Pneumatic bicycle .
•Download as PPT, PDF•
0 likes•62 views
This document provides an overview of a pneumatic bicycle project. The pneumatic bicycle is designed to be operated by air rather than manually, making it useful for handicapped individuals. It works similarly to a manual bicycle but uses a double acting cylinder and crank case powered by compressed air. While automatic, it can also be switched to manual operation if needed. Future improvements could include adding flexible seating, a secondary air compressor, suspension, and addressing current disadvantages like limited range and lack of braking.
Report
Share
Report
Share
Recommended
Powered wheel chair ppt
We made this powered wheelchair keeping in mind all the basic needs required by those who are not able to move on their own.
Lecture 10 mobile robot design
Basics of mobile robot design have been introduced here. This is a basic part of the robotic design.
8th sem project report of wheel chair k-10655
The document discusses the design of an improved manual wheelchair. It begins by describing the types of existing wheelchairs and issues with their design, such as difficulties with defecation and shifting patients. The proposed new design includes features like a commode for easier defecation, sliding arm rests for improved patient transfer, and an alarm button. The conceptual design was developed using quality function deployment and other methodologies. Materials and an estimated cost are provided. The improved wheelchair aims to address current design limitations and increase comfort and independence for wheelchair users.
Mecanum wheel
The document discusses Mecanum wheels, which allow vehicles to move in any direction. Mecanum wheels consist of a hub with rollers oriented at 45 degrees that enable forward, backward, side-to-side, and rotational movement. They have applications in industrial vehicles for tight spaces. Mecanum wheels provide omnidirectional movement, high load capacity, and easy control but can reduce efficiency and require more complex designs than typical wheels.
Motorised wheel chair a.patra
This document provides information about motorized wheelchairs, including their history, parts, types, and components. It discusses how motorized wheelchairs provide independence and mobility. The key components are the frame, seat, wheels (usually two in front and two motorized in back), motors, batteries, electronic controller, and input device. Common input devices include proportional joysticks and non-proportional switches. The controller translates signals from the input device to control the wheelchair's speed and direction. Adjustable parameters include maximum speed, acceleration, deceleration, and turning capabilities. Batteries power the motors and must be recharged regularly.
Minesweeepers competition ,,
Minesweepers is an international robotic competition on humanitarian demining that aims at motivating researchers and developers to work on innovative solutions for this serious problem.
Electric wheel (orbis wheel)
The document describes Orbis Wheel, an electric wheel technology developed by Orbis CEO Marcus Hays. It consists of a stationary hub and a rotating rim driven by a lightweight motor. This allows the technology to be installed on any vehicle without increasing body weight. It provides benefits like increased horsepower, reduced braking force, and the ability to change vehicles to 4-wheel drive. However, installing the system costs up to $10,000 per vehicle. The technology was prototyped on a Honda Civic Type R, significantly improving acceleration performance.
Self balancing vehicle (Honda'S Riding Assist Technology)
this presentation is based on Honda's Riding assist technology .This was launched on 2017 at CES Las Vegas .
Recommended
Powered wheel chair ppt
We made this powered wheelchair keeping in mind all the basic needs required by those who are not able to move on their own.
Lecture 10 mobile robot design
Basics of mobile robot design have been introduced here. This is a basic part of the robotic design.
8th sem project report of wheel chair k-10655
The document discusses the design of an improved manual wheelchair. It begins by describing the types of existing wheelchairs and issues with their design, such as difficulties with defecation and shifting patients. The proposed new design includes features like a commode for easier defecation, sliding arm rests for improved patient transfer, and an alarm button. The conceptual design was developed using quality function deployment and other methodologies. Materials and an estimated cost are provided. The improved wheelchair aims to address current design limitations and increase comfort and independence for wheelchair users.
Mecanum wheel
The document discusses Mecanum wheels, which allow vehicles to move in any direction. Mecanum wheels consist of a hub with rollers oriented at 45 degrees that enable forward, backward, side-to-side, and rotational movement. They have applications in industrial vehicles for tight spaces. Mecanum wheels provide omnidirectional movement, high load capacity, and easy control but can reduce efficiency and require more complex designs than typical wheels.
Motorised wheel chair a.patra
This document provides information about motorized wheelchairs, including their history, parts, types, and components. It discusses how motorized wheelchairs provide independence and mobility. The key components are the frame, seat, wheels (usually two in front and two motorized in back), motors, batteries, electronic controller, and input device. Common input devices include proportional joysticks and non-proportional switches. The controller translates signals from the input device to control the wheelchair's speed and direction. Adjustable parameters include maximum speed, acceleration, deceleration, and turning capabilities. Batteries power the motors and must be recharged regularly.
Minesweeepers competition ,,
Minesweepers is an international robotic competition on humanitarian demining that aims at motivating researchers and developers to work on innovative solutions for this serious problem.
Electric wheel (orbis wheel)
The document describes Orbis Wheel, an electric wheel technology developed by Orbis CEO Marcus Hays. It consists of a stationary hub and a rotating rim driven by a lightweight motor. This allows the technology to be installed on any vehicle without increasing body weight. It provides benefits like increased horsepower, reduced braking force, and the ability to change vehicles to 4-wheel drive. However, installing the system costs up to $10,000 per vehicle. The technology was prototyped on a Honda Civic Type R, significantly improving acceleration performance.
Self balancing vehicle (Honda'S Riding Assist Technology)
this presentation is based on Honda's Riding assist technology .This was launched on 2017 at CES Las Vegas .
Self balancing vehicle.ppt BY -DINESH KR. JAIPUR
This document discusses self-balancing vehicles, specifically the Segway. It provides a brief history of transportation and defines a self-balancing vehicle as one that uses sensors, gyros, and accelerometers along with a motor to help riders balance on a single-wheeled vehicle. Examples are given of different Segway models, and the key components of the Segway like its batteries, frame, and wireless controller are described. The document explains how gyroscopes and tilt sensors allow the Segway to detect the rider's movements and maintain balance. Advantages of the Segway like reducing emissions and avoiding traffic are highlighted.
automatic wheelchair k-10655
The document proposes the design of a multi-function wheelchair that can be operated using switches and head movements to help physically disabled users gain independence. It discusses the objectives to create a lightweight and strong wheelchair with components like DPDT switches to allow forward and backward movement. The proposed design would include a wiper motor, axle, battery, and Arduino microcontroller. This new wheelchair aims to simplify daily tasks for handicapped individuals without legs or hands so they can move without assistance.
Km172 hand operated tricycle for handicapped people
Mechanical engineering project topics for final year, 1000KV Technologies, Live projects 1000kv technologies, mechatronics projects, live projects ameerpet, live projects near me, live projects institutes Hyderabad, mechanical projects hyderabad,
1000KV Technologies Live projects 9030844877, 9030844866 Educational consultant in Hyderabad, Telangana
Address: #A2, Eureka court complex, 2nd floor, kallu compound road, 2nd floor, A2 flat, image hospital near, Ameerpet, Hyderabad, Telangana 500016
Project ppt presentation (1)
The document outlines the final year project presentation for the fabrication of a solar powered wheelchair. It discusses the introduction, literature review, problem definition, objectives, components, methodology, specifications, and significance of the project. The project aims to provide independent mobility to physically disabled individuals through a solar powered wheelchair that is optimally cost effective. It discusses the various parts of the wheelchair including the solar panels, batteries, motors, wheels and castors. Market research was also conducted to source the required components.
PERFORMANCE EVALUATION OF LEANING REVERSE TRIKE
This paper presents a unique experiment based on a very small and emerging sector of automotive industry, i.e. reverse Trikes or three wheeled vehicles. A REVERSE TRIKE is a vehicle which has two wheels up front and one in the back. A reverse trike is basically a vehicle having two wheels in the front and one on rear side. Most cars have the engine driving the rear wheel and leave steering to the front ones. Some are eco-friendly human powered vehicle with a compounded electric drive system and some are powered by I.C. Engines. The incidence of accidental deaths has shown an increasing trend during the period 2003-2012 with an increase of 51.8% in the year 2012 as compared to 2002; Because of the fact that that these vehicles are very safe to drive and will be very less to become accident prone these three wheelers could be the future of the automotive sector, In the early 20th century three-wheelers gained in popularity as low-cost, lightweight vehicle that is, until about the late 1920s, when cars generally started going more along the four-wheel track. The main aim of this research paper is to evaluate the performance of a three wheeled vehicle based on leaning mechanism and to develop a transition mechanism namely tilt lock system which can transform the leaning vehicle into non- leaning and vice versa according to the requirement. The conceptual design of the project model is based on the study of several literatures related to reverse trike. The mechanisms used for available reverse trikes are very costly and electronics based. So we want to design the mechanism which can overcome the drawbacks of the existing design of a conventional vehicle and also it should take benefit of the three-wheeled transportation and it should also contain the features of an electric vehicle because it is environment friendly. Now for making the system cost effective we have incorporated mechanical leaning system in our design so as eliminate the costly electronic components. The main advantage of this mechanism is that it makes the vehicle more stable during high speed turns so that even a reverse trike can take a turn like a sports bike by leaning to its side. The results of experimental testing are presented to illustrate the real balancing performance of the combined steering and tilting approach used for the Leaning reverse trike that is very economical and fairly simple to drive. In this research it is found that the performance, handling and safety of the Leaning Reverse Trike are much better than any other commercially available three wheelers. The actual fabricated prototype is named as “KLISIâ€Â
single pedal power grinder
The multipurpose machine that is ‘exercise bicycle’ which was basically used for exercising purpose has been modified for grinding. Source of power utilized for above purpose is pedal power. the process is relatively simple, small parts of the object is small grinder, using electric drive is not conducive to energy saving. according to the above technical solution, the operator holds the part to be machined, sit on the seat cushion, two feet on the foot pedal handle and rotate the handle, the handle foot drive shaft rotates, the first drive shaft on which two sprocket rotation, the second sprocket
Solar three wheeler for disabled person
Final Year Major Project on Solar Powered Three Wheeler for Disabled Person.
The design on Solidworks and Analysis on ANSYS Multiphysics. It uses the renewable energy which is eco-friendly and very less pollution.
Design and fabrication of solar three wheeler.
009
The document describes a proposed 90 degree steering mechanism for vehicles. It aims to improve accessibility for disabled people by allowing vehicles to turn within very tight spaces. The mechanism uses electric motors on diagonal wheels to enable 90 degree rotations. It is intended to reduce turning radii, driver effort, and make transportation more independent for wheelchair users. Key components of the system include batteries, DC motors, toggle switches and sprockets/chains to enable the diagonal wheel rotation. The system is analyzed and advantages are noted as easier maneuverability, parking and reduced risk of accidents. It aims to improve on conventional steering mechanisms.
Design and Fabrication of Lever Propelled Wheelchair
This document describes the design and fabrication of a lever-propelled wheelchair. Key points:
- The wheelchair uses bicycle wheels and a chain/sprocket mechanism connected to levers to propel the wheels, requiring less effort than conventional push rim wheelchairs.
- The lever design transmits force more efficiently to move the wheelchair, allowing it to be used indoors and outdoors on various surfaces.
- The wheelchair was designed and modeled using CREO software, then fabricated using welding and assembly of mild steel components. Calculations were performed to determine design specifications like torque and power requirements.
- The goal was to create an affordable and accessible alternative to power wheelchairs that requires less effort
Design and Fabrication of Lever Propelled Wheelchair
This document describes the design and fabrication of a lever propelled wheelchair. It aims to provide a lower-cost alternative to powered wheelchairs that requires less effort than conventional manual wheelchairs. The design uses bicycle wheels and a chain and sprocket mechanism connected to levers to propel the wheelchair. Calculations are shown to demonstrate that this design can achieve higher velocities than a conventional wheelchair with less effort. The wheelchair was successfully tested on smooth and rough terrain. The lever design offers mechanical advantages for indoor and outdoor use at a lower cost than advanced powered wheelchairs.
Design And Implementation Electrical Wheel Chair For Disable Able To Stairs C...
This document describes the design and implementation of an electric wheelchair that has the ability to climb stairs. It uses hydraulic jacks and electrical controls to raise the chair and maintain stability while climbing stairs of various angles. The chair is powered by batteries and can be controlled automatically or manually. It was designed to be simple, low-cost, and able to carry users weighing up to 90kg. The hydraulic jacks and angle sensors allow the chair to stabilize itself and climb stairs of standard dimensions found in homes and public buildings.
self balancing unicycle ppt
This document summarizes a seminar presentation on a self-balancing unicycle. It discusses the history of unicycles originating from bicycles in the late 18th century. It then explains the key technical components of a modern self-balancing unicycle, including a gyroscope and accelerometer for balance control, a brushless DC motor for movement, lithium-ion batteries for power, and a microcontroller like an Arduino for motor control. Literature on existing unicycle designs is also reviewed. The conclusion is that initial motor tests exceeded the torque requirements for stabilization and provided a benchmark for future testing with the motor controller.
Reverse Engineering Design
This document proposes the design of a car that is accessible for people in wheelchairs. It identifies issues with current transportation options for disabled people and aims to design a vehicle that allows independent travel. Key features would include a ramp or lift to aid entry while seated in a wheelchair, controls that can be operated with hands alone, and locks to secure wheelchairs safely inside. The proposed design would be safer, more sustainable and practical than previous models by being electric, accommodating additional passengers, and providing true freedom and accessibility of mobility for wheelchair users.
Cycling for the body and mind
Cycling can increase our productivity. It can improve our fitness and lifestyle in this modern world.
STEERING SYSTEM PART 1.pptx
The document discusses the steering system of automobiles. It describes the main functions of the steering system as converting the rotary motion of the steering wheel into angular motion of the front wheels to negotiate turns. It lists the various components of the steering system including the steering wheel, steering column, steering gear, drop arm, ball joints, and tie rods. It also explains different types of steering gears such as worm and wheel, rack and pinion, and describes how collapsible steering columns provide protection for drivers during accidents.
PROJECT PPT.pptx
This document describes the design of a manually operated, eco-friendly sweeping machine. The machine removes dust from roads and tiles using a rotating brush powered by a chain drive mechanism. It is designed to be simple to use, requiring no battery or power source. When operated, the user pushes the machine forward while the brush rotates in the opposite direction of the wheels to collect dirt and dust in a storage bin. The machine allows for efficient cleaning of areas like roads and factories in a cost-effective and environmentally friendly manner.
Suspenstion
The suspension system connects a vehicle to its wheels using springs, shock absorbers, and linkages. It serves two main purposes - contributing to handling and braking, and protecting the vehicle and passengers from road shocks. Common suspension types include independent front suspensions like MacPherson struts and solid rear axles with leaf springs. Proper suspension provides cushioning, stability, and ride comfort while preventing excess body movement.
Mechanical Engineering Projects (power steering system )
This is mechanical engineering presentation on power steering system. In this presentation i describe basics of power steering and their history. I hope it will help you for your engineering and you can understand better about mechanical engineering.
Automated hand Brake
The handbrake is an important part of an automobile which is known as latching brake It is mostly used while parking, thus also called as parking brake.
handbrake is sometimes also used to prevent a vehicle from rolling when the operator needs both feet to operate the clutch and throttle pedals.
In automobiles e-brakes usually consist of a cable directly connected to a brake mechanism on one end and to some type of mechanism that can be actuated by the driver on the other end.
the mechanisms is often a hand–operated lever, on the floor on either side of the driver.
a pull handle located below and near the steering wheel column, or a pedal.
Hyperloop: Design, Analysis & Optimization of Chassis
This presentation aims to understand the design, analysis and optimization of the Hyperloop chassis structure , which I gained during the Hyperloop Pod Building Competition organized by SpaceX. To reduce the aerodynamic drag, Hyperloop uses a partially evacuated tube, for running the pod. The design of the structure of hyperloop pod chassis is very critical due its high speed, vibrations induced due to it and critical dynamic conditions. Also, in today's world of mass production, we cannot keep the factor of safety unnecessarily greater than needed. Also, while maintaining the safety we also must consider the material costing. it is very necessary to analyses for stresses and accordingly to optimize it. Hyperloop is a proposed mode of passenger and freight transportation that propels a capsule-like vehicle through a near-vacuum tube at more than airline speed. The pods would accelerate using a linear electric motor and glide above their track using passive magnetic levitation or air bearings. Hyperloop consists of a low-pressure tube with capsules that are transported at both low and high speeds throughout the length of the tube. The capsules are supported on a cushion of air, featuring pressurized air and aerodynamic lift. Passengers may enter and exit Hyperloop at stations located either at the ends of the tube, or branches along the tube length. It quickly becomes apparent just how dramatically the Hyperloop could change transportation, road congestion and minimize the carbon footprint globally. With the Hyperloop, extremely fast, inexpensive intercity travel would be widely accessible.
Staircase (3)
The document discusses various design ideas for a staircase lift to help disabled persons move between floors. The ideas considered and ruled out include a rolling ramp, staircase climbing wheelchair, low-cost stair climbing wheelchair, and an IIT student project called Vardaan. Reasons for ruling out the ideas included occupying too much space, needing an assistant, slow speed interrupting stair flow, and safety risks from electrical or mechanical failures. The document aims to select the most suitable design approach for a safe and effective staircase lift.
Hybrid walking bicycle
1) The document describes the design and fabrication of a treadmill bicycle. The treadmill bicycle combines a treadmill and bicycle to allow users to walk or run on a treadmill while the bicycle wheels are propelled forward.
2) The objectives are to design and fabricate the mechanism, test its performance and stability, and reduce emissions from motorized vehicles. It is intended to provide exercise and transportation for short distances while burning more calories than a standard bicycle.
3) The design incorporates a treadmill placed between the front and rear bicycle wheels. As the user walks on the treadmill, the moving belt rotates a roller connected via chain to the rear wheel, propelling the bicycle forward. Additional gears increase
More Related Content
What's hot
Self balancing vehicle.ppt BY -DINESH KR. JAIPUR
This document discusses self-balancing vehicles, specifically the Segway. It provides a brief history of transportation and defines a self-balancing vehicle as one that uses sensors, gyros, and accelerometers along with a motor to help riders balance on a single-wheeled vehicle. Examples are given of different Segway models, and the key components of the Segway like its batteries, frame, and wireless controller are described. The document explains how gyroscopes and tilt sensors allow the Segway to detect the rider's movements and maintain balance. Advantages of the Segway like reducing emissions and avoiding traffic are highlighted.
automatic wheelchair k-10655
The document proposes the design of a multi-function wheelchair that can be operated using switches and head movements to help physically disabled users gain independence. It discusses the objectives to create a lightweight and strong wheelchair with components like DPDT switches to allow forward and backward movement. The proposed design would include a wiper motor, axle, battery, and Arduino microcontroller. This new wheelchair aims to simplify daily tasks for handicapped individuals without legs or hands so they can move without assistance.
Km172 hand operated tricycle for handicapped people
Mechanical engineering project topics for final year, 1000KV Technologies, Live projects 1000kv technologies, mechatronics projects, live projects ameerpet, live projects near me, live projects institutes Hyderabad, mechanical projects hyderabad,
1000KV Technologies Live projects 9030844877, 9030844866 Educational consultant in Hyderabad, Telangana
Address: #A2, Eureka court complex, 2nd floor, kallu compound road, 2nd floor, A2 flat, image hospital near, Ameerpet, Hyderabad, Telangana 500016
Project ppt presentation (1)
The document outlines the final year project presentation for the fabrication of a solar powered wheelchair. It discusses the introduction, literature review, problem definition, objectives, components, methodology, specifications, and significance of the project. The project aims to provide independent mobility to physically disabled individuals through a solar powered wheelchair that is optimally cost effective. It discusses the various parts of the wheelchair including the solar panels, batteries, motors, wheels and castors. Market research was also conducted to source the required components.
PERFORMANCE EVALUATION OF LEANING REVERSE TRIKE
This paper presents a unique experiment based on a very small and emerging sector of automotive industry, i.e. reverse Trikes or three wheeled vehicles. A REVERSE TRIKE is a vehicle which has two wheels up front and one in the back. A reverse trike is basically a vehicle having two wheels in the front and one on rear side. Most cars have the engine driving the rear wheel and leave steering to the front ones. Some are eco-friendly human powered vehicle with a compounded electric drive system and some are powered by I.C. Engines. The incidence of accidental deaths has shown an increasing trend during the period 2003-2012 with an increase of 51.8% in the year 2012 as compared to 2002; Because of the fact that that these vehicles are very safe to drive and will be very less to become accident prone these three wheelers could be the future of the automotive sector, In the early 20th century three-wheelers gained in popularity as low-cost, lightweight vehicle that is, until about the late 1920s, when cars generally started going more along the four-wheel track. The main aim of this research paper is to evaluate the performance of a three wheeled vehicle based on leaning mechanism and to develop a transition mechanism namely tilt lock system which can transform the leaning vehicle into non- leaning and vice versa according to the requirement. The conceptual design of the project model is based on the study of several literatures related to reverse trike. The mechanisms used for available reverse trikes are very costly and electronics based. So we want to design the mechanism which can overcome the drawbacks of the existing design of a conventional vehicle and also it should take benefit of the three-wheeled transportation and it should also contain the features of an electric vehicle because it is environment friendly. Now for making the system cost effective we have incorporated mechanical leaning system in our design so as eliminate the costly electronic components. The main advantage of this mechanism is that it makes the vehicle more stable during high speed turns so that even a reverse trike can take a turn like a sports bike by leaning to its side. The results of experimental testing are presented to illustrate the real balancing performance of the combined steering and tilting approach used for the Leaning reverse trike that is very economical and fairly simple to drive. In this research it is found that the performance, handling and safety of the Leaning Reverse Trike are much better than any other commercially available three wheelers. The actual fabricated prototype is named as “KLISIâ€Â
single pedal power grinder
The multipurpose machine that is ‘exercise bicycle’ which was basically used for exercising purpose has been modified for grinding. Source of power utilized for above purpose is pedal power. the process is relatively simple, small parts of the object is small grinder, using electric drive is not conducive to energy saving. according to the above technical solution, the operator holds the part to be machined, sit on the seat cushion, two feet on the foot pedal handle and rotate the handle, the handle foot drive shaft rotates, the first drive shaft on which two sprocket rotation, the second sprocket
Solar three wheeler for disabled person
Final Year Major Project on Solar Powered Three Wheeler for Disabled Person.
The design on Solidworks and Analysis on ANSYS Multiphysics. It uses the renewable energy which is eco-friendly and very less pollution.
Design and fabrication of solar three wheeler.
What's hot (7)
Km172 hand operated tricycle for handicapped people
Km172 hand operated tricycle for handicapped people
Similar to Pneumatic bicycle .
009
The document describes a proposed 90 degree steering mechanism for vehicles. It aims to improve accessibility for disabled people by allowing vehicles to turn within very tight spaces. The mechanism uses electric motors on diagonal wheels to enable 90 degree rotations. It is intended to reduce turning radii, driver effort, and make transportation more independent for wheelchair users. Key components of the system include batteries, DC motors, toggle switches and sprockets/chains to enable the diagonal wheel rotation. The system is analyzed and advantages are noted as easier maneuverability, parking and reduced risk of accidents. It aims to improve on conventional steering mechanisms.
Design and Fabrication of Lever Propelled Wheelchair
This document describes the design and fabrication of a lever-propelled wheelchair. Key points:
- The wheelchair uses bicycle wheels and a chain/sprocket mechanism connected to levers to propel the wheels, requiring less effort than conventional push rim wheelchairs.
- The lever design transmits force more efficiently to move the wheelchair, allowing it to be used indoors and outdoors on various surfaces.
- The wheelchair was designed and modeled using CREO software, then fabricated using welding and assembly of mild steel components. Calculations were performed to determine design specifications like torque and power requirements.
- The goal was to create an affordable and accessible alternative to power wheelchairs that requires less effort
Design and Fabrication of Lever Propelled Wheelchair
This document describes the design and fabrication of a lever propelled wheelchair. It aims to provide a lower-cost alternative to powered wheelchairs that requires less effort than conventional manual wheelchairs. The design uses bicycle wheels and a chain and sprocket mechanism connected to levers to propel the wheelchair. Calculations are shown to demonstrate that this design can achieve higher velocities than a conventional wheelchair with less effort. The wheelchair was successfully tested on smooth and rough terrain. The lever design offers mechanical advantages for indoor and outdoor use at a lower cost than advanced powered wheelchairs.
Design And Implementation Electrical Wheel Chair For Disable Able To Stairs C...
This document describes the design and implementation of an electric wheelchair that has the ability to climb stairs. It uses hydraulic jacks and electrical controls to raise the chair and maintain stability while climbing stairs of various angles. The chair is powered by batteries and can be controlled automatically or manually. It was designed to be simple, low-cost, and able to carry users weighing up to 90kg. The hydraulic jacks and angle sensors allow the chair to stabilize itself and climb stairs of standard dimensions found in homes and public buildings.
self balancing unicycle ppt
This document summarizes a seminar presentation on a self-balancing unicycle. It discusses the history of unicycles originating from bicycles in the late 18th century. It then explains the key technical components of a modern self-balancing unicycle, including a gyroscope and accelerometer for balance control, a brushless DC motor for movement, lithium-ion batteries for power, and a microcontroller like an Arduino for motor control. Literature on existing unicycle designs is also reviewed. The conclusion is that initial motor tests exceeded the torque requirements for stabilization and provided a benchmark for future testing with the motor controller.
Reverse Engineering Design
This document proposes the design of a car that is accessible for people in wheelchairs. It identifies issues with current transportation options for disabled people and aims to design a vehicle that allows independent travel. Key features would include a ramp or lift to aid entry while seated in a wheelchair, controls that can be operated with hands alone, and locks to secure wheelchairs safely inside. The proposed design would be safer, more sustainable and practical than previous models by being electric, accommodating additional passengers, and providing true freedom and accessibility of mobility for wheelchair users.
Cycling for the body and mind
Cycling can increase our productivity. It can improve our fitness and lifestyle in this modern world.
STEERING SYSTEM PART 1.pptx
The document discusses the steering system of automobiles. It describes the main functions of the steering system as converting the rotary motion of the steering wheel into angular motion of the front wheels to negotiate turns. It lists the various components of the steering system including the steering wheel, steering column, steering gear, drop arm, ball joints, and tie rods. It also explains different types of steering gears such as worm and wheel, rack and pinion, and describes how collapsible steering columns provide protection for drivers during accidents.
PROJECT PPT.pptx
This document describes the design of a manually operated, eco-friendly sweeping machine. The machine removes dust from roads and tiles using a rotating brush powered by a chain drive mechanism. It is designed to be simple to use, requiring no battery or power source. When operated, the user pushes the machine forward while the brush rotates in the opposite direction of the wheels to collect dirt and dust in a storage bin. The machine allows for efficient cleaning of areas like roads and factories in a cost-effective and environmentally friendly manner.
Suspenstion
The suspension system connects a vehicle to its wheels using springs, shock absorbers, and linkages. It serves two main purposes - contributing to handling and braking, and protecting the vehicle and passengers from road shocks. Common suspension types include independent front suspensions like MacPherson struts and solid rear axles with leaf springs. Proper suspension provides cushioning, stability, and ride comfort while preventing excess body movement.
Mechanical Engineering Projects (power steering system )
This is mechanical engineering presentation on power steering system. In this presentation i describe basics of power steering and their history. I hope it will help you for your engineering and you can understand better about mechanical engineering.
Automated hand Brake
The handbrake is an important part of an automobile which is known as latching brake It is mostly used while parking, thus also called as parking brake.
handbrake is sometimes also used to prevent a vehicle from rolling when the operator needs both feet to operate the clutch and throttle pedals.
In automobiles e-brakes usually consist of a cable directly connected to a brake mechanism on one end and to some type of mechanism that can be actuated by the driver on the other end.
the mechanisms is often a hand–operated lever, on the floor on either side of the driver.
a pull handle located below and near the steering wheel column, or a pedal.
Hyperloop: Design, Analysis & Optimization of Chassis
This presentation aims to understand the design, analysis and optimization of the Hyperloop chassis structure , which I gained during the Hyperloop Pod Building Competition organized by SpaceX. To reduce the aerodynamic drag, Hyperloop uses a partially evacuated tube, for running the pod. The design of the structure of hyperloop pod chassis is very critical due its high speed, vibrations induced due to it and critical dynamic conditions. Also, in today's world of mass production, we cannot keep the factor of safety unnecessarily greater than needed. Also, while maintaining the safety we also must consider the material costing. it is very necessary to analyses for stresses and accordingly to optimize it. Hyperloop is a proposed mode of passenger and freight transportation that propels a capsule-like vehicle through a near-vacuum tube at more than airline speed. The pods would accelerate using a linear electric motor and glide above their track using passive magnetic levitation or air bearings. Hyperloop consists of a low-pressure tube with capsules that are transported at both low and high speeds throughout the length of the tube. The capsules are supported on a cushion of air, featuring pressurized air and aerodynamic lift. Passengers may enter and exit Hyperloop at stations located either at the ends of the tube, or branches along the tube length. It quickly becomes apparent just how dramatically the Hyperloop could change transportation, road congestion and minimize the carbon footprint globally. With the Hyperloop, extremely fast, inexpensive intercity travel would be widely accessible.
Staircase (3)
The document discusses various design ideas for a staircase lift to help disabled persons move between floors. The ideas considered and ruled out include a rolling ramp, staircase climbing wheelchair, low-cost stair climbing wheelchair, and an IIT student project called Vardaan. Reasons for ruling out the ideas included occupying too much space, needing an assistant, slow speed interrupting stair flow, and safety risks from electrical or mechanical failures. The document aims to select the most suitable design approach for a safe and effective staircase lift.
Hybrid walking bicycle
1) The document describes the design and fabrication of a treadmill bicycle. The treadmill bicycle combines a treadmill and bicycle to allow users to walk or run on a treadmill while the bicycle wheels are propelled forward.
2) The objectives are to design and fabricate the mechanism, test its performance and stability, and reduce emissions from motorized vehicles. It is intended to provide exercise and transportation for short distances while burning more calories than a standard bicycle.
3) The design incorporates a treadmill placed between the front and rear bicycle wheels. As the user walks on the treadmill, the moving belt rotates a roller connected via chain to the rear wheel, propelling the bicycle forward. Additional gears increase
Best Electric Unicycle ppt
The document reviews and compares 7 different electric unicycle and transporter options. It provides quick features for each option, including details like frame material, battery type, weight capacity, speed modes, wheel size, motor power, charging time, and control mechanisms. The options range from a transporter that converts to a go kart, to compact hoverboard style devices, to various self-balancing electric unicycles with Bluetooth speakers and adjustable frames.
Wheelchair Modification Design Report
This document is a design report for a wheelchair modification project. It summarizes the team's initial design concept of adding a motor and control system to convert a manual wheelchair into an electric one. The final design uses brushless hub motors mounted on the wheelchair wheels to allow for folding. A split battery platform was also designed to not interfere with folding. The team stayed within their $750 budget, spending $716.79 to integrate the motor system and controls while keeping the wheelchair portable and easy to use. Some testing was done on components individually but not on the full integrated system before completion of the report.
Suspension, steering & braking system
The document provides an overview of suspension, steering, and braking systems for automobiles. It discusses the different types of suspension systems including rigid axle, independent suspension, and McPherson strut suspension. It also describes shock absorbers, steering gears and geometry, power steering, automatic transmission, wheel alignment, hydraulic and air brakes. The key components and purposes of each system are outlined.
automatic jack
This document summarizes an automatic pneumatic jack designed by students to minimize the power needed to operate manual jacks and reduce lifting time. It aims to make lifting vehicles more comfortable for seniors and women. The pneumatic jack uses compressed air and an electrically controlled solenoid valve to provide reciprocating motion to the jack piston to lift vehicles. It has features like using compressed air that can be directly exhausted to the environment without special systems. The document describes the objective, literature review on automotive jacks and pneumatics, working details, potential components, features, future scope, and conclusions on the design.
Multi Postion Wheelchair
brief description about the project based on wheelchair used to achieve different position such as sitting, standing, reclining.
Similar to Pneumatic bicycle . (20)
Design and Fabrication of Lever Propelled Wheelchair
Design and Fabrication of Lever Propelled Wheelchair
Design and Fabrication of Lever Propelled Wheelchair
Design and Fabrication of Lever Propelled Wheelchair
Design And Implementation Electrical Wheel Chair For Disable Able To Stairs C...
Design And Implementation Electrical Wheel Chair For Disable Able To Stairs C...
Mechanical Engineering Projects (power steering system )
Mechanical Engineering Projects (power steering system )
Hyperloop: Design, Analysis & Optimization of Chassis
Hyperloop: Design, Analysis & Optimization of Chassis
Recently uploaded
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
DRUGS AND ITS classification slide share
Any substance (other than food) that is used to prevent, diagnose, treat, or relieve symptoms of a
disease or abnormal condition
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS Template 2023-2024 by: Irene S. Rueco
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
Recently uploaded (20)
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Pneumatic bicycle .
- 1. PNUMATIC BICYCLE • PROJECT REVIEW-1 • Beginning Level By •ARAVINDHA KRISHNA .B •BALAJI.G •KARTHICK.D •YOGARAJI.S •SATHAK MEERAN NAGOOR.I •SHARAN.S
- 2. What is pneumatic bicycle? • A cycle which will run with the help of air that means pneumatic system is called pneumatic bicycle.
- 3. Intro - Pneumatic Bicycle • This project is to run the bicycle without manual help, but by means of air. • The conceptual design of this model is taken from manually operated bicycle. • The complete body looks like a bicycle in which manual operation followed but this product use air, so it is called as pneumatic bicycle. • It useful for handicapped people, and also normal persons..
- 4. Idea Development • It is generally used by those who have difficulty walking or moving frequently from one place to another (Handicapped people). • Wheel chair are available in variety of designs, those intended for outdoor use, so to use it automatically this thing is developed. • This cycle is different from a manually operated wheel chair, as source of supply is air which utilize freely available air as the working medium that is to transmit power from the source to destination. • A tricycle is an air-operated one-person capacity vehicle that is specially designed for low mobility.
- 5. Previous version • In the previous version all had developed the wheel chair which will move by hand feed. • The people want to rotate the chain wheel by means o hand so then only the cycle will move.
- 6. NOW • We done the same, but we had attached the double acting cylinder, crank case to run the vehicle .
- 7. Advantage Of Pneumatic Bicycle • It is flexible and easy to drive and control due to its simple construction as that of a bicycle and light weight. • It is automatic as well as manual in operation. • In case if the automatic operation fails or discontinues in case of inadequate air supply, the operation can be switched to manual mode • It has compact structure and aesthetic shape. • It is intended for indoor and outdoor
- 8. Disadvantage Of Pneumatic Bicycle • It cannot be used for long distance. • It cannot be used effectively in uneven road conditions due to the possibility of disturbances in the alignments. • Lack of braking system. • Vibrations in the system can cause disturbances in the running mechanism.
- 9. Future Scope • In future we can use flexible seating arrangement. • In this pneumatic bicycle we can use high power motor and the secondary compressor for storage purpose in case of emergency. • We can use suspension system. • This bicycle is very flexible and can be modified according to once interest. • In future this bicycle can used for normal people and the disadvantages are rectified.
- 10. Future Scope • In future we can use flexible seating arrangement. • In this pneumatic bicycle we can use high power motor and the secondary compressor for storage purpose in case of emergency. • We can use suspension system. • This bicycle is very flexible and can be modified according to once interest. • In future this bicycle can used for normal people and the disadvantages are rectified.