This document provides information about quality management system templates, including templates, tools, and strategies. It discusses specific templates for policies, procedures, work instructions, and other documents needed for a quality management system. The templates are designed to help users build a quality management system quickly that complies with standards like ISO and FDA guidelines. The templates come with over 40 pre-written standard operating procedures and other documents, as well as support from regulatory compliance experts. Specific quality management tools like check sheets, control charts, Pareto charts, scatter plots, Ishikawa diagrams, and histograms are also discussed.

1. Quality management system template
In this file, you can ref useful information about quality management system template such as
quality management system templateforms, tools for quality management system template,
quality management system templatestrategies … If you need more assistant for quality
management system template, please leave your comment at the end of file.
Other useful material for quality management systemtemplate:
• qualitymanagement123.com/23-free-ebooks-for-quality-management
• qualitymanagement123.com/185-free-quality-management-forms
• qualitymanagement123.com/free-98-ISO-9001-templates-and-forms
• qualitymanagement123.com/top-84-quality-management-KPIs
• qualitymanagement123.com/top-18-quality-management-job-descriptions
• qualitymanagement123.com/86-quality-management-interview-questions-and-answers
I. Contents of quality management system template
==================
Built in Microsoft® Word for easy editing, these templates are the quick and easy way to build a
Quality Management System (QMS) for ISO, GMP or other regulatory compliance.
The templates are used by our consultants in the field and are full of practical guidance and how-
to instructions. They are easy to use and will save you weeks, if not months, of time.
Ideal for startup pharmaceutical or life science companies who must comply with TGA or FDA
GMP guidelines.
Whats been updated (Dec 2014)
We have updated our template packs with many improvements including:
 compliance with PIC/S Guide to Good Manufacturing Practice for Medicinal Products, PE
009-11 March 2014
 compliance with ICH Pharmaceutical Quality System Q10
 Microsoft Word and Excel 2013 formats
 included master templates for “foundation” QMS documents (eg, policies, procedures, work
instructions, specifications, etc.)
 higher focus on quality risk management throughout the templates
 improved consistency of formatting and terminology throughout all templates

2. What's included in the QMS template pack?
Pack includes quality management system templates for developing Policies, Standard Operating
Procedures (SOPs) and Work Instructions for the following areas of your business:
 product information, quotations and orders
 product development
 production and quality planning
 purchasing and receiving
 production
 labelling, packaging, shipping and distribution
 monitoring and measurement of products
 monitoring and measurement of the Quality Management System
 monitoring customer feedback and satisfaction management policies, planning and
commitments
 management review
 human resources
 plant, facility and equipment
 information resources
 measuring and monitoring devices
 continual improvement
 validation
 risk management
 CAPA
These areas are specified as being essential components of a pharmaceutical quality management
system by the various regulatory bodies e.g. TGA, FDA.
Get a head start with 40 pre-written standard operating procedures
The ideal resource for a quick and easy do-it-yourself QMS implementation, the template pack
includes 40 procedure templates (refer to the list on page 3 of the extract above), 19 form
templates, 1 manual, 12 master templates & 1 register.
Get help from our regulatory compliance experts
Included in the price is two hours of support via telephone or email. Feel confident in the
knowledge that if you have questions or get stuck then you can speak to a GMP compliance
specialist to set you on the right path.
Our consultants have many years of experience working in the pharma and medical device
industries. You can benefit from their knowledge of what works and what doesn't when creating
and maintaining a pharmaceutical quality management system.

3. Free Change Control Standard Operating Procedure
Download a free SOP covering change control for pharmaceutical manufacturing. It's included in
the template pack but you can download and try it out for free now.
==================
III. Quality management tools
1. Check sheet
The check sheet is a form (document) used to collect data
in real time at the location where the data is generated.
The data it captures can be quantitative or qualitative.
When the information is quantitative, the check sheet is
sometimes called a tally sheet.
The defining characteristic of a check sheet is that data
are recorded by making marks ("checks") on it. A typical
check sheet is divided into regions, and marks made in
different regions have different significance. Data are
read by observing the location and number of marks on
the sheet.
Check sheets typically employ a heading that answers the
Five Ws:
 Who filled out the check sheet
 What was collected (what each check represents,
an identifying batch or lot number)
 Where the collection took place (facility, room,
apparatus)
 When the collection took place (hour, shift, day
of the week)
 Why the data were collected
2. Control chart

4. Control charts, also known as Shewhart charts
(after Walter A. Shewhart) or process-behavior
charts, in statistical process control are tools used
to determine if a manufacturing or business
process is in a state of statistical control.
If analysis of the control chart indicates that the
process is currently under control (i.e., is stable,
with variation only coming from sources common
to the process), then no corrections or changes to
process control parameters are needed or desired.
In addition, data from the process can be used to
predict the future performance of the process. If
the chart indicates that the monitored process is
not in control, analysis of the chart can help
determine the sources of variation, as this will
result in degraded process performance.[1] A
process that is stable but operating outside of
desired (specification) limits (e.g., scrap rates
may be in statistical control but above desired
limits) needs to be improved through a deliberate
effort to understand the causes of current
performance and fundamentally improve the
process.
The control chart is one of the seven basic tools of
quality control.[3] Typically control charts are
used for time-series data, though they can be used
for data that have logical comparability (i.e. you
want to compare samples that were taken all at
the same time, or the performance of different
individuals), however the type of chart used to do
this requires consideration.
3. Pareto chart

5. A Pareto chart, named after Vilfredo Pareto, is a type
of chart that contains both bars and a line graph, where
individual values are represented in descending order
by bars, and the cumulative total is represented by the
line.
The left vertical axis is the frequency of occurrence,
but it can alternatively represent cost or another
important unit of measure. The right vertical axis is
the cumulative percentage of the total number of
occurrences, total cost, or total of the particular unit of
measure. Because the reasons are in decreasing order,
the cumulative function is a concave function. To take
the example above, in order to lower the amount of
late arrivals by 78%, it is sufficient to solve the first
three issues.
The purpose of the Pareto chart is to highlight the
most important among a (typically large) set of
factors. In quality control, it often represents the most
common sources of defects, the highest occurring type
of defect, or the most frequent reasons for customer
complaints, and so on. Wilkinson (2006) devised an
algorithm for producing statistically based acceptance
limits (similar to confidence intervals) for each bar in
the Pareto chart.
4. Scatter plot Method
A scatter plot, scatterplot, or scattergraph is a type of
mathematical diagram using Cartesian coordinates to
display values for two variables for a set of data.
The data is displayed as a collection of points, each
having the value of one variable determining the position
on the horizontal axis and the value of the other variable
determining the position on the vertical axis.[2] This kind
of plot is also called a scatter chart, scattergram, scatter
diagram,[3] or scatter graph.
A scatter plot is used when a variable exists that is under
the control of the experimenter. If a parameter exists that

6. is systematically incremented and/or decremented by the
other, it is called the control parameter or independent
variable and is customarily plotted along the horizontal
axis. The measured or dependent variable is customarily
plotted along the vertical axis. If no dependent variable
exists, either type of variable can be plotted on either axis
and a scatter plot will illustrate only the degree of
correlation (not causation) between two variables.
A scatter plot can suggest various kinds of correlations
between variables with a certain confidence interval. For
example, weight and height, weight would be on x axis
and height would be on the y axis. Correlations may be
positive (rising), negative (falling), or null (uncorrelated).
If the pattern of dots slopes from lower left to upper right,
it suggests a positive correlation between the variables
being studied. If the pattern of dots slopes from upper left
to lower right, it suggests a negative correlation. A line of
best fit (alternatively called 'trendline') can be drawn in
order to study the correlation between the variables. An
equation for the correlation between the variables can be
determined by established best-fit procedures. For a linear
correlation, the best-fit procedure is known as linear
regression and is guaranteed to generate a correct solution
in a finite time. No universal best-fit procedure is
guaranteed to generate a correct solution for arbitrary
relationships. A scatter plot is also very useful when we
wish to see how two comparable data sets agree with each
other. In this case, an identity line, i.e., a y=x line, or an
1:1 line, is often drawn as a reference. The more the two
data sets agree, the more the scatters tend to concentrate in
the vicinity of the identity line; if the two data sets are
numerically identical, the scatters fall on the identity line
exactly.

7. 5.Ishikawa diagram
Ishikawa diagrams (also called fishbone diagrams,
herringbone diagrams, cause-and-effect diagrams, or
Fishikawa) are causal diagrams created by Kaoru
Ishikawa (1968) that show the causes of a specific
event.[1][2] Common uses of the Ishikawa diagram are
product design and quality defect prevention, to identify
potential factors causing an overall effect. Each cause or
reason for imperfection is a source of variation. Causes
are usually grouped into major categories to identify these
sources of variation. The categories typically include
 People: Anyone involved with the process
 Methods: How the process is performed and the
specific requirements for doing it, such as policies,
procedures, rules, regulations and laws
 Machines: Any equipment, computers, tools, etc.
required to accomplish the job
 Materials: Raw materials, parts, pens, paper, etc.
used to produce the final product
 Measurements: Data generated from the process
that are used to evaluate its quality
 Environment: The conditions, such as location,
time, temperature, and culture in which the process
operates
6. Histogram method

8. A histogram is a graphical representation of the
distribution of data. It is an estimate of the probability
distribution of a continuous variable (quantitative
variable) and was first introduced by Karl Pearson.[1] To
construct a histogram, the first step is to "bin" the range of
values -- that is, divide the entire range of values into a
series of small intervals -- and then count how many
values fall into each interval. A rectangle is drawn with
height proportional to the count and width equal to the bin
size, so that rectangles abut each other. A histogram may
also be normalized displaying relative frequencies. It then
shows the proportion of cases that fall into each of several
categories, with the sum of the heights equaling 1. The
bins are usually specified as consecutive, non-overlapping
intervals of a variable. The bins (intervals) must be
adjacent, and usually equal size.[2] The rectangles of a
histogram are drawn so that they touch each other to
indicate that the original variable is continuous.[3]
III. Other topics related to Quality management system template (pdf
download)
quality management systems
quality management courses
quality management tools
iso 9001 quality management system
quality management process
quality management system example
quality system management
quality management techniques
quality management standards
quality management policy
quality management strategy
quality management books