This document summarizes a study on the influence of subsurface materials on pavement performance along the Yebu-Agaro road in Ethiopia. Soil samples were taken from severely damaged and undamaged sections of the road and tested in the lab. The tests found that the subgrade soil had liquid limits ranging from 33-60.5%, plasticity indexes from 20.3-30.1%, and soaked CBR values between 8-13%, which is below the minimum specified value of 15%. This indicates the subgrade soil is a poor material for the pavement structure. Analysis showed the soil types were also poor according to AASHTO and USCS classifications. It was concluded that failures along the road were influenced by the sub
Evaluation of Flexible Pavement Failures-A Case Study on Izki RoadIJAEMSJORNAL
Pavement is a multi-layer system that distributes the vehicular loads over a larger area. It helps to make them durable and able to withstand traffic and the environment. Pavement consists of three basic layers the first layer is Sub grade (Gravel) which is the foundation layer, the second layer is sub base (layer Assistant foundation) and the top layer is base (a layer of pavement) which consists of Bituminous Carpet + Bituminous Macadam. Cracking of pavement is a defect that appears in the top layer of the road. Pavement can be under compression and tension at the same time, but in different directions. While a tire compresses a pavement downward, it forms a deflection basin which causes the pavement to go into tension in both horizontal directions. If the pavement is not strong enough, the asphalt is stretched too far, which separates and a crack forms in the wheel track. A crack may also form between the wheel tracks. The maintenance of roads means protecting, restoration and strengthening of all elements of the road to maintain sustainability of the road. Road maintenance also includes additional work that is necessary in order to raise the level of performance and reach the best level of safety and comfort for the road users. Roads are high-cost investments and need constant maintenance so that these investments continue to perform as required. Therefore, care must be taken to maintain the roads in optimum maintenance and in a scientific manner. The aim of this Study is to identify the most common types of cracks and defects which occur in Izki road and suggest suitable option for maintenance. The objectives are to identify different types of cracks & defects, to find out the different reasons that cause defects and cracks in Izki road and to suggest suitable maintenance methods. A 2km length of the road was selected for the study. Survey was carried out and the reasons for cracking and other failures in pavement were studied. Finally, the required maintenance solution for each type of failures was identified and the best maintenance option was selected.
Time, in the globalized world, is one of the most important factors about the economy, science and health. Mankind has made various efforts to use time efficiently for many years. In these studies transport came to the fore and it has become indispensable. In the light of today's technological conditions, air transport is developing at an increasing rate. Every day many aircrafts are produced, which have different speeds, weight and volume, for serve to transport. Therefore to make structures for easy and safe transport need a stable soil. Particularly suitable areas for the airport grounds in cities today, not being physically proper that construction of the airport made on soil with low bearing capacity, swelling potential of an expansive soil, settlement of soil etc, areas. In this study, soil problems encountered in the construction of airports will be explained and a summary of studies on the solution of these problems will be presented.
INVESTIGATING CAUSES OF PAVEMENT DETERIORATION IN KHARTOUM STATEIAEME Publication
It is quite essential to investigate the causes of pavement deterioration in order to select the proper maintenance technique. The objective of this study was to identify factors cause deterioration of recently constructed roads in Khartoum state. A comprehensive literature concerning the factors of road deterioration, common road defects and their causes were reviewed. Three major road projects with different deterioration reasons were selected for this study. The investigation involved field survey and laboratory testing on those projects to examine the existing pavement conditions.
Evaluation of Flexible Pavement Failures-A Case Study on Izki RoadIJAEMSJORNAL
Pavement is a multi-layer system that distributes the vehicular loads over a larger area. It helps to make them durable and able to withstand traffic and the environment. Pavement consists of three basic layers the first layer is Sub grade (Gravel) which is the foundation layer, the second layer is sub base (layer Assistant foundation) and the top layer is base (a layer of pavement) which consists of Bituminous Carpet + Bituminous Macadam. Cracking of pavement is a defect that appears in the top layer of the road. Pavement can be under compression and tension at the same time, but in different directions. While a tire compresses a pavement downward, it forms a deflection basin which causes the pavement to go into tension in both horizontal directions. If the pavement is not strong enough, the asphalt is stretched too far, which separates and a crack forms in the wheel track. A crack may also form between the wheel tracks. The maintenance of roads means protecting, restoration and strengthening of all elements of the road to maintain sustainability of the road. Road maintenance also includes additional work that is necessary in order to raise the level of performance and reach the best level of safety and comfort for the road users. Roads are high-cost investments and need constant maintenance so that these investments continue to perform as required. Therefore, care must be taken to maintain the roads in optimum maintenance and in a scientific manner. The aim of this Study is to identify the most common types of cracks and defects which occur in Izki road and suggest suitable option for maintenance. The objectives are to identify different types of cracks & defects, to find out the different reasons that cause defects and cracks in Izki road and to suggest suitable maintenance methods. A 2km length of the road was selected for the study. Survey was carried out and the reasons for cracking and other failures in pavement were studied. Finally, the required maintenance solution for each type of failures was identified and the best maintenance option was selected.
Time, in the globalized world, is one of the most important factors about the economy, science and health. Mankind has made various efforts to use time efficiently for many years. In these studies transport came to the fore and it has become indispensable. In the light of today's technological conditions, air transport is developing at an increasing rate. Every day many aircrafts are produced, which have different speeds, weight and volume, for serve to transport. Therefore to make structures for easy and safe transport need a stable soil. Particularly suitable areas for the airport grounds in cities today, not being physically proper that construction of the airport made on soil with low bearing capacity, swelling potential of an expansive soil, settlement of soil etc, areas. In this study, soil problems encountered in the construction of airports will be explained and a summary of studies on the solution of these problems will be presented.
INVESTIGATING CAUSES OF PAVEMENT DETERIORATION IN KHARTOUM STATEIAEME Publication
It is quite essential to investigate the causes of pavement deterioration in order to select the proper maintenance technique. The objective of this study was to identify factors cause deterioration of recently constructed roads in Khartoum state. A comprehensive literature concerning the factors of road deterioration, common road defects and their causes were reviewed. Three major road projects with different deterioration reasons were selected for this study. The investigation involved field survey and laboratory testing on those projects to examine the existing pavement conditions.
Anup Kumar Gupta
SRF at Departmetn of Environmental Science and Engineering,Indian School of Mines, Dhanbad, India
Mine fill is an integral part of mining, different techniques have been used for the same. This presentation is focused on few of the important technique with a descriptive analysis.
Tunnelling is a serious engineering project.
In addition to large investment cost, the challenges related to long and deep tunnels are considerable.
Important aspects which needs to be considered are related to the construction works, geology, environment and operation. his module highlights all these aspects.
Performance Study on California Bearing Ratio Values using Geosyntheticsijtsrd
The main use of geosynthetics or geofabrics is ensured in any given geotechnical engineering work or application. Mahendra Kumar | Ajeet Singh "Performance Study on California Bearing Ratio Values using Geosynthetics" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-2 , February 2021, URL: https://www.ijtsrd.com/papers/ijtsrd38634.pdf Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/38634/performance-study-on-california-bearing-ratio-values-using-geosynthetics/mahendra-kumar
Overview of Soil Stabilization :Cement / Lime:ReportAniket Pateriya
Soil-cement is frequently used as a construction material for pipe bedding, slope protection, and road construction as a sub-base layer reinforcing and protecting the subgrade. It has good compressive and shear strength, but is brittle and has low tensile strength, so it is prone to forming cracks.
Lime can be used to treat soils to varying degrees, depending upon the objective. The least amount of treatment is used to dry and temporarily modify soils. Such treatment produces a working platform for construction or temporary roads. A greater degree of treatment supported by testing, design, and proper construction techniques--produces permanent structural stabilization of soils.
Geosynthetics- Types, and their use in Retaining WallsAbhishek Bharti
All you need to know about Geosynthetics, its types, uses etc. their uses in retaining walls have been focused...
The Best Presentation you can possibly find on Geosynthetics.
Anup Kumar Gupta
SRF at Departmetn of Environmental Science and Engineering,Indian School of Mines, Dhanbad, India
Mine fill is an integral part of mining, different techniques have been used for the same. This presentation is focused on few of the important technique with a descriptive analysis.
Tunnelling is a serious engineering project.
In addition to large investment cost, the challenges related to long and deep tunnels are considerable.
Important aspects which needs to be considered are related to the construction works, geology, environment and operation. his module highlights all these aspects.
Performance Study on California Bearing Ratio Values using Geosyntheticsijtsrd
The main use of geosynthetics or geofabrics is ensured in any given geotechnical engineering work or application. Mahendra Kumar | Ajeet Singh "Performance Study on California Bearing Ratio Values using Geosynthetics" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-2 , February 2021, URL: https://www.ijtsrd.com/papers/ijtsrd38634.pdf Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/38634/performance-study-on-california-bearing-ratio-values-using-geosynthetics/mahendra-kumar
Overview of Soil Stabilization :Cement / Lime:ReportAniket Pateriya
Soil-cement is frequently used as a construction material for pipe bedding, slope protection, and road construction as a sub-base layer reinforcing and protecting the subgrade. It has good compressive and shear strength, but is brittle and has low tensile strength, so it is prone to forming cracks.
Lime can be used to treat soils to varying degrees, depending upon the objective. The least amount of treatment is used to dry and temporarily modify soils. Such treatment produces a working platform for construction or temporary roads. A greater degree of treatment supported by testing, design, and proper construction techniques--produces permanent structural stabilization of soils.
Geosynthetics- Types, and their use in Retaining WallsAbhishek Bharti
All you need to know about Geosynthetics, its types, uses etc. their uses in retaining walls have been focused...
The Best Presentation you can possibly find on Geosynthetics.
Nigeria has a matured flexible pavement road network owned by the public sector called the Federal Road. The 72km road networks from Ilesha – Akure are providing excellent service to road users for interstate movement. Due to movement of vehicles on the road, bitumen pavements tend to crack at some point of their lives under the combined action of traffic and the environment. These cracks are defects in the pavement surfacing which weaken the pavement and allow water to penetrate and cause potholes on the pavement. The results of a study conducted to facilitate the development of road pavement performance models that are appropriate for Nigeria and other similar developing countries, which could predict the rate of deterioration over their lifespan, have been presented. Comprehensive investigations were carried out on the expressway from the Federal University of Technology (FUTA) North Gate to NNPC Mega Station in Akure, Ondo State – apparently one of the busiest section along the road. The data collected are on traffic characteristics, Structural Number (pavement thickness), potholes and other distress types. Using these data and with the help of stepwise regression analysis, models were developed to predict the road pavement deterioration within the area of study and that could be useful for evaluating the failure susceptibility of the road. The calibrated model has 98.8% and 98.7% as R2 and adjusted R2 respectively. The model also has 8.8% (as average) difference between the predicted and actual rate of deterioration. The model can therefore, be used for planning maintenance programs of flexible pavement roads.
Analyses of Some Engineering Properties of Ado-Ekiti to Ilawe-Ekiti Road Soil...ijtsrd
This study sought to analyze the Engineering properties of Ado-Ekiti to Ilawe-Ekiti road soil. Soil samples were taken from three locations within the study area to laboratory for Atterberg Limits, Particle Size Distribution and Permeability tests. Results showed that the Liquid Limit (LL), Plasticity Index (PI), Shrinkage Limit (SL) and Permeability values varied from 28.48 to 32.50%, 12.03 to 23.60%, 0.6 to 0.72% and 5.14 x 10-5 ¬to 1.08 x 10-3 mms respectively for all the soil samples. Their clay or silt, sand and gravel also ranged from 15.3 to 34.1%, 48.1 "“ 77.2% and 3.8 "“ 13.6% respectively. The soil samples were generally and grouply classified as granular and A - 2 - 6 materials with mainly silty or clayey gravel and sand constituent materials. All the soil samples were good as subgrade, subbase and base materials. However, they have low permeability, which showed the reason for road failure in their locations. It is recommended that further study should be carried out. Samuel O. Akinlolu | Adeyemi E. Adetoro"Analyses of Some Engineering Properties of Ado-Ekiti to Ilawe-Ekiti Road Soil, Southwestern Nigeria" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-5 , August 2018, URL: http://www.ijtsrd.com/papers/ijtsrd15739.pdf http://www.ijtsrd.com/engineering/civil-engineering/15739/analyses-of-some-engineering-properties-of-ado-ekiti-to-ilawe-ekiti-road-soil-southwestern-nigeria/samuel-o-akinlolu
This describes about causes, effects, types of pavement failure.
Failures in flexible pavements can be due to failure of its component layers which undergo distress due to various causes. Types of failures in flexible pavements and repair techniques are discussed.
INVESTIGATING SURFACE DRAINAGE PROBLEM OF ROADS IN KHARTOUM STATEIAEME Publication
Poor drainage contributes immensely to pavement deterioration and subsequently causing increased annual repair expenditure. The investigation is conducted to provide extensive diagnosis to point out the causes of roads problems associated with poor surface drainage and provides possible mitigation measures to overcome the problem in Khartoum state. Some cases of existing roads in different regions in Khartoum state, suffered from severe distresses and damages due to poor drainage were studied. The method used to assess the existing drainage system of the studied roads is field survey. Based on field observations, the drainage structures suffered from blockage with dumping wastes, inadequate inlets and outlet channels, failure of side walls and bed erosion.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
ROAD PAVEMENT DESIGN FOR HEAVY GROUND WATER TABLE IN SHIRPUR AND SURROUNDING ...IAEME Publication
Road failure is common problem in India and areas like Shirpur having high water table area are mainly suffered from this problem. To overcome this problem, some methods are studied in this project to improve the bearing capacity of soil such as the use of Geogrids, Cement mixing, proper sub-surface drainage. Soil can be improved by the addition of a stabilizer or excess aggregate. In any case, the traditional undercut & stabilization solution is often costly & always time-consuming. The paper suggests the use of geogrid which helps in increasing the bearing capacity of subgrade soil while greatly reducing the loss of aggregate cover material into weak, wet or saturated subgrade soils. It also provides extensive cost savings & decreased life cycle costs when compared to other structural solutions.
Study on comparative flexible pavement thickness analysis using various desig...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.