The document describes the Power Systems Experience Center (PSEC), a full-scale laboratory and demonstration facility operated by Eaton Corporation near Pittsburgh. At PSEC, visitors can observe product testing, participate in live demonstrations of various power technologies, and learn about advances in electrical power quality and energy management from Eaton experts. The facility consists of eight areas that simulate different operating environments, including commercial, industrial, residential, and data center power systems, as well as green technologies like solar panels and electric vehicle charging stations. Over 3,000 visitors per year from various industries attend PSEC to see new technologies, consult with experts, and evaluate electrical equipment.
Photovoltaic Training - Session 4 - Plant MaintenanceLeonardo ENERGY
Importance of good maintenance procedure in the plant operation.
•
Components to be maintained.
o
PV Panel.
o
Inverter.
o
Transformer.
o
Solar tracker.
o
Cabinet.
•
Types of maintenance
o
Corrective maintenance.
o
Preventive Maintenance.
•
Supplies.
o
Critical elements.
o
Guarantees.
•
Management of spare parts and stock.
•
Types of inspections and reach
o
Visual inspections.
o
Deep inspections.
o
Frequency of revisions.
Photovoltaic Training - Session 3 - Plant OperationLeonardo ENERGY
Control systems and telecommunications.
Components and infrastructure needed to control systems
Monitoring and troubleshooting
Management of information obtained by the control system
Management and alarms.
Sending information for maintenance purposes.
Security of the Installation.
Fundamental characteristics required in a surveillance system.
Protection systems against theft.
Anti‐intrusion systems.
CCTV and video surveillance.
e‐Rounds.
Remote control systems.
Security in PV roofs.
PV System Basics
Introduction to relevant Codes and Standards
Permit and Field Inspector Guidelines for PV Systems
Summary of Changes in 2005/2008 National Electrical Code
Photovoltaic Training - Session 4 - Plant MaintenanceLeonardo ENERGY
Importance of good maintenance procedure in the plant operation.
•
Components to be maintained.
o
PV Panel.
o
Inverter.
o
Transformer.
o
Solar tracker.
o
Cabinet.
•
Types of maintenance
o
Corrective maintenance.
o
Preventive Maintenance.
•
Supplies.
o
Critical elements.
o
Guarantees.
•
Management of spare parts and stock.
•
Types of inspections and reach
o
Visual inspections.
o
Deep inspections.
o
Frequency of revisions.
Photovoltaic Training - Session 3 - Plant OperationLeonardo ENERGY
Control systems and telecommunications.
Components and infrastructure needed to control systems
Monitoring and troubleshooting
Management of information obtained by the control system
Management and alarms.
Sending information for maintenance purposes.
Security of the Installation.
Fundamental characteristics required in a surveillance system.
Protection systems against theft.
Anti‐intrusion systems.
CCTV and video surveillance.
e‐Rounds.
Remote control systems.
Security in PV roofs.
PV System Basics
Introduction to relevant Codes and Standards
Permit and Field Inspector Guidelines for PV Systems
Summary of Changes in 2005/2008 National Electrical Code
Electricity is the lifeline for any building or business. Electrical power distribution system within a building or facility serves as the central nervous system of a body. Find out, how Current Solutions PC can help you with an efficient safer, and more productive electrical system design. What you electrical engineers need to know about power distribution and more. Slide now to find out the Current Solutions PC difference.
Energy Management and the Evolution of Intelligent Motor Control and Drives @...ARC Advisory Group
Energy Management and the Evolution of Intelligent Motor Control and Drives @ ARC's 2011 Industry Forum by Craig Resnick.
Intelligent motor control & drives once provided a safe, flexible & centralized means to control & protect motors
•Today, these devices have evolved to ‘smart’ energy managers that bring advances ranging from complex drive systems to basic control of fan or pump motors
•In high demand where uptime & equipment reliability are critical, in applications where even a short period of downtime can prove extremely costly & damaging
•These devices perform critical protective & troubleshooting functions & detailed diagnostics to help improve productivity & minimize downtime
This report aims to familiarize the reader with basic but important information about
two specific types of controllers – DC drives and AC drives. The first part provides
descriptions of the general working principles of variable speed drive (VSD)
technology. It discusses their main advantages and disadvantages between AC and
DC drive solutions. The second part explains some problems that could possibly be
encountered when employing AC or DC drive systems and offers practical
recommendations about how to approach these problems.
Dr Adrian West, Optima’s technical director, has spent more than 30 years working
with, programming and troubleshooting drive systems. This report is based on his
extensive practical knowledge and experience. It is, therefore, a very accurate and independent source of information.
Solar PV Power Project India and International Companies Kindly go through Important and Helpful Topic.
Solar PV Power Generation is Preference Now Days by any Country for Investment in Power Generation it's Economical and Silent Green Carbon Free Power Generation System.
Installation of Solar PV Panel is Possible Pole Mounted ,Roof Top Mounted Residential and Industrial , Ground Mounted ,Canal TOP also Water Floating .
Many Solar PV Power Developers is Accepting Very Low Tariff and due to this EPC Companies ,Solar PV Panels, Invertors and Balance Of Plants Equipment's Supply ,Design ,Engineering and Installation have to work with very Low Margin.
The Maintenance of These Plant Costing is Total Depend Selection Of Component Quality ,Design ,Engineering and Professional Approach for Installation otherwise Developer will lose Revenue because of Failure or Low Generation this incurred high cost for Maintenance.
Earthing Design for Total Plant AC and DC Array , Lightning Protection (Threat Cloud Charge Strike) and Installation of Surge Protection with DC Cable and MC4 Connectors are ignorance part in projects Later Face big Problem many time lead Fire Accidents.
Selection OF Solar PV Panels Structure and Design also very important many failure showing Selection Structure Quality and Poor Installation .
Another Challenge is Cleaning of PV Panels and Monitoring of Large Installed Solar PV Panels now days recommendation Robotics Dry Cleaning of PV Panels and Inspection through DRONE .
Solar PV Plant Size is very Large and maintained by less Staff very Difficult to Control Tree Passing and Steel /Damage by un Identify Person so Industries recommend to do Installation CCTV with Day Nigh Monitoring , Fencing of Plant (PIDS), Security System added Fire Alarm and Access Controls Systems.
Networking of Solar PV Power Plant using Fiber Optics and Wireless Infra and Extending Data ,Monitoring of plant Local and Central Level .
Link Vue System Experience to Offer Design ,Engineering ,Selection of Genuine and Right Components, Supply Support for Installation and AMC if customer require .
Electrical Safety Maintenance Free Earthing , ESE Type Lightning Protection ,Surge Protection ,Industrial Out Door Plug Sockets.
LED Street Light , CCTV Camera, Fire Alarm ,Access Controls, Security Systems, PIDS .
High Energy Battery Storage Systems
MC4 Connectors with and Without Fuse ,DC Fuse 1500V-1800 V, Current 30 Amps.
Plz go through and give feedback ,Inquiry , time for Web Presentation.
useful for Solar PV Power Plant Developer, EPC and Electrical Contractors.
MNRE /SECI/NTPC/NHPC/State Renewable Departments/Smart City/Ministry of Power/REC Ltd/BHEL/CEL/REIL/RECML
Private Solar Power Leading EPC Companies.
Visit our Website www.linkvuesystem.com
Call M-9811247237 Mahesh Chandra Manav
manav.chandra@linkvuesystem.com
Intelligence, Communicate Controls and Monitors your Building Gadgets as you want with use Smart and Efficient Devices which all can connect through Physical Cables for Power, Signal and Data Cables .
Worldwide many leading protocol Data Loggers and I/0's Digital and Analogue Field Products.
BACANET, MODBUS-TCIP ,MODBUS RTU and IEC61850 are most popular and demanding by Industries.
Use of Smart Energy Efficiency product and Incorporation of Solar PV Power Generation Plant , High Energy Battery Storage , Water Treatment Plant, Electric Vehicle Charging Infrastructure ,Networking now most important demand by Customer's.
Electrical Safety is very important which is not only ensuring of performing Electrical Equipment's Healthy also protection human from Electrical Shocks may be lead to death.
Surge Protection mandatory and advise to use all Power Incomer in the Buildings and before entry any into Flats .
All Data ,Communication and Monitoring Device and Other if we use Copper Cable recommended Surge Protection if Cable are entering into premises from outside or Routing any High Voltage Cables .
We can reduce effect or hit any Surge to our communication and Networking if we consider to install Fiber Optics and change to Electrical Signal when enter into premises.
Another Major Threat is Lightning due to Cloud Discharge High Voltage and High Current and they Lightning Protection which we install top of the Building allow to discharge this Current Design ,Selection of Components and Installation as per IEC 62035 Conventional or NFC17-102 Advance Lighting Protection Systems.
Link Vue System offering Products ,Design , Supply and Installation extending up to AMC .
Electrical Safety
Networking
Building Automation
CCTV
Fire Alarm Systems
Access Control Systems
Security Systems
Solar PV Power Plant
High Energy Battery Storage System
Electric Vehicle Charging Infra
Industrial Freedom Plug and Socket IP 68 outdoor up to 400Amps
Building Internal Electrical Wiring Connectors Replacement of Tape Joint and Poor Termination .
All Building Power and Data Plug Sockets as per International Standard.
We request all Architect, Electrical Consultants, OEM Automation, EPC Companies, Electrical Contractors ,Interior Decorators, EV Charging Manufacturer , Solar EPC also High Energy Storage Battery Manufacturer, We also Request Smart City Project's, Municipal Corporation ,Police , Hospitals , PWD.CPWD ,Government Project Planning , Metro Rail Projects ,Airport Infra Project ,Power Distribution Companies for send their inquiries by email or contact .
Mahesh Chandra Manav HOD M-9811247237
manav.chandra@linkvuesystem.com
Power System Analysis is designed for senior undergraduate or graduates electrical engineering students studying power system analysis and design. The book gives readers a thorough understanding of the fundamental concepts of power system analysis and their applications to real-world problems.
Josh Long: Minimum Cyber Security Requirements for a 20 MW Photo Voltaic Field EnergyTech2015
EnergyTech2015.com Track 4 Session 3 RESILIENT APPLICATIONS Moderator: Mike Delamare
Josh Long: Minimum Cyber Security Requirements for a 20 MW Photo Voltaic Field
Brian Patterson: The role of Direct Current micro-grids and data centers for efficiency and resilience
Irv Badr: Managing Risk Factors in Critical Infrastructure
Induction motor is rotating type of electro-mechanical device. Induction motor convert electrical energy into mechanical energy. Induction motor is highly reliable, require less maintenance and have high efficiency. Induction motor are wide in range of operation and it used in many application because its construction is simple and robust. In past induction motor can be protected by manual operation of component such as timer, contactor, electromagnetic switch, voltage and current transformer. Protection of an induction motor against problem such as short circuit, temperature rise, single phasing and motor vibration occurring in the operation is very important. Manual operation of protection system are very slow and is not accurate. Looking to this issues, in this paper PLC based protection method is used. Which operated automatically, provide higher accuracy and quick response.
Industry tech overview by golden coffee business & investment consultingSamuel Dawit
a simple discussion type training entitled ‘’Industrial System technology Overview’’ With the Objective of Creating Discussion, Creating Documented Base Knowledge, Reminding and Brainstorming ideas on industrial System technologies that constitute eight topics with includes Industrial Power System, Industrial Control & Automation, Industrial Machines, Industrial Production method & Processes, Industrial Plant infrastructure, Industrial Materials & processes, Industrial Safety & Hazards..
Electricity is the lifeline for any building or business. Electrical power distribution system within a building or facility serves as the central nervous system of a body. Find out, how Current Solutions PC can help you with an efficient safer, and more productive electrical system design. What you electrical engineers need to know about power distribution and more. Slide now to find out the Current Solutions PC difference.
Energy Management and the Evolution of Intelligent Motor Control and Drives @...ARC Advisory Group
Energy Management and the Evolution of Intelligent Motor Control and Drives @ ARC's 2011 Industry Forum by Craig Resnick.
Intelligent motor control & drives once provided a safe, flexible & centralized means to control & protect motors
•Today, these devices have evolved to ‘smart’ energy managers that bring advances ranging from complex drive systems to basic control of fan or pump motors
•In high demand where uptime & equipment reliability are critical, in applications where even a short period of downtime can prove extremely costly & damaging
•These devices perform critical protective & troubleshooting functions & detailed diagnostics to help improve productivity & minimize downtime
This report aims to familiarize the reader with basic but important information about
two specific types of controllers – DC drives and AC drives. The first part provides
descriptions of the general working principles of variable speed drive (VSD)
technology. It discusses their main advantages and disadvantages between AC and
DC drive solutions. The second part explains some problems that could possibly be
encountered when employing AC or DC drive systems and offers practical
recommendations about how to approach these problems.
Dr Adrian West, Optima’s technical director, has spent more than 30 years working
with, programming and troubleshooting drive systems. This report is based on his
extensive practical knowledge and experience. It is, therefore, a very accurate and independent source of information.
Solar PV Power Project India and International Companies Kindly go through Important and Helpful Topic.
Solar PV Power Generation is Preference Now Days by any Country for Investment in Power Generation it's Economical and Silent Green Carbon Free Power Generation System.
Installation of Solar PV Panel is Possible Pole Mounted ,Roof Top Mounted Residential and Industrial , Ground Mounted ,Canal TOP also Water Floating .
Many Solar PV Power Developers is Accepting Very Low Tariff and due to this EPC Companies ,Solar PV Panels, Invertors and Balance Of Plants Equipment's Supply ,Design ,Engineering and Installation have to work with very Low Margin.
The Maintenance of These Plant Costing is Total Depend Selection Of Component Quality ,Design ,Engineering and Professional Approach for Installation otherwise Developer will lose Revenue because of Failure or Low Generation this incurred high cost for Maintenance.
Earthing Design for Total Plant AC and DC Array , Lightning Protection (Threat Cloud Charge Strike) and Installation of Surge Protection with DC Cable and MC4 Connectors are ignorance part in projects Later Face big Problem many time lead Fire Accidents.
Selection OF Solar PV Panels Structure and Design also very important many failure showing Selection Structure Quality and Poor Installation .
Another Challenge is Cleaning of PV Panels and Monitoring of Large Installed Solar PV Panels now days recommendation Robotics Dry Cleaning of PV Panels and Inspection through DRONE .
Solar PV Plant Size is very Large and maintained by less Staff very Difficult to Control Tree Passing and Steel /Damage by un Identify Person so Industries recommend to do Installation CCTV with Day Nigh Monitoring , Fencing of Plant (PIDS), Security System added Fire Alarm and Access Controls Systems.
Networking of Solar PV Power Plant using Fiber Optics and Wireless Infra and Extending Data ,Monitoring of plant Local and Central Level .
Link Vue System Experience to Offer Design ,Engineering ,Selection of Genuine and Right Components, Supply Support for Installation and AMC if customer require .
Electrical Safety Maintenance Free Earthing , ESE Type Lightning Protection ,Surge Protection ,Industrial Out Door Plug Sockets.
LED Street Light , CCTV Camera, Fire Alarm ,Access Controls, Security Systems, PIDS .
High Energy Battery Storage Systems
MC4 Connectors with and Without Fuse ,DC Fuse 1500V-1800 V, Current 30 Amps.
Plz go through and give feedback ,Inquiry , time for Web Presentation.
useful for Solar PV Power Plant Developer, EPC and Electrical Contractors.
MNRE /SECI/NTPC/NHPC/State Renewable Departments/Smart City/Ministry of Power/REC Ltd/BHEL/CEL/REIL/RECML
Private Solar Power Leading EPC Companies.
Visit our Website www.linkvuesystem.com
Call M-9811247237 Mahesh Chandra Manav
manav.chandra@linkvuesystem.com
Intelligence, Communicate Controls and Monitors your Building Gadgets as you want with use Smart and Efficient Devices which all can connect through Physical Cables for Power, Signal and Data Cables .
Worldwide many leading protocol Data Loggers and I/0's Digital and Analogue Field Products.
BACANET, MODBUS-TCIP ,MODBUS RTU and IEC61850 are most popular and demanding by Industries.
Use of Smart Energy Efficiency product and Incorporation of Solar PV Power Generation Plant , High Energy Battery Storage , Water Treatment Plant, Electric Vehicle Charging Infrastructure ,Networking now most important demand by Customer's.
Electrical Safety is very important which is not only ensuring of performing Electrical Equipment's Healthy also protection human from Electrical Shocks may be lead to death.
Surge Protection mandatory and advise to use all Power Incomer in the Buildings and before entry any into Flats .
All Data ,Communication and Monitoring Device and Other if we use Copper Cable recommended Surge Protection if Cable are entering into premises from outside or Routing any High Voltage Cables .
We can reduce effect or hit any Surge to our communication and Networking if we consider to install Fiber Optics and change to Electrical Signal when enter into premises.
Another Major Threat is Lightning due to Cloud Discharge High Voltage and High Current and they Lightning Protection which we install top of the Building allow to discharge this Current Design ,Selection of Components and Installation as per IEC 62035 Conventional or NFC17-102 Advance Lighting Protection Systems.
Link Vue System offering Products ,Design , Supply and Installation extending up to AMC .
Electrical Safety
Networking
Building Automation
CCTV
Fire Alarm Systems
Access Control Systems
Security Systems
Solar PV Power Plant
High Energy Battery Storage System
Electric Vehicle Charging Infra
Industrial Freedom Plug and Socket IP 68 outdoor up to 400Amps
Building Internal Electrical Wiring Connectors Replacement of Tape Joint and Poor Termination .
All Building Power and Data Plug Sockets as per International Standard.
We request all Architect, Electrical Consultants, OEM Automation, EPC Companies, Electrical Contractors ,Interior Decorators, EV Charging Manufacturer , Solar EPC also High Energy Storage Battery Manufacturer, We also Request Smart City Project's, Municipal Corporation ,Police , Hospitals , PWD.CPWD ,Government Project Planning , Metro Rail Projects ,Airport Infra Project ,Power Distribution Companies for send their inquiries by email or contact .
Mahesh Chandra Manav HOD M-9811247237
manav.chandra@linkvuesystem.com
Power System Analysis is designed for senior undergraduate or graduates electrical engineering students studying power system analysis and design. The book gives readers a thorough understanding of the fundamental concepts of power system analysis and their applications to real-world problems.
Josh Long: Minimum Cyber Security Requirements for a 20 MW Photo Voltaic Field EnergyTech2015
EnergyTech2015.com Track 4 Session 3 RESILIENT APPLICATIONS Moderator: Mike Delamare
Josh Long: Minimum Cyber Security Requirements for a 20 MW Photo Voltaic Field
Brian Patterson: The role of Direct Current micro-grids and data centers for efficiency and resilience
Irv Badr: Managing Risk Factors in Critical Infrastructure
Induction motor is rotating type of electro-mechanical device. Induction motor convert electrical energy into mechanical energy. Induction motor is highly reliable, require less maintenance and have high efficiency. Induction motor are wide in range of operation and it used in many application because its construction is simple and robust. In past induction motor can be protected by manual operation of component such as timer, contactor, electromagnetic switch, voltage and current transformer. Protection of an induction motor against problem such as short circuit, temperature rise, single phasing and motor vibration occurring in the operation is very important. Manual operation of protection system are very slow and is not accurate. Looking to this issues, in this paper PLC based protection method is used. Which operated automatically, provide higher accuracy and quick response.
Industry tech overview by golden coffee business & investment consultingSamuel Dawit
a simple discussion type training entitled ‘’Industrial System technology Overview’’ With the Objective of Creating Discussion, Creating Documented Base Knowledge, Reminding and Brainstorming ideas on industrial System technologies that constitute eight topics with includes Industrial Power System, Industrial Control & Automation, Industrial Machines, Industrial Production method & Processes, Industrial Plant infrastructure, Industrial Materials & processes, Industrial Safety & Hazards..
According to Institute of Electrical and Electronic Engineers (IEEE) standard IEEE 1100, power quality is defined as “the concept of powering and grounding sensitive electronic equipment in a manner suitable for the equipment”.
WHY POWER QUALITY MATTERS
Power quality and supply reliability are extremely important. Our world is increasingly dependent on electronic equipment and controls, and high sensitivity devices and processes are heavily dependent on a clearly defined power quality. Some facilities operate 7 days a week, 24 hours a day, so incur a high cost of downtime.
Electrical Technology was founded on the remarkable discovery by Faraday that a changing magnetic flux creates an electric field. Out of that discovery, grew the largest and most complex engineering achievement of man : the electric power system. Indeed, life without electricity is now unimaginable. Electric power systems form the basic infrastructure of a country. Even as we read this, electrical energy is being produced at rates in excess of hundreds of giga-watts (1 GW = 1,000,000,000 W). Giant rotors spinning at speeds up to 3000 rotations per minute bring us the energy stored in the potential energy of water, or in fossil fuels. Yet we notice electricity only when the lights go out!
While the basic features of the electrical power system have remained practically unchanged in the past century, but there are some significant milestones in the evolution of electrical power systems.
Roof top solar PV connected DC micro grids as smart gridsBrhamesh Alipuria
The roof top solar systems are becoming popular these days with the need for reliable power and reducing costs. Further, with recent trends to shift towards smart grids; a new system layout has been proposed which is based on the concept of DC micro grids
An overview of the specialised work carried out by Premium Power, an electrical engineering consultancy in areas such as electrical safety, risk assessment, arc flash, analytical studies, renewables and grid compliance, power quality and harmonics and hardware design, supply and commissioning.
Intrusive vs. Non-Intrusive Electric Actuators: Which option is right for you...Mead O'Brien, Inc.
Modern electric actuators offer a wide range of technologies and features, from basic motor controls to sophisticated electronic controls. Many choices are available, since no single design or feature set meets the needs of every application.
The Power System Engineering training course will help you to understand the basic concepts of power system engineering and how to start a successful career in power engineering. Furthermore, you will learn the fundamentals of electrical systems, transient and steady state analysis, main components of power systems, electrical machines, high voltage direct current system, active/reactive power control in power systems and power system operation.
Who should attend the TONEX’s Power Systems Engineering training and seminars?
Power System Engineers
Electric Power Utility Engineers
Technicians
Test Engineers
Protection and Control Engineers
Engineers Seeking PDH
Learn about:
Power system planning and advanced applications
Power systems design
Power engineering
System safety engineering
Power Markets, Energy Economics and Strategic Planning
Emerging Generation Technologies
Dynamic/static loads
Synchronous/induction motors
Synchronous/induction generators
Solar generation
Wind generation
Energy storage units
Power factor concept
High voltage direct current system (HVDC)
Multi-terminal HVDC system
Converter circuits
Concept of harmonics and filters
Active power and frequency control
Primary droop control
Reactive power and voltage control
Static VAR compensation
Synchronous condensers
Synchronous Machine Fundamentals
Power System Dynamics
Distribution Systems Planning and Engineering
Substation/Distribution Automation
Smart Grid
Fundamentals of Renewable Energy Systems
Distributed Energy Resources, Microgrids
Grid Resiliency, Energy Storage and Electric Vehicles
Training Outline:
Why Power System Engineering?
Basic Power Systems Engineering Principals
Generation, Transmission and Distribution System Planning
Fundamentals of Electric Circuits
Transient and Steady State Analysis
Power System Components
Electrical Machines
High Voltage Direct Current (HVDC) Transmission
Control of Active and Reactive Power
Power System Operation
Power System Engineering Applied
Call us today at +1-972-665-9786. Learn more about this course audience, objectives, outlines, seminars, pricing etc. Visit our website link below.
Power system engineering training
https://www.tonex.com/training-courses/power-system-engineering-training/
Course Overview
The two day course is designed for electrical engineers and operational staff involved in power generation. The content
is relevant for all types of generation involving synchronous machines; from traditional coal, oil, gas and hydro, to
offshore and nuclear. The course will give delegates a firm understanding in the operation of excitation control systems
along with an appreciation of the different types available and the numerous systems offered by the major manufacturers.
Course Learning Outcomes
Delegates will learn about:
Fundamentals of the synchronous machine
The generator capability diagram
Excitation system components
Excitation system control theory
Parallel operation of generators
Brushless / Rotating excitation systems
Static excitation systems
Power System Stabilisers
Transmission company compliance
IEEE Excitation Standards
Who Should Attend
•Electrical engineers involved in power generation both onshore and offshore
•Power plant operational staff
WHAT IS POWER QUALITY AND WHY YOU SHOULD CARE
Power Quality
"The concept of powering and grounding sensitive equipment in a manner that is suitable to the operation of that equipment."
Electronic equipment & controls are increasing
System control and energy efficiency is a priority
The modern power grid is changing
High dependence on reliable electrical systems
Some Facilities operate 7 days a week, 24 hours a day
Many facilities have high cost of downtime
2. eaton corporation Power Systems Experience Center2
One of the best things about the Power
Systems Experience Center is the ability to
test and demonstrate new technologies.
A great example of this is the photovoltaic
electric vehicle canopy.
3. Seeing is believing
eaton corporation Power Systems Experience Center 3
• Observe typical power-
quality problems as they
happen on monitored
systems
• Learn about arc flash safety
solutions
• Participate in hands-on
product testing
• Attend CEU certified
training
• Observe demonstrations in
eight typical operating
environments
Whether you want to learn the basics or finer points of
a power systems operating environment, PSEC offers a
dynamic lesson in power quality and energy management.
From novice to expert, power systems professionals
come to PSEC to:
• Consult with Eaton experts
• Evaluate both technical and
economical factors
• Watch side-by-side
comparisons of equipment
from Eaton and other
manufacturers
• Analyze energy savings
options and set realistic
expectations
• And much more
At the Power Systems Experience Center (PSEC), Eaton’s
full-scale laboratory and demonstration facility near
Pittsburgh, visitors can see firsthand the latest advances
in electrical power quality, energy management and
safety. In this controlled environment, visitors observe
product testing and performance, participate in live
demonstrations and learn about power management
technologies from Eaton experts.
4. eaton corporation Power Systems Experience Center4
1. Commercial Power System
includes transformers, UPSs,
surge protection equipment,
transfer switches, voltage
regulation, lighting control,
computer power supplies,
Power Xpert meters and
monitoring software.
2. Industrial Power System
includes variable frequency
drives, harmonic solutions,
power factor correction
equipment, motor starters,
motor control centers (MCCs),
busways, Power Xpert meters
and monitoring software,
and high intensity discharge
(HID) lights.
3. Data Center Power System
includes UPSs, power
distribution units (PDUs),
remote power panels (RPPs)
and monitoring products,
and Power Xpert gateways,
meters and monitoring
software configured in a
raised-floor environment.
4. Residential Power System
includes structured wiring,
automatic transfer switch,
generators, loadcenters, surge
protection, arc fault breakers,
ground fault breakers, Marina
Power and Lighting®.
5. Industrial Training Lab
includes medium voltage
(MV) and low voltage (LV)
power distribution equipment,
draw-out circuit breakers,
unit substation, Power Xpert
meters and monitoring
software.
6. Special Test Area includes
residential generators and
transfer switches, lighting
control, drive demos and solar
power distribution equipment.
7. Main Power System includes
utility incoming service,
alternate high impedance
source, sag generator,
monitoring and
control.
8. Green Technologies includes
a solar parking canopy,
roof-mounted solar demos,
electrical vehicle charging
systems, residential solar
inverters, commercial solar
inverters and green transfer
switch.
The PSEC experience
8. Solar Canopy >
8. Electric Vehicle Charger >
8. Solar Roof Installation >
1. Commercial Power System >
5. eaton corporation Power Systems Experience Center 5
5. Industrial Training Lab >
5.Training Room >
4. Residential Power System >
3. Data Center Power System >
6. Special Test Area >
7. Main Power System >
2. Industrial Power System >
6. eaton corporation Power Systems Experience Center6
Demonstration areas
2. Industrial Power System
• Phase shifting on drives
(12/24 pulse)
• Effects of voltage sags on
high intensity discharge (HID)
lights and drives
• Operation of 18 pulse
clean power drive
• Operation of harmonic filters
(active, passive, static
switched)
• Operation of motor control
and motor-starting equipment
• Harmonic resonance:
series and parallel
• Operation of drive
ride-through (DRT)
1. Commercial Power System
• Energy monitoring and
efficiency analysis
• Effects of voltage sag on
contactors, lights and
alarm clocks
• Operation of lighting control
• Operation of undervoltage
and unbalance alarms
• Operation of harmonic
mitigating transformers
(HMT)
• Operation of online, offline
and line interactive UPSs
• Operation of 3rd harmonic
blocking filter
• Operation of electronic
voltage regulator (EVR)
3. Data Center Power System
• Effects of generator (weak)
source
• Operation of UPS units in
high-efficiency and redundant
modes
• Effects of voltage sags and
interruptions on data center
equipment
• Operation of 3-phase and
1-phase UPS
• Operation of active rectifier
on UPSs
• Operation of power
distribution units (PDU) and
remote power panels (RPP)
• Operation of PDU branch
circuit monitoring
• Demonstration of rack/
cooling systems
• Operation of static switches
Facility managers
Consultants
Contractors
Engineers
Executives Distributors
Owners
Operators
Students
Who should visit?
4. Residential Power System
• Effects of nearby industrial
loads on power system
• Effects of improperly wired
outlets
• Effects of open neutral
• Effects of voltage sag on
residential loads
• Operation of automatic
transfer on power loss
• Operation of surge protection
• Operation of arc fault
interruption
• Operation of ground fault
interruption
• Operation of structured
wiring
• Comparison of energy-
efficient devices for
residential applications
7. eaton corporation Power Systems Experience Center 7
7. Main Power System
• Power quality monitoring and
event capture
• Time synchronization for
events
• Effects of normal versus
alternate source
• Effects of surges
• Effects of voltage sags
and interruptions
• Operation of voltage sag
correction
• Operation of high resistance
grounding (HRG) unit
• Operation of lighting control
• Arc flash labeling exhibits
5. IndustrialTraining Lab
• Effects of normal versus
alternate source
• Safety training
• Draw-out circuit breaker
training
• Operation of motor control
and motor-starting equipment
• Operation of medium voltage
(MV) systems
• Design and monitoring
considerations for MV
systems
• Operation of GearGard®
monitoring
8. GreenTechnologies
• Application of solar and
electric vehicle charging on
canopy system
• Demonstration of solar panel
mounting options
• Operation of solar rooftop
inverters
• Operation of residential
solar inverters
• Operation of 250 kW
commercial solar inverter
• Operation of Level I, Level II
and DC Quick Charge electric
vehicle charging
• Operation of lighting control
systems
• Demonstration of solar
balance of system
equipment (disconnects,
combiners, metering, etc.)
• Commercial
• Data Center
• Education
• Electric Transportation
Infrastructure
• Electric Utility
• Government and Military
• Healthcare
PSEC welcomes more than 3,000 visitors
every year from all industries.
• Industrial
• Mining and Minerals
• MOEM
• Nuclear
• Oil and Gas
• Residential
• Solar
• Wind
6. SpecialTest Area
• Operation of residential
generators and transfer
switches
• Operation of residential load
shedding system
• Application of battery storage
• Lighting control
demonstration
• Drive demonstrations
• Short circuit/coordination
demonstration
• Energy savings
demonstrations
• Solar power/DC arc fault
testing