Hany Metwally Mohamed is seeking a project management position utilizing his experience in construction project controls. He has over 15 years of experience in planning, cost control, and project engineering roles for oil and gas projects. He is proficient in Primavera P6 and has delivered training courses in project management topics.
Planning and Scheduling Construction Projects using Primavera Software A Case...ijtsrd
Planning and Scheduling are very essential in the large infrastructure projects like road and bridge construction. These projects have numerous stakeholders and large amount of money, resources are invested. Improper planning and scheduling leads to loss of resources, increase in project cost and unpleasant delays. But with computer and software evolution, it is now possible to plan these projects using software like Primavera P6 and Microsoft office project. This paper deals with presentation of AwasYojna project in New Market Bhopal comparing the two different blocks namely Block A and Block B. The project framed stated the advantage and added benefits of web based primavera P6 for planning and scheduling of structures under construction under the government scheme of “AwasYojna” framing the issues and complications faced in the time frame of construction and availability of resources. Nidhi Raghuwanshi | Prof. M. C. Paliwal "Planning and Scheduling Construction Projects using Primavera Software: A Case Study" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-2 , February 2021, URL: https://www.ijtsrd.com/papers/ijtsrd38447.pdf Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/38447/planning-and-scheduling-construction-projects-using-primavera-software-a-case-study/nidhi-raghuwanshi
Planning and Scheduling Construction Projects using Primavera Software A Case...ijtsrd
Planning and Scheduling are very essential in the large infrastructure projects like road and bridge construction. These projects have numerous stakeholders and large amount of money, resources are invested. Improper planning and scheduling leads to loss of resources, increase in project cost and unpleasant delays. But with computer and software evolution, it is now possible to plan these projects using software like Primavera P6 and Microsoft office project. This paper deals with presentation of AwasYojna project in New Market Bhopal comparing the two different blocks namely Block A and Block B. The project framed stated the advantage and added benefits of web based primavera P6 for planning and scheduling of structures under construction under the government scheme of “AwasYojna” framing the issues and complications faced in the time frame of construction and availability of resources. Nidhi Raghuwanshi | Prof. M. C. Paliwal "Planning and Scheduling Construction Projects using Primavera Software: A Case Study" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-2 , February 2021, URL: https://www.ijtsrd.com/papers/ijtsrd38447.pdf Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/38447/planning-and-scheduling-construction-projects-using-primavera-software-a-case-study/nidhi-raghuwanshi
7 years of experience in Oil & gas and Petrochemical industries, Renewable Energy project
P l a n n i n g , Scheduler, Control, Real Manager and Field, Leader. I analyses, plan, organize, negotiate, direct, control,
manage and evaluate.
I am also responsible for: the procurement budget, its policy and strategy, its logistics, an organization, a region and, in
particular, to identify opportunities to improve operations.
With developed skills in Primavera P6 and good knowledge of National Electrical Codes.
Large Planning is a general term that sets a clear road map that should be followed to reach a destination. The term, therefore, has been used at different levels to mean different things. Planning involves the breakdown of the project into definable, measurable, and identifiable tasks activities, and then establishes the logical interdependences among them. These plans involve four main steps Performing breakdown of work items involved in the project into activities. Identifying the proper sequence by which the activities should be executed. Activities representation. Estimating the resources, time, and cost of individual activities. Planning requires a rigorous effort by the planning team. A planner should know the different categories of work and be familiar with the terminology and knowledge used in general practice. Also, the planning tem should seek the opinion of experts including actual construction experience. This helps produce a realistic plan and avoids problems later on site. P. B. Sudha | Dr. K. Vidhya "Project Planning & Scheduling" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, URL: https://www.ijtsrd.com/papers/ijtsrd31775.pdf Paper Url :https://www.ijtsrd.com/engineering/civil-engineering/31775/project-planning-and-scheduling/p-b-sudha
1. HANY METWALLY MOHAMED
N O . 3 7 , M U S T A F A E L - S A W Y S T , H E L W A N , C A I R O , E G Y P T • C O D E 1 1 4 2 1
• + 2 0 1 2 2 2 4 2 4 8 8 8 • h a n y . m e t w a l l y @ h o t m a i l . c o . u k ,
1 | P a g e
Objective:
I’m seeking an opportunity to direct my experience through a position in Project Management
Field, where experience, mind orientation, engineering and management skills with a commitment
to work can effectively contribute to the global/Local successful operation of the organization and
to help myself grow further professionally and technically to fulfills my personal ambition and
enhances my knowledge.
Mini Professional Biography:
Through my career, I have been assigned to Long Term Mega projects in Oil and Gas Field,
as A Project Engineer, Planning Engineer, Deputy Project Manager in an Owner and Construction
Companies, Senior Planning and Cost Control Engineer with Consultant Company and Cost
Control Consultant for Construction Company.
I have Delivered Many training Sessions, workshops, implementation projects for different Back
ground Personnel/clients; International Project Management Consultancy Organization Such as
CMCS, Collaboration, Management & Control Solutions, Internal training in ECG, Engineering
Consultants Croup Company, Private Educational Centers In Cairo and Non for profit organization,
I have delivered a technical Training Courses Such As PRIMAVERA P6, Online Integration of
ERP system with Primavera and Human Development Courses to different background Personnel.
Educational background:
B.Sc. Mechanical Engineering, May-2005.
Faculty of engineering. HELWAN University.
Diploma of an International Welding Engineer (IWE). March- 2008.
The International institute of welding (IIW)
A diploma according to ISO 14731 (EN 719) and according to guidelines from The International
institute of welding (IIW) and the European Federation for Welding, Joining and Cutting (EWF).
Extra courses:
“Extension of Time Request – Delay analysis” From CMCS Egypt, 20 to 28 October 2014.
“Certified Cost Professional CCP, Course Preparation” From Campus Academy, Egypt April –
June 2014.
“Project Management Professional PMP, Course Preparation” From Brooklyn Academy, Egypt
May‐August 2014.
“Managing Resources in Primavera P6 Professional Rel 8.1 “from Oracle PromaSatr Egypt.
On May 2013
“Managing Projects in Primavera P6 Professional Rel 8.1 “from Oracle PromaSatr Egypt. On
April 2013
“ASME B31.3 Process Piping” from the American University in Cairo. From 15 to 20 May
2010.
“ASME VIII DIVISION I Design & Fabrication Of Pressure Vessels” from The American
University In Cairo. From 04 to 10 October 2009.
“International Welding Engineer (IWE)” from Central Metallurgical Research & Development
Institute (CMRDI) in Cairo. From 4/11/2007 – 16/2/2008 with S.N # IWE AT 0595.
"Ultrasonic Testing level II" from Detection Welding & NDT Consulting Office according to
SNT-TC-1A, ACCP professional Level III (74268) on December 2nd 2010.
2. HANY METWALLY MOHAMED
N O . 3 7 , M U S T A F A E L - S A W Y S T , H E L W A N , C A I R O , E G Y P T • C O D E 1 1 4 2 1
• + 2 0 1 2 2 2 4 2 4 8 8 8 • h a n y . m e t w a l l y @ h o t m a i l . c o . u k ,
2 | P a g e
"Radiograph Testing level II" from Detection Welding & NDT Consulting Office according to
SNT-TC-1A, ACCP professional Level III (74268) on November 25th 2010.
"Liquid Penetrant Testing level II" from Detection Welding & NDT Consulting Office
according to SNT-TC-1A, ACCP professional Level III (74268) on November 18th 2010.
"Applied Welding Technology” (Engineers) from Egyptian Welding Academy (EWA). From
24/7/2004 – 12/8/2004.
Experience summary:
FreeLancer Primavera P6 and Human Development trainer.
1- Orascom Construction Industry (OCI).
Planning Team Leader, ERC Refinery Project.
16 April 2015 till Now
Responsibilities:
Leading and Supervising the project planning & Strategy Team in providing overall planning
support for all the Divisions.
Monitoring the whole project to effectively identify and report areas of concern for mitigating
actions within contract limits and ensure alignment within the other relevant Company and client
Stakeholders.
Preparing the detailed construction schedules for Civil, Steel, Mechanical and Piping Activities.
Preparing the resources plans such as Manpower (Direct/Indirect), Equipment mobilization plans
in details.
Preparing the Cost Plans with reporting to the corporate financial department.
Preparing the project organization chart with compliance to corporate policy & Client
requirements.
Preparing the construction equipment maneuvering plans on the construction site especially
during the construction peak period.
Attending all the site/Head office meetings either with the top management or the coordination
meeting with all disciplines (Civil/Mech./Steel/Piping) and advising for the progress, Impacts and
Corrective actions.
Monitoring, following up the progress and reporting to Client and Corporate top management.
Preparing and submitting the daily, weekly & Monthly reports.
Tracking and Recording issues impacting time Delay and Idled Resources.
Preparing Acceleration plans with front loaded histogram for the construction activities in order
to achieve the contractual completion date.
Preparing Monthly reports which reflect the onsite progress and updated Time schedule.
3. HANY METWALLY MOHAMED
N O . 3 7 , M U S T A F A E L - S A W Y S T , H E L W A N , C A I R O , E G Y P T • C O D E 1 1 4 2 1
• + 2 0 1 2 2 2 4 2 4 8 8 8 • h a n y . m e t w a l l y @ h o t m a i l . c o . u k ,
3 | P a g e
2- ECG Engineering Consultants Group S.A.
Senior Planning and Cost Control Engineer.
01 June 2014 till 15 April 2015
Responsibilities:
Preparing the design and tentative time schedules during the proposal phase.
Updating, during the mobilization phase of the project, the originally prepared milestones
schedule in the proposal phase. Issues the revised milestone schedule after approval by the
Project Manager, to all key personnel of the project.
Identifying with the assistance of the Project Manager the constraints between the different
project disciplines and the sequence/timing of tasks for fulfillment of the time schedule of the
project.
Issuing the final form of the time schedule -baseline schedule “REV 0”-to the Project Manager.
Ensuring issuance of PM Budget to all active projects /additions.
Reviewing of the assigned budgeted hours and resource assignments to ensure proper resource
allocation for projects/ additions tasks.
Updating the time schedule on bi-weekly bases reflecting the actual project status (dates,
percentage completion and actual man-hours consumption).
Planning and initiating corrective actions and Reviewing schedule progress reports.
Ensuring proper loading of actual hours, and to be in conformity with related progress of work.
Maintain rectifying any information in Data Base (for example: relocated persons, multidiscipline
assignments, etc.).
Expedite PM’s to apply any required corrective actions.
Informing the Project Manager for any deviation from budget man-hours or scheduled time,
makes necessary schedules and resources allocation adjustments.
Developing during the construction phase, the detailed field schedules in conjunction with the
Construction Manager.
Reviewing contractors’ schedules and follow it up periodically.
Preparing evaluation reports for bidder’s proposed time schedules based on conformity with
tender requirements.
Analyzing and evaluating contractors’ claims, prepares recommendations concerning
justified/excusable time extensions, as the case may be.
2- SHABAKAT Natural Gas a subsidiary NATGAS (National Gas Company)
Senior Project Controls Engineer
June 2010 until May 2014
Responsibilities:
Initiating a preliminary Schedule time for projects based on the scope of work, start and due
dates.
Assisting in the preparation of Project Execution Plan (PEP).
Assisting in preparation of project’s Quality Control Manual and maintenance of project control
policies and procedures.
Preparing master project schedule and maintain baseline based on the scope of work and
contractual requirements through Primavera P6.
4. HANY METWALLY MOHAMED
N O . 3 7 , M U S T A F A E L - S A W Y S T , H E L W A N , C A I R O , E G Y P T • C O D E 1 1 4 2 1
• + 2 0 1 2 2 2 4 2 4 8 8 8 • h a n y . m e t w a l l y @ h o t m a i l . c o . u k ,
4 | P a g e
Responsible for ensuring that construction projects are completed within set deadlines, on budget,
and in line with all the relevant safety standards and regulations.
Attending weekly meetings with managers and other engineers to discuss the progress made and
any issues that may arise over the course of the project, make decisions related to logistics and
resources, and collect all the information necessary for planning. Whenever possible.
Interface with responsible project personnel to obtain periodic status updates of budget. Progress,
forecasts, schedule and issues.
Consider the costs and possibilities of reducing them without compromising quality or safety.
Preparing project “S” curves based on approved way percentage / man hours.
Manpower loading to the schedule and preparation of manpower and equipment histogram.
Project Engineer
June 2008 until May 2010
Responsibilities:
Reviewing contracts, scope of works and Shop drawings revision.
Assisting in establishing project’s Quality Control Manual and technical package preparation for
procurement in existing projects.
Coordinating the project design, engineering deliverables, engineering activities and ensures the
corresponding design documentation complies with the Quality Procedures per Client and
Company specifications.
Coordinating the management of engineering sub consultants, and with sub-contractors.
Coordinating project Technical Risk Assessments.
Managing the technical documentation to procurement, construction, and regulatory agencies (for
obtaining necessary Permits for the project).
Interfacing with responsible project personnel to obtain periodic status updates of budget.
Progress, forecasts, schedule and issues.
Working to determine the best ways to move materials, machinery and equipment between
locations, and coordinate all the resources with ensuring that Safety Practices are implemented.
Interacting with discipline leads and/or discipline engineers to ensure compliance with project
objectives.
Preparing weekly progress reports, project procedures, project meeting minutes.
Related projects and clients
El-ATTF power station pipeline project (70 bars – 16”) NATGAS. EPC Project.
70 BARG Pressure Reduction Stations, Pietro Fiorintini,” Many Projects of piping systems”.
70 BARG Pressure Reduction Stations, Metano Impianti,” Many Projects of piping systems”.
70-10 BARG Gas Regulators, Bryan Donkin RMG,” Many Projects of piping systems”. EPC projects.
70-10 BARG Gas Regulators, El-FAYOUM Gas Company” Many Projects of piping systems”. EPC
Projects.
70 BARG PRMS’s, AKFEL MϋHENDISLIK,” Many Projects of piping systems”.
70-10 BARG Gas Regulators, NATGAS CO,” Many Projects of piping systems”. EPC projects.
EXTENSION OF ELAB STORAGE TANKS 10,000 radial inch piping system PETROMAINT Co and
ELAB “Egyptian Linear Alkyl Benzene Co”.
SULFOLANE and HYDROCARBON Pressure vessels. PETROMAINT Co. EPC projects.
5. HANY METWALLY MOHAMED
N O . 3 7 , M U S T A F A E L - S A W Y S T , H E L W A N , C A I R O , E G Y P T • C O D E 1 1 4 2 1
• + 2 0 1 2 2 2 4 2 4 8 8 8 • h a n y . m e t w a l l y @ h o t m a i l . c o . u k ,
5 | P a g e
2- April 2008 till June 2008 DSD Ferrometalco (DSD)
Welding Engineer
Responsibilities:
Establishing and applying WPS for different projects in different Welding Process (SMAW –
SAW-MIG-MAG), PQR and testing welding personnel for certification.
Establishing welding maps and welding book for existing projects and welding procedures to
guide production and welding personnel relating to specification restrictions, material processes,
pre- and post-heating requirements which involve use of complex alloys.
Directing technical personnel in performing inspections to ensure workers' compliance with
established welding procedures, restrictions, and standards; in testing welds for conformance with
national code requirements.
Preparing technical reports as result of research, development and preventive maintenance
investigations.
Evaluating new developments in welding field for possible application to current welding
problems or production processes.
Directing and supervising static equipment’s Installation in site.
Directing and supervising technical NDE and Quality control personnel in performing
inspections.
Preparing and reviewing technical reports for all NDE works.
Interpreting welding “x-ray and gamma Ray “RT films and preparing all required reports.
Related projects
ANSALDO CALDAIE EL-TEBBIN THERMAL POWER PLANT “piping and steel structure”.
ORASCOM construction industries Syria Cement Factory “steel Structure”.
ALSTOM Power inc, GRAIN HRSG's, AGHADA HRSG, Drum Saddle Support Beams for
AGIOS NIKOLAOS CCPP.
3- December 2006 till October 2007. (ECT) sub-contractor to KHALDA Petroleum Company.
Project Engineer
Responsibilities:
Assisting in preparation of project’s documentations.
Assisting in Projects estimation.
Preparing Shop drawings revision.
Issuing Invoices according to contract’s scope of works.
Reviewing Welding procedures specifications WPS and welding books as per required.
Follow up for Fabrication, sandblasting, painting and installation of steel works.
Applying Visual inspection.
Assistant in projects’ estimation.
Assistant in technical package preparation for existing projects.
Shop drawings revision.
Preparing reports for maintenance works.
Related projects
Steel structures in oil and gas plants.” Continuous Projects”. EPC projects.
Steel facilities in oil and Gas fields.” Continuous Projects”. EPC projects.
6. HANY METWALLY MOHAMED
N O . 3 7 , M U S T A F A E L - S A W Y S T , H E L W A N , C A I R O , E G Y P T • C O D E 1 1 4 2 1
• + 2 0 1 2 2 2 4 2 4 8 8 8 • h a n y . m e t w a l l y @ h o t m a i l . c o . u k ,
6 | P a g e
Professional Membership:
European Federation for Welding, Joining and Cutting (EWF) member ID # AT06090066.
Egyptian Engineers syndicate Member, member ID # 48/05251
Skills:
Software Skills:
Primavera P6 REL 7, 8.1 and MS projects.
Very good command of design programs; AutoCAD 2010 & 2011 releases.
Excellent command Win 7 operating systems.
Very good command of MS Office 2010 (Word, Excel & PowerPoint and Outlook).
Good surfing skills on the Internet.
Personal Skills:
Emotional Intelligence session ‐ 8 Hours
DISC Profile session ‐ 4 Hours
Negotiation skills session ‐ 4 Hours.
Time management session ‐ 4 hours.
Presentation skills session ‐ 4 hours.
Business communications skills ‐ 4 Hours.
Communication Skills Session ‐ 4 hours.
Marketing Online session ‐ 4 hours
Language:
Very Good command of English both written and spoken.
Native speaker of Arabic (mother tongue).
Personal Information:
Marital Status: Married
Citizenship: Egyptian
Date of Birth: 1/3/1981
Military status: Completed.
Passport: Valid.
Drive license: Valid (Egypt)
Permanent Home
Location:
Cairo –Egypt
References Furnished upon request