Avinash H is an electronics and communications engineer with over 10 years of experience in project management, execution, installation and commissioning of industrial automation projects. He has extensive experience programming PLCs from Allen Bradley, Siemens and Omron, as well as developing HMI/SCADA interfaces using WinCC, Intouch and other software. Currently working as an application and design engineer for BFL Hydro, he is responsible for engineering, designing and developing automation applications for hydroelectric power plants.
P. Dasu is an industrial automation engineer with over 1 year of experience seeking a challenging position. He has expertise in PLC programming, SCADA development, and maintaining field instruments. He currently works for GGIPL as a site engineer for ABB commissioning DCS and installations. Previously he worked for SRI SIDHA BINAYAK ELECTRICALS and has technical proficiency in PLCs, SCADA, HMI, drives, and commissioning electrical equipment.
This document contains the resume of Swapnil Shewalkar, an automation engineer with over 2 years of experience in process automation. He has worked on projects involving DCS, PLC, and SCADA systems from Emerson and Honeywell. Some of the key projects listed are for oil and gas facilities in Saudi Arabia and India. The resume outlines his technical skills, education qualifications, and work experience in detail.
P. Dasu is seeking a position in industrial automation with opportunities for growth. He has over 1 year of experience in automation and expertise in PLC programming, SCADA development, and maintaining field instruments. Currently working as a site engineer for GGIPL on an ABB contract involving commissioning and installation of DCS systems and programming for ONGC oil and gas projects across India.
This document is an application by Enayatullah Wahab for a project assistant or SCADA engineer position. It outlines his professional experience over 6 years working on automation and SCADA projects in India and the UAE. It also lists his core competencies including project coordination, electrical engineering, administration, and computer skills. Examples of relevant projects are provided along with responsibilities and technologies used such as RTUs, PLCs, SCADA systems, and various protocols.
Yogesh Chandrakant Kumbhar is an automation engineer with over 3 years of experience in industrial automation. He has experience with PLCs, HMIs, SCADA, servo motors, and motion controllers from manufacturers like Omron, GE Fanuc, Honeywell, and more. He has worked on automation projects in various industries like pharmaceuticals, chemicals, water treatment, packaging, oil and gas. His responsibilities have included panel design, PLC programming, HMI development, commissioning, training and support. He is looking for a challenging position as an automation engineer.
This document provides a summary of Sugumar N's qualifications and experience. He has 9.4 years of work experience as a Senior Software Engineer. His expertise includes C, C++, embedded development, automotive and bio-medical domains, testing tools like INCA and CANalyzer, communication protocols like CAN and LIN, microcontrollers like 8051 and PIC, and IDEs like Keil C and MPLAB. He has worked on projects involving seat control ECUs, battery charging units, pump parameter displays, and implementing CAN frames.
Akhileshwar Nath Singh is seeking a career that utilizes his 5 years of experience in electrical and industrial automation projects. He currently works as a Design & Testing Engineer at Mettler Toledo India Pvt Ltd, where he is responsible for planning, designing, and implementing electrical systems and automation for automated machinery. He has expertise in PLC programming, electrical schematic design, control panel design, hazardous area applications, and industrial automation. He has worked on projects for clients like Nestle, DRL, Cadbury, Lanxess, ITC, and others.
Samuel Jaideep Kumar Joseph has over 15 years of experience in commissioning, integration, maintenance and troubleshooting of RTU and SCADA systems. He currently works as a Program Management Engineer for Detecon Al Saudia Co. Ltd. in Saudi Arabia, where he manages project teams and reports. Previously, he worked as a Senior Project Lead in India commissioning energy metering, substation monitoring and industrial automation systems. He has expertise in hardware design, PLC programming, and protocol-based communication systems.
P. Dasu is an industrial automation engineer with over 1 year of experience seeking a challenging position. He has expertise in PLC programming, SCADA development, and maintaining field instruments. He currently works for GGIPL as a site engineer for ABB commissioning DCS and installations. Previously he worked for SRI SIDHA BINAYAK ELECTRICALS and has technical proficiency in PLCs, SCADA, HMI, drives, and commissioning electrical equipment.
This document contains the resume of Swapnil Shewalkar, an automation engineer with over 2 years of experience in process automation. He has worked on projects involving DCS, PLC, and SCADA systems from Emerson and Honeywell. Some of the key projects listed are for oil and gas facilities in Saudi Arabia and India. The resume outlines his technical skills, education qualifications, and work experience in detail.
P. Dasu is seeking a position in industrial automation with opportunities for growth. He has over 1 year of experience in automation and expertise in PLC programming, SCADA development, and maintaining field instruments. Currently working as a site engineer for GGIPL on an ABB contract involving commissioning and installation of DCS systems and programming for ONGC oil and gas projects across India.
This document is an application by Enayatullah Wahab for a project assistant or SCADA engineer position. It outlines his professional experience over 6 years working on automation and SCADA projects in India and the UAE. It also lists his core competencies including project coordination, electrical engineering, administration, and computer skills. Examples of relevant projects are provided along with responsibilities and technologies used such as RTUs, PLCs, SCADA systems, and various protocols.
Yogesh Chandrakant Kumbhar is an automation engineer with over 3 years of experience in industrial automation. He has experience with PLCs, HMIs, SCADA, servo motors, and motion controllers from manufacturers like Omron, GE Fanuc, Honeywell, and more. He has worked on automation projects in various industries like pharmaceuticals, chemicals, water treatment, packaging, oil and gas. His responsibilities have included panel design, PLC programming, HMI development, commissioning, training and support. He is looking for a challenging position as an automation engineer.
This document provides a summary of Sugumar N's qualifications and experience. He has 9.4 years of work experience as a Senior Software Engineer. His expertise includes C, C++, embedded development, automotive and bio-medical domains, testing tools like INCA and CANalyzer, communication protocols like CAN and LIN, microcontrollers like 8051 and PIC, and IDEs like Keil C and MPLAB. He has worked on projects involving seat control ECUs, battery charging units, pump parameter displays, and implementing CAN frames.
Akhileshwar Nath Singh is seeking a career that utilizes his 5 years of experience in electrical and industrial automation projects. He currently works as a Design & Testing Engineer at Mettler Toledo India Pvt Ltd, where he is responsible for planning, designing, and implementing electrical systems and automation for automated machinery. He has expertise in PLC programming, electrical schematic design, control panel design, hazardous area applications, and industrial automation. He has worked on projects for clients like Nestle, DRL, Cadbury, Lanxess, ITC, and others.
Samuel Jaideep Kumar Joseph has over 15 years of experience in commissioning, integration, maintenance and troubleshooting of RTU and SCADA systems. He currently works as a Program Management Engineer for Detecon Al Saudia Co. Ltd. in Saudi Arabia, where he manages project teams and reports. Previously, he worked as a Senior Project Lead in India commissioning energy metering, substation monitoring and industrial automation systems. He has expertise in hardware design, PLC programming, and protocol-based communication systems.
Todd Calvert is seeking a position as a senior controls engineer. He has over 25 years of experience programming PLCs, HMIs, and industrial control systems across various industries. His background includes experience with Allen-Bradley, Modicon, Eaton, Omron, Mitsubishi, Siemens, Yaskawa, and Square D control systems. Currently he works as a controls engineer for Honda configuring and troubleshooting their ActivPlant factory software system.
My target is to be employed by an organization for a Management Level post where the following would be applicable:
-Continuous development for my skills and capabilities based on periodic appraisal for my performance.
-Supporting my career path in conformity with the organizational strategy and objectives.
My previous and current professional experience to be considered:
-Facility Management
-Project Coordination (large scale projects)
-Pre-sales and Marketing (Enterprise Building Solutions: Security and Building Management)
-Building Management Systems (pre-sales, sales, engineering, commissioning and start-up)
-Academic Research (electro-magnetic waves)
Additional trainings/certificates/diplomas conducted:
-Project Management Professionals (PMP Certified-Project Management Institute PMI)
-Professional Diploma on Human Resources (Certificate Project: Planning for Establishing Honeywell Training and Development Academy)
-Leadership workshop (Honeywell Corporate)
-Six Sigma Green Belt Certificated (Certificate Project: Investigating Local Market for Enterprise Building Integrated Solutions "EBI" - Honeywell Corporate)
Looking forward to being short-listed for interviews by recruiters for one of the below working areas (willing to travel or relocate as needed):
-Facility Management
-Building Automation/Management and Integrated Systems
-Business Development Management (Sales and Marketing activities as needed)
-Project Management
This document contains a resume for Sandeep L. Anugade, an automation professional with over 10 years of experience in hardware engineering, designing, commissioning, and executing automation projects for various industrial domains. It lists his technical skills and experience programming PLCs from Siemens and Allen-Bradley, along with HMIs, drives, and other industrial software. It also provides details on several automation projects he has worked on, including for power plants, hydroelectric plants, and automotive manufacturing facilities.
Jobby Thomas is an instrumentation and electrical site engineer with over 12 years of experience working on projects in Qatar and India, including for Hamad International Airport and Dubai Metro. He is looking for a new position and provides details on his career history, roles and responsibilities, and technical skills including experience with Honeywell, Siemens, Johnson Controls, and other building management systems. His objective is to work in a challenging environment where he can contribute to the team and organization.
P. Dasu is an Industrial Automation Engineer seeking a challenging position in the field. He has over 2 years and 6 months of experience in automation. He is proficient in PLC programming, SCADA development, and site maintenance. He has expertise in ABB PLCs and SCADA Vantage software. Currently he is working as a Site Engineer for GGIPL on an ONGC project involving monitoring of production and drilling data across various sites in India.
Rajnish Singh Chauhan has over 18 years of experience in plant maintenance and engineering. He is currently a Senior Manager of Maintenance at Moser Baer India Limited, where he oversees a team of 90 associates and is responsible for plant maintenance, upgrading technologies, energy savings projects, and more. Previously, he held positions with several other companies where he led projects involving installations, commissioning, automation, and preventive maintenance. He has a B.E. in Electronics and Communication and an MBA in Operations.
Jawwad Ahmed is a design engineer for ELV (electrical, lighting, and ventilation) systems in Dubai, UAE. He has over 4 years of experience in control and security systems including CCTV, access control, PA systems, parking solutions, gate barriers, and structured cabling. He is seeking a position that allows him to utilize his skills in security, control, automation and alternative energy.
Anas Satti is seeking a position that utilizes his analytical, interpersonal, leadership and organizational skills. He has over 2 years of experience in building management systems commissioning and controls. His technical skills include experience programming and troubleshooting HVAC and lighting controls systems using MetaSys SCT, CCT and other software. He has worked on projects in Bahrain, Sharjah, Abu Dhabi and Pakistan commissioning and installing controls for buildings, airports and telecommunications systems.
Darshankumar Trivedi is seeking an electrical engineer position and has over 3 years of experience implementing large control system projects. He has skills in PLC, HMI, and DCS programming as well as AutoCAD. His experience includes developing control systems for ExxonMobil and Constellation Energy. He has a Master's degree in Electrical Engineering from Lamar University.
The document provides a career summary for an electrical engineer with over 12 years of experience in offshore electrical design. It lists engineering projects the candidate has worked on, including various offshore vessels and FPSOs. Responsibilities included electrical design work such as preparing drawings, cable schedules, coordinating with vendors, and addressing site queries. The candidate's experience includes working as an electrical engineer/3D modeler for multiple companies in Singapore.
Training report prepared on PLC on CNC at BHEL,Hyderabad. It have sufficient slides to know the basics about PLC on CNC and working of that with coding. It was worth learning on BHEL.
M.U. Shameem Ahamed is a 26-year-old Indian national working as a Commissioning Engineer in Abu Dhabi, UAE. He has 6 years of experience in electrical engineering projects in Saudi Arabia and UAE, including commissioning, testing, and handing over electrical systems. He holds a Bachelor's degree in Electrical and Electronics Engineering from India.
The document is an industrial training report submitted by Gaurav Singh to Pandit Deendayal Petroleum University. It details Gaurav's 4 week training at AI Automation in Bhopal, where he learned about programmable logic controllers (PLCs) and supervisory control and data acquisition (SCADA) systems. The report includes an overview of AI Automation, introductions to PLCs and SCADA, and descriptions of PLC architecture, programming, and applications as well as SCADA features, usefulness, and advantages/disadvantages.
The document provides a summary of Muhammad Danish Rafiq's work experience and qualifications. It includes his contact information and objective. It then summarizes his roles as a Senior Project Engineer at Al Muhandis in Abu Dhabi and previous engineering roles in Pakistan, listing his responsibilities in electrical, instrumentation and control systems design, installation and maintenance. It also lists his educational background and professional affiliations.
Saichander Thirunagari is seeking a senior level position in design engineering or automation. He has over 6 years of experience in PLC programming, instrumentation, project management, automation projects, and customer support. He is currently a senior executive at Signode India Ltd. and has expertise in areas like process analysis, vendor development, engineering drawings, budgeting, and troubleshooting. He is proficient in software like Siemens Step 7, Allen Bradley RSLogix 5000, and Mitsubishi IQ Works. He has worked on several automation projects in industries like steel, cement, glass, and mining.
Sumeet Mhatre is a senior project engineer with over 3 years of experience in project management, development, operation and maintenance of energy management systems. He currently works for Consulta Enterprises developing and executing automation and EMS projects. Some of his responsibilities include planning projects, creating budgets, developing technical proposals, and documenting completed projects. He has skills in PLC programming, HMI development, SCADA systems, electrical work, and variable frequency drives. His experience includes projects mapping energy meters to software, load management, and report generation.
Siddhartha Saxena is seeking an assembly shop maintenance engineer position. He has over 4 years of experience in maintenance engineering. He has worked at Marriott Courtyard hotel in Agra as a maintenance engineer since 2015, where he controlled hotel systems through PLC panels and maintained various utilities. Prior to this, he worked at Atlas Copco from 2012-2014 as a service engineer, maintaining assembly tools and keeping records. He has technical skills in preventative maintenance, communication protocols, calibration, and optimization. He holds certifications as a certified service technician and has completed various trainings.
Basheer Ahamed is an ELV engineer with over 2 years of experience managing ELV systems projects in Qatar. He leads teams of 50+ professionals and is responsible for project coordination, documentation, testing and commissioning, and handover. His skills include CCTV, fire alarm, public address systems, networking, and Active Directory administration. Previously he worked as a network support engineer for Etisalat in the UAE and Dishnet Wireless in India, where he troubleshot routers, desktops, and IPTV issues. He holds a Bachelor's degree in ECE from Anna University and certifications in CCNA, MCSA, and CCNP.
Davinder Lahil has over 5 years of experience as a junior electrical engineer providing engineering design services in Canada, including the design of low voltage power distribution systems, indoor and outdoor lighting systems, and project management. He has considerable experience in engineering design, specification writing, construction inspection, and project management for various land development, municipal, utility, industrial, institutional and commercial projects. He is proficient in AutoCAD, MicroStation, REVIT, ETAP, AGi32 and has knowledge of PLC programming and languages like C, VHDL and Verilog.
Vinay Patil has over 6 years of experience as a senior software engineer specializing in PLC, DCS, and SCADA programming. He has extensive experience working on automation projects for clients in various industries. Some of the key projects he has worked on involve cement plant automation, power plant automation, and mineral separation systems. He is proficient in programming languages for controllers from manufacturers such as ABB, Schneider, and Rockwell. Patil is looking for a new challenging position that will further develop his skills and experience in process automation.
Melwin Miranda is seeking a career in a hi-tech corporate environment. He has over 2 years of experience in PLC programming, SCADA development, HMI design, and commissioning of continuous casting machines. He has worked on numerous projects for clients in India and abroad involving automation of casting machines using Rockwell, Siemens, and Mitsubishi controllers. His technical skills include ladder logic, various programming software, communication protocols, and configuration of drives and HMIs. He holds a Bachelor's degree in Electronics Engineering.
Todd Calvert is seeking a position as a senior controls engineer. He has over 25 years of experience programming PLCs, HMIs, and industrial control systems across various industries. His background includes experience with Allen-Bradley, Modicon, Eaton, Omron, Mitsubishi, Siemens, Yaskawa, and Square D control systems. Currently he works as a controls engineer for Honda configuring and troubleshooting their ActivPlant factory software system.
My target is to be employed by an organization for a Management Level post where the following would be applicable:
-Continuous development for my skills and capabilities based on periodic appraisal for my performance.
-Supporting my career path in conformity with the organizational strategy and objectives.
My previous and current professional experience to be considered:
-Facility Management
-Project Coordination (large scale projects)
-Pre-sales and Marketing (Enterprise Building Solutions: Security and Building Management)
-Building Management Systems (pre-sales, sales, engineering, commissioning and start-up)
-Academic Research (electro-magnetic waves)
Additional trainings/certificates/diplomas conducted:
-Project Management Professionals (PMP Certified-Project Management Institute PMI)
-Professional Diploma on Human Resources (Certificate Project: Planning for Establishing Honeywell Training and Development Academy)
-Leadership workshop (Honeywell Corporate)
-Six Sigma Green Belt Certificated (Certificate Project: Investigating Local Market for Enterprise Building Integrated Solutions "EBI" - Honeywell Corporate)
Looking forward to being short-listed for interviews by recruiters for one of the below working areas (willing to travel or relocate as needed):
-Facility Management
-Building Automation/Management and Integrated Systems
-Business Development Management (Sales and Marketing activities as needed)
-Project Management
This document contains a resume for Sandeep L. Anugade, an automation professional with over 10 years of experience in hardware engineering, designing, commissioning, and executing automation projects for various industrial domains. It lists his technical skills and experience programming PLCs from Siemens and Allen-Bradley, along with HMIs, drives, and other industrial software. It also provides details on several automation projects he has worked on, including for power plants, hydroelectric plants, and automotive manufacturing facilities.
Jobby Thomas is an instrumentation and electrical site engineer with over 12 years of experience working on projects in Qatar and India, including for Hamad International Airport and Dubai Metro. He is looking for a new position and provides details on his career history, roles and responsibilities, and technical skills including experience with Honeywell, Siemens, Johnson Controls, and other building management systems. His objective is to work in a challenging environment where he can contribute to the team and organization.
P. Dasu is an Industrial Automation Engineer seeking a challenging position in the field. He has over 2 years and 6 months of experience in automation. He is proficient in PLC programming, SCADA development, and site maintenance. He has expertise in ABB PLCs and SCADA Vantage software. Currently he is working as a Site Engineer for GGIPL on an ONGC project involving monitoring of production and drilling data across various sites in India.
Rajnish Singh Chauhan has over 18 years of experience in plant maintenance and engineering. He is currently a Senior Manager of Maintenance at Moser Baer India Limited, where he oversees a team of 90 associates and is responsible for plant maintenance, upgrading technologies, energy savings projects, and more. Previously, he held positions with several other companies where he led projects involving installations, commissioning, automation, and preventive maintenance. He has a B.E. in Electronics and Communication and an MBA in Operations.
Jawwad Ahmed is a design engineer for ELV (electrical, lighting, and ventilation) systems in Dubai, UAE. He has over 4 years of experience in control and security systems including CCTV, access control, PA systems, parking solutions, gate barriers, and structured cabling. He is seeking a position that allows him to utilize his skills in security, control, automation and alternative energy.
Anas Satti is seeking a position that utilizes his analytical, interpersonal, leadership and organizational skills. He has over 2 years of experience in building management systems commissioning and controls. His technical skills include experience programming and troubleshooting HVAC and lighting controls systems using MetaSys SCT, CCT and other software. He has worked on projects in Bahrain, Sharjah, Abu Dhabi and Pakistan commissioning and installing controls for buildings, airports and telecommunications systems.
Darshankumar Trivedi is seeking an electrical engineer position and has over 3 years of experience implementing large control system projects. He has skills in PLC, HMI, and DCS programming as well as AutoCAD. His experience includes developing control systems for ExxonMobil and Constellation Energy. He has a Master's degree in Electrical Engineering from Lamar University.
The document provides a career summary for an electrical engineer with over 12 years of experience in offshore electrical design. It lists engineering projects the candidate has worked on, including various offshore vessels and FPSOs. Responsibilities included electrical design work such as preparing drawings, cable schedules, coordinating with vendors, and addressing site queries. The candidate's experience includes working as an electrical engineer/3D modeler for multiple companies in Singapore.
Training report prepared on PLC on CNC at BHEL,Hyderabad. It have sufficient slides to know the basics about PLC on CNC and working of that with coding. It was worth learning on BHEL.
M.U. Shameem Ahamed is a 26-year-old Indian national working as a Commissioning Engineer in Abu Dhabi, UAE. He has 6 years of experience in electrical engineering projects in Saudi Arabia and UAE, including commissioning, testing, and handing over electrical systems. He holds a Bachelor's degree in Electrical and Electronics Engineering from India.
The document is an industrial training report submitted by Gaurav Singh to Pandit Deendayal Petroleum University. It details Gaurav's 4 week training at AI Automation in Bhopal, where he learned about programmable logic controllers (PLCs) and supervisory control and data acquisition (SCADA) systems. The report includes an overview of AI Automation, introductions to PLCs and SCADA, and descriptions of PLC architecture, programming, and applications as well as SCADA features, usefulness, and advantages/disadvantages.
The document provides a summary of Muhammad Danish Rafiq's work experience and qualifications. It includes his contact information and objective. It then summarizes his roles as a Senior Project Engineer at Al Muhandis in Abu Dhabi and previous engineering roles in Pakistan, listing his responsibilities in electrical, instrumentation and control systems design, installation and maintenance. It also lists his educational background and professional affiliations.
Saichander Thirunagari is seeking a senior level position in design engineering or automation. He has over 6 years of experience in PLC programming, instrumentation, project management, automation projects, and customer support. He is currently a senior executive at Signode India Ltd. and has expertise in areas like process analysis, vendor development, engineering drawings, budgeting, and troubleshooting. He is proficient in software like Siemens Step 7, Allen Bradley RSLogix 5000, and Mitsubishi IQ Works. He has worked on several automation projects in industries like steel, cement, glass, and mining.
Sumeet Mhatre is a senior project engineer with over 3 years of experience in project management, development, operation and maintenance of energy management systems. He currently works for Consulta Enterprises developing and executing automation and EMS projects. Some of his responsibilities include planning projects, creating budgets, developing technical proposals, and documenting completed projects. He has skills in PLC programming, HMI development, SCADA systems, electrical work, and variable frequency drives. His experience includes projects mapping energy meters to software, load management, and report generation.
Siddhartha Saxena is seeking an assembly shop maintenance engineer position. He has over 4 years of experience in maintenance engineering. He has worked at Marriott Courtyard hotel in Agra as a maintenance engineer since 2015, where he controlled hotel systems through PLC panels and maintained various utilities. Prior to this, he worked at Atlas Copco from 2012-2014 as a service engineer, maintaining assembly tools and keeping records. He has technical skills in preventative maintenance, communication protocols, calibration, and optimization. He holds certifications as a certified service technician and has completed various trainings.
Basheer Ahamed is an ELV engineer with over 2 years of experience managing ELV systems projects in Qatar. He leads teams of 50+ professionals and is responsible for project coordination, documentation, testing and commissioning, and handover. His skills include CCTV, fire alarm, public address systems, networking, and Active Directory administration. Previously he worked as a network support engineer for Etisalat in the UAE and Dishnet Wireless in India, where he troubleshot routers, desktops, and IPTV issues. He holds a Bachelor's degree in ECE from Anna University and certifications in CCNA, MCSA, and CCNP.
Davinder Lahil has over 5 years of experience as a junior electrical engineer providing engineering design services in Canada, including the design of low voltage power distribution systems, indoor and outdoor lighting systems, and project management. He has considerable experience in engineering design, specification writing, construction inspection, and project management for various land development, municipal, utility, industrial, institutional and commercial projects. He is proficient in AutoCAD, MicroStation, REVIT, ETAP, AGi32 and has knowledge of PLC programming and languages like C, VHDL and Verilog.
Vinay Patil has over 6 years of experience as a senior software engineer specializing in PLC, DCS, and SCADA programming. He has extensive experience working on automation projects for clients in various industries. Some of the key projects he has worked on involve cement plant automation, power plant automation, and mineral separation systems. He is proficient in programming languages for controllers from manufacturers such as ABB, Schneider, and Rockwell. Patil is looking for a new challenging position that will further develop his skills and experience in process automation.
Melwin Miranda is seeking a career in a hi-tech corporate environment. He has over 2 years of experience in PLC programming, SCADA development, HMI design, and commissioning of continuous casting machines. He has worked on numerous projects for clients in India and abroad involving automation of casting machines using Rockwell, Siemens, and Mitsubishi controllers. His technical skills include ladder logic, various programming software, communication protocols, and configuration of drives and HMIs. He holds a Bachelor's degree in Electronics Engineering.
Ranjith Kumar is seeking a position in industrial automation where he can learn and solve problems. He has experience programming PLCs and HMIs from Schneider and Allen-Bradley and skills in ladder logic, SCADA, networking protocols, and Microsoft Office. His current role involves designing and implementing automation systems for water treatment plants, parking ventilation, and solar air conditioning using PLCs, HMIs, sensors, and VFDs. Ranjith holds a B.Tech in electrical engineering and is proficient in Kannada, English, Hindi, and Telugu.
overview of plc and dcs...
A general information about the common plcs used and how SCADA software is used for virtualising the entire plant equipments and sensors and control them within a single control room.
Pintu Roy is seeking a motivating position to utilize his creativity and contribute to organizational growth. He has over 2 years of experience as an electrical maintenance engineer and automation engineer. His experience includes preventative and breakdown maintenance of EOT cranes, VFD programming, PLC programming, and commissioning various automation projects. He is proficient with software like ABB Drive Software, RSView32, and has experience with brands like ABB, Rockwell Automation, and Siemens. He holds a B.E. in electronics and communication engineering.
Mike Ward is a Chartered Electrical Engineer with a Masters in Digital Electronics and extensive industry experience. He has sole ownership of a patent for a wireless data logging system using RF transceivers at 433Mhz. He has experience managing full project life cycles from inception to delivery and covering all aspects of design, manufacturing, support and sale of electrical equipment.
This document is a curriculum vitae for Arjunarao Dondapati that includes:
1) Over 12 years of experience in embedded technology working on various product development projects and is looking for a challenging role in embedded testing.
2) Educational background of a Bachelor's degree in Instrumentation Engineering.
3) Extensive experience in areas like software testing, system engineering, various hardware and software tools, and communication protocols.
- MuhammadShahid Bilal has 14 years of experience as an electronic engineer working with PLCs and automation controls in cement plants in Pakistan and Saudi Arabia.
- He holds a Bachelor's degree in Electronics Engineering and is seeking a managerial position to make full use of his skills and experience in programming various PLC software, maintaining instrumentation systems, and minimizing plant downtime.
- His experience includes extensive programming with Schneider PLC software, Siemens PLC software, ABB DCS software, frequency drives, and FLS automation software, as well as maintaining and calibrating various field instruments.
Pankaj Pal provides a summary of his experience and qualifications for a middle management role in automation and instrumentation. He has over 5 years of experience in project engineering, design, software development, commissioning, and technical support of automation systems. He is proficient in PLC programming, SCADA application development, loop testing, commissioning, and network configuration. He has worked on numerous automation projects in industries such as oil and gas extraction, water treatment, power generation, and grain storage.
Jim Phillips has over 28 years of experience in industrial controls including project management, PLC and HMI design, programming and commissioning. He has a BSEE from Auburn University and expertise with Allen Bradley, Wonderware and other automation systems. His experience spans various industries and includes designing control systems, programming PLCs/HMIs, and managing projects from design through commissioning. He is seeking permanent or contract employment utilizing his extensive automation background.
J. Ravi Kumar has nearly 25 years of experience in project management, embedded systems development, and research and development. He currently works as Director of Technical Operations at AMI Tech, managing projects related to SCADA systems and smart grids. Some of his responsibilities include project planning and monitoring, requirements gathering, product development, and client liaison. He has extensive experience leading projects for electricity boards and other clients in areas like SCADA, energy management, and automation.
Punit Gupta is applying for a position as an industrial electronics engineer. He has 4 years of experience as a project engineer working with PLCs, drives, HMIs, and various automation software. He is seeking a new challenging position where he can further develop his automation and control skills.
This document is a curriculum vitae for Arjunarao. D that summarizes his professional experience and qualifications. He has over 12 years of experience in embedded systems working on various product development projects. Currently he is a Team Leader at Cyient Limited and has previously held positions at Bombardier Transportation, Philips Electronics, Aquila Technologies, and Weighman Industries. He has a Bachelor's degree in Instrumentation Engineering and experience in areas like software testing, hardware design, and firmware development for projects in various domains including rail transportation, consumer electronics, medical devices, and education.
- Syed Mohamed Ali is an Indian national with over 9 years of experience in industrial automation. He has a bachelor's degree in electronics and communication engineering.
- He has experience leading automation projects for clients in UAE, France, India, and Kuwait. These projects involve configuring PLCs, SCADA systems, HMIs, and commissioning control systems.
- He has strong skills in software like RSLogix 5000, FactoryTalk View SE, Wonderware, and various HMI packages.
The document is a curriculum vitae for Mohammed Tauseef Mohinuddin. It summarizes his career objective, technical proficiencies including experience with automation controllers and programming languages, education qualifications including a Bachelor's degree in Electronics and Communication, and academic and personal details. It also lists his work experience with companies like ABB and Yokogawa on various automation and control projects.
Gaurav Dhawan is an automation and instrumentation engineer with over 8.5 years of experience in process control, project execution, planning, procurement, and design, installation, commissioning, operation, and maintenance of control, instrumentation, and automation systems. He has expertise in Allen Bradley PLCs, VFDs, HMIs, and SCADA systems as well as programming, commissioning, and integration experience. Some of his project experience includes projects in the water, power, and manufacturing industries. He is seeking a position that utilizes his skills and experience in automation.
Pyrotech World is a brand pf Pyrotech Marketing and Projects Private Limited. It is a leading systems integration company in India.
The company provides a host of products and services to OEMs and end users in the industrial sector across the world.
Inception Institute of Industrial Training is one of the leading institutions, providing quality Industrial Training particularly in Industrial Automation, Embedded System & Robotic Vision. It aims at bridging the skill gap between Industries & Engineering students.
The emphasis of IIIT is on offering a wide range of high quality innovative industrial training programs with particular focus on automation related industry and also other emerging technologies. The target group envisaged covers all levels of working professionals from industry, faculty, staff and students of engineering institutions and polytechnics.
Vivek Mehta has over 3 years of experience working as a senior project engineer on automation projects. He has extensive experience programming PLCs and SCADA systems from Honeywell including the DCS C300, PLCs HC900 and ML200, and SCADA platforms like EPKS. He has worked on numerous projects in India for companies across various industries. His responsibilities have included I/O configuration, graphics development, logic programming, testing, installation, and commissioning. He is proficient in programming languages like FBD and ladder logic.
Sidharth Silla is seeking a position as an electrical engineer with experience in controls and automation using PLCs, HMIs, and SCADA systems. He has over 6 years of experience programming and configuring Allen Bradley and Siemens PLCs for applications in manufacturing, power generation, and distribution. His skills include ladder logic, HMI development, networking protocols, and automation tools like RSLogix 5000, FactoryTalk, and Step 7. Sidharth holds a Master's degree in Electrical Engineering and is authorized to work in the US for any employer.
Similar to Avinash_5_years_Process_Automation (20)
1. AVINASH H
Mail:avi.ank@gmail.com
ph:+919844727753
Objectives:-
Electronics & Communication Engineer with strong background of Project Management, Execution, Installation and
commissioning.
Experience:-
Working as a Design and application engineer in BFL Hydro from DEC 2014 to till date.
Worked as a Systems Engineer in Adecco India Pvt Ltd for Client Siemens Technology Services Pvt Ltd from Aug 2013 to
nov 2014.
Worked as Field Engineer in Suzlon Energy Ltd from Aug-2010 to Dec-2012
PROFESSIONAL EXPERIENCE
Company Name: B FOURESS PRIVATE LTD
Duration: Dec 2014 to till Date
Location: Central America.
Company Profile: Today, BFL is one of the largest and fastest-growing providers of water-to-wire, turnkey solutions,
delivering small hydro plants with outputs ranging from 0.5 megawatts to 35 megawatts. We provide equipment and
total service, from machine selection to power plant commissioning, working in true partnership with our customers
every step of the way.
With growth fueled by our laser-like focus on customer satisfaction, over 100 BFL hydropower solutions dot every
continent of the world (except Antarctica). Almost 50% of our projects are repeat business, with customer referrals
driving another 25% of revenues.
Designation: Application and Design Engineer.
Projects: Multiple Hydro Projects.
Description:
I’m individually responsible for Engineering, Designing and developing Application for Hydro power plants. Will
be involved in designing Automation systems, Network configuration, integrating of various IED’s to Allen Bradley and
Siemens PLC’s as per the Customer requirements. Also responsible for developing of Various HMI, Scada screens and
PLC’s logics based on the type turbine and Instruments used.
Involved in Selecting Suitable and Efficient Devices, Like Controllers, HMI, Scada Products and Electronic devices
As per Technical Specification Approved by the customers Logic building in PLC, HMI and creating all types of Graphic
designs required for Controlling and Monitoring the Power plant.
Roles and Responsibility:
Designing network configuration having various protocols and integrating between PLC’s based on the customer
requirements.
Selection and fit in purpose of instruments required for power plant automatic operation.
Programming of PLC’s based on the turbine and instrument used.
Integration and programming of various Siemens IED’s (7UT and 7AS) to PLC for plant and generator protection.
Programming of MDM (PAC 4200) Energy meters to PLC’s for monitoring various electrical parameters on
MODBUS TCP/IP protocol.
Programming of PLC’s in grid mode and isolated mode based on the power requirements.
Programming of electrical isolation mode using Step and PID loop configuration.
Configuration and integration of motion drives for different rating feeders for Auxiliary in the Power House.
2. Monitoring and programming power consumption through PAC4200 and controlling the plant load.
Controlling of 4-20 ma control valves using PID loop. Synchronizing generator to grid using SPMD synch device at
rated speed.
Creating data logging for various electrical parameters and report generation using standard DOT NET report
format.
Feeder protection: Speed control for motor and current limiting.
Systems Used:
Allen Bradley, Compact and Control Logix including Hot Redundant CPU’s and Communication Systems. Panel
View Plus HMI and Factory Talk VIEW.
S7 300, TIA V12, Basic plus 9 “DP panels as graphic Terminal.
Achievement:
Introduced new generation Siemens Numerical and protection relays for generator and plant protection.
Set up a new IEC 61850 protocols for all the Siemens relays which were integrated to PLC.
Extraction of ICD files from numerical relays and downloading to protocol converter which converts IEC 61850 to
Ethernet/IP and integrate to PLC to communicate on Ethernet media in power substation.
Created IEC stations for all the relays in the panel of the substation for accurate protection through DIGSI 4
software.
Programming of 7SR 10 and 11 Ground and earth fault Siemens relays introducing as per standards of IEC 60870
-5-101 and IEC 60870 -5-103 using MODBUS media on electrical RS 485.
Remote monitoring of electrical parameters from central load dispatch center in Latum using IEC 60870-5-103
on fiber optic on multi node form gateway.
Protocols Used:
IEC 61850- between numerical, protection relays to PLC. Converter used is Advantech gateway for IEC 61850 to
Ethernet/IP
IEC 60870 Modbus RTU for ground and earth fault relays to PLC’s.
Modbus TCP/IP between PAC 4200 relays to PLC using switch mode socket programming.
CAN for Frequency drives and motor direction control.
OPC Protocol from open Automation Software for Integrating Siemens plc’s to Factory talk view SCADA.
Company Name: ADECCO INDIA PVT LTD.
CLIENT:SIEMENS TECHNOLOGY SERVICES PVT LTD.
Duration: Aug 2013 to Nov 2014
Location: Bangalore
Client Profile: STS is a software development and R & D Company for Siemens AG. STS develops automated software for
all Siemens automation product such as TIA (Totally Integrated Automation software) and Win CC. TIA is integration of
Simatic PLC programming, HMI development software as well as SCADA development software, all these 3 are in-built in
TIA software, which is dependent on software license.
Designation: Engineer verification and validation/Senior test engineer (R&D)
Projects: TIA V11 SP1, SP2, TIA V12, TIA V12 Service pack 1
Current project: TIA V13 (Totally integrated automation)
End User: SIEMENS AG, Germany
Description: TIA is the totally integrated automation software from SIEMENS which combines PLC, HMI, SCADA and
other industrial automation software in one Package. Project version TIA V11, V12. For PLC/HMI devices is developed
and tested and released to market successfully. Now development and testing of version TIA V13 completed,
3. successfully released to market in 2 quarter of 2014, now TIA V13 HSP design and development is going on, which is
expected to release to market in last quarter 2014.
Responsibilities:
Working in Industrial automation software TIA (totally integrated automation).
Testing of Engineering stations and industrial runtime system.HMI, PLC ‘s
Testing HMI runtime system with s7200, s7300,s7400, s7 1200 ,s7 1500,logo plc’s
Creating a End-user environment in lab to check the HMI device stability, performance
System testing of HMI panels & PLCs using black box testing.
Hardware - software integration testing.
Multiple language configurations and testing.
Hardware Lab setup, configuration and maintenance for system testing team.
Testing of Industrial Communication like Ethernet IP, MPI, Serial, field bus, USB, Modbus CAN protocol.
Involving in Test strategy, Test planning, Test Estimation and Test Execution.
Test designs and Test formal & informal reviews of test cases,
Test case design, test case review as per requirements.
Mentoring, training and team handling.
Third party Communication driver testing with Siemens HMI panels.
Handling third party driver PLC like Omron, Modicon, Mitsubishi, AB plc’s
Preparation of Communication cables.
PLC testing, SCADA testing and configuration.
Design development of GUI(Graphical user interface)testing like end-users
PROFESSIONAL EXPERIENCE
Company Name: ASIAN PAINTS LTD
Duration: mar 2013 to Jul 2013
Location: Pune
Company Profile: 70 years of innovation in paint, since its foundation in 1942, Asian Paints has come a long way to
become India’s largest and Asia’s third largest paint company, with a turnover of Rs. 127.15 billion. Asian Paints operates
in 17 countries and has 23 paint manufacturing facilities in the world servicing consumers in over 65 countries.
Solving the logic for application given
Finding possible tools and getting prepared/trained for the new tools if any
Programming the logic in PLC and Designing HMI and/or SCADA
Testing with set up
Interfacing PLC/DCS with SCADA and/or HMI if required
Handling the set up with field instruments connectivity and modifying the design if required
Trouble shooting of the PLCs Memory, Connectivity and Program
Validation of PLCs along with team
Software development in FBD, Ladder Logic
Direct and coordinate manufacturing, construction, installation, maintenance, support, documentation, and
testing activities to ensure compliance with specifications, codes, and customer requirements.
Inspect completed installations and observe operations, to ensure conformance to design and equipment
specifications and compliance with operational and safety standards.
Also have good exposure on ABB DCS 800xa, Application development as per process requirement through FBD
language.
4. Working experience on ABB DCS PM 891 and design change as per requirements.
Company Name: SUZLON ENERGY LTD
Duration: Aug 2010 to Nov 2012
Location: Across INDIA
Company Profile: Established in 1995, today Suzlon Energy Ltd. is present in 19 countries across 6 continents.
We are one of the leading renewable energy solutions providers in the world. We have installed around 15.5 GW of
wind energy capacity globally. With a support network of over 7,500 employees of diverse nationalities, we house
one of the largest in-house Research and Development (R&D) set-up with facilities in Germany, the Netherlands,
Denmark and India.
Project Summary:
Corrective action to avoid non-conformance and reporting the same in conformity desk.
Planning & procurement of Tools & materials for smooth functioning of Project.
Troubleshooting of PLC, VFD, MFR, DCS control equipment.
Carrying out the modification work, maintain all the records of Breakdown and Spare consumption while pre-
commissioning.
Experience in different types pneumatic, electrical operated control valves.
Experience in trouble shouting of all type transmitters.
Calibration of different control loops like temperature, Pressure, level, flow etc.
Programming of control valve (make:-samson), pneumatic cylinders valve & sanitary remote controlled valve.
Integration and repair of different type of field inst. Like: - level switch, solenoid valve, air filter regulator.
Trouble shooting & commissioning of field instruments related to dcs & plc system & taking data backup.
Academics:
Completed B.E in Canara Engineering College, Mangalore, VTU Belgaum in Electronics and Communication and Secured
63 % in the year 2010.
Completed Pre University in Sarvodaya PU College, Tumkur in the stream of PCMB and Secured 53 % in the year 2005
Completed Higher Primary School in Siddaganga Composite School, Tumkur and secured 74 % in the year 2002.
Technical Competency:-
Post Graduation in Industrial Automation Course from Technocrat Automation Pvt Ltd. Chennai.
PLC’s - Allen Bradley (Micrologix, SLC 500 Series)
- Siemens (S7-200 & S7-300)
- GE Fanuc (Versamax)
- ABB (PM 856)
SCADA - Wonder ware (In touch Version 9.5), Win CC
Drives - ABB Drives (ACS 150)
DCS - ABB AC 800 F, Honeywell DM200
5. Hardware Skills:-
Knowledge of Hardware and Programming aspects of Siemens PLC Systems which includes S7-200, S7-
300 series.
Knowledge of Operations and Programming of Siemens HMI Systems
(Operator Interfaces).
Knowledge of Configuration and Operational aspects of Variable Frequency Drives, Compact Starter &
Soft starters, ET-200remote IO, AS&I Gateway.
Omron automation aspects like CP1E PLC & NV3Q HMI.
Advance CE Comfort touch panels and creating Run Time.
Industrial Software’s:-
SCADA Packages viz. WinCC of Siemens, Movicon-11, Intouch V8.0 of Wonder ware.
TIA(Total Integrated Automation) V12 and V13 version for HMI RT and S7 1200 and S7 1500 PLC’s
STEP7-Simatic Manager Package for Programming Siemens S7-300, S7 400 Series PLC System.
CX-Programmer of CP1E Omron PLC series.
HMI Package WinCC Flexible and NV Designer of Omron
Design Tools Eplan Electrical P8 & Auto CAD 2D, 3D.
IT Software Packages:
SAP ABAP EC 6.0,
C Language
SQL.
Personal Profile:-
Date of Birth : 08-Sep-1987
Sex : Male
Marital Status : Single
Nationality : Indian
Languages Known: Kannada, English, and Hindi
Passport No : K7144181
Declaration:-
Date:
Place: Bangalore yours faithfully,
Avinash H
6. Hardware Skills:-
Knowledge of Hardware and Programming aspects of Siemens PLC Systems which includes S7-200, S7-
300 series.
Knowledge of Operations and Programming of Siemens HMI Systems
(Operator Interfaces).
Knowledge of Configuration and Operational aspects of Variable Frequency Drives, Compact Starter &
Soft starters, ET-200remote IO, AS&I Gateway.
Omron automation aspects like CP1E PLC & NV3Q HMI.
Advance CE Comfort touch panels and creating Run Time.
Industrial Software’s:-
SCADA Packages viz. WinCC of Siemens, Movicon-11, Intouch V8.0 of Wonder ware.
TIA(Total Integrated Automation) V12 and V13 version for HMI RT and S7 1200 and S7 1500 PLC’s
STEP7-Simatic Manager Package for Programming Siemens S7-300, S7 400 Series PLC System.
CX-Programmer of CP1E Omron PLC series.
HMI Package WinCC Flexible and NV Designer of Omron
Design Tools Eplan Electrical P8 & Auto CAD 2D, 3D.
IT Software Packages:
SAP ABAP EC 6.0,
C Language
SQL.
Personal Profile:-
Date of Birth : 08-Sep-1987
Sex : Male
Marital Status : Single
Nationality : Indian
Languages Known: Kannada, English, and Hindi
Passport No : K7144181
Declaration:-
Date:
Place: Bangalore yours faithfully,
Avinash H