Research Inventy : International Journal of Engineering and Science
Research Inventy : International Journal of Engineering and Science is published by the group of young academic and industrial researchers with 12 Issues per year. It is an online as well as print version open access journal that provides rapid publication (monthly) of articles in all areas of the subject such as: civil, mechanical, chemical, electronic and computer engineering as well as production and information technology. The Journal welcomes the submission of manuscripts that meet the general criteria of significance and scientific excellence. Papers will be published by rapid process within 20 days after acceptance and peer review process takes only 7 days. All articles published in Research Inventy will be peer-reviewed
AMTR: THE ANT BASED QOS AWARE MULTIPATH TEMPORALLY ORDERED ROUTING ALGORITHM ...cscpconf
Mobile Ad hoc networks (MANETs) are self organized by a collection of mobile nodes, which are interconnected by multi hop wireless paths. Providing QoS support in MANETs is an active research area, basically for supporting real time applications that are based upon interaction between the routing scheme and QoS provisioning. The goal of QoS aware routing is to achieve more deterministic behavior of the network i.e. a stable path, so that information carried by the network can be delivered in an uninterrupted fashion and for better resource utilization. In this paper we have developed AMTR, a new ant based QoS aware on-demand multipath routing algorithm for MANETs with better route failure management and which will be highly adaptive and energy efficient.
Amtr the ant based qos aware multipath temporally ordered routing algorithm ...csandit
Mobile Ad hoc networks (MANETs) are self organized by a collection of mobile nodes, which
are interconnected by multi hop wireless paths. Providing QoS support in MANETs is an active
research area, basically for supporting real time applications that are based upon interaction
between the routing scheme and QoS provisioning. The goal of QoS aware routing is to achieve
more deterministic behavior of the network i.e. a stable path, so that information carried by the
network can be delivered in an uninterrupted fashion and for better resource utilization. In this
paper we have developed AMTR, a new ant based QoS aware on-demand multipath routing
algorithm for MANETs with better route failure management and which will be highly adaptive
and energy efficient.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Authentication of Secure Data Transmission In Wireless RoutingIJERA Editor
The major objective of our work is to explore a security enhanced dynamic routing algorithm based on distributed routing information widely supported in existing wired and wireless networks. The message authentication is the main area to be considered in WSN’s. Most of the wireless networks are attacked for detecting the data’s that are transmitted in between the users. We aim at the randomization of delivery paths for data transmission to provide considerably small path similarity (i.e., the number of common links between two delivery paths) of two consecutive transmitted packets. The proposed algorithm should be easy to implement and compatible with popular routing protocols, such as the Routing Information Protocol (RIP) for wired networks and Destination-Sequenced Distance Vector (DSDV) protocol for wireless networks over existing infrastructures. These protocols shall not increase the number of control messages if the proposed algorithm is adopted. An analytic study will be presented for the proposed routing algorithm, and a series of simulation study will be conducted to verify the analytic results and to show the capability of the proposed algorithm.
Solving QoS multicast routing problem using ACO algorithmAbdullaziz Tagawy
Many Internet multicast applications have stringent Quality-of-Service (QoS) requirements that include delay, loss rate, bandwidth, and delay jitter. In this paper, we present a Swarm intelligence based on Ant Colony Optimization (ACO) technique to optimize the multicast tree
Improving Capacity and Load Distribution of a Node Using Circular Sailing Rou...ijafrc
Routing in wireless networks has been heavily studied in the last decade. In mobile ad-hoc network (MANETs) can route travelled by a packet from the source to the destination usually consists of multiple hops where intermediate nodes act as relays. The packets usually follow the shortest path between source and destination in routing protocols to achieve smallest travelled distance. However, this leads to the uneven distribution of traffic load in a network. The wireless nodes in the center of the network will have heavier traffic. Since most of the shortest routes go through them. There are many algorithms available in the load balancing and improving capacity technique. In this paper, describe a novel routing algorithm called Circular Sailing Routing (CSR), which we can distribute the traffic more evenly in the network. Based on our study, found to reduced traffic distribution and capacity of a node in the wireless network compared to any other algorithm. This is because they proposed maps in the network onto a sphere via a simple stereographic projection and then the route decision is made by the distance on the sphere instead of Euclidean distance in the plane.
AMTR: THE ANT BASED QOS AWARE MULTIPATH TEMPORALLY ORDERED ROUTING ALGORITHM ...cscpconf
Mobile Ad hoc networks (MANETs) are self organized by a collection of mobile nodes, which are interconnected by multi hop wireless paths. Providing QoS support in MANETs is an active research area, basically for supporting real time applications that are based upon interaction between the routing scheme and QoS provisioning. The goal of QoS aware routing is to achieve more deterministic behavior of the network i.e. a stable path, so that information carried by the network can be delivered in an uninterrupted fashion and for better resource utilization. In this paper we have developed AMTR, a new ant based QoS aware on-demand multipath routing algorithm for MANETs with better route failure management and which will be highly adaptive and energy efficient.
Amtr the ant based qos aware multipath temporally ordered routing algorithm ...csandit
Mobile Ad hoc networks (MANETs) are self organized by a collection of mobile nodes, which
are interconnected by multi hop wireless paths. Providing QoS support in MANETs is an active
research area, basically for supporting real time applications that are based upon interaction
between the routing scheme and QoS provisioning. The goal of QoS aware routing is to achieve
more deterministic behavior of the network i.e. a stable path, so that information carried by the
network can be delivered in an uninterrupted fashion and for better resource utilization. In this
paper we have developed AMTR, a new ant based QoS aware on-demand multipath routing
algorithm for MANETs with better route failure management and which will be highly adaptive
and energy efficient.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Authentication of Secure Data Transmission In Wireless RoutingIJERA Editor
The major objective of our work is to explore a security enhanced dynamic routing algorithm based on distributed routing information widely supported in existing wired and wireless networks. The message authentication is the main area to be considered in WSN’s. Most of the wireless networks are attacked for detecting the data’s that are transmitted in between the users. We aim at the randomization of delivery paths for data transmission to provide considerably small path similarity (i.e., the number of common links between two delivery paths) of two consecutive transmitted packets. The proposed algorithm should be easy to implement and compatible with popular routing protocols, such as the Routing Information Protocol (RIP) for wired networks and Destination-Sequenced Distance Vector (DSDV) protocol for wireless networks over existing infrastructures. These protocols shall not increase the number of control messages if the proposed algorithm is adopted. An analytic study will be presented for the proposed routing algorithm, and a series of simulation study will be conducted to verify the analytic results and to show the capability of the proposed algorithm.
Solving QoS multicast routing problem using ACO algorithmAbdullaziz Tagawy
Many Internet multicast applications have stringent Quality-of-Service (QoS) requirements that include delay, loss rate, bandwidth, and delay jitter. In this paper, we present a Swarm intelligence based on Ant Colony Optimization (ACO) technique to optimize the multicast tree
Improving Capacity and Load Distribution of a Node Using Circular Sailing Rou...ijafrc
Routing in wireless networks has been heavily studied in the last decade. In mobile ad-hoc network (MANETs) can route travelled by a packet from the source to the destination usually consists of multiple hops where intermediate nodes act as relays. The packets usually follow the shortest path between source and destination in routing protocols to achieve smallest travelled distance. However, this leads to the uneven distribution of traffic load in a network. The wireless nodes in the center of the network will have heavier traffic. Since most of the shortest routes go through them. There are many algorithms available in the load balancing and improving capacity technique. In this paper, describe a novel routing algorithm called Circular Sailing Routing (CSR), which we can distribute the traffic more evenly in the network. Based on our study, found to reduced traffic distribution and capacity of a node in the wireless network compared to any other algorithm. This is because they proposed maps in the network onto a sphere via a simple stereographic projection and then the route decision is made by the distance on the sphere instead of Euclidean distance in the plane.
M-EPAR to Improve the Quality of the MANETsIJERA Editor
In MANET, power aware is important challenge issue to improve the communication energy efficiency at individual nodes. We propose modified efficient power aware routing (M-EPAR), a new power aware routing protocol that increases the network lifetime of MANET. Designing a power aware routing algorithm or technique is one of the most important point considered in Mobile Ad Hoc Networks. These nodes are driven by reactive protocols where broadcasting is mandatory to form a path between two nodes. So in case of death of the node resulting out of less battery calls for re-routing. Since many existing techniques focuses on energy aware routing this paper presents combination of energy aware routing merged with link quality determined by packet drop rate. The proposed scheme has outperformed the existing technique in terms of packet delivery ratio, throughput and energy consumption.
AN MINIMUM RECONFIGURATION PROBABILITY ROUTING ALGORITHM FOR RWA IN ALL-OPTIC...sipij
In this paper, we present a detailed study of Minimum Reconfiguration Probability Routing (MRPR) algorithm, and its performance evaluation in comparison with Adaptive unconstrained routing (AUR) and Least Loaded routing (LLR) algorithms. We have minimized the effects of failures on link and router failure in the network under changing load conditions, we assess the probability of service and number of light path failures due to link or route failure on Wavelength Interchange(WI) network. The computation complexity is reduced by using Kalman Filter(KF) techniques. The minimum reconfiguration probability
routing (MRPR) algorithm selects most reliable routes and assign wavelengths to connections in a manner that utilizes the light path(LP) established efficiently considering all possible requests.
Performance Analysis of Enhanced Opportunistic Minimum Cost Routingin Mobile ...IJERA Editor
Mobile Ad-Hoc Network (MANET) is a collection of wireless mobile nodes forming a temporary network with
infrastructure less environment to establish a data transmission between nodes within the network. A routing
protocol is used to discover routes between nodes. In this paper, we study the three existing routing protocols
namely AODV, DSDV and DSR to analyze theirperformance based on set of parameters.AODV and DSR
deliver almost all the packets compared to DSDV. Hence we try to modify the AODVprotocol and use in the
cooperative transmission.
In this paper, we study the cooperative transmission at the network layer and cooperative diversity at the
physical layer as a joint optimization of the transmission power in a Mobile Ad-Hoc Network (MANET) with
static channel. However due to variable wireless channels static routing is suboptimal. Proposed protocol
proactively selects forwarding nodes that work cooperatively forwarding the packet towards the destination.
Cooperative transmission side diversity helps in reducing interference. Diversity can be achieved at the physical
layer by coordinating the multiple nodes. Nodes are equipped with Omni-directional antenna and take the
advantages of transmission side diversity to achieve energy saving, under the assumption that channel gains are
available at the transmitters.
The proposed Opportunistic Minimum Cost Cooperative Transmission Shortest Path (OMCTSP) algorithms
select the best optimum route with minimum cost in terms of energy, number of hops, available bandwidth, link
quality (SNR) and outage probability. As the network becomes larger, finding optimal routes becomes
computationally intractable as the complexity of the dynamic programming (DP) approach increases as o (22n)
where n is the number of nodes in the networks. Hence we develop two suboptimal algorithms have complexity
of o (n2) perform as same as optimal algorithm. Also developthe Opportunistic Cooperative Routing in MANET
(O_CORMAN), which is a network layer opportunistic routing scheme for mobile ad hoc networks. Nodes in
the network use the components proactive routing protocol, forwarder list update and local re-transmission. We
evaluate the performance using NS 2.32 simulator there is significant performance improvement with respect to
energy, throughput packet delivery, and delay compared with Modified AODV (OMCTSP).
MPC-EAR : Maximal Power Conserved And Energy Aware Routing in Ad hoc Networksijsrd.com
Power preservation in wireless ad hoc networks is a decisive factor as energy resources are inadequate at the electronic devices in use. Power-aware routing strategies are fundamentally route selection strategies built on accessible ad hoc routing protocols. This paper proposed a new Maximal Power Conserved And Energy Aware Routing (MPC-EAR ) topology for mobile ad hoc networks that enhances the network life span. Simulation results prove that the projected protocol has a higher performance other minimal energy usage, energy level aware and energy conserving routing protocols such as MTPR, MMECR and CMMECR.
A novel hierarchical ant based qos aware intelligent routing scheme for manetsIJCNCJournal
MANET is a collection of mobile devices with no centralized control and no pre-existing infrastructures.
Due to the nodal mobility, supporting QoS during routing in this type of networks is a very challenging
task. To tackle this type of overhead many routing algorithms with clustering approach have been
proposed. Clustering is an effective method for resource management regarding network performance,
routing protocol design, QoS etc. Most of the flat network architecture contains homogeneous capacity of
nodes but in real time nodes are with heterogeneous capacity and transmission power. Hierarchical
routing provides routing through this kind of heterogeneous nodes. Here, routes can be recorded
hierarchically, across clusters to increase routing flexibility. Besides this, it increases scalability and
robustness of routes. In this paper, a novel ant based QoS aware routing is proposed on a three level
hierarchical cluster based topology in MANET which will be more scalable and efficient compared to flat
architecture and will give better throughput.
4 ijaems jan-2016-8-performance analysis of mixed line rate optical wdm netwo...INFOGAIN PUBLICATION
Due to heterogeneous traffic in next generation Mixed Line Rate (MLR) networks are capable of delivering different bandwidth in a flexible manner. In this paper a simple routing algorithm is proposed to study the case of any link failure in MLR WDM networks. Here Poisson random traffic is used as a dynamic traffic for 24-hour duration. The proposed work can be achieved by deleting the failed link and then finding the new best possible shortest path between source and destination node. According to the traffic load light paths adjustments employ the addition of light paths under congestion and deletion of lightpaths which are not being used at a particular time. Simulation result shows the total number of lightpaths used, total number of addition and deletion of light paths under link safe and link failure case in mixed line rate (MLR) and single line rate (SLR) optical WDM networks.
Efficient Utilization of Bandwidth in Location Aided RoutingIOSR Journals
Abstract : Earlier work on routing MANETs developed several routing protocols, which finds available route from source to destination without taking into the consideration of Band width availability for data transfer, and they frequently fails to discover stable routes between source and destination. As a result of that there is a large numbers of discarding of data packets as well as overloading of packets as the consequences of that large wastage of band width. EUBLAR (Efficient Utilization of band width in Location Aided Routing) protocol is introduced in this proposed work, which is capable of calculating the available band width of all the intermediate nodes between source and destination. In this proposed protocol find the minimum available band width of all the intermediate nodes between source and destination and then according to that band width sends the data packets over that path. The EUBLAR can effectively utilized the wastage of band width and every single band width can be used for data transfer can be used over entirely configured network. In this way we can increase the quality of service of the Ad- hoc network in terms of bandwidth. Keywords: Ad Hoc Networks, Global Positioning System, Maximum & Minimum slopes, Minimum available Bandwidth, Time to Live
Determining the Optimum Number of Paths for Realization of Multi-path Routing...TELKOMNIKA JOURNAL
Multi-Protocol Label Switching for Traffic Engineering (MPLS-TE) technology is an intelligent and
advanced tool for handling traffic through the core networks and implementing new services based on
virtual transport. Since MPLS-TE combines channel and network layer mechanisms, network
administrators can optimally integrate and allocate the traffic loads while maintaining the speed of
technologies such as Asynchronous Transfer Mode (ATM) technology. In this paper, the problem of the
developed algorithm of multi-path routing which allows us to determine the optimum number of
independent shortest paths is theoretically solved. In details, the article proposes a way for finding the set
of shortest paths using Dijkstra's algorithm, and then determination of the maximum flow for each of the
shortest paths based on the mathematical concepts and finally, introducing the solution of the multi-criteria
optimization problem for a set of shortest paths. According to our approach, optimizing the use of
resources in the core networks is possible with using the MPLS-TE technology.
Performance Analysis for Parallel MRA in Heterogeneous Wireless NetworksEditor IJCATR
This paper analysis a different methods to find optimal path for services and power allocation to heterogeneous wireless network. Under heterogeneous wireless networks, a user can send data through a single or multi RATs (Radio Access Technology) simultaneously. The objective of this paper is to choose the optimal path for the services and power allocation to that bandwidth (BW) distributed joint allocation algorithm using Newton and modified Newton are adopted and the total system capacity compared. The analysis is done in Matlab and simulation results are compared. The numerical result shows that compare to Newton method, modified Newton method maximize the total system capacity.
Performance of cluster-based cognitive multihop networks under joint impact o...TELKOMNIKA JOURNAL
In this paper, we evaluate outage probability (OP) of a cluster-based multi-hop protocol operating
on an underlay cognitive radio (CR) mode. The primary network consists of multiple independent
transmit/receive pairs, and the primary transmitters seriously cause co-channel interference (CCI) to the
secondary receivers. To improve the outage performance for the secondary network under the joint impact
of the CCI and hardware imperfection, we employ the best relay selection at each hop. Moreover, the
destination is equipped with multiple antennas and uses the selection combining (SC) technique to
enhance the reliability of the data transmission at the last hop. For performance evaluation, we first derive
an exact formula of OP for the primary network which is used to calculate the transmit power of the
secondary transmitters. Next, an exact closed-form expression of the end-to-end OP for the secondary
network is derived over Rayleigh fading channels. We then perform Monte-Carlo simulations to validate
the derivations. The results present that the CCI caused by the primary operations significantly impacts on
the outage performance of the secondary network.
Solving bandwidth guaranteed routing problem using routing dataIJCNCJournal
This paper introduces a traffic engineering routing algorithm that aims to accept as many routing demands
as possible on the condition that a certain amount of bandwidth resource is reserved for each accepted
demand. The novel idea is to select routes based on not only network states but also information derived
from routing data such as probabilities of the ingress egress pairs and usage frequencies of the links.
Experiments with respect to acceptance ratio and computation time have been conducted against various
test sets. Results indicate that the proposed algorithm has better performance than the existing popular algorithms including Minimum Interference Routing Algorithm (MIRA) and Random Race based Algorithm for Traffic Engineering (RRATE)
.
International Journal of Computational Engineering Research(IJCER)ijceronline
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
M-EPAR to Improve the Quality of the MANETsIJERA Editor
In MANET, power aware is important challenge issue to improve the communication energy efficiency at individual nodes. We propose modified efficient power aware routing (M-EPAR), a new power aware routing protocol that increases the network lifetime of MANET. Designing a power aware routing algorithm or technique is one of the most important point considered in Mobile Ad Hoc Networks. These nodes are driven by reactive protocols where broadcasting is mandatory to form a path between two nodes. So in case of death of the node resulting out of less battery calls for re-routing. Since many existing techniques focuses on energy aware routing this paper presents combination of energy aware routing merged with link quality determined by packet drop rate. The proposed scheme has outperformed the existing technique in terms of packet delivery ratio, throughput and energy consumption.
AN MINIMUM RECONFIGURATION PROBABILITY ROUTING ALGORITHM FOR RWA IN ALL-OPTIC...sipij
In this paper, we present a detailed study of Minimum Reconfiguration Probability Routing (MRPR) algorithm, and its performance evaluation in comparison with Adaptive unconstrained routing (AUR) and Least Loaded routing (LLR) algorithms. We have minimized the effects of failures on link and router failure in the network under changing load conditions, we assess the probability of service and number of light path failures due to link or route failure on Wavelength Interchange(WI) network. The computation complexity is reduced by using Kalman Filter(KF) techniques. The minimum reconfiguration probability
routing (MRPR) algorithm selects most reliable routes and assign wavelengths to connections in a manner that utilizes the light path(LP) established efficiently considering all possible requests.
Performance Analysis of Enhanced Opportunistic Minimum Cost Routingin Mobile ...IJERA Editor
Mobile Ad-Hoc Network (MANET) is a collection of wireless mobile nodes forming a temporary network with
infrastructure less environment to establish a data transmission between nodes within the network. A routing
protocol is used to discover routes between nodes. In this paper, we study the three existing routing protocols
namely AODV, DSDV and DSR to analyze theirperformance based on set of parameters.AODV and DSR
deliver almost all the packets compared to DSDV. Hence we try to modify the AODVprotocol and use in the
cooperative transmission.
In this paper, we study the cooperative transmission at the network layer and cooperative diversity at the
physical layer as a joint optimization of the transmission power in a Mobile Ad-Hoc Network (MANET) with
static channel. However due to variable wireless channels static routing is suboptimal. Proposed protocol
proactively selects forwarding nodes that work cooperatively forwarding the packet towards the destination.
Cooperative transmission side diversity helps in reducing interference. Diversity can be achieved at the physical
layer by coordinating the multiple nodes. Nodes are equipped with Omni-directional antenna and take the
advantages of transmission side diversity to achieve energy saving, under the assumption that channel gains are
available at the transmitters.
The proposed Opportunistic Minimum Cost Cooperative Transmission Shortest Path (OMCTSP) algorithms
select the best optimum route with minimum cost in terms of energy, number of hops, available bandwidth, link
quality (SNR) and outage probability. As the network becomes larger, finding optimal routes becomes
computationally intractable as the complexity of the dynamic programming (DP) approach increases as o (22n)
where n is the number of nodes in the networks. Hence we develop two suboptimal algorithms have complexity
of o (n2) perform as same as optimal algorithm. Also developthe Opportunistic Cooperative Routing in MANET
(O_CORMAN), which is a network layer opportunistic routing scheme for mobile ad hoc networks. Nodes in
the network use the components proactive routing protocol, forwarder list update and local re-transmission. We
evaluate the performance using NS 2.32 simulator there is significant performance improvement with respect to
energy, throughput packet delivery, and delay compared with Modified AODV (OMCTSP).
MPC-EAR : Maximal Power Conserved And Energy Aware Routing in Ad hoc Networksijsrd.com
Power preservation in wireless ad hoc networks is a decisive factor as energy resources are inadequate at the electronic devices in use. Power-aware routing strategies are fundamentally route selection strategies built on accessible ad hoc routing protocols. This paper proposed a new Maximal Power Conserved And Energy Aware Routing (MPC-EAR ) topology for mobile ad hoc networks that enhances the network life span. Simulation results prove that the projected protocol has a higher performance other minimal energy usage, energy level aware and energy conserving routing protocols such as MTPR, MMECR and CMMECR.
A novel hierarchical ant based qos aware intelligent routing scheme for manetsIJCNCJournal
MANET is a collection of mobile devices with no centralized control and no pre-existing infrastructures.
Due to the nodal mobility, supporting QoS during routing in this type of networks is a very challenging
task. To tackle this type of overhead many routing algorithms with clustering approach have been
proposed. Clustering is an effective method for resource management regarding network performance,
routing protocol design, QoS etc. Most of the flat network architecture contains homogeneous capacity of
nodes but in real time nodes are with heterogeneous capacity and transmission power. Hierarchical
routing provides routing through this kind of heterogeneous nodes. Here, routes can be recorded
hierarchically, across clusters to increase routing flexibility. Besides this, it increases scalability and
robustness of routes. In this paper, a novel ant based QoS aware routing is proposed on a three level
hierarchical cluster based topology in MANET which will be more scalable and efficient compared to flat
architecture and will give better throughput.
4 ijaems jan-2016-8-performance analysis of mixed line rate optical wdm netwo...INFOGAIN PUBLICATION
Due to heterogeneous traffic in next generation Mixed Line Rate (MLR) networks are capable of delivering different bandwidth in a flexible manner. In this paper a simple routing algorithm is proposed to study the case of any link failure in MLR WDM networks. Here Poisson random traffic is used as a dynamic traffic for 24-hour duration. The proposed work can be achieved by deleting the failed link and then finding the new best possible shortest path between source and destination node. According to the traffic load light paths adjustments employ the addition of light paths under congestion and deletion of lightpaths which are not being used at a particular time. Simulation result shows the total number of lightpaths used, total number of addition and deletion of light paths under link safe and link failure case in mixed line rate (MLR) and single line rate (SLR) optical WDM networks.
Efficient Utilization of Bandwidth in Location Aided RoutingIOSR Journals
Abstract : Earlier work on routing MANETs developed several routing protocols, which finds available route from source to destination without taking into the consideration of Band width availability for data transfer, and they frequently fails to discover stable routes between source and destination. As a result of that there is a large numbers of discarding of data packets as well as overloading of packets as the consequences of that large wastage of band width. EUBLAR (Efficient Utilization of band width in Location Aided Routing) protocol is introduced in this proposed work, which is capable of calculating the available band width of all the intermediate nodes between source and destination. In this proposed protocol find the minimum available band width of all the intermediate nodes between source and destination and then according to that band width sends the data packets over that path. The EUBLAR can effectively utilized the wastage of band width and every single band width can be used for data transfer can be used over entirely configured network. In this way we can increase the quality of service of the Ad- hoc network in terms of bandwidth. Keywords: Ad Hoc Networks, Global Positioning System, Maximum & Minimum slopes, Minimum available Bandwidth, Time to Live
Determining the Optimum Number of Paths for Realization of Multi-path Routing...TELKOMNIKA JOURNAL
Multi-Protocol Label Switching for Traffic Engineering (MPLS-TE) technology is an intelligent and
advanced tool for handling traffic through the core networks and implementing new services based on
virtual transport. Since MPLS-TE combines channel and network layer mechanisms, network
administrators can optimally integrate and allocate the traffic loads while maintaining the speed of
technologies such as Asynchronous Transfer Mode (ATM) technology. In this paper, the problem of the
developed algorithm of multi-path routing which allows us to determine the optimum number of
independent shortest paths is theoretically solved. In details, the article proposes a way for finding the set
of shortest paths using Dijkstra's algorithm, and then determination of the maximum flow for each of the
shortest paths based on the mathematical concepts and finally, introducing the solution of the multi-criteria
optimization problem for a set of shortest paths. According to our approach, optimizing the use of
resources in the core networks is possible with using the MPLS-TE technology.
Performance Analysis for Parallel MRA in Heterogeneous Wireless NetworksEditor IJCATR
This paper analysis a different methods to find optimal path for services and power allocation to heterogeneous wireless network. Under heterogeneous wireless networks, a user can send data through a single or multi RATs (Radio Access Technology) simultaneously. The objective of this paper is to choose the optimal path for the services and power allocation to that bandwidth (BW) distributed joint allocation algorithm using Newton and modified Newton are adopted and the total system capacity compared. The analysis is done in Matlab and simulation results are compared. The numerical result shows that compare to Newton method, modified Newton method maximize the total system capacity.
Performance of cluster-based cognitive multihop networks under joint impact o...TELKOMNIKA JOURNAL
In this paper, we evaluate outage probability (OP) of a cluster-based multi-hop protocol operating
on an underlay cognitive radio (CR) mode. The primary network consists of multiple independent
transmit/receive pairs, and the primary transmitters seriously cause co-channel interference (CCI) to the
secondary receivers. To improve the outage performance for the secondary network under the joint impact
of the CCI and hardware imperfection, we employ the best relay selection at each hop. Moreover, the
destination is equipped with multiple antennas and uses the selection combining (SC) technique to
enhance the reliability of the data transmission at the last hop. For performance evaluation, we first derive
an exact formula of OP for the primary network which is used to calculate the transmit power of the
secondary transmitters. Next, an exact closed-form expression of the end-to-end OP for the secondary
network is derived over Rayleigh fading channels. We then perform Monte-Carlo simulations to validate
the derivations. The results present that the CCI caused by the primary operations significantly impacts on
the outage performance of the secondary network.
Solving bandwidth guaranteed routing problem using routing dataIJCNCJournal
This paper introduces a traffic engineering routing algorithm that aims to accept as many routing demands
as possible on the condition that a certain amount of bandwidth resource is reserved for each accepted
demand. The novel idea is to select routes based on not only network states but also information derived
from routing data such as probabilities of the ingress egress pairs and usage frequencies of the links.
Experiments with respect to acceptance ratio and computation time have been conducted against various
test sets. Results indicate that the proposed algorithm has better performance than the existing popular algorithms including Minimum Interference Routing Algorithm (MIRA) and Random Race based Algorithm for Traffic Engineering (RRATE)
.
International Journal of Computational Engineering Research(IJCER)ijceronline
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
Fuzzy Controller Based Stable Routes with Lifetime Prediction in MANETsCSCJournals
In ad hoc networks, the nodes are dynamically and arbitrary located in a manner that the interconnections between nodes are changing frequently. Thus, designing an effective routing protocol is a critical issue. In this paper, we propose a fuzzy based routing method that selects the most stable route (FSRS) considering the number of intermediate nodes, packet queue occupancy, and internodes distances. Also it takes the produced cost of the selected route as an input to another fuzzy controller predicts its lifetime (FRLP), the evaluation of the proposed method is performed using OMNet++4.0 simulator in terms of packet delivery ratio, average end-to-end delay and normalized routing load.
Ant Colony Optimization Based Energy Efficient on-Demand Multipath Routing Sc...ijsrd.com
Reliable transmission has become one of the major aspects of a wireless sensor network. The current paper provides an Ant Colony Optimization based method for providing multi path routes. These routes are provided on-demand, hence they can be used in any dynamic system. The advantage of this system is that it can provide near optimal results within the stipulated time.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Qo s oriented distributed routing protocols : anna university 2nd review pptAAKASH S
To find a QoS path between source and destination, Which satisfies
The QoS requirements for each admitted connection and
Optimizes the use of network resources
Quality encompasses the data loss, latency, jitter, efficient use of network resources,..
QoS mechanisms for unfairness: managing queuing behavior, shaping traffic, control admission, routing, …
Usually, a hybrid network has widespread base stations
The data transmission in hybrid networks has two features:
An AP can be a source or a destination to any mobile node
It allows a stream to have anycast transmission along multiple transmission paths to its destination through base stations
The number of transmission hops between a mobile node and an AP is small
It enables a source node to connect to an AP through an intermediate node
In this paper introduce the QoS-Oriented Distributed routing protocol(QOD)
This QOD protocol makes five contributions:
QoS-guaranteed neighbor selection algorithm
Distributed packet scheduling algorithm
Mobility-based segment resizing algorithm
Soft-deadline based forwarding scheduling algorithm
Data redundancy elimination based transmission
Performance Analysis of Enhanced Opportunistic Minimum Cost Routingin Mobile ...IJERA Editor
Mobile Ad-Hoc Network (MANET) is a collection of wireless mobile nodes forming a temporary network with
infrastructure less environment to establish a data transmission between nodes within the network. A routing
protocol is used to discover routes between nodes. In this paper, we study the three existing routing protocols
namely AODV, DSDV and DSR to analyze theirperformance based on set of parameters.AODV and DSR
deliver almost all the packets compared to DSDV. Hence we try to modify the AODVprotocol and use in the
cooperative transmission.
In this paper, we study the cooperative transmission at the network layer and cooperative diversity at the
physical layer as a joint optimization of the transmission power in a Mobile Ad-Hoc Network (MANET) with
static channel. However due to variable wireless channels static routing is suboptimal. Proposed protocol
proactively selects forwarding nodes that work cooperatively forwarding the packet towards the destination.
Cooperative transmission side diversity helps in reducing interference. Diversity can be achieved at the physical
layer by coordinating the multiple nodes. Nodes are equipped with Omni-directional antenna and take the
advantages of transmission side diversity to achieve energy saving, under the assumption that channel gains are
available at the transmitters.
The proposed Opportunistic Minimum Cost Cooperative Transmission Shortest Path (OMCTSP) algorithms
select the best optimum route with minimum cost in terms of energy, number of hops, available bandwidth, link
quality (SNR) and outage probability. As the network becomes larger, finding optimal routes becomes
computationally intractable as the complexity of the dynamic programming (DP) approach increases as o (2
2n)
where n is the number of nodes in the networks. Hence we develop two suboptimal algorithms have complexity
of o (n2) perform as same as optimal algorithm. Also developthe Opportunistic Cooperative Routing in MANET
(O_CORMAN), which is a network layer opportunistic routing scheme for mobile ad hoc networks. Nodes in
the network use the components proactive routing protocol, forwarder list update and local re-transmission. We
evaluate the performance using NS 2.32 simulator there is significant performance improvement with respect to
energy, throughput packet delivery, and delay compared with Modified AODV (OMCTSP).
Survey on Routing in Opportunistic Networks
this paper basically overviews and disused those potential methods and Techniques to select next hop to forward the packets (message) to destination.
Modified Headfirst Sliding Routing: A Time-Based Routing Scheme for Bus-Nochy...IJERA Editor
Several interesting topologies emerge by incorporating the third dimension in networks-on-chip (NoC). The Network-on-Chip (NoC) is Network-version of System on-Chip (SoC) means that on-chip communication is done through packet based networks. In NOC topology, routing algorithm and switching are main terminology .The routing algorithm is one of the key factor in NOC architecture. The routing algorithm, which defines as the path taken by a packet between the source and the destination. A good routing algorithm is necessary to improve the network performance. . Here we are proposing a new architecture to improve the throughput and latency of the network. In the proposed approach we are using a fixed path for the packet to transmit from source to destination
IMPROVED NETWORK CONNECTIVITY IN MANETSIJCNCJournal
The growth in wireless communication technologies has resulted in a considerable amount of
attention given to mobile adhoc networks. All mobile hosts in an adhoc network are embedded with
packet forwarding capabilities. It is decentralized and is independent of infrastructure. Since mobile
hosts in an adhoc network usually move freely, the topology of the network changes dynamically and
disconnection occurs frequently. These characteristics require the routing protocols to find an
alternative path towards the destination for data transfer. The existing on-demand routing protocols
does the alternative path establishment only after the disconnection of links in the existing path. The
data sent by the source during alternate path establishment period will be lost leading to incomplete
data transfer. The network traffic will therefore increase considerably. This problem can be overcome
by establishing an alternative path when the existing path is more likely to be broken, by sending a
warning message to the source indicating the likelihood of disconnection. In this paper an attempt has
been made to analyze a protocol that improves the network connectivity by preempting the alternative
path before the existing link gets failed by monitoring the signal strength and ‘age of the path’.
A Fast Convergence and Quick Route Updates Based Energy Aware Tree-Based Rout...iosrjce
IOSR Journal of Computer Engineering (IOSR-JCE) is a double blind peer reviewed International Journal that provides rapid publication (within a month) of articles in all areas of computer engineering and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in computer technology. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
Multiple optimal path identification using ant colony optimisation in wireles...ijwmn
Wireless Sensor Network WSN is tightly constrained for resources like energy, computational power and
memory. Many applications of WSN require to communicate sensitive information at sensor nodes SN to
Base station BS. The basic performance of WSN depends upon the path length and numbers of nodes in the
path by which data is forwarded to BS. In this paper we present bio-inspired Ant Colony Optimisation ACO
algorithm for Optimal Path Identification OPI for packet transmission to communicate between SN to BS.
Our modified algorithm OPI using ACO is base-station driven which considers the path length and the
number of hops in path for data packet transmission. This modified algorithm finds optimal path OP as
well as several suboptimal paths between SN & BS which are useful for effective communication.
Experimental Investigation of a Household Refrigerator Using Evaporative-Cool...inventy
The objective of this paper was to investigate experimentally the effect of Evaporative-cooled condenser in a household refrigerator. The experiment was done using HCF134a as the refrigerant. The performance of the household refrigerator with air-cooled and Evaporative-cooled condenser was compared for different load conditions. The results indicate that the refrigerator performance had improved when evaporative-cooled condenser was used instead of air-cooled condenser on all load conditions. Evaporativecooled condenser reduced the energy consumption when compared with the air-cooled condenser. There was also an enhancement in coefficient of performance (COP) when evaporative-cooled condenser was used instead of air-cooled condenser. The Evaporative cooled heat exchanger was designed and the system was modified by retrofitting it, instead of the conventional air-cooled condenser by making drop wise condensation using water and forced circulation over the condenser. From the experimental analysis it is observed that the COP of evaporative cooled system increased by 13.44% compared to that of air cooled system. So the overall efficiency and refrigerating effect is increased. In minimum constructional, maintenance and running cost, the system is much useful for domestic purpose. This study also revealed that combining a evaporative cooled system along with conventional water cooled system under the condition that the defrost water obtained from the freezer is used for drop wise condensation over condenser and water cooled condensation of the condenser at the bottom using remaining defrost water would reduce the power consumption, work done and hence further increase in refrigerating effect of the system. The study has shown that such a system is technically feasible and economically viable
Copper Strip Corrossion Test in Various Aviation Fuelsinventy
This research work takes in to account of corrosiveness test on various aviation fuels in the state of Telengana (India). The purpose of this experiment is to determine the corrosiveness test of fuels. This determination will be accomplished by using copper strip corrosion test by using the copper strip experiment we can determine the corrosive property of the fuel and hence the efficiency of fuel. The research covers the importance of knowing the corrosive property of different petroleum fuels including aviation turbine fuel.
Additional Conservation Laws for Two-Velocity Hydrodynamics Equations with th...inventy
A series of the differential identities connecting velocities, pressure and body force in the twovelocity hydrodynamics equations with equilibrium of pressure phases in reversible hydrodynamic approximation is obtaned.
Comparative Study of the Quality of Life, Quality of Work Life and Organisati...inventy
People’s lives are increasingly centred on work; they spend at least one-third of their time within the organisations that employ them. Investigating the factors that interfere with employees’ well-being and the organisational environment is becoming an increasing concern in organisations. This article identifies the criteria of the quality of life (QoL), quality of working life (QWL) and organisational climate instruments to point out their similarities. For bibliographic construction and data research, articles were sought in national and international journals, books and dissertations/articles in SciELO, Science Direct, Medline and Pub Med databases. The results show direct relationships amongst QoL, QWL and organisational climate instruments. The relationship between QoL and QWL instruments is based on fair compensation, social interaction, organisational communication, working conditions and functional capacity. QWL and organisational climate instruments are related through social interaction and interfaces. QoL and organisational climate instruments are related based on social interaction, organisational communication, and work conditions.
A Study of Automated Decision Making Systemsinventy
The decision making process of many operations are dependent on analysing very large data sets, previous decisions and their results. The information generated from the large data sets are used as an input for making decisions. Since the decisions to be taken in day to day operations are expanding, the time taken for manual decision making is also expanding. In order to reduce the time, cost and to increase the efficiency and accuracy, which are the most important things for customer satisfaction, many organisations are adopting the automated decision making systems. This paper is about the technologies used for automated decision making systems and the areas in which automated decisions systems works more efficiently and accurately.
Crystallization of L-Glutamic Acid: Mechanism of Heterogeneous β -Form Nuclea...inventy
The mechanism of heterogeneous nucleation of β-form L-glutamic acid was deeply investigated in cooling crystallization. The present study found that the β-form crystals were epitaxially grown on the α-form crystals and they were preferably crystallized on the (011) and (001) surfaces instead of the (111) surfaces of α- form crystals. This result was explained via the molecular simulation. The molecular simulation indicated that the different surfaces of α-form crystals provided different functional groups, resulting in different sites for the heterogeneous nucleation of β-form crystals. Here, the functional group were COO- , C=O and O-H on the (011) and (001) surfaces of α-form crystals, respectively, while it was the NH3 + on the (111) surfaces of α-form crystals. As such, the degree of lattice matching (E) between the β-form crystals and the various surfaces of α- form crystal was distinguished, where the degree of lattice matching (E) between the β-form crystals and the (011), (001) and (111) surfaces of α-form crystal were estimated as 5.30, 5.25 and 2.39, respectively, implying that the (011) and (001) surfaces of α-form crystal were more favorable to generate the heterogeneous nucleation of β-form crystals than the (111) surfaces of α-form crystal
Evaluation of Damage by the Reliability of the Traction Test on Polymer Test ...inventy
In recent decades, polymers have undergone a remarkable historical development and their use has been greatly imposed by gradually dethroning most of the secular materials. These polymer materials have always distinguished themselves by their simple shaping and inexpensive price, their versatility, lightness, and chemical stability but despite their massive use in everyday life as well as in advanced technologies. Generally, these materials still not understood which requires a thorough knowledge of their chemical, physical, rheological and mechanical properties. This paper, we study the mechanical behavior of an amorphous polymer: Acrylonitrile Butadiene Styrene “ABS” by means of uniaxial tensile testing on pierced test pieces with different notch lengths ranging between 1 to 14mm.The proposed approach consists in analyzing the evolution of the global geometry of the obtained strain curves by taking into account the zones and characteristic points of these curves as well as the effect of the damage on the mechanical behavior of the polymer ABS, in order to visualize the evolution of the damage by a static model
Application of Kennelly’model of Running Performances to Elite Endurance Runn...inventy
: The model of Kennelly between distance (Dlim) and exhaustion time (tlim) has been applied to the individual performances of 19 elite endurance runners (World-record holders and Olympic winners) from P. Nurmi (1920-1924) to M. Farah (2012) whose individual best performances on several different distances are known. Kennelly’s model (Dlim = k tlim ) can describe the individual performances of elite runners with a high accuracy (errors lower than 2 %). There is a linear relationship between parameters k and exponents of the elite runners and the extreme values correspond to S. Coe (k = 15.8; = 0.851) and E. Zatopek (k = 6.57; = 0.984). Exponent can be considered as a dimensionless index of aerobic endurance which is close to 1 in the best endurance runners. If it is assumed than maximal aerobic speed can be maintained 7 min in elite endurance runners, exponent is equal to the normalized critical speed (critical speed/maximal aerobic speed) computed from exhaustion times equal to 3 and 12.5 min in these runners.
Development and Application of a Failure Monitoring System by Using the Vibra...inventy
In this project, a failure monitoring system is developed by using the vibration and location information of balises in railway signaling. A lot of field equipment in railway are loosening and broken in time period so that they need maintenance due to the vibrations that occur due to high speed trains traffic and railway vehicles impact. Among the field equipment, balises have very important role of communication in terms of transmitting information to trains. In this scope, it is aimed to make maintenance works more efficient, have no delayed trains, detect previously failure location and intervene in failure timely, by detecting and controlling balise cases such as loosening, out of place and the data consistency error that happens because of balise physical state. In this project, the communication is provided with I2C, Modbus RTU (Remote Terminal Unit) and RS485 standards by using Arduino Uno cards and MPU6050 IMU (Inertial Measurement Unit) sensors in laboratory. Each used sensors are in slave mode and computer interface designed with C# is in master mode. Fault situations in the system are checked instant by the interface. (it is assumed to mount the IMU sensor and the Arduino circuit on the balise) it is seen that the interface responds to the sensor movements instant and the system works well in the end of test processes.
The Management of Protected Areas in Serengeti Ecosystem: A Case Study of Iko...inventy
The study assessed the management of protected areas in Serengeti ecosystem using the case of IGGRs. Specifically, the study aimed at identifying the strategies used for natural resources management; examining the impacts of those strategies; examining the hindrances of the identified strategies; and lastly, examining the methods for scaling up the performance of strategies used for natural resources in the study area. The study involved two villages among 31 villages bordering IGGRs where in each village; at least 5% of the households were sampled. Both Primary data and secondary data were collected and analyzed both manually and computer by using SPSS software. The study revealed that, study population ranked IGGRs performance on protection of natural resources, especially on conserving wildlife for future generation and in reducing poaching to be good(53.3%). In addition, the relationship with IGGRs was said to be considerable good (46.7%). In the aspect of reducing poaching, the findings show that poaching has been reduced by 96.2% from 2009 to 2012. Furthermore, 81.4% of respondents said they use different strategies to control loss of natural resources which in turn has considerably improved the relationship between protected areas and the surrounding communities in some of the aspects. Despite of above successes, the study findings has revealed a number of challenges that hinders the full attainment of conservation objectives. Among the challenges are loss of life and properties (86.4%), shortage of water for livestock (68.9%) since water sources such as Grumeti and Rubana rivers are within protected area while the adjacent local communities do not have a free access to those water sources. Other challenges especially on the IGGRs management include insufficient fund base, working facilities and inadequate staffs. Based on the above findings, the study concluded that the strategies used for natural resources management of protected areas in Serengeti ecosystem is fairly sustainable and need functional participatory approaches of local people and other stakeholders in order to bring about a collaborative natural resources management network in the ecosystem. Furthermore, based on the findings above, equity in benefit sharing accrued from natural resource management in protected areas, more financial support to IGGRs and local community, the use of non-lethal deterrents for crop protection, integration of croplivestock production systems, adoption of land use plans as a solution to land conflicts, strengthens of community based conservation (CBC), adoption of modern information technology such as geographical information system (GIS) and remote sensing are recommended.
Size distribution and biometric relationships of little tunny Euthynnus allet...inventy
This study is taken from data of commercial fishing of the little tunny, Euthynnus alletteratus (Rafinesque, 1810) caught in the Algerian coast, sampled between november 2011 and april 2016. Data were collected in order to determine size distributions of the population and biometric relationships of species including the size - weight relationships. A total of 601 fish ranged from 30.9 and 103 cm fork length (FL) were observed. The size distribution of Euthynnus alletteratus shows multiple modal values witch the most important cohort corresponds to the age class 2 (42-46 cm). The value of the allometric coefficient (b) of the FL/TW relationship is lower than 3, indicating a negative allometric growth.
Removal of Chromium (VI) From Aqueous Solutions Using Discarded Solanum Tuber...inventy
Industrial polluting effluents containing heavy metals are of serious environmental concern in India. Chromium is frequently used in industries like electroplating, metal finishing, cooling towers, dyes, paints, anodizing and leather tanning and is found as traces in effluents finding their way to natural water bodies causing hazardous toxicity to the health of humans, animals and aquatic lives directly or indirectly. Many methods for the removal of Chromium such as chemical reduction, precipitation, ion exchange, electrochemical reduction, evaporation, reverse osmosis and adsorption using activated carbon etc. have been reported but all being expensive and complicated to operate. Experimental practices reveal that adsorption by agricultural and horticultural wastes are quite simple, inexpensive and efficient method. Agra is famous for Potato farming, a lot of discarded potato waste from cold storages is thrown along road side drains causing solid waste generated which either creates solid waste disposal problem or otherwise it finds way to Yamuna river resulting high BOD and posing a serious threat to the aquatic environment. For developing countries like India adsorption studies using discarded potato (Solanum tuberosum) waste from cold storages (DPWC) a solid waste as low cost adsorbent for Chromium removal was dual beneficial i.e., an ideal solution to these solid wastes disposal problem of Agra and removal of Chromium from tannery effluents and thereby saving aquatic life from Chromium contamination in Yamuna river. Keeping this in view batch experiments were designed to study the feasibility of discarded potato waste from cold storages to remove chromium (VI) from the aqueous solutions. During the study various affecting parameters, such as pH, adsorbent does, initial concentration, temperature, contact time, adsorbent grain size and start up agitation speed were optimized as 5.0, 10-20 g/l, 50 mg/l, 250C, 135 minutes, average size and 80 rpm respectively on chromium removal efficiency. Various Isotherms such as Langmuir, Freundlich, Tempkin also fitted suitably and various corresponding constants determined from these Isotherms favor and support the adsorption. Thermodynamic constants ∆G, ∆H and ∆S were found to be 0.267 KJ/mole, 0.288 KJ/mole and 0.0013 KJ/mole respectively.
Effect of Various External and Internal Factors on the Carrier Mobility in n-...inventy
The effect of various external (temperature, electric field, light) and intracrystalline (doping, initial resistivity) factors on the mobility of carriers in layered n-InSe semiconductor experimentally have been investigated. Scientific explanations of the results are proposed
Transient flow analysis for horizontal axial upper-wind turbineinventy
This study is to carry out a transient flow field analysis on the condition that the wind turbine is working to generate turbine, the wind turbine operating conditions change over time, Purpose of this study is try to find out the rule from the wind turbine changing over time . In transient analysis, the wind velocity on inlet boundary and rotation speed in the rotor field will change over time, and an analytical process is provided that can be used for future reference. At present, the wind turbine model is designed on the concept of upwind horizontal axis type. The computer engineering software GH Bladed is used to obtain the relationship between the rotor velocity and the wind turbine. Then the ANSYS engineering software is used to calculate the stress and strain distribution in the blades over time. From the analytical result, the relationship between the stress distribution in the blades and the rotor velocity is got to be used as a reference for future wind turbine structural optimization.
Choice of Numerical Integration Method for Wind Time History Analysis of Tall...inventy
Wind tunnel tests are being performed routinely around the world for designing tall buildings but the advent of powerful computational tools will make time-history analysis for wind more common in near future. As the duration of wind storms ranges from tens of minutes to hours while earthquake durations are typically less than a three to four minutes, the choice of a time step size (Δt) for wind studies needs to be much larger both to reduce the computational time and to save disk space. As the error in any numerical solution of the equation of motion is dependent on step size (Δt), careful investigations on the choice of numerical integration methods for wind analyses are necessary. From a wide variety of integration methods available, it was decided to investigate three methods that seem appropriate for 3D-time history analysis of tall buildings for wind. These are modal time history analysis, the Hilber-Hughes-Taylor (HHT) method or α-method with α=- 0.1, and the Newmark method with β=0.25 and γ=0.5 ( i.e., trapezoidal rule). SAP2000, a common structural analysis software tool, and a 64-story structure are used to conduct all the analyses in this paper. A boundary layer wind tunnel (BLWT) pressure time history measured at 120 locations around the building envelope of a similar structure is used for the analyses. Analyses performed with both the HHT and Newmark-method considering P-delta effects show that second order effects have a considerable impact on both displacement and acceleration response. This result shows that it is necessary to account P-delta effect for wind analysis of tall buildings. As the direct integration time history analysis required very large computation times and very large computer physical memory for a wind duration of hours, a modal analysis with reduced stiffness is considered as a good alternative. For that purpose, a non-linear static analysis of the structure with a load combination of 1.0D + 1.0L is performed in SAP2000 and the reduced stiffness of the structure after the analysis is used to conduct an eigenvalue analysis to extract the mode shapes and frequencies of this structure. Then the first 20- modes are used to perform a modal time history analysis for wind load. The result shows that the responses from modal analysis with “20-mode (reduced stiffness)” are comparable with that from the P-Δ analyses of Newmark-method
Impacts of Demand Side Management on System Reliability Evaluationinventy
Electricity demand in Saudi Arabia is steadily increasing as electrical loads grows at a rate of about 7% per year, this represents a high rate by all standards, and largely due to population growth, as well as due to government subsidies which may lead to prices much lower than actual production cost. This growth represents a challenge that requires Saudi Electricity Company (SEC) to invest huge amounts of money every year, for the construction of additional generation capacity along with the reinforcement of transmission network to meet the consumption growth.Also the demand varies frequently throughout the day, causing a waste of a large part of the energy. SEC believes the optimum solution lies in altering the load shape in order to have a better balance between customer’s consumption and SEC’s generation, This paper describes the method for improving the power system reliability by shifting the portion of peak load to off-peak periods This load management scheme can be achieved by lifting the generation during off peak periods and utilizing the stored energy during peak periods. A hybrid set up involving solar and wind energy along with batteries can also be used to store energy and utilize it during peak periods.
Reliability Evaluation of Riyadh System Incorporating Renewable Generationinventy
In this paper, the experience of Saudi Electricity Company (SEC) in analyzing the generation adequacy for Year 2013 is presented. This analysis is conducted by calculating several reliability indices for Riyadh system hourly load during all four seasonal periods. The reliability indices are gauged against the international utility practice. SEC also plans to introduce renewable energy into the network in order to secure the environmental standards and reduce fuel costs of conventional generation. Thus, the reliability improvement due to different integration levels of Solar and Wind generating sources has also been investigated. The capacity value provided by these variable renewable energy sources (VERs) to reliably meet the system load has been calculated using effective load carrying capability (ELCC) technique with a loss of load expectancy metric.
The effect of reduced pressure acetylene plasma treatment on physical charact...inventy
The capacitors are increasingly being used as energy storage devicesin various power systems. The scientists of the world are tryingto maximize the electrical capacity of the supercapacitors. To achieve this purpose, numerous method sare used: the surface activation of electrodes, the surface etching using the electronbeam, the electrode etching with variousgasplasma, etc. The purpose of this work is toresearch how the properties of carbon electrodes depend on the plasma parameters at whichtheywere formed. The largest surface area ofcarbonelectrodeof47.25m2 /gis obtainedat 15 ofAr/C2H2gasratio. Meanwhile, theSEMimages show that the disruption of structures with low bond energies and the formation of new onesare taking place when the carbon electrodes are etched at acetylene plasma and placed on carbon electrode. The measurements of capacitance showthat capacitors with affectedelectrodes have about10-15% highercapacity than those not treated with acetyleneplasma.
Experimental Investigation of Mini Cooler cum Freezerinventy
In general cases the refrigerator could be converted into an air conditioner by attaching a fan. Thus a cooler as well as freezer is obtained in a single set up. The freezer can be converted to an air conditioner when the outside air is allowed to flow beside the cooling coil and is forced outside by an exhaust fan. In this case a mini scale cooler cum freezer using R134a as refrigerant was fabricated and tested In our mini project work we had designed, fabricated and experimentally analysed a mini cooler cum freezer. From the observations and calculations, the results of mini cooler cum freezer are obtained and are compared.
Growth and Magnetic properties of MnGeP2 thin filmsinventy
We have successfully grown MnGeP2 thin films on GaAs (100) substrate. A ferromagnetic transition near 320 K has been observed by temperature dependent magnetization and resistance measurements. Field dependent magnetization experiments have shown that the coercive fields at 5, 250, and 300 K are 3870, 1380 and 155 Oe, respectively. Magnetoresistance and Hall measurements have displayed that hole conduction is dominant in MnGeP2. PACS: 75.50.Pp, 75.70.-i, 85.70.-w, 73.50.-h
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Research Inventy : International Journal of Engineering and Science
1. Research Inventy: International Journal Of Engineering And Science
Vol.3, Issue 9 (September 2013), PP 33-36
Issn(e): 2278-4721, Issn(p):2319-6483, Www.Researchinventy.Com
33
Optimized Ant Routing For Improving Qos In Manets
Mrs. D. AHIMUGA SIVASAKTHI
Department Of Computer Science And Engineering
Assistant.Professor In Veltech University, Avadi
ABSTRACT: MANET is a Self-configuring infra-structure less network. It is connected by wireless. One of
the major issues in MANET is routing. Routing is the act of moving information across an internet from source
to destination. Various characteristics like dynamic topology, limited resource & energy, time varying QoS
requirements etc will limit the Performance and Quality. The primary challenge in building MANET is to find
the path between communication end points for satisfying user’s QoS requirements. In this paper an Optimized
Ant Routing (OAR) for improving QoS has been proposed. It introduces a new concept named virtual sub-
colony, which is used to search for an sub-optimal for a given QoS requirements in real time. The proposed
algorithm will be highly adaptive, efficient & scalable, autonomously resolve network congestion & resist
network failures. It can promptly adapt to a changing network status.
Index Terms: MANETS, QoS routing, Ant Colony Optimization
1. INTRODUCTION:
MANET is a collection of mobile systems. It communicates temporarily by means of wireless links.
Since the nodes are mobile, the network topology may change rapidly. It is difficult to maintain the routing
functionality into mobile nodes. Because any nodes may enter or leave from topology & any node can
communicate to other nodes which are within its transmission range. It can change its structure constantly will
make the network resources limited. The Fig: 1 is a kind of Self-Organizing network promising for cost &
flexibility rather than infrastructure network. But they are limited in energy & bandwidth. Hence it leads to a
critical problem such as Routing and Flow-Control. The node mobility and link failures produce constant
changes in the network topology.
Fig:1 Framework of MANET
In recent years, a large number of routing algorithms have been proposed for MANETS. The role of
QoS routing is to compute the paths that are suitable for different type of traffics generated by various
applications while maximizing the utilization of new resources. But the problem of finding out the multi-
constrained paths has high computational complexity. Hence it is a need to use algorithms to address and solve
all these technical issues. The role of QoS routing is to find an optimal path from source to destination,
optimize the utilization of network resource and to degrade the computing and performance when congestion &
path breaks appear in the network. The path computation algorithm is at the core of QoS routing strategies.
Instead of using shortest path algorithm the proposed algorithm is used to select several alternative paths (Multi-
path) that are able to solve end-to-end delay bounds and bandwidth requirements. This proposed OAR provides
promising capabilities for Self-Organizing QoS network (see Fig: 2) and Self-organizing controls.
2. Optimized Ant Routing For Improving…
34
PREVIOUS WORKS: The works related to ACO are found in the literature. In [1] the authors used a hybrid
routing algorithm for MANETS based on ACO & Zone routing framework of broadcasting. Along with QoS
routing protocol the authors [2] combined flow control mechanism, they described Ant system in-order to find
the route with higher transmission rate, less latency and better stability. But the QoS issues end-to-end delay,
available bandwidth, cost and error rate is not considered. In [3] the authors used a new Ant Colony based
routing that uses the information about the location of nodes.
In [4] the authors used a OLSR routing protocol in-order to provide accuracy and stability with optimal path.
But [4] authors used only symmetric links for route setup process.
Fig. 2. Self-organizing QoS Framework
PROPOSED ANT FRAMEWORK
An OAR employs an artificial Ant colony on the network. It uses the Ant’s behavior to find an optimal
path successfully in real time. At regular intervals a number of Ants launch toward randomly chosen destination
nodes to discover Self-Organizes virtual Sub-colonies to those nodes and to investigate the network status along
the paths. The virtual Sub-colony contains three data structures: i) end-to-end delay statistic, ii) remaining
bandwidth status, ii) pheromone table.When multiple paths are available from nest to food, ants do random walk
initially. During their trip to food as well as their return trip to nest, ants lay a chemical substance called
pheromone, which serves as a route mark even to new ants. The pheromone is a volatile substance. The new
ants will prefer a path which has higher pheromone concentration and also reinforce the path they have taken.
Because of this autocatalytic effect the solution emerges rapidly.
Fig:3 Behavior of Ant’s during food search
Let us consider, A is the nest and B is the food source (see fig:3). C and D are obstacles on the way
from A to B in which C has longer distance from A than D to A. The ants will thus have to decide which
direction they will take either C or D. The first ones will choose a random direction and will deposit pheromone
along their way. Those taking the way ADB (BDA) will arrive at the end of the obstacle (depositing more
pheromone on their way) before those that take the way ACB (BCA). The following ant’s choice is then
influenced by the pheromone intensity which stimulates them to choose the path ADB rather than ACB. The
ant’s will then find the shortest route between their nest and the food source.
MECHANISM OF OA FOR ROUTING: In MANETS the network routing is a critical problem since the
network characteristics such as traffic load and network topology may vary rapidly and in a time varying nature.
The given network can be represented as a construction graph where the vertices correspond to set of routers
and links corresponds to the connectivity among routers in that network. Then an ant algorithm
is used to find out a set of minimum cost path between nodes present in the corresponding graph representation.
3. Optimized Ant Routing For Improving…
35
When an incoming flow arrives at a node, the node chooses the proper colony to guarantee QoS of the flow &
forwards packets by referring to the pheromone trails in the colony. Suppose the node Ns transmits a forward ant
toward node Nd. The forward ant explores a path and measures the status of all nodes along the explored path.
PROPOSED OA ALGORITHM:
The proposed approach has two phases i) path identification phase , ii) maintenance phase.
A. PATH IDENTIFICATION PHASE
1. Let the source node i has to send a data to destination j with QoS requirements such as less delay D,
more bandwidth B, Hop-count H, and higher transmission rate. The list of nodes that are visited by ant
is called visited nodes list, now the route R forms the link from i to j.
2. The node i send a Hello-ant message and it is broadcasted in the network. The neighbor node will
react by replying a Hello-ack-ant. Immediately the initial pheromone is entered into a neighbor node
table and it is deposited on the link.
3. The node i initiates a request-ant to node j through all its neighbors which contains source address,
destination address, hop-count and available bandwidth.
4. While travelling to node j the request-ant will collects the transmission delay of each link, processing
delay at each node, available capacity of each link and number of hops visited.
5. When the request-ant reaches to node j, it will be converted as reply-ant and forwarded towards to
original source.
6. After the quantity of pheromone of all the I-Hop distance nodes will be calculated. The pheromone on
each link
(Vi, Vj) is initialized to constant C.
7. Then calculate the pheromone for all the 2-Hop distance nodes.
8. At last the path preference probability value of each path from node I with
every node can be calculated.
9. If calculated path preference probability value is better than the
requirements, the path is accepted and stored in memory.
10. The path with higher path preference probability will be considered as the best optimal path and data
transmission can be started along that path.
B. MAINTENANCE PHASE
When the data transmission is going on the load on the selected path may increase which cause more
delay and less available bandwidth. Nodes might have moved will cause link failures also. So the path
preference probability will automatically decrease. Hence alternate routes can be used which are found during
path identification phase. The alternate routes must be checked periodically for their validity even they are not
currently used.
MANAGEMENT OF OPTIMAL PATH:
Let us assume the measured information to be {(Ik, dk, bk), k=0,1,2…,n} where Ik is the k-th
intermediate node(I0=Ni,In=Nj) along the explored path, dk is the arrival time at Ik and bk is the remaining
bandwidth of Ik . The delay time is dij = dj – di , bandwidth bij=min{bl, l= i,…,j}.The optimal path can be
taken by comparing all the possible bandwidth of nodes along the path from Ii to Ij. The information in the
forward ant moves backward ant to an ant at In, in turn moves backward to I0. The path which gives minimum
bandwidth is to be selected as an optimal path. If Ii successfully selects N*
ij
then Ii updates D*
ij,
B*
ij
in N*
ij
using
the exponential models and also updates the pheromone trails x*n’ ( Nn’ is a neighbor of Ii explored by the
forward ant and Nn’=Ii+1). At regular interval all pheromone trails globally experience the pheromone
evaporation process. It gives the criteria for deletion of unused QoS colonies.
From a node I to an arbitrary node j the metrics delay and bandwidth can be calculated as :
Delay (path (i,j)) = -------- (1)
Bandwidth (path (i,j))= min{bandwidth(e)} ------- (2)
Hop-count (path (i,j)=Number of nodes in the path ------- (3)
Where e denotes the set of bi-directional links , delay(n) denotes the processing delay at the node n.
The hop-count is considered as an important metric because multiple hops are involved to transmit data from
one place to another place in MANET. So it is desirable to find paths with minimum hops. An initial
4. Optimized Ant Routing For Improving…
36
pheromone amount is 0.1 to be deposited on that link as soon as it establishes the connection between two
nodes i and j. The amount of pheromone on the path (i,j) is represented as
Xij = Xij + Xij ------- (4)
Where Xij is the quantity of pheromone.
If there is no data toward a neighbor node its corresponding pheromone value decays by a factor q as
follows:
Xij = (1-q) Xij , if (1-q) Xij >0.1
1 , if (1-q) Xij ≥0.1
1.5 Otherwise -------- (5)
When node I lose its connectivity to its neighbors j then the pheromone on the link i to j will be set to
0. The path preference probability is calculated in both intermediate nodes as well as source nodes upon receipt
of ant. The relative metrics are calculated using (1), (2) and (3) as follows ,when the next hop on the path from
i to d is j:
Dijd=
)),((
1
dipathdelay
--------- (6)
Hijd=
)),((
1
dipathhopcount
--------- (7)
Bijd=bandwidth (path (i, d)) -------- (8)
After finding the path preference through various neighbors, the source as well as intermediate nodes
have multiple paths to destination. The path which has higher preference probability will be selected for data
transmission.
pij =
Cki
kiki
jiji
VX
VX
),(
,,
,,
).()(
).()( --------- (9)
Where,
Xij :- pheromone intensity on path(i,j)
Vij :- ant’s visibility field on path(i,j)
C :- represents the set of possible paths starting from point i
α,β :- parameters which control the relative importance of the pheromone intensity compared to ant’s
visibility field
CONCLUSIONS: This proposal is based on ant’s-like mobile agents to establish multiple stable paths between source to
destination nodes. The proposed OAR can effectively fine the globally best and optimal solution in terms of routing for
given MANET. It is efficient, scalable, autonomously resolve network congestion and resist network failures. It is highly
adaptive and achieves higher bandwidth, shorter delay, and shortest optimal route in terms of hop-count and pheromone.
REFERENCES
[1] Jianping Wang, Eseosa Osagie, Parimala Thulasiraman and Ruppa K.Thulasiram, “A Hybrid Ant conoy optimization routing
algoritm for Mobile ad hoc network”, Department of Computer Science, University of Manitoba, Winnipeg, Manitoba, Canada R3T
2N2.
[2] M. Belkadi, M.Lalam, A.M’zoughi, N.Tamanil, M.Daoui and R.Aoudjit, ”Intelligent routing and flow control in MANETS”, Journal
of computing and Information technology-CIT , pp-233-243, March 18,2010.
[3] Shahab Kamali and Jaroslav Opatrny, “ A Position based Ant colony routing algorithm for mobile ad hoc networks”, Journal of
networks, Vol 3, No.4, April 2008.
[4] Suman Banik, Bibhash roy, Biswajit Saha and Nabendu Chaki,”Design of QoS routing framework based on OLSR Protocol”,
ARTCOM 2010, Kochin, Kottayam Kerala, IEE Explore, pp-171-173, 2010.
[5] C.H.Feng and W.B. Heinzelman, “ RBMuticast receiver based protocol for wireless sensor networks”, IEE Wireless comm.. and
networking conf.(WCNC’09) Apr 2009.