Printing of wool, avikanagar 29.9.03
•
0 likes•572 views
The document discusses the process of printing wool fabrics. It covers wool preparation including scouring and chlorination/oxidative processes. It then discusses the printing process including recipes, steaming, washing, and types of dyes used like reactive, acid, and metal complex dyes. It also covers discharge printing where a reducing agent is used to remove dye from pre-dyed areas and leave behind a color discharge print.
Report
Share
Report
Share
![INTRODUCTION ,[object Object],[object Object],[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Wet processing-I
This document contains information about Shuvo Brahma, a lecturer at BUTEX. It includes his contact details, education background of BSc and ongoing MSc from BUTEX, and previous job experience at Epyllion Knitex Ltd and as a lecturer at NITER.
It also includes the syllabus for the course WPE 243 Wet Processing-1 which covers topics like water and its importance in textile processing, detergents and auxiliaries, and pretreatment.
Finally, it discusses water treatment processes in the textile industry, including different water sources, hardness types, units of hardness measurement, effects of hardness on textile processing, and problems associated with hard water like scale formation in
Development in finishing power point
The document discusses developments in eco-friendly finishes for cotton fabrics and garments. It outlines how conventional cotton cultivation and processing can be polluting, but identifies organic, natural and eco-friendly cottons. It also discusses polycarboxylic acids as promising eco-friendly alternatives to formaldehyde-based cross-linking agents for wrinkle-free finishes, though they are currently more expensive. The use of combinations of polycarboxylic acids may help reduce costs and environmental impacts in the future.
Lecture 6 b dyeing cotton with sulphur dyes
Sulfur dyes are prepared by reacting phenols, amines, or nitro compounds with sulfur and caustic soda under heat. They contain sulfur-sulfur bonds that make them insoluble in water but soluble in the presence of sodium sulfide and soda ash. Sulfur dyes are cheap and easy to apply to cotton, with good wet and light fastness. However, the exact chemical structures of sulfur dyes are unknown and they have poor fastness to chlorine.
Dyeing of cotton with vat dyes
This document summarizes the key properties and processes involved in dyeing cotton with vat dyes. Vat dyes are insoluble in water but can be converted to a water-soluble form through a process called vatting, which involves reducing the dye and forming a salt. The water-soluble form dyes cotton fibers, and is then re-oxidized inside the fibers. The dyeing process involves steps of reduction, dyeing, oxidation, and soaping to achieve bright shades and fastness properties.
Lecture 6 dyeing of cotton with vat and sulphur dyes
The document discusses the dyeing of cotton with vat dyes. It describes the general properties of vat dyes, including being insoluble in water and requiring reduction to a water-soluble form prior to dyeing. The document outlines the four main steps of vat dyeing cotton: reduction of the insoluble dye to soluble form, dyeing the cotton, oxidizing the dye inside the fiber, and soaping for brightness and fastness. It provides details on exhaust and continuous/semi-continuous dyeing methods.
importence of soft water in textile industry
soft water is the life line of textile wet processing as well as textile industry for better production quality
Water parameters for textile indusdtry
This document discusses important parameters for water quality used in textile wet processing. It outlines the major water consuming processes in textile industry such as bleaching, dyeing, and printing. The desirable water quality parameters for textile wet processing are listed, including pH between 6.5-7.5, TDS of 300 ppm or less, total hardness of 30 ppm or less. Using hard or unsuitable water can cause defects like shade variation and damage textiles due to precipitation of dyes or metal ions.
Final poster
1) The document discusses the removal of red acid dye from textile industry wastewater using bagasse treated with different surfactants extracted from plants and microbes.
2) Three surfactants - A10, R10 and P21 - were extracted and used to treat bagasse. The treated bagasses - BA10, BR10 and BP21 - were tested for dye removal efficiency.
3) BA10 showed the highest dye removal of 99.4% at pH 7, while BR10 and BP21 achieved 98.1% and 98% removal respectively. BA10 also had the fastest degradation within a short time period compared to the other treatments.
Recommended
Wet processing-I
This document contains information about Shuvo Brahma, a lecturer at BUTEX. It includes his contact details, education background of BSc and ongoing MSc from BUTEX, and previous job experience at Epyllion Knitex Ltd and as a lecturer at NITER.
It also includes the syllabus for the course WPE 243 Wet Processing-1 which covers topics like water and its importance in textile processing, detergents and auxiliaries, and pretreatment.
Finally, it discusses water treatment processes in the textile industry, including different water sources, hardness types, units of hardness measurement, effects of hardness on textile processing, and problems associated with hard water like scale formation in
Development in finishing power point
The document discusses developments in eco-friendly finishes for cotton fabrics and garments. It outlines how conventional cotton cultivation and processing can be polluting, but identifies organic, natural and eco-friendly cottons. It also discusses polycarboxylic acids as promising eco-friendly alternatives to formaldehyde-based cross-linking agents for wrinkle-free finishes, though they are currently more expensive. The use of combinations of polycarboxylic acids may help reduce costs and environmental impacts in the future.
Lecture 6 b dyeing cotton with sulphur dyes
Sulfur dyes are prepared by reacting phenols, amines, or nitro compounds with sulfur and caustic soda under heat. They contain sulfur-sulfur bonds that make them insoluble in water but soluble in the presence of sodium sulfide and soda ash. Sulfur dyes are cheap and easy to apply to cotton, with good wet and light fastness. However, the exact chemical structures of sulfur dyes are unknown and they have poor fastness to chlorine.
Dyeing of cotton with vat dyes
This document summarizes the key properties and processes involved in dyeing cotton with vat dyes. Vat dyes are insoluble in water but can be converted to a water-soluble form through a process called vatting, which involves reducing the dye and forming a salt. The water-soluble form dyes cotton fibers, and is then re-oxidized inside the fibers. The dyeing process involves steps of reduction, dyeing, oxidation, and soaping to achieve bright shades and fastness properties.
Lecture 6 dyeing of cotton with vat and sulphur dyes
The document discusses the dyeing of cotton with vat dyes. It describes the general properties of vat dyes, including being insoluble in water and requiring reduction to a water-soluble form prior to dyeing. The document outlines the four main steps of vat dyeing cotton: reduction of the insoluble dye to soluble form, dyeing the cotton, oxidizing the dye inside the fiber, and soaping for brightness and fastness. It provides details on exhaust and continuous/semi-continuous dyeing methods.
importence of soft water in textile industry
soft water is the life line of textile wet processing as well as textile industry for better production quality
Water parameters for textile indusdtry
This document discusses important parameters for water quality used in textile wet processing. It outlines the major water consuming processes in textile industry such as bleaching, dyeing, and printing. The desirable water quality parameters for textile wet processing are listed, including pH between 6.5-7.5, TDS of 300 ppm or less, total hardness of 30 ppm or less. Using hard or unsuitable water can cause defects like shade variation and damage textiles due to precipitation of dyes or metal ions.
Final poster
1) The document discusses the removal of red acid dye from textile industry wastewater using bagasse treated with different surfactants extracted from plants and microbes.
2) Three surfactants - A10, R10 and P21 - were extracted and used to treat bagasse. The treated bagasses - BA10, BR10 and BP21 - were tested for dye removal efficiency.
3) BA10 showed the highest dye removal of 99.4% at pH 7, while BR10 and BP21 achieved 98.1% and 98% removal respectively. BA10 also had the fastest degradation within a short time period compared to the other treatments.
tannery industry
tannery industry is the industry where leather is manufactured from the skins of animals . the whole process and the way it affects the water and their treatment has been mentioned in this ppt.
Tannery waste
The document discusses tannery waste from the leather production process. It describes the various steps of soaking, fleshing, liming, unhairing, and tanning (either vegetable or chrome tanning). These steps produce solid and liquid wastes. Solid wastes include hair, trimmings, sludge, and fleshings which can be used for other purposes. Liquid waste is produced during soaking, liming, bating, tanning, bleaching and dyeing. This waste water has a very high total dissolved solids content and requires proper disposal, such as irrigation, municipal sewers, or evaporation ponds to recover salt.
Leather Tanning Industry And their Waste Management
The document discusses the leather tanning industry and the significant waste it generates. It notes that while leather products have become more popular, the tanning process produces large amounts of solid and liquid waste. Tanning waste contains hazardous chemicals if released untreated and can pollute water sources and harm the environment. The document also examines the health and environmental impacts of pollution from India's leather tanning industry on the Ganges River. It concludes by discussing the high costs of compliance with environmental regulations for developing countries' leather industries.
PROJECT - PART 2
This document provides information on dyeing fabrics with vat dyes, including recipes for different dye concentrations and oxidation methods. It examines the color fastness of knit and woven cotton samples dyed with 1% or 2% vat dye to washing, water, rubbing, and light using various oxidizing agents like hydrogen peroxide, sodium perborate, and potassium dichromate. Test results show color fastness ratings mostly between 3-5. The document also analyzes the costs and risks of different oxidation methods and discusses common industrial practices for improving color fastness through air oxidation and surface coatings.
Oxygen scavenger presentation
The document discusses oxygen scavengers, their uses, and safety precautions. It describes two common oxygen scavengers - sodium sulfite and hydrazine. Sodium sulfite is effective at removing oxygen below 600 PSIG but contributes to total dissolved solids. Hydrazine can remove small amounts of oxygen without affecting water chemistry. However, hydrazine is highly toxic, flammable, and decomposes above 270°C, producing ammonia. The document outlines safety equipment needed for handling hydrazine due to its toxicity and lists potential carcinogenic and organ-damaging effects. Carbohydrazide is proposed as a safer alternative oxygen scavenger.
Unit 3- Pollution and treatment of tanner and efflunt
The document discusses various finishing processes used in tanneries. It describes drying, bleaching, dyeing, fat liquoring, and calendering processes. It also discusses pollution caused by tanneries and describes primary, secondary, and tertiary wastewater treatment methods used, including mechanical screening, sedimentation, coagulation, filtration, and biological treatments to reduce BOD and COD levels before discharge.
L tannery industry
Lecture notes of Industrial Waste Treatment (Elective -III) as per syllabus of Solapur university for BE Civil
Prepared by
Prof S S Jahagirdar,
Associate Professor,
N K ORchid College of Engg and Tech,
Solapur
Printing of wool, avikanagar 29.9.03
The document discusses the process of printing wool fabrics. It covers wool preparation including scouring and chlorination. It then discusses the printing process including recipes, dyes used like reactive and discharging dyes, and machines. Key steps are chlorination to prepare the wool, applying print pastes containing dyes and chemicals, and steaming to fix the dyes onto the wool fibers. Considerations for washing and achieving colorfastness are also covered.
How to Kill Black Mold without Killing the Environment * www.howtoremoveblack...
How to Kill Black Mold without Killing the Environment. The average homeowner has many items in their household that are non-toxic and can be used to effectively diminish and get rid of mold and mildew in their kitchen, bathroom and much more. Items such as borax, vinegar, and tea tree oil are easier on the environment and your lungs to get rid of mold in many places of your home.
Environment issues in scouring of wool
The document discusses various environmental issues related to wool scouring. It notes that raw wool contains residues from pesticides used on sheep that can pollute waterways if discharged in effluent. It also discusses how different pesticides associate with grease or dirt and are removed to varying degrees during scouring. Land pollution may occur from disposal of grease and sludge by-products. Air pollution can potentially arise from incineration of waste or use of organic solvents during scouring. Overall, proper treatment of effluent and disposal of by-products is necessary to minimize environmental impacts.
SB-Fuzion2a
The document discusses a new disinfectant cleaner called Clorox Healthcare Fuzion Cleaner Disinfectant that is effective at killing pathogens like Clostridium difficile spores. It combines sodium hypochlorite and a neutralizer that form hypochlorous acid to kill microorganisms quickly without leaving residues or odors. Fuzion can be used throughout healthcare facilities to disinfect surfaces and reduces the spread of infections, helping to improve patient safety.
Tanning industry waste
Tanning is the process of converting animal hides and skins into leather through chemical treatments. This document describes the tanning process and the tannery industry in Bangalore, India. It discusses the types of chemicals used in tanning, the characteristics of tannery wastewater, and the treatment methods used, including physical separation processes, chemical coagulation and flocculation, sedimentation, biological treatments, and sludge management. The major tannery area in Bangalore is located on Tannery Road, which has around 700 leather shops.
tannery industry operation, process and treatment
This document discusses the tannery industry and tannery effluent treatment. It describes the tanning process that converts raw hides into stable leather. It outlines the various preparatory and tanning stages including soaking, liming, unhairing, and pickling. It then analyzes the characteristics of tannery effluent, such as high levels of BOD, solids, salts, oils, and chromium. Finally, it discusses common treatment methods for removing solids, biodegradable organics, oils, and chromium from effluent through processes like sedimentation, filtration, and adsorption. The key challenges are high salinity levels after treatment and cost-effective sludge disposal or utilization
Lecture 11 organic and naturally coloured cotton
The document discusses eco-friendly textiles and fibres. It talks about how conventional cotton cultivation uses fertilizers and pesticides that harm the environment and human health. It promotes using organic cotton produced without chemicals, and growing fibres like naturally coloured cotton. It outlines the three ecologies of production, use and disposal and standards for identifying truly eco-friendly products.
Lecture 1 indian textile industry
The Indian textile industry occupies an important position in the Indian economy, accounting for 14% of industrial production and employing over 35 million people. The industry encompasses traditional handloom and mill sectors as well as decentralized powerloom and knitting sectors. Cotton accounts for 70% of total textile production. While the industry faces challenges like fragmentation and technology obsolescence, it also has opportunities to capitalize on growing domestic demand, develop new products, and improve design capabilities to increase its share of the global textile market. Stakeholders must work to enhance competitiveness and prepare for increased social and environmental standards.
Lecture 6 dyeing of cotton with vat and sulphur dyes
The document discusses the dyeing of cotton with vat dyes. It describes the general properties of vat dyes, including being insoluble in water and requiring reduction to a water-soluble form prior to dyeing. The document outlines the four main steps of vat dyeing cotton: reduction of the dye, dyeing the cotton, oxidizing the dye inside the fiber, and soaping for brightness and fastness. It also discusses exhaust dyeing and semi-continuous/continuous vat dyeing methods.
Lecture 8 digital printing of textiles
This document summarizes digital printing of textiles using inkjet technology. It discusses how digital printing works by transferring a design file digitally to an inkjet printer, without the need for screens or plates. The key steps involve designing a pattern digitally, scanning it, transferring the data to an inkjet printer using software, and printing directly onto fabric without contact. It also describes different inkjet technologies like thermal and piezo drop-on-demand printing, and considerations for ink formulations and pretreating fabrics for digital printing.
Social accountibility standards
The SA 8000 standard establishes principles for decent working conditions related to issues like child labor, minimum wages, health and safety, discrimination and more. It aims to demonstrate business operations are not based on "sweatshop" conditions. Companies can obtain SA 8000 certification by implementing the standard's requirements and undergoing an audit process to verify compliance. This helps companies prove their social accountability and ethical sourcing to international buyers requiring such standards.
Kvic presentatio nnew 19.12.02
The document discusses the textile industry in India and proposes suggestions to modernize the khadi sector. It recommends setting up a model processing unit at Gandhi Ashram in Barabanki with facilities for fabric processing, garment finishing and stitching. It also suggests constituting a national expert committee to develop a long-term technology-oriented action plan to make the khadi sector more competitive.
Printing of wool, avikanagar 29.9.03
The document discusses the process of printing wool fabrics. It covers wool preparation including scouring and chlorination. It then discusses the printing process including recipes, dyes used like reactive and discharging dyes, and machines. Printing involves applying a paste to the fabric using screens followed by steaming to fix the dyes. Discharge printing removes dye from pre-dyed areas. Proper preparation, dye selection, and washing are important for quality prints.
Lecture 11 organic and naturally coloured cotton
The document discusses eco-friendly textiles and fibres. It talks about how conventional cotton cultivation uses fertilizers and pesticides that harm the environment and human health. It promotes using organic cotton which is grown without chemicals. It also discusses other natural fibres and ensuring sustainable production, use and disposal of textiles to reduce environmental impact.
Environment friendly dyeing processes for cotton ppt
The document discusses various environmentally friendly dyeing processes for cotton textiles. It focuses on using bifunctional reactive dyes that have high fixation rates and reduce dye concentrations in effluents. Low salt reactive dyes and glucose are proposed as alternatives to reduce salt levels in effluents from reactive and sulfur dyeing respectively. Iron complexes and electrochemical reduction methods are suggested to replace sodium hydrosulfite in vat dyeing. The aim is to make dyeing more sustainable by minimizing pollution from dye effluents.
More Related Content
What's hot
tannery industry
tannery industry is the industry where leather is manufactured from the skins of animals . the whole process and the way it affects the water and their treatment has been mentioned in this ppt.
Tannery waste
The document discusses tannery waste from the leather production process. It describes the various steps of soaking, fleshing, liming, unhairing, and tanning (either vegetable or chrome tanning). These steps produce solid and liquid wastes. Solid wastes include hair, trimmings, sludge, and fleshings which can be used for other purposes. Liquid waste is produced during soaking, liming, bating, tanning, bleaching and dyeing. This waste water has a very high total dissolved solids content and requires proper disposal, such as irrigation, municipal sewers, or evaporation ponds to recover salt.
Leather Tanning Industry And their Waste Management
The document discusses the leather tanning industry and the significant waste it generates. It notes that while leather products have become more popular, the tanning process produces large amounts of solid and liquid waste. Tanning waste contains hazardous chemicals if released untreated and can pollute water sources and harm the environment. The document also examines the health and environmental impacts of pollution from India's leather tanning industry on the Ganges River. It concludes by discussing the high costs of compliance with environmental regulations for developing countries' leather industries.
PROJECT - PART 2
This document provides information on dyeing fabrics with vat dyes, including recipes for different dye concentrations and oxidation methods. It examines the color fastness of knit and woven cotton samples dyed with 1% or 2% vat dye to washing, water, rubbing, and light using various oxidizing agents like hydrogen peroxide, sodium perborate, and potassium dichromate. Test results show color fastness ratings mostly between 3-5. The document also analyzes the costs and risks of different oxidation methods and discusses common industrial practices for improving color fastness through air oxidation and surface coatings.
Oxygen scavenger presentation
The document discusses oxygen scavengers, their uses, and safety precautions. It describes two common oxygen scavengers - sodium sulfite and hydrazine. Sodium sulfite is effective at removing oxygen below 600 PSIG but contributes to total dissolved solids. Hydrazine can remove small amounts of oxygen without affecting water chemistry. However, hydrazine is highly toxic, flammable, and decomposes above 270°C, producing ammonia. The document outlines safety equipment needed for handling hydrazine due to its toxicity and lists potential carcinogenic and organ-damaging effects. Carbohydrazide is proposed as a safer alternative oxygen scavenger.
Unit 3- Pollution and treatment of tanner and efflunt
The document discusses various finishing processes used in tanneries. It describes drying, bleaching, dyeing, fat liquoring, and calendering processes. It also discusses pollution caused by tanneries and describes primary, secondary, and tertiary wastewater treatment methods used, including mechanical screening, sedimentation, coagulation, filtration, and biological treatments to reduce BOD and COD levels before discharge.
L tannery industry
Lecture notes of Industrial Waste Treatment (Elective -III) as per syllabus of Solapur university for BE Civil
Prepared by
Prof S S Jahagirdar,
Associate Professor,
N K ORchid College of Engg and Tech,
Solapur
Printing of wool, avikanagar 29.9.03
The document discusses the process of printing wool fabrics. It covers wool preparation including scouring and chlorination. It then discusses the printing process including recipes, dyes used like reactive and discharging dyes, and machines. Key steps are chlorination to prepare the wool, applying print pastes containing dyes and chemicals, and steaming to fix the dyes onto the wool fibers. Considerations for washing and achieving colorfastness are also covered.
How to Kill Black Mold without Killing the Environment * www.howtoremoveblack...
How to Kill Black Mold without Killing the Environment. The average homeowner has many items in their household that are non-toxic and can be used to effectively diminish and get rid of mold and mildew in their kitchen, bathroom and much more. Items such as borax, vinegar, and tea tree oil are easier on the environment and your lungs to get rid of mold in many places of your home.
Environment issues in scouring of wool
The document discusses various environmental issues related to wool scouring. It notes that raw wool contains residues from pesticides used on sheep that can pollute waterways if discharged in effluent. It also discusses how different pesticides associate with grease or dirt and are removed to varying degrees during scouring. Land pollution may occur from disposal of grease and sludge by-products. Air pollution can potentially arise from incineration of waste or use of organic solvents during scouring. Overall, proper treatment of effluent and disposal of by-products is necessary to minimize environmental impacts.
SB-Fuzion2a
The document discusses a new disinfectant cleaner called Clorox Healthcare Fuzion Cleaner Disinfectant that is effective at killing pathogens like Clostridium difficile spores. It combines sodium hypochlorite and a neutralizer that form hypochlorous acid to kill microorganisms quickly without leaving residues or odors. Fuzion can be used throughout healthcare facilities to disinfect surfaces and reduces the spread of infections, helping to improve patient safety.
Tanning industry waste
Tanning is the process of converting animal hides and skins into leather through chemical treatments. This document describes the tanning process and the tannery industry in Bangalore, India. It discusses the types of chemicals used in tanning, the characteristics of tannery wastewater, and the treatment methods used, including physical separation processes, chemical coagulation and flocculation, sedimentation, biological treatments, and sludge management. The major tannery area in Bangalore is located on Tannery Road, which has around 700 leather shops.
tannery industry operation, process and treatment
This document discusses the tannery industry and tannery effluent treatment. It describes the tanning process that converts raw hides into stable leather. It outlines the various preparatory and tanning stages including soaking, liming, unhairing, and pickling. It then analyzes the characteristics of tannery effluent, such as high levels of BOD, solids, salts, oils, and chromium. Finally, it discusses common treatment methods for removing solids, biodegradable organics, oils, and chromium from effluent through processes like sedimentation, filtration, and adsorption. The key challenges are high salinity levels after treatment and cost-effective sludge disposal or utilization
What's hot (13)
Leather Tanning Industry And their Waste Management
Leather Tanning Industry And their Waste Management
Unit 3- Pollution and treatment of tanner and efflunt
Unit 3- Pollution and treatment of tanner and efflunt
How to Kill Black Mold without Killing the Environment * www.howtoremoveblack...
How to Kill Black Mold without Killing the Environment * www.howtoremoveblack...
Viewers also liked
Lecture 11 organic and naturally coloured cotton
The document discusses eco-friendly textiles and fibres. It talks about how conventional cotton cultivation uses fertilizers and pesticides that harm the environment and human health. It promotes using organic cotton produced without chemicals, and growing fibres like naturally coloured cotton. It outlines the three ecologies of production, use and disposal and standards for identifying truly eco-friendly products.
Lecture 1 indian textile industry
The Indian textile industry occupies an important position in the Indian economy, accounting for 14% of industrial production and employing over 35 million people. The industry encompasses traditional handloom and mill sectors as well as decentralized powerloom and knitting sectors. Cotton accounts for 70% of total textile production. While the industry faces challenges like fragmentation and technology obsolescence, it also has opportunities to capitalize on growing domestic demand, develop new products, and improve design capabilities to increase its share of the global textile market. Stakeholders must work to enhance competitiveness and prepare for increased social and environmental standards.
Lecture 6 dyeing of cotton with vat and sulphur dyes
The document discusses the dyeing of cotton with vat dyes. It describes the general properties of vat dyes, including being insoluble in water and requiring reduction to a water-soluble form prior to dyeing. The document outlines the four main steps of vat dyeing cotton: reduction of the dye, dyeing the cotton, oxidizing the dye inside the fiber, and soaping for brightness and fastness. It also discusses exhaust dyeing and semi-continuous/continuous vat dyeing methods.
Lecture 8 digital printing of textiles
This document summarizes digital printing of textiles using inkjet technology. It discusses how digital printing works by transferring a design file digitally to an inkjet printer, without the need for screens or plates. The key steps involve designing a pattern digitally, scanning it, transferring the data to an inkjet printer using software, and printing directly onto fabric without contact. It also describes different inkjet technologies like thermal and piezo drop-on-demand printing, and considerations for ink formulations and pretreating fabrics for digital printing.
Social accountibility standards
The SA 8000 standard establishes principles for decent working conditions related to issues like child labor, minimum wages, health and safety, discrimination and more. It aims to demonstrate business operations are not based on "sweatshop" conditions. Companies can obtain SA 8000 certification by implementing the standard's requirements and undergoing an audit process to verify compliance. This helps companies prove their social accountability and ethical sourcing to international buyers requiring such standards.
Kvic presentatio nnew 19.12.02
The document discusses the textile industry in India and proposes suggestions to modernize the khadi sector. It recommends setting up a model processing unit at Gandhi Ashram in Barabanki with facilities for fabric processing, garment finishing and stitching. It also suggests constituting a national expert committee to develop a long-term technology-oriented action plan to make the khadi sector more competitive.
Printing of wool, avikanagar 29.9.03
The document discusses the process of printing wool fabrics. It covers wool preparation including scouring and chlorination. It then discusses the printing process including recipes, dyes used like reactive and discharging dyes, and machines. Printing involves applying a paste to the fabric using screens followed by steaming to fix the dyes. Discharge printing removes dye from pre-dyed areas. Proper preparation, dye selection, and washing are important for quality prints.
Lecture 11 organic and naturally coloured cotton
The document discusses eco-friendly textiles and fibres. It talks about how conventional cotton cultivation uses fertilizers and pesticides that harm the environment and human health. It promotes using organic cotton which is grown without chemicals. It also discusses other natural fibres and ensuring sustainable production, use and disposal of textiles to reduce environmental impact.
Viewers also liked (8)
Lecture 6 dyeing of cotton with vat and sulphur dyes
Lecture 6 dyeing of cotton with vat and sulphur dyes
Similar to Printing of wool, avikanagar 29.9.03
Environment friendly dyeing processes for cotton ppt
The document discusses various environmentally friendly dyeing processes for cotton textiles. It focuses on using bifunctional reactive dyes that have high fixation rates and reduce dye concentrations in effluents. Low salt reactive dyes and glucose are proposed as alternatives to reduce salt levels in effluents from reactive and sulfur dyeing respectively. Iron complexes and electrochemical reduction methods are suggested to replace sodium hydrosulfite in vat dyeing. The aim is to make dyeing more sustainable by minimizing pollution from dye effluents.
Environment friendly dyeing processes for cotton ppt
The document discusses various environmentally friendly dyeing processes for cotton textiles. It focuses on using bifunctional reactive dyes that have high fixation rates and reduce dye concentrations in effluents. Low salt reactive dyes and glucose are proposed as alternatives to reduce salt levels. Sodium hydrosulphite used in vat dyeing can be replaced by iron complexes or electrochemical reduction to avoid toxic byproducts. Overall, the techniques aim to minimize pollution from textile dyeing while maintaining productivity.
Environment friendly dyeing processes for cotton ppt
The document discusses various environmentally friendly dyeing processes for cotton textiles. It describes using bifunctional reactive dyes that have high fixation rates and reduce dye concentrations in effluents. Low salt reactive dyes and glucose replacements for sodium hydrosulphite and sodium sulphide are also presented as reducing pollution in effluents. Iron complexes and electrochemical reduction methods are discussed as alternatives to hydrosulphite for vat dyeing. The aim is to minimize chemicals in effluents and make dyeing more sustainable.
Environment friendly dyeing processes for cotton ppt
The document discusses various environmentally friendly dyeing processes for cotton textiles. It describes using bifunctional reactive dyes that require lower salt concentrations and have higher dye fixation, reducing salt levels in effluents. Alternatives to sodium hydrosulphite are discussed for vat dyeing, like iron complexes and electrochemical reduction. Glucose can replace sodium sulphide in sulphur dyeing. The goal is reducing pollution from dyeing while maintaining color yield and fastness properties.
Environment friendly dyeing processes for cotton ppt
The document discusses various environmentally friendly dyeing processes for cotton textiles. It focuses on using bifunctional reactive dyes that have high fixation rates and reduce dye concentrations in effluents. Low salt reactive dyes and glucose are proposed as alternatives to reduce salt levels in effluents from reactive and sulfur dyeing respectively. Iron complexes and electrochemical reduction methods are suggested to replace sodium hydrosulfite in vat dyeing. The aim is to make dyeing more sustainable by minimizing pollution from dye effluents.
Development in finishing power point
The document discusses developments in eco-friendly finishes for cotton fabrics and garments. It describes how conventional cotton cultivation uses chemicals that pollute water, and introduces organic cotton cultivation methods. It also discusses naturally colored cotton cultivation to eliminate dyeing pollution. Various eco-friendly functional finishes are explained, including wrinkle-free finishes using polycarboxylic acids or silicone softeners instead of formaldehyde-based chemicals. The document provides details on application methods and quality control for eco-friendly finishes.
Development in finishing power point
The document discusses developments in eco-friendly finishes for cotton fabrics and garments. It describes how organic cotton cultivation eliminates the use of chemicals and how naturally colored cotton can be revived. It also discusses various eco-friendly functional finishes like wrinkle-free, softening, waterproof and stain resistant finishes. Polycarboxylic acids are mentioned as alternatives for formaldehyde-based wrinkle-free finishes, though they are expensive and can cause yellowing. Silicone softeners are also discussed as eco-friendly options.
Development in finishing power point
The document discusses developments in eco-friendly finishes for cotton fabrics and garments. It describes how conventional cotton cultivation uses chemicals that pollute water, and introduces organic cotton cultivation methods. It also discusses naturally colored cotton. For finishes, it focuses on wrinkle-free treatments and alternatives to formaldehyde-based cross-linking agents like polycarboxylic acids, and silicone-based softeners. The goal is to develop finishes that are durable yet cause minimal environmental pollution.
Lecture 6 dyeing of cotton with vat and sulphur dyes
The document discusses the dyeing of cotton with vat dyes. It describes the general properties of vat dyes, including being insoluble in water and requiring reduction to a water-soluble form prior to dyeing. The document outlines the four main steps of vat dyeing cotton: reduction of the dye, dyeing the cotton, oxidizing the dye inside the fiber, and soaping for brightness and fastness. It also discusses different methods of vat dyeing cotton fabrics.
Lecture 6 dyeing of cotton with vat and sulphur dyes
The document discusses the dyeing of cotton with vat dyes. It describes the general properties of vat dyes, including being insoluble in water and requiring reduction to a water-soluble form prior to dyeing. The document outlines the four main steps of vat dyeing cotton: reduction of the insoluble dye to soluble form, dyeing the cotton, oxidizing the dye inside the fiber, and soaping for brightness and fastness. It provides details on exhaust and continuous/semi-continuous vat dyeing methods.
Lecture 6 dyeing of cotton with vat and sulphur dyes
The document discusses the properties and dyeing process of vat dyes, which are insoluble in water but can be converted to a water-soluble form through reduction. It describes the four main steps of vat dyeing cotton fabric: reduction of the insoluble dye to its soluble form, dyeing the cotton with the soluble dye, oxidizing the dye inside the fiber, and soaping for brightness and fastness. It also covers continuous and semi-continuous vat dyeing methods.
Cleaner producton technologies (modified)
The document discusses various cleaner production technologies that can make textile chemical processing more environmentally friendly. It covers eco-friendly approaches to fiber cultivation, dyeing, finishing, and identifying eco-friendly textiles. Some key points include using bifunctional reactive dyes for lower color in effluent, iron complexes or glucose as alternatives to hydrosulphite in vat dyeing, and bio-finishing of denim which is now well-established.
Cleaner producton technologies (modified)
The document discusses various cleaner production technologies that can make textile chemical processing more environmentally friendly. It covers eco-friendly fibers, dyes, reducing agents, cross-linking agents, and finishing techniques that reduce water usage, chemicals, and pollution in textile manufacturing. Alternative processes that are safer for workers and avoid the use of hazardous chemicals like formaldehyde and sodium hydrosulphite are emphasized.
Waste min
The document discusses various waste minimization techniques used in the textile industry, including case studies. It describes optimizing processes like dyeing to reduce water and chemical usage. Specific examples include using low-salt reactive dyes that reduce salt loads in effluent and substituting chemicals like acetic acid with less polluting alternatives. An effluent treatment plant case study showed implementing these techniques helped meet pollution control standards.
Waste min
The document discusses various waste minimization techniques used in the textile industry, including process optimizations, chemical substitutions, and effluent treatment. Specific examples include replacing starch with PVA in sizing, using low-salt reactive dyes, lowering liquor ratios in dyeing, and treating effluent with screening, equalization, coagulation, sedimentation, and activated sludge processes. A case study describes measures taken at a textile mill in India that reduced total effluent volume by 25,000 liters per day and pollution load by 40-45% through various waste reduction efforts.
Waste min
The document discusses various waste minimization techniques used in the textile industry, including process optimizations, chemical substitutions, and effluent treatment. Specific examples include replacing starch with PVA in sizing, using low-salt reactive dyes, lowering liquor ratios in dyeing, and treating effluent with screening, equalization, coagulation, sedimentation, and activated sludge processes. A case study describes measures taken at a textile mill in India that reduced total effluent volume by 25,000 liters per day and pollution load by 40-45% through various waste reduction efforts.
Waste min
The document discusses various waste minimization techniques used in the textile industry, including process optimizations, chemical substitutions, and effluent treatment. Specific examples include replacing starch with PVA in sizing, using low-salt reactive dyes, lowering liquor ratios in dyeing, and treating effluent with screening, equalization, coagulation, sedimentation, and activated sludge processes to reduce COD and BOD loads by 40-45%.
Waste min
The document discusses various waste minimization techniques used in the textile industry, including process optimizations, chemical substitutions, and effluent treatment. Specific examples include replacing starch with PVA in sizing, using low-salt reactive dyes, lowering liquor ratios in dyeing, and treating effluent with screening, equalization, coagulation, sedimentation, and activated sludge processes. A case study describes measures taken at a textile mill in India that reduced total effluent volume by 25,000 liters per day and pollution load by 40-45% through various waste reduction efforts.
Waste min
The document discusses various waste minimization techniques used in the textile industry, including case studies. It describes optimizing processes like dyeing to reduce water and chemical usage. Specific examples include using low-salt reactive dyes that reduce salt loads in effluent and substituting chemicals like acetic acid with less polluting alternatives. An effluent treatment plant case study showed implementing these techniques helped meet pollution control standards.
Dyeing of cotton with vat dyes
This document summarizes the key properties and processes involved in dyeing cotton with vat dyes. Vat dyes are insoluble in water but can be converted to a water-soluble form through a process called vatting, which involves reducing the dye and forming a salt. Cotton is dyed by first converting the vat dye to its soluble form, dyeing the cotton, then reoxidizing the dye inside the fiber. The document outlines the chemical classes of vat dyes and the steps involved in vat dyeing cotton fabric using exhaust or continuous methods.
Similar to Printing of wool, avikanagar 29.9.03 (20)
Environment friendly dyeing processes for cotton ppt
Environment friendly dyeing processes for cotton ppt
Environment friendly dyeing processes for cotton ppt
Environment friendly dyeing processes for cotton ppt
Environment friendly dyeing processes for cotton ppt
Environment friendly dyeing processes for cotton ppt
Environment friendly dyeing processes for cotton ppt
Environment friendly dyeing processes for cotton ppt
Environment friendly dyeing processes for cotton ppt
Environment friendly dyeing processes for cotton ppt
Lecture 6 dyeing of cotton with vat and sulphur dyes
Lecture 6 dyeing of cotton with vat and sulphur dyes
Lecture 6 dyeing of cotton with vat and sulphur dyes
Lecture 6 dyeing of cotton with vat and sulphur dyes
Lecture 6 dyeing of cotton with vat and sulphur dyes
Lecture 6 dyeing of cotton with vat and sulphur dyes
More from Adane Nega
3. digital printing technologies
The document discusses various digital printing technologies, focusing on inkjet printing methods. It describes two main inkjet technologies: continuous inkjet (CIJ) and drop on demand (DOD). CIJ uses a continuous stream of ink broken into droplets through pressure, while DOD only deposits ink droplets when needed in response to digital signals. Common DOD methods are thermal bubble jet and piezoelectric, while CIJ includes single and multiple jet systems using deflection plates or air jets. The document compares the advantages and disadvantages of each technology.
4. essential elements for inkjet printing
This document discusses the essential elements required for inkjet printing of textiles. It outlines the necessary hardware including computers, software, printers, and fabric pre-treatment machines. It also discusses ink requirements including formulations for different fiber types and extended color gamuts. Finally, it addresses challenges in commercializing the technology such as printing speeds and the need for post-treatments, while envisioning future possibilities like mass customization and integration with other technologies.
Dyeing of pet wool blends
This document discusses methods for high temperature dyeing of wool-polyester blends to minimize damage to the wool. It recommends using formaldehyde or similar agents to protect the wool at temperatures up to 120°C. Specific dyeing times and temperatures are provided for different levels of wool protection. One-bath and two-bath dyeing methods are described that allow deep shades while reducing staining of the wool component. Considerations for dye selection, recipes, and procedures are provided to optimize results while minimizing wool degradation.
Dyeing of polyester
The document discusses various methods for dyeing polyester fibers, including:
1) Batch dyeing without carriers involves dyeing at a boil without additives to help penetration.
2) Carrier dyeing uses compounds to swell the fibers and allow deeper dye penetration.
3) High temperature, high pressure (HTHP) dyeing penetrates dye rapidly at 120-130°C without carriers.
4) Continuous thermosol dyeing involves padding, drying, and fixing dye within fibers at 190-220°C.
3. digital printing technologies
The document discusses various digital printing technologies, focusing on inkjet printing methods. It describes two main inkjet technologies: continuous inkjet (CIJ) and drop-on-demand (DOD). CIJ uses a continuous stream of ink broken into droplets through pressure, while DOD only deposits ink droplets when needed in response to digital signals. Common DOD methods are thermal bubble jet and piezoelectric, with the latter providing higher resolution and suitability for wider ranges of inks. The technologies each have advantages and limitations for different applications like textile printing.
93, 94 introduction to digital printing
This document compares and contrasts analog and digital printing technologies. It discusses the advantages and disadvantages of each, such as analog printing being better for mass production while digital is more suitable for variable, personalized, or short print runs. The document also examines factors to consider when choosing a printing method like image quality, production speed, and cost. Additionally, it describes how some systems combine analog and digital to leverage the strengths of both.
4. essential elements for inkjet printing
This document discusses the essential elements required for inkjet printing of textiles. It outlines the necessary hardware including computers, software, printers, and fabric pre-treatment machines. It also discusses ink requirements including formulations for different fiber types and extended color gamuts. Finally, it addresses challenges in commercializing the technology such as printing speeds and the future potential of digital printing for mass customization and integrated production systems.
Digital printing asian dyer extended version)
Digital printing offers several advantages over conventional analog printing methods for textiles. It allows for mass customization and quick turnaround due to minimal press setup times. Digital printing can change color schemes or designs in real time during production. It also produces less waste and has a lower environmental impact than screen printing. However, digital printing has lower throughput than analog methods and higher costs for long runs. It also requires specially coated substrates and has limitations in ink color options and opacity.
Dyeing of polyester
The document discusses various methods for dyeing polyester fibers, including:
1) Batch dyeing without carriers involves dyeing at a boil without additives to help penetration.
2) Carrier dyeing uses compounds to swell the fibers and allow deeper dye penetration.
3) High temperature, high pressure (HTHP) dyeing penetrates dye rapidly at over 120°C without carriers.
4) Continuous thermosol dyeing involves padding, drying, and fixing dye within fibers at 190-220°C.
Dyeing of pet wool blends
This document discusses methods for high temperature dyeing of wool-polyester blends to minimize damage to the wool. It recommends using formaldehyde or similar agents to protect the wool at temperatures up to 120°C. Specific dyeing times and temperatures are provided for different levels of wool protection. One-bath and two-bath dyeing methods are described that allow deep shades while reducing staining of the wool component. Post-treatment and troubleshooting steps are also outlined.
Dyeing of polyamide fibres
This document discusses the dyeing of polyamide fibers like wool, silk, and nylon. It explains the dyeing mechanisms and how the structure of polyamide fibers allows them to be dyed using different dye classes like acid dyes, chrome dyes, and reactive dyes depending on the desired properties like colorfastness. Factors like pH, temperature, and use of leveling agents affect dye uptake and uniformity. Different types of acid dyes provide varying colorfastness and are suitable for different applications depending on those properties.
Indroduction to printing
The document discusses different types of textile printing methods. It begins by distinguishing between dyeing and printing, noting that dyeing results in uniform coloration while printing applies color locally in designs. It then covers various printing styles like direct, resist, and discharge printing. The document concludes by describing common printing methods such as block, stencil, roller, screen, and digital printing.
General composition of print paste
The document summarizes the general composition and essential qualities of print pastes used in textile printing. Print pastes typically contain dyestuffs, thickeners, solvents, humectants, oxidizing agents, and defoaming agents. Thickeners are important for ensuring the print paste sinks into the fabric quickly and adheres properly after printing and drying. Other components like hydroscopic agents and pH controllers help facilitate dye fixation during steam treatment. Proper selection and balance of ingredients is necessary for achieving high quality, well-defined prints on fabrics.
Pigment printing
There are key differences between dye and pigment printing. Pigments have no affinity for fibers and are insoluble in water, requiring a binder to fix them onto fibers. Dyes have affinity for fibers and are water soluble. Pigment printing uses a binder that is an aqueous emulsion copolymer which polymerizes during curing to form a strong film embedding the pigment and adhering it to the fiber. Suitable thickeners for pigment printing are emulsion or synthetic thickeners which do not interact negatively with the binder. Emulsion thickeners are prepared using oil, water, emulsifiers and other agents, while synthetic thickeners are high molecular weight copolymers that thicken when
Indroduction to printing
The document discusses different types of textile printing methods. It distinguishes between dyeing and printing, noting that dyeing results in uniform coloration while printing applies color locally in designs. Printing uses an aqueous medium of high viscosity to prevent color from spreading. Common printing methods described include block, stencil, roller, screen, and digital printing. Resist and discharge styles of printing are also outlined.
Manual screen printing
Roller printing was invented by James Bell of Scotland in 1783. It was the first machine used for textile printing and remained popular for over 200 years until the 1960s. The roller printing machine used engraved rollers to transfer designs onto fabric passing between multiple rollers. It could print 1 to 12 colors at speeds of 70-80 meters per minute. The popularity of roller printing declined after the invention of rotary screen printing in 1960, which allowed for faster, multi-color printing and is now obsolete.
More from Adane Nega (20)
Recently uploaded
Benner "Expanding Pathways to Publishing Careers"
This presentation was provided by Rebecca Benner, Ph.D., of the American Society of Anesthesiologists, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.
Educational Technology in the Health Sciences
Plenary presentation at the NTTC Inter-university Workshop, 18 June 2024, Manila Prince Hotel.
Bossa N’ Roll Records by Ismael Vazquez.
Bossa N Roll Records presentation by Izzy Vazquez for Music Retail and Distribution class at Full Sail University
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
NIPER JEE PYQ
NIPER JEE QUESTIONS
MOST FREQUENTLY ASK QUESTIONS
NIPER MEMORY BASED QUWSTIONS
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
Andreas Schleicher, Director of Education and Skills at the OECD presents at the launch of PISA 2022 Volume III - Creative Minds, Creative Schools on 18 June 2024.
Temple of Asclepius in Thrace. Excavation results
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptx
Slides from a Capitol Technology University webinar held June 20, 2024. The webinar featured Dr. Donovan Wright, presenting on the Department of Defense Digital Transformation.
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
A Free 200-Page eBook ~ Brain and Mind Exercise.pptx
(A Free eBook comprising 3 Sets of Presentation of a selection of Puzzles, Brain Teasers and Thinking Problems to exercise both the mind and the Right and Left Brain. To help keep the mind and brain fit and healthy. Good for both the young and old alike.
Answers are given for all the puzzles and problems.)
With Metta,
Bro. Oh Teik Bin 🙏🤓🤔🥰
skeleton System.pdf (skeleton system wow)
🔥🔥🔥🔥🔥🔥🔥🔥🔥
إضغ بين إيديكم من أقوى الملازم التي صممتها
ملزمة تشريح الجهاز الهيكلي (نظري 3)
💀💀💀💀💀💀💀💀💀💀
تتميز هذهِ الملزمة بعِدة مُميزات :
1- مُترجمة ترجمة تُناسب جميع المستويات
2- تحتوي على 78 رسم توضيحي لكل كلمة موجودة بالملزمة (لكل كلمة !!!!)
#فهم_ماكو_درخ
3- دقة الكتابة والصور عالية جداً جداً جداً
4- هُنالك بعض المعلومات تم توضيحها بشكل تفصيلي جداً (تُعتبر لدى الطالب أو الطالبة بإنها معلومات مُبهمة ومع ذلك تم توضيح هذهِ المعلومات المُبهمة بشكل تفصيلي جداً
5- الملزمة تشرح نفسها ب نفسها بس تكلك تعال اقراني
6- تحتوي الملزمة في اول سلايد على خارطة تتضمن جميع تفرُعات معلومات الجهاز الهيكلي المذكورة في هذهِ الملزمة
واخيراً هذهِ الملزمة حلالٌ عليكم وإتمنى منكم إن تدعولي بالخير والصحة والعافية فقط
كل التوفيق زملائي وزميلاتي ، زميلكم محمد الذهبي 💊💊
🔥🔥🔥🔥🔥🔥🔥🔥🔥
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
Practical manual for National Examination Council, Nigeria.
Contains guides on answering questions on the specimens provided
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
The History of NZ 1870-1900.
Making of a Nation.
From the NZ Wars to Liberals,
Richard Seddon, George Grey,
Social Laboratory, New Zealand,
Confiscations, Kotahitanga, Kingitanga, Parliament, Suffrage, Repudiation, Economic Change, Agriculture, Gold Mining, Timber, Flax, Sheep, Dairying,
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...Nguyen Thanh Tu Collection
https://app.box.com/s/qspvswamcohjtbvbbhjad04lg65waylfRecently uploaded (20)
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
Juneteenth Freedom Day 2024 David Douglas School District
Juneteenth Freedom Day 2024 David Douglas School District
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptx
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptx
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
A Free 200-Page eBook ~ Brain and Mind Exercise.pptx
A Free 200-Page eBook ~ Brain and Mind Exercise.pptx
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
Printing of wool, avikanagar 29.9.03
- 1. PRINTING OF WOOL R.B.CHAVAN DEPARTMENT OF TEXTILE TECHNOLOGY INDIAN INSTITUTE OF TECHNOLOGY HASU-KHAS, NEW DELHI 110016