Pms ppt
โขDownload as PPTX, PDFโข
1 likeโข1,510 views
The document discusses the disassembly and assembly of a tailstock, describing how to remove the base by loosening taper adjusting screws on each side, and how the tailstock spindle locking handle assembly consists of a locking handle, collar, and nut. It also explains how to remove the ball crank handle by tapping out a dowel pin, and how to tap the spindle/screw assembly toward the front of the tailstock casting using a piece of wood or mallet.
Report
Share
Report
Share
Recommended
Replacing the Batter in Your LightCap 300
The document provides step-by-step instructions for removing and replacing the battery in a flashlight. It details removing the cap screws, O-rings and other components to access the battery compartment. Instructions are given for removing the old battery, inserting a new rechargeable AA battery, and reassembling the flashlight components.
Analysis and design of tail stock assembly
The document analyzes and designs a tailstock assembly for a lathe. It describes the parts and assembly of a tailstock. It then analyzes the forces acting on the tailstock during machining operations. Based on the force analysis, it specifies dimensions for the tailstock components like the mandrel diameter, barrel length and diameter, and base dimensions. It also calculates the maximum force on the tailstock and determines the required clearance between the mandrel and barrel.
Assembly of Machine vice
Assembly of Machine vice, Computer Aided Machine Drawing (CAMD) of VTU Syllabus prepared by Hareesha N Gowda, Asst. Prof, Dayananda Sagar College of Engg, Blore. Please write to hareeshang@gmail.com for suggestions and criticisms.
PMS ppt
This document discusses performance management systems. It defines performance management as the management of organizational and individual performance. An effective system ensures goals are cascaded down and includes processes like planning, appraisals, and strategy development. It also outlines the key components of an effective performance management system like clear roles, agreed upon expectations, ongoing feedback, and making it a positive experience. The document provides details on implementing such a system, including creating evaluation formats, policies, training, and rolling out the program. It lists factors to consider in managing performance and different appraisal methods.
Laporan penyuluhan smp dan sma
Dokumen tersebut membahas tentang kenakalan remaja yang semakin marak di masyarakat. Remaja didefinisikan sebagai usia antara 13-18 tahun yang sedang dalam proses transisi menuju dewasa. Penyuluhan dilakukan untuk memberikan pemahaman tentang kesehatan remaja dan dampak negatif kenakalan remaja seperti narkoba, HIV/AIDS, kehamilan di luar nikah. Metode penyuluhan menggunakan ceramah, tanya jawab
Penyakit menular seksual
Dokumen tersebut membahas tentang penyakit menular seksual (PMS) yang meliputi definisi, contoh penyakitnya seperti HIV/AIDS dan Hepatitis B, gejala klinis, diagnosis dan pengobatannya. PMS dapat menyerang berbagai organ tubuh dan jika tidak diobati dapat menyebabkan komplikasi seperti kemandulan. Upaya pencegahan meliputi diagnosis tepat, pengobatan yang efektif, pendidikan, pemakaian kondom, pel
Infeksi Menular Seksual (IMS)
Materi ini pernah disampaikan pada saat kegiatan Sosialisasi Konselor Sebaya yang diadakan di SMA N 1 Banjarnegara pada hari Sabtu tanggal 18 Januari 2011. Pemateri nya yaitu petugas kesehatan dari PUSKESMAS 1 Banjarnegara yang dikoordinir oleh Ibu dr H.Liana Dewi selaku Kepala PUSKESMAS 1 Banjarnegara.
Recommended
Replacing the Batter in Your LightCap 300
The document provides step-by-step instructions for removing and replacing the battery in a flashlight. It details removing the cap screws, O-rings and other components to access the battery compartment. Instructions are given for removing the old battery, inserting a new rechargeable AA battery, and reassembling the flashlight components.
Analysis and design of tail stock assembly
The document analyzes and designs a tailstock assembly for a lathe. It describes the parts and assembly of a tailstock. It then analyzes the forces acting on the tailstock during machining operations. Based on the force analysis, it specifies dimensions for the tailstock components like the mandrel diameter, barrel length and diameter, and base dimensions. It also calculates the maximum force on the tailstock and determines the required clearance between the mandrel and barrel.
Assembly of Machine vice
Assembly of Machine vice, Computer Aided Machine Drawing (CAMD) of VTU Syllabus prepared by Hareesha N Gowda, Asst. Prof, Dayananda Sagar College of Engg, Blore. Please write to hareeshang@gmail.com for suggestions and criticisms.
PMS ppt
This document discusses performance management systems. It defines performance management as the management of organizational and individual performance. An effective system ensures goals are cascaded down and includes processes like planning, appraisals, and strategy development. It also outlines the key components of an effective performance management system like clear roles, agreed upon expectations, ongoing feedback, and making it a positive experience. The document provides details on implementing such a system, including creating evaluation formats, policies, training, and rolling out the program. It lists factors to consider in managing performance and different appraisal methods.
Laporan penyuluhan smp dan sma
Dokumen tersebut membahas tentang kenakalan remaja yang semakin marak di masyarakat. Remaja didefinisikan sebagai usia antara 13-18 tahun yang sedang dalam proses transisi menuju dewasa. Penyuluhan dilakukan untuk memberikan pemahaman tentang kesehatan remaja dan dampak negatif kenakalan remaja seperti narkoba, HIV/AIDS, kehamilan di luar nikah. Metode penyuluhan menggunakan ceramah, tanya jawab
Penyakit menular seksual
Dokumen tersebut membahas tentang penyakit menular seksual (PMS) yang meliputi definisi, contoh penyakitnya seperti HIV/AIDS dan Hepatitis B, gejala klinis, diagnosis dan pengobatannya. PMS dapat menyerang berbagai organ tubuh dan jika tidak diobati dapat menyebabkan komplikasi seperti kemandulan. Upaya pencegahan meliputi diagnosis tepat, pengobatan yang efektif, pendidikan, pemakaian kondom, pel
Infeksi Menular Seksual (IMS)
Materi ini pernah disampaikan pada saat kegiatan Sosialisasi Konselor Sebaya yang diadakan di SMA N 1 Banjarnegara pada hari Sabtu tanggal 18 Januari 2011. Pemateri nya yaitu petugas kesehatan dari PUSKESMAS 1 Banjarnegara yang dikoordinir oleh Ibu dr H.Liana Dewi selaku Kepala PUSKESMAS 1 Banjarnegara.
PMS presentation ppt
Performance management is a strategic and integrated approach to improving employee performance and developing capabilities. It aims to manage people in a way that drives innovation, goals, productivity and satisfaction for both employees and the organization. An effective performance management system aligns individual performance goals with organizational goals. It also balances intrinsic needs like growth and learning with extrinsic needs like rewards. Building trust, encouraging change and using appropriate measures are key principles for effective performance management.
PPT on Lathe machine
A lathe machine is used to shape materials like metal, wood, glass, and pottery by rotating the workpiece about an axis. It holds the workpiece firmly between centers or in a chuck while a cutting tool is fed into the rotating workpiece. The key components of a lathe include the bed, headstock, gear box, carriage, and tailstock. The headstock houses the spindle that rotates the workpiece while the gear box contains different sized gears to control the spindle speed.
Lesson 2 orthographic drawing - tdj3 m0
The document discusses orthographic projection drawings which are a collection of 2D drawings that accurately represent an object. It describes the six principle views used in orthographic projection including front, right side, top, bottom, left side, and rear views. The document also explains rules for orthographic drawings including choosing a front view and common view combinations. Additionally, it outlines the glass box technique, different line types, steps for creating orthographic projection drawings, and guidelines for spacing views.
Orthographic projection exercises
The document contains instructions and examples for 14 exercises related to orthographic projection. The exercises include identifying views of objects from different angles, matching orthographic drawings to isometric or oblique views, sketching projections of objects, and drawing multi-view orthographic projections of components with dimensions. Solutions or spaces for solutions are provided for each exercise.
Engineering Drawing
Engineering drawings are a graphical means of communicating technical details and specifications without language barriers. They allow engineers to visualize and understand complex objects, structures, machines and their components. Drawings use standardized conventions, symbols and techniques to represent views, dimensions, materials, scales and other technical information precisely. They serve as roadmaps for manufacturing complex products. Manual drafting skills are still important for learning fundamental principles, even as computer-aided design has streamlined the process.
Assembly drawing
CADmantra Technologies pvt. Ltd. is leading company in cad field .which are provided many types of cad couses i.e AUTOCAD,SOLIDWORK, CATIA, CRE-O, ANSYS,REVIT,STAAD.Pro and many type of courses used in tdrustial langauge
drawing
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms for those who already suffer from conditions like anxiety and depression.
Assembly of Tail stock
Assembly of Tail stock, Computer Aided Machine Drawing (CAMD) of VTU Syllabus prepared by Hareesha N Gowda, Asst. Prof, Dayananda Sagar College of Engg, Blore. Please write to hareeshang@gmail.com for suggestions and criticisms.
01 Part and assembly drawing
The document discusses key concepts for part and assembly drawings including understanding the assembly, appropriate views and details, part identification, bills of materials, and title blocks. It also outlines steps for creating detail drawings using dimensions, tolerances, surface treatments, and ensuring final understanding. The U2 methodology provides a framework for remembering the important elements of technical drawings.
Isometric projections for engineering students
The document discusses isometric projections and isometric drawing. It begins by explaining the limitations of orthographic views and how isometric projections show all three dimensions of an object in a single view. It then defines the principles and types of projection, including orthographic, pictorial, axonometric, isometric, dimetric and trimetric. The remainder of the document focuses specifically on isometric projection, defining isometric axes, lines, planes and drawings. It provides examples of how to construct isometric views of various objects from their orthographic projections.
Basic Mechanical Engineering drawing
This document provides an introduction to different types of technical drawings including orthographic projection views, sectional views, auxiliary views, and isometric drawings. It discusses topics such as dimensioning of radii, holes, countersinks, counterbores, and spot faces. Examples are provided for various types of projection views and isometric drawings. Exercises are included at the end to apply the concepts learned.
Engineering Drawing
Download link: https://www.researchgate.net/publication/318852873_Engineering_Drawing_-_I
DOI: 10.13140/RG.2.2.22512.56328
An engineering drawing is a type of technical drawing, used to fully and clearly define requirements for engineered items, and is usually created in accordance with standardized conventions for layout, nomenclature, interpretation, appearance size, etc.
Its purpose is to accurately and unambiguously capture all the geometric features of a product or a component. The end goal of an engineering drawing is to convey all the required information that will allow a manufacturer to produce that component.
Orthographic Projection
Orthographic projections provide 2D views of an object that together accurately represent it. Common views are the front, top, and side. Objects are imagined inside a glass box and each face is projected onto a plane. Dimensions are drawn with thin continuous lines and indicate sizes. Drawings include title blocks with title, author, date, scale, and other information.
Installation of High Performance Injector Seals1.1
This document provides instructions for removing an intake manifold. It lists the necessary tools and steps to disconnect the battery, remove surrounding components like the intake, ECU and battery box, and loosen the drive belt. It describes removing the power steering pump, throttle body, fuel rail shield, and brackets. It cautions working with fuel system components and relieving fuel pressure. The final steps cover removing the intake manifold bolts, fuel rail and injectors, and installing new seals on the injectors before reinstalling.
JSS Information
The document provides specifications and instructions for building a solar-powered vehicle for a Junior Solar Sprint competition. Key details include:
1) The vehicle must be no larger than 30 cm by 60 cm by 30 cm and display sponsor decals and a number. It can only be powered by sunlight and must be steered by a guide wire.
2) Detailed instructions are provided for constructing the chassis, attaching wheels and gears, and connecting the motor and solar panel.
3) Races will take place on a 20 meter track with each lane at least 60 cm wide. The guide wire will be in the center of the track 1.5 cm above the surface.
6000manual8
This document provides instructions for setting up a wheel unit and pedal unit for a driving simulator. It describes unpacking the components, assembling the wheel to the mounting bracket and table, adjusting the wheel angle, and connecting buttons and wires. It also outlines assembling the pedal unit, including attaching the frame to the base and adjusting the fore-aft position of the pedals. Detailed diagrams and part numbers are referenced to clearly explain each step of the assembly process.
Cycle
The document provides instructions for various bicycle maintenance tools and procedures, including:
1) Summarizes different hex/Allen keys, Torx keys, screwdrivers, spanners/wrenches, socket wrench sets, cone wrenches, pumps, valves, rubber repair kits, plastic rings, oil bottles, chain tools, and spoke wrenches that are useful for bicycle maintenance.
2) Describes how to patch a hole in an inner bicycle tire tube using sandpaper, glue, and a rubber patch from a repair kit.
3) Provides steps for removing and mounting a rear bicycle tire, including removing screws and spacers, taking the tire off the rim, finding
2917143 plywood-scooter
The document provides instructions for building a plywood scooter from scratch using inexpensive and readily available materials like angle iron, steel, and plywood. The scooter features a metal frame covered with a wood body and is powered by a Clinton A490 engine. It has a cruising speed of 30 mph and can travel 75 miles on a single gallon of gas. The summary provides step-by-step details on constructing and assembling the various components of the scooter frame, engine, controls, body, and finishing touches.
Hyundai r35 z 7a mini excavator service repair manual
(1) The document provides instructions for removing and installing a hydraulic pump. It describes loosening bolts and disconnecting hoses to remove the pump and drain the oil tank.
(2) It also describes installing the pump by reversing the removal steps and includes cleaning parts and bleeding air from the system.
(3) The document provides detailed parts lists and diagrams to aid in disassembling and assembling the various components of the pump such as the shaft assembly, rotary group, and gear pump. It emphasizes cleaning parts and proper installation of seals and gaskets.
Hyundai r35 z 7a mini excavator service repair manual
(1) The document provides instructions for removing and installing a hydraulic pump. It describes loosening bolts and disconnecting hoses to remove the pump and drain the oil tank.
(2) It also describes installing the pump by reversing the removal steps and includes cleaning parts and bleeding air from the system.
(3) The document lists necessary tools for disassembly and reassembly including wrenches, hammers, and jigs, and provides cautions such as preventing damage to parts and controlling torque.
More Related Content
Viewers also liked
PMS presentation ppt
Performance management is a strategic and integrated approach to improving employee performance and developing capabilities. It aims to manage people in a way that drives innovation, goals, productivity and satisfaction for both employees and the organization. An effective performance management system aligns individual performance goals with organizational goals. It also balances intrinsic needs like growth and learning with extrinsic needs like rewards. Building trust, encouraging change and using appropriate measures are key principles for effective performance management.
PPT on Lathe machine
A lathe machine is used to shape materials like metal, wood, glass, and pottery by rotating the workpiece about an axis. It holds the workpiece firmly between centers or in a chuck while a cutting tool is fed into the rotating workpiece. The key components of a lathe include the bed, headstock, gear box, carriage, and tailstock. The headstock houses the spindle that rotates the workpiece while the gear box contains different sized gears to control the spindle speed.
Lesson 2 orthographic drawing - tdj3 m0
The document discusses orthographic projection drawings which are a collection of 2D drawings that accurately represent an object. It describes the six principle views used in orthographic projection including front, right side, top, bottom, left side, and rear views. The document also explains rules for orthographic drawings including choosing a front view and common view combinations. Additionally, it outlines the glass box technique, different line types, steps for creating orthographic projection drawings, and guidelines for spacing views.
Orthographic projection exercises
The document contains instructions and examples for 14 exercises related to orthographic projection. The exercises include identifying views of objects from different angles, matching orthographic drawings to isometric or oblique views, sketching projections of objects, and drawing multi-view orthographic projections of components with dimensions. Solutions or spaces for solutions are provided for each exercise.
Engineering Drawing
Engineering drawings are a graphical means of communicating technical details and specifications without language barriers. They allow engineers to visualize and understand complex objects, structures, machines and their components. Drawings use standardized conventions, symbols and techniques to represent views, dimensions, materials, scales and other technical information precisely. They serve as roadmaps for manufacturing complex products. Manual drafting skills are still important for learning fundamental principles, even as computer-aided design has streamlined the process.
Assembly drawing
CADmantra Technologies pvt. Ltd. is leading company in cad field .which are provided many types of cad couses i.e AUTOCAD,SOLIDWORK, CATIA, CRE-O, ANSYS,REVIT,STAAD.Pro and many type of courses used in tdrustial langauge
drawing
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms for those who already suffer from conditions like anxiety and depression.
Assembly of Tail stock
Assembly of Tail stock, Computer Aided Machine Drawing (CAMD) of VTU Syllabus prepared by Hareesha N Gowda, Asst. Prof, Dayananda Sagar College of Engg, Blore. Please write to hareeshang@gmail.com for suggestions and criticisms.
01 Part and assembly drawing
The document discusses key concepts for part and assembly drawings including understanding the assembly, appropriate views and details, part identification, bills of materials, and title blocks. It also outlines steps for creating detail drawings using dimensions, tolerances, surface treatments, and ensuring final understanding. The U2 methodology provides a framework for remembering the important elements of technical drawings.
Isometric projections for engineering students
The document discusses isometric projections and isometric drawing. It begins by explaining the limitations of orthographic views and how isometric projections show all three dimensions of an object in a single view. It then defines the principles and types of projection, including orthographic, pictorial, axonometric, isometric, dimetric and trimetric. The remainder of the document focuses specifically on isometric projection, defining isometric axes, lines, planes and drawings. It provides examples of how to construct isometric views of various objects from their orthographic projections.
Basic Mechanical Engineering drawing
This document provides an introduction to different types of technical drawings including orthographic projection views, sectional views, auxiliary views, and isometric drawings. It discusses topics such as dimensioning of radii, holes, countersinks, counterbores, and spot faces. Examples are provided for various types of projection views and isometric drawings. Exercises are included at the end to apply the concepts learned.
Engineering Drawing
Download link: https://www.researchgate.net/publication/318852873_Engineering_Drawing_-_I
DOI: 10.13140/RG.2.2.22512.56328
An engineering drawing is a type of technical drawing, used to fully and clearly define requirements for engineered items, and is usually created in accordance with standardized conventions for layout, nomenclature, interpretation, appearance size, etc.
Its purpose is to accurately and unambiguously capture all the geometric features of a product or a component. The end goal of an engineering drawing is to convey all the required information that will allow a manufacturer to produce that component.
Orthographic Projection
Orthographic projections provide 2D views of an object that together accurately represent it. Common views are the front, top, and side. Objects are imagined inside a glass box and each face is projected onto a plane. Dimensions are drawn with thin continuous lines and indicate sizes. Drawings include title blocks with title, author, date, scale, and other information.
Viewers also liked (15)
Similar to Pms ppt
Installation of High Performance Injector Seals1.1
This document provides instructions for removing an intake manifold. It lists the necessary tools and steps to disconnect the battery, remove surrounding components like the intake, ECU and battery box, and loosen the drive belt. It describes removing the power steering pump, throttle body, fuel rail shield, and brackets. It cautions working with fuel system components and relieving fuel pressure. The final steps cover removing the intake manifold bolts, fuel rail and injectors, and installing new seals on the injectors before reinstalling.
JSS Information
The document provides specifications and instructions for building a solar-powered vehicle for a Junior Solar Sprint competition. Key details include:
1) The vehicle must be no larger than 30 cm by 60 cm by 30 cm and display sponsor decals and a number. It can only be powered by sunlight and must be steered by a guide wire.
2) Detailed instructions are provided for constructing the chassis, attaching wheels and gears, and connecting the motor and solar panel.
3) Races will take place on a 20 meter track with each lane at least 60 cm wide. The guide wire will be in the center of the track 1.5 cm above the surface.
6000manual8
This document provides instructions for setting up a wheel unit and pedal unit for a driving simulator. It describes unpacking the components, assembling the wheel to the mounting bracket and table, adjusting the wheel angle, and connecting buttons and wires. It also outlines assembling the pedal unit, including attaching the frame to the base and adjusting the fore-aft position of the pedals. Detailed diagrams and part numbers are referenced to clearly explain each step of the assembly process.
Cycle
The document provides instructions for various bicycle maintenance tools and procedures, including:
1) Summarizes different hex/Allen keys, Torx keys, screwdrivers, spanners/wrenches, socket wrench sets, cone wrenches, pumps, valves, rubber repair kits, plastic rings, oil bottles, chain tools, and spoke wrenches that are useful for bicycle maintenance.
2) Describes how to patch a hole in an inner bicycle tire tube using sandpaper, glue, and a rubber patch from a repair kit.
3) Provides steps for removing and mounting a rear bicycle tire, including removing screws and spacers, taking the tire off the rim, finding
2917143 plywood-scooter
The document provides instructions for building a plywood scooter from scratch using inexpensive and readily available materials like angle iron, steel, and plywood. The scooter features a metal frame covered with a wood body and is powered by a Clinton A490 engine. It has a cruising speed of 30 mph and can travel 75 miles on a single gallon of gas. The summary provides step-by-step details on constructing and assembling the various components of the scooter frame, engine, controls, body, and finishing touches.
Hyundai r35 z 7a mini excavator service repair manual
(1) The document provides instructions for removing and installing a hydraulic pump. It describes loosening bolts and disconnecting hoses to remove the pump and drain the oil tank.
(2) It also describes installing the pump by reversing the removal steps and includes cleaning parts and bleeding air from the system.
(3) The document provides detailed parts lists and diagrams to aid in disassembling and assembling the various components of the pump such as the shaft assembly, rotary group, and gear pump. It emphasizes cleaning parts and proper installation of seals and gaskets.
Hyundai r35 z 7a mini excavator service repair manual
(1) The document provides instructions for removing and installing a hydraulic pump. It describes loosening bolts and disconnecting hoses to remove the pump and drain the oil tank.
(2) It also describes installing the pump by reversing the removal steps and includes cleaning parts and bleeding air from the system.
(3) The document lists necessary tools for disassembly and reassembly including wrenches, hammers, and jigs, and provides cautions such as preventing damage to parts and controlling torque.
Nomad classic bicycle
This document provides instructions for overhauling the bearings on a Nomad mountain bike. It is a multi-step process that involves removing the rear wheel, cranks, shocks, and links. Then each bearing is removed and cleaned. New bearings are pressed in using specific tools and techniques to ensure proper alignment. Loctite and grease are applied before reassembling with the links, shocks, and installing the rear wheel.
Thunderbike Triumph Thunderbird 16/1700 Fork Cap Fitting Instructions
Instructions for fitting the Thunderbike preload and ride height fork cap kit to the Triumph Thunderbird 16/1700 and Storm
Hyundai r35 z 7a mini excavator service repair manual
This document provides instructions for removing and installing a hydraulic pump. It describes:
1. Draining the hydraulic oil from the tank and disconnecting hoses and connectors before removing the pump assembly.
2. Removing mounting bolts and socket bolts to disconnect the pump suction tube and remove the pump from the housing.
3. Tools and jigs needed for disassembly and reassembly, including various sized wrenches and screwdrivers, as well as a disassembly table and port plate jigs.
4. Cautions for disassembly and assembly, such as taking care not to drop parts and ensuring no foreign materials enter during assembly.
Hyundai hl720 3 wheel loader service repair manual
The document provides instructions for disassembling and assembling a steering unit. It includes:
1) A list of parts for the priority valve and steering unit with labeled diagrams.
2) Steps for disassembling the priority valve and steering unit which include removing screws, pins, seals, springs and other small parts.
3) Instructions for cleaning, inspecting, lubricating and assembling the priority valve and steering unit in the reverse order of disassembly. Tightening torques and hydraulic connections are also provided.
Hyundai hl720 3 wheel loader service repair manual
The document provides instructions for disassembling and assembling a steering unit. It includes:
1) A list of parts for the priority valve and steering unit with labeled diagrams.
2) Steps for disassembling the priority valve and steering unit, which includes removing screws, pins, seals, springs, and other small parts.
3) Instructions for cleaning, inspecting, lubricating, and assembling the priority valve and steering unit, replacing worn parts as needed. Tightening torques and hydraulic connections are also provided.
Hyundai hl720 3 wheel loader service repair manual
The document provides instructions for disassembling and assembling a steering unit. It includes:
1) A list of parts for the priority valve and steering unit with labeled diagrams.
2) Steps for disassembling the priority valve and steering unit, which includes removing screws, pins, seals, springs, and other small parts.
3) Instructions for cleaning, inspecting, lubricating, and assembling the priority valve and steering unit, replacing worn parts as needed. Tightening torques are provided for screws.
Hyundai hl720 3 wheel loader service repair manual
The document provides instructions for disassembling and assembling a steering unit. It includes diagrams labeling the parts and instructions for removing each component in the listed order. The components include plugs, seals, springs, balls, bushings, pins, and other internal parts. Cleaning, inspection, lubrication steps are described. Torque specifications and tightening instructions are provided for reassembly. Troubleshooting tips are included for issues like heavy steering or leakage.
Hyundai hl760 (#1001 #1301) wheel loader service repair manual
1. The document provides disassembly and assembly instructions for a priority valve and steering valve. It includes detailed steps and diagrams for removing and replacing over 30 individual parts for each valve.
2. Cleanliness is emphasized as important for both disassembly and assembly. All parts should be cleaned with solvent and lubricated with grease before reassembly.
3. Proper positioning and alignment of parts is crucial during assembly, such as aligning spring slots and ensuring pins remain horizontal. Torque specifications are provided for tightening screws.
Hyundai hl760 (#1001 #1301) wheel loader service repair manual
1. The document provides disassembly and assembly instructions for a priority valve and steering valve. It includes detailed steps and diagrams showing the parts for each.
2. The priority valve disassembly involves removing parts like the spool assembly, springs, and relief cartridge. Assembly requires cleaning parts and replacing seals before reinstalling components.
3. The steering valve disassembly requires removing parts such as the end cap, gerotor set, drive components, and spool/sleeve assembly. Assembly involves cleaning parts, replacing seals, and carefully reinstalling components like springs and pins. Proper alignment and torque settings are important.
Ch8 steering
This document provides instructions for servicing the steering components of a KYMCO XCITING 400i motorcycle. It describes removing and installing the handlebars, switch housings, and throttle. It also covers removing and installing the steering stem, including instructions for inspecting and replacing the steering bearings and races. Troubleshooting tips are provided for issues like hard steering, steering to one side, or not tracking straight.
Delphi noida training report
The document outlines the step-by-step process for changing tools on a core builder machine and fin mill machine. It involves removing old tools and inserting new tools suited for the next product to be made. Key steps include changing plates, tooling, rolls, tunnels and adjusting positions to the new specifications. The process ensures the machines are properly configured to produce the next product by swapping all relevant parts.
Hyster j006 (h6.0 ft europe) forklift service repair manual
This document provides instructions for servicing and repairing various components of a lift truck, including:
- Side covers, floor plates, seats, dashes, and hoods. Removal and installation steps are provided.
- Counterweights, mufflers, overhead guards, engines, exhaust systems, and LPG fuel tanks. Procedures for checks, repairs, and safety label installation are included.
- Frames, fuel tanks, hydraulic tanks, and counterweight mounts. Component descriptions and identification are given.
- Operator restraint systems including seat belts and hip restraints. Inspection and functionality checks are outlined.
- Hood support assemblies, hood doors, pre-cleaners, and related components
Hyster j006 (h7.0 ft europe) forklift service repair manual
The document provides instructions for servicing and repairing various components of a lift truck, including:
- Removing and installing side covers, floor plates, seats, dashes, and hood assemblies.
- Inspecting and servicing the operator restraint system including seat belts.
- Removing and installing seal plates, steering columns, and hood support assemblies.
- Guidelines for putting the lift truck on blocks for maintenance and warnings about stability.
- Diagrams illustrating the locations and attachments of different parts.
Similar to Pms ppt (20)
Installation of High Performance Injector Seals1.1
Installation of High Performance Injector Seals1.1
ย
Hyundai r35 z 7a mini excavator service repair manual
Hyundai r35 z 7a mini excavator service repair manual
ย
Hyundai r35 z 7a mini excavator service repair manual
Hyundai r35 z 7a mini excavator service repair manual
ย
Thunderbike Triumph Thunderbird 16/1700 Fork Cap Fitting Instructions
Thunderbike Triumph Thunderbird 16/1700 Fork Cap Fitting Instructions
ย
Hyundai r35 z 7a mini excavator service repair manual
Hyundai r35 z 7a mini excavator service repair manual
ย
Hyundai hl720 3 wheel loader service repair manual
Hyundai hl720 3 wheel loader service repair manual
ย
Hyundai hl720 3 wheel loader service repair manual
Hyundai hl720 3 wheel loader service repair manual
ย
Hyundai hl720 3 wheel loader service repair manual
Hyundai hl720 3 wheel loader service repair manual
ย
Hyundai hl720 3 wheel loader service repair manual
Hyundai hl720 3 wheel loader service repair manual
ย
Hyundai hl760 (#1001 #1301) wheel loader service repair manual
Hyundai hl760 (#1001 #1301) wheel loader service repair manual
ย
Hyundai hl760 (#1001 #1301) wheel loader service repair manual
Hyundai hl760 (#1001 #1301) wheel loader service repair manual
ย
Hyster j006 (h6.0 ft europe) forklift service repair manual
Hyster j006 (h6.0 ft europe) forklift service repair manual
ย
Hyster j006 (h7.0 ft europe) forklift service repair manual
Hyster j006 (h7.0 ft europe) forklift service repair manual
ย
Recently uploaded
skeleton System.pdf (skeleton system wow)
๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ
โ โุฅุถุบ ุจูู ุฅูุฏููู
โู
ู ุฃููู ุงูู
ูุงุฒู
ุงูุชู ุตู
ู
ุชูุง
ู
ูุฒู
ุฉ ุชุดุฑูุญ ุงูุฌูุงุฒ ุงูููููู (ูุธุฑู 3)
๐๐๐๐๐๐๐๐๐๐
ุชุชู
ูุฒ ูุฐูู ุงูู
ูุฒู
ุฉ ุจุนูุฏุฉ ู
ูู
ูุฒุงุช :
1- ู
ูุชุฑุฌู
ุฉ ุชุฑุฌู
ุฉ ุชููุงุณุจ ุฌู
ูุน ุงูู
ุณุชููุงุช
2- ุชุญุชูู ุนูู 78 ุฑุณู
ุชูุถูุญู ููู ููู
ุฉ ู
ูุฌูุฏุฉ ุจุงูู
ูุฒู
ุฉ (ููู ููู
ุฉ !!!!)
#ููู
_ู
ุงูู_ุฏุฑุฎ
3- ุฏูุฉ ุงููุชุงุจุฉ ูุงูุตูุฑ ุนุงููุฉ ุฌุฏุงู ุฌุฏุงู ุฌุฏุงู
4- ูููุงูู ุจุนุถ ุงูู
ุนููู
ุงุช ุชู
ุชูุถูุญูุง ุจุดูู ุชูุตููู ุฌุฏุงู (ุชูุนุชุจุฑ ูุฏู ุงูุทุงูุจ ุฃู ุงูุทุงูุจุฉ ุจุฅููุง ู
ุนููู
ุงุช ู
ูุจูู
ุฉ ูู
ุน ุฐูู ุชู
ุชูุถูุญ ูุฐูู ุงูู
ุนููู
ุงุช ุงูู
ูุจูู
ุฉ ุจุดูู ุชูุตููู ุฌุฏุงู
5- ุงูู
ูุฒู
ุฉ ุชุดุฑุญ ููุณูุง ุจ ููุณูุง ุจุณ ุชููู ุชุนุงู ุงูุฑุงูู
6- ุชุญุชูู ุงูู
ูุฒู
ุฉ ูู ุงูู ุณูุงูุฏ ุนูู ุฎุงุฑุทุฉ ุชุชุถู
ู ุฌู
ูุน ุชูุฑูุนุงุช ู
ุนููู
ุงุช ุงูุฌูุงุฒ ุงูููููู ุงูู
ุฐููุฑุฉ ูู ูุฐูู ุงูู
ูุฒู
ุฉ
ูุงุฎูุฑุงู ูุฐูู ุงูู
ูุฒู
ุฉ ุญูุงูู ุนูููู
ูุฅุชู
ูู ู
ููู
ุฅู ุชุฏุนููู ุจุงูุฎูุฑ ูุงูุตุญุฉ ูุงูุนุงููุฉ ููุท
ูู ุงูุชูููู ุฒู
ูุงุฆู ูุฒู
ููุงุชู ุ ุฒู
ูููู
ู
ุญู
ุฏ ุงูุฐูุจู ๐๐
๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ
How to Predict Vendor Bill Product in Odoo 17
This slide will guide us through the process of predicting vendor bill products based on previous purchases from the vendor in Odoo 17.
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
Temple of Asclepius in Thrace. Excavation results
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
How to deliver Powerpoint Presentations.pptx
"How to make and deliver dynamic presentations by making it more interactive to captivate your audience attention"
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Gender and Mental Health - Counselling and Family Therapy Applications and In...PsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!ย
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Whether you're new to SEO or looking to refine your existing strategies, this webinar will provide you with actionable insights and practical tips to elevate your nonprofit's online presence.
How Barcodes Can Be Leveraged Within Odoo 17
In this presentation, we will explore how barcodes can be leveraged within Odoo 17 to streamline our manufacturing processes. We will cover the configuration steps, how to utilize barcodes in different manufacturing scenarios, and the overall benefits of implementing this technology.
Recently uploaded (20)
REASIGNACION 2024 UGEL CHUPACA 2024 UGEL CHUPACA.pdf
REASIGNACION 2024 UGEL CHUPACA 2024 UGEL CHUPACA.pdf
ย
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
ย
SWOT analysis in the project Keeping the Memory @live.pptx
SWOT analysis in the project Keeping the Memory @live.pptx
ย
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
ย
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
ย
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
ย
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Gender and Mental Health - Counselling and Family Therapy Applications and In...
ย
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
ย
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
ย
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
ย
Pms ppt
- 1. To study the assembly and disassembly of tail stock
- 2. There are several ways to align a tailstock which works similar for any CNC or basic machine.
- 3. Front view of the tailstock after removal from the lathe. The tailstock is held in place on the ways by a single bolt, nut, spring and clamp base shown to the left.
- 4. The base is removed from the tailstock by simply loosening the two taper adjusting screws, one on each side of the base
- 5. The Tailstock Spindle Locking Handle Assembly consists of three parts Locking handle Tailstock Spindle Locking Collar Tailstock Spindle Locking Nut
- 6. The Ball Crank Handle is attached to the end of the Ejection/Retraction Screw with a 1/16" dowel pin. Using a small punch, tap the pin out of the handle. The handle can then be removed.
- 7. With a piece of wood scrap on the end of the Ejection/Retraction Screw, or with a small plastic mallet, tap the spindle/screw assembly out toward the front of the Tailstock casting.