This document contains a summary of Mirza Azmatullah Baig's qualifications and experience as a mechanical engineer. He has over 4 years of experience working on piping projects in Saudi Arabia for companies like Arabian Technocrats and Nasser S. Al Hajri Corporation. His responsibilities have included inspecting piping installations, performing hydrotesting, reviewing engineering documents, and ensuring work is completed according to client specifications. He holds qualifications in mechanical engineering, welding inspection, and piping design and seeks to contribute his skills to support an organization's objectives.

1. MIRZA AZMATULLAH BAIG
Mechanical Engineer
Arabian Technocrats Company
1
Mobile: 00966-533178084.
Email : baig0802@gmail.com.
PROFESSIONAL OBJECTIVE:
 To be associated with a progressive organization which can provide me with a dynamic work
sphere to extract my inherent skills as a Professional. Use and develop my aptitude to further
the organization’s objectives and also attain my career targets in the progress.
AACCAADDEEMMIICC QQUUAALLIIFFIICCAATTIIOONN::
Bachelor of Engineering (Mechanical)
Osmania University, 2011.
Board of Intermediate Education
Intermediate Public Examination (M.P.C), 2007.
Board of Secondary Education A.P
Secondary School Certificate, 2005.
TTEECCHHNNIICCAALL QQUUAALLIIFFIICCAATTIIOONN::
CSWIP 3.1 Certified Welding Inspector, CSWIP Cert no: 96510
ASNT Level II (American Society for Non Destructive Testing)
 Liquid Penetrant Testing (LPT)
 Magnetic Particle Testing (MPT)
 Radiograpy Testing (RT)
 Ultrasound Testing (UT)
Post Graduate Diploma in Process Piping Design & Engineering (IPEBS, Hyderabad)
Quality Control and Engineering Inspection (Advance Training Institute, Govt. of India)
AutoCAD (MSME, Govt. of India)

2. MIRZA AZMATULLAH BAIG
Mechanical Engineer
Arabian Technocrats Company
2
PPRROOJJEECCTT DDEESSCCRRIIPPTTIIOONN::
Company : Arabian Technocrats Company
Project : Replace HVAC Systems at Yanbu NGL , KSA
Client : Saudi Aramco Oil Company
Duration : Feb 2014 to till date
Position : Mechanical QC Inspector (Approved)
Company : Tawfiq Ahmed Al Muqahwi Est.
Project : Replacement of LPPT D2 @ GOSP-4, Uthmania, KSA
Client : Saudi Aramco Oil Company
Duration : June 2013 to Dec 2013
Position : Piping QC Inspector
Company : Nasser S. Al Hajri Corporation (NSH)
Project : SATORP Package-1, Jubail KSA
Client : Saudi Aramco Total Refining & Petrochemical Company
Duration : July 2012 to March 2013
Position : Piping QC Inspector (Approved)
Company : EBENEZER CONSTRUCTION
Duration : June 2011 to April 2012
Position : Piping Supervisor
DDUUTTIIEESS && RREESSPPOONNSSIIBBIILLIITTIIEESS
Company : Arabian Technocrats Company
Project : Replace HVAC Systems at Yanbu NGL , KSA
Client : Saudi Aramco Oil Company
 Prepare Mechanical Work Procedures like Gasket Installation and Bolt Tightning, Hydro testing
of Pipe and Valves etc as per Saudi Aramco Standards and Specifications.
 Prepare Hydro test and Tie-In Packages.
 Inspection of Pipe, Fittings and Piping Components as per MTO, BOM, MTA and related
Documents.
 Verify dimensional accuracy, alignment, plumbness etc of piping connections, fit-up etc.
 Monitoring Fabrication Activities at Fabrication Shop and Site.
 Monitor and inspects Pipe Fittings, O lets, nuts and stud bolts as per BOM (bill of materials) and
correct size and type, and all the pipe and pipe supports installed according to the approved
drawing and specification.
 Visual inspection of flanges, gaskets, and bolts, prior to installation.
 Bolt Torquing done as per Approved Procedure and Proper Torquing Value
 Inspection of valve, type of valves, direction of valve installed, valve handles orientation, valve
tag number, flange rating & size, vales operation and maintenance access.

3. MIRZA AZMATULLAH BAIG
Mechanical Engineer
Arabian Technocrats Company
3
 Perform Hydro testing of Valves (Body and Seat Test)
 Perform inspection and test activities including supervision monitoring of entire activities a site
and prepare reports.
 Visual inspection of welds, prior to release for hydro testing.
 Line check prior to hydro test, to verify the entire work in the test limits has been completed as
per isometric and project quality control procedures /specifications /standards.
 Prepare punch items during Line Check
 Coordinating with Construction Team for Clearing Punch Items, to release for hydro testing.
 Review hydro test package to ensure that the NDT summary, weld summary, weld map, support
drawing, valve list, approved drawing duly marked the test limits, P &Id marked with test
boundaries, check list, and all the related documents are attached in the test package as per the
project requirements.
 Preparing Red Line/ As Built Drawing.
 Perform Hydro testing of Piping as per Saudi Aramco Approved Procedure.
 Final Inspection of Piping System with the Client to check the Completeness.
 Issuing NCR for Standard Violation at Different Stages of Projects (Material receiving and
Installation)
 Involve in pre commissioning activities and monitor punch list.
Company : Tawfiq Ahmed Al Muqahwi Est.
Project : Replacement of LPPT D2 @ GOSP-4, Uthmania, KSA
Client : Saudi Aramco Oil Company
 Inspection of pipe line, spools as per isometric drawings.
 Verify and inspects the Piping material and Fittings as per specification and bill of materials.
 Verify alignment of piping connections, fit-up etc
 Line check prior to hydro test, to verify the entire work in the test limits has been completed as
per isometric and project quality control procedures /specifications /standards.
 Monitor and ensures that all welding activities are carried out according to the approved
procedures and compliance to welding codes.
 Prepare punch items, prior to release for hydro testing according to the punch list category.
 Review hydro test package to ensure that the NDT summary, weld summary, weld map, support
drawing, valve list, approved drawing duly marked the test limits, P &Id marked with test
boundaries, check list, and all the related documents are attached in the test package as per the
project requirements.
 Perform Hydro testing of Piping as per Saudi Aramco Approved Procedure.
 Final Inspection of the Piping after Installation.

4. MIRZA AZMATULLAH BAIG
Mechanical Engineer
Arabian Technocrats Company
4
Company : Nasser S. Al Hajri Corporation (NSH)
Project : SATORP Package-1, Jubail KSA
Client : Saudi Aramco Total Refining & Petrochemical Company (SATORP)
 Inspection of Pipe, Fittings and Piping Components as per MTO, BOM, MTA and related
Documents.
 Verify dimensional accuracy, alignment, plumbness etc of piping connections, fit-up etc.
 Monitor and inspects Pipe Fittings, O lets, nuts and stud bolts as per BOM (bill of materials) and
correct size and type, and all the pipe and pipe supports installed according to the approved
drawing and specification.
 Visual inspection of flanges, gaskets, and bolts, prior to installation.
 Bolt Torquing done as per Approved Procedure and Proper Torquing Value
 Inspection of valve, type of valves, direction of valve installed, valve handles orientation, valve
tag number, flange rating & size, vales operation and maintenance access.
 Visual inspection of welds, prior to release for hydro testing.
 Line check prior to hydro test, to verify the entire work in the test limits has been completed as
per isometric and project quality control procedures /specifications /standards.
 Prepare punch items during Line Check
 Coordinating with Construction Team for Clearing Punch Items, to release for hydro testing.
 Review hydro test package to ensure that the NDT summary, weld summary, weld map, support
drawing, valve list, approved drawing duly marked the test limits, P &Id marked with test
boundaries, check list, and all the related documents are attached in the test package as per the
project requirements.
 Perform Hydro testing of Piping as per SATORP Approved Procedure.
Company : EBENEZER CONSTRUCTION
Duration : June 2011 to April 2012
Position : Piping Supervisor
 Verify the Piping material and Fittings as per specification and bill of materials.
 Verify the Dimensions, alignment of piping connections done as per Approved drawings.
 Verify the Fit-up assembly done with proper gaping as per WPS
 Monitor and ensures that all welding activities are carried out according to the approved
procedures and Coordinate with Welding QC Inspector.
 Monitor the preparation for Pressure testing of Piping
 Coordinate with QC Inspector at all stages of Fabrication, Testing and Installation

5. MIRZA AZMATULLAH BAIG
Mechanical Engineer
Arabian Technocrats Company
5
SSTTRREENNGGTTHHSS::
 Highly motivated and goal-oriented Mechanical professional with experience 4 Years.
 Proven skills of working independently or as a team member to enhance efficiency.
 Comprehensive problem solving abilities.
 Good verbal and written communication skills.
 Ability to deal with people diplomatically.
 Willingness to learn, team facilitator and hard worker.
 Can meet the deadlines affectively and with ease.
 Punctual and Disciplined
PPEERRSSOONNAALL DDEETTAAIILLSS ::
Date of Birth : 16-08-1988
Nationality : Indian
Marital status : Single
Languages : English, Urdu, Hindi and Basic Arabic
Iqama : 2323445649
Driving License : Available (Indian, Saudi)
Passport No : K1824886
I hereby state that the above, given details are true and correct with my best of knowledge.
Place: Yanbu, KSA
Date : August, 2015