An Electrical and Instrumentation Engineer with knowledge of developing, maintaining electrical systems and controlling
industrial equipment and instruments focusing on economy, safety, reliability, quality and sustainability. I would like to apply
my knowledge and ideas in the research field of Electrical and Instrumentation Engineering and work with dedication and
punctuality to bring out the best.
Chief maintenance engineering/Supervision & implementation on an Executive ME...Qahtan Adnan
* Regarding to my MEP works of Implementation, Finishing, Pre-opening and Operating Maintenance for a:-
1- 36 floor, +five star hotel, 256 rooms & full facilities.
2- 24,000 Square Meter Five star hotel, 135 rooms & facilities.
3- 20,000 Square Meter Villa’s with full facilities.
4- Six floors, 165 rooms/ Accommodation building.
5- Fifth floor building / Plant room for a hospital FMC.
6- Flat 500 (square Meter) /with full luxury facilities.
My briefly duties were:-
• Managing designs, researches, and analysis on a project by project and advice for the best to be implemented and maintain for future time.
• Prepare all drawings on site according to specifications.
• Proposal all the suggestion to make the project plan in easiest way to implemented.
• Study and planning to estimated costs for the projects.
• Managing project schedules and budgets, and following obtain permits for operations.
• Following up engineering calculations connection with field and office assignments.
• Investigate & follow up all problems and recommend the best solutions to be applied.
• Prepared and reviewed engineering plans, specifications required, project schedules time, designs, circuit diagrams, and estimates for construction and maintenance of projects Gradually with the sequence of the project.
• Daily provided technical support for system operations and maintenance.
• Maintained connection effective working relationships with field crews, contractors, vendors, outside agencies, the staff members.
• Prepare requests of proposals and evaluate tenders.
• Ensure that safety requirements and standards procedures are implemented.
• Following up all payment with venders.
Chief maintenance engineering/Supervision & implementation on an Executive ME...Qahtan Adnan
* Regarding to my MEP works of Implementation, Finishing, Pre-opening and Operating Maintenance for a:-
1- 36 floor, +five star hotel, 256 rooms & full facilities.
2- 24,000 Square Meter Five star hotel, 135 rooms & facilities.
3- 20,000 Square Meter Villa’s with full facilities.
4- Six floors, 165 rooms/ Accommodation building.
5- Fifth floor building / Plant room for a hospital FMC.
6- Flat 500 (square Meter) /with full luxury facilities.
My briefly duties were:-
• Managing designs, researches, and analysis on a project by project and advice for the best to be implemented and maintain for future time.
• Prepare all drawings on site according to specifications.
• Proposal all the suggestion to make the project plan in easiest way to implemented.
• Study and planning to estimated costs for the projects.
• Managing project schedules and budgets, and following obtain permits for operations.
• Following up engineering calculations connection with field and office assignments.
• Investigate & follow up all problems and recommend the best solutions to be applied.
• Prepared and reviewed engineering plans, specifications required, project schedules time, designs, circuit diagrams, and estimates for construction and maintenance of projects Gradually with the sequence of the project.
• Daily provided technical support for system operations and maintenance.
• Maintained connection effective working relationships with field crews, contractors, vendors, outside agencies, the staff members.
• Prepare requests of proposals and evaluate tenders.
• Ensure that safety requirements and standards procedures are implemented.
• Following up all payment with venders.
je vous prie de trouver ci-joint mon curriculum vitae. Comme vous pourrez le constater a sa lecture, depuis près de 7 ans, j'ai acquis une riche expérience dans le domaine Instrumentation .
Maintenant je travailler à CNDG de Hassi R'mel avec ABB mais le projet est en voie d'achèvement, je recherche un emploi de superviseur en instrumentation secteur pétrolier ou d'autres secteur .
Je suis très intéressé à travailler dans votre entreprise,en souhaitant que ma candidature retienne votre attention et restant à votre entière disposition pour tout entretien à votre convenance.
Je vous remercie de votre temps et de votre considération, et j'ai hâte d'avoir de vos nouvelles bientôt.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Top 10 Oil and Gas Projects in Saudi Arabia 2024.pdf
Mohammed seddik-cv
1. Mohammed I. Seddik – E&I Engineer
Personal Information:
• Full Name: Mohammed Ibrahim Seddik Hassan Metwally
• Place and date of birth: Alexandria, Egypt - 5th
February 1992
• Nationality: Egyptian Marital Status: Married
• Military Service: Served at Egyptian Naval Forces
• Address: 12 Lamaey St, Sidi Beshr District, Alexandria, Egypt
• Cell Phone Number: +2 01210510131 / +2 01009519924 Telephone Number: +2 035273666
• E-mail Address: eng_mohammed_seddik@hotmail.com
Career Objective:
An Electrical and Instrumentation Engineer with knowledge of developing, maintaining electrical systems and controlling
industrial equipment and instruments focusing on economy, safety, reliability, quality and sustainability. I would like to apply
my knowledge and ideas in the research field of Electrical and Instrumentation Engineering and work with dedication and
punctuality to bring out the best.
Academic Qualifications:
• Bachelor (BSc) in Electrical Powers and Machines Engineering 2009 till 2014 from “Faculty of Engineering,
Alexandria University – Egypt”.
- Graduation Project: (Hybrid Renewable Energy System “Photovoltaic and Wind”)
Work Experience:
- Bechtel Oil, Gas and Chemicals, Inc. (February 2017: Present)
“BP West Nile Delta WND” EPC Project - Natural Gas Development Onshore Station
Giza Fayoum Brown Field “Asset Refurbishment” & Raven Green Field “New Construction”
Electrical and Instrumentation Field Engineer
- Technicalities:
1- Perform initial Ex Inspections on electrical and instrumentation equipment in explosive atmosphere “Ex Foundation
certified from JTL UK”.
2- Prepare Field Material Purchasing Orders for E&I equipment and bulks based on design requirements.
3- Handling the scope of pulling, glanding and termination of LV cables as per the cabling database SetRoute.
4- Engineering Support in installation and inspection of the following packages:
• Normal, Emergency and Street lighting in the process hazardous area and in the non-hazardous area following Ex
requirements. "New Construction and Asset Refurbishment".
• Process area instruments installation based on P&IDs, hook up drawings and Instrument location drawings.
• Tubing Work of all types on instruments as project specifications and standards. “Swagelok Standard”
• Fire and Gas field devices based on mapping layouts and ensuring the functionality of each device.
• PAS hardware cabinet installation “YOKOGAWA system”.
• Termination and glanding of all Power and Instrument cables “Certified from CMP”.
• Cable fan out trays and main raceways installation based on the details and layout drawings.
5- Doing cable schedule for the whole plant with termination and installation details.
- Quality Control (QC):
1- Perform quality control activities in terms of site surveys, inspections and preparing punch list for the subcontractors to
execute the work as per the quality plan, approved layouts, schematics and the project specifications.
2. Mohammed I. Seddik – E&I Engineer
2- Issue any observed design change performing as-builts in shapes of Field sketches or Field Change Documents for
technical approval such as “P&IDs, interconnection diagrams, instruments locations, lighting system and small power
loop diagrams and locations, cable routing, panels termination”.
3- Perform all types of integrity assessment on the existing equipment according to the issued criteria.
- Documentation Control:
1- Preparing construction work packages for the E&I subcontractors for all different scopes such as demolition, asset
refurbishment, new construction, maintenance and testing.
2- Review Installation Work Packages issued from subcontractor for proceeding on work authorizations.
3- Preparing material take off and bills of material (BOQ) for the construction scope based on the installation standard
details and layouts, checking availability of material against shortage and update the min/max consumable reports.
4- Collecting all technical date and requirements from issued drawings and documents from engineering or vendor
requirements for Field supervision on site to use.
5- Performing all kinds of project technical reports for engineering to clarify such as (RFI –NCR –FCD).
6- Perform turnover activities to the client based on project specifications and issued drawings.
- Health, Safety and Environment Training:
Has joined different training sessions and getting certified from BECHTEL WND project for the following “Project
ES&H Orientation – PPE – Job Hazard Analysis – Fall Protection – Excavation Protection – Confined Spaces
Protection – Scaffolding Certified Personal – Work Authorization – LOTO Permits - Commissioning and Operation
Areas Awareness”.
- The National Company for Fertilizers and Chemicals "AGROCHEM " (May 2016: January 2017)
Fertilizers and Chemicals production company - 3 Plants producing Sulphric Acid, Hydrochloric Acid, Ammonium
Sulphate and Potassium Sulphate.
Electrical and Instrumentation Maintenance Engineer
Scope of preventive maintenance schedule, calibration schedule, and spare parts management for all electrical equipment
and providing all technical support during shifts: -
“Lighting Systems maintenance - Repairing control circuits malfunctions - Motors installation and maintenance - Switch
gear maintenance and Emergency generators loading at power outage cases”.
- Automation: -
1- Classic control circuits designing and implementation using Siemens Classic components.
2- PLC programming using (Schneider Software).
- Instrumentation: -
1- Instrumentation Maintenance, Calibration and Installation for Instruments and Sensors for all types like (Honeywell,
Rosemount, Endress+Hauser) such as: - “Pressure transmitter - Level transmitter such as: Radar and differentiation
pressure - Valves (on/off & positional control valve)”.
2- Using HART device developed by FLUKE for calibration Level transmitters, pressure and differential pressure
transmitters.
3- Installing and maintenance for different types of Temperature sensors such as: - (Thermo-Couple and RTD).
- Lectro Egypt for Electrical Products and Contracting Co. "LectroBar" (Nov. 2015: April 2016)
Lectrobar Busway Factory unique in complete designing, manufacturing and installing
The Low Voltage Busbars from 25A to 6400A.
Technical Office Engineer
The scope of work includes Sites survey, Shop Drawings (using AutoCAD software), Tendring Drawing, Production
Orders and Installation Supervision.
- Designing and installing 1600A Bus duct system for Mido Factory electrical LV substation.
3. Mohammed I. Seddik – E&I Engineer
Technical Skills and Courses:
• AutoCAD drawing 2D, 3D.
• Ex Foundation Certified Electrical Engineer from JTL.
• LV Cables Gland installation awareness certified from CMP.
• Automation Control Diploma certificated from Schneider Electric. PLC using Schneider Software (UnityPro, Zelio) and
SCADA designing for industrial systems with Schneider Software (Citect Vejio).
• Classic control designing and implementation certified from Schneider Electric.
• PCB designing and Soldering experience with Software Designing using (Eagle Soft).
• A complete knowledge of OSHA General industrial safety & Health standards (29 CFR 1910) certified from Egypt
Syndicate of Engineers.
• ICDL Programs (Microsoft Office Programs).
- Certifications are available upon request
Profile:
• Official member of Egypt Syndicate of Engineers.
• Very good communication, presentation and team working skills, Energetic, hard worker and open-minded. Decision-
making skills and the ability to prioritize and plan effectively with Algorithmic and logical approaches to all tasks.
Successfully working with people from different disciplines, Quick learner and able to take initiative.
Language Proficiency:
• Arabic: Mother Tongue. English: Fluent with good accent (British and American).
References:
• Robert Wynne / +61402251931 (Electrical Lead Engineer at Bechtel rcwynne@bechtel.com)
• David Munro / +4407984181119 (E&I Manager at Bechtel davidmunrouk@yahoo.co.uk)
• Hesham Abdel-Hady / +201005565568 (E&I Maintenance Manager at Agrochem)
• Mohammed Ibrahim / +201118646176 (Technical Office Senior Engineer at Lectrobar)