.ir, [22 Sep. 2004 – 22 Jun. 2006]
● Electronics Technician, Average Degree: Distinction, Jahad University – Iran, http://www.jdiut.ac.ir, [23 Sep. 2002 - 21 Jun. 2004]
SKILLS
Designing and Implementing of various industrial automation systems
with SIEMENS and YOKOGAWA
Designing and implementing various industrial automation systems such as
PIMS, MES, EMS, OEE, EMI, DCS, SCADA, GeoSCADA, ESD and the like
Designing and implementing of microcontroller and DSP systems
Working with variety of industrial communication protocols such as modbus,
Industrial Ethernet, Profibus, M-NET, M-Bus and the like
Familiar with electrical plan, plan calculations and design as-built plans
Working with OPC UA and DA
Hydraulic and pneumatic systems
Designing and implementing analog systems
Set up and calibrating variety of instruments
Material balancing
Renovation of old industries
Familiar with P&ID plans and piping elements
Design PCB
Artificial intelligence
Neural networks
Real-time systems
Machine vision
Fuzzy control
Robotics
Image processing
Checking and triggering electrical equipment like electro motors, MCC (Motor Control Center), MPP ,PDB ,LCP ,LP etc. and some kind of
Instruments, switches and sensors, communication systems, lighting, fire alarming, paging, CCTV, earthing and anti-thunderbolt system
Expertise in: Matlab, Altium designer, Codevision, Bascome, Proteus, Office Word, Access, Excel and Power point, Programming language: Pascal,
C++, Code composer studio, Simatic Manager, Wincc, DOP Soft, Worldpress, CorelDraw, LaTex, IntelliMAX, KEPware, XL Reporter, Ignition, Putty,
Uagateway, 4Mation (Quadlog moore)
Familiar with Lab view, Orcad, Franklin, Photoshop, AutoCAD, Inventor
RECEIVED AWARDS AND PATENTS
● IEEE reviewer of some events such as ISIEA 2012, ICCSII 2012, ICEDSA, CyberC-2012 and IEEE Transactions on Control Systems Technology
journal, located in the U.S.
● Publishing a book titled: COA fuzzy intelligent control systems, ISBN 978-974-377-718-0, Autumn 2014
● Design and implementation of Azadi controller with DSP in laboratory plants (Final M.S dissertation), Spring, Summer and Autumn 2012
● Design and implementation of Azadi analog controller in laboratory plants, Summer 2013
● Publishing an ISI paper titled: Comparing Azadi Controller with Several Optimal Controllers, in Journal of Basic and Applied Scientific Research,
Vol. 2, No. 2, Page 792-801, ISSN 2090-4304, Feb. 2013
● Publishing a paper titled: Optimizing Azadi Controller with COA in international journal of computer applications (IJCA), Vol. 61, Issue 8, Page 22-
26, ISSN 0975 – 8887, DOI: 10.5120/9949-4594, published in Harvard university and NASA website (adsabs.harvard.edu/abs/2013IJCA...61h..22A)
and it is sited in many papers such as 2 ISI papers, Jan. 2013
● Publishing a paper titled: Optimizing Fuzzy Logic Controller with COA, in International Journal of Enhanced Research in Science, Technology &
Engineering, Vol. 3, Issue 12, Page 1-10, impact factor 1.252, ISSN 2319-7463, Dec. 2014
● Preparing a paper titled: Genetic fuzzy controller for tank fluid level with regard to optimum performance in the presence of disturbance, July 2012
● Preparing a paper titled: Investigating performance of PV– hydrogen storage system for a house, April. 2013
● Preparing a paper titled: Introducing Cuckoo Fuzzy System (CFS), April. 2013
● Preparing a paper titled: Introducing Cuckoo Azadi System (CAS), April. 2013
● Preparing a paper titled: Implementing Azadi Controller with DSP case of study generator voltage controlling, April. 2013
● Preparing a paper titled: Implementing Azadi Controller with DSP case of study heat chamber, April. 2013
● Preparing a research titled: Trajectory planning Optimization for two-link and three-link robot with using genetic algorithm in the presence of
obstacles, Aug 2012
● Preparing a research titled: Farsi number OCR with MLP neural network, Nov. 2010
● Preparing Azadi controller toolbox in MATLAB software, Apr. 2012
● 951 Rank in an exam to MS degree, Mar. 2010
● First prize winner in 1st convocation of Electronic in Nouri University, Title : Watery cooler full automatic controller, Apr. 2005
● The best projection winner in line following robotic competitions, Title: Design and implementation a line follower robot in a mouse, Apr. 2005
● Citation from military service for creativity and innovation in Isfahan police news center, Sep.2008
● 603 Rank in an exam to BS degree, Mar. 2004
● Assist to final dissertation, Ehsan Aghaei student of Amirkabir University, Title: Automation of hot saw of steel in ESCO - Isfahan -Iran, Apr. 2007
STRENGTHS
● Self motivated ● Hardworking ● Creative ● Responsible Energetic
PROFESSIONAL MEMBERSHIPS
Engineers Australia, [Feb. 2012 – Present], ID: 3826561
Trades Recognition Australia, [Oct. 2013 – Present], Ref: TRA13/266296753
Isfahan building engineering organization, [Feb.2009 – Present], Memberships No : 20-530-10541
Iran Red Cross population, Memberships No : ث – 1326-5253, [ May. 2006 - Present ]
House of worker, Memberships No : 83103100131275, [ Sep.2009 – Present ]
OTHER EDUCATIONS
● Yokogawa CS3000 engineering and configuration. [18 Oct. 2014 – 22 Oct. 2014], ADICO Company, Tehran – Iran, www.adico.co
● Simatic Manager engineering, [Jun.2006 – Aug. 2006], Foolad Company - Iran, http://www.fooladtechnic.com
● Codevision traininng, [Mar. 2006 – May. 2006], Nouri University - Iran, http://www.mohaddes.ac.ir
● Altium training , [Sep.2004 – Des.2004], Nouri University,Iran, http://www.mohaddes.ac.ir
● French language course, elementary level, [Des.2009 – Feb.2010], Kosar Institute, Iran, Score: 95.0/100.0
REFERENCES
All references available upon request.