High Profile Call Girls Nagpur Isha Call 7001035870 Meet With Nagpur Escorts
Renolit cx ht2
1. RENOLIT CX-HT2
High Load, High Temperature, Water Resistant
Grease
Description
RENOLIT CX-HT2 is a lubricating grease based on a
high quality calcium complex soap with a special
selection of base oils.
RENOLIT CX-HT2 features excellent work stability,
good anti-wear properties, extremely good EP
resistance, and outstanding corrosion protection even
in the presence of salt water.
RENOLIT CX-HT2 contains a solid lubricant package
to improve the anti-wear properties under boundary
friction conditions, even under high loads.
Application
RENOLIT CX-HT2 is used for the lubrication of highly
loaded, low speed plain and roller bearings, open
gears and gear wheels.
RENOLIT CX-HT2 is used where special
requirements of wear and corrosion protection under
high temperatures are demanded, e.g. in: -
• Wheel bearings in tunnel furnace cars
• Rotary kilns and mills
• Cement plants
• Coal and ore mills
• Assembly lines of diggers
• Open gear racks and spindle bearings
• Hot applications in brick, ceramic, gassy concrete
and concrete industry
Advantages / Benefits
• High work resistance
• Good anti-wear properties
• Good corrosion protection
• Water resistant
• EP properties
April 2007 GDUK Page 1 of 2
FUCHS LUBRICANTS (UK) PLC. Tel: +44-8701 -20 04 00
New Century Street, Hanley Fax: +44-1782 -20 20 73
GB-Stoke-on-Trent, Staffordshire, ST1 5HU contact-uk@fuchs-oil.com
http://www.fuchslubricants.com
The above information is supplied to the best of our knowledge and belief on the basis of the
current state-of-the-art and our own development work. Subject to amendment.
I N F O R M A T I O N
Product
FUCHS (UK) PLC.
New Century Street
Hanley
GB-Stoke-on-Trent,
Staffordshire, ST1 5HU
2. Typical Data: RENOLIT CX-HT2
Characteristics Unit Test Method
Colour Black
Thickener Calcium complex soap
Dropping point ºC >270 IP396/93
Worked penetration (Pw 60) 0.1mm 265-295 DIN-ISO 2137
Work resistance ∆Pw (100,000-60) 0.1mm <20 DIN-ISO 2137
NLGI Class 2 DIN 51 518
Corrosion protection properties
(Emcor test) degree of corrosion 0 - 0
DIN 51 802
Four ball method, welding load N >6500 DIN 51 350-4
Flow pressure
at +20°C
at -20°C
hPa
hPa
<150
<1400
DIN 51 805
Temperature range
(short term)
ºC
ºC
- 20 up to +200
(+220)
April 2007 GDUK Page 2 of 2
FUCHS LUBRICANTS (UK) PLC. Tel: +44-8701 -20 04 00
New Century Street, Hanley Fax: +44-1782 -20 20 73
GB-Stoke-on-Trent, Staffordshire, ST1 5HU contact-uk@fuchs-oil.com
http://www.fuchslubricants.com
The above information is supplied to the best of our knowledge and belief on the basis of the
current state-of-the-art and our own development work. Subject to amendment.
I N F O R M A T I O N
Product
FUCHS (UK) PLC.
New Century Street
Hanley
GB-Stoke-on-Trent,
Staffordshire, ST1 5HU