Joseph Doherty has over 35 years of experience in occupational safety, health, and environmental management. He most recently served for 18 years as the Occupational Safety, Health, and Environmental Manager for Main Industries Inc., where he was responsible for safety programs covering over 200 employees. He holds numerous safety certifications and has received achievement medals for his safety performance while serving in the US Navy. He is seeking a new position involving occupational safety, health, and environmental responsibilities.
This Slideshare presentation is a partial preview of the full business document. To view and download the full document, please go here:
http://flevy.com/browse/business-document/health-safety-and-environmental-management-plan-330
This document is a 30 page health, safety and environmental management plan that will provides organisations with a very solid framework for managing health, safety and environmental risk.
The key elements include: HSE policy, risk management, management responsibilities, incident investigation, injury reporting, training and competency, emergency management, sub-contractor management, communication and consultation, occupational health, processes for work practices, monitoring and review.
Once downloaded this document can be enhanced by purchasing a number of forms, registers, checklist or templates from this site.
This document present excellent value for money for the perspective client; to draft a document of similar quality would cost several thousands of dollars in man hours. However, you will need to tailor this HSE management plan to your organisation as well to any relevant legislation, standards or codes.
This document will suit medium to large businesses, or the small business owner looking to step up their HSE compliance or improve their chance of winning work with high end clients.
The savvy buyer will recognise value for money in this document.
This document outlines the pre-construction planning process for occupational safety and health on a construction project. It discusses examining contract documents to identify safety constraints, conducting a risk assessment to determine hazardous operations and high-risk tasks. It also covers planning logistics like site layout, temporary facilities, equipment needs, and storage areas. The document emphasizes that thorough pre-construction planning is important for budgeting, preparation, and proactively managing OSH risks during the work. Effective planning helps implement basic OSH requirements and make necessary arrangements to protect workers and others on-site.
Feroz Bin Musa is applying for a safety engineer position and has over 5 years of experience in occupational health and safety. He has extensive experience developing and implementing safety policies, conducting inspections, investigating incidents, and providing safety training. He reduced incident rates by 50% in his previous role at Malaysia Marine Heavy Engineering Berhad. He is licensed and certified in first aid, CPR, and as a safety instructor for various topics.
David Stroud is a Health & Safety Director with over 20 years of experience spearheading safety projects at large construction sites. He has managed safety programs for companies in various industries, including oil and gas, petrochemical, and engineering. His experience includes implementing safety programs, conducting audits and inspections, investigating incidents, and ensuring regulatory compliance. He is pursuing a position where he can lead Environmental, Health and Safety efforts for a company with a diverse client roster.
This document outlines the health, safety, and environmental (HSE) plan for the Kikeh Spar hook-up and commissioning project. It details the HSE goals, responsibilities, programs, and activities that will be implemented. The key objectives of the HSE plan are to ensure compliance with regulations and prevent incidents in order to maintain safety during all project phases. The plan describes the HSE management system, training, monitoring, emergency response procedures, and other important elements that will be followed.
Kerry Konjevich is an experienced Occupational Safety and Environmental Health Specialist seeking a new position to apply strong project management skills. Konjevich has over 20 years of experience in the public safety sector, developing processes and standards to improve public health and safety. Some of Konjevich's accomplishments include developing and implementing safety programs and policies, conducting inspections and eliminating health hazards, and creating standard operating procedures to ensure personnel readiness. Konjevich holds multiple certifications in areas like OSHA, HAZMAT handling, and environmental health and has a Bachelor's degree in Occupational Safety and Health as well as an ongoing Master's degree.
George Jvarsheishvili has over 17 years of experience in health, safety, and environment roles in the oil and gas industry. He currently works as an HSE Coordinator for a drilling project in Saudi Arabia, where his responsibilities include ensuring safety plans and procedures are implemented, conducting audits and inspections, delivering training, supervising hazard control, and investigating accidents. Previously he held HSE supervisory and officer roles in Kazakhstan, Italy, Saudi Arabia, Georgia, and the UK, where he was responsible for developing and enforcing safety programs, conducting risk assessments, emergency response training, and environmental compliance.
This document provides an overview of safety and environmental management practices in the upstream oil and gas industry. It discusses the health, safety, and environmental policy of ONGC, terms used in the industry, causes of accidents, major activities (drilling, production, exploration), and safety practices for each. It also covers risk assessment and analysis, technologies to enhance fire and life safety, and concludes by emphasizing the importance of addressing potential health risks early in project planning processes.
This Slideshare presentation is a partial preview of the full business document. To view and download the full document, please go here:
http://flevy.com/browse/business-document/health-safety-and-environmental-management-plan-330
This document is a 30 page health, safety and environmental management plan that will provides organisations with a very solid framework for managing health, safety and environmental risk.
The key elements include: HSE policy, risk management, management responsibilities, incident investigation, injury reporting, training and competency, emergency management, sub-contractor management, communication and consultation, occupational health, processes for work practices, monitoring and review.
Once downloaded this document can be enhanced by purchasing a number of forms, registers, checklist or templates from this site.
This document present excellent value for money for the perspective client; to draft a document of similar quality would cost several thousands of dollars in man hours. However, you will need to tailor this HSE management plan to your organisation as well to any relevant legislation, standards or codes.
This document will suit medium to large businesses, or the small business owner looking to step up their HSE compliance or improve their chance of winning work with high end clients.
The savvy buyer will recognise value for money in this document.
This document outlines the pre-construction planning process for occupational safety and health on a construction project. It discusses examining contract documents to identify safety constraints, conducting a risk assessment to determine hazardous operations and high-risk tasks. It also covers planning logistics like site layout, temporary facilities, equipment needs, and storage areas. The document emphasizes that thorough pre-construction planning is important for budgeting, preparation, and proactively managing OSH risks during the work. Effective planning helps implement basic OSH requirements and make necessary arrangements to protect workers and others on-site.
Feroz Bin Musa is applying for a safety engineer position and has over 5 years of experience in occupational health and safety. He has extensive experience developing and implementing safety policies, conducting inspections, investigating incidents, and providing safety training. He reduced incident rates by 50% in his previous role at Malaysia Marine Heavy Engineering Berhad. He is licensed and certified in first aid, CPR, and as a safety instructor for various topics.
David Stroud is a Health & Safety Director with over 20 years of experience spearheading safety projects at large construction sites. He has managed safety programs for companies in various industries, including oil and gas, petrochemical, and engineering. His experience includes implementing safety programs, conducting audits and inspections, investigating incidents, and ensuring regulatory compliance. He is pursuing a position where he can lead Environmental, Health and Safety efforts for a company with a diverse client roster.
This document outlines the health, safety, and environmental (HSE) plan for the Kikeh Spar hook-up and commissioning project. It details the HSE goals, responsibilities, programs, and activities that will be implemented. The key objectives of the HSE plan are to ensure compliance with regulations and prevent incidents in order to maintain safety during all project phases. The plan describes the HSE management system, training, monitoring, emergency response procedures, and other important elements that will be followed.
Kerry Konjevich is an experienced Occupational Safety and Environmental Health Specialist seeking a new position to apply strong project management skills. Konjevich has over 20 years of experience in the public safety sector, developing processes and standards to improve public health and safety. Some of Konjevich's accomplishments include developing and implementing safety programs and policies, conducting inspections and eliminating health hazards, and creating standard operating procedures to ensure personnel readiness. Konjevich holds multiple certifications in areas like OSHA, HAZMAT handling, and environmental health and has a Bachelor's degree in Occupational Safety and Health as well as an ongoing Master's degree.
George Jvarsheishvili has over 17 years of experience in health, safety, and environment roles in the oil and gas industry. He currently works as an HSE Coordinator for a drilling project in Saudi Arabia, where his responsibilities include ensuring safety plans and procedures are implemented, conducting audits and inspections, delivering training, supervising hazard control, and investigating accidents. Previously he held HSE supervisory and officer roles in Kazakhstan, Italy, Saudi Arabia, Georgia, and the UK, where he was responsible for developing and enforcing safety programs, conducting risk assessments, emergency response training, and environmental compliance.
This document provides an overview of safety and environmental management practices in the upstream oil and gas industry. It discusses the health, safety, and environmental policy of ONGC, terms used in the industry, causes of accidents, major activities (drilling, production, exploration), and safety practices for each. It also covers risk assessment and analysis, technologies to enhance fire and life safety, and concludes by emphasizing the importance of addressing potential health risks early in project planning processes.
Stuart Manuel has over a decade of experience in safety management across various industries including waste management, environmental services, oil and gas, and the military. He has a master's degree in occupational safety and health and is OSHA-certified. Manuel has held roles managing safety programs, conducting inspections and testing, developing corrective action plans, and training personnel. Currently he works as a plant operator for a waste services company, supporting safe operations and ensuring regulatory compliance.
Clyde Mayo has over 25 years of experience in safety leadership roles across various industries. He specializes in establishing safe work environments through inspections, permit to work systems, risk assessments, and safety training. Mayo seeks to encourage a culture where safety is a core value and employees take personal ownership. He has held safety coordinator and specialist roles ensuring compliance with regulations and reducing incidents. Mayo is currently pursuing a Bachelor's degree in Occupational Safety and Health while working as a safety manager.
Petronas health, safety and environment guidelines (HSE)Easwaran Kanason
This document outlines PETRONAS' procedures and guidelines for managing health, safety, and environment (HSE) in upstream petroleum operations. It requires contractors to have a documented health, safety, and environment management system (HSEMS) that meets PETRONAS' requirements. The HSEMS must be integrated into all phases of exploration and production and address elements like leadership commitment, risk management, emergency planning, performance monitoring, and regular reviews. The document also details PETRONAS' inspection and audit rights and contractors' obligations around incident reporting and key performance indicators.
This document discusses safety auditing and provides guidance on how to conduct effective safety audits. It outlines the objectives and principles of advanced safety auditing, including using all the senses to observe employees, having open communication, and making agreements to correct any unsafe behaviors. It also describes the audit process, categories to observe, and techniques for interventions, coaching, and reinforcing safe performance. The overall aim is to promote a safety culture in the workplace.
This document provides guidelines and policies for ensuring occupational health, safety, and environmental protection at OGDCL oil and gas development and production sites. It states that safety is everyone's responsibility and outlines guidelines for permits, personal protective equipment, working at heights, energy isolation, confined spaces, lifting operations, and more. The document aims to promote a positive safety culture and compliance with relevant laws and regulations to protect employees, communities, and the environment.
Pedro Fernandes is an experienced senior environmental, health, and safety professional with over 25 years of experience in regulatory compliance, industrial hygiene, and safety management. He has held safety leadership roles at pharmaceutical, facilities management, food and beverage, and consulting companies. Fernandes has a Master's in Public Health and extensive knowledge of EPA, OSHA, NFPA, and other regulations.
This document provides a summary of Rick A. Christopherson's experience and qualifications as an Environmental, Health, and Safety professional. It outlines his relevant work history over the past decade in various roles for companies like CB&I Construction, KHMA Power Construction, Bechtel Power Construction, Stone and Webster Corporation, Volt Technical Services, AES Huntington Beach Generating Station, and Southern California Edison Company. It highlights his expertise in areas like safety management, training, compliance, investigation, and support for projects in industries like power generation, transmission, and nuclear facilities.
This document outlines the safety, health, environment and security plan for PT. Karinda Daya Perkasa. It discusses establishing a SHE management system to ensure work is performed safely and healthily. The contractor will base their site SHE program on 5 pillars: identifying risks, cultivating a safety culture, supervision, following safe work procedures, and inspections/audits. The plan also discusses organizing a safety committee, coordination internally and externally, and implementing programs like basic SHE rules, training, permitting, fire prevention and emergency response.
The document discusses oilfield safety, providing information on safety programs, inspections, meetings, hazard awareness, abatement, accident investigation and reporting, and personal protective equipment. It emphasizes that safety is important in oilfield work due to the hazardous nature of machinery, tools and physical demands. Over 90% of accidents are avoidable through developing a sense of safety and good judgment. Hazard identification, recognition and abatement methods are outlined.
This document provides an introduction to health, safety and environmental issues in the oil and gas industry. It discusses why HSE is important given the high-risk nature of the work and potential for catastrophic accidents. Two examples of major accidents, the Piper Alpha platform explosion and Deepwater Horizon oil spill, are described to illustrate the risks. The document then covers hazard identification and risk assessment processes used in the industry. It provides examples of common hazards and approaches to controlling risks, including the use of engineering solutions, administrative controls and personal protective equipment. Training requirements for workers and definitions of key terms like incidents and near misses are also outlined.
Elmer P. Oliva is a certified HSE officer with over 10 years of experience implementing safety procedures in construction projects in the UAE and Qatar. He has extensive training and certifications in occupational safety and health. His responsibilities have included safety inspections, investigations, training, permitting, and ensuring compliance with regulations. He is currently working as an HSE officer for TAV Construction in the UAE.
BINAPURI OSH Management System Awareness Trainingmuss
This document outlines the objectives and roadmap for Bina Puri Sdn Bhd and Bina Puri Construction Sdn Bhd to achieve Occupational Safety and Health Management System (OSHMS) certification according to OHSAS 18001 and MS 1722 standards. It discusses the integration of OSHMS documents with quality management systems, roles and responsibilities, audit processes, and accident management procedures. The overall goal is to minimize risks to employees and ensure compliance with legal requirements through a systematic OSH management approach.
The document provides a summary of Mohammed Ishraq's professional experience and qualifications. It outlines over 9 years of experience in health, safety, and environmental roles in the steel and construction industries in Qatar, UAE, and India. His responsibilities have included implementing safety programs and policies, conducting audits and inspections, investigating incidents, and providing training. He holds an IOSH qualification and is pursuing a NEBOSH certification.
This document outlines an HSE (Health, Safety, and Environment) plan for Alghanim Group of Shipping & Transport. It includes policies on company HSE, specific objectives, zero accident tolerance, and responsibilities of individuals like the Corporate HSE Manager and Operations Manager. The plan details AGST's responsibilities regarding HSE trainings, personnel, work stoppages, inspections, and programs. It also covers requirements for vehicles, marine operations, fire prevention, PPE, and more. The goal is to promote a safe working environment free of risks and ensure compliance with regulations.
The document outlines site HSE management plans and procedures for a safe construction project with the goal of zero accidents, harm to people, and environmental damage. It discusses defining workplace safety through regulatory compliance, ethics, and safety culture. It also covers hazard identification, risk mitigation, safe working procedures, HSE responsibilities, and ensuring compliance with international standards like ISO. The overall aim is to develop a comprehensive safety system and culture through cooperation between the client, main contractor, and all subcontractors on site.
The document describes an inspection conducted on 12/4/2016 of MMHE West yard, the largest fabrication yard in Malaysia, which found that while most health and safety systems were in good condition, there were five critical hazards identified - including risks from machinery, noise exposure, chemical storage, heat exposure, and lack of PPE - that required immediate corrective action from management to ensure compliance with relevant laws.
This document discusses various issues related to environment, health, and safety management. It covers topics like process safety, occupational health, safety management, hazards identification, risk assessment, safety standards and regulations, accident analysis, safety training, and benefits of occupational health and safety management systems. The key aspects of developing a proactive safety culture in organizations are also highlighted.
This document provides the health, safety, and environmental manual for C&C Technologies, Inc. It outlines the company's policies and procedures around leadership and commitment to HSE, legislation and compliance, organizational structure and responsibilities, risk evaluation and management, planning and implementation of HSE programs, monitoring and implementation, auditing, and appendices including emergency response plans and forms. The manual is intended to establish minimum guidelines to protect employee health and safety and prevent accidents and injuries.
No.3 presentatation for occupational health and safety proceduresRodrigo Butad
This document discusses occupational safety and health standards. It defines safety as the physical conditions of work that comply with safety standards and allow workers to perform their jobs without hazards. Health means the sound mental and physical state of workers to do their jobs normally. The purpose of occupational safety and health standards is to provide minimum protection for workers from injury, sickness or death on the job through enforcing rules to eliminate or reduce hazards. The document discusses identifying hazards in the workplace, substances that can harm workers, and evaluating hazards and risks through examining chemical, physical and biological properties of substances.
The document summarizes the student's experiences at three different schools from 4th grade to present. Lloyd Elementary School had fun gym classes and good teachers. At Northwest Middle School, the student met their best friend, and it helped with social skills. Lane Tech College Prep is where the student wants to attend next year due to its academics and clubs like ROTC and academic decathlon. The student's future plans include getting a full college scholarship, becoming a pediatrician, moving to Puerto Rico, graduating college, owning a funeral home, and owning a beach house.
Imagine a world without maxis! What would happen to summer bunches and day to night dressing. Maxis are to summers what water is to life. With this trend making a major comeback every season, here are five summer perfect ways on how to style this staple item in your wardrobe- https://thepotplant.in/
Stuart Manuel has over a decade of experience in safety management across various industries including waste management, environmental services, oil and gas, and the military. He has a master's degree in occupational safety and health and is OSHA-certified. Manuel has held roles managing safety programs, conducting inspections and testing, developing corrective action plans, and training personnel. Currently he works as a plant operator for a waste services company, supporting safe operations and ensuring regulatory compliance.
Clyde Mayo has over 25 years of experience in safety leadership roles across various industries. He specializes in establishing safe work environments through inspections, permit to work systems, risk assessments, and safety training. Mayo seeks to encourage a culture where safety is a core value and employees take personal ownership. He has held safety coordinator and specialist roles ensuring compliance with regulations and reducing incidents. Mayo is currently pursuing a Bachelor's degree in Occupational Safety and Health while working as a safety manager.
Petronas health, safety and environment guidelines (HSE)Easwaran Kanason
This document outlines PETRONAS' procedures and guidelines for managing health, safety, and environment (HSE) in upstream petroleum operations. It requires contractors to have a documented health, safety, and environment management system (HSEMS) that meets PETRONAS' requirements. The HSEMS must be integrated into all phases of exploration and production and address elements like leadership commitment, risk management, emergency planning, performance monitoring, and regular reviews. The document also details PETRONAS' inspection and audit rights and contractors' obligations around incident reporting and key performance indicators.
This document discusses safety auditing and provides guidance on how to conduct effective safety audits. It outlines the objectives and principles of advanced safety auditing, including using all the senses to observe employees, having open communication, and making agreements to correct any unsafe behaviors. It also describes the audit process, categories to observe, and techniques for interventions, coaching, and reinforcing safe performance. The overall aim is to promote a safety culture in the workplace.
This document provides guidelines and policies for ensuring occupational health, safety, and environmental protection at OGDCL oil and gas development and production sites. It states that safety is everyone's responsibility and outlines guidelines for permits, personal protective equipment, working at heights, energy isolation, confined spaces, lifting operations, and more. The document aims to promote a positive safety culture and compliance with relevant laws and regulations to protect employees, communities, and the environment.
Pedro Fernandes is an experienced senior environmental, health, and safety professional with over 25 years of experience in regulatory compliance, industrial hygiene, and safety management. He has held safety leadership roles at pharmaceutical, facilities management, food and beverage, and consulting companies. Fernandes has a Master's in Public Health and extensive knowledge of EPA, OSHA, NFPA, and other regulations.
This document provides a summary of Rick A. Christopherson's experience and qualifications as an Environmental, Health, and Safety professional. It outlines his relevant work history over the past decade in various roles for companies like CB&I Construction, KHMA Power Construction, Bechtel Power Construction, Stone and Webster Corporation, Volt Technical Services, AES Huntington Beach Generating Station, and Southern California Edison Company. It highlights his expertise in areas like safety management, training, compliance, investigation, and support for projects in industries like power generation, transmission, and nuclear facilities.
This document outlines the safety, health, environment and security plan for PT. Karinda Daya Perkasa. It discusses establishing a SHE management system to ensure work is performed safely and healthily. The contractor will base their site SHE program on 5 pillars: identifying risks, cultivating a safety culture, supervision, following safe work procedures, and inspections/audits. The plan also discusses organizing a safety committee, coordination internally and externally, and implementing programs like basic SHE rules, training, permitting, fire prevention and emergency response.
The document discusses oilfield safety, providing information on safety programs, inspections, meetings, hazard awareness, abatement, accident investigation and reporting, and personal protective equipment. It emphasizes that safety is important in oilfield work due to the hazardous nature of machinery, tools and physical demands. Over 90% of accidents are avoidable through developing a sense of safety and good judgment. Hazard identification, recognition and abatement methods are outlined.
This document provides an introduction to health, safety and environmental issues in the oil and gas industry. It discusses why HSE is important given the high-risk nature of the work and potential for catastrophic accidents. Two examples of major accidents, the Piper Alpha platform explosion and Deepwater Horizon oil spill, are described to illustrate the risks. The document then covers hazard identification and risk assessment processes used in the industry. It provides examples of common hazards and approaches to controlling risks, including the use of engineering solutions, administrative controls and personal protective equipment. Training requirements for workers and definitions of key terms like incidents and near misses are also outlined.
Elmer P. Oliva is a certified HSE officer with over 10 years of experience implementing safety procedures in construction projects in the UAE and Qatar. He has extensive training and certifications in occupational safety and health. His responsibilities have included safety inspections, investigations, training, permitting, and ensuring compliance with regulations. He is currently working as an HSE officer for TAV Construction in the UAE.
BINAPURI OSH Management System Awareness Trainingmuss
This document outlines the objectives and roadmap for Bina Puri Sdn Bhd and Bina Puri Construction Sdn Bhd to achieve Occupational Safety and Health Management System (OSHMS) certification according to OHSAS 18001 and MS 1722 standards. It discusses the integration of OSHMS documents with quality management systems, roles and responsibilities, audit processes, and accident management procedures. The overall goal is to minimize risks to employees and ensure compliance with legal requirements through a systematic OSH management approach.
The document provides a summary of Mohammed Ishraq's professional experience and qualifications. It outlines over 9 years of experience in health, safety, and environmental roles in the steel and construction industries in Qatar, UAE, and India. His responsibilities have included implementing safety programs and policies, conducting audits and inspections, investigating incidents, and providing training. He holds an IOSH qualification and is pursuing a NEBOSH certification.
This document outlines an HSE (Health, Safety, and Environment) plan for Alghanim Group of Shipping & Transport. It includes policies on company HSE, specific objectives, zero accident tolerance, and responsibilities of individuals like the Corporate HSE Manager and Operations Manager. The plan details AGST's responsibilities regarding HSE trainings, personnel, work stoppages, inspections, and programs. It also covers requirements for vehicles, marine operations, fire prevention, PPE, and more. The goal is to promote a safe working environment free of risks and ensure compliance with regulations.
The document outlines site HSE management plans and procedures for a safe construction project with the goal of zero accidents, harm to people, and environmental damage. It discusses defining workplace safety through regulatory compliance, ethics, and safety culture. It also covers hazard identification, risk mitigation, safe working procedures, HSE responsibilities, and ensuring compliance with international standards like ISO. The overall aim is to develop a comprehensive safety system and culture through cooperation between the client, main contractor, and all subcontractors on site.
The document describes an inspection conducted on 12/4/2016 of MMHE West yard, the largest fabrication yard in Malaysia, which found that while most health and safety systems were in good condition, there were five critical hazards identified - including risks from machinery, noise exposure, chemical storage, heat exposure, and lack of PPE - that required immediate corrective action from management to ensure compliance with relevant laws.
This document discusses various issues related to environment, health, and safety management. It covers topics like process safety, occupational health, safety management, hazards identification, risk assessment, safety standards and regulations, accident analysis, safety training, and benefits of occupational health and safety management systems. The key aspects of developing a proactive safety culture in organizations are also highlighted.
This document provides the health, safety, and environmental manual for C&C Technologies, Inc. It outlines the company's policies and procedures around leadership and commitment to HSE, legislation and compliance, organizational structure and responsibilities, risk evaluation and management, planning and implementation of HSE programs, monitoring and implementation, auditing, and appendices including emergency response plans and forms. The manual is intended to establish minimum guidelines to protect employee health and safety and prevent accidents and injuries.
No.3 presentatation for occupational health and safety proceduresRodrigo Butad
This document discusses occupational safety and health standards. It defines safety as the physical conditions of work that comply with safety standards and allow workers to perform their jobs without hazards. Health means the sound mental and physical state of workers to do their jobs normally. The purpose of occupational safety and health standards is to provide minimum protection for workers from injury, sickness or death on the job through enforcing rules to eliminate or reduce hazards. The document discusses identifying hazards in the workplace, substances that can harm workers, and evaluating hazards and risks through examining chemical, physical and biological properties of substances.
The document summarizes the student's experiences at three different schools from 4th grade to present. Lloyd Elementary School had fun gym classes and good teachers. At Northwest Middle School, the student met their best friend, and it helped with social skills. Lane Tech College Prep is where the student wants to attend next year due to its academics and clubs like ROTC and academic decathlon. The student's future plans include getting a full college scholarship, becoming a pediatrician, moving to Puerto Rico, graduating college, owning a funeral home, and owning a beach house.
Imagine a world without maxis! What would happen to summer bunches and day to night dressing. Maxis are to summers what water is to life. With this trend making a major comeback every season, here are five summer perfect ways on how to style this staple item in your wardrobe- https://thepotplant.in/
Este documento presenta cuatro referencias bibliográficas relacionadas con el tema de la evaluación educativa. Incluye textos de Casanova sobre los conceptos y objetivos de la evaluación, lineamientos del Ministerio de Educación Nacional de Colombia sobre la implementación del Decreto 1290 de 2009, un artículo de Molina sobre los tipos de evaluación según su finalidad, y un texto de Toaquiza sobre Ralph Tyler como padre de la evaluación educativa.
This nursery rhyme lists common children's games and activities in a nonsensical order, including buckling shoes, shutting doors, picking up sticks, laying sticks straight, and references a big fat hen.
Clark Eriksson Associates Ltd provides safety integrity level (SIL) assessments and layers of protection analysis (LOPA) to determine safety instrumented system (SIS) requirements. They have in-house certified functional safety engineers who perform reliability analyses throughout the SIS lifecycle. Their services include SIL assessments, SIS specification, design, testing, installation, and verification to confirm the target SIL is achieved and maintained.
The Army is sampling drinking water outlets in Army Family Housing (AFH) units for lead as a proactive measure to protect children's health. This effort began in 2013 and aims to test 20% of AFH units annually over five years. While Army installations meet regulatory water testing standards, routine tests do not require individual testing of all outlets. Testing specific outlets can help identify potential lead issues and inform policy. Elevated lead levels above 15 parts per billion will trigger corrective actions like providing alternative water or installing filters. The goal is to ensure children's safety through detailed information on housing unit water quality.
Este documento proporciona información sobre los sistemas del cuerpo humano. Explica que un sistema está compuesto de elementos interrelacionados que interactúan entre sí. Luego describe brevemente los principales sistemas como el óseo, muscular, articular, circulatorio, respiratorio, digestivo y endocrino. Se enfoca en mayor detalle en los sistemas óseo y muscular, describiendo las características y funciones de los huesos y músculos. Incluye tablas y guías de trabajo para la identificación de huesos y músc
Esta presentacion consta en lo que hicimos todo el semestre en la materia de gimnasia en cual estamos describiendo para que sirve la gimnasia en sus diferentes ramas y aspectos.
Networking devices like hubs, switches, routers, and gateways interconnect networks and manage data flow. Hubs operate at the physical layer and connect segments but do not filter traffic. Switches operate at the data link layer and can direct traffic to specific ports for better performance than hubs. Routers operate at the network layer and can connect networks across LANs, MANs, and WANs using IP addressing to route packets. Gateways can operate at multiple layers and act as connections between different network protocols or applications.
In any SME manufacturing organizations, one of the major causes for low plant utilization is changeover loss.In this presentation, using SMED methodology, step by step process is given to reduce the changeover loss.Also shared the real examples of changeover loss reduction in various manufacturing industries using SMED concept.Hope this is useful for any organization struggling with low plant utilisation due to changeover loss..
Este documento resume los sistemas del cuerpo humano como el digestivo, respiratorio, circulatorio y renal, explicando sus funciones. También describe los nutrientes como carbohidratos, proteínas, lípidos y vitaminas, además de procesos como la digestión, ventilación pulmonar e intercambio gaseoso. Por último, ofrece recomendaciones para prevenir enfermedades y mantener un estilo de vida saludable.
Joe Doherty has over 18 years of experience as an Industrial Hygiene, Occupational Safety, Health and Environmental Manager and Supervisor. He served for 18.5 years in the US Navy as a Safety and Health Specialist. He is skilled in managing safety programs, conducting inspections, investigations, training, and ensuring regulatory compliance. He has extensive experience developing and implementing safety programs, procedures, and training for facilities, shipyards, and vessels.
Joe Doherty is seeking a position as an Interdisciplinary Engineer with the Department of the Navy. He has over 18 years of experience as a Safety Manager and Safety Supervisor in private industry, as well as 18.5 years of experience in the US Navy, including as a Safety Specialist. He possesses comprehensive knowledge and skills in occupational safety, health, and environmental programs applicable to military installations. He is proficient in troubleshooting complex electronic systems, utilizing various test equipment. Joe Doherty is highly qualified for the Interdisciplinary Engineer position based on his extensive engineering and safety experience.
This resume is for Anthonia Onome Akemu, an HSE professional with over 16 years of experience in refinery operations, maintenance, construction, engineering, vessel operations, logistics, safety, and environmental issues in the oil and gas sector. She has worked in various HSE roles for several companies, including her current role as an HSE supervisor for Intels Nigeria Limited since 2013. Her expertise includes environmental law, waste management, project management, safety inspections, security management, problem solving, risk control, and communication skills. She holds several safety certifications and has received achievement awards for her HSE supervision and leadership.
Duane S. Roe has over 22 years of experience in environmental safety and health with expertise in areas such as standards and regulations compliance, industrial hygiene, hazardous materials, and emergency response. He has worked as an instructor, consultant, and manager. Currently he teaches various environmental and OSHA classes and assists clients in maintaining regulatory compliance and workplace safety as a consultant. Previously he managed occupational health programs and led environmental compliance efforts for military acquisition programs.
This document contains the contact information, education history, skills, experience, and references of Kombe Moses Namuene. He has over 10 years of experience in health and safety roles, including his current position as Health and Safety Manager at H-Teli Cameroon since 2015. Previously he held safety roles at Gaz Du Cameroon and Austin Maritime Engineering. He has numerous safety certifications and speaks both English and French.
Valentine Fon Ndenge is applying for an Occupational Health and Safety position. He has over 11 years of experience in OHS roles in construction, oil and gas, and production industries. His experience includes developing and implementing safety plans, conducting inspections, investigations, audits, and training. He is bilingual in English and French and holds several safety certifications.
Rob Vincent has over 15 years of experience in safety management and coordination roles in the oil and gas industry. He has worked as a Safety Coordinator for Burrow Global and Strike Pipeline, a Safety Manager for First Solar, and a Project Safety Supervisor and Manager for Zachary Holdings and CCC Group. In these roles, he developed and implemented safety programs, policies, and training, conducted audits and inspections, investigated incidents, and ensured regulatory compliance. He has multiple safety certifications and is a member of safety professional associations.
The document is a resume for Patrick Tooch applying for a Site Safety and Health Officer position. It summarizes his experience over 30 years working in safety roles for construction, fitness, retail, and technology companies. He holds various safety certifications including OSHA 10 and 30, forklift operation, welding, and hazardous waste handling. His experience includes developing and enforcing safety procedures, conducting inspections and investigations, training personnel, and ensuring regulatory compliance. He aims to provide quality safety leadership and promote a safer work environment.
This document contains the resume of Ogbonna Chibueze Prince for the role of a Health, Safety and Environment professional. It outlines his work experience of 9 years in various HSE roles in Nigeria and the UK. It also lists his education qualifications which includes a degree from University of Benin and various HSE related certifications. The resume highlights his key responsibilities carried out in previous roles such as developing HSE policies, conducting audits and inspections, training employees on safety, and ensuring regulatory compliance.
Donald R. Osborne II has over 15 years of experience in environmental, health, and safety management across various industries. He has managed health and safety programs for field locations and conducted audits to ensure continuous safety improvement. Osborne has experience writing health and safety plans and emergency response procedures, as well as managing budgets and consultants. He is certified in several safety areas including hazardous materials and well control.
Kiran Sahebrao Desale is seeking a role in Environment, Health and Safety (EHS) with over 7 years of experience. He currently works as an Assistance Manager EHS at AB-InBev India Pvt. Ltd. in Pune. Previously he worked for 3.8 years as an Executive for Environment and Safety at Hindustan Coca- Cola Beverages Pvt. Ltd. in Wada (Mumbai). He has an Advanced Diploma in Industrial Safety and a Master's degree in Environmental Science & Technology. His expertise includes developing and implementing EHS management systems and providing training.
Patrion McMickle has over 3 years of experience in industrial hygiene and safety, conducting evaluations to identify hazards. Specialized skills include sampling and monitoring for chemicals, noise, dust, and radiation. Current role involves industrial hygiene surveys for the Navy through a DoD contract, performing evaluations, implementing controls, and entering data into the DOEHRS-IH system. Education includes a Master's in Environmental Health from Old Dominion University and a Bachelor's in Biology from Norfolk State University, with relevant coursework in industrial hygiene, environmental health, epidemiology, toxicology, and chemistry.
This document outlines the curriculum vitae of Nilesh D. Borse. It details his educational qualifications including postgraduate degrees in industrial safety, fire management, and business administration. It lists his current role as EHS Manager at E.I.DuPont India Pvt. Ltd where he has worked since 1999. The document provides an overview of his job profile, responsibilities, and experience leading safety, health and environmental programs at DuPont in accordance with international standards and regulatory compliance.
GLOBAL PROCESS SAFETY COMPLIANCE STARTS HERE WITH SIGMA-HSESigma-HSE (UK) Ltd
We provide expert consultancy advice and test data for organisations wishing to maintain and improve their process safety compliance. Our global reach, unrivalled expertise and multi-sector knowledge, make us the number one safety partner for your safety needs.
https://sigma-hse.com/
This document summarizes the qualifications and experience of an Oil & Gas Safety Professional with over 8 years of experience in both onshore and offshore roles. They have a history of training others in health, safety, security, and environmental best practices and 5 years of experience as an International Sales Manager meeting with clients around the world. They also have extensive experience implementing safety programs and ensuring zero incident work sites, as well as qualifications in areas like project management, safety law, and oil & gas management.
I have learnt about Organik Kimya, a Turkish chemical company that produces polymer emulsions and specialty chemicals. The company was founded in 1965 and focuses on environmental care, investing in technology and people. It aims to be a leading chemical company providing innovative solutions through sustainable partnerships. As part of an internship, I learned about occupational health and safety standards like ISO and OHSAS, and how the company applies controls and risk analysis to protect workers. This includes analyzing hazards, controlling the wastewater treatment plant, and inspecting filling and logistic plants. I gained an understanding of workplace hazards, health and safety management, and the role of specialists in ensuring standards are met.
The document discusses key elements for effective health and safety committees, including:
- Employers are responsible for maintaining a safe workplace while involving employees in developing policies. There should be no sanctions for safety-related activities.
- Common workplace hazards include chemical, biological, ergonomic, physical, and safety hazards. Data shows custodians face high injury rates.
- The hierarchy of controls from most to least effective are: engineering controls, administrative controls, and personal protective equipment.
- Major elements of an effective safety program are: management commitment and employee involvement; worksite analysis; hazard prevention and control; and safety training.
- OSHA regulations cover record keeping, hazard communication, bloodborne pathogens, asbestos
OHS_Lecture( health and safety rules1.pptxalizakashaf8
The document discusses key elements for effective health and safety committees, including:
- Employers are responsible for maintaining a safe workplace while involving employees in developing policies. There should be no sanctions for safety-related activities.
- Common workplace hazards include chemical, biological, ergonomic, physical, and safety hazards. Data shows custodians face high injury rates.
- The hierarchy of controls from most to least effective are: engineering controls, administrative controls, and personal protective equipment.
- Major elements of an effective safety program are: management commitment and employee involvement; worksite analysis; hazard prevention and control; and safety training.
- Regulations discussed include OSHA recordkeeping and standards on hazard communication, bloodborne pathogens
Marie Athey conducted an OSHA 30 Hour Outreach Training Program in Construction for Joseph Doherty on November 14, 2015. As an authorized OSHA trainer, Marie verified she conducted the class according to OSHA requirements and will document the class to obtain completion cards for students within 90 days. 360training.com is authorized by IACET to offer CEUs for the program.
The document is a cover letter from Joe Doherty applying for a Safety Manager position. It summarizes his 25+ years of experience in occupational safety and health, including expertise in OSHA standards, confined spaces, respirators, and heavy metals. It details his most recent 18-year experience as a Safety Supervisor/Manager where he oversaw safety programs and ensured compliance. It emphasizes his skills in developing and implementing comprehensive safety programs and protocols to protect employees and achieve regulatory compliance.
This document provides a summary of Joe Doherty's training and qualifications. It lists over 50 safety, industrial, and military trainings he has completed, along with certifications and qualifications in areas like OSHA, confined spaces, fall protection, and more. It also outlines his military career in the U.S. Navy from 1978 to 1996 including various trainings, qualifications, and awards received.
The document is a cover letter from Joe Doherty applying for a Safety Manager position. He has over 25 years of safety experience, including 18 years as a Safety Supervisor/Manager for a marine and industrial company. During his tenure at that company, they had zero serious OSHA citations, years with no lost time accidents, and passed several safety audits with no discrepancies. He was responsible for all safety programs and developed many safety programs and tools for that company. He is offering his extensive safety expertise and claims he would bring added focus to safety, quality, and production if hired as the Safety Manager.
1. Joseph (Joe) F. Doherty
1413 Dove Drive, Virginia Beach, Virginia 23454
Cell: (757) 372-1984; Home: (757) 679-8008
Email: josephdoherty544@gmail.com
OBJECTIVE:
To serve in an employment position involving Occupational Safety, Health and/or Environmental Professional
and promote the forward progress of our Country and Company
EXPERIENCE:
Main Industries Inc. Occupational Safety, Health (Industrial Hygiene), and Environmental
Manager/Supervisor for 18 continuous years July 1997 – Jun 2015
Served as Occupational Safety, Health (Industrial Hygiene) and Environmental Manager, Corporate,
Overall Safety Programs Manager for Company; Supervisor: Mike Challoner, President/CEO
United States Navy Safety and Health Specialist / Instructor / Production Control Manager /Work Center
Supervisor/ Electrician Sept 1977-Jul 1996 Honorable Discharge
Served as ashore and afloat (International waters) Safety and Health Specialist, Instructor
Note: US Citizen, Registered Selective Service, eligible for federal employment, obtained Secret Security Clearance in US
Navy, willing to participate in probation period and direct pay program, normally work 50 hours (plus), Non-smoker
PREVIOUS DUTIES, RESPONSIBILITIES, QUALIFICATIONS & PROFESSIONAL:
Ensure Company compliance with all Occupational Safety, Health and Environmental applicable regulations,
consensus standards, and customer requirements.
Liaise and coordinate with Safety Organizations and Professionals
Responsible for Safety Programs for over 200 employees assigned, in a high employee turnover business.
Conceptualize, Develop, Implement and Monitor Programs, Principles, Practices, Procedures and Protocols
Responsible for Standard Operating Procedures, written work processes and Job Hazard Analysis (JHA’s) for
work under contract; Ensure adequate Risk Assessment and Hazard Analysis (RAHA); To include RCRA
Eight, TCLP; To include inspection discrepancies and employee disciplinary actions; mishap/incident
investigation; reporting and recordkeeping; inspections and audits; deficiency and hazard abatement;
unsafe/unhealthful reporting (I was the company 24 hour emergency contact person); training; hazardous
materials; occupational health; blood borne pathogens; respiratory protection; occupational; medical
surveillance; etc. Review/investigate industrial, construction and maritime site mishaps, accidents and near-
misses to identify contributing factors and root causes and to make, initiate and monitor recommendations to
initiate for effective corrective measures.
Advise management/executive (Company Officers) on compliance, programs, injuries/illnesses and training
COMPETANCIES, ABILITIES, SKILLS and KNOWLEDGE (Specialized Experience):
As Subject Matter Expert (SME) I have provided instruction, training and advice to many other professionals.
18 years Safety Manager (Corporate) AND 18.5 years of US Navy experience that included Safety Specialist
and CPR Instructor.
Comprehensive knowledge of Company, Customer, Government Agencies and OSHA
Authored the Company Safety and Environmental Program Manuals
Documented 21 OSHA-10 classes for 137 employees in 2 year period
Considered a Subject Matter Expert (SME) of IH&OSHE industrial hygiene, air monitoring for heavy metals
JOB SPECIFIC QUALIFICATIONS:
OCCUPATIONAL SAFETY, HEALTH, ENVIRONMENTAL MANAGER AND INDUSTRIAL HYGEINIST
I have Supervised performance of these tasks on multiple occasions; or I am normally the person who is
consulted by other workers, Supervisors, Project Managers, Production Managers; Company Officers; Other
2. Safety Joe Doherty 757-372-1984
Company Safety Personnel and/or Doctors & Risk Analysis Insurance Auditors to assist them in doing these
tasks because of my expertise: During frequent inspections and audits; Recommend corrective measures to
reduce hazardous environmental conditions; Recommend, Implement and Monitor compliance to; Implement
new health hazard safety process to ensure workers health and safety; Ensure Industrial Hygiene practices
comply with Company, Shipyard, Customer, State and Federal regulations; At the beginning of every new job;
Conduct design review of new proposed work to ensure adequate measures for prevention of occupational
injury; Conduct Industrial Hygiene surveys of working conditions to include hearing, heavy metals, etc., to
determine the nature of hazardous exposure in work area; Analyze Industrial Hygiene field data; to include
paint chip sampling on every space prior to work start to average approximately 100 per year; to identify work
related health hazards; Purchasing Authoritarian, Perform and Observe Industrial Hygiene sampling
equipment; to include establishing the calibration procedures, training employees and monitoring for proper
use and troubleshoot even by phone; for unusual parameters that may indicate malfunctions; Analyze
laboratory results; to include training others NOT to jump to conclusions until they were positive of the results;
to determine corrective actions needed; to include utilizing established programs required by OSHA that I
developed; Establish the program for physical screening; to include utilizing established programs required by
OSHA that I developed; of employees exposed to identified hazards; to ensure no overexposures ever
occurred; Collect samples to perform studies; to include paint chip sampling on every space prior to work start
to average approximately 100 per year; on potential environmental hazards; to ensure no overexposures ever
occurred; Maintain Industrial Hygiene records; to include hearing, Lead and Chromium IV; in accordance with
regulations and guidelines; OSHA 29 Code of Federal Regulations, Company, Customer and Shipyards
Procedures and Guidelines; Prepare comprehensive Industrial Hygiene written reports on findings; to include
requesting additional funds from the customer due to contractual agreements; Develop, Write, Implement,
Monitor to include personally Conduct training programs; to include multiple times per job due to high rotation
of workers; to promote the elimination of health hazards;
PRIOR DUTIES/ ACCOMPLISHMENTS:
Prepared supplements to regulations and manuals and developed specialized local requirements defining
mishap prevention, handling, and storage procedures based on interpretation and/or adaptation of higher
command instructions and policies formulated by other Federal government agencies including the DOL.
OSHA, DOD, NAVSEA, DOT, DMV and EPA.
Reviewed plans and specifications for new construction (NNS Double Eagle Program); major building
alterations (Main Industries new office building converted from DOT vehicle repair building); and/or changes in
installation equipment (new blast booth, new storage (including hazardous waste and storage); and monitored
projects through completion to ensure compliance with IH & OSHE codes and standards including OSHA and
Virginia Department of Environmental Quality (VA DEQ).
Developed and provided technical training/instruction to upper and mid management, supervisors, employees
and/or unit representatives. Example: Virginia Ship Repair Assn. 12th
Annual (8 hour, including IH) Safety
Seminar Chairperson, Performed training in group setting of up to just under 200 attendees at VSRA Safety &
Health Seminar as Chairperson for 8 hour training; Developed & performed training sessions for AMMA Safety
Specialists, Medical Staff, and Seminar on Respirator Protection, Fall Prevention and Heavy Metals;
Personally trained 4 Safety Inspectors that currently are employed by major contractors
I have personally been the Company Representative for the closing conference by an OSHA Industrial
Hygiene Compliance Officer
Employee training class creator, preparation and employee instructor / training / Certification;
Project Safety Specialist involving onsite training, project setup to include clean & dirty rooms/areas; shower &
locker room areas; work and home clothing;
SPECIALIZED EXPERIENCE/QUALIFICATIONS:
Qualified as QP-1 Environmental, Health & Safety Company (EH & S) Officer” in Accordance with “The Society
for Protective Coatings (SSPC)”
Author of the Corporate Safety & Health and Environmental Program Manuals
Program Manager for Company Programs including: Hazardous Materials; Personal Protective Equipment;
General Health and Safety; Occupational health and environmental controls; Fire Protection and Prevention;
Signs, Signals and Barricades; Materials handling, storage, use and disposal; Hand and Power Tools; Welding
and Cutting; Electrical (e.g. lighting, wiring, heating and cooling equipment, GFCI’s); Working near power lines,
3. Safety Joe Doherty 757-372-1984
third rails, other live power sources, etc.; Scaffolds; Fall protection; Toxic and hazardous substances; Cranes,
derricks, hoists, elevators and conveyers; Ladders; Airless spray injection; High and Ultra-High Pressure
Water-jetting; Abrasive blasting (wet & dry); Safe operating procedures for major equipment (e.g. dust
collectors, vacuum equipment, blast machines and components, waterjetting equipment and components;
Project-specific plans are in place for: - Confined space safety; - Erecting, moving and tearing down
containments and platforms; - Other project-specific conditions not addressed in the corporate safety program
Specialized experience for this position has included planning, implementing, and maintaining a IH&OSHE,
safety, health, environmental and occupational program to include radiation safety awareness program,
conducting surveys, inspections and assessments of office spaces, construction projects and all work areas
under contract, I have purchased, maintained, trained others, repaired, kept inventory of, calibration of 4 gas
meters, grade “D” breathing air filter boxes, industrial hygiene air pumps, photo-ionizing detectors, multi-meters
and electrical testers. I am experienced in making recommendations to prevent potential work hazards or
safety risks for a program; and providing advice and Guidance to employees and managers on safety program
issues.
MAJOR ACCOMPLISHMENTS:
Seven OSHA Inspections with ZERO Serious Discrepancies (Lyons (1), Detyens SC (3), VA (3)
No company fatalities over heavy metal exposures in eighteen year tour
Continuous Experience Modification Rate (EMR) of less than 1.0
ZERO lost time accidents during three of eighteen years
OSHA 10 and Company Orientation (2-4 hours) instructed almost all employees in a high turnover work
environment
Improved company safety culture through continuous reminders to all employees
Virginia Ship Repair Association Safety Committee Secretary for four years
Awarded three Navy Achievement medals for outstanding IH&OSHE performance
in three different commands (VF-74, AIMD PowerPlants,VF-14)
Earned Navy Enlistment Classification (NEC) for Safety Specialist and Instructor
EDUCATION-CERTIFICATIONS & QUALIFICATIONS:
SSPC Safety and Health Program Manager
Certified SSPC C-5 Supervisor/Competent Person Refresher Training for De-leading of
Industrial Structures (Heavy Metals Competent Person) Apr 2015
Certified SSPC C-3 Supervisor/Competent Person Training for De-leading of
Industrial Structures (Heavy Metals Competent Person) Nov 2013
Certified OSHA 5402 Course (Refresher Maritime OSHA 10 & 30 Hour Trainer) Jan 2011
Certified OSHA 5400 Course (Maritime OSHA 10 & 30 Hour Trainer) Jan 2011
Certified OSHA 5400 Course (Maritime OSHA 10 & 30 Hour Trainer) May 2007
Certified Shipyard Competent Person (SCP) for seventeen years 1997-2014
Industrial Hygiene tutored for many years on and off by a Certified Industrial Hygienist; Ms. Colleen
Becker of Marine Chemists Services, Inc. Hampton VA
Numerous IH & OSHE classes thru thirty-five years equaling over 40 college credits
Computer literate; Word, Excel, Drop-box Publisher, PowerPoint and others
OSHA Authorized Maritime Trainer expires May 21, 2019
CPR, AED and Basic First Aid expires Feb 27, 2016
COMMUNITY: Oct 2014-Present
Residents of Redwing Civic League Officer At Large; Duties include daily check-ins, assist other
officers including replacement when required, monthly meeting officer in charge of security and
discipline when necessary; requiring an hour a week.