The document discusses using fly ash to stabilize organic soils. It finds that fly ash can increase the unconfined compressive strength and resilient modulus of organic soils, but the degree of improvement depends on the soil and fly ash characteristics. Specifically, soils with higher organic content see less improvement. The key fly ash properties that affect stabilization are the CaO content and the CaO/SiO2 ratio, with higher ratios providing better stabilization through pozzolanic reactions. Testing of various organic soils and fly ashes showed that strength and stiffness generally increased with higher fly ash percentages.
Prediction Models for Estimation of California Bearing Ratio for Cohesive Soilijtsrd
Cohesive soils are well known for their low strength properties. Thus, they are inappropriate for geotechnical works. Soils may be stabilized to increase strength and durability. Stabilization with cement is a common treatment technology. The present study examines the strength of cement stabilized soil. The laboratory tests were carried out in order to study the strength of california bearing ratio (CBR). Nine clayey soils with different properties were mixed with various amounts of cement content (3, 6, 9 and 12%) and compacted at the optimum moisture content and maximum dry density. Soaked or unsoaked condition of soil affects the CBR value. The test results show that unsoaked CBR before stabilization ranges between 2.78% and 10.22% which that of its corresponding soaked samples range between 1.01% and 9.5%. After stabilization, the values of unsoaked CBR range between 3.08% and 47%. The maximum values of unsoaked CBR are within 10.8% to 47%. So it can be used as sub-base condition. The conventional CBR testing method is expensive and time consuming. The laboratory test results were used for the development of regression based model to predict unsoaked and soaked CBR values for natural and cement stabilized soil. Aye Aye Myat | Nyan Myint Kyaw | Htay Win"Prediction Models for Estimation of California Bearing Ratio for Cohesive Soil" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018, URL: http://www.ijtsrd.com/papers/ijtsrd12819.pdf http://www.ijtsrd.com/engineering/civil-engineering/12819/prediction-models-for-estimation-of-california-bearing-ratio-for-cohesive-soil/aye-aye-myat
Effect of Resin on the Strength Characteristics of Thonnakkal ClayIJERA Editor
Improving the properties of soil by stabilization is considered as a means of fulfilling design criteria.
Stabilization is usually performed to improve material properties of soil such as strength, stiffness, and
permeability. The use of new materials for soil strengthening is crucial for geotechnical engineering, especially
in foundation construction. Experiments were conducted using resins with different epoxy resin-to-water
(ER/W) ratios. . The results show that by increasing the resin in the soil, the maximum dry density increases,
and the optimum water content decreases in the compaction tests.The results indicate that the epoxy resins
improve the physical and mechanical properties of soil significantly, and if successfully grouted into a
formation, the resins could provide a suitable solution for the stabilization of foundation material.
Prediction Models for Estimation of California Bearing Ratio for Cohesive Soilijtsrd
Cohesive soils are well known for their low strength properties. Thus, they are inappropriate for geotechnical works. Soils may be stabilized to increase strength and durability. Stabilization with cement is a common treatment technology. The present study examines the strength of cement stabilized soil. The laboratory tests were carried out in order to study the strength of california bearing ratio (CBR). Nine clayey soils with different properties were mixed with various amounts of cement content (3, 6, 9 and 12%) and compacted at the optimum moisture content and maximum dry density. Soaked or unsoaked condition of soil affects the CBR value. The test results show that unsoaked CBR before stabilization ranges between 2.78% and 10.22% which that of its corresponding soaked samples range between 1.01% and 9.5%. After stabilization, the values of unsoaked CBR range between 3.08% and 47%. The maximum values of unsoaked CBR are within 10.8% to 47%. So it can be used as sub-base condition. The conventional CBR testing method is expensive and time consuming. The laboratory test results were used for the development of regression based model to predict unsoaked and soaked CBR values for natural and cement stabilized soil. Aye Aye Myat | Nyan Myint Kyaw | Htay Win"Prediction Models for Estimation of California Bearing Ratio for Cohesive Soil" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018, URL: http://www.ijtsrd.com/papers/ijtsrd12819.pdf http://www.ijtsrd.com/engineering/civil-engineering/12819/prediction-models-for-estimation-of-california-bearing-ratio-for-cohesive-soil/aye-aye-myat
Effect of Resin on the Strength Characteristics of Thonnakkal ClayIJERA Editor
Improving the properties of soil by stabilization is considered as a means of fulfilling design criteria.
Stabilization is usually performed to improve material properties of soil such as strength, stiffness, and
permeability. The use of new materials for soil strengthening is crucial for geotechnical engineering, especially
in foundation construction. Experiments were conducted using resins with different epoxy resin-to-water
(ER/W) ratios. . The results show that by increasing the resin in the soil, the maximum dry density increases,
and the optimum water content decreases in the compaction tests.The results indicate that the epoxy resins
improve the physical and mechanical properties of soil significantly, and if successfully grouted into a
formation, the resins could provide a suitable solution for the stabilization of foundation material.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Review Paper on Study on Properties of Black Cotton Soil using Stone Dust and...ijtsrd
Soil is basic and important element in Civil Engineering field. Stability of every structure depends on the type and characteristics of foundation which in turn depends on the type of soil. Many problems irrupt if expansive soil, Natural soil is to be used in foundation, because of its shrinkage and swelling properties. There are many methods to make natural soil stable for various constructions. Natural soil is comfortable for road work, compared to other types of soil. There are two ways to enhance the quality of sub grade soil “Replacement of soil†or “Soil stabilizationâ€. Soil stabilization can be done chemically or mechanically. Chemical stabilization is carried out by adding different chemicals in suitable proportion, while Mechanical stabilization is achieved by addition of admixtures which helps to improve the properties of soil. Wankhade Ashutosh Purushottam | Pratiksha Malviya "Review Paper on Study on Properties of Black Cotton Soil using Stone Dust and Sisal Fiber" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-2 , February 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23537.pdf
Effects of Soil and Air Drying Methods on Soil Plasticity of Different Cities...IJERA Editor
Atterberg Limits were initially defined in 1911, by Albert Atterberg, a Swedish scientist. Their purposes are to classifying cohesive soils and determine engineering properties of soils. According to ASTM, all the soils tested by Atterberg limits should be oven dried, it is because drying the soils in different degree will alter their properties significantly. Some of the physical properties of soils will undergo changes that appear to be permanent. Therefore, the soil samples should be in natural or air-dried form. However, in reality, due to time constraint and other factors, many will run the tests by using soil samples that are prepared by oven drying method. They assumed that there is no difference between the results of two types of drying method. However, in reality, the properties of soil will be affected and thus give a misleading result. The objective of this study is to determine the effect of two drying methods, air-drying method and oven drying method, on the soil plasticity. Six soil samples from different cities were tested. These tests include sieve analysis, specific gravity test, hydrometer analysis, Plastic limit and liquid limit test. Conclusively, the oven drying method could not replace the air-drying method in soil preparation for both Atterberg limits tests.
CHARACTERIZATION OF GYPSEOUS SOIL STABILIZED WITH FLY ASH GEOPOLYMER ANALYZED...IAEME Publication
The primary target of this work is focused on the performance of gypseous soil and
the impacts of internal sulfate from gypsum. The simulation analysis optimizes to
reduce the collapsibility potential of gypseous soil stabilized with intrinsic sulfate
attack by utilizing hybrid optimization model. In order to assess the compressive
strength, collapsibility potential for the soaked and unsoaked specimen, coefficient of
Permeability, weight loss, and leachout based on flyash and alkali activated solution
with the assistance of Fuzzy logic (FL) and Radial Bias Function (RBF). The result
demonstrated that the proposed hybrid model (FL-RBF) gives the minimum error rate
when compared to individual algorithms.
An Experimental Study of Soil Stabilization with Cement and Polymerijtsrd
The aim of the study was to determine the value of Unconfined compressive strength and CBR values of Soil after stabilizing it with Cement and Polymer. Soil stabilization has been widely used as an alternative to substitute the lack of suitable material on site. The utilization of nontraditional compound stabilizers in soil improvement is developing every day. In this investigation a lab try was led to assess the impacts of waterborne polymer on unconfined pressure quality on sandy soil and CBR Test on clayey soil .The lab tests were performed including grain size of sandy soil, unit weight, and unconfined compressive quality test. The sand and different measures of polymer 2 , 3 , and 4 and concrete 20 , 30 , and 40 were blended in with every one of them into mixture utilizing hand blending in research center conditions. The examples were exposed to unconfined pressure tests to decide their quality following 7 days of restoring. The consequences of the tests showed that the waterborne polymer fundamentally improved the unconfined pressure quality of sandy soils which have weakness of liquefaction. Polymer altered the building properties of soil through physical holding. The amount of polymer required to modify the engineering properties was directly related to specific surface and soil particle coating thickness. Polymer amended soils displayed a reduced performance compared to cement amended soils. Sankalp Jain | Prabhat Kumar Tiwari | Abhay Kumar Jha "An Experimental Study of Soil Stabilization with Cement and Polymer" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, URL: https://www.ijtsrd.com/papers/ijtsrd47711.pdf Paper URL : https://www.ijtsrd.com/engineering/civil-engineering/47711/an-experimental-study-of-soil-stabilization-with-cement-and-polymer/sankalp-jain
Performance evaluation of locally available soil mixed with Fly ash and rando...IOSR Journals
In India, transportation is mainly by roads. Very small villages, remote areas and hilly areas can be accessed only by roads. Hence considerable attention is required towards the widening of roads, their stability and periodic repair works. Most state highways in the central part of India have problems of foundation due to presence of highly compressible clayey soils like black cotton soil. Black cotton soil is an expansive soil, which swells or shrinks excessively due to change in moisture content. When black cotton soil is associated with an engineering structure, it experiences either settlement or heave depending on the stress level and the soil swelling pressure. Design and construction of civil engineering structures on and with expansive soils is a challenging task for engineers. The present work is aimed to assess the improvement in the strength and stability characteristics in soft Subgrade soil by using the fly ash for the stabilization and then Nylon fibre as reinforcing material. Randomly distributed fibre reinforced soil (RDFRS) technique is used to prepare the reinforced soil samples. In RDFRS technique the mixing of reinforcement in the soil is very easy and no special skill is required. The reinforcement is added by percentage of the weight of the soil sample and by following certain aspect ratio i.e., length/diameter (L/D) ratio. Attempt is made to determine optimum combination of fly ash and fiber content for maximum gain in strength.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
EXPERIMENTAL INVESTIGATION ON CALIFORNIA BEARING RATIO FOR MECHANICALLY STABI...IAEME Publication
Soil stabilization is any process which improves the physical properties of soil, such as increasing shear strength, bearing capacity etc. which can be done by use of controlled compaction or addition of suitable admixtures like cement, lime and waste materials like phosphogypsum,etc. The cost of introducing these additives has also increased in recent yearswhich opened the door widely for the development of other kinds of soil additives such as plastics, bamboo, fly ash etc. This new technique of soil stabilization can be effectively used to meet the challenges of society, to reduce the quantities of waste, producing useful material from non-useful waste materials.
Engineering properties of soil comprises of physical properties, index properties, strength parameters (shear strength parameters), permeability characteristics, consolidation properties, modulus parameters, dynamic behavior etc. This module highlights most of the engineering properties of soils.
Engineering geology is the application of the science of geology to the technology of ground engineering. The subject requires a comprehensive knowledge of geology, as well as an understanding of engineering properties and behaviour of the geological materials. The practice involves site investigation and site characterization specific to the needs of the engineering project. The geotechnical engineer plays a key role in most civil engineering projects as most structures are built on or in the ground. Geotechnical engineers assess the properties and behaviour of soil and rock formations.
Soil is a peculiar material. Some waste materials such Fly Ash, rice husk ash, pond ash may use to
make the soil to be stable. Addition of such materials will increase the physical as well as chemical properties of
the soil. Some expecting properties to be improved are CBR value, shear strength, liquidity index, plasticity
index, unconfined compressive strength and bearing capacity etc. The objective of this study was to evaluate the
effect of Fly Ash derived from combustion of sub-bituminous coal at electric power plants in stabilization of soft
fine-grained red soils. California bearing ratio (CBR) and other strength property tests were conducted on soil.
The soil is in range of plasticity, with plasticity indices ranging between 25 and 30. Tests were conducted on
soils and soil–Fly Ash mixtures prepared at optimum water content of 9% .Addition of Fly Ash resulted in
appreciable increases in the CBR of the soil. For water contents 9% wet of optimum, CBRs of the soils are
found in varying percentage such that 3,5,6and 9.We will found optimum CBR value of the soil is 6%.Increment
of CBR value is used to reduce the thickness of the pavement. And increasing the bearing capacity of soil.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Review Paper on Study on Properties of Black Cotton Soil using Stone Dust and...ijtsrd
Soil is basic and important element in Civil Engineering field. Stability of every structure depends on the type and characteristics of foundation which in turn depends on the type of soil. Many problems irrupt if expansive soil, Natural soil is to be used in foundation, because of its shrinkage and swelling properties. There are many methods to make natural soil stable for various constructions. Natural soil is comfortable for road work, compared to other types of soil. There are two ways to enhance the quality of sub grade soil “Replacement of soil†or “Soil stabilizationâ€. Soil stabilization can be done chemically or mechanically. Chemical stabilization is carried out by adding different chemicals in suitable proportion, while Mechanical stabilization is achieved by addition of admixtures which helps to improve the properties of soil. Wankhade Ashutosh Purushottam | Pratiksha Malviya "Review Paper on Study on Properties of Black Cotton Soil using Stone Dust and Sisal Fiber" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-2 , February 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23537.pdf
Effects of Soil and Air Drying Methods on Soil Plasticity of Different Cities...IJERA Editor
Atterberg Limits were initially defined in 1911, by Albert Atterberg, a Swedish scientist. Their purposes are to classifying cohesive soils and determine engineering properties of soils. According to ASTM, all the soils tested by Atterberg limits should be oven dried, it is because drying the soils in different degree will alter their properties significantly. Some of the physical properties of soils will undergo changes that appear to be permanent. Therefore, the soil samples should be in natural or air-dried form. However, in reality, due to time constraint and other factors, many will run the tests by using soil samples that are prepared by oven drying method. They assumed that there is no difference between the results of two types of drying method. However, in reality, the properties of soil will be affected and thus give a misleading result. The objective of this study is to determine the effect of two drying methods, air-drying method and oven drying method, on the soil plasticity. Six soil samples from different cities were tested. These tests include sieve analysis, specific gravity test, hydrometer analysis, Plastic limit and liquid limit test. Conclusively, the oven drying method could not replace the air-drying method in soil preparation for both Atterberg limits tests.
CHARACTERIZATION OF GYPSEOUS SOIL STABILIZED WITH FLY ASH GEOPOLYMER ANALYZED...IAEME Publication
The primary target of this work is focused on the performance of gypseous soil and
the impacts of internal sulfate from gypsum. The simulation analysis optimizes to
reduce the collapsibility potential of gypseous soil stabilized with intrinsic sulfate
attack by utilizing hybrid optimization model. In order to assess the compressive
strength, collapsibility potential for the soaked and unsoaked specimen, coefficient of
Permeability, weight loss, and leachout based on flyash and alkali activated solution
with the assistance of Fuzzy logic (FL) and Radial Bias Function (RBF). The result
demonstrated that the proposed hybrid model (FL-RBF) gives the minimum error rate
when compared to individual algorithms.
An Experimental Study of Soil Stabilization with Cement and Polymerijtsrd
The aim of the study was to determine the value of Unconfined compressive strength and CBR values of Soil after stabilizing it with Cement and Polymer. Soil stabilization has been widely used as an alternative to substitute the lack of suitable material on site. The utilization of nontraditional compound stabilizers in soil improvement is developing every day. In this investigation a lab try was led to assess the impacts of waterborne polymer on unconfined pressure quality on sandy soil and CBR Test on clayey soil .The lab tests were performed including grain size of sandy soil, unit weight, and unconfined compressive quality test. The sand and different measures of polymer 2 , 3 , and 4 and concrete 20 , 30 , and 40 were blended in with every one of them into mixture utilizing hand blending in research center conditions. The examples were exposed to unconfined pressure tests to decide their quality following 7 days of restoring. The consequences of the tests showed that the waterborne polymer fundamentally improved the unconfined pressure quality of sandy soils which have weakness of liquefaction. Polymer altered the building properties of soil through physical holding. The amount of polymer required to modify the engineering properties was directly related to specific surface and soil particle coating thickness. Polymer amended soils displayed a reduced performance compared to cement amended soils. Sankalp Jain | Prabhat Kumar Tiwari | Abhay Kumar Jha "An Experimental Study of Soil Stabilization with Cement and Polymer" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, URL: https://www.ijtsrd.com/papers/ijtsrd47711.pdf Paper URL : https://www.ijtsrd.com/engineering/civil-engineering/47711/an-experimental-study-of-soil-stabilization-with-cement-and-polymer/sankalp-jain
Performance evaluation of locally available soil mixed with Fly ash and rando...IOSR Journals
In India, transportation is mainly by roads. Very small villages, remote areas and hilly areas can be accessed only by roads. Hence considerable attention is required towards the widening of roads, their stability and periodic repair works. Most state highways in the central part of India have problems of foundation due to presence of highly compressible clayey soils like black cotton soil. Black cotton soil is an expansive soil, which swells or shrinks excessively due to change in moisture content. When black cotton soil is associated with an engineering structure, it experiences either settlement or heave depending on the stress level and the soil swelling pressure. Design and construction of civil engineering structures on and with expansive soils is a challenging task for engineers. The present work is aimed to assess the improvement in the strength and stability characteristics in soft Subgrade soil by using the fly ash for the stabilization and then Nylon fibre as reinforcing material. Randomly distributed fibre reinforced soil (RDFRS) technique is used to prepare the reinforced soil samples. In RDFRS technique the mixing of reinforcement in the soil is very easy and no special skill is required. The reinforcement is added by percentage of the weight of the soil sample and by following certain aspect ratio i.e., length/diameter (L/D) ratio. Attempt is made to determine optimum combination of fly ash and fiber content for maximum gain in strength.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
EXPERIMENTAL INVESTIGATION ON CALIFORNIA BEARING RATIO FOR MECHANICALLY STABI...IAEME Publication
Soil stabilization is any process which improves the physical properties of soil, such as increasing shear strength, bearing capacity etc. which can be done by use of controlled compaction or addition of suitable admixtures like cement, lime and waste materials like phosphogypsum,etc. The cost of introducing these additives has also increased in recent yearswhich opened the door widely for the development of other kinds of soil additives such as plastics, bamboo, fly ash etc. This new technique of soil stabilization can be effectively used to meet the challenges of society, to reduce the quantities of waste, producing useful material from non-useful waste materials.
Engineering properties of soil comprises of physical properties, index properties, strength parameters (shear strength parameters), permeability characteristics, consolidation properties, modulus parameters, dynamic behavior etc. This module highlights most of the engineering properties of soils.
Engineering geology is the application of the science of geology to the technology of ground engineering. The subject requires a comprehensive knowledge of geology, as well as an understanding of engineering properties and behaviour of the geological materials. The practice involves site investigation and site characterization specific to the needs of the engineering project. The geotechnical engineer plays a key role in most civil engineering projects as most structures are built on or in the ground. Geotechnical engineers assess the properties and behaviour of soil and rock formations.
Soil is a peculiar material. Some waste materials such Fly Ash, rice husk ash, pond ash may use to
make the soil to be stable. Addition of such materials will increase the physical as well as chemical properties of
the soil. Some expecting properties to be improved are CBR value, shear strength, liquidity index, plasticity
index, unconfined compressive strength and bearing capacity etc. The objective of this study was to evaluate the
effect of Fly Ash derived from combustion of sub-bituminous coal at electric power plants in stabilization of soft
fine-grained red soils. California bearing ratio (CBR) and other strength property tests were conducted on soil.
The soil is in range of plasticity, with plasticity indices ranging between 25 and 30. Tests were conducted on
soils and soil–Fly Ash mixtures prepared at optimum water content of 9% .Addition of Fly Ash resulted in
appreciable increases in the CBR of the soil. For water contents 9% wet of optimum, CBRs of the soils are
found in varying percentage such that 3,5,6and 9.We will found optimum CBR value of the soil is 6%.Increment
of CBR value is used to reduce the thickness of the pavement. And increasing the bearing capacity of soil.
Investigation of Physicochemical Changes of Soft Clay around Deep Geopolymer ...AltinKaradagli
This study investigates the improvement of soft clay through the deep mixing method with an alkaline substance and the production of geopolymer materials through the reaction between clay and alkaline substance.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Soil Stabilization using Fly Ash and Cotton Fiberijtsrd
Mixing of fiber for ground improvement has been practiced for recent years. Many researches has shown the expected results. This paper mainly deals with the ground improvement technique using both Fly Ash and cotton fiber. The combination of them gives a satisfactory value of its practical application. Both Fly Ash and Cotton fiber are treated as waste materials in our country in spite of having its engineering significances. Here all the tests were performed accepting the Fly Ash percent is 10 for maximum bearing capacity of soil. Three types of sample were prepared as per 0.3%, 0.5%, 0.7% of cotton fiber. For instances, it deliberately increases the Dry Density of soil up to 48.05 KN/m3 where as normal unreinforced soil sample gives about 22 KN/m3. The Ultimate bearing capacity increases up to 80.65 Kpa whereas the unreinforced soil sample gives for 35 Kpa. The result of California Bearing Ratio (CBR) test gives desired value (23%) than unreinforced soil (17%). The CBR test is performed only for 0.7% of cotton fiber where maximum stress is found. The most significant part in this study is to show the variation on cotton fiber for ground improvement technique at different ratio. This paper shows the gradual increase in Deviator stress for UCS tests for the increase in the percent of cotton fiber mixing with Fly Ash. This research may meet the need of ground having low strength at important sites. Tonmoy Kumar Brahmachary "Soil Stabilization using Fly Ash and Cotton Fiber " Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-1 | Issue-6 , October 2017, URL: http://www.ijtsrd.com/papers/ijtsrd2493.pdf http://www.ijtsrd.com/engineering/civil-engineering/2493/soil-stabilization-using-fly-ash-and-cotton-fiber-/tonmoy-kumar-brahmachary-
Effect of Fines on Liquefaction Resistance in Fine Sand and Silty SandIJERA Editor
It is required to recognize the conditions that exist in a soil deposit before an earthquake in order to identify
liquefaction. Soil is basically an assemblage of many soil particles which stay in contact with many neighboring
soil. The contact forces produced by the weight of the overlying particles holds individual soil particle in its
place and provide strength. Occurrence of liquefaction is the result of rapid load application and break down of
the loose and saturated sand and the loosely-packed individual soil particles tries to move into a denser
configuration. However, there is not enough time for the pore-water of the soil to be squeezed out in case of
earthquake. Instead, the water is trapped and prevents the soil particles from moving closer together. Thus, there
is an increase in water pressure which reduces the contact forces between the individual soil particles causing
softening and weakening of soil deposit. In extreme conditions, the soil particles may lose contact with each
other due to the increased pore-water pressure. In such cases, the soil will have very little strength, and will
behave more like a liquid than a solid - hence, the name "liquefaction".
Effect of Fines on Liquefaction Resistance in Fine Sand and Silty SandIJERA Editor
It is required to recognize the conditions that exist in a soil deposit before an earthquake in order to identify
liquefaction. Soil is basically an assemblage of many soil particles which stay in contact with many neighboring
soil. The contact forces produced by the weight of the overlying particles holds individual soil particle in its
place and provide strength. Occurrence of liquefaction is the result of rapid load application and break down of
the loose and saturated sand and the loosely-packed individual soil particles tries to move into a denser
configuration. However, there is not enough time for the pore-water of the soil to be squeezed out in case of
earthquake. Instead, the water is trapped and prevents the soil particles from moving closer together. Thus, there
is an increase in water pressure which reduces the contact forces between the individual soil particles causing
softening and weakening of soil deposit. In extreme conditions, the soil particles may lose contact with each
other due to the increased pore-water pressure. In such cases, the soil will have very little strength, and will
behave more like a liquid than a solid - hence, the name "liquefaction".
Soil stabilization is the permanent physical and chemical alteration of soils to enhance their physical properties.
Stabilization can increase the shear strength of a soil and control the shrink-swell properties of a soil, thus improving the load-bearing capacity of a sub-grade to support pavements and foundations.
Stabilization can be used to treat a wide range of sub-grade materials from expansive clays to granular materials.
Stabilization can be achieved with a variety of chemical additives including lime, fly ash, and Portland cement, as well as by-products such as lime-kiln dust and cement-kiln dust.
1) Mechanical Soil Stabilization Technique:
Dense and well graded material can be achieved by mixing and compacting two or more soils of different grades.
Addition of a small amount of fine materials such as silts or clays enables binding of the non-cohesive soils which increases strength of the material.
Factors affecting the mechanical stability of mixed soil may include:
The mechanical strength and purity of the constituent materials
The percentage of materials and its gradation in the mix
The degree of soil binding taking place
The mixing, rolling, and compaction procedures adopted in the field
The environmental and climatic conditions
2) Compaction Soil Stabilisation Technique:
Uses mechanical means for expulsion of air voids within the soil mass resulting in soil that can bear load subsequently without further immediate compression.
Dynamic compaction is one of the major types of soil stabilization; in this procedure, a heavyweight is dropped repeatedly onto the ground at regular intervals to quite literally pound out deformities and ensure a uniformly packed surface.
1) Moisture Content. 2) Specific gravity of soil. 3) Atterberg’s limit. 4) Liquid limit. 5) Particle size distribution. 6) Preparation of reinforced soil sample. 7) Determination of shear strength.
1) Moisture Content
Soil tests natural moisture content of the soil is to be determined. The natural water content also called the natural moisture content is the ratio of the weight of water to the weight of the solids in a given mass of soil.
2) Specific gravity of soil.
The specific gravity of soil is defined as the unit weight of the soil mass divided by the unit weight of distilled water at 4°C.
3) Atterberg’s limit
Atterberg's limits are a set of tests used in soil mechanics to determine the plasticity and compressibility characteristics of soil
1. It improves the strength of the soil, thus, increasing the soil bearing capacity.
2. It is a lot of economical each in terms of price and energy to extend.
3. Bearing capacity of the soil instead of going for deep foundation or raft foundation.
4. It offers more stability to the soil in slopes or other such places.
5. Sometimes soil stabilization is also stop soil erosion or formation of mud, which is extremely helpful particularly in dry and arid weather.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.