Product+overview vibrafoam e
•
0 likes•110 views
Vibrafoam provides effective protection against vibration and shock. This High-tech polyurethane elastomer can be used as two-dimensional matting for decoupling components, as a blank according to the respective component geometry or as custom-made molding. We offer a wide range of 13 standard materials and also offer the possibility to produce special types in various colours and thicknesses to suit your requirements
Report
Share
Report
Share
Download to read offline
![specificload[N/mm²]
PURASYS vibrafoam type
0,001
SD
10
SD
16
SD
26
SD
40
SD
65
SD
110
SD
170
SD
260
SD
400
SD
650
SD
950
SD
1300
SD
1900
0,01
0,1
1
10
KRAIBURG PuraSys GmbH & Co. KG
Porschestraße 1
49356 Diepholz
www.purasys.com
Product overview
vibrafoamP U R A S Y S
© KRAIBURG PuraSys GmbH & Co. KG Release 1.0 of 01.04.2016 page 1 of 1
PURASYS vibrafoam series
Working range
Material mixed cellular polyether-urethane
Characteristic
Delivery specifications
Thickness: 12.5 mm and 25 mm
Mats: 0.5 m wide, 2.0 m long
Stripes: max. 2.0 m long
Other dimensions on request
(also stamping parts, moulded parts).
spring damper
Properties Test method
Colour red pink orange yellow
bright
green
green
dark
green
petrol blue
dark
blue
dark
violet
violet
bordeaux
red
Static loads [N/mm2
] (1)
0.010 0.016 0.026 0.040 0.065 0.110 0.170 0.260 0.400 0.650 0.950 1.300 1.900
Dynamic loads [N/mm2
] (1)
0.016 0.026 0.040 0.065 0.110 0.170 0.260 0.400 0.650 0.950 1.450 2.000 2.800
Load peaks [N/mm2
] (1)
0.5 0.7 1.0 2.0 2.5 3.0 3.5 4.0 4.5 5.5 6.0 6.5 7.0
Mechanical loss factor (2)
0.25 0.24 0.22 0.15 0.18 0.12 0.13 0.11 0.10 0.10 0.10 0.09 0.09 DIN 53513 (3)
Static E-modulus [N/mm2
] (2)
0.048 0.111 0.129 0.316 0.453 0.861 0.931 1.64 2.72 4.57 8.16 12.0 20.4 DIN 53513 (3)
Dynamic E-modulus [N/mm2
] (2)
0.144 0.328 0.443 0.743 1.06 1.86 2.27 3.63 5.27 10.4 21.5 35.2 78.2 DIN 53513 (3)
Resistancetostrainat10%deformation[N/mm2
] 0.011 0.018 0.026 0.046 0.073 0.130 0.170 0.270 0.370 0.590 0.930 1.340 1.840
Residual compression set [%] < 5 < 5 < 5 < 5 < 5 < 5 < 5 < 5 < 6 < 7 < 9 < 9 < 8 DIN ISO 1856
Tensile strength [N/mm2
] > 0.35 > 0.40 > 0.45 > 0.55 > 0.70 > 0.95 > 1.25 > 1.65 > 2.25 > 3.00 > 3.80 > 4.40 > 5.00 DIN 53455-6-4
Elongation at break [%] > 400 > 400 > 400 > 400 > 400 > 400 > 400 > 400 > 400 > 400 > 400 > 400 > 400 DIN 53455-6-4
Rebound elasticity [%] 50 50 50 50 50 50 50 50 50 50 50 50 50 DIN EN ISO 8307
Specific volume resistance [Ω⋅cm] > 1012
> 1012
> 1011
> 1011
> 1011
> 1011
> 1011
> 1011
> 1011
> 1011
> 1011
> 1011
> 1011
DIN IEC 93
Thermal conductivity [W/m⋅K] 0.05 0.05 0.06 0.07 0.07 0.08 0,08 0.08 0.10 0.10 0.11 0.11 0.11 DIN 52612-1
Operating temperature [°C] - 30 to + 70
Temperature peak [°C] + 120
Inflammability Class E / EN 13501-1 EN ISO 11925-1
(1)
Values apply to shape factor q = 3
(2)
Measured at maximum limit of static application range
(3)
Test according to respective standards
All information and data is based on our current knowledge. The data are subject to typical manufacturing tolerances and are not guaranteed.
We reserve the right to amend the data.
SD
10
SD
16
SD
26
SD
40
SD
65
SD
110
SD
170
SD
260
SD
400
SD
650
SD
950
SD
1300
SD
1900](https://image.slidesharecdn.com/productoverviewvibrafoame-160602104610/85/Product-overview-vibrafoam-e-1-320.jpg)
Recommended
Hutchinson Stop-Choc Automotive and Trucks
A revolutionery range of products which is used in various applications in the Automotive and Trucks industry to control Noise and vibrations. Ideal for NVH teams , e-cars, Hybrids etc....
Hocine Dahmane
Key account Manager
hocine.dahmane@stop-choc.de
+4917622094808
Thermobreak AcoustiPlus - Brochure 230914 D
Thermobreak is a new open cell polyolefin foam duct liner called AcoustiPlus. It provides excellent acoustic absorption even at low thicknesses, meets various fire safety standards, and is anti-microbial. It has additional benefits such as being fiber-free, PVC-free, lightweight, durable, and resistant to erosion. It is available in rolls and sheets in thicknesses of 15mm and 24mm.
Lubricants By Witmans Industries Private Limited
(www.witcollubricants.com) Witmans Industries Pvt. Ltd. is an ISO 9001:2008 certified business entity engaged in manufacturing, supplying, trading and exporting a comprehensive assortment of Industrial Oil, Greases, Paints and Waxes. Our range is developed in strict accordance with the global quality standards by utilizing premium quality raw material, modern machinery & genuine techniques. Owing to the qualitative fabrications, our range is widely appreciated for high thermal stability, rust, corrosion, wear, foam & moisture resistance and durability.
DuraForm Flex Plastic - SLS Systems - Material properties (EN)
A durable, rubber-like material with good tear resistance and burst strength. Address broad applications requiring rubber-like flexibility and durability. For Gaskets, hoses and seals applications, etc.
AVIBLIS - Films for Pharmaceutical Blister Packing
AVIBLIS - Films for Pharmaceutical Blister PackingAVI Global Plast - Food Packaging films Manufacturing Company
The technical specification sheet provides information on grade AVIBLIS pharmaceutical blister packing materials including that it comes in clear, translucent, and opaque colors with a glossy surface. Thickness can range from 100 to 900 microns with specified tolerances. The material has good impact strength and tensile strength while meeting RoHS standards for restricted substances. Oxygen and water vapor transmission rates are provided.Kluberpaste hel-46-450 Mr Tùng - 0987 988 407 | www.khodaumo.com
Klüberpaste HEL 46-450 is a high-temperature screw paste suitable for temperatures between -40°C and 1000°C. It provides reliable screw connections through constant preload force even after long periods of high heat. Testing showed nuts retained less than the required 120 Nm of torque after 100 hours at 750°C, demonstrating the paste's effectiveness. The fully synthetic formula spreads easily and prevents excess lubrication on contact surfaces.
Flexible busbar - Dây đồng bện
Termate manufactures high performance flexible conductors and components. Their flexible conductors are made of copper and PVC insulation, and enable easy bending with high flexibility. They have been manufacturing electrical components since 1956 and have a global customer base supported by an international distribution network. Their flexible conductors come in a range of sizes and can be cut to length as required by customers.
DuraForm FR 100 Plastic - SLS Systems - Material properties (EN)
In addition to meeting the flame retardancy necessary for many potential aerospace applications, DuraForm® FR100 has been formulated to reduce production of smoke and related toxic byproducts of combustion and achieve UL94 V-0 rating to meet the needs of today’s human environmental safety for many other consumer applications. For electrical appliances, aerospace and aircraft cabin, compartment & cargo applications, etc.
Recommended
Hutchinson Stop-Choc Automotive and Trucks
A revolutionery range of products which is used in various applications in the Automotive and Trucks industry to control Noise and vibrations. Ideal for NVH teams , e-cars, Hybrids etc....
Hocine Dahmane
Key account Manager
hocine.dahmane@stop-choc.de
+4917622094808
Thermobreak AcoustiPlus - Brochure 230914 D
Thermobreak is a new open cell polyolefin foam duct liner called AcoustiPlus. It provides excellent acoustic absorption even at low thicknesses, meets various fire safety standards, and is anti-microbial. It has additional benefits such as being fiber-free, PVC-free, lightweight, durable, and resistant to erosion. It is available in rolls and sheets in thicknesses of 15mm and 24mm.
Lubricants By Witmans Industries Private Limited
(www.witcollubricants.com) Witmans Industries Pvt. Ltd. is an ISO 9001:2008 certified business entity engaged in manufacturing, supplying, trading and exporting a comprehensive assortment of Industrial Oil, Greases, Paints and Waxes. Our range is developed in strict accordance with the global quality standards by utilizing premium quality raw material, modern machinery & genuine techniques. Owing to the qualitative fabrications, our range is widely appreciated for high thermal stability, rust, corrosion, wear, foam & moisture resistance and durability.
DuraForm Flex Plastic - SLS Systems - Material properties (EN)
A durable, rubber-like material with good tear resistance and burst strength. Address broad applications requiring rubber-like flexibility and durability. For Gaskets, hoses and seals applications, etc.
AVIBLIS - Films for Pharmaceutical Blister Packing
AVIBLIS - Films for Pharmaceutical Blister PackingAVI Global Plast - Food Packaging films Manufacturing Company
The technical specification sheet provides information on grade AVIBLIS pharmaceutical blister packing materials including that it comes in clear, translucent, and opaque colors with a glossy surface. Thickness can range from 100 to 900 microns with specified tolerances. The material has good impact strength and tensile strength while meeting RoHS standards for restricted substances. Oxygen and water vapor transmission rates are provided.Kluberpaste hel-46-450 Mr Tùng - 0987 988 407 | www.khodaumo.com
Klüberpaste HEL 46-450 is a high-temperature screw paste suitable for temperatures between -40°C and 1000°C. It provides reliable screw connections through constant preload force even after long periods of high heat. Testing showed nuts retained less than the required 120 Nm of torque after 100 hours at 750°C, demonstrating the paste's effectiveness. The fully synthetic formula spreads easily and prevents excess lubrication on contact surfaces.
Flexible busbar - Dây đồng bện
Termate manufactures high performance flexible conductors and components. Their flexible conductors are made of copper and PVC insulation, and enable easy bending with high flexibility. They have been manufacturing electrical components since 1956 and have a global customer base supported by an international distribution network. Their flexible conductors come in a range of sizes and can be cut to length as required by customers.
DuraForm FR 100 Plastic - SLS Systems - Material properties (EN)
In addition to meeting the flame retardancy necessary for many potential aerospace applications, DuraForm® FR100 has been formulated to reduce production of smoke and related toxic byproducts of combustion and achieve UL94 V-0 rating to meet the needs of today’s human environmental safety for many other consumer applications. For electrical appliances, aerospace and aircraft cabin, compartment & cargo applications, etc.
Powder Column FINAL
1) As electronics components shrink in size, the solder powder particles used in solder paste must also decrease to enable soldering of smaller interconnects. Solder powder particles are manufactured through an atomization process that involves melting alloy and dispersing it into tiny spherical droplets.
2) The size of solder powder particles is classified according to standard mesh screen sizes, ranging from Type 1 at 150-75 micrometers down to Type 7 at 11-2 micrometers. Type 3 and 4 particles between 25-45 micrometers and 20-38 micrometers respectively are most commonly used for mainstream surface mount applications.
3) While finer Type 5 powder between 10-25 micrometers may help with printing very small
ArmorCote
The ArmorCote coating for u-bolts has been developed over decades using cross-linked polyolefin material. It provides high compressive strength and abrasion resistance while allowing for pipe movement without damage. The UV-stabilized thermoplastic maintains integrity during prolonged sun exposure. Unlike other coatings, ArmorCote resists tearing or unraveling over time. It has been used successfully on offshore pipe hangers since 1984.
The material of smc manhole cover / Batch test
This document provides specifications and service life information for SMC (Sheet Moulding Compound) manhole covers. SMC is made of unsaturated polyester resin, glass fibers, calcium carbonate, and other additives. Specifications include a glass fiber content of 20%, flexural strength of 125MPa, and heat distortion temperature over 200°C. The service life of SMC manhole covers is estimated to be over 30 years due to heat and wear resistance from the surface layer composition and ability to withstand over 2 million fatigue shocks without cracking. Load ratings range from A15 which can support 1.5 tons to D400 which can support 40 tons.
Ceramic Coated Separator for Lithium-Ion Batteries
Targray ceramic coated separators are used by li-ion battery manufacturers to maximize lithium-ion battery cell performance. For more information visit www.targray.com
FiloFlex resin
Filoflex is a two-part polyurethane resin designed for repairing and encapsulating electrical cables and connections underwater or in portable applications. It has high adhesion, toughness, and electrical strength. Filoflex has an operating temperature range of -50 to +120°C and can withstand up to 130°C. It is also resistant to seawater, has low water absorption, and is RoHS compliant and non-toxic.
Nanshan Aluminum presentation v2016
Nanshan aluminum is high-end aluminum products manufacturer.Including aluminum plate, sheet, strip, profile, aluminum foil.
Top 2 aluminum foil supplier in China
Peak performance laminator
The document summarizes two commercial pouch laminating systems, the PS-320 and PS-450. Both systems offer laminating speeds up to 250-1200 mm/min, laminating thickness up to 500 microns, and operating temperatures from 0-175 degrees Celsius. The PS-450 has a larger maximum width of 450mm compared to 320mm for the PS-320. Both systems have a 2 year warranty and feature a new patented Teflon carrier that eliminates jams and repairs.
Electrolube, Selector de productos electrolube. Antala Industria.
This document provides information on various products for thermal management, conformal coatings, cleaning solutions, lubricants, and resins. For each product line, it lists specific products and provides data on their key properties such as thermal conductivity, viscosity, temperature range, dielectric strength, etc. This allows users to select the appropriate product for their specific application and requirements.
3M Scotchcast Resin, Epoxy Resin 281
3M Scotchcast Electrical Resin 281 is a two-part, semi-flexible epoxy resin characterized by high temperature stability, flexibility, and thermal and electrical properties. It can be cured at low temperatures but optimal properties are obtained at higher cure temperatures. Applications include impregnation and encapsulation of electrical components to provide greater mechanical strength, tensile strength, thermal shock resistance, and thermal conductivity compared to other resins.
PP Battery Separator for Lithium-Ion Battery Manufacturing
Targray polypropylene battery separators are used in the development of lithium-ion batteries. Li-ion battery manufacturers use PP separators for ion transportation within the battery cell.
Nu glaze specifications – technical data
RX320 is an unplasticised PVC compound designed for outdoor profiles that can last up to 5 years depending on processing and environmental conditions. It has a density of 1.47 g/cm3, Shore D hardness of 84, tensile strength of 40 MPa, and elongation of 25%. NU-GLAZE 600 is a fast curing, low modulus silicone sealant recommended for use in building joints and glazing applications. It adheres well to various substrates, cures within 15 minutes, and can withstand temperatures from -50 to 100 degrees Celsius.
Wearplates comparison
WearPro is SteelClik's brand of abrasion resistant steel plates available in thicknesses from 2mm to 120mm and grades from AR400 to AR650. These plates are suitable for applications in industries like mining, construction, and material handling due to their ability to withstand tough conditions without deforming or cracking. WearPro plates offer extended service life through their unique hardness and toughness. Their weldability and bendability also allow for innovative steel structure and component designs that improve payload and efficiency while lowering costs. SteelClik ensures consistent properties and quality in WearPro plates through careful material selection and heat treatment processes.
Tpu 종합 catalogue #2
This document summarizes the properties and applications of different grades of ACE-THANE thermoplastic polyurethane (TPU). It describes several standard extrusion and injection grades with various hardness levels, as well as breathable, low hardness, PCL and ether grades. Physical properties like hardness, modulus, strength and elongation are provided for each grade. Common applications mentioned include tubes, sheets, films, air bags, shoes, ski accessories, seals and gaskets.
Functionalized Fluoropolymers For Automotive Applications
AGC's newest additions to its adhesive-grade product lineup provide industry-leading performance across an expanded range of applications in the automotive, oil and gas, chemical, building and construction, packaging and electronics industries. Each is formulated for ease of use within its respective processing environment and is backed by AGC's longstanding reputation as a leading provider of functionalized adhesives.
3M Scotchcast Resin - No. 2130 Flame Retardant Resin
3M Scotchcast 2130 Electrical Insulating Resin is a special flame retardant, two-part, polyurethane resin that is designed to replace the cable jacket or sheath when cable jointing or repairing flexible cables - including flexible and trailing mining and shipwiring cables.
3M Scotchcast 2130 resin is suitable for submerged (seawater) and offshore applications.
Loctite 2701
This technical data sheet provides information on Loctite 2701, a one-part anaerobic adhesive. It cures rapidly at room temperature when confined between close-fitting metal surfaces. The document includes typical properties of the uncured and cured adhesive. It also provides test results on performance characteristics like strength at different temperatures, with primers, and resistance to solvents. Guidelines are given for storage, directions of use, and limitations.
3M Scotchcast 82F2 Inline Submersible Offshore Cable Joint Seawater Resistant
3M Scotchcast 82F2 Inline Submersible Offshore Cable Joint Seawater ResistantThorne & Derrick International
This document provides information on 3M Scotchcast 82-F and 82-BF Series Flexible Power Cable Splicing Kits. The kits are used to make permanent inline and tap splices for non-shielded portable power cables and cords rated up to 1000 Volts. Each kit contains molding materials and instructions to splice single or multi-conductor cables. The completed splices are flexible, flame retardant and can be used in various outdoor and submerged environments. The document outlines specifications, installation instructions, and performance test results for the splicing kits.Dri pak25
The document describes the DriPak® 25 synthetic pocket filter. It has a high dust holding capacity and robust pocket design that makes it suitable for difficult conditions. As a prefilter, it protects higher efficiency filters and prolongs their service life, reducing maintenance needs. It has a low resistance to airflow and is classified as a G4 filter according to EN779 standards. Technical data and specifications for the filter are provided, including dimensions, airflow capacities, and resistance levels.
Damian Dominic Lello cv
Damian Dominic Lello is a 45-year-old married coloured male from Durban with over 20 years of experience in security, industrial cleaning, and sales. He has worked as a site manager, operations manager, quality assurance officer, and sales consultant for various companies in KwaZulu-Natal. Lello has a matric certificate and various other qualifications in security, fire prevention, first aid, shooting, and computer skills. He is competent in communication, customer service, risk-taking, and relationship-building.
Feed machinery catalogue
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help boost feelings of calmness, happiness and focus.
Post Office
This document proposes a strategy to improve perceptions of the Post Office by harnessing people's time spent waiting in queues. The strategy would involve (1) counting customer wait times in December, (2) having that time "given back" via community projects voted on by customers, and (3) involving Post Office staff as volunteers on the projects. This is aimed at changing negative perceptions, rewarding customers, and demonstrating that the Post Office values customers' time while strengthening relationships with local communities.
More Related Content
What's hot
Powder Column FINAL
1) As electronics components shrink in size, the solder powder particles used in solder paste must also decrease to enable soldering of smaller interconnects. Solder powder particles are manufactured through an atomization process that involves melting alloy and dispersing it into tiny spherical droplets.
2) The size of solder powder particles is classified according to standard mesh screen sizes, ranging from Type 1 at 150-75 micrometers down to Type 7 at 11-2 micrometers. Type 3 and 4 particles between 25-45 micrometers and 20-38 micrometers respectively are most commonly used for mainstream surface mount applications.
3) While finer Type 5 powder between 10-25 micrometers may help with printing very small
ArmorCote
The ArmorCote coating for u-bolts has been developed over decades using cross-linked polyolefin material. It provides high compressive strength and abrasion resistance while allowing for pipe movement without damage. The UV-stabilized thermoplastic maintains integrity during prolonged sun exposure. Unlike other coatings, ArmorCote resists tearing or unraveling over time. It has been used successfully on offshore pipe hangers since 1984.
The material of smc manhole cover / Batch test
This document provides specifications and service life information for SMC (Sheet Moulding Compound) manhole covers. SMC is made of unsaturated polyester resin, glass fibers, calcium carbonate, and other additives. Specifications include a glass fiber content of 20%, flexural strength of 125MPa, and heat distortion temperature over 200°C. The service life of SMC manhole covers is estimated to be over 30 years due to heat and wear resistance from the surface layer composition and ability to withstand over 2 million fatigue shocks without cracking. Load ratings range from A15 which can support 1.5 tons to D400 which can support 40 tons.
Ceramic Coated Separator for Lithium-Ion Batteries
Targray ceramic coated separators are used by li-ion battery manufacturers to maximize lithium-ion battery cell performance. For more information visit www.targray.com
FiloFlex resin
Filoflex is a two-part polyurethane resin designed for repairing and encapsulating electrical cables and connections underwater or in portable applications. It has high adhesion, toughness, and electrical strength. Filoflex has an operating temperature range of -50 to +120°C and can withstand up to 130°C. It is also resistant to seawater, has low water absorption, and is RoHS compliant and non-toxic.
Nanshan Aluminum presentation v2016
Nanshan aluminum is high-end aluminum products manufacturer.Including aluminum plate, sheet, strip, profile, aluminum foil.
Top 2 aluminum foil supplier in China
Peak performance laminator
The document summarizes two commercial pouch laminating systems, the PS-320 and PS-450. Both systems offer laminating speeds up to 250-1200 mm/min, laminating thickness up to 500 microns, and operating temperatures from 0-175 degrees Celsius. The PS-450 has a larger maximum width of 450mm compared to 320mm for the PS-320. Both systems have a 2 year warranty and feature a new patented Teflon carrier that eliminates jams and repairs.
Electrolube, Selector de productos electrolube. Antala Industria.
This document provides information on various products for thermal management, conformal coatings, cleaning solutions, lubricants, and resins. For each product line, it lists specific products and provides data on their key properties such as thermal conductivity, viscosity, temperature range, dielectric strength, etc. This allows users to select the appropriate product for their specific application and requirements.
3M Scotchcast Resin, Epoxy Resin 281
3M Scotchcast Electrical Resin 281 is a two-part, semi-flexible epoxy resin characterized by high temperature stability, flexibility, and thermal and electrical properties. It can be cured at low temperatures but optimal properties are obtained at higher cure temperatures. Applications include impregnation and encapsulation of electrical components to provide greater mechanical strength, tensile strength, thermal shock resistance, and thermal conductivity compared to other resins.
PP Battery Separator for Lithium-Ion Battery Manufacturing
Targray polypropylene battery separators are used in the development of lithium-ion batteries. Li-ion battery manufacturers use PP separators for ion transportation within the battery cell.
Nu glaze specifications – technical data
RX320 is an unplasticised PVC compound designed for outdoor profiles that can last up to 5 years depending on processing and environmental conditions. It has a density of 1.47 g/cm3, Shore D hardness of 84, tensile strength of 40 MPa, and elongation of 25%. NU-GLAZE 600 is a fast curing, low modulus silicone sealant recommended for use in building joints and glazing applications. It adheres well to various substrates, cures within 15 minutes, and can withstand temperatures from -50 to 100 degrees Celsius.
Wearplates comparison
WearPro is SteelClik's brand of abrasion resistant steel plates available in thicknesses from 2mm to 120mm and grades from AR400 to AR650. These plates are suitable for applications in industries like mining, construction, and material handling due to their ability to withstand tough conditions without deforming or cracking. WearPro plates offer extended service life through their unique hardness and toughness. Their weldability and bendability also allow for innovative steel structure and component designs that improve payload and efficiency while lowering costs. SteelClik ensures consistent properties and quality in WearPro plates through careful material selection and heat treatment processes.
Tpu 종합 catalogue #2
This document summarizes the properties and applications of different grades of ACE-THANE thermoplastic polyurethane (TPU). It describes several standard extrusion and injection grades with various hardness levels, as well as breathable, low hardness, PCL and ether grades. Physical properties like hardness, modulus, strength and elongation are provided for each grade. Common applications mentioned include tubes, sheets, films, air bags, shoes, ski accessories, seals and gaskets.
Functionalized Fluoropolymers For Automotive Applications
AGC's newest additions to its adhesive-grade product lineup provide industry-leading performance across an expanded range of applications in the automotive, oil and gas, chemical, building and construction, packaging and electronics industries. Each is formulated for ease of use within its respective processing environment and is backed by AGC's longstanding reputation as a leading provider of functionalized adhesives.
3M Scotchcast Resin - No. 2130 Flame Retardant Resin
3M Scotchcast 2130 Electrical Insulating Resin is a special flame retardant, two-part, polyurethane resin that is designed to replace the cable jacket or sheath when cable jointing or repairing flexible cables - including flexible and trailing mining and shipwiring cables.
3M Scotchcast 2130 resin is suitable for submerged (seawater) and offshore applications.
Loctite 2701
This technical data sheet provides information on Loctite 2701, a one-part anaerobic adhesive. It cures rapidly at room temperature when confined between close-fitting metal surfaces. The document includes typical properties of the uncured and cured adhesive. It also provides test results on performance characteristics like strength at different temperatures, with primers, and resistance to solvents. Guidelines are given for storage, directions of use, and limitations.
3M Scotchcast 82F2 Inline Submersible Offshore Cable Joint Seawater Resistant
3M Scotchcast 82F2 Inline Submersible Offshore Cable Joint Seawater ResistantThorne & Derrick International
This document provides information on 3M Scotchcast 82-F and 82-BF Series Flexible Power Cable Splicing Kits. The kits are used to make permanent inline and tap splices for non-shielded portable power cables and cords rated up to 1000 Volts. Each kit contains molding materials and instructions to splice single or multi-conductor cables. The completed splices are flexible, flame retardant and can be used in various outdoor and submerged environments. The document outlines specifications, installation instructions, and performance test results for the splicing kits.Dri pak25
The document describes the DriPak® 25 synthetic pocket filter. It has a high dust holding capacity and robust pocket design that makes it suitable for difficult conditions. As a prefilter, it protects higher efficiency filters and prolongs their service life, reducing maintenance needs. It has a low resistance to airflow and is classified as a G4 filter according to EN779 standards. Technical data and specifications for the filter are provided, including dimensions, airflow capacities, and resistance levels.
What's hot (18)
Ceramic Coated Separator for Lithium-Ion Batteries
Ceramic Coated Separator for Lithium-Ion Batteries
Electrolube, Selector de productos electrolube. Antala Industria.
Electrolube, Selector de productos electrolube. Antala Industria.
PP Battery Separator for Lithium-Ion Battery Manufacturing
PP Battery Separator for Lithium-Ion Battery Manufacturing
Functionalized Fluoropolymers For Automotive Applications
Functionalized Fluoropolymers For Automotive Applications
3M Scotchcast Resin - No. 2130 Flame Retardant Resin
3M Scotchcast Resin - No. 2130 Flame Retardant Resin
3M Scotchcast 82F2 Inline Submersible Offshore Cable Joint Seawater Resistant
3M Scotchcast 82F2 Inline Submersible Offshore Cable Joint Seawater Resistant
Viewers also liked
Damian Dominic Lello cv
Damian Dominic Lello is a 45-year-old married coloured male from Durban with over 20 years of experience in security, industrial cleaning, and sales. He has worked as a site manager, operations manager, quality assurance officer, and sales consultant for various companies in KwaZulu-Natal. Lello has a matric certificate and various other qualifications in security, fire prevention, first aid, shooting, and computer skills. He is competent in communication, customer service, risk-taking, and relationship-building.
Feed machinery catalogue
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help boost feelings of calmness, happiness and focus.
Post Office
This document proposes a strategy to improve perceptions of the Post Office by harnessing people's time spent waiting in queues. The strategy would involve (1) counting customer wait times in December, (2) having that time "given back" via community projects voted on by customers, and (3) involving Post Office staff as volunteers on the projects. This is aimed at changing negative perceptions, rewarding customers, and demonstrating that the Post Office values customers' time while strengthening relationships with local communities.
Sheerin Fathima
This document contains the resume of Sheerin Fathima. It summarizes her contact information, 3+ years of experience in team development and client interaction for telecom and network planning projects. She has strong problem solving, analytical and communication skills. Her contributions include process improvement projects using Lean Six Sigma that reduced costs. She has experience managing teams and ensuring quality and performance standards are met. Her career highlights include roles with Tata Consultancy Services, Sulekha.com, and Consim Info Pvt Ltd with responsibilities like managing teams, quality checks, training, and attending to client queries.
Honeycomb work samples
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise boosts blood flow, releases endorphins, and promotes changes in the brain which help enhance one's emotional well-being and mental clarity.
Indian postal services - financial Management 2012
India Post offers several investment and insurance schemes. Savings accounts allow interest earning deposits with cheque access. Recurring deposit accounts have a 5 year maturity with quarterly deposits earning 8.4% interest. Monthly income schemes provide 8.5% interest over 5 years. Time deposits from 1-5 years earn between 8.2-8.5% interest compounded quarterly. National savings certificates are secure government backed investments that offer tax benefits and 8% annual interest over 6-10 year maturities. Postal life insurance provides whole or term life coverage up to Rs. 10 lakhs for eligible government and bank employees.
Merging layers
To merge logos at the bottom of a page so they can be moved together without changing their positions relative to each other, select the layers containing the logos by holding Ctrl and right clicking on one of the layers, then select "merge layers" from the menu to combine them all onto a single layer.
The Henry Ford's Digital Platform: Developing a Digital Content Engine
Presentation given at the MMA/AASLH 2016 unconference at The Henry Ford on 9/17/16, covering The Henry Ford's digital platform and digital content efforts.
Hilal Aslim personal CV
Hilal Abd Allah Aslim is a Lebanese national seeking a technical director position with over 20 years of experience in food manufacturing. He has extensive experience maintaining and repairing various food processing machinery including pasta lines, ovens, wrapping machines, and more. Currently he is the maintenance manager at a pasta and spaghetti factory in Ghana, where he manages a team of 150 employees and provides consultation on new equipment procurement.
Tensioned Membrane Structures In India
This document lists numerous tensioned membrane structure projects in India executed using materials and systems from Taiyo Membrane Corp and other companies. It provides details on entrance canopies, arrival areas, taxi stands, shopping areas, food courts, stadiums, car parks, pedestrian bridges, pools and more at various airports, malls, colleges, offices and residential complexes across major Indian cities like Mumbai, Delhi, Bangalore, Hyderabad, Pune, Chennai etc. executed by membrane specialist companies between 2005-2015.
Viewers also liked (11)
Indian postal services - financial Management 2012
Indian postal services - financial Management 2012
The Henry Ford's Digital Platform: Developing a Digital Content Engine
The Henry Ford's Digital Platform: Developing a Digital Content Engine
Similar to Product+overview vibrafoam e
American Rep BOWMET Catalogue 0116 Low Res
The document discusses Bowman International's new range of plain bearings called BowMet that are manufactured from a proprietary material called ToughMet spinodal bronze. BowMet bearings offer higher load capacity and greater heat, speed, and corrosion resistance compared to other plain bearings, resulting in significantly longer life. The bearings can be used across a wide range of industries and applications, from heavy machinery to aircraft and marine uses. The manufacturing process using rolling gives very low waste and is more cost effective than machined alternatives.
Techfluid BOP Fire-Rated Hose
Hydraulic BOP Flameguard 5000 range is a hydraulic control hose that operates whilst exposed directly to fire for a minimum of 5 minutes ensuring all well control operations can be effective in an emergency situation.
Fire Rated/Deluge Flameguard 300 selection is design for emergency situations where operation must continue in fire conditions. Our fire rated range is utilised on offshore installations, the hose will operate in a fire for a minimum of 30 minutes offering platform personnel an escape route in emergency situations.
Pu tube-material in SIngapore
Aluminum piping for compressed air is a new concept which is basically using Push In fittings to join aluminum pipe. It takes a very limited amount of time and no tools are required for the same. It can be used for pressures upto 17 bar and because of the fact that all fittings and pipes are made in aluminum there is a good durability of the system and the air system remains corrosion free and leakage free for years. Owing to the beautiful system design, it becomes very easy to re-open and again assemble the fittings from the pipe so mobility is increased and it becomes very easy to dismantle an entire pneumatic system and relocate it or modify it as per the user's requirements.
Thermobreak Solar - Brochure 230914 D
Thermobreak is a high temperature pipe insulation material for solar heating systems. It is made of crosslinked closed cell polyolefin foam with a reinforced aluminum foil layer and can withstand temperatures up to 160°C. It comes in various thicknesses and sizes to insulate different diameter pipes. Thermobreak has high insulating properties, is resistant to UV light and moisture, and meets international fire safety standards.
How do Anti-Friction Coatings based on Binder Systems eliminate noise in auto...
Presented at the 20th International Colloquium Tribology at the TAE, Esslingden in January 2016, Dr Manfred Jungk describes how antifriction coatings can eliminate noise in automotive interiors. Recently appointed to the board of the German Tribology Society, Molykote’s Dr Manfred Jungk has a passion for creative thinking that provides effective lubrication solutions to the automotive industry. His latest presentation demonstrates the innovative use of antifriction coatings to eliminate noise in automotive interiors with dry-film, plastic binding, high resistance, non-stick-slip coatings.
Catalogue for pharma glass package
Shandong HonHai Industrial Co. Ltd. is a leading manufacturer of pharmaceutical glass packaging in China. They produce a wide range of glass containers including neutral pharmaceutical glass tubes, tubular glass vials, ampoules, molded glass vials, bottles, cartridges, and blood collection tubes. The company strives to continuously improve quality and meet market demands.
Thermobreak Thermacoil - Brochure 270814 D
This document describes Thermacoil, a pre-insulated pipe insulation made of physically crosslinked polyolefin foam with an aluminum foil vapor seal. It can be used for refrigeration and HVAC applications. Key features include compliance with fire and thermal standards, green building ratings, and copper tubing manufactured to Australian standards. It comes in coil and sheet forms in various sizes for insulating pipes from 6mm to 50mm diameters.
Resistor vishay 0603
This document provides specifications for Vishay's standard thick film chip resistors. It includes details on features, electrical specifications, dimensions, packaging, and functional performance for various resistor models in different package sizes. The resistors offer stability at high temperatures, compatibility with lead-free soldering processes, and are AEC-Q200 qualified. Electrical specifications include resistance range, tolerance, temperature coefficient, and power ratings. Functional performance charts provide information on maximum pulse loads and voltages.
8443-6.5 3M Silicone Rubber Cold Shrink Insulators
3M Silicone Cold Shrink Tubes - LSF Low Smoke Zero Halogen for Low Voltage Cable Splices, Cable Repair & Insulation Protection
3M 8443-6.5 Silicone Rubber Cold Shrink Tubes
Minimum diameter seal 8.86mm
Maximum diameter seal 14.22mm
Cold shrink tube length 132mm
*No tools or heat shrink gas torches required for installation of 3M cold shrink
*Seals tight, retains resilience and pressure even after aging and exposure
*Moisture resistant 3M silicone cold shrink
*Cold shrink resists acids and alkalies
*Resists ozone and UV ultraviolet light
*Fire resistant 3M silicone cold shrink tubings
3M Silicone Cold Shrink Applications
Primary electrical insulation of insulated wires and cable splices up to 1000 volts, insulation of electrical aircraft cables, suitable for indoor and outdoor applications, moisture sealing for high voltage (HV) air insulated cable connectors and cable lugs, insulation of secondary splices (copper and aluminium conductors), cable sheath repairs, insulation of line conductor transition connectors.
Flammability Testing of 3M Silicone Cold Shrink
3M Cold Shrink Insulators 8440 Series flammability testing was conducted with specimens positioned both vertically and horizontally per specification BSS 7230. The 3M silicone rubber cold shrink insulation passed the Flammability Test of BSS 7230 without supporting a flame. In addition, these cold shrink insulators were also subjected to a gas flame test as outlined in paragraph 4.4.15 of MIL-C-24643A and met the passing criteria as specified - no fuse was blown during the one hour flame exposure of the 3M Silicone Cold Shrink Tube.
8445-7.5 3M Silicone Rubber Cold Shrink Insulators
This document provides a summary of 3M's 8440 Series silicone rubber cold shrink connector insulators. It describes the product as open-ended, tubular sleeves that are factory expanded and shrink to form a tight seal when installed. The document lists the product's key features such as simple installation without tools or heat, resistance to moisture and chemicals, and operating temperature range. It also provides application examples, specifications, test data on performance properties, and product availability information.
8443-2 3M Silicone Rubber Cold Shrink Insulators
This document provides a summary of 3M's 8440 Series silicone rubber cold shrink connector insulators. It describes the product as open-ended, tubular sleeves that are factory expanded and shrink to form a tight seal when installed. The document lists the product's key features such as being simple to install without tools or heat, resisting moisture and chemicals, and having an operating temperature range of -55°C to 260°C. It also provides application examples, specifications, test data on performance properties, and ordering information.
8447-3.2 3M Silicone Rubber Cold Shrink Insulators
3M Silicone Cold Shrink Tubes - LSF Low Smoke Zero Halogen for Low Voltage Cable Splices, Cable Repair & Insulation Protection
3M 8447-3.2 Silicone Rubber Cold Shrink Tubes
Minimum diameter seal 14mm
Maximum diameter seal 24.13mm
Cold shrink tube length 57mm
No tools or heat shrink gas torches required for installation of 3M cold shrink
Seals tight, retains resilience and pressure even after aging and exposure
Moisture resistant 3M silicone cold shrink
Cold shrink resists acids and alkalies
Resists ozone and UV ultraviolet light
Fire resistant 3M silicone cold shrink tubings
3M Silicone Cold Shrink Applications
Primary electrical insulation of insulated wires and cable splices up to 1000 volts, insulation of electrical aircraft cables, suitable for indoor and outdoor applications, moisture sealing for high voltage (HV) air insulated cable connectors and cable lugs, insulation of secondary splices (copper and aluminium conductors), cable sheath repairs, insulation of line conductor transition connectors.
Flammability Testing of 3M Silicone Cold Shrink
3M Cold Shrink Insulators 8440 Series flammability testing was conducted with specimens positioned both vertically and horizontally per specification BSS 7230. The 3M silicone rubber cold shrink insulation passed the Flammability Test of BSS 7230 without supporting a flame. In addition, these cold shrink insulators were also subjected to a gas flame test as outlined in paragraph 4.4.15 of MIL-C-24643A and met the passing criteria as specified - no fuse was blown during the one hour flame exposure of the 3M Silicone Cold Shrink Tube
8445-2.5 3M Silicone Rubber Cold Shrink Insulators
3M Silicone Cold Shrink Tubes - LSF Low Smoke Zero Halogen for Low Voltage Cable Splices, Cable Repair & Insulation Protection
3M 8445-2.5 Silicone Rubber Cold Shrink Tubes
Minimum diameter seal 10.7mm
Maximum diameter seal 18.29mm
Cold shrink tube length 43mm
*No tools or heat shrink gas torches required for installation of 3M cold shrink
*Seals tight, retains resilience and pressure even after aging and exposure
*Moisture resistant 3M silicone cold shrink
*Cold shrink resists acids and alkalies
*Resists ozone and UV ultraviolet light
*Fire resistant 3M silicone cold shrink tubings
3M Silicone Cold Shrink Applications
Primary electrical insulation of insulated wires and cable splices up to 1000 volts, insulation of electrical aircraft cables, suitable for indoor and outdoor applications, moisture sealing for high voltage (HV) air insulated cable connectors and cable lugs, insulation of secondary splices (copper and aluminium conductors), cable sheath repairs, insulation of line conductor transition connectors.
Flammability Testing of 3M Silicone Cold Shrink
3M Cold Shrink Insulators 8440 Series flammability testing was conducted with specimens positioned both vertically and horizontally per specification BSS 7230. The 3M silicone rubber cold shrink insulation passed the Flammability Test of BSS 7230 without supporting a flame. In addition, these cold shrink insulators were also subjected to a gas flame test as outlined in paragraph 4.4.15 of MIL-C-24643A and met the passing criteria as specified - no fuse was blown during the one hour flame exposure of the 3M Silicone Cold Shrink Tube.
8447-8 3M Silicone Rubber Cold Shrink Insulators
3M Silicone Cold Shrink Tubes - LSF Low Smoke Zero Halogen for Low Voltage Cable Splices, Cable Repair & Insulation Protection
3M 8447-8 Silicone Rubber Cold Shrink Tubes
Minimum diameter seal 14mm
Maximum diameter seal 24.13mm
Cold shrink tube length 172mm
No tools or heat shrink gas torches required for installation of 3M cold shrink
Seals tight, retains resilience and pressure even after aging and exposure
Moisture resistant 3M silicone cold shrink
Cold shrink resists acids and alkalies
*Resists ozone and UV ultraviolet light
Fire resistant 3M silicone cold shrink tubings
3M Silicone Cold Shrink Applications
Primary electrical insulation of insulated wires and cable splices up to 1000 volts, insulation of electrical aircraft cables, suitable for indoor and outdoor applications, moisture sealing for high voltage (HV) air insulated cable connectors and cable lugs, insulation of secondary splices (copper and aluminium conductors), cable sheath repairs, insulation of line conductor transition connectors.
Flammability Testing of 3M Silicone Cold Shrink
3M Cold Shrink Insulators 8440 Series flammability testing was conducted with specimens positioned both vertically and horizontally per specification BSS 7230. The 3M silicone rubber cold shrink insulation passed the Flammability Test of BSS 7230 without supporting a flame. In addition, these cold shrink insulators were also subjected to a gas flame test as outlined in paragraph 4.4.15 of MIL-C-24643A and met the passing criteria as specified - no fuse was blown during the one hour flame exposure of the 3M Silicone Cold Shrink Tube
Heat Shrink - Commercial Non Flame Retarded Polyolefin - SPN 1.2mm
This document provides specification and ordering information for a non flame-retarded heat shrinkable polyolefin tubing. It lists the product references, commercial grade classification, and test method values for properties like tensile strength, elongation, specific gravity, flammability, corrosion resistance, and water absorption. A table is included that shows the minimum/maximum sizes, wall thicknesses, and standard reel lengths available. Standard colors and packaging are also specified along with ordering instructions and product details like the shrink ratio, temperature range, and shrink temperature.
BHUSHAN STEEL.pdf BROCHURE FOR STEEL TABLE
This document provides information about the manufacturing process for steel tubes at Bhushan Power and Steel Ltd. It begins with an overview of the company and its products. It then describes the tube manufacturing process which involves forming steel strips into tubular shapes and welding the edges. Various quality tests are conducted including hydraulic testing. Tubes may also be galvanized and threaded. Standards that the company's tubes conform to from various countries are listed. Details on specific tube types including dimensions, tolerances and material properties are provided.
Hydra Solid Carbide Replaceable Head Drills
Dormer Interchangeable solid carbide head drills for high performance machining of steels, stainless steels and cast iron. Proven in drilling structural steel beams used in the construction industry. One of the most reliably accurate interchangeable head drills available. Fail-safe head location can be changed without ejecting the drill from the machine. Available with coolant feed across the full range and a choice of HSS bodies to support drilling to 3xD, 5xD and 8xD
J-FLEX® Hydraulic Hose Solutions
JGB Enterprises, Inc. carries Hydraulic Hose in the sizes, lengths & vacuum ratings for any low to high-pressure apparatus. Most of our Hydraulic Hoses come with a choice of covers depending on usage conditions. Along with our bulk hose, JGB custom assembles Hydraulic Hose in many variations. We also carry hydraulic Fittings, Adapters, and Couplers to work with any type of hydraulic systems with any pressure rating requirements. JGB can provide low pressure hose to ultra-high pressure hydraulic hose for arduous operating conditions needing extremely high flexibility.
Thermobreak Tube - Brochure 230914 D
This document describes a preformed closed cell physically crosslinked polyolefin foam tube insulation with reinforced foil facing for steel and copper pipes. It provides premium performance pipe insulation with lower installation costs and maximum energy savings. The product is a completely closed cell, physically crosslinked foam pipe insulation with heat bonded factory applied reinforced aluminium foil facing that is pre-slit for faster installation. It has excellent insulating properties, compression resistance, and vapour diffusion resistance.
Specialty Polymers for Drivetrain Systems
This document discusses how specialty polymers from Solvay can be used in drivetrain systems to replace metal components. These high-performance plastics offer benefits like lighter weight, lower manufacturing costs, noise dampening, and resistance to abrasion, corrosion and high temperatures. The polymers discussed include Torlon PAI, KetaSpire PEEK, AvaSpire PAEK and Amodel PPA. These polymers are suitable for a variety of drivetrain components and can improve fuel efficiency while reducing costs compared to metal parts. Tables provide properties and application recommendations for different polymer grades.
Similar to Product+overview vibrafoam e (20)
How do Anti-Friction Coatings based on Binder Systems eliminate noise in auto...
How do Anti-Friction Coatings based on Binder Systems eliminate noise in auto...
8443-6.5 3M Silicone Rubber Cold Shrink Insulators
8443-6.5 3M Silicone Rubber Cold Shrink Insulators
8445-7.5 3M Silicone Rubber Cold Shrink Insulators
8445-7.5 3M Silicone Rubber Cold Shrink Insulators
8447-3.2 3M Silicone Rubber Cold Shrink Insulators
8447-3.2 3M Silicone Rubber Cold Shrink Insulators
8445-2.5 3M Silicone Rubber Cold Shrink Insulators
8445-2.5 3M Silicone Rubber Cold Shrink Insulators
Heat Shrink - Commercial Non Flame Retarded Polyolefin - SPN 1.2mm
Heat Shrink - Commercial Non Flame Retarded Polyolefin - SPN 1.2mm
More from Gary Philipson
Presentation1
Carefully positioned bespoke acoustic fabric and timber panels can reduce noise and reverberation, helping children focus in the classroom. The panels absorb sound to treat reverberation issues, quieting noisy environments like offices and classrooms. Customers can choose from a wide range of acoustic products with an innovative track system for attaching wall-to-wall or ceiling panels made from any fabric, including leather, with replaceable fabric and reduced seams for a seamless installation.
Recent installations
Recent installations include soundproofing seven sound studios with acoustic panels, installing acoustic fabric panels at UWL in multiple rooms, creating digital print fabric, soundproofing for the film Get Carter, learning how to tuck acoustic fabric, setting and finishing acoustic panels, and installing track and fabric at the BBC to create finished acoustic panels.
Product+overview Vibrafoam e
Vibrafoam provides effective protection against vibration and shock. This High-tech polyurethane elastomer can be used as two-dimensional matting for decoupling components, as a blank according to the respective component geometry or as custom-made molding. We offer a wide range of 13 standard materials and also offer the possibility to produce special types in various colours and thicknesses to suit your requirements
Inspira-Sorb Acoustic Raft
The document describes iNSpira-Sorb Acoustic Raft panels, which are frameless acoustic panels that absorb sound from both the front and back surfaces. They are available in a variety of shapes, sizes, and fabric colors. Installation is quick and easy using hanging kits that include spiral hooks, cables, and eyelet hooks to suspend the panels from ceilings or soffits. The panels provide acoustic treatment without compromising on aesthetic appeal.
Inspira-Sorb Acoustic Panels
The document summarizes iNSpira-Sorb, a high-quality sound absorbing panel system designed to control reverberant noise. It offers over 100 standard fabric colors and performs well on acoustic absorption while also decorating interior spaces. The panels are available in standard and custom sizes and thicknesses, and install easily using adhesive and clips.
Stretched fabric acoustic panels case studies
The document lists two recent installations: the University of Nottingham and the Church of Good Shepherd in Woking. No other details are provided about the nature or purpose of the installations at these two locations.
Stretched fabric acoustic panels case studies
The document lists two recent installations: the University of Nottingham and the Church of Good Shepherd in Woking. No other details are provided about the nature or purpose of the installations at these two locations.
Stretched fabric acoustic panels
Timber acoustic panels are available in a square low leg profile for typical wall layouts. The panels can be installed with either a 25mm square joint, 12mm bevelled joint, or 12mm square joint to reduce sound transmission between walls.
More from Gary Philipson (8)
Recently uploaded
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
this notes have been created
by Eric36 at nyamata ttc
after readings
pe book for y2sme .
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, Serbia学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Recently uploaded (20)
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
Product+overview vibrafoam e
- 1. specificload[N/mm²] PURASYS vibrafoam type 0,001 SD 10 SD 16 SD 26 SD 40 SD 65 SD 110 SD 170 SD 260 SD 400 SD 650 SD 950 SD 1300 SD 1900 0,01 0,1 1 10 KRAIBURG PuraSys GmbH & Co. KG Porschestraße 1 49356 Diepholz www.purasys.com Product overview vibrafoamP U R A S Y S © KRAIBURG PuraSys GmbH & Co. KG Release 1.0 of 01.04.2016 page 1 of 1 PURASYS vibrafoam series Working range Material mixed cellular polyether-urethane Characteristic Delivery specifications Thickness: 12.5 mm and 25 mm Mats: 0.5 m wide, 2.0 m long Stripes: max. 2.0 m long Other dimensions on request (also stamping parts, moulded parts). spring damper Properties Test method Colour red pink orange yellow bright green green dark green petrol blue dark blue dark violet violet bordeaux red Static loads [N/mm2 ] (1) 0.010 0.016 0.026 0.040 0.065 0.110 0.170 0.260 0.400 0.650 0.950 1.300 1.900 Dynamic loads [N/mm2 ] (1) 0.016 0.026 0.040 0.065 0.110 0.170 0.260 0.400 0.650 0.950 1.450 2.000 2.800 Load peaks [N/mm2 ] (1) 0.5 0.7 1.0 2.0 2.5 3.0 3.5 4.0 4.5 5.5 6.0 6.5 7.0 Mechanical loss factor (2) 0.25 0.24 0.22 0.15 0.18 0.12 0.13 0.11 0.10 0.10 0.10 0.09 0.09 DIN 53513 (3) Static E-modulus [N/mm2 ] (2) 0.048 0.111 0.129 0.316 0.453 0.861 0.931 1.64 2.72 4.57 8.16 12.0 20.4 DIN 53513 (3) Dynamic E-modulus [N/mm2 ] (2) 0.144 0.328 0.443 0.743 1.06 1.86 2.27 3.63 5.27 10.4 21.5 35.2 78.2 DIN 53513 (3) Resistancetostrainat10%deformation[N/mm2 ] 0.011 0.018 0.026 0.046 0.073 0.130 0.170 0.270 0.370 0.590 0.930 1.340 1.840 Residual compression set [%] < 5 < 5 < 5 < 5 < 5 < 5 < 5 < 5 < 6 < 7 < 9 < 9 < 8 DIN ISO 1856 Tensile strength [N/mm2 ] > 0.35 > 0.40 > 0.45 > 0.55 > 0.70 > 0.95 > 1.25 > 1.65 > 2.25 > 3.00 > 3.80 > 4.40 > 5.00 DIN 53455-6-4 Elongation at break [%] > 400 > 400 > 400 > 400 > 400 > 400 > 400 > 400 > 400 > 400 > 400 > 400 > 400 DIN 53455-6-4 Rebound elasticity [%] 50 50 50 50 50 50 50 50 50 50 50 50 50 DIN EN ISO 8307 Specific volume resistance [Ω⋅cm] > 1012 > 1012 > 1011 > 1011 > 1011 > 1011 > 1011 > 1011 > 1011 > 1011 > 1011 > 1011 > 1011 DIN IEC 93 Thermal conductivity [W/m⋅K] 0.05 0.05 0.06 0.07 0.07 0.08 0,08 0.08 0.10 0.10 0.11 0.11 0.11 DIN 52612-1 Operating temperature [°C] - 30 to + 70 Temperature peak [°C] + 120 Inflammability Class E / EN 13501-1 EN ISO 11925-1 (1) Values apply to shape factor q = 3 (2) Measured at maximum limit of static application range (3) Test according to respective standards All information and data is based on our current knowledge. The data are subject to typical manufacturing tolerances and are not guaranteed. We reserve the right to amend the data. SD 10 SD 16 SD 26 SD 40 SD 65 SD 110 SD 170 SD 260 SD 400 SD 650 SD 950 SD 1300 SD 1900