1. KRAFFT S.L.
P.O.Box 14
E-20140 Andoain - SPAIN B5622—I
Fax:+34 943 410 430
Phone:+34 943 410 460
TECHNICAL 08.11.2006
E-mail: export@krafft.es
Web site: www.krafft.es INFORMATION -1-
KL COMPLEX 150
COMPLEX LITHIUM GREASE for HIGH TEMPERATURES and HIGH LOADS
DESCRIPTION DIRECTIONS FOR USE
KL COMPLEX 150 is a grease based on KL COMPLEX 150 like a normal lithium
complex lithium soap, highly refined mineral grease, with a pump grease or by centralised
oil, synthetic hydrocarbons and antiwear, lubrication.
extreme pressure, antioxidant and
anticorrosion additives. It is compatible to any grease with the same
base (soap and oil). If it is not the case,
It is free of lead, heavy metals and other consult our Technical Department.
products detrimental to the environment.
APPLICATIONS BENEFITS
KL COMPLEX 150 is designed to be used as • Long lasting at temperatures near 160ºC
high performance multipurpose grease in (peak to +200ºC).
roller and plain bearings, guides, and so on • High resistance to oxidation.
and particularly in mechanisms where it exists • Good speed factor.
special conditions of high temperature and/or • High corrosion protection.
humidity, water, load or speed like in rolling • Very stable against water.
trains, roller roads, kilns, conveyors, dryers, • High load carrying capacity.
fans, blowers, exhaustors, electric motors, • Simplify remarkably the number of greases
pumps, and so on in different industries, like to be kept in stock as it can be used in
Steel, Cement; Paper, Ceramic, Power nearly all the industrial applications.
Station, and so on...
• Environment friendly.
Standard: FORD WSD M1C 228 A
or FORD SQ M1C 9004 A
CHARACTERISTICS
Working temperatures ............................................... From -20 to +160ºC (peak of 200ºC)
Colour ......................................................................
Brown
Density (ASTM-D-1574) ........................................... 0.90 kg/dm3 approx.
Base .........................................................................
Lithium Complex soap, mineral oil, synthetic
hydrocarbons
NLGI consistency ...................................................... 2
Penetration at 60 strokes (ASTM-D-217) ................. 265 -295 mm/10
Penetration change after 100.000 strokes (ASTM-D217) . 30 mm/10 max.
Stability against work, SHELL roll test (ASTM-D-1831) .... 30 mm/10 max.
Drop point (ASTM-D-566) ........................................ 260ºC min.
Water washout resistance (ASTM-D-1264), loss ..... 4% max.
Dynamic corrosion protection (DIN 51802) .............. level 0 (no corrosion)
Oil separation, 7 days at 40ºC (DIN 51817) ............. 4% max.
SHELL 4-ball test, weld load (ASTM-D2596) ........... 300 kg min.
TIMKEN test, OK load .............................................. 45 lbs min.
Lead and heavy metal ............................................... Free
Note: These data are average values after different tests. Due to the great variety of working conditions, these data do not
constitute a base for specifications. KRAFFT reserves the right to change the specifications without previous notice.