RENOLIT CXI 2 is a calcium sulphonate complex grease developed for heavily loaded rolling or plain bearings operating under severe conditions such as in steel mills, mines, and construction equipment. It shows very good water resistance, corrosion protection, and oil separation properties making it suitable for applications requiring high performance in water resistance and working stability. RENOLIT CXI 2 is easily pumpable and can be fed through centralized lubrication systems.

1. RENOLIT CXI 2
Calcium Sulphonate Complex Grease For
Heavily Loaded Rolling Or Plain Bearing
Description
RENOLIT CXI 2 is an optimised calcium sulphonate
complex thickened grease based on selected base
oils. RENOLIT CXI 2 shows very good characteristics
concerning water resistance, even concerning acids
and alkaline solutions, working stability, corrosion
protection and oil separation. RENOLIT CXI 2 should
be used for all lubrication points requiring a high
performance in relation to water resistance, working
stability, EP and AW properties.
Application
RENOLIT CXI 2 was developed to work under severe
conditions in plain and roller bearings in steel mills,
paper industry, mining, concrete industry, quarries and
construction equipment. RENOLIT CXI 2 is easily
pumpable even in long tubes, fed by centralised
lubrication systems.
Advantages / Benefits
• Good corrosion protection, even in the
presence of salt water.
• Resistant to aging.
• Water resistant.
• Smooth structure.
June 2004 GDUK Page 1 of 2
FUCHS LUBRICANTS (UK) PLC. Tel: +44-8701 -20 04 00
New Century Street, Hanley Fax: +44-1782 -20 20 73
GB-Stoke-on-Trent, Staffordshire, ST1 5HU contact-uk@fuchs-oil.com
http://www.fuchslubricants.com
The above information is supplied to the best of our knowledge and belief on the basis of the
current state-of-the-art and our own development work. Subject to amendment.
I N F O R M A T I O N
Product
FUCHS (UK) PLC.
New Century Street
Hanley
GB-Stoke-on-Trent,
Staffordshire, ST1 5HU

2. Typical Data: RENOLIT CXI 2
Characteristics Unit Test Method
Classification KP 2 P-20
L-X-BEIB 2
DIN 51 502
ISO 6743-9
Colour Light brown
Thickening agent Calcium complex soap
Drop point ºC >270 DIN ISO 2176
Worked penetration 0.1 mm 265-295 DIN ISO 2137
Work stability ∆P w(100,000-60) 0.1 mm <20 DIN ISO 2137
Shell Roller test 72h/100ºC ∆Pw60 0.1 mm <20 ASTM D 1831
NLGI grade 2
Corrosion protection properties
with 3% NaCl (SKF-Emcor test)
degree of
corr. 0 - 0
DIN 51 802
Copper corrosion degree of
corr. 1 - 100
DIN 51 811
Water resistance eval.-stage 0 - 90 DIN 51 807-1
4 ball weld load N 6000 DIN 51 350
Timken test lbs 55 ASTM D 2509
Flow pressure at +20ºC
at -10ºC
at -20ºC
hPa
hPa
hPa
<50
<300
<1400
DIN 51 805
Oil separation at 18h / 40ºC
at 7d / 40ºC
at 18h / 80ºC
at 7d / 80ºC
%
%
%
%
<0.1
<1
<0.5
<2
DIN 51 817
Temperature range ºC -20 up to +160
Fluid Component
Type Mineral Oil
Kinematic viscosity
at 40ºC
at 100ºC
mm2/s
mm2/s
350
32
DIN 51 561-1
June 2004 GDUK Page 2 of 2
FUCHS LUBRICANTS (UK) PLC. Tel: +44-8701 -20 04 00
New Century Street, Hanley Fax: +44-1782 -20 20 73
GB-Stoke-on-Trent, Staffordshire, ST1 5HU contact-uk@fuchs-oil.com
http://www.fuchslubricants.com
The above information is supplied to the best of our knowledge and belief on the basis of the
current state-of-the-art and our own development work. Subject to amendment.
I N F O R M A T I O N
Product
FUCHS (UK) PLC.
New Century Street
Hanley
GB-Stoke-on-Trent,
Staffordshire, ST1 5HU