Quantum data processing
•
5 likes•1,292 views
This document provides information about the required folders and file formats used in a data processing project that uses Quantum software. It describes folders for storing program files, data files, documentation, and output. It also summarizes the contents and purpose of key file types like the SET file, which contains table definitions, RUN file to execute the program, and BATCH file to define the processing steps. The document concludes with information on running the program via a DOS prompt by calling the BATCH file.
Report
Share
Report
Share
Recommended
Know the UNIX Commands
From these slides, you can get the basic commands of UNIX. These commands will make you comfortable with UNIX OS.
Modules and packages in python
The presentation is about the fundamentals of Modules and Packages as well as example code.
Pointers and Dynamic Memory Allocation
After referring these slides, it will be easier to understand pointer and dynamic memory allocation techniques.
Python : Functions
A function is a set of statements that take inputs, do some specific computation and produces output. The idea is to put some commonly or repeatedly done task together and make a function, so that instead of writing the same code again and again for different inputs, we can call the function.
Python provides built-in functions like print(), etc. but we can also create your own functions. These functions are called user-defined functions.
Recommended
Know the UNIX Commands
From these slides, you can get the basic commands of UNIX. These commands will make you comfortable with UNIX OS.
Modules and packages in python
The presentation is about the fundamentals of Modules and Packages as well as example code.
Pointers and Dynamic Memory Allocation
After referring these slides, it will be easier to understand pointer and dynamic memory allocation techniques.
Python : Functions
A function is a set of statements that take inputs, do some specific computation and produces output. The idea is to put some commonly or repeatedly done task together and make a function, so that instead of writing the same code again and again for different inputs, we can call the function.
Python provides built-in functions like print(), etc. but we can also create your own functions. These functions are called user-defined functions.
Python Variable Types, List, Tuple, Dictionary
METHODS DESCRIPTION
copy() They copy() method returns a shallow copy of the dictionary.
clear() The clear() method removes all items from the dictionary.
pop() Removes and returns an element from a dictionary having the given key.
popitem() Removes the arbitrary key-value pair from the dictionary and returns it as tuple.
get() It is a conventional method to access a value for a key.
dictionary_name.values() returns a list of all the values available in a given dictionary.
str() Produces a printable string representation of a dictionary.
update() Adds dictionary dict2’s key-values pairs to dict
setdefault() Set dict[key]=default if key is not already in dict
keys() Returns list of dictionary dict’s keys
items() Returns a list of dict’s (key, value) tuple pairs
has_key() Returns true if key in dictionary dict, false otherwise
fromkeys() Create a new dictionary with keys from seq and values set to value.
type() Returns the type of the passed variable.
cmp() Compares elements of both dict.
Advanced data structures vol. 1
the presentation would brief the online reader with the concepts of few advanced data structures like hash tables, tries, Binary Trees, Binary Search Trees, Threaded Binary Trees and AVL Trees.
Management file and directory in linux
In many ways, directories are treated like files. They can be created, deleted, moved and copied from Nautilus or from a shell prompt, using commands similar to those for files.
Creating Directories
You must have write permissions in a directory in order to create a new sub-directory. Most users have these permissions in their home directory (and its sub-directories) and the /tmp/ directory.
To create a new directory with Nautilus, navigate to the location of your new directory. Right-click in a blank portion of the window and select Create Folder. A new folder icon appears with the highlighted text untitled folder. Type a name for your folder and press [Enter].
To create a new directory using a shell prompt, use the command mkdir. Enter: mkdir <directory-name>, replacing <directory-name> with the intended title of the new directory.
Deleting Directories
To delete a directory from Nautilus, right click on it and choose Move to Trash, or click and drag the icon to the Trash on the Desktop.
To delete an empty directory from a shell prompt, enter the command rmdir. To delete a directory that may not be empty (and consequently everything inside that directory), enter the command rm -rf <directory>. Refer to Section 4.5.5 Delete files with rm for more information regarding the rm command.
Dot Directories
Applications create "dot" directories as well as dot files. Dot files are a single hidden configuration file — a dot directory is a hidden directory of configuration and other files required by the application. The non-configuration files in these directories are generally user-specific, and will be available only to the user who installed them.
Chapter 7 Run Time Environment
Compiler Running Environment and Back end Operation of Memory allocation
Introduction to package in java
A package allows a developer to group classes (and interfaces) together. These classes will all be related in some way – they might all have to do with a specific application or perform a specific set of tasks.
OOP Unit 2 - Classes and Object
Defining class
Defining member functions
Static data members
Static member functions
Private data members
Public member functions
Arrays of objects
Objects as a function arguments
Constructors and destructors
Types of constructors
Handling of multiple constructors, destructors.
Data Structure and Algorithms Binary Search Tree
This slide explains some basic concept about Binary Search Tree like searching, sorting and deletion
Managing input and output operation in c
All fundamental point of input and output operation basic to advance level in C programming are cover....
Advanced Python : Decorators
This slide gives quick introduction to function and class decorators in python with easy to understand examples.
CenTable - Requirements Specification CenTable is a system for creati.pdf
CenTable - Requirements Specification CenTable is a system for creating tabular reports from
county-level U.S.Census Data it is appropriate for batch processing (both off Ine and in support
of an on-line system). The inputs to the system are the ASCII county data fle (land associated
data dictionary) and an ASCI tle that describes the tabular report to be created. The output is a
table in either HTMI or AScll text format 1. Command-Line Parameters 1.1. The first command
line parameter must be the mame of the county level data file to use. 1.2 The second parameter
must be either-h (to indicate that the output should be in HTMor (to indicate that the output
should be in ASCl et) Location of \"Files\" .1. All census data fles must be in the same directory
as the executable 2.2 The report desoription fle must be read from standard in. 2· 3 Report
Description File 1. The format of the report deicription file has not been specified 32. Contents
of the Report Description File 3.2.1it must include a list of all of the counbies to include in the
report 22.It musz contain the field identifiers for the columns so inclade in the report [in ender.
3.23Jt mast contain #tte for each field in the report. 3.2.3.1 It must contain a format descriptor for
the title that idudt the horizonal positioning of the titie (left, center, or right) and the appropriane
way to handle ttles that are too long truncate, break word boundareia 324Jt must contain a format
descrigtor for each field in the report that includes the width of the field, the number of digts to
the right of the decimal place (for floating-point fields the padding character to use, and an
indication of whether or not the sign should always 12 5Jt must contain a specifier for each field
Chatt indicates what information (total, mean nothingl should be diplayed in the last now of the
output 1 42 Output must When the containing the required information 42.1. The tedt must be
displayed in a xed-width font 4.22. The output need not handle page breaks ie, the repert can
have an arbitrary mumber of be sent to standard out witch is used, the output must be an
appropriately formatted HTML table rows when the fiag t.ned, the output munt be an
approprately formatted ASCII tnt file ethat wil look coreect when displayed in a feed with fo
4.3.1 The output need not handle page breaks e, the report can have an arbibrary number of rows.
S1 The report desoription fle may be generated by an untrusted source. 52 Command-line
parameters may be provided by an untrusted source 5.3. CenTable must only be able to read 0m
the dinectory is installed in and standard in, Centable must only be able to write to standa out.
Solution
Okay So basically what you have to create a C Program for an application. This should be called
CenTable.
Input:
1. This system will take as input a text file which contains information about countries and their
census. It must be containing a lot of fields. You need to once take a look at the file to
unders.
More Related Content
What's hot
Python Variable Types, List, Tuple, Dictionary
METHODS DESCRIPTION
copy() They copy() method returns a shallow copy of the dictionary.
clear() The clear() method removes all items from the dictionary.
pop() Removes and returns an element from a dictionary having the given key.
popitem() Removes the arbitrary key-value pair from the dictionary and returns it as tuple.
get() It is a conventional method to access a value for a key.
dictionary_name.values() returns a list of all the values available in a given dictionary.
str() Produces a printable string representation of a dictionary.
update() Adds dictionary dict2’s key-values pairs to dict
setdefault() Set dict[key]=default if key is not already in dict
keys() Returns list of dictionary dict’s keys
items() Returns a list of dict’s (key, value) tuple pairs
has_key() Returns true if key in dictionary dict, false otherwise
fromkeys() Create a new dictionary with keys from seq and values set to value.
type() Returns the type of the passed variable.
cmp() Compares elements of both dict.
Advanced data structures vol. 1
the presentation would brief the online reader with the concepts of few advanced data structures like hash tables, tries, Binary Trees, Binary Search Trees, Threaded Binary Trees and AVL Trees.
Management file and directory in linux
In many ways, directories are treated like files. They can be created, deleted, moved and copied from Nautilus or from a shell prompt, using commands similar to those for files.
Creating Directories
You must have write permissions in a directory in order to create a new sub-directory. Most users have these permissions in their home directory (and its sub-directories) and the /tmp/ directory.
To create a new directory with Nautilus, navigate to the location of your new directory. Right-click in a blank portion of the window and select Create Folder. A new folder icon appears with the highlighted text untitled folder. Type a name for your folder and press [Enter].
To create a new directory using a shell prompt, use the command mkdir. Enter: mkdir <directory-name>, replacing <directory-name> with the intended title of the new directory.
Deleting Directories
To delete a directory from Nautilus, right click on it and choose Move to Trash, or click and drag the icon to the Trash on the Desktop.
To delete an empty directory from a shell prompt, enter the command rmdir. To delete a directory that may not be empty (and consequently everything inside that directory), enter the command rm -rf <directory>. Refer to Section 4.5.5 Delete files with rm for more information regarding the rm command.
Dot Directories
Applications create "dot" directories as well as dot files. Dot files are a single hidden configuration file — a dot directory is a hidden directory of configuration and other files required by the application. The non-configuration files in these directories are generally user-specific, and will be available only to the user who installed them.
Chapter 7 Run Time Environment
Compiler Running Environment and Back end Operation of Memory allocation
Introduction to package in java
A package allows a developer to group classes (and interfaces) together. These classes will all be related in some way – they might all have to do with a specific application or perform a specific set of tasks.
OOP Unit 2 - Classes and Object
Defining class
Defining member functions
Static data members
Static member functions
Private data members
Public member functions
Arrays of objects
Objects as a function arguments
Constructors and destructors
Types of constructors
Handling of multiple constructors, destructors.
Data Structure and Algorithms Binary Search Tree
This slide explains some basic concept about Binary Search Tree like searching, sorting and deletion
Managing input and output operation in c
All fundamental point of input and output operation basic to advance level in C programming are cover....
Advanced Python : Decorators
This slide gives quick introduction to function and class decorators in python with easy to understand examples.
What's hot (20)
Similar to Quantum data processing
CenTable - Requirements Specification CenTable is a system for creati.pdf
CenTable - Requirements Specification CenTable is a system for creating tabular reports from
county-level U.S.Census Data it is appropriate for batch processing (both off Ine and in support
of an on-line system). The inputs to the system are the ASCII county data fle (land associated
data dictionary) and an ASCI tle that describes the tabular report to be created. The output is a
table in either HTMI or AScll text format 1. Command-Line Parameters 1.1. The first command
line parameter must be the mame of the county level data file to use. 1.2 The second parameter
must be either-h (to indicate that the output should be in HTMor (to indicate that the output
should be in ASCl et) Location of \"Files\" .1. All census data fles must be in the same directory
as the executable 2.2 The report desoription fle must be read from standard in. 2· 3 Report
Description File 1. The format of the report deicription file has not been specified 32. Contents
of the Report Description File 3.2.1it must include a list of all of the counbies to include in the
report 22.It musz contain the field identifiers for the columns so inclade in the report [in ender.
3.23Jt mast contain #tte for each field in the report. 3.2.3.1 It must contain a format descriptor for
the title that idudt the horizonal positioning of the titie (left, center, or right) and the appropriane
way to handle ttles that are too long truncate, break word boundareia 324Jt must contain a format
descrigtor for each field in the report that includes the width of the field, the number of digts to
the right of the decimal place (for floating-point fields the padding character to use, and an
indication of whether or not the sign should always 12 5Jt must contain a specifier for each field
Chatt indicates what information (total, mean nothingl should be diplayed in the last now of the
output 1 42 Output must When the containing the required information 42.1. The tedt must be
displayed in a xed-width font 4.22. The output need not handle page breaks ie, the repert can
have an arbitrary mumber of be sent to standard out witch is used, the output must be an
appropriately formatted HTML table rows when the fiag t.ned, the output munt be an
approprately formatted ASCII tnt file ethat wil look coreect when displayed in a feed with fo
4.3.1 The output need not handle page breaks e, the report can have an arbibrary number of rows.
S1 The report desoription fle may be generated by an untrusted source. 52 Command-line
parameters may be provided by an untrusted source 5.3. CenTable must only be able to read 0m
the dinectory is installed in and standard in, Centable must only be able to write to standa out.
Solution
Okay So basically what you have to create a C Program for an application. This should be called
CenTable.
Input:
1. This system will take as input a text file which contains information about countries and their
census. It must be containing a lot of fields. You need to once take a look at the file to
unders.
Educational Objectives After successfully completing this assignmen.pdf
Educational Objectives: After successfully completing this assignment, the student should be
able to accomplish the following:
Use a loop structure to read user input of unknown size through std::cin and store it in an array.
Use conditional branching to selectively perform computational tasks.
Declare (prototype) and define (implement) functions.
Declare and define functions with arguments of various types, including pointers, references,
const pointers, and const references.
Call functions, making appropriate use of the function arguments and their types.
Make decisions as to appropriate function call parameter type, from among: value, reference,
const reference, pointer, and const pointer.
Create, edit, build and run multi-file projects using the Linux/Emacs/Make environment
announced in the course organizer.
Operational Objectives: Create a project that computes the mean and median of a sequence of
integers received via standard input.
Deliverables: Files: stats.h, stats.cpp, main.cpp, makefile, log.txt. Note that these files constitute
a self-contained project.
Assessment Rubric: The following will be used as a guide when assessing the assignment:
Please self-evaluate your work as part of the development process.
Background
Given a finite collection of n numbers:
The mean is the sum of the numbers divided by n, and
The median is the middle value (in case n is odd) or the average of the two middle values (in
case n is even).
Note that to find the median of a collection of data, it is convenient to first sort the data, that is,
put the data in increasing (or non-decreasing) order. Then the median is just the middle datum in
the sorted sequence (or the average of the two middle data, if there are an even number).
One of the more intuitive sort algorithms is called Insertion Sort, which operates on an array
a[0..n-1] of elements. The idea is to \"insert\" the value of a[i] into the sub-array a[0..i-1] at the
largest possible index that results in the expanded sub-array a[0..i] sorted. We insert at the
highest possible index in order not to place the value ahead of any previously inserted elements
with the same value. The subarray a[0..i-1] is assumed to be sorted at the beginning of each
insertion step. The base case consists of a one-element array a[0..0], which is always sorted.
Here is a \"pseudocode\" description of the algorithm:
The inner loop copies all elements in a[0..i-1] up one index until the correct place for t is found.
Then put t in that place.
Procedural Requirements:
Begin a log file named log.txt. This should be an ascii text file in cop3330/proj1 with the
following header:
This file should document all work done by date and time, including all testing and test results.
Create and work within a separate subdirectory cop3330/proj1. Review the COP 3330 rules
found in Introduction/Work Rules.
Copy all of the files from LIB/proj1. These should include:
In addition you should have the script submit.sh in either your .bin or your.
CS 23001 Computer Science II Data Structures & AbstractionPro.docx
CS 23001 Computer Science II: Data Structures & Abstraction
Project #4
Spring 2015
Objectives:
· Develop and use a Tree ADT (n-ary)
· Apply and use tree traversal algorithms
· Manipulate trees by inserting and deleting nodes
· Apply and use STL
Problem:
Build a program profiler. Construct a program to instrument C++ source code to support program profiling.
It is often important to determine how many times a function or statement is executed. This is useful not only for debugging but for determining what parts of a program may need to be optimized. This process is called profiling. That is, a execution profile presents how many times each part of a program is executed using a given set of input data (or for some run time scenario). To compute a profile, statements need to be added to the code that keep track of how many times a function or statement is executed. The process of adding these statements is called instrumenting the code.
To implement a profiler one must first parse the source code and generate an Abstract Syntax Tree (AST) of the code. Each node of the AST describes the syntactic category of the code stored within it (function, statement, while-statement, etc.). So at the top level is a syntactic category corresponding to a program, class, or function (such as in the case of a main). Under that are sub-trees that further detail the syntactic categories of each part of the code. Such things as declarations, parameter lists, while-statement, and expression statements will describe the various parts of the program.
After the AST is generated it can then be traversed and the appropriate syntactic structures can be found that need to be instrumented. Once a construct is found, say a function, new code can be inserted that keeps track of how many times that function is executed.
The most difficult part of constructing a profiler is correctly parsing the source code. Unfortunately, C++ is notoriously difficult to parse. So here we will use a parsing tool called src2srcml. This tool reads in C++ code and marks up the code with XML tags (e.g., block, if, while, condition, name, etc). That is, the output is an AST in XML. The XML representation is called srcML (source code markup language).
A number of srcML data files are provided for the project. However, you can use your own program as input. To run srcML on wasp or hornet you will first need to set a PATH variable so the command can be found. You need to execute the command:
export PATH=/local/opt/srcml/bin:$PATH
It is best if you insert this line into your .bash_profile file in your home directory on wasp/hornet.
Then to generate the srcML file for your own code use the following:
src2srcml main.cpp -o main.cpp.xml
Use the following for a list of all options:
src2srcml --help
More information about srcML can be found at www.srcML.org including a list of all the tag names (see Getting Started). You can also download srcML if you want it on your own machine.
Your .
CPP homework help
I am Bianca H. I am a C++ Homework Expert at cpphomeworkhelp.com. I hold a Masters in Programming from, the University of Nottingham, UK. I have been helping students with their homework for the past 7 years. I solve homework related to C++. Visit cpphomeworkhelp.com or email info@cpphomeworkhelp.com. You can also call on +1 678 648 4277 for any assistance with C++ Homework.
Introduction to Stata
This is a short introduction course to Stata statistical software version 9. The course still applies to later versions of Stata, too. The course duration was 9 hours. It has been given at the Faculty of Economics and Political Science, Cairo University.
QTP Automation Testing Tutorial 7
IT Professional Academy QTP Automation Tutorial
Data Table, Environment, Test parameters
The program reads data from two files, itemsList-0x.txt and .docx
The program reads data from two files,
itemsList-0x.txt
and
inventoryList-0x.txt
. File extensions on Linux may be arbitrary–i.e., these files could have been named with
.dat
as the extensions.
The first file,
itemsList-0x.txt
, lists all possible items. Each line represents one item in the form
id name
.
Example 1: Sample itemsList-0x.txt
0 Air 1 HP Potion 2 MP Potion 5 Iron Ore 3 Bow Tie 4 Dirt 6 Diamond Ore 7 Iron Ingot 8 Diamond 9 Diamond Block
The second file,
inventoryList-0x.txt
, lists each individual inventory–or storage chest–followed by a list of items.
Example 2: Sample inventoryList-0x.txt
# 5
- 1 10 - 2 5 - 3 2 # 6
- 4 3 - 5 27 - 6 44 - 7 55 - 8 1 - 9 4 - 4 3 # 2
- 2 5 - 9 4 - 8 1 - 5 2 - 10 5
Each line preceded by
#
denotes the start of a new inventory. Each line preceded by
-
denotes an item. The program creates a new inventory each time a
#
is encountered.
When a
-
is encountered, a stack of items, ItemStack, is created. The
ItemStack
is placed in the
Inventory
based on the following rules:
If the Inventory is empty, store the ItemStack, and
return true
.
If the Inventory is not empty, examine the Inventory.
If a matching ItemStack is found, merge the two ItemStacks and
return true
.
If no matching ItemStack is found, store the new ItemStack and
return true
.
If the Inventory is full,
return false
.
Through the magic of abstraction, this is not one function, but four (4) functions in total. Yes, it does seem unnecessary at first. However, each function does one thing and only one thing. This is an exercise in understanding the thought process behind abstraction, interfaces, and the
S
/
O
in
S.O.L.I.D
(with some C++ code) in a multi-ADT program.
Most of your time will be spent on understanding the abstractions (and interfaces) as opposed to spamming cobblestone blocks… I mean C++ code.
3.2 Output
The output consists of three reports written to standard output, one after the other.
A report listing items that were stored or discarded.
A report listing all valid items.
Finally, a detailed report is printed. listing data for each inventory:
Maximum Capacity–i.e., total slots.
Utilized Capacity–i.e., occupied slots
Listing of all items.
If the program is run with the provided input files, the following output should be generated…
Example 3: Sample Output
Processing Log: Stored (10) HP Potion Stored ( 5) MP Potion Stored ( 2) Bow Tie Stored ( 3) Dirt Stored (27) Iron Ore Stored (44) Diamond Ore Stored (55) Iron Ingot Stored ( 1) Diamond Stored ( 4) Diamond Block Stored ( 3) Dirt Stored ( 5) MP Potion Stored ( 4) Diamond Block Discarded ( 1) Diamond Discarded ( 2) Iron Ore Item List: 0 Air 1 HP Potion 2 MP Potion 3 Bow Tie 4 Dirt 5 Iron Ore 6 Diamond Ore 7 Iron Ingot 8 Diamond 9 Diamond Block Storage Summary: -Used 3 of 5 slots (10) HP Potion ( 5) MP Potion ( 2) Bow Tie -Used 6 of 6 slots ( 6) Dirt.
Reaction StatisticsBackgroundWhen collecting experimental data f.pdf
Reaction Statistics
Background
When collecting experimental data from chemical reactions, it’s often useful to generate
statistics based on the data. One experimental measure is the reaction rate in moles per second,
representing the amount of product formed per unit time. If we have a set of these reaction rates
collected in a data file, we can calculate summary statistical information, such as the minimum
and maximum values, the arithmetic mean, variance, and standard deviation.
Finding the minimum and maximum are straightforward: we scan through all the data, and keep
track of the smallest and largest values encountered. The arithmetic mean (or average) is defined
as:
m = (X1+X2+…+Xn)/n
where n is the number of reaction rates, and xi represents one experimental reaction rate. Once
you have the arithmetic mean, the variance can be calculated as the mean of the squares of the
deviations from the mean:
v= ((Xn-m)^2+(X2 – m^2) + …+(Xn-m)^2)/n
where n is the number of reaction rates, xi represents one experimental reaction rate, and m is the
arithmetic mean of the reaction rates. Once you have the variance, you can calculate the
standarddeviation as:
s = sqrt(v)
Assignment
You will develop a C program that reads data from an input text file containing chemical
reaction rates (in moles per second), and computes the minimum, maximum, arithmetic mean,
variance, and standard deviation for that set of data. Your instructor will provide input text files,
which will each contain a series of double values, each on a line of its own within the file. Your
program will read one of these input files into an array of doubles (i.e., it will populate the array
using the data values from the file). Your program will then calculate statistics using that array of
doubles, and will write the results out to a separate output text file.
The goals of this assignment are to provide you with experience reading and writing text data
files, provide you with experience passing an array into a function, and give you more
experience organizing your program into separate C functions.
When defining your C functions, you may either:
Define the functions before they are used by any other functions, OR
Place function prototypes near the top of your code (after all #include directives), and then define
the functions in any order.
Part 1 – Opening Files and Reading Data
Create a new Visual Studio Win32 Console project named reactionstats. Create a new C source
file named project4.c within that project. At the top of the source file, #define
_CRT_SECURE_NO_WARNINGS, and then include stdio.h, math.h, stdlib.h, stdbool.h, and
float.h.
Inside your main function, define the following:
A one-dimensional array of 600 doubles. They do not need to be initialized to anything at this
stage.
An integer variable to hold the number of elements in the array, initialized using the approach
demonstrated in class, using sizeof.
A FILE pointer variable, which will refer to the input data text file..
import java.io.BufferedReader;import java.io.BufferedWriter;.docx
import java.io.BufferedReader;
import java.io.BufferedWriter;
import java.io.FileReader;
import java.io.FileWriter;
import java.io.IOException;
import java.io.PrintWriter;
import java.util.StringTokenizer;
/**
* Read a .dat file and reverse it.
* CPS 350
*/
public class Reverse {
public static void main(String[]args) {
if (args.length != 3) {
System.err.println(" Incorrect number of arguments");
System.err.println(" Usage: ");
System.err.
println("\tjava Reverse <stack type> <input file> <output file>");
System.exit(1);
}
boolean useList = true;
if (args[0].compareTo("list")==0)
useList = true;
else if (args[0].compareTo("array")==0)
useList = false;
else {
System.err.println("\tSaw "+args[0]+" instead of list or array as first argument");
System.exit(1);
}
try {
//
// Set up the input file to read, and the output file to write to
//
BufferedReader fileIn =
new BufferedReader(new FileReader(args[1]));
PrintWriter fileOut =
new PrintWriter(new
BufferedWriter(new FileWriter(args[2])));
//
// Read the first line of the .dat file to get sample rate.
// We want to store the sample rate value in a variable,
// but we can ignore the "; Sample Rate" part of the line.
// Step through the first line one token (word) at a time
// using the StringTokenizer. The fourth token is the one
// we want (the sample rate).
//
StringTokenizer str;
String oneLine;
int sampleRate;
String strJunk;
oneLine = fileIn.readLine();
str = new StringTokenizer(oneLine);
strJunk = str.nextToken(); // Read in semicolon
strJunk = str.nextToken(); // Read in "Sample"
strJunk = str.nextToken(); // Read in "Rate"
// Read in sample rate
sampleRate = Integer.parseInt(str.nextToken());
//
// Read in the remainder of the file on line at a time.
// The values in the first column are thrown away.
// Place values from the second column on the stack.
// Stop reading if we reach the end of the file.
//
DStack s;
if (useList)
s = new ListStack();
else
s = new ArrayStack();
String timestep;
double data;
int count = 0;
while ((oneLine = fileIn.readLine()) != null) {
if (oneLine.charAt(0) == ';') {
continue;
}
str = new StringTokenizer(oneLine);
// Read in time step value from first col.
Std 10 Computer Chapter 5 Introduction to Calc
Std 10 Computer Chapter 5 Introduction to Calc by Nuzhat Memon
Calc
Spreadsheet
LibreOffice
Worksheet
Applications of spreadsheet packages
Getting started with Calc
Rows and columns and cells in spreadsheet
Title bar in Calc
Menu bar or pull down menu in Calc
Toolbar in Calc
Components of spreadsheet
ods file format
Practical Exercise : Sum, Product, Grand Total, Tax Calculation
starteamcalc (Displaying photograph of developer team)
Tool Development 08 - Windows Command Prompt
Chapter 08 of the lecture Tool Development taught at SAE Institute Hamburg.
Introduction to the windows command prompt, and command-line arguments and calling external programs in .NET.
What's new with Apache Spark's Structured Streaming?
Overview of the changes from Apache Spark streaming dstreams to structured streaming.
Article link httpiveybusinessjournal.compublicationmanaging-.docx
Article link: http://iveybusinessjournal.com/publication/managing-global-risk-to-seize-competitive-advantage/
Requirements: Write one summary and study note both no longer than one pages should include all point of article. Then do a PPT and write a presenting paper only for 5 minutes.
Groups of students will create and offer two MS PowerPoint presentation summarizing the main points of one of the readings for this course along with a one page handout for the students in the class. The aim of the presentations and the handouts is to provide the audience with the main ideas of the article and study notes. Groups will bring to class enough copies of the handout for each student in the class. The handout should list the name of the author, the title of the article, the title of the journal, and the publication date and page numbers along with a summary of its main points. Please do not exceed one page for this material.
import java.io.BufferedReader;
import java.io.BufferedWriter;
import java.io.FileReader;
import java.io.FileWriter;
import java.io.IOException;
import java.io.PrintWriter;
import java.util.StringTokenizer;
/**
* Read a .dat file and reverse it.
*/
public class Reverse {
public static void main(String[]args) {
if (args.length != 3) {
System.err.println(" Incorrect number of arguments");
System.err.println(" Usage: ");
System.err.
println("\tjava Reverse <stack type> <input file> <output file>");
System.exit(1);
}
boolean useList = true;
if (args[0].compareTo("list")==0)
useList = true;
else if (args[0].compareTo("array")==0)
useList = false;
else {
System.err.println("\tSaw "+args[0]+" instead of list or array as first argument");
System.exit(1);
}
try {
//
// Set up the input file to read, and the output file to write to
//
BufferedReader fileIn =
new BufferedReader(new FileReader(args[1]));
PrintWriter fileOut =
new PrintWriter(new
BufferedWriter(new FileWriter(args[2])));
//
// Read the first line of the .dat file to get sample rate.
// We want to store the sample rate value in a variable,
// but we can ignore the "; Sample Rate" part of the line.
// Step through the first line one token (word) at a time
// using the StringTokenizer. The fourth token is the one
// we want (the sample rate).
//
StringTokenizer str;
String oneLine;
int sampleRate;
String strJunk;
oneLine = fileIn.readLine();
str = new StringTokenizer(oneLine);
strJunk = str.nextToken(); // Read in semicolon
strJunk = str.nextToken(); // Read in "Sample"
strJunk = str.nextToken(); // Read in "Rate"
// ...
Similar to Quantum data processing (20)
CenTable - Requirements Specification CenTable is a system for creati.pdf
CenTable - Requirements Specification CenTable is a system for creati.pdf
Educational Objectives After successfully completing this assignmen.pdf
Educational Objectives After successfully completing this assignmen.pdf
CS 23001 Computer Science II Data Structures & AbstractionPro.docx
CS 23001 Computer Science II Data Structures & AbstractionPro.docx
The program reads data from two files, itemsList-0x.txt and .docx
The program reads data from two files, itemsList-0x.txt and .docx
Reaction StatisticsBackgroundWhen collecting experimental data f.pdf
Reaction StatisticsBackgroundWhen collecting experimental data f.pdf
import java.io.BufferedReader;import java.io.BufferedWriter;.docx
import java.io.BufferedReader;import java.io.BufferedWriter;.docx
What's new with Apache Spark's Structured Streaming?
What's new with Apache Spark's Structured Streaming?
Article link httpiveybusinessjournal.compublicationmanaging-.docx
Article link httpiveybusinessjournal.compublicationmanaging-.docx
Recently uploaded
Building Your Employer Brand with Social Media
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
Premium MEAN Stack Development Solutions for Modern Businesses
Stay ahead of the curve with our premium MEAN Stack Development Solutions. Our expert developers utilize MongoDB, Express.js, AngularJS, and Node.js to create modern and responsive web applications. Trust us for cutting-edge solutions that drive your business growth and success.
Know more: https://www.synapseindia.com/technology/mean-stack-development-company.html
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
CALL 8867766396 SATTA MATKA | DPBOSS | KALYAN MAIN BAZAR | FAST MATKA | DPBOSS GUESSING | TARA MATKA | KALYAN CHART | MATKA BOSS
-- June 2024 is National Volunteer Month --
Check out our June display of books on voluntary organisations
LA HUG - Video Testimonials with Chynna Morgan - June 2024
Have you ever heard that user-generated content or video testimonials can take your brand to the next level? We will explore how you can effectively use video testimonials to leverage and boost your sales, content strategy, and increase your CRM data.🤯
We will dig deeper into:
1. How to capture video testimonials that convert from your audience 🎥
2. How to leverage your testimonials to boost your sales 💲
3. How you can capture more CRM data to understand your audience better through video testimonials. 📊
一比一原版加拿大渥太华大学毕业证（uottawa毕业证书）如何办理
一模一样【q/微:1954292140】【加拿大渥太华大学毕业证（uottawa毕业证书）成绩单Offer】【q/微:1954292140】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【q/微:1954292140】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【q/微:1954292140】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Agency Managed Advisory Board As a Solution To Career Path Defining Business ...
Agency Managed Advisory Board
Discover the innovative and creative projects that highlight my journey throu...
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
Evgen Osmak: Methods of key project parameters estimation: from the shaman-in...
Evgen Osmak: Methods of key project parameters estimation: from the shaman-inspired to the data-driven praxis (UA)
Kyiv PMDay 2024 Summer
Website – www.pmday.org
Youtube – https://www.youtube.com/startuplviv
FB – https://www.facebook.com/pmdayconference
Buy Verified PayPal Account | Buy Google 5 Star Reviews
Buy Verified PayPal Account
Looking to buy verified PayPal accounts? Discover 7 expert tips for safely purchasing a verified PayPal account in 2024. Ensure security and reliability for your transactions.
PayPal Services Features-
🟢 Email Access
🟢 Bank Added
🟢 Card Verified
🟢 Full SSN Provided
🟢 Phone Number Access
🟢 Driving License Copy
🟢 Fasted Delivery
Client Satisfaction is Our First priority. Our services is very appropriate to buy. We assume that the first-rate way to purchase our offerings is to order on the website. If you have any worry in our cooperation usually You can order us on Skype or Telegram.
24/7 Hours Reply/Please Contact
usawebmarketEmail: support@usawebmarket.com
Skype: usawebmarket
Telegram: @usawebmarket
WhatsApp: +1(218) 203-5951
USA WEB MARKET is the Best Verified PayPal, Payoneer, Cash App, Skrill, Neteller, Stripe Account and SEO, SMM Service provider.100%Satisfection granted.100% replacement Granted.
Organizational Change Leadership Agile Tour Geneve 2024
Organizational Change Leadership at Agile Tour Geneve 2024
Search Disrupted Google’s Leaked Documents Rock the SEO World.pdf
The world of search engine optimization (SEO) is buzzing with discussions after Google confirmed that around 2,500 leaked internal documents related to its Search feature are indeed authentic. The revelation has sparked significant concerns within the SEO community. The leaked documents were initially reported by SEO experts Rand Fishkin and Mike King, igniting widespread analysis and discourse. For More Info:- https://news.arihantwebtech.com/search-disrupted-googles-leaked-documents-rock-the-seo-world/
Meas_Dylan_DMBS_PB1_2024-05XX_Revised.pdf
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
Kseniya Leshchenko: Shared development support service model as the way to ma...
Kseniya Leshchenko: Shared development support service model as the way to make small projects with small budgets profitable for the company (UA)
Kyiv PMDay 2024 Summer
Website – www.pmday.org
Youtube – https://www.youtube.com/startuplviv
FB – https://www.facebook.com/pmdayconference
Recently uploaded (20)
Premium MEAN Stack Development Solutions for Modern Businesses
Premium MEAN Stack Development Solutions for Modern Businesses
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
Bài tập - Tiếng anh 11 Global Success UNIT 1 - Bản HS.doc
Bài tập - Tiếng anh 11 Global Success UNIT 1 - Bản HS.doc
LA HUG - Video Testimonials with Chynna Morgan - June 2024
LA HUG - Video Testimonials with Chynna Morgan - June 2024
Agency Managed Advisory Board As a Solution To Career Path Defining Business ...
Agency Managed Advisory Board As a Solution To Career Path Defining Business ...
Discover the innovative and creative projects that highlight my journey throu...
Discover the innovative and creative projects that highlight my journey throu...
Evgen Osmak: Methods of key project parameters estimation: from the shaman-in...
Evgen Osmak: Methods of key project parameters estimation: from the shaman-in...
Buy Verified PayPal Account | Buy Google 5 Star Reviews
Buy Verified PayPal Account | Buy Google 5 Star Reviews
Organizational Change Leadership Agile Tour Geneve 2024
Organizational Change Leadership Agile Tour Geneve 2024
Search Disrupted Google’s Leaked Documents Rock the SEO World.pdf
Search Disrupted Google’s Leaked Documents Rock the SEO World.pdf
Bài tập - Tiếng anh 11 Global Success UNIT 1 - Bản HS.doc.pdf
Bài tập - Tiếng anh 11 Global Success UNIT 1 - Bản HS.doc.pdf
Kseniya Leshchenko: Shared development support service model as the way to ma...
Kseniya Leshchenko: Shared development support service model as the way to ma...
Quantum data processing
- 1. Data Processing with || Quantum || Textpad.lnk
- 2. Data File Formats: ASCII.dat Sample Data
- 3. Required Folders: Axes: To store programme files such as Axes, Tab , run & batch files Clean: To store validation programme file Data: To store data files (*.dat) Docs: To store all the information about project sent by client. It includes questionnaire, Scrutiny note, Check list. Xls and Analysis Plan, etc. Email: Important email store in this folder Flip: To store programme file to run flip for Quanvert Output: It contains the outputs files in *CSV format. Qin It contains sub files would included in main axes
- 4. Textpad.lnk SET File: It is a programming file. It contains the codes of tables which has to be print. It is able to open in Textpad. A set file has four sections: First Section: In this section there are declaration of number of records, type of data (card data or non-card data), edit-section, banner definitions, test to be applied with certain level of significance. Second section: Sub file (Qin): Every sub file belongs to each variables for which table is to be print. It includes options with their respective codes.ege. {i} q1.qin n11 n01Airtel ;ca00’1’ n01Idea ;ca00’2’ n01BSNL ;ca00’3’
- 5. Third Section: Axis File: It contains the Table Title, Total base i.e. number of response in the table and column number from where to carry the data. l q1 *include ttitle.qin;ttl=Q1.MOUB Brand n10All Respondents *include q1.qin;col(a)=10 Fourth Section: Tab file: In this section we declare tables which are to be print. tab q1 &top
- 7. R.bat Batch File: It is an one of the important file where we define the files to generate through Quantum i.e. set file, run file, tab file, edit file and axes file, these files are required in process and path of data and output file. A sample of r.bat file contains call quantum DQ45200.RUN data.dat call qout -p akp call q2cda -h akp ..outputALL.csv call quclean -a –n
- 8. MS-DOS Prompt.pif Program is run in DOS mode by simply giving the path of r.bat file
- 9. Output We see the output tables in All.CSV file
- 10. Demo
- 11. Ashok Kumar Patra Abacus Analytics-Delhi ashok.patra@imrbint.com