All Building Architech/MEP/Smart World communication/Electrical Contractor/ EPC/Fire and Safety Project Handling Companies

1. MAKE IN INDIA
Make India Safe India Lead India
Smart India Fire & Safety Presentation

2. Smart India Smart Move

3. Are we all safe and free Sleeping

4. My Gudget My Confidence My Safety

5. Safety for all BuildingsFire and apply Safety

8. External/Internal Surge Source

9. An Arcing Fault is the flow of current through
the air between phase conductors or phase
conductors and neutral or ground. Concentrated
radiant energy is released at the point of arcing
an a small amount of time resulting
in Extremely High Temperature.

11. Fire Accident
Reason Lose Contact Earthing Disorder and Lightning

12. Sikhana to Padega Hi Follow NBC2016

13. Surge in Systems and Result

14. Surge in DC Application

16. JMV LPS Products

17. Copper Cladded Conductor For Electrical
Installation
The Copper Clad Steel Grounding Conductor is made up of steel with the coating of 99.99% pure copper. These
conductors/ wires
or strands are equipped with the strength of steel with the conductivity and copper with the better corrosion
resistance property. The concentric copper cladding is metallurgic ally bonded to a steel core through a continuous,
solid cladding process using pressure rolling for primary bonding. The copper cladding
thickness remains constant surrounding steel. We use different steel grades for the steel core result in Dead Soft
Annealed, High strength and Extra High Strength Characteristics.
The Copper Clad Steel Wire yields a composite conductivity of 21%, 30% and 40% IACS, and available in Annealed
and Hard drawn. We are delivering products with varied conductivity and tensile strength as per the customer need.
Further, the wire can be processed to be silver plated or tinned copper clad steel wire.

18. Most Efficient Joint Process/Fail Proof
It is efficient and superior to all existing surface –to-surface
mechanical retention connectors.

19. What is Exothermic Welding System Copper to Bi-Metal and Alumenium
Types of Exothermic Joints:
Possible to join any bi metal except aluminum
Exothermic welding is a process of making maintain free highly molecular bonding process is superior in
performance connection to any known mechanical or compression-type surface-to-surface contact connector.
Exothermic weld connections provide current carrying (fusing) capacity equal to that of the conductor and will
not deteriorate with age.
 It offers Electrical connections between two or more copper to copper and copper to steel conductors.
 Highly portable method as it does not require any external power source or heat source, so it can be done
almost anywhere.
 It provides strong permanent molecular bond among metallic conductors that cannot loosen and further will
not deteriorate with age.
 Connection does not corrode with time and it offers permanent conductivity.

20. Copper Clad Steel Solid ROD and Conductor

22. LIGHTNING FORMATION

23. Facts about Lightning
• A strike can average 100 million volts of electricity
• Current of up to 200,000 amperes
• Can generate 54,000 oF
• 10/350MicroSec/50KA Fault Current/Discharge in
Nano Sec
Protection
Earthing Design100KA Fault Current/Joints Exothermic
/Flexible Down Conductor with Shortest Route &
Less Corner

24. • Lightning Protection Standard use in India
(IS2309 Now IEC 62305-5)NBC2016
Working Principle Angullar No Compromise with Design
Max Protection 30Mtrs from One
No Product warrenty from Manufacturer
High Maintenance Require
Earthing below 10.00 Ohm

25. Lightning Risk assessment Study is actually the measure of risk of a lightning strike and
probability of damages. As Per IEC62305-2.
All these calculations are based on:
Lightning strike density inthat particular area(provided byOMV i.e.Ng =
8),
Danger for people,
Occupation coefficient of structure,
Relative location of site,
Fire Risk,
Associated services,
Electrical Lines,
Lightning Protection Level,
Surge Arrestor and
Dimensions of installation.

26. Lightning Safety Calculation

27. Lightning Risk Calcuator as per IEC6305

28. PASSIVE PROTECTION SYSTEM

29. The Simple Rod air terminal is composed from a metallic rod with 2 to 8 m height dominating
the structure to protect, and linked to 2 down conductors minimum, and 2 earthing systems.
The protection radius ensured by this air terminal which is limited to 30 m more or less
(Protection level IV, height = 60 m), especially dedicated to the protection of small structures or
areas like towers, hi eys, ta ks, water tower, a te a asts… The EN 0 -3 standard
describes the installation procedure for these air terminals.
13 Simple Rods, 13 down conductors, and 13 earthing systems are necessary to ensure the
protection below :

30. The meshed cage protection is composed from a meshing in roof surface and in the front face around the
uildi g. Surrou di g the roof surfa e, a d o high poi ts, apture poi ts are positio ed. A o du tors’
network is placed at the outer perimeter of the roof. This network is completed by transverse conductors.
The size of the meshing is 5 to meters, and depends on the efficiency needed for the protection. On the
front face of the building, the down conductors are linked at the top to the meshing of the roof. And, down,
to specific earthing systems. The distance between two conductors is 10 to 25 meters, and depend on the
efficiency needed for the protection. The EN 62305-3 describes the installation procedure for this method.
Generally, this method is heavy and expensive, due to the complexity of the structures to protect.
26 capture points, 26 down conductors and a grounded loop earthing system are necessaries to ensure the
protection of the structure here below :

31. The catenary wires protection is a method closed to the meshed cage principle, because it is
constituted with meshing of the conductors far from the structure to protect, to avoid any
contact with lightning current.
Catenary wires are located over the structure to protect, connected to down conductors and
specific earthing systems. The width of the meshing and distance between the down conductors
must respect the same rules as for the meshed cage. The EN 62305-3 describes the installation
procedure for this method.
Generally, this method is heavy and expensive, due to the complexity of the structures to
protect.

32. The ESE air terminal is a terminal which enables to generate artificially an upward leader earlier than a simple rod, with
an ionization system, in order to establish a special impact on its point. The capture of the lightning strike being faster
than a simple rod, this technology enables to benefit from larger protection areas, ensuring protection for large
dimensions structures.
The ge erated protectio radius depe ds o the early strea er e issio value of the air ter i al Δt i µs , its height,
and the efficiency of the protection. The protection radius ensured by this type of air terminal is 120 m (Protection level
IV, height = 60 m , early streamer emission time 60µs) The NFC 17-102 standard describes the installation procedure for
this type of air terminal.
The installation of this type of air terminal is easy and cheaper than other technologies. It can protect whole buildings
with one E.S.E. air terminal. It enables the protection of a structure and its environment, the protection of opened areas
and well integrate in the architecture of a structure without aesthetic alteration.
1 ESE, 2 down conductors and 2 earthing systems are necessary to ensure the protection below :

33. ESE Installation Guidence
ESE AT with radius protection form 32 mtr to 107 mtr.
DMC Insulator .
GI/FRP Mast .
Down Conductor Copper / Copper Cadmium
Cable 70 sq. mm
Copper Bonded Ground Earthing

34. Step – 1
Step – 2
Step – 3
Joint all phase wire/ cable with the help of
crimping tools and lugs
Fixed the separation sheet between all wires/
cables
Close the filled Silicon enclosure from top and
bottom , complete installation is done.
Thimble
Separation Sheet
Gel / Silicon

39. JMV’s Clients

41. Contact Professionals for Advise

42. We Protect You
Use Electrical Safety
Earthing & Protection

43. Contact our Team JMV INDIA
Leader and Insperation behind Mr.Neeraj Saini neeraj@jmv.co.in
Mr.Mahesh Chandra Manav Brand JMV HOD manav@jmv.co.in
www.jmv.co.in
Moblie -919910398999
Telecom -9191204590000