RCQ Plant Report.pptx
•Download as PPTX, PDF•
0 likes•78 views
This document provides guidance on completing plant reports. It explains that reports should include production and downtime logged in 15-minute increments, with reasons for downtime. Crew names and load counts are also included. Fuel levels, hours run, products made, and minor repairs needed are additional sections. The purpose is to add uniformity to reporting.
Report
Share
Report
Share
Recommended
Lean six sigma black belt project by iftakhar
It was really excited to run my First Lean Six Sigma Black Belt Project in my factory . And during the project im really great full to my honorable management . Now im posting this project for the audience of this site .
The SMED Method by CLT Services
This is, I am sure, the best presentation about the SMED method. It supports our training course on SMED. For more information call us on: (+351)936.000.079
Best regards,
João Paulo Pinto.
www.cltservices.net
001 QM Stage 1-7 ACME final
1. The document describes quality maintenance processes for shock absorbers at Magneti Marelli Motherson Shock Absorbers India.
2. It details steps taken to restore equipment to proper working condition, such as changing bolts and fittings, to address known causes of defects.
3. Metrics like Cpk were improved from below 1 to over 2 for critical dimensions like piston groove diameter and piston end diameter, indicating the establishment of zero defect conditions.
project ppt
The document provides a summary of an industrial training project at FIAT India Automobiles Limited. It discusses 3 projects aimed at improving productivity, quality, and safety. Project 1 focuses on improving safety by implementing proper use of personal protective equipment. Project 2 analyzes defects using a problem-solving tool to identify human errors as the root cause. Project 3 reduces non-value-added activities in the trimming assembly line by merging inspection stages, eliminating unnecessary movements, and balancing the line activities. The goals are to reduce bottlenecks and increase production throughput.
Log11 uitwerking opdrachten
Uitwerking opdracht TBELOG11 voor studenten TB Hogeschool Rotterdam
Aan deze uitwerkingen kunnen GEEN rechten worden ontleend
Blackbeltpresentation
The document summarizes the efforts of a team to improve the rigid laminate scheduling system at a manufacturing plant. Key changes included decoupling scheduling from sales orders, scheduling the press based on the top 5 master sheet parts to better manage variation, and batching odd rigid orders to be processed twice per month. These changes reduced unnecessary changeovers, late shipments, and inventory levels. Metrics showed improvements like a 14% increase in plant capacity and a 13% reduction in master sheet work-in-process inventory.
Pt hpm half yearly presentation on may
The document summarizes the financial and operational performance of PT Hantong Precision Manufacturing Batam in the first half of 2010. Key points include:
- Cost savings increased each month from November 2009 to April 2010 in areas like reducing scrap costs, line non-conformances, and consumables. Floor profit also increased.
- Sales and order targets were mostly met for SOT, quality, and RTY performance. Some issues were noted and corrective actions outlined.
- Initiatives on clean production, self-quality processes, TPM, and new projects increased productivity and flexibility.
Lean Manufacturing Project
The document discusses lean implementation efforts at a production cell that manufactures connectors. It outlines the challenges of reducing lead time by 60%, work in progress by 70%, and other metrics. Process analysis was conducted including value stream mapping. Opportunities were identified and prioritized. Changes implemented included layout redesign, standard work, visual management boards, and focused improvement teams. Lessons from kaizen events were documented. The lean transformation efforts showed improvements across key metrics and engaged the team.
Recommended
Lean six sigma black belt project by iftakhar
It was really excited to run my First Lean Six Sigma Black Belt Project in my factory . And during the project im really great full to my honorable management . Now im posting this project for the audience of this site .
The SMED Method by CLT Services
This is, I am sure, the best presentation about the SMED method. It supports our training course on SMED. For more information call us on: (+351)936.000.079
Best regards,
João Paulo Pinto.
www.cltservices.net
001 QM Stage 1-7 ACME final
1. The document describes quality maintenance processes for shock absorbers at Magneti Marelli Motherson Shock Absorbers India.
2. It details steps taken to restore equipment to proper working condition, such as changing bolts and fittings, to address known causes of defects.
3. Metrics like Cpk were improved from below 1 to over 2 for critical dimensions like piston groove diameter and piston end diameter, indicating the establishment of zero defect conditions.
project ppt
The document provides a summary of an industrial training project at FIAT India Automobiles Limited. It discusses 3 projects aimed at improving productivity, quality, and safety. Project 1 focuses on improving safety by implementing proper use of personal protective equipment. Project 2 analyzes defects using a problem-solving tool to identify human errors as the root cause. Project 3 reduces non-value-added activities in the trimming assembly line by merging inspection stages, eliminating unnecessary movements, and balancing the line activities. The goals are to reduce bottlenecks and increase production throughput.
Log11 uitwerking opdrachten
Uitwerking opdracht TBELOG11 voor studenten TB Hogeschool Rotterdam
Aan deze uitwerkingen kunnen GEEN rechten worden ontleend
Blackbeltpresentation
The document summarizes the efforts of a team to improve the rigid laminate scheduling system at a manufacturing plant. Key changes included decoupling scheduling from sales orders, scheduling the press based on the top 5 master sheet parts to better manage variation, and batching odd rigid orders to be processed twice per month. These changes reduced unnecessary changeovers, late shipments, and inventory levels. Metrics showed improvements like a 14% increase in plant capacity and a 13% reduction in master sheet work-in-process inventory.
Pt hpm half yearly presentation on may
The document summarizes the financial and operational performance of PT Hantong Precision Manufacturing Batam in the first half of 2010. Key points include:
- Cost savings increased each month from November 2009 to April 2010 in areas like reducing scrap costs, line non-conformances, and consumables. Floor profit also increased.
- Sales and order targets were mostly met for SOT, quality, and RTY performance. Some issues were noted and corrective actions outlined.
- Initiatives on clean production, self-quality processes, TPM, and new projects increased productivity and flexibility.
Lean Manufacturing Project
The document discusses lean implementation efforts at a production cell that manufactures connectors. It outlines the challenges of reducing lead time by 60%, work in progress by 70%, and other metrics. Process analysis was conducted including value stream mapping. Opportunities were identified and prioritized. Changes implemented included layout redesign, standard work, visual management boards, and focused improvement teams. Lessons from kaizen events were documented. The lean transformation efforts showed improvements across key metrics and engaged the team.
Course project ie6560 group 10_presentation
• Implemented mixed integer linear programming for language to equation conversion using MS Excel
• Performed rigor calculation and scenario analysis on 6 different cases using Excel solver and QM solver
• Integrated decision tree analysis to cross validate and to choose between different solutions
• Suggested new manufacturing portfolio which will result in net profit increment of 19%
PLC programming example - Paint Spray
The document outlines a 5-step process for developing a PLC program for a paint spray application system. The steps are: 1) define the task, 2) define inputs and outputs, 3) develop a logical sequence of operation using a flowchart, 4) develop the PLC program, and 5) test the program. It then provides details for each step as applied to a conveyor system that feeds boxes through a spray nozzle, with inputs like start/stop buttons and outputs like conveyor motor and spray valve control.
MMAE557 Consulting Project-Li He(A20358122),Xingye Dai(A20365915)
This document analyzes and proposes improvements to the manufacturing process of a bearing factory in China. It contains the following key points:
1. The factory currently uses a batch production system across 3 lines to manufacture bearing parts. Cycle times and production rates are calculated for 2 products on each line.
2. Opportunities for improvement are identified, including doubling the operating hours to reduce assembly cycle times and increasing production rates.
3. An analysis of the optimal number of workstations and workers per line is conducted to maximize efficiency within the constraints of the factory's budget and resources.
4. The proposed improvements could reduce the total cost per bearing by optimizing resource utilization across the manufacturing lines.
UTC Aerospace System - Value Stream Mapping
Value Stream Map Training developed by VALUE DRIVEN SOLUTIONS for the UTC AEROSPACE SYSTEM
http://lean6sigma4all.eu/war-room/
TPM PRECISION CHANGEOVERS
This document discusses techniques for improving production changeovers through Total Productive Maintenance. It describes a 4-phase process to analyze changeovers, including separating internal and external tasks, converting internal tasks to external where possible, and streamlining remaining tasks. Specific examples provided include installing quick release clips, locating pins and setting blocks to reduce changeover time, as well as developing standard operating procedures and checklists. The overall goal is to continuously improve changeovers through breaking tasks into discrete steps and finding ways to eliminate unnecessary time and motion.
Scheduling by Primavera - Training
This document provides information about planning and scheduling for a metro rail project in Hyderabad, India. It includes details about various project managers and consultants involved in the project. It then discusses the advantages of planning and scheduling, different project phases, knowledge areas, and tools used for planning like Primavera, Microsoft Project, and Excel. It also covers work breakdown structures, resource and organization breakdown structures, activity costing, scheduling techniques, progress measurement, and variance analysis. Overall, the document outlines key concepts and processes for project planning and control used for large infrastructure projects.
IE431 Final Presentation
This document outlines a theory of constraints project to improve production at a transmission plant. A team analyzed data on downtime, availability, performance and cycle times across departments. They identified issues like part detection failures causing downtime. The team set targets to reduce cycle times by 1-2.5 seconds through countermeasures like improving part detection. Final results showed potential savings of $69,914 per year and an increase in production rate from 172 to 174.05 stand alone jobs per hour.
Production Schedule Report 2016-rv
This document contains a weekly production schedule for a manufacturing plant over five days from Monday to Friday. It includes planned versus actual production hours and output for different production lines and shifts. Several key performance metrics like overall equipment effectiveness (OEE) are reported. Production was highest on the Monday day shift, achieving an OEE of 105.56%, and lowest on Wednesday with no recorded output.
Predire presentation Shanghai - Automotive 2016
This document summarizes the operations of Predire Quality Testing Technologies Co. Ltd. in Shanghai, China. It describes their equipment and facilities for climate simulation, corrosion, durability, material, and vehicle testing. They have over 20 employees and aim to expand to additional locations in China by 2022. Their testing follows international standards and they have experience working with major global automotive companies.
Final Project Presentation on Internship Report 2015, BUFT
This document describes a knit composite textile factory in Bangladesh. It was established in 1997 and employs over 6,500 people. It produces knitted garments for export markets in Europe and the USA. To improve conditions, a Supplier Qualification Project was implemented through a Change Management Team consisting of staff and workers. They received training and made improvements such as upgrading infrastructure, implementing safety measures, and providing healthcare and bonuses for employees. This resulted in benefits like reduced worker migration and absenteeism as well as fewer injuries.
PLC problem troubleshooting
PLC problem troubleshooting in automation industries using new approach which is universal to all special purpose machines and cheap to install.
Six Sigma Case Study
The document discusses using Six Sigma methodology to reduce in-process rejections at a manufacturing unit producing wheel cylinders. It analyzes the main causes of rejection, implements solutions, and measures the results. The key defects causing rejection were identified as main bore shift and M10 damage. Solutions like correcting hydraulic leaks, improving clamping, and modifying casting processes reduced monthly rejections from 205 to 15 and increased the sigma rating from 2.92 to 3.62, saving approximately $42,780 annually.
Factory yearly improvement presention
This document summarizes the progress and plans of Newage Apparels Ltd Unit 1. In 2015, the unit's efficiency increased from 43.73% to 48.76%. Sewing production per month increased from 631867 pieces to 686812 pieces. The plans for 2016 include further increasing efficiency to 55% through line-wise improvements, increasing yearly production to 8241744 pieces, and conducting skill testing and recruitment to better allocate workers across skill levels. The IE department made progress in 2015 through activities like line graphing, database development, and studies. Their plans for 2016 include continuing these activities across the sewing, finishing and cutting areas to further improve productivity. Key challenges in 2015 included high worker migration, absentee
IRJET - Invistigation and Implement of Six Sigma and Reduce Labour Cost a...
This document discusses an investigation into implementing Six Sigma methods to reduce rejection rates and labor costs in a plastic injection molding process. It begins with an introduction to injection molding and Six Sigma. A case study of an Indian plastic parts manufacturer is presented, where the process was experiencing high rejection rates of 10%. Six Sigma methods were used to identify causes of defects like missing inserts. Solutions included adding a timer to the process logic controller to stop the process if inserts were missing. This reduced rejection rates to only 5% and saved an estimated Rs. 172,800 per year in labor costs by reducing downtime. In conclusion, Six Sigma implementation improved quality, productivity and profits for the company by minimizing variations and defects.
Learn How to Manage Backlog from Toyota Kanban Concepts, Agile Roots 2014
Here is the deck I presented at Agile Roots 2014 event.
http://www.agileroots.com/
http://www.agileroots.com/presentation/learn-how-to-manage-backlog-from-toyota-kanban-concepts/
6-Sigma Training-Awareness for automobile industries
Six Sigma is a data-driven problem-solving methodology used to improve processes. It was developed by Motorola in 1987 and focuses on reducing defects and variation to achieve a goal of 3.4 defects per million opportunities. The Six Sigma methodology follows the DMAIC process - Define, Measure, Analyze, Improve, and Control. This document provides details on the history, definition, and goals of Six Sigma, as well as an overview of the DMAIC process and examples of how it can be applied to define and solve problems.
Tablas militares
The document contains tables from the MIL-STD-105E standard for sampling inspection plans. It includes tables for single, double, and multiple sampling plans for normal, tightened, and reduced inspection at various acceptable quality levels. It also provides guidelines for implementing MIL-STD-105E, including determining sample size based on lot size, selecting the appropriate sampling plan table, and rules for switching between inspection levels.
Landi.2022.Presentation v2.pdf
Using CAST for Additional Risk Detection in Boiler Explosions in Brazil discusses a 2017 boiler explosion aboard the Norbe VIII drillship that killed 3 workers. The authors analyze the accident using CAST, identifying that safety devices had been tampered with and procedures not followed. They make recommendations, including improving legislation, procedures, training, and oversight to address systemic safety issues. The analysis found the root causes went beyond the event itself to issues in the broader safety system.
HOP Yick BD Ltd SMED
This document contains analysis of operations for producing a moulded padded bra over multiple days. It found that learning curve issues where the primary root cause of inefficiency, accounting for over 70% of additional time. Other significant factors included delays in material preparation, machine maintenance issues, and lack of standard operating procedures. Overall, actual time was over triple the expected time due to various issues related to new product introduction and process training.
Industrial plants and safety project
The aim of the project was to design factory for the manufacture of steel products. The project included but was not limited to: choice of an optimal position for the factory with respect to customers and suppliers, design of layout including line balancing, number of required workers, placement of heavy machinery respecting safety regulations, transportation including in plant transportation, raw material and finished product storages, docks and specifications of all required machinery.
一比一原版布拉德福德大学毕业证（bradford毕业证）如何办理
一模一样【微信：A575476】【布拉德福德大学毕业证（bradford毕业证）成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
More Related Content
Similar to RCQ Plant Report.pptx
Course project ie6560 group 10_presentation
• Implemented mixed integer linear programming for language to equation conversion using MS Excel
• Performed rigor calculation and scenario analysis on 6 different cases using Excel solver and QM solver
• Integrated decision tree analysis to cross validate and to choose between different solutions
• Suggested new manufacturing portfolio which will result in net profit increment of 19%
PLC programming example - Paint Spray
The document outlines a 5-step process for developing a PLC program for a paint spray application system. The steps are: 1) define the task, 2) define inputs and outputs, 3) develop a logical sequence of operation using a flowchart, 4) develop the PLC program, and 5) test the program. It then provides details for each step as applied to a conveyor system that feeds boxes through a spray nozzle, with inputs like start/stop buttons and outputs like conveyor motor and spray valve control.
MMAE557 Consulting Project-Li He(A20358122),Xingye Dai(A20365915)
This document analyzes and proposes improvements to the manufacturing process of a bearing factory in China. It contains the following key points:
1. The factory currently uses a batch production system across 3 lines to manufacture bearing parts. Cycle times and production rates are calculated for 2 products on each line.
2. Opportunities for improvement are identified, including doubling the operating hours to reduce assembly cycle times and increasing production rates.
3. An analysis of the optimal number of workstations and workers per line is conducted to maximize efficiency within the constraints of the factory's budget and resources.
4. The proposed improvements could reduce the total cost per bearing by optimizing resource utilization across the manufacturing lines.
UTC Aerospace System - Value Stream Mapping
Value Stream Map Training developed by VALUE DRIVEN SOLUTIONS for the UTC AEROSPACE SYSTEM
http://lean6sigma4all.eu/war-room/
TPM PRECISION CHANGEOVERS
This document discusses techniques for improving production changeovers through Total Productive Maintenance. It describes a 4-phase process to analyze changeovers, including separating internal and external tasks, converting internal tasks to external where possible, and streamlining remaining tasks. Specific examples provided include installing quick release clips, locating pins and setting blocks to reduce changeover time, as well as developing standard operating procedures and checklists. The overall goal is to continuously improve changeovers through breaking tasks into discrete steps and finding ways to eliminate unnecessary time and motion.
Scheduling by Primavera - Training
This document provides information about planning and scheduling for a metro rail project in Hyderabad, India. It includes details about various project managers and consultants involved in the project. It then discusses the advantages of planning and scheduling, different project phases, knowledge areas, and tools used for planning like Primavera, Microsoft Project, and Excel. It also covers work breakdown structures, resource and organization breakdown structures, activity costing, scheduling techniques, progress measurement, and variance analysis. Overall, the document outlines key concepts and processes for project planning and control used for large infrastructure projects.
IE431 Final Presentation
This document outlines a theory of constraints project to improve production at a transmission plant. A team analyzed data on downtime, availability, performance and cycle times across departments. They identified issues like part detection failures causing downtime. The team set targets to reduce cycle times by 1-2.5 seconds through countermeasures like improving part detection. Final results showed potential savings of $69,914 per year and an increase in production rate from 172 to 174.05 stand alone jobs per hour.
Production Schedule Report 2016-rv
This document contains a weekly production schedule for a manufacturing plant over five days from Monday to Friday. It includes planned versus actual production hours and output for different production lines and shifts. Several key performance metrics like overall equipment effectiveness (OEE) are reported. Production was highest on the Monday day shift, achieving an OEE of 105.56%, and lowest on Wednesday with no recorded output.
Predire presentation Shanghai - Automotive 2016
This document summarizes the operations of Predire Quality Testing Technologies Co. Ltd. in Shanghai, China. It describes their equipment and facilities for climate simulation, corrosion, durability, material, and vehicle testing. They have over 20 employees and aim to expand to additional locations in China by 2022. Their testing follows international standards and they have experience working with major global automotive companies.
Final Project Presentation on Internship Report 2015, BUFT
This document describes a knit composite textile factory in Bangladesh. It was established in 1997 and employs over 6,500 people. It produces knitted garments for export markets in Europe and the USA. To improve conditions, a Supplier Qualification Project was implemented through a Change Management Team consisting of staff and workers. They received training and made improvements such as upgrading infrastructure, implementing safety measures, and providing healthcare and bonuses for employees. This resulted in benefits like reduced worker migration and absenteeism as well as fewer injuries.
PLC problem troubleshooting
PLC problem troubleshooting in automation industries using new approach which is universal to all special purpose machines and cheap to install.
Six Sigma Case Study
The document discusses using Six Sigma methodology to reduce in-process rejections at a manufacturing unit producing wheel cylinders. It analyzes the main causes of rejection, implements solutions, and measures the results. The key defects causing rejection were identified as main bore shift and M10 damage. Solutions like correcting hydraulic leaks, improving clamping, and modifying casting processes reduced monthly rejections from 205 to 15 and increased the sigma rating from 2.92 to 3.62, saving approximately $42,780 annually.
Factory yearly improvement presention
This document summarizes the progress and plans of Newage Apparels Ltd Unit 1. In 2015, the unit's efficiency increased from 43.73% to 48.76%. Sewing production per month increased from 631867 pieces to 686812 pieces. The plans for 2016 include further increasing efficiency to 55% through line-wise improvements, increasing yearly production to 8241744 pieces, and conducting skill testing and recruitment to better allocate workers across skill levels. The IE department made progress in 2015 through activities like line graphing, database development, and studies. Their plans for 2016 include continuing these activities across the sewing, finishing and cutting areas to further improve productivity. Key challenges in 2015 included high worker migration, absentee
IRJET - Invistigation and Implement of Six Sigma and Reduce Labour Cost a...
This document discusses an investigation into implementing Six Sigma methods to reduce rejection rates and labor costs in a plastic injection molding process. It begins with an introduction to injection molding and Six Sigma. A case study of an Indian plastic parts manufacturer is presented, where the process was experiencing high rejection rates of 10%. Six Sigma methods were used to identify causes of defects like missing inserts. Solutions included adding a timer to the process logic controller to stop the process if inserts were missing. This reduced rejection rates to only 5% and saved an estimated Rs. 172,800 per year in labor costs by reducing downtime. In conclusion, Six Sigma implementation improved quality, productivity and profits for the company by minimizing variations and defects.
Learn How to Manage Backlog from Toyota Kanban Concepts, Agile Roots 2014
Here is the deck I presented at Agile Roots 2014 event.
http://www.agileroots.com/
http://www.agileroots.com/presentation/learn-how-to-manage-backlog-from-toyota-kanban-concepts/
6-Sigma Training-Awareness for automobile industries
Six Sigma is a data-driven problem-solving methodology used to improve processes. It was developed by Motorola in 1987 and focuses on reducing defects and variation to achieve a goal of 3.4 defects per million opportunities. The Six Sigma methodology follows the DMAIC process - Define, Measure, Analyze, Improve, and Control. This document provides details on the history, definition, and goals of Six Sigma, as well as an overview of the DMAIC process and examples of how it can be applied to define and solve problems.
Tablas militares
The document contains tables from the MIL-STD-105E standard for sampling inspection plans. It includes tables for single, double, and multiple sampling plans for normal, tightened, and reduced inspection at various acceptable quality levels. It also provides guidelines for implementing MIL-STD-105E, including determining sample size based on lot size, selecting the appropriate sampling plan table, and rules for switching between inspection levels.
Landi.2022.Presentation v2.pdf
Using CAST for Additional Risk Detection in Boiler Explosions in Brazil discusses a 2017 boiler explosion aboard the Norbe VIII drillship that killed 3 workers. The authors analyze the accident using CAST, identifying that safety devices had been tampered with and procedures not followed. They make recommendations, including improving legislation, procedures, training, and oversight to address systemic safety issues. The analysis found the root causes went beyond the event itself to issues in the broader safety system.
HOP Yick BD Ltd SMED
This document contains analysis of operations for producing a moulded padded bra over multiple days. It found that learning curve issues where the primary root cause of inefficiency, accounting for over 70% of additional time. Other significant factors included delays in material preparation, machine maintenance issues, and lack of standard operating procedures. Overall, actual time was over triple the expected time due to various issues related to new product introduction and process training.
Industrial plants and safety project
The aim of the project was to design factory for the manufacture of steel products. The project included but was not limited to: choice of an optimal position for the factory with respect to customers and suppliers, design of layout including line balancing, number of required workers, placement of heavy machinery respecting safety regulations, transportation including in plant transportation, raw material and finished product storages, docks and specifications of all required machinery.
Similar to RCQ Plant Report.pptx (20)
MMAE557 Consulting Project-Li He(A20358122),Xingye Dai(A20365915)
MMAE557 Consulting Project-Li He(A20358122),Xingye Dai(A20365915)
Final Project Presentation on Internship Report 2015, BUFT
Final Project Presentation on Internship Report 2015, BUFT
IRJET - Invistigation and Implement of Six Sigma and Reduce Labour Cost a...
IRJET - Invistigation and Implement of Six Sigma and Reduce Labour Cost a...
Learn How to Manage Backlog from Toyota Kanban Concepts, Agile Roots 2014
Learn How to Manage Backlog from Toyota Kanban Concepts, Agile Roots 2014
6-Sigma Training-Awareness for automobile industries
6-Sigma Training-Awareness for automobile industries
Recently uploaded
一比一原版布拉德福德大学毕业证（bradford毕业证）如何办理
一模一样【微信：A575476】【布拉德福德大学毕业证（bradford毕业证）成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Exploring Career Paths in Cybersecurity for Technical Communicators
Brief overview of career options in cybersecurity for technical communicators. Includes discussion of my career path, certification options, NICE and NIST resources.
Leadership Ambassador club Adventist module
Aims to equip people who aspire to become leaders with good qualities,and with Christian values and morals as per Biblical teachings.The you who aspire to be leaders should first read and understand what the ambassador module for leadership says about leadership and marry that to what the bible says.Christians sh
一比一原版(U-Barcelona毕业证）巴塞罗那大学毕业证成绩单如何办理
一模一样【q/微:1954292140】【(U-Barcelona毕业证）巴塞罗那大学毕业证成绩单Offer】【q/微:1954292140】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【q/微:1954292140】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【q/微:1954292140】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
'Guidance and counselling- role of Psychologist in Guidance and Counselling.
It is about role of Psychologist in Guidance and Counselling.
一比一原版(UVic毕业证)维多利亚大学毕业证如何办理
UVic毕业证成绩单【微信95270640】《如何办理UVic毕业证维多利亚大学文凭学历》【Q微信95270640】《维多利亚大学文凭学历证书》《维多利亚大学毕业证书与成绩单样本图片》毕业证书补办 Fake Degree做学费单《毕业证明信-推荐信》成绩单，录取通知书，Offer，在读证明，雅思托福成绩单，真实大使馆教育部认证，回国人员证明，留信网认证。网上存档永久可查！
如果您是以下情况，我们都能竭诚为您解决实际问题：【公司采用定金+余款的付款流程，以最大化保障您的利益，让您放心无忧】
1、在校期间，因各种原因未能顺利毕业，拿不到官方毕业证+微信95270640
2、面对父母的压力，希望尽快拿到维多利亚大学维多利亚大学毕业证成绩单；
3、不清楚流程以及材料该如何准备维多利亚大学维多利亚大学毕业证成绩单；
4、回国时间很长，忘记办理；
5、回国马上就要找工作，办给用人单位看；
6、企事业单位必须要求办理的；
面向美国乔治城大学毕业留学生提供以下服务:
【★维多利亚大学维多利亚大学毕业证成绩单毕业证、成绩单等全套材料，从防伪到印刷，从水印到钢印烫金，与学校100%相同】
【★真实使馆认证（留学人员回国证明），使馆存档可通过大使馆查询确认】
【★真实教育部认证，教育部存档，教育部留服网站可查】
【★真实留信认证，留信网入库存档，可查维多利亚大学维多利亚大学毕业证成绩单】
我们从事工作十余年的有着丰富经验的业务顾问，熟悉海外各国大学的学制及教育体系，并且以挂科生解决毕业材料不全问题为基础，为客户量身定制1对1方案，未能毕业的回国留学生成功搭建回国顺利发展所需的桥梁。我们一直努力以高品质的教育为起点，以诚信、专业、高效、创新作为一切的行动宗旨，始终把“诚信为主、质量为本、客户第一”作为我们全部工作的出发点和归宿点。同时为海内外留学生提供大学毕业证购买、补办成绩单及各类分数修改等服务；归国认证方面，提供《留信网入库》申请、《国外学历学位认证》申请以及真实学籍办理等服务，帮助众多莘莘学子实现了一个又一个梦想。
专业服务，请勿犹豫联系我
如果您真实毕业回国，对于学历认证无从下手，请联系我，我们免费帮您递交
诚招代理：本公司诚聘当地代理人员，如果你有业余时间，或者你有同学朋友需要，有兴趣就请联系我
你赢我赢，共创双赢
你做代理，可以帮助维多利亚大学同学朋友
你做代理，可以拯救维多利亚大学失足青年
你做代理，可以挽救维多利亚大学一个个人才
你做代理，你将是别人人生维多利亚大学的转折点
你做代理，可以改变自己，改变他人，给他人和自己一个机会嘿的笑连连说记得记得但别忘了拿奖状进城啊考试一结束山娃就迫不及待地给父亲挂电话：爸我拿奖了三好学生接我进城吧父亲果然没有食言第二天就请假回家接山娃离开爷爷奶奶的那一刻山娃又伤心得泪如雨下宛如军人奔赴前线般难舍和悲壮卧空调大巴挤长蛇列车山娃发现车上挤满了叽叽喳喳的同龄人皆一脸惊喜地四处瞅山娃不认识他们也无暇去套近乎一味地跟着父亲昼夜兼程第二天凌晨就辗转到了父亲的城哇父亲的城真的好大好美哟走出广州火父
在线制作加拿大萨省大学毕业证文凭证书实拍图原版一模一样
原版一模一样【微信：741003700 】【加拿大萨省大学毕业证文凭证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(QU毕业证)皇后大学毕业证如何办理
QU本科毕业证成绩单【微信95270640】办理皇后大学毕业证原版一模一样、QU毕业证制作【Q微信95270640】《皇后大学毕业证购买流程》《QU成绩单制作》皇后大学毕业证书QU毕业证文凭皇后大学
本科毕业证书,学历学位认证如何办理【留学国外学位学历认证、毕业证、成绩单、大学Offer、雅思托福代考、语言证书、学生卡、高仿教育部认证等一切高仿或者真实可查认证服务】代办国外（海外）英国、加拿大、美国、新西兰、澳大利亚、新西兰等国外各大学毕业证、文凭学历证书、成绩单、学历学位认证真实可查。
【实体公司】办皇后大学皇后大学本科毕业证成绩单学历认证学位证文凭认证办留信网认证办留服认证办教育部认证（网上可查实体公司专业可靠）
— — — 留学归国服务中心 — — -
【主营项目】
一.皇后大学毕业证成绩单使馆认证教育部认证成绩单等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
国外毕业证学位证成绩单办理流程：
1客户提供皇后大学皇后大学本科毕业证成绩单办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
专业服务请勿犹豫联系我！本公司是留学创业和海归创业者们的桥梁。一次办理终生受用一步到位高效服务。详情请在线咨询办理,欢迎有诚意办理的客户咨询!洽谈。
招聘代理：本公司诚聘英国加拿大澳洲新西兰美国法国德国新加坡各地代理人员如果你有业余时间有兴趣就请联系我们咨询顾问：+微信:95270640开始山娃就知道父亲的家和工地共有一个很动听的名字——天河工地的底层空空荡荡很宽阔很凉爽在地上铺上报纸和水泥袋父亲和工人们中午全睡在地上地面坑坑洼洼山娃曾多次绊倒过也曾有长铁钉穿透凉鞋刺在脚板上但山娃不怕工地上也常有五六个从乡下来的小学生他们的父母亲也是高楼上的建筑工人小伙伴来自不同省份都操着带有浓重口音的普通话可不知为啥山娃不仅很快与他们熟识起来还成了无话不谈的好朋友可惜快乐的时光总是太短太匆忙吹
一比一原版(TMU毕业证)多伦多都会大学毕业证如何办理
TMU本科学位证成绩单【微信95270640】☀️原版仿制多伦多都会大学毕业证书扫描件本科学位证书【办证Q微信95270640】TMU毕业证书扫描件原版仿制毕业成绩单，能完美还原海外各大学TMUBachelor Diploma degree, Master Diploma（本科/硕士多伦多都会大学毕业证书、成绩单）TMU大学Offer录取通知书、雅思成绩单、托福成绩单、雅思托福代考、语言证书、学生卡、高仿留服认证书等毕业/入学/在读材料。1:1完美还原海外各大学毕业材料上的多伦多都会大学毕业证书扫描件本科学位证书TMU毕业证书扫描件原版仿制毕业成绩单工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪。
【本科硕士】多伦多都会大学多伦多都会大学毕业证学位证（GPA修改）；学历认证（教育部认证）；大学Offer录取通知书留信认证使馆认证；雅思语言证书等高仿类证书。
办理流程：
1客户提供办理多伦多都会大学多伦多都会大学毕业证学位证信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
真实网上可查的证明材料
1教育部学历学位认证留服官网真实存档可查永久存档。
2留学回国人员证明（使馆认证）使馆网站真实存档可查。
我们对海外大学及学院的毕业证成绩单所使用的材料尺寸大小防伪结构（包括：多伦多都会大学多伦多都会大学毕业证学位证隐形水印阴影底纹钢印LOGO烫金烫银LOGO烫金烫银复合重叠。文字图案浮雕激光镭射紫外荧光温感复印防伪）都有原版本文凭对照。质量得到了广大海外客户群体的认可同时和海外学校留学中介做到与时俱进及时掌握各大院校的（毕业证成绩单资格证结业证录取通知书在读证明等相关材料）的版本更新信息能够在第一时间掌握最新的海外学历文凭的样版尺寸大小纸张材质防伪技术等等并在第一时间收集到原版实物以求达到客户的需求。
本公司还可以按照客户原版印刷制作且能够达到客户理想的要求。有需要办理证件的客户请联系我们在线客服中心微信：95270640 或咨询在线高楼最底屋最下面很矮很黑是很不显眼的地下室父亲的家安在别人脚底下须绕过高楼旁边的垃圾堆下八个台阶才到父亲的家很狭小除了一张单人床和一张小方桌几乎没有多余的空间山娃一下子就联想起学校的男小便处山娃很想笑却怎么也笑不出来山娃很迷惑父亲的家除了一扇小铁门连窗户也没有墓穴一般阴森森有些骇人父亲的城也便成了山娃的城父亲的家也便成了山娃的家父亲让山娃呆在屋里做作业看电视最多只能在门口透透气不能跟陌生人搭腔更家
原版制作(RMIT毕业证书)墨尔本皇家理工大学毕业证在读证明一模一样
学校原件一模一样【微信：741003700 】《(RMIT毕业证书)墨尔本皇家理工大学毕业证在读证明》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(SFU毕业证)西蒙弗雷泽大学毕业证如何办理
SFU硕士毕业证成绩单【微信95270640】《西蒙弗雷泽大学毕业证书原版制作SFU成绩单》【Q微信95270640】《仿制SFU毕业证成绩单西蒙弗雷泽大学学位证书pdf电子图》，A.为什么留学生需要操作留信认证?
留信认证全称全国留学生信息服务网认证,隶属于北京中科院。①留信认证门槛条件更低,费用更美丽,并且包过,完单周期短,效率高②留信认证虽然不能去国企,但是一般的公司都没有问题,因为国内很多公司连基本的留学生学历认证都不了解。这对于留学生来说,这就比自己光拿一个证书更有说服力,因为留学学历可以在留信网站上进行查询!
B.为什么我们提供的毕业证成绩单具有使用价值？
查询留服认证是国内鉴别留学生海外学历的唯一途径，但认证只是个体行为，不是所有留学生都操作，所以没有办理认证的留学生的学历在国内也是查询不到的，他们也仅仅只有一张文凭。所以这时候我们提供的和学校颁发的一模一样的毕业证成绩单，就有了使用价值。
实体公司，专业可靠，办理加拿大毕业证|办美国成绩单|做德国文凭学历认证|办新西兰学位证，办澳洲文凭认证，办留信网认证（网上可查，实体公司，专业可靠）铸就十年品质！信誉！实体公司！
[留学文凭学历认证(留信认证使馆认证)西蒙弗雷泽大学毕业证成绩单毕业证证书大学Offer请假条成绩单语言证书国际回国人员证明高仿教育部认证申请学校等一切高仿或者真实可查认证服务。
多年留学服务公司,拥有海外样板无数能完美1:1还原海外各国大学degreeDiplomaTranscripts等毕业材料。海外大学毕业材料都有哪些工艺呢？工艺难度主要由：烫金.钢印.底纹.水印.防伪光标.热敏防伪等等组成。而且我们每天都在更新海外文凭的样板以求所有同学都能享受到完美的品质服务。
国外毕业证学位证成绩单办理方法：
1客户提供办理西蒙弗雷泽大学西蒙弗雷泽大学毕业证假文凭信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
— — — — 我们是挂科和未毕业同学们的福音我们是实体公司精益求精的工艺！ — — — -
一真实留信认证的作用(私企外企荣誉的见证):
1：该专业认证可证明留学生真实留学身份同时对留学生所学专业等级给予评定。
2：国家专业人才认证中心颁发入库证书这个入网证书并且可以归档到地方。
3：凡是获得留信网入网的信息将会逐步更新到个人身份内将在公安部网内查询个人身份证信息后同步读取人才网入库信息。
4：个人职称评审加20分个人信誉贷款加10分。
5：在国家人才网主办的全国网络招聘大会中纳入资料供国家500强等高端企业选择人才。娃没到过没资格跟小伙伴们争论在山娃的记忆深处只有过年时父亲才会在家呆上三五天无奈相聚的时光总是太短太匆忙记得今年正月就在父亲扛起蛇皮袋将要跨出门槛的一刹那山娃突然抱紧父亲的大腿嚎啕大哭父亲吃力地掰开山娃的手哽咽道山娃好好听话好好念书到了暑假爸也接你进城爸的城好远好大好美山娃于是天天扳着手指算计着读书也格外刻苦无奈时间总过得太慢太慢每次父亲往家打电话山娃总抢着接听一个劲地提醒父亲别忘了正月说的话电涌
MISS TEEN GONDA 2024 - WINNER ABHA VISHWAKARMA
Abha Vishwakarma, a rising star from Uttar Pradesh, has been selected as the victor from Gonda for Miss High Schooler India 2024. She is a glad representative of India, having won the title through her commitment and efforts in different talent competitions conducted by DK Exhibition, where she was crowned Miss Gonda 2024.
官方认证美国旧金山州立大学毕业证学位证书案例原版一模一样
原版一模一样【微信：741003700 】【美国旧金山州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
Exploring Career Paths in Cybersecurity for Technical Communicators
Exploring Career Paths in Cybersecurity for Technical Communicators
thyroid case presentation.pptx Kamala's Lakshaman palatial
thyroid case presentation.pptx Kamala's Lakshaman palatial
'Guidance and counselling- role of Psychologist in Guidance and Counselling.
'Guidance and counselling- role of Psychologist in Guidance and Counselling.
RCQ Plant Report.pptx
- 1. RCQ Plant Report The purpose of this slideshow is to help add uniformity to the plant reports. I will cover the report in it’s entirety.
- 2. Production & Downtime First We will cover this area. Obviously write the date. You may notice that all times are in 15 minute incremates. This is because the time tracking system our company uses only goes to the nearest quarter hour. So whenever logging time please round it to the nearest quarter hour. Another important thing to note is how the downtime is structured. Please remember to include what is causing downtime and why. For morning maintenance periods it is important to note the projects worked on during this time. Lastly, it is imperative that we include Startup/Inspection time in the report. 5/8/20 5:00 5:30 Safety/Ops Meeting 5:30 7:15 Maint: Housekeeping catwalks 7:15 7:45 Production 1:30 2:45 CR 1: Belt Stopped 2:45 4:30 Production 4:30 5:00 Shutdown Startup/Inspection 7:45 1:30
- 3. Crew & Load Count This one is pretty straight forward. Note that this should include everyone except Wayne and Myself. Load Count is pretty self explanatory. Louie Kyle. R Kyle. M Doug Kenny Cat Jon Robert Gary Brent 29 41 5/8/20 5:00 5:30 Safety/Ops Meeting 5:30 7:15 Maint: Housekeeping catwalks 7:15 7:45 Production 1:30 2:45 CR 1: Belt Stopped 2:45 4:30 Production 4:30 5:00 Shutdown Startup/Inspection 7:45 1:30
- 4. Fuel Starting at the top, mark the tank level down using U.S. imperial measurements. Next under the Gen fuel section, it is extremely important to include the entire readout, including the decimal and after. Hours are also self explanatory. Louie Kyle. R Kyle. M Doug Kenny Cat Jon Robert Gary Brent 29 41 16’8” 78,052.7 77,598.2 5000 4095 5/8/20 5:00 5:30 Safety/Ops Meeting 5:30 7:15 Maint: Housekeeping catwalks 7:15 7:45 Production 1:30 2:45 CR 1: Belt Stopped 2:45 4:30 Production 4:30 5:00 Shutdown Startup/Inspection 7:45 1:30
- 5. Products, Water, & Dust Control Starting with products: • Primary: Material that comes off of Structural belt. Usually Class 6 or Str Fill. • Secondaries: Anything that comes off of a belt after cone processing. Dust Control: Initial the box to state you have done inspection. Write down any problems and corrections that have occurred below. If no problems write something to the effect of “All Good” Water: Loads and load source. Louie Kyle. R Kyle. M Doug Kenny Cat Jon Robert Gary Brent 29 41 16’8” 78,052.7 77,598.2 5000 4095 Class 6 1/2 1/2 3/4 3/4 Fines 1: Big Tanker BW 10-4 Rubber Ducky 5/8/20 5:00 5:30 Safety/Ops Meeting 5:30 7:15 Maint: Housekeeping catwalks 7:15 7:45 Production 1:30 2:45 CR 1: Belt Stopped 2:45 4:30 Production 4:30 5:00 Shutdown Startup/Inspection 7:45 1:30
- 6. Repairs Needed Simply a place to note minor repairs that can be completed on the next maintenance period. Louie Kyle. R Kyle. M Doug Kenny Cat Jon Robert Gary Brent 29 41 16’8” 78,052.7 77,598.2 5000 4095 Class 6 1/2 1/2 3/4 3/4 Fines 1: Big Tanker BW 10-4 Rubber Ducky • Flexcos on 8’ Underscreen • Rubber on CR screen 5/8/20 5:00 5:30 Safety/Ops Meeting 5:30 7:15 Maint: Housekeeping catwalks 7:15 7:45 Production 1:30 2:45 CR 1: Belt Stopped 2:45 4:30 Production 4:30 5:00 Shutdown Startup/Inspection 7:45 1:30
- 7. Here it is fellas Any Questions? Louie Kyle. R Kyle. M Doug Kenny Cat Jon Robert Gary Brent 29 41 16’8” 78,052.7 77,598.2 5000 4095 Class 6 1/2 1/2 3/4 3/4 Fines 1: Big Tanker BW 10-4 Rubber Ducky • Flexcos on 8’ Underscreen • Rubber on CR screen 5/8/20 5:00 5:30 Safety/Ops Meeting 5:30 7:15 Maint: Housekeeping catwalks 7:15 7:45 Production 1:30 2:45 CR 1: Belt Stopped 2:45 4:30 Production 4:30 5:00 Shutdown Startup/Inspection 7:45 1:30