PLC
•Download as PPTX, PDF•
1 like•208 views
PLC : The memory unit of a PLC is the registry where the programs are stored. The fundamental unit of memory is the word. Words are made up of bits. A bit is a single piece of data. It contains information on only two states (ON/OFF or YES/NO). Longer words contain more information within. Programs are combination of words that produce control logic. To operate the PLC system there is a need for it to access the data to be processed and instructions, that is, the program, which informs it how the data is to be processed. Both are stored in the PLC memory for access during processing.
Report
Share
Report
Share
Recommended
Plc
well it is about the basics of plc and the working of the plc and the different types of the plc manufactures in the plc plc automation in industries and in the large scale companies.
Plc presentation
A Programmable Logic Controller (PLC) or Programmable Controller is an electronic device used for Automation of industrial processes, such as control of machinery on factory assembly lines.
Introduction to PLC
This document provides an introduction to Programmable Logic Controllers (PLCs). It discusses the history and evolution of control systems from humans to relays to PLCs. The key components of a PLC including the input/output modules, central processing unit, memory, and programming terminal are described. Programming methods for PLCs such as ladder logic, Boolean expressions, and mnemonics are also introduced. Examples of using timers, counters, and internal relays in PLC programs are provided.
Programming logic controllers (plc) seminar
This document discusses programmable logic controllers (PLCs). It provides a brief history of PLCs, describing their origins in the 1960s as replacements for relay logic systems. The document outlines the typical components of a PLC system, including the processor, memory unit, power supply, input/output modules, and programming device. It also describes ladder logic, a common programming language for PLCs using a logic diagram format. Finally, some applications of PLCs in industries like manufacturing and materials handling are listed.
Plc notes
Programmable logic controllers (PLCs) are microprocessor-based devices used to monitor, control, and automate electromechanical processes. PLCs replaced hardwired relay panels and are programmed using ladder logic. A PLC consists of a central processing unit, input and output modules to interface with sensors and actuators, and a programming device. PLCs scan inputs, execute a user-written program, and update outputs to control machines and processes in a flexible, easy-to-program manner.
Programmable Logic Controllers
This is a small project on Siemens PLC Step 7 models. The project required lot of lateral thinking and logical decision making in order to develop programs for the traffic light management for the entire chandigarh city. The project is known as Total Traffic Security & Management (TTSM)
Practical Programmable Logic Controllers (PLCs) for Automation and Process Co...
This workshop is designed to benefit you with practical up-to-date information on the application of PLCs for the automation and process control of plants and factories. It is suitable for people who have little or no exposure to PLCs, but expect to become involved in some or all aspects of PLC installation. It aims to give practical advice from experts in the field, to assist you to correctly plan, program and install a PLC with a shorter learning curve and more confidence. The inventible question is which PLC is being used. We present this course focusing on the generic PLC and use the open programming IEC 61131-3 standard.
For specific examples we use the Allen Bradley range, but are not selling Allen Bradley or for that matter any other PLC! While the workshop is ideal for electricians, technicians and engineers who are new to PLCs, much of the workshop and additional material in the extensive manual will be of value to those who already have some basic skills, but need a wider perspective for larger and more challenging tasks ahead. The accompanying manual includes contributions from a number of experts and will become a valuable reference in your work. The information contained in this workshop advances from the basics to challenge even the most experienced engineer in the industry today.
WHO SHOULD ATTEND?
Consulting engineers
Design engineers
DCS personnel
Electrical engineers
Engineering managers
Instrumentation and control engineers
Instrumentation technicians
Process control engineers
Process control operators
Shift electricians
Trades staff working with or near PLCs
MORE INFORMATION: http://www.idc-online.com/content/practical-programmable-logic-controllers-plcs-automation-and-process-control-39
ppt on PLC
This document provides an overview of programmable logic controllers (PLCs). It defines a PLC as a digital computer used for industrial control systems. The document outlines the history of PLCs, their major components including the processor, power supply, and I/O modules. It describes the operational sequence of a PLC including input scan, logic solve, and output scan. Programming methods like ladder logic and functional block diagrams are discussed. Examples are provided of ladder logic programs for starting and stopping a motor. Advantages of PLCs include reliability, flexibility, and cost effectiveness. The document concludes by listing some common industrial applications of PLCs.
Recommended
Plc
well it is about the basics of plc and the working of the plc and the different types of the plc manufactures in the plc plc automation in industries and in the large scale companies.
Plc presentation
A Programmable Logic Controller (PLC) or Programmable Controller is an electronic device used for Automation of industrial processes, such as control of machinery on factory assembly lines.
Introduction to PLC
This document provides an introduction to Programmable Logic Controllers (PLCs). It discusses the history and evolution of control systems from humans to relays to PLCs. The key components of a PLC including the input/output modules, central processing unit, memory, and programming terminal are described. Programming methods for PLCs such as ladder logic, Boolean expressions, and mnemonics are also introduced. Examples of using timers, counters, and internal relays in PLC programs are provided.
Programming logic controllers (plc) seminar
This document discusses programmable logic controllers (PLCs). It provides a brief history of PLCs, describing their origins in the 1960s as replacements for relay logic systems. The document outlines the typical components of a PLC system, including the processor, memory unit, power supply, input/output modules, and programming device. It also describes ladder logic, a common programming language for PLCs using a logic diagram format. Finally, some applications of PLCs in industries like manufacturing and materials handling are listed.
Plc notes
Programmable logic controllers (PLCs) are microprocessor-based devices used to monitor, control, and automate electromechanical processes. PLCs replaced hardwired relay panels and are programmed using ladder logic. A PLC consists of a central processing unit, input and output modules to interface with sensors and actuators, and a programming device. PLCs scan inputs, execute a user-written program, and update outputs to control machines and processes in a flexible, easy-to-program manner.
Programmable Logic Controllers
This is a small project on Siemens PLC Step 7 models. The project required lot of lateral thinking and logical decision making in order to develop programs for the traffic light management for the entire chandigarh city. The project is known as Total Traffic Security & Management (TTSM)
Practical Programmable Logic Controllers (PLCs) for Automation and Process Co...
This workshop is designed to benefit you with practical up-to-date information on the application of PLCs for the automation and process control of plants and factories. It is suitable for people who have little or no exposure to PLCs, but expect to become involved in some or all aspects of PLC installation. It aims to give practical advice from experts in the field, to assist you to correctly plan, program and install a PLC with a shorter learning curve and more confidence. The inventible question is which PLC is being used. We present this course focusing on the generic PLC and use the open programming IEC 61131-3 standard.
For specific examples we use the Allen Bradley range, but are not selling Allen Bradley or for that matter any other PLC! While the workshop is ideal for electricians, technicians and engineers who are new to PLCs, much of the workshop and additional material in the extensive manual will be of value to those who already have some basic skills, but need a wider perspective for larger and more challenging tasks ahead. The accompanying manual includes contributions from a number of experts and will become a valuable reference in your work. The information contained in this workshop advances from the basics to challenge even the most experienced engineer in the industry today.
WHO SHOULD ATTEND?
Consulting engineers
Design engineers
DCS personnel
Electrical engineers
Engineering managers
Instrumentation and control engineers
Instrumentation technicians
Process control engineers
Process control operators
Shift electricians
Trades staff working with or near PLCs
MORE INFORMATION: http://www.idc-online.com/content/practical-programmable-logic-controllers-plcs-automation-and-process-control-39
ppt on PLC
This document provides an overview of programmable logic controllers (PLCs). It defines a PLC as a digital computer used for industrial control systems. The document outlines the history of PLCs, their major components including the processor, power supply, and I/O modules. It describes the operational sequence of a PLC including input scan, logic solve, and output scan. Programming methods like ladder logic and functional block diagrams are discussed. Examples are provided of ladder logic programs for starting and stopping a motor. Advantages of PLCs include reliability, flexibility, and cost effectiveness. The document concludes by listing some common industrial applications of PLCs.
Programmable Logic Controller
This Presentation provides detail description PLC basics, architecture, Programming with Case studies. Quizzes are also included in between the topics in order to measure the Learning.
6. basic of plc
The document discusses Programmable Logic Controllers (PLCs). It describes PLCs as digital electronic devices that use programmable memory to store instructions and control functions like logic, sequencing, timing, counting, and arithmetic operations to control and monitor industrial processes and machines. It discusses the advantages of PLCs like flexibility, reliability, ease of use, installation and modification. It also categorizes different types of PLCs by size and architecture, and lists common PLC manufacturers.
PLC
The document discusses programmable logic controllers (PLCs). It defines a PLC as a specialized computer used to control machines and industrial processes. PLCs can be programmed by people without computer programming skills. They work by receiving input from sensors, executing programmed logic to determine outputs, and sending output signals to control devices. PLCs have evolved from conventional computers in the 1960s-1970s and are now widely used in industrial applications like manufacturing due to benefits like flexibility, reliability, and cost effectiveness compared to custom controllers. The document outlines the main components and programming of PLCs including ladder logic.
PLC Brief
The document provides an overview of programmable logic controllers (PLCs). It discusses that PLCs are solid-state devices that can store and execute instructions to control industrial machines and processes. The history of PLCs is covered from their development in the 1960s to standardization efforts in later decades. Advantages of PLCs like easier changes and documentation are presented. The basic components and functions of a PLC including I/O modules, ladder logic, and networking are described. Examples of PLC applications and implementation tips are also included.
PLC ARCHITECTURE AND HARDWARE COMPONENTS
Explains about the basics of PLC ARCHITECTURE AND HARDWARE COMPONENTS.
A Programmable Logic Controller (PLC) is a specialized computing system used for control of industrial machines and processes.
A PLC is a computer designed to work in an industrial environment
Plc and relay system used in ntpc
This document discusses relay systems and programmable logic controllers (PLCs). It begins by explaining how a relay works using a current flowing through a coil to change the position of a switch. It then shows examples of simple relay logic circuits. The disadvantages of relay circuits are then outlined, including that they require more hardware as complexity increases. PLCs are introduced as overcoming the drawbacks of relays. The document proceeds to define a PLC and how it works using a CPU, inputs, outputs and user-written control programs. It discusses the need for PLCs and their advantages such as being compact, requiring less wiring, and being easily changeable. Leading PLC brands from America, Europe and Japan are
Nfi intro +courses
The document provides information about NFI Industrial Automation Training Academy, including its vision, mission, promoters, courses offered, and training methodology. NFI aims to bridge the skill gap between technical education and industry in India and enhance employability. It offers various online and classroom courses in industrial automation and places students in jobs. Courses cover topics like PLCs, HMIs, SCADA, VFDs, hydraulics, and more.
ppt on PLC automation
Seminar Presentation on Programmeble Logic Controller , By an Engineering Student For doing Professional Presentation like Business Presentation, Industrial Use
Programmable Logic Controller (plc)
This document provides an overview of material requirements planning (MRP). It defines MRP as a computer-based inventory management system that helps production managers schedule dependent demand items based on final product demand. The document outlines the key steps in MRP, including determining gross requirements, net requirements, and release times for items. It also lists some common benefits of MRP systems such as improved inventory planning and reduced inventory levels without compromising customer service.
PLC & SCADA
The document is a certificate certifying that Mr. Abhishek Kumar completed a one-month vocational training in advanced PLC programming and SCADA at MSME Tool Room in Jamshedpur from June 16th to July 15th under the supervision of two faculty members. It confirms that the project has not been submitted to any other university or institute for credits.
Programmable logic controllers
The document provides an introduction to programmable logic controllers (PLCs). It discusses the main components of a PLC system including discrete and analog input/output modules. Discrete modules connect simple on/off field devices while analog modules interface with devices that have continuous values like temperature, pressure etc. The document also describes the typical parts of a PLC like the central processing unit, power supply, and programming device. It explains the benefits of PLCs like ease of programming and flexibility compared to traditional relay-based control systems. Finally, the document discusses PLC programming languages and provides examples of common applications.
PLC General
The document discusses the history and evolution of programmable logic controllers (PLCs). It notes that early control systems used electromechanical relays, which were inflexible and difficult to modify. In 1968, General Motors specified the design of a new programmable controller to replace relay-based systems. This led to the development of the first PLC by Modicon in 1969. PLCs offered advantages like flexibility, ease of programming and modification, and lower power requirements compared to relay systems. The document then covers basic PLC components, memory types, input and output modules, and specifications.
Programmable logic controller
A PLC is a digitally operated electronic device that uses programmable memory to implement specific functions. It has several advantages including flexibility, easy error correction, cost effectiveness, and reliable operation. The PLC processor and memory are located in the CPU. The CPU contains fixed and alterable memory. The control unit manages input/output scanning and logic processing based on the user-written program. PLCs are commonly used in industrial manufacturing applications for process control.
PLC and Industrial Automation - Technology Overview
The document provides an overview of programmable logic controllers (PLCs) and industrial automation. It discusses PLC types, programming languages, protocols, connectivity to SCADA/HMI systems, and emerging technologies. The document also outlines an agenda covering topics like PLC selection, programming guidelines, industrial automation hierarchies, and the integration of PLCs with technologies like IoT, cloud computing, and augmented reality.
PLC TRAINING
Deep Tech System No1 Institute for providing plc training in Delhi NCR. We offer PLC programming training a wide scope to gain good knowledge in automation industrial training with extensive lab facilities.
Plc seminar abu
This document provides an overview of programmable logic controllers (PLCs). It discusses what a PLC is, the history and major components of PLCs, programming methods like ladder logic, and examples of how PLCs can be used to start and stop motors. The document also outlines some key advantages of PLCs, such as reliability, flexibility, cost effectiveness, and ease of maintenance, as well as potential disadvantages. Finally, it discusses common applications of PLCs in various industrial automation settings like manufacturing, materials handling, and machine tools.
Plc syllabus
The document outlines the syllabus for a PLC Automation course. The syllabus covers 4 units: 1) Introduction to Automation, 2) Automation Components, 3) PLC (Programmable Logic Controller), and 4) Allen Bradley PLC. Unit 1 introduces automation concepts. Unit 2 covers components like relays, switches, sensors and actuators. Unit 3 provides an overview of PLC systems including architecture, memory, I/O, scanning, programming and applications. Unit 4 focuses on Allen Bradley PLCs, addressing configuration, software, and programming instructions. The contact information at the end advertises career development and placement services for courses in PCB design, embedded systems, PLC automation, and simulation
Ladder Logic and Touch Screen PLC Programming Tutorial/Training
Ladder Logic is widely used control functions, is a programming language based on boolean expressions and is represented by graphical relay logic diagrams. Our touch screen controllers can be programmed in both C Language and and Ladder Logic, comes with free HMIWorks Development Environment and Demo Programs. We provide free programming services for small and large projects.
Learn more: http://www.icpdas-usa.com/newsletters/Ladder-Logic-Touch-Screen-PLC-Programming.php?r=slideshare
Learn PLC Programming Free - A Beginners Guide
PLC Beginner’s Guide to PLC Programming
There are many different PLC manufacturers with different hardware and software. All of the programmable logic controllers have similar basic features. Here is how I would approach learning about basic PLCs.
What’s new with Windows Azure / Karl Ots @ AppTalk Tampere
Cloud computing patterns allow organizations to leverage cloud infrastructure in new ways. One such pattern is reserving instances over 500 miles away to ensure resources are available in different geographic regions. Reserved instances provide discounts for reserving instances long-term.
C:\Users\Javi\Documents\Documentos De Word Javi\Lola\Treball Cartes Dhivern P...
C:\Users\Javi\Documents\Documentos De Word Javi\Lola\Treball Cartes Dhivern P...conselleria educacion
cartes d'hivernNetworkSecurity.ppt
The document proposes two solutions for secure internet banking authentication - one based on short-time passwords using smart cards and symmetric cryptography, and the other based on digital certificates. It discusses attacks on authentication like offline credential stealing and online channel breaking. The short-time password solution involves the user copying a response from their smart card to a bank login form. The certificate-based solution establishes an SSL/TLS channel without client authentication initially, then uses the user's certificates once their smart card is available in the browser. Both solutions offer high security against common attacks, and the certificate solution is attractive for the future with changing legislation and widespread e-IDs.
More Related Content
What's hot
Programmable Logic Controller
This Presentation provides detail description PLC basics, architecture, Programming with Case studies. Quizzes are also included in between the topics in order to measure the Learning.
6. basic of plc
The document discusses Programmable Logic Controllers (PLCs). It describes PLCs as digital electronic devices that use programmable memory to store instructions and control functions like logic, sequencing, timing, counting, and arithmetic operations to control and monitor industrial processes and machines. It discusses the advantages of PLCs like flexibility, reliability, ease of use, installation and modification. It also categorizes different types of PLCs by size and architecture, and lists common PLC manufacturers.
PLC
The document discusses programmable logic controllers (PLCs). It defines a PLC as a specialized computer used to control machines and industrial processes. PLCs can be programmed by people without computer programming skills. They work by receiving input from sensors, executing programmed logic to determine outputs, and sending output signals to control devices. PLCs have evolved from conventional computers in the 1960s-1970s and are now widely used in industrial applications like manufacturing due to benefits like flexibility, reliability, and cost effectiveness compared to custom controllers. The document outlines the main components and programming of PLCs including ladder logic.
PLC Brief
The document provides an overview of programmable logic controllers (PLCs). It discusses that PLCs are solid-state devices that can store and execute instructions to control industrial machines and processes. The history of PLCs is covered from their development in the 1960s to standardization efforts in later decades. Advantages of PLCs like easier changes and documentation are presented. The basic components and functions of a PLC including I/O modules, ladder logic, and networking are described. Examples of PLC applications and implementation tips are also included.
PLC ARCHITECTURE AND HARDWARE COMPONENTS
Explains about the basics of PLC ARCHITECTURE AND HARDWARE COMPONENTS.
A Programmable Logic Controller (PLC) is a specialized computing system used for control of industrial machines and processes.
A PLC is a computer designed to work in an industrial environment
Plc and relay system used in ntpc
This document discusses relay systems and programmable logic controllers (PLCs). It begins by explaining how a relay works using a current flowing through a coil to change the position of a switch. It then shows examples of simple relay logic circuits. The disadvantages of relay circuits are then outlined, including that they require more hardware as complexity increases. PLCs are introduced as overcoming the drawbacks of relays. The document proceeds to define a PLC and how it works using a CPU, inputs, outputs and user-written control programs. It discusses the need for PLCs and their advantages such as being compact, requiring less wiring, and being easily changeable. Leading PLC brands from America, Europe and Japan are
Nfi intro +courses
The document provides information about NFI Industrial Automation Training Academy, including its vision, mission, promoters, courses offered, and training methodology. NFI aims to bridge the skill gap between technical education and industry in India and enhance employability. It offers various online and classroom courses in industrial automation and places students in jobs. Courses cover topics like PLCs, HMIs, SCADA, VFDs, hydraulics, and more.
ppt on PLC automation
Seminar Presentation on Programmeble Logic Controller , By an Engineering Student For doing Professional Presentation like Business Presentation, Industrial Use
Programmable Logic Controller (plc)
This document provides an overview of material requirements planning (MRP). It defines MRP as a computer-based inventory management system that helps production managers schedule dependent demand items based on final product demand. The document outlines the key steps in MRP, including determining gross requirements, net requirements, and release times for items. It also lists some common benefits of MRP systems such as improved inventory planning and reduced inventory levels without compromising customer service.
PLC & SCADA
The document is a certificate certifying that Mr. Abhishek Kumar completed a one-month vocational training in advanced PLC programming and SCADA at MSME Tool Room in Jamshedpur from June 16th to July 15th under the supervision of two faculty members. It confirms that the project has not been submitted to any other university or institute for credits.
Programmable logic controllers
The document provides an introduction to programmable logic controllers (PLCs). It discusses the main components of a PLC system including discrete and analog input/output modules. Discrete modules connect simple on/off field devices while analog modules interface with devices that have continuous values like temperature, pressure etc. The document also describes the typical parts of a PLC like the central processing unit, power supply, and programming device. It explains the benefits of PLCs like ease of programming and flexibility compared to traditional relay-based control systems. Finally, the document discusses PLC programming languages and provides examples of common applications.
PLC General
The document discusses the history and evolution of programmable logic controllers (PLCs). It notes that early control systems used electromechanical relays, which were inflexible and difficult to modify. In 1968, General Motors specified the design of a new programmable controller to replace relay-based systems. This led to the development of the first PLC by Modicon in 1969. PLCs offered advantages like flexibility, ease of programming and modification, and lower power requirements compared to relay systems. The document then covers basic PLC components, memory types, input and output modules, and specifications.
Programmable logic controller
A PLC is a digitally operated electronic device that uses programmable memory to implement specific functions. It has several advantages including flexibility, easy error correction, cost effectiveness, and reliable operation. The PLC processor and memory are located in the CPU. The CPU contains fixed and alterable memory. The control unit manages input/output scanning and logic processing based on the user-written program. PLCs are commonly used in industrial manufacturing applications for process control.
PLC and Industrial Automation - Technology Overview
The document provides an overview of programmable logic controllers (PLCs) and industrial automation. It discusses PLC types, programming languages, protocols, connectivity to SCADA/HMI systems, and emerging technologies. The document also outlines an agenda covering topics like PLC selection, programming guidelines, industrial automation hierarchies, and the integration of PLCs with technologies like IoT, cloud computing, and augmented reality.
PLC TRAINING
Deep Tech System No1 Institute for providing plc training in Delhi NCR. We offer PLC programming training a wide scope to gain good knowledge in automation industrial training with extensive lab facilities.
Plc seminar abu
This document provides an overview of programmable logic controllers (PLCs). It discusses what a PLC is, the history and major components of PLCs, programming methods like ladder logic, and examples of how PLCs can be used to start and stop motors. The document also outlines some key advantages of PLCs, such as reliability, flexibility, cost effectiveness, and ease of maintenance, as well as potential disadvantages. Finally, it discusses common applications of PLCs in various industrial automation settings like manufacturing, materials handling, and machine tools.
Plc syllabus
The document outlines the syllabus for a PLC Automation course. The syllabus covers 4 units: 1) Introduction to Automation, 2) Automation Components, 3) PLC (Programmable Logic Controller), and 4) Allen Bradley PLC. Unit 1 introduces automation concepts. Unit 2 covers components like relays, switches, sensors and actuators. Unit 3 provides an overview of PLC systems including architecture, memory, I/O, scanning, programming and applications. Unit 4 focuses on Allen Bradley PLCs, addressing configuration, software, and programming instructions. The contact information at the end advertises career development and placement services for courses in PCB design, embedded systems, PLC automation, and simulation
Ladder Logic and Touch Screen PLC Programming Tutorial/Training
Ladder Logic is widely used control functions, is a programming language based on boolean expressions and is represented by graphical relay logic diagrams. Our touch screen controllers can be programmed in both C Language and and Ladder Logic, comes with free HMIWorks Development Environment and Demo Programs. We provide free programming services for small and large projects.
Learn more: http://www.icpdas-usa.com/newsletters/Ladder-Logic-Touch-Screen-PLC-Programming.php?r=slideshare
Learn PLC Programming Free - A Beginners Guide
PLC Beginner’s Guide to PLC Programming
There are many different PLC manufacturers with different hardware and software. All of the programmable logic controllers have similar basic features. Here is how I would approach learning about basic PLCs.
What's hot (19)
PLC and Industrial Automation - Technology Overview
PLC and Industrial Automation - Technology Overview
Ladder Logic and Touch Screen PLC Programming Tutorial/Training
Ladder Logic and Touch Screen PLC Programming Tutorial/Training
Viewers also liked
What’s new with Windows Azure / Karl Ots @ AppTalk Tampere
Cloud computing patterns allow organizations to leverage cloud infrastructure in new ways. One such pattern is reserving instances over 500 miles away to ensure resources are available in different geographic regions. Reserved instances provide discounts for reserving instances long-term.
C:\Users\Javi\Documents\Documentos De Word Javi\Lola\Treball Cartes Dhivern P...
C:\Users\Javi\Documents\Documentos De Word Javi\Lola\Treball Cartes Dhivern P...conselleria educacion
cartes d'hivernNetworkSecurity.ppt
The document proposes two solutions for secure internet banking authentication - one based on short-time passwords using smart cards and symmetric cryptography, and the other based on digital certificates. It discusses attacks on authentication like offline credential stealing and online channel breaking. The short-time password solution involves the user copying a response from their smart card to a bank login form. The certificate-based solution establishes an SSL/TLS channel without client authentication initially, then uses the user's certificates once their smart card is available in the browser. Both solutions offer high security against common attacks, and the certificate solution is attractive for the future with changing legislation and widespread e-IDs.
Retirement Plans: 10 Things You Should Know
This document provides a summary of 10 key things to know about retirement plans such as 401(k)s and IRAs. It notes that retirement plans are protected from creditors up to $1 million, nearly half of workers cash out 401(k)s when changing jobs, and you can withdraw from 401(k)s after age 55 without penalty if retiring, though income taxes still apply. It also discusses Roth 401(k)s, continuing retirement contributions post-retirement, rollover options, Americans' expectations for retirement, and recommended websites for retirement planning information.
Social Stream Draft v1 Duy Doan
The document discusses key aspects of a social stream that is at the core of social networks. A social stream allows members to broadcast information, update information from friends, connect and react to friends, and find old and new friends. It must have features to allow people to post, comment, share, and find suggestions. Posts can be thoughts, links, videos, pictures, or blogs to share with others. Comments are conversations that allow the social network to stick, but comments must be designed carefully to allow for formatting, replies at different levels, and fitting identities. Sharing is the ultimate power of social media as it allows information to spread virally in a geometric series.
Geotermikus energia projektek Toskánában és Magyarországon
Short presentation of my thesis on geothermal energy in Hungary and Tuscany - Budapest May 2010
Campbell River Community Meeting October 22, 2013
This document summarizes a community meeting that was held in Campbell River, BC on October 22, 2013 regarding the North Island Hospitals Project. The meeting agenda covered the project description and timelines, site preparation work, the request for proposal evaluation process, design progress, clinical and community engagement, community benefits, and Aboriginal employment opportunities. Key details included the scope and budget for the new Campbell River Hospital, the project schedule from 2013-2017, site work being done to prepare for construction, and expectations around delivering high quality facilities on time and on budget.
RMIT Vietnam - Managerial Finance - Efficient Market Hypothesis - Week 9
1. The document discusses how stock prices reflect all available information in the market and how efficiently markets incorporate new information. It examines the concepts of weak, semi-strong, and strong forms of market efficiency.
2. Event studies are discussed as tests of semi-strong form efficiency that generally support the view that markets quickly and accurately respond to new public information. However, evidence suggests markets may have some foresight into future information.
3. While strong form efficiency says prices reflect all public and private information, evidence shows insider trading can be profitable, suggesting prices do not fully reflect private information.
St.George's Acquisition by Westpac Analysis
HotK team's Analysis on the St.George Acquisition by Westpac. The time in the presentation was set at April 2008. The information is our view and does not necessarily reflect what would have happened after April 2008.
Geothermal Energy Potential - Nevada
Geothermal energy has significant potential in Nevada to provide clean, renewable electricity and heat. The document discusses Nevada's geothermal power and direct use potential. Specifically, geothermal resources could supply 45% of the state's electricity needs and three-fourths of its heating needs. Developing geothermal energy could create jobs, boost the economy, reduce carbon emissions, and provide reliable, locally produced baseload power and heat for decades to come.
Geothermal Energy Potential - Oregon
The free state-by-state guides walk through the benefits and uses of three major types of geothermal applications: power generation, direct use and heat pumps.
How to use Facebook as a Social Customer Relationship Management tool for FREE
This document provides guidance on using Facebook as a free customer relationship management tool. It recommends creating a Facebook page for a business to share content like photos, videos and links. The document also suggests using groups, events and messages to engage customers and observe consumer trends. However, it warns against spam-like behaviors and notes that Facebook cannot replace a full CRM system for functions like deal tracking and integration.
La influencia de la literatura universal en los videojuegos
Trabajo realizado por Raúl Cordón Martínez, Guillermo Jiménez Mora, Ismael Morón EL-Khalifi, Alejandro Ortiz Escribano
C2 Doyeon Kim
GEORG Geothermal Workshop 2016
Presentation Title: Magma Imaging beneath Krafla using Virtual Reflection Profiling
C1 Knútur Árnason
GEORG Geothermal Workshop 2016
Presentation title: A conceptual model of the Krafla volcanic geothermal system
C1 Guðjón Helgi Eggertsson
GEORG Geothermal Workshop 2016
Presentation title: Mechanical and permeability properties of the Krafla reservoir lithology
New Word Formation
PowerPoint presentation with audio (17:17) describing new word formation in English. Discussion includes new words from brand names, shortenings, root creations, acronyms, derivations, compounding, loan words, etc.
Hist Petr Expl U of Myanmar_SEAPEXhouston23Jun2016pptx
This document provides a summary of the regional tectonics, structure, and history of petroleum exploration in Myanmar from 905 AD to present. It discusses the major basins in Myanmar including the Central Burma Basin where hand-dug wells have been extracting oil since 905 AD. The Central Burma Basin contains multiple anticlinal oil fields along with the prolific Mann Field discovered seismically. Exploration has occurred across multiple basins with varied success, identifying potential remaining exploration opportunities while also noting challenges around tight reservoirs and charge limitations.
La mitología en las sagas de Percy Jackson y los dioses del Olimpo y Los héro...
La mitología en las sagas de Percy Jackson y los dioses del Olimpo y Los héro...Mercedes Pardo Céspedes
Trabajo sobre el autor Rick Riordan y sus sagas de Percy Jackson basadas en la mitología griega y romana, realizado por los alumnos Belén Burruecos Suárez, Verania Montenegro Casaus, Carlos Ramos Gamero, Isabella Reyes Fernández y Sofía Segura Sánchez del Pozo del IES Los Colegiales en la asignatura de Literatura UniversalViewers also liked (20)
What’s new with Windows Azure / Karl Ots @ AppTalk Tampere
What’s new with Windows Azure / Karl Ots @ AppTalk Tampere
C:\Users\Javi\Documents\Documentos De Word Javi\Lola\Treball Cartes Dhivern P...
C:\Users\Javi\Documents\Documentos De Word Javi\Lola\Treball Cartes Dhivern P...
Geotermikus energia projektek Toskánában és Magyarországon
Geotermikus energia projektek Toskánában és Magyarországon
RMIT Vietnam - Managerial Finance - Efficient Market Hypothesis - Week 9
RMIT Vietnam - Managerial Finance - Efficient Market Hypothesis - Week 9
How to use Facebook as a Social Customer Relationship Management tool for FREE
How to use Facebook as a Social Customer Relationship Management tool for FREE
La influencia de la literatura universal en los videojuegos
La influencia de la literatura universal en los videojuegos
Hist Petr Expl U of Myanmar_SEAPEXhouston23Jun2016pptx
Hist Petr Expl U of Myanmar_SEAPEXhouston23Jun2016pptx
La mitología en las sagas de Percy Jackson y los dioses del Olimpo y Los héro...
La mitología en las sagas de Percy Jackson y los dioses del Olimpo y Los héro...
Similar to PLC
Plc presentation
This document provides an overview of programmable logic controllers (PLCs). It discusses what a PLC is, common PLC brands and software, PLC components and operation, programming languages, uses of HMIs and SCADA systems, differences between PLCs and computers, why PLCs are used, their advantages, and common application areas. The document also describes an industrial automation company and its PLC training and services.
Simulation and Implementation of PLC Based for Detecting Burned Potato Chips ...
This paper describes about to use the PLC techniques for automation of industrial product manufacturing to achieve high throughput and improved quality and consistency. In this system, PLC is used the heart of the system. Light dependent sensor, push button switch, light source, conveyor and blower is controlled by PLC. The proposed system of operation is devised by ladder diagram. Software implementation is used for demonstrating the ease of operation with this control along with tuning of the entire system is offered. This paper presents a study by simulation and experimental models for proposed system of PLCs. In this paper, consideration was given to the design of an HMI for an automated burn chips removed from conveyor which can be operated automatically by the press of start buttons. The design stages included screen interfacing for the HMI, programming the HMI by assigning tags, integration into Step 7 brand of PLC using Ethernet, simulation of the program using "PLCSIM" and the programming codes of the automated burn chips. The designed HMI will be useful to manufacturing industries having industrial automated systems. Htet Htet Aung | Thu Zar Thein "Simulation and Implementation of PLC Based for Detecting Burned Potato Chips and Remove using PLCSIM and HMI" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26724.pdf Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26724/simulation-and-implementation-of-plc-based-for-detecting-burned-potato-chips-and-remove-using-plcsim-and-hmi/htet-htet-aung
PLC (programmable logic controllers) RTD and CNC PPT- powerpoint presentation...
For free download Subscribe to https://www.youtube.com/channel/UCTfiZ8qwZ_8_vTjxeCB037w and Follow https://www.instagram.com/fitrit_2405/ then please contact +91-9045839849 over WhatsApp.
Programmable Logic Controller (PLC) is a specialized computing system used for control of industrial machines and processes.
Use of plc in industrial automation
The document discusses the history and use of programmable logic controllers (PLCs) in industrial automation. It notes that PLCs were first specified in 1968 by General Motors to provide a solid-state, reusable system for controlling industrial processes more flexibly than relay-based systems. A PLC consists of a central processing unit, power supply, programming unit, memory, and input/output interfacing circuitry. It scans inputs, executes user-programmed logic instructions, and updates outputs on a continuous cycle. Common programming methods for PLCs include ladder logic, functional block diagrams, and structured text. PLCs communicate with field devices and one another using various interfaces and protocols.
PLC presentation
Programmable Logic Controllers (PLCs) were developed to control industrial machinery in a programmable and reliable way. A PLC has a processor that executes stored instructions to control inputs and outputs based on ladder logic programming. It includes a power supply, memory to store the user program, and I/O modules to interface with field devices. PLCs offer advantages over hardwired control systems like easier programming, flexibility, and communication capabilities. They are used widely in industrial applications for tasks like sequencing, timing, counting, and analog control.
Elements of Industrial Automation Week 02 Notes.pdf
Select a suitable Sensor / Switch for a given Process Variable and activate
• Selection of Sensor/Transducer – 10 Marks
• Activation and Result –20Marks
OR
Select a suitable motor for the given case and energize
• Selection of the Motor – 10 Marks
• Energize and Result – 20 Marks
Device and Simulate a ladder diagram for the given Case Study
• Writing Ladder Program –30 Marks
• Simulate and Troubleshoot –20 Marks
Components of a PLC..pdf
PLC or a Programmable Logic Controller is a specialized computer that is used to control industrial processes.
Programming logic controllers (plc)
This document provides an overview of programmable logic controllers (PLCs). It discusses the history of PLCs, the need for them to replace hardwired control panels, and defines a PLC as a specialized computer used for industrial machine and process control. The key components of a PLC are described as the processor, memory, power supply, I/O modules, and programming device. Advantages include less wiring, increased reliability, and flexibility, while disadvantages include proprietary architectures. PLCs are widely used to control industrial applications and machinery.
Programmable Logic Controllers Paper (PLC) SM54
This document discusses programmable logic controllers (PLCs). It begins by defining a PLC as a digitally operating electronic apparatus that uses programmable memory to implement logic, sequencing, timing and other functions to control machines and processes. The document then describes the basic components of a PLC, including I/O modules, a processor, power supply, memory unit and network interface. It explains how PLCs are programmed using programming units connected to computers and the transfer of programs to PLC memory using EEPROM chips.
EE415 LT 1.pptxDFHDFHDFHHFDDFHFDHDFHDFHF
The document provides an introduction to programmable logic controllers (PLCs), including:
1) PLCs can control sequences of events, maintain variables constant, or follow prescribed changes, like an automatic drilling machine.
2) Early controllers were hard-wired but PLCs use a microprocessor and programming to control machines.
3) PLCs have inputs that receive sensor signals, processing and memory, and outputs that control devices like motors and valves. They can easily be reprogrammed for different tasks.
Plc on cnc
Training report prepared on PLC on CNC at BHEL,Hyderabad. It have sufficient slides to know the basics about PLC on CNC and working of that with coding. It was worth learning on BHEL.
Summer Internship Report on PLC
The document provides information about an industrial training project completed by Sudeep Giri at Insulators and Electricals Ltd. It includes an acknowledgement, preface, and table of contents. The content covers topics like the company background, software used, automation, PLC components, programming languages, and a motor start/stop example. It aims to describe PLC programming through ladder logic based on the training received.
Summer Internship Report For PLC Programming of Traffic light through Ladder ...
For free download Subscribe to https://www.youtube.com/channel/UCTfiZ8qwZ_8_vTjxeCB037w and Follow https://www.instagram.com/fitrit_2405/ then please contact +91-9045839849 over WhatsApp.
An industrial PLCs system is used for the development of the controls of machinery. This paper describes the PLCs systems in terms of their architecture, their interface to the process hardware, the functionality and the application development facilities they provide. Some attention is also paid to the industrial standards to which they abide their planned evolution as well as the potential benefits of their use. Ladder Logic is a graphical programming language, initially programmed with simple contacts that simulates the opening and closing of relays. Ladder Logic programming has been expanded to include functions such as Counters, Timers, shift Registers and math operations. Ladder logic is a method of drawing electrical logic schematics. It is now a graphical language very popular for programming Programmable Logic Controllers (PLCs). It was originally invented to describe logic made from relays. The name is based on the observation that programs in this language resemble ladders, with two vertical "rails" and a series of horizontal "rungs" between them.
Electrical Training in Mohali
In olden days for controlling the manufacturing processes relays were used. Because of excessive consumption of power it is difficult to figure out the linked problems with it, therefore it must be regularly replaced. To solve the problems, Programmable Logic Controller was unveiled. For more information join the electrical automation course to make your career in this field.
Electrical Training in Chandigarh
In olden days for controlling the manufacturing processes relays were used. Because of excessive consumption of power it is difficult to figure out the linked problems with it, therefore it must be regularly replaced. To solve the problems, Programmable Logic Controller was unveiled. For more information join the electrical automation course to make your career in this field.
Unit 5 Use of PLC.pptx
A programmable logic controller (PLC) uses a programmable memory to store instructions for controlling machines and processes. It monitors inputs, executes logic functions, and controls outputs to automate industrial processes. The PLC consists of a central processing unit, input/output modules, power supply, and programming devices. It provides flexibility to change control programs easily compared to rewiring relay panels.
module 1.pptx
The document discusses programmable logic controllers (PLCs) and their components and applications. It defines a PLC as a solid-state industrial controller that performs logic functions to control machines and processes. The key components of a PLC include input/output modules that interface with field devices, a processor with memory and programming capabilities, and a power supply. PLCs can be unitary or modular in design. They are widely used in industrial automation to control functions like conveyor systems. The document outlines the history, advantages, and types of PLCs as well as their programming and applications in industrial processes.
Electrical Training in Jalandhar
In olden days for controlling the manufacturing processes relays were used. Because of excessive consumption of power it is difficult to figure out the linked problems with it, therefore it must be regularly replaced. To solve the problems, Programmable Logic Controller was unveiled. For more information join the electrical automation course to make your career in this field.
Electrical Training in Ludhiana
In olden days for controlling the manufacturing processes relays were used. Because of excessive consumption of power it is difficult to figure out the linked problems with it, therefore it must be regularly replaced. To solve the problems, Programmable Logic Controller was unveiled. For more information join the electrical automation course to make your career in this field.
PL C
A programmable logic controller (PLC) is a solid-state device that performs logic functions previously done by electromechanical relays. It uses a microprocessor and memory to make logical decisions and control machinery through inputs and outputs. PLCs are programmed using ladder logic and other languages. They are widely used in industry for automation and process control applications.
Similar to PLC (20)
Simulation and Implementation of PLC Based for Detecting Burned Potato Chips ...
Simulation and Implementation of PLC Based for Detecting Burned Potato Chips ...
PLC (programmable logic controllers) RTD and CNC PPT- powerpoint presentation...
PLC (programmable logic controllers) RTD and CNC PPT- powerpoint presentation...
Elements of Industrial Automation Week 02 Notes.pdf
Elements of Industrial Automation Week 02 Notes.pdf
Summer Internship Report For PLC Programming of Traffic light through Ladder ...
Summer Internship Report For PLC Programming of Traffic light through Ladder ...
Recently uploaded
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Recently uploaded (20)
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Monitoring Java Application Security with JDK Tools and JFR Events
Monitoring Java Application Security with JDK Tools and JFR Events
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
A tale of scale & speed: How the US Navy is enabling software delivery from l...
A tale of scale & speed: How the US Navy is enabling software delivery from l...
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
PLC
- 1. MAKE A CAREER IN PLC?? http://www.techportsolutions.in/
- 2. DEVELOPING AND DESIGNING HMI&DCS/PLC SYSTEMS Design and configuration of PLC systems within Control systems Lab provide students both from Control and Computer Science Departments with an opportunity to learn selection, programming, operation, and capabilities/limitations of programmable logic controllers and human machine interface (HMI) software based on networked PC to provide necessary connection between human user (Operator, process engineer ) and PLC integrated with plant and process data. http://www.techportsolutions.in/
- 3. DEVELOPING AND DESIGNING PLC http://www.techportsolutions.in/
- 4. BASIC PLC HARDWARE ARCHITECTURE The PLC consists of the following components: •The processor module (CPU) •Memory •The power supply, •and the Input/output modules. http://www.techportsolutions.in/
- 5. The memory unit of a PLC is the registry where the programs are stored. The fundamental unit of memory is the word. Words are made up of bits. A bit is a single piece of data. It contains information on only two states (ON/OFF or YES/NO). Longer words contain more information within. Programs are combination of words that produce control logic. To operate the PLC system there is a need for it to access the data to be processed and instructions, that is, the program, which informs it how the data is to be processed. Both are stored in the PLC memory for access during processing. PLC MEMORY http://www.techportsolutions.in/
- 6. I/O modules physically connect to field devices, that is they provides the interface between the system and the outside world, allowing for connections to be made through input/output channels to input devices. Since there are different types of input and output devices, the process determines the type of input or output module selected, digital or analog. INPUT OUTPUT MODELS http://www.techportsolutions.in/
- 7. OUR CLIENTS : For Your Reference !! * * Kranti SSK , Kundal * * Vishwas SSk,Shripur * * Vitthal SSK,Pandharpur ** Vitthalrao Shinde SSk,Madha ** Manjara SSk,Lature Baramati Agro,Shetphalgadhe ** Baramati Agro ,Kannad * * Saswad Mali,Malinagar CONTACT : Sales: +91 738 710 0147 Tech Support: +91 738 710 0146 Office: 020 65330999 Email: info@techportsolutions.in http://www.techportsolutions.in/