Plant Conditioner - Humidity, Light intensity,& Temperature measurement tools
•Download as PPTX, PDF•
0 likes•54 views
This document describes a plant conditioner created by a group of 3 students - M. Ridwan M., M. Iqbal, and Yasmine N. Afifah. The plant conditioner uses an Arduino Uno to measure the temperature, light intensity, and humidity of a plant or environment using sensors like the LM35, LDR, and DHT11. It has advantages like providing information on a plant's status to give it the right treatment to maximize growth or estimating the suitable plants for an environment.
Report
Share
Report
Share
Recommended
plant conditiona Ppt sispeng
This document describes a plant conditioner tool created by a group of 3 students - M. Ridwan M., M. Iqbal, and Yasmine N. Afifah. The plant conditioner uses an Arduino UNO to measure the temperature, light intensity, and humidity of plants and environments using sensors like the LM35, LDR, and DHT11. It displays the readings to help provide plants with the right treatment and environment to maximize their growth.
Plant Conditioner
This document describes a plant conditioner tool created by Kelompok 8 members M. Ridwan M., M. Iqbal, and Yasmine N. Afifah. The Arduino-based tool measures the temperature, light intensity, and humidity of plants and environments. It provides information on a plant's status to optimize its growth through proper treatment. The tool also helps estimate suitable plants for different environments based on humidity readings. Components include an LCD, LM35 temperature sensor, LDR light sensor, and DHT11 humidity sensor.
Product Overview
GreenSwitch™ uses simple wireless technology to control energy usage in the home or office. With the convenient flick of one switch, the GreenSwitch Master Switch sends a protected radio frequency to all GreenSwitch components, cutting power to designated lights and outlets and setting climate control to economy mode. Turning the switch back "on" returns the system to fully operational. GreenSwitch eliminates the drain of unused electricity caused by unattended climate control, forgotten lights and "phantom power"—saving hundreds of dollars on electricity bills and greatly reducing environmental impact. GreenSwitch is easy to install as all components can be retrofitted into existing electrical systems. The GreenSwitch system is completely customizable, allowing the user to designate which electronics and appliances are affected as well as custom program their heating and cooling systems.
Smarter - Smart Adapter
This document presents a microcontrolled device that utilizes appliances, detects motion, and adapts to humidity. It uses low-cost sensors like a DHT11 temperature and humidity sensor and PIR motion sensor to monitor environmental conditions and control appliances accordingly. The device is designed to reduce electricity consumption and offer safety and cost savings by automatically turning appliances on or off based on motion detection or ambient temperature and humidity readings. It communicates wirelessly via Bluetooth and has a total estimated cost of around $1461.50 to produce. Recommendations for improvements include adjusting its fuse capacity, adding standby mode blocking, maximizing wireless data functions, including grounding, and making the outlet universal.
Plant monitoring system
Automatic plant monitoring system have recently attracted tremendous interest due to the potential application in emerging technology. More importantly, this technique have improved and may be used to enhance the performance of existing techniques or to develop and design new techniques for the growth of plants . This project will shows the new source for watering the plants in the farms which is reducing the man power . This system will ensure that plants will be monitered without direct influence of men. For designing this system electronic devices like arduino ,sensors (pressure ,soil moisture) and servo , relay , display are used . we mainly introduced automatic watering of plants which shows much efficiency for watering plants compared to other techniques used which facilitates more effective multi-type harvesting the farms and clarifies a mechanism for realizing multi-functional practices in farms using electronic devices.
51790954 green-house-environment-control
The document is a project report on monitoring and controlling the environment of a greenhouse called "The Project GreenBee". It was submitted by 4 students under the guidance of Er. Vivek Pandey of the Electrical and Electronics Engineering department of Bharat Institute of Technology, Meerut. The report introduces the current scenario of greenhouse automation in India, identifies problems with existing systems, and proposes a microcontroller-based model to automate greenhouse monitoring and control using sensors, an analog-to-digital converter, a microcontroller, and actuators.
Urban smart plant
This document describes an IoT-based urban water system that monitors soil moisture levels and controls watering. Sensors detect if soil moisture is above or below thresholds, and a motor and pump are used to control watering as needed. The system aims to save water by providing precise irrigation compared to conventional methods. It uses Arduino, sensors, motors, and data visualization software to monitor soil moisture levels over time and automate watering to address issues of increasing population, resource depletion, and water shortages.
urban power plant
This document describes an IoT-based urban water system that monitors soil moisture levels and controls watering. Sensors measure if the soil is too dry and a motor and pump are used to water the plant. The system aims to save water by providing exactly what the plant needs. It uses Arduino, sensors, motors and cloud databases to monitor soil moisture levels and control watering automatically when moisture drops below a threshold. This helps address issues of increasing population, resource depletion and water shortages.
Recommended
plant conditiona Ppt sispeng
This document describes a plant conditioner tool created by a group of 3 students - M. Ridwan M., M. Iqbal, and Yasmine N. Afifah. The plant conditioner uses an Arduino UNO to measure the temperature, light intensity, and humidity of plants and environments using sensors like the LM35, LDR, and DHT11. It displays the readings to help provide plants with the right treatment and environment to maximize their growth.
Plant Conditioner
This document describes a plant conditioner tool created by Kelompok 8 members M. Ridwan M., M. Iqbal, and Yasmine N. Afifah. The Arduino-based tool measures the temperature, light intensity, and humidity of plants and environments. It provides information on a plant's status to optimize its growth through proper treatment. The tool also helps estimate suitable plants for different environments based on humidity readings. Components include an LCD, LM35 temperature sensor, LDR light sensor, and DHT11 humidity sensor.
Product Overview
GreenSwitch™ uses simple wireless technology to control energy usage in the home or office. With the convenient flick of one switch, the GreenSwitch Master Switch sends a protected radio frequency to all GreenSwitch components, cutting power to designated lights and outlets and setting climate control to economy mode. Turning the switch back "on" returns the system to fully operational. GreenSwitch eliminates the drain of unused electricity caused by unattended climate control, forgotten lights and "phantom power"—saving hundreds of dollars on electricity bills and greatly reducing environmental impact. GreenSwitch is easy to install as all components can be retrofitted into existing electrical systems. The GreenSwitch system is completely customizable, allowing the user to designate which electronics and appliances are affected as well as custom program their heating and cooling systems.
Smarter - Smart Adapter
This document presents a microcontrolled device that utilizes appliances, detects motion, and adapts to humidity. It uses low-cost sensors like a DHT11 temperature and humidity sensor and PIR motion sensor to monitor environmental conditions and control appliances accordingly. The device is designed to reduce electricity consumption and offer safety and cost savings by automatically turning appliances on or off based on motion detection or ambient temperature and humidity readings. It communicates wirelessly via Bluetooth and has a total estimated cost of around $1461.50 to produce. Recommendations for improvements include adjusting its fuse capacity, adding standby mode blocking, maximizing wireless data functions, including grounding, and making the outlet universal.
Plant monitoring system
Automatic plant monitoring system have recently attracted tremendous interest due to the potential application in emerging technology. More importantly, this technique have improved and may be used to enhance the performance of existing techniques or to develop and design new techniques for the growth of plants . This project will shows the new source for watering the plants in the farms which is reducing the man power . This system will ensure that plants will be monitered without direct influence of men. For designing this system electronic devices like arduino ,sensors (pressure ,soil moisture) and servo , relay , display are used . we mainly introduced automatic watering of plants which shows much efficiency for watering plants compared to other techniques used which facilitates more effective multi-type harvesting the farms and clarifies a mechanism for realizing multi-functional practices in farms using electronic devices.
51790954 green-house-environment-control
The document is a project report on monitoring and controlling the environment of a greenhouse called "The Project GreenBee". It was submitted by 4 students under the guidance of Er. Vivek Pandey of the Electrical and Electronics Engineering department of Bharat Institute of Technology, Meerut. The report introduces the current scenario of greenhouse automation in India, identifies problems with existing systems, and proposes a microcontroller-based model to automate greenhouse monitoring and control using sensors, an analog-to-digital converter, a microcontroller, and actuators.
Urban smart plant
This document describes an IoT-based urban water system that monitors soil moisture levels and controls watering. Sensors detect if soil moisture is above or below thresholds, and a motor and pump are used to control watering as needed. The system aims to save water by providing precise irrigation compared to conventional methods. It uses Arduino, sensors, motors, and data visualization software to monitor soil moisture levels over time and automate watering to address issues of increasing population, resource depletion, and water shortages.
urban power plant
This document describes an IoT-based urban water system that monitors soil moisture levels and controls watering. Sensors measure if the soil is too dry and a motor and pump are used to water the plant. The system aims to save water by providing exactly what the plant needs. It uses Arduino, sensors, motors and cloud databases to monitor soil moisture levels and control watering automatically when moisture drops below a threshold. This helps address issues of increasing population, resource depletion and water shortages.
Digital Soil Moisture Sensor
This document describes a digital soil moisture sensor that can be used to automatically monitor soil moisture levels and trigger watering systems. The sensor outputs a digital signal indicating soil moisture levels and can connect to devices like Arduino. It works by measuring the dielectric constant of soil which corresponds to moisture level. The sensor has adjustable sensitivity and threshold levels and provides digital, analog or serial output of moisture readings for various microcontroller applications.
Greenhouse Environment Monitoring and Controlling System Using Arduino Platform
This is the project about "Greenhouse Environment Monitoring and Controlling System Using Arduino Platform".
Supervisory Control and Data Acquisition (SCADA) system for Greenhouse Farm w...
Supervisory Control and Data Acquisition (SCADA) system for Greenhouse Farm with internet of things (I.o.T.) architecture.
Automation of a greenhouse using Raspberry Pi. Controlling Humidity,Temperature. Controlling everything remotely using your browser.
Hybrid generators in wearable electronics
Detailed and analysed report on the uses and importance of Hybrid generators.
92% plagiarism report.
5 te soil moisture temp sensor datasheet
The 5TE is designed to measure the water content, electrical conductivity, and temperature of soil and growing media.
Hybrid power generation system report
The document discusses a hybrid power generation system that uses both solar and wind energy sources. It aims to address the issues with traditional energy sources such as pollution, decreasing resources, and waste. The system uses a multiple input power conditioner with a fuzzy controller to regulate voltage from the solar and wind generators. It provides literature on previous related works and discusses the components needed for the proposed system, including an Arduino, relay, LCD display, voltage divider circuit, DC motor, and fan. The goal is to reliably generate electricity using renewable sources to meet increasing energy demands.
Smart Home Automation Based On 555 Timer
Technology is growing rapidly and gone are the days when we had to wake up in the middle of the night to
adjust our fan speed or times when we had to turn on the light each time we walk into a room and turn them off
whenever we walk out. These works are no longer done by humans instead performed by machines through
automation, which is one of the popular trends in the world of technology. Automation used for home
appliances is referred as HOME AUTOMATION. This paper describes a system for efficient home automation
without programming by using a 555 timer. It turns on electrical lights and fan whenever a person enters a room
using PIR sensor and adjusts the speed of the fan according to room temperature.
Enurga Inc
About Us: En'Urga Inc. is the industry leader in customized optical diagnostic equipment for the most challenging factory floor applications. En'Urga Inc. specializes in research, design, prototype development, customization, and calibration of optical diagnostic equipment for the factory floor, suitable for the measurement of temperatures, gas concentrations, emissivity, and particulate characteristics for both single- phase and two- phase reacting flows.
Real time lightning-bold distance calculator (IOT)
Real time lightning-bold distance calculator (IOT), using various sensor like LDR, Microphone, MS5540MB
Automatic Plant Irrigation System
Agriculture is the source of living of majority Indians and it also has a countless influence on economy of the country. The objective of our project is to reduce this manual involvement by the farmer by using an automated irrigation system which purpose is to enhance water use for agricultural crops . This paper deals with automatic irrigation system senses the moisture content of the soil and automatically switches the pump when the power is on. In this project an automation of farm irrigation and soil moisture control by Arduino using soil moisture sensor and L293D module. This automatic irrigation system senses the moisture content of the soil and automatically switches the pump when the power is on. Md. Sajid Abbas | Md. Aswer Mohiddin | N. Y. S. Pavan Teja | Ch. Nanda Kumar ""Automatic Plant Irrigation System"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23222.pdf
Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/23222/automatic-plant-irrigation-system/md-sajid-abbas
IRJET- Automated Smart Greenhouse Environment using IoT
This document describes an automated smart greenhouse system using Internet of Things (IoT) technology. Sensors are used to monitor environmental parameters like temperature, humidity, soil moisture, light intensity, and pH levels. An Arduino microcontroller collects data from the sensors and sends it over WiFi or Ethernet to a cloud server. Users can access the sensor data through a mobile app to remotely monitor greenhouse conditions. If any parameters exceed a threshold, the system can automatically control actuators like fans, pumps, and lights to regulate the greenhouse environment. The system aims to help farmers efficiently manage greenhouse agriculture without constant on-site presence.
Android Sensor and Framework - AWARE
This document discusses Android sensors, sensor frameworks, and the AWARE mobile context instrumentation framework. It describes how hardware sensors can measure the physical environment, including motion, environmental, and position sensors. It explains that the Android Sensor Framework allows accessing raw sensor data through classes like SensorManager, Sensor, and SensorEventListener. The document then introduces AWARE as a framework for logging, sharing, and reusing mobile sensor data. It provides overviews of the AWARE infrastructure and interfaces. It also describes how to use AWARE by creating plugins or standalone apps, and how to save, read, and get active updates of sensor data through AWARE.
Enurga
En'Urga Inc. is the industry leader in customized optical diagnostic equipment for the most challenging factory floor applications. En'Urga Inc. specializes in research, design, prototype development, customization, and calibration of optical diagnostic equipment for the factory floor, suitable for the measurement of temperatures, gas concentrations, emissivity, and particulate characteristics for both single- phase and two- phase reacting flows.
Instrumentation project Automatic plant fertilization
This document describes an automatic plant fertilization system based on soil moisture levels.
1. The system will automatically add liquid fertilizer to plants based on measured soil humidity levels compared to ideal levels for each plant type.
2. Sensors measure soil moisture and send readings to a microcontroller, which then controls lights and a pump.
3. When soil moisture is high enough, a red light will turn on and the pump will stop. When moisture is low, the red light will turn off and the green light and pump will activate to add water.
IRJET- Arduino Based Weather Monitoring System
This document describes an Arduino-based weather monitoring system that was developed to automatically collect weather data including temperature, humidity, and light intensity. The system uses sensors connected to an Arduino microcontroller to measure these variables over time. The sensor readings are stored in a file and can be displayed graphically to analyze weather patterns. The system was designed to forecast weather without human error by sensing key factors that determine weather conditions. It was found to successfully collect weather data through experiments and demonstrate weather patterns through generated graphs.
SMART ELECTRIC GEYSER (report)
This document describes the design of a smart electric water heater. The water heater uses sensors to monitor the environment and water temperature. An Arduino board controls the heating element based on the sensor readings to heat the water efficiently. This conserves energy by only heating the water as needed based on the environment. A keypad and display allow the user to set the target water temperature. The smart water heater aims to reduce electricity bills and carbon footprint by precisely controlling water heating.
Automation of a farm
This document proposes a system to automate a farm and monitor environmental conditions in real-time using a Raspberry Pi and Arduino board. Sensors would detect light levels, soil moisture, temperature, and humidity. The Raspberry Pi would connect to the internet and Arduino to receive analog sensor data. When light is low or soil moisture decreases, artificial light or a water pump would activate. A web interface would display current conditions and sensor readings over time to monitor the farm remotely.
Light & humidity Part 10
Our new Humidity Sensor and Fan Control detects excess humidity in a room and automatically activates the ventilation fan to reduce excess condensation.* This helps to lessen the appearance of mold and mildew and provides a more comfortable environment.
The sensor uses state-of-the-art technology to continuously monitor the air in a room and automatically turn on the ventilation fan when it detects a rise in humidity.
Green Charge: Managing Renewable Energy using Piezo Sensors
This document proposes a system to manage renewable energy using piezoelectric sensors. Piezoelectric materials generate electric current when pressure is applied. The system uses piezoelectric sensors to harvest wasted pressure energy and store it in a battery. An ARM7 microcontroller monitors sensors like LDR, temperature, and the battery level. It controls loads like LED lights and a fan based on sensor readings. When the LDR sensor detects darkness, the microcontroller turns on an LED. It also turns on a fan if the temperature exceeds 38 degrees Celsius. The system aims to efficiently use piezoelectric energy and provide power for small electronic devices in a sustainable way.
IRJET- Autonomous Greenhouse using Internet of Things with Thingspeak
This document describes an autonomous greenhouse system that uses IoT technology. The system collects data from sensors monitoring soil moisture, temperature, humidity, and light intensity. It sends this sensor data to a cloud server (ThingSpeak) via an ESP8266 WiFi module. The system then automatically controls the greenhouse environment by activating devices like water pumps, fans, and lights based on the sensor readings and pre-defined thresholds to optimize growing conditions without human intervention. The goal is to leverage IoT to reduce human effort and improve crop yields through precise environmental control in the greenhouse.
Self-Sustaining Planter with Disease Detection
This document describes a self-sustaining planter that automates watering plants and protects them from extreme weather. It collects real-time data on soil moisture and light intensity through a mobile application. It can also automatically and manually control the movement of plant pots. The planter uses sensors to detect changes in light and moisture levels and controls watering and an artificial light accordingly. It also has the ability to detect plant diseases using a trained machine learning model. The planter is powered by an ESP32 microcontroller and the mobile app allows users to monitor the plant's conditions and control pot movement remotely.
Self-Sustaining Planter with Disease Detection
This document describes a self-sustaining planter that automates watering plants and protects them from extreme weather. It collects real-time data on soil moisture and light intensity through a mobile application. It can also automatically and manually control the movement of plant pots. The planter uses sensors to detect changes in light and moisture levels and controls watering and an artificial light accordingly. It also has the ability to detect plant diseases using a trained machine learning model. The planter is powered by an ESP32 microcontroller and the mobile app allows users to monitor the plant's conditions and control pot movement remotely.
More Related Content
What's hot
Digital Soil Moisture Sensor
This document describes a digital soil moisture sensor that can be used to automatically monitor soil moisture levels and trigger watering systems. The sensor outputs a digital signal indicating soil moisture levels and can connect to devices like Arduino. It works by measuring the dielectric constant of soil which corresponds to moisture level. The sensor has adjustable sensitivity and threshold levels and provides digital, analog or serial output of moisture readings for various microcontroller applications.
Greenhouse Environment Monitoring and Controlling System Using Arduino Platform
This is the project about "Greenhouse Environment Monitoring and Controlling System Using Arduino Platform".
Supervisory Control and Data Acquisition (SCADA) system for Greenhouse Farm w...
Supervisory Control and Data Acquisition (SCADA) system for Greenhouse Farm with internet of things (I.o.T.) architecture.
Automation of a greenhouse using Raspberry Pi. Controlling Humidity,Temperature. Controlling everything remotely using your browser.
Hybrid generators in wearable electronics
Detailed and analysed report on the uses and importance of Hybrid generators.
92% plagiarism report.
5 te soil moisture temp sensor datasheet
The 5TE is designed to measure the water content, electrical conductivity, and temperature of soil and growing media.
Hybrid power generation system report
The document discusses a hybrid power generation system that uses both solar and wind energy sources. It aims to address the issues with traditional energy sources such as pollution, decreasing resources, and waste. The system uses a multiple input power conditioner with a fuzzy controller to regulate voltage from the solar and wind generators. It provides literature on previous related works and discusses the components needed for the proposed system, including an Arduino, relay, LCD display, voltage divider circuit, DC motor, and fan. The goal is to reliably generate electricity using renewable sources to meet increasing energy demands.
Smart Home Automation Based On 555 Timer
Technology is growing rapidly and gone are the days when we had to wake up in the middle of the night to
adjust our fan speed or times when we had to turn on the light each time we walk into a room and turn them off
whenever we walk out. These works are no longer done by humans instead performed by machines through
automation, which is one of the popular trends in the world of technology. Automation used for home
appliances is referred as HOME AUTOMATION. This paper describes a system for efficient home automation
without programming by using a 555 timer. It turns on electrical lights and fan whenever a person enters a room
using PIR sensor and adjusts the speed of the fan according to room temperature.
Enurga Inc
About Us: En'Urga Inc. is the industry leader in customized optical diagnostic equipment for the most challenging factory floor applications. En'Urga Inc. specializes in research, design, prototype development, customization, and calibration of optical diagnostic equipment for the factory floor, suitable for the measurement of temperatures, gas concentrations, emissivity, and particulate characteristics for both single- phase and two- phase reacting flows.
Real time lightning-bold distance calculator (IOT)
Real time lightning-bold distance calculator (IOT), using various sensor like LDR, Microphone, MS5540MB
Automatic Plant Irrigation System
Agriculture is the source of living of majority Indians and it also has a countless influence on economy of the country. The objective of our project is to reduce this manual involvement by the farmer by using an automated irrigation system which purpose is to enhance water use for agricultural crops . This paper deals with automatic irrigation system senses the moisture content of the soil and automatically switches the pump when the power is on. In this project an automation of farm irrigation and soil moisture control by Arduino using soil moisture sensor and L293D module. This automatic irrigation system senses the moisture content of the soil and automatically switches the pump when the power is on. Md. Sajid Abbas | Md. Aswer Mohiddin | N. Y. S. Pavan Teja | Ch. Nanda Kumar ""Automatic Plant Irrigation System"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23222.pdf
Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/23222/automatic-plant-irrigation-system/md-sajid-abbas
IRJET- Automated Smart Greenhouse Environment using IoT
This document describes an automated smart greenhouse system using Internet of Things (IoT) technology. Sensors are used to monitor environmental parameters like temperature, humidity, soil moisture, light intensity, and pH levels. An Arduino microcontroller collects data from the sensors and sends it over WiFi or Ethernet to a cloud server. Users can access the sensor data through a mobile app to remotely monitor greenhouse conditions. If any parameters exceed a threshold, the system can automatically control actuators like fans, pumps, and lights to regulate the greenhouse environment. The system aims to help farmers efficiently manage greenhouse agriculture without constant on-site presence.
Android Sensor and Framework - AWARE
This document discusses Android sensors, sensor frameworks, and the AWARE mobile context instrumentation framework. It describes how hardware sensors can measure the physical environment, including motion, environmental, and position sensors. It explains that the Android Sensor Framework allows accessing raw sensor data through classes like SensorManager, Sensor, and SensorEventListener. The document then introduces AWARE as a framework for logging, sharing, and reusing mobile sensor data. It provides overviews of the AWARE infrastructure and interfaces. It also describes how to use AWARE by creating plugins or standalone apps, and how to save, read, and get active updates of sensor data through AWARE.
Enurga
En'Urga Inc. is the industry leader in customized optical diagnostic equipment for the most challenging factory floor applications. En'Urga Inc. specializes in research, design, prototype development, customization, and calibration of optical diagnostic equipment for the factory floor, suitable for the measurement of temperatures, gas concentrations, emissivity, and particulate characteristics for both single- phase and two- phase reacting flows.
Instrumentation project Automatic plant fertilization
This document describes an automatic plant fertilization system based on soil moisture levels.
1. The system will automatically add liquid fertilizer to plants based on measured soil humidity levels compared to ideal levels for each plant type.
2. Sensors measure soil moisture and send readings to a microcontroller, which then controls lights and a pump.
3. When soil moisture is high enough, a red light will turn on and the pump will stop. When moisture is low, the red light will turn off and the green light and pump will activate to add water.
IRJET- Arduino Based Weather Monitoring System
This document describes an Arduino-based weather monitoring system that was developed to automatically collect weather data including temperature, humidity, and light intensity. The system uses sensors connected to an Arduino microcontroller to measure these variables over time. The sensor readings are stored in a file and can be displayed graphically to analyze weather patterns. The system was designed to forecast weather without human error by sensing key factors that determine weather conditions. It was found to successfully collect weather data through experiments and demonstrate weather patterns through generated graphs.
SMART ELECTRIC GEYSER (report)
This document describes the design of a smart electric water heater. The water heater uses sensors to monitor the environment and water temperature. An Arduino board controls the heating element based on the sensor readings to heat the water efficiently. This conserves energy by only heating the water as needed based on the environment. A keypad and display allow the user to set the target water temperature. The smart water heater aims to reduce electricity bills and carbon footprint by precisely controlling water heating.
Automation of a farm
This document proposes a system to automate a farm and monitor environmental conditions in real-time using a Raspberry Pi and Arduino board. Sensors would detect light levels, soil moisture, temperature, and humidity. The Raspberry Pi would connect to the internet and Arduino to receive analog sensor data. When light is low or soil moisture decreases, artificial light or a water pump would activate. A web interface would display current conditions and sensor readings over time to monitor the farm remotely.
Light & humidity Part 10
Our new Humidity Sensor and Fan Control detects excess humidity in a room and automatically activates the ventilation fan to reduce excess condensation.* This helps to lessen the appearance of mold and mildew and provides a more comfortable environment.
The sensor uses state-of-the-art technology to continuously monitor the air in a room and automatically turn on the ventilation fan when it detects a rise in humidity.
Green Charge: Managing Renewable Energy using Piezo Sensors
This document proposes a system to manage renewable energy using piezoelectric sensors. Piezoelectric materials generate electric current when pressure is applied. The system uses piezoelectric sensors to harvest wasted pressure energy and store it in a battery. An ARM7 microcontroller monitors sensors like LDR, temperature, and the battery level. It controls loads like LED lights and a fan based on sensor readings. When the LDR sensor detects darkness, the microcontroller turns on an LED. It also turns on a fan if the temperature exceeds 38 degrees Celsius. The system aims to efficiently use piezoelectric energy and provide power for small electronic devices in a sustainable way.
IRJET- Autonomous Greenhouse using Internet of Things with Thingspeak
This document describes an autonomous greenhouse system that uses IoT technology. The system collects data from sensors monitoring soil moisture, temperature, humidity, and light intensity. It sends this sensor data to a cloud server (ThingSpeak) via an ESP8266 WiFi module. The system then automatically controls the greenhouse environment by activating devices like water pumps, fans, and lights based on the sensor readings and pre-defined thresholds to optimize growing conditions without human intervention. The goal is to leverage IoT to reduce human effort and improve crop yields through precise environmental control in the greenhouse.
What's hot (20)
Greenhouse Environment Monitoring and Controlling System Using Arduino Platform
Greenhouse Environment Monitoring and Controlling System Using Arduino Platform
Supervisory Control and Data Acquisition (SCADA) system for Greenhouse Farm w...
Supervisory Control and Data Acquisition (SCADA) system for Greenhouse Farm w...
Real time lightning-bold distance calculator (IOT)
Real time lightning-bold distance calculator (IOT)
IRJET- Automated Smart Greenhouse Environment using IoT
IRJET- Automated Smart Greenhouse Environment using IoT
Instrumentation project Automatic plant fertilization
Instrumentation project Automatic plant fertilization
Green Charge: Managing Renewable Energy using Piezo Sensors
Green Charge: Managing Renewable Energy using Piezo Sensors
IRJET- Autonomous Greenhouse using Internet of Things with Thingspeak
IRJET- Autonomous Greenhouse using Internet of Things with Thingspeak
Similar to Plant Conditioner - Humidity, Light intensity,& Temperature measurement tools
Self-Sustaining Planter with Disease Detection
This document describes a self-sustaining planter that automates watering plants and protects them from extreme weather. It collects real-time data on soil moisture and light intensity through a mobile application. It can also automatically and manually control the movement of plant pots. The planter uses sensors to detect changes in light and moisture levels and controls watering and an artificial light accordingly. It also has the ability to detect plant diseases using a trained machine learning model. The planter is powered by an ESP32 microcontroller and the mobile app allows users to monitor the plant's conditions and control pot movement remotely.
Self-Sustaining Planter with Disease Detection
This document describes a self-sustaining planter that automates watering plants and protects them from extreme weather. It collects real-time data on soil moisture and light intensity through a mobile application. It can also automatically and manually control the movement of plant pots. The planter uses sensors to detect changes in light and moisture levels and controls watering and an artificial light accordingly. It also has the ability to detect plant diseases using a trained machine learning model. The planter is powered by an ESP32 microcontroller and the mobile app allows users to monitor the plant's conditions and control pot movement remotely.
Design Development of Water Monitoring Systems by Using Arduino and Sensors
The document discusses the design and development of a water monitoring system using various sensors. It begins with an acknowledgment section thanking those involved in the project. It then provides an abstract that outlines the need for effective water management and monitoring. The document goes on to discuss different types of sensors that can be used for monitoring water levels, soil moisture, and temperature/humidity. It describes contact sensors like soil moisture sensors and non-contact sensors like ultrasonic sensors. It also discusses the arduino processing platform and components like the GSM module for data transmission. The document appears to provide details on setting up water monitoring systems using the various sensors connected to an arduino.
IRJET- IOT based Agriculture System using NodeMCU
This document describes an IoT-based smart agriculture system using NodeMCU. The system monitors soil properties like temperature, humidity, and moisture levels using sensors and sends the data to NodeMCU. NodeMCU acts as both a microcontroller and server to control operations remotely. The system aims to automate watering based on soil moisture levels to avoid water wastage. It allows monitoring and controlling the farm from anywhere using a mobile or web application. Experimental results show the system can successfully monitor sensor values and automatically control a motor to irrigate fields based on moisture levels without human presence. This smart agriculture system using IoT has potential to improve efficiency in irrigation management.
IRJET- Design and Implementation of IoT based Greenhouse Environment Monitori...
1) The document describes an IoT-based system for monitoring and controlling the environment in a greenhouse.
2) Sensors measure parameters like temperature, humidity, soil moisture, light intensity, and more, and an Arduino microcontroller controls fans, pumps, lights, and other devices based on the sensor readings.
3) An ESP8266 WiFi module transmits sensor data to the cloud so that users can monitor and control the greenhouse remotely using a computer or mobile device.
IFFCO Industrial Training ppt
IFFCO is a leading fertilizer producer in India with 5 major production units, including the Aonla unit. The Aonla unit was built rapidly in 36 months and began commercial urea production in 1988. It has received several national awards for its project implementation, safety, and energy conservation efforts. The document then describes various measurement devices like thermocouples, thermistors, and pressure sensors as well as level sensors used at the plant including ultrasonic, capacitance, and flow sensors.
AJEET GUPTA
IFFCO is a leading fertilizer producer in India with 5 major production units, including the Aonla unit. The Aonla unit was built rapidly in 36 months and began commercial urea production in 1988. It has received several national awards for its project implementation, safety, and energy conservation efforts. The document then describes various measurement devices like thermocouples, thermistors, and pressure sensors as well as level sensors like ultrasonic and capacitance sensors used in industrial processes.
Automatic Fertilization base on Arduino Uno
1. The document describes an instrumentation project to create an automatic plant fertilization system based on soil humidity using an Arduino microcontroller and YL-69 sensor.
2. The system monitors soil humidity levels and automatically activates a pump to supply fertilizer when the soil is dry, as indicated by humidity levels below a threshold.
3. The project aims to understand microcontroller functions and build a simple automatic fertilization system using affordable components like an Arduino, sensor, LEDs, relay, and pump.
Automatic Plant Fertilization, Base On Soil Humidity Utilising YL-69 Sensor
1. The document describes an instrumentation project to create an automatic plant fertilization system based on soil humidity using an Arduino microcontroller and YL-69 sensor.
2. The system monitors soil humidity levels and automatically activates a pump to supply fertilizer when the soil is dry, as indicated by humidity levels below a threshold.
3. The project details the components, schematic, program, prototype, and trial data to automatically control fertilization based on soil humidity measurements.
Automatic Plant Fertilization based on Soil Humidity utilising Arduino and YL...
This is our Instrumentation Project. The theme of this project is about greenhouse and we came up with and idea titled with "Automatic Plant Fertilization based on Soil Humidity utilising Arduino and YL-69 Sensor ".
I hope this can be useful and helpful!
check out our video about this project at Youtube :
https://www.youtube.com/watch?v=h6N6McVpkq4 .
Dont forget to likes and subscribe!!
- Thankyou -
Automatic Plant Fertilization based on Soil Humidity utilising Arduino and So...
Instrumentation Project
Theme : GreenHouse
Title : "Automatic Plant Fertilization based on Soil Humidity utilising Arduino and Soil Moisture Sensor ( YL-69) "
Check out our Video about this project on ;
Youtube : https://www.youtube.com/watch?v=h6N6McVpkq4&t=16s
Dont forget to Like and Subscribe! :)
A Futuristic Approach for Smart Farming using IoT and ML
This document proposes a smart farming system using IoT and machine learning. The system would track livestock location using GPS, monitor water levels using ultrasonic sensors, detect soil moisture, and provide security through face recognition. Sensors would collect data that is uploaded to the cloud and accessed via a mobile app. This would allow farmers to monitor fields remotely. The system was designed and modeled using Raspberry Pi and Arduino, with sensors to track multiple variables and notify farmers of issues. It aims to help farmers more efficiently manage their resources and crops through technology.
Designing an embedded system for the parameter
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Weather Monitoring Station: A Review
Weather monitoring plays a very important role in human life hence study of weather system is necessary.
Currently there are two types of the weather monitoring stations available i.e. wired and wireless. Wireless
system has some advantages over the wired one hence popular now a days. The parameters are include in
weather monitoring usually temperature, humidity atmospheric pressure, light intensity, rainfall etc. There are
many techniques existed using different processor such as PIC, AVR, ARM etc. Analog to digital channel are
used to fetch the analog output of the sensors. The wireless techniques used in the weather monitoring having
GSM, FM channel, Zigbee, RF etc Protocols.
Garden Environmental Monitoring & Automatic Control System Using Sensors
This document describes an automated garden control system that uses sensors to monitor soil moisture, temperature, humidity, and motion to control irrigation and other systems. The system uses sensors connected to a microcontroller that processes the sensor data and controls actuators like irrigation. Wireless communication using Zigbee allows the sensor data to be transmitted remotely and monitored on a computer. The goal is to automate garden maintenance and control environmental factors like moisture and temperature scientifically to optimize plant growth while reducing manual labor.
IRJET- IoT based Modern Greenhouse with GSM Module using Arduino Platform
This document describes an IoT-based smart greenhouse system that uses sensors and a GSM module connected to an Arduino board for automated monitoring and control. The system uses sensors like a biosensor to detect enzymes and pesticides, a humidity sensor to monitor moisture levels, a fire sensor to detect fires, and a temperature sensor to regulate cooling fans if temperatures rise above a set level. An LDR sensor is also used to control lighting. The GSM module allows the system to send text messages to notify farmers if the plants need watering. The system aims to automate greenhouse operations and replace direct human supervision, allowing farmers in rural areas to benefit from precision agriculture.
Investigation and Design of Helmet for Coal Miners
The aim of the project is to design a wireless helmet for coal miners using ZigBee wireless mine supervising machines. Nowadays coal miners are facial various problems. Workers safety in underground coal mines has always remained a challenging task. Several fatal and non-fatal accidents take place worldwide resulting in causalities and injuries of coal miners. Study aims to develop a wearable safety device comprising of gas sensor, temperature sensor, oxygen sensor, opguard, ultrasonic sensor, ultraviolet sensor. The values of different sensors are continuously transmitted by wireless transmitter to the remote monitoring unit which is placed outside the mine and received by the receiver module (PC).
Investigation and Design of Helmet for Coal Miners
The aim of the project is to design a wireless helmet for coal miners using ZigBee wireless mine supervising machines. Nowadays coal miners are facial various problems. Workers safety in underground coal mines has always remained a challenging task. Several fatal and non-fatal accidents take place worldwide resulting in causalities and injuries of coal miners. Study aims to develop a wearable safety device comprising of gas sensor, temperature sensor, oxygen sensor, opguard, ultrasonic sensor, ultraviolet sensor. The values of different sensors are continuously transmitted by wireless transmitter to the remote monitoring unit which is placed outside the mine and received by the receiver module (PC).
Smart Street Light System Using IOT.pdf
This document proposes a smart street light system using IoT to reduce energy waste from street lights and increase safety at blind curves. It uses infrared sensors to detect vehicles and adjust street light brightness. When a vehicle is detected, a signal is sent to an alert system at blind curves using an nRF24L01 module. The alert system, controlled by an Arduino UNO, uses the signal timing to determine which direction has priority and displays red or green LED lights to drivers accordingly. The system aims to automatically control street lights based on presence of vehicles and warn drivers at blind curves to reduce accidents and energy consumption from lights.
IRJET-Environment based Irrigation System using Wireless Technology
This document describes an environment-based irrigation system using wireless technology. The system uses sensors like soil moisture, temperature, and ultrasonic sensors connected to an Arduino microcontroller to automatically water plants based on soil conditions. When the sensors detect low soil moisture or other environmental thresholds, the microcontroller activates a motor to turn on irrigation. The system aims to save water and reduce labor costs compared to manual irrigation. It can automatically monitor soil moisture levels and optimize watering schedules without human intervention. Researchers at Sona College of Technology developed this system to introduce automated irrigation using embedded technologies.
Similar to Plant Conditioner - Humidity, Light intensity,& Temperature measurement tools (20)
Design Development of Water Monitoring Systems by Using Arduino and Sensors
Design Development of Water Monitoring Systems by Using Arduino and Sensors
IRJET- Design and Implementation of IoT based Greenhouse Environment Monitori...
IRJET- Design and Implementation of IoT based Greenhouse Environment Monitori...
Automatic Plant Fertilization, Base On Soil Humidity Utilising YL-69 Sensor
Automatic Plant Fertilization, Base On Soil Humidity Utilising YL-69 Sensor
Automatic Plant Fertilization based on Soil Humidity utilising Arduino and YL...
Automatic Plant Fertilization based on Soil Humidity utilising Arduino and YL...
Automatic Plant Fertilization based on Soil Humidity utilising Arduino and So...
Automatic Plant Fertilization based on Soil Humidity utilising Arduino and So...
A Futuristic Approach for Smart Farming using IoT and ML
A Futuristic Approach for Smart Farming using IoT and ML
Garden Environmental Monitoring & Automatic Control System Using Sensors
Garden Environmental Monitoring & Automatic Control System Using Sensors
IRJET- IoT based Modern Greenhouse with GSM Module using Arduino Platform
IRJET- IoT based Modern Greenhouse with GSM Module using Arduino Platform
Investigation and Design of Helmet for Coal Miners
Investigation and Design of Helmet for Coal Miners
Investigation and Design of Helmet for Coal Miners
Investigation and Design of Helmet for Coal Miners
IRJET-Environment based Irrigation System using Wireless Technology
IRJET-Environment based Irrigation System using Wireless Technology
Recently uploaded
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
Assistant Engineer (Chemical) Interview Questions.pdf
These are interview questions for the post of Assistant Engineer (Chemical)
AI in customer support Use cases solutions development and implementation.pdf
AI in customer support will integrate with emerging technologies such as augmented reality (AR) and virtual reality (VR) to enhance service delivery. AR-enabled smart glasses or VR environments will provide immersive support experiences, allowing customers to visualize solutions, receive step-by-step guidance, and interact with virtual support agents in real-time. These technologies will bridge the gap between physical and digital experiences, offering innovative ways to resolve issues, demonstrate products, and deliver personalized training and support.
https://www.leewayhertz.com/ai-in-customer-support/#How-does-AI-work-in-customer-support
Sri Guru Hargobind Ji - Bandi Chor Guru.pdf
Sri Guru Hargobind Ji (19 June 1595 - 3 March 1644) is revered as the Sixth Nanak.
• On 25 May 1606 Guru Arjan nominated his son Sri Hargobind Ji as his successor. Shortly
afterwards, Guru Arjan was arrested, tortured and killed by order of the Mogul Emperor
Jahangir.
• Guru Hargobind's succession ceremony took place on 24 June 1606. He was barely
eleven years old when he became 6th Guru.
• As ordered by Guru Arjan Dev Ji, he put on two swords, one indicated his spiritual
authority (PIRI) and the other, his temporal authority (MIRI). He thus for the first time
initiated military tradition in the Sikh faith to resist religious persecution, protect
people’s freedom and independence to practice religion by choice. He transformed
Sikhs to be Saints and Soldier.
• He had a long tenure as Guru, lasting 37 years, 9 months and 3 days
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
Supermarket Management System Project Report.pdf
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
Beckhoff Programmable Logic Control Overview Presentation
This presentation is to describe the overview of PLC Beckhoff for beginners
SELENIUM CONF -PALLAVI SHARMA - 2024.pdf
Begin your journey to contribute to Selenium - A Talk at the Selenium Conference 2024
OOPS_Lab_Manual - programs using C++ programming language
This manual contains programs on object oriented programming concepts using C++ language.
Butterfly Valves Manufacturer (LBF Series).pdf
We have designed & manufacture the Lubi Valves LBF series type of Butterfly Valves for General Utility Water applications as well as for HVAC applications.
一比一原版(uoft毕业证书)加拿大多伦多大学毕业证如何办理
原版一模一样【微信：741003700 】【(uoft毕业证书)加拿大多伦多大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Call Girls Chennai +91-8824825030 Vip Call Girls Chennai
Call Girls Chennai +91-8824825030 Vip Call Girls Chennai
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
The need for ecofriendly materials as building materials in this century cannot be overemphasized
Recently uploaded (20)
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Assistant Engineer (Chemical) Interview Questions.pdf
Assistant Engineer (Chemical) Interview Questions.pdf
AI in customer support Use cases solutions development and implementation.pdf
AI in customer support Use cases solutions development and implementation.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
Beckhoff Programmable Logic Control Overview Presentation
Beckhoff Programmable Logic Control Overview Presentation
OOPS_Lab_Manual - programs using C++ programming language
OOPS_Lab_Manual - programs using C++ programming language
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
Call Girls Chennai +91-8824825030 Vip Call Girls Chennai
Call Girls Chennai +91-8824825030 Vip Call Girls Chennai
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
Plant Conditioner - Humidity, Light intensity,& Temperature measurement tools
- 1. ANGGOTA : M. Ridwan M. (171624017) M. Iqbal (171624020) Yasmine N. Afifah (171624031) KELOMPOK 8
- 2. PLANT CONDITIONER • Arduino based
- 3. Short Description This tools is used for measure temperature, light intensity, and humidity of a plant. This tools is also can be used to measure the humidity of the environment.
- 4. Advantages 1. If we use it for the plant, we can get the information about the status of it. So we can give a right treatment for the plant to maximize it growth. 2. If we use it for the environment, so we can estimate the suitable plant for the environment. So the plant could grow on its finest because of the right environment.
- 5. Diagram Block MEDIUM TRANSDUCER SIGNAL CONDITIONING OUTPUT ENVIRONMENT DISPLAY ARDUINO UNO LM 35 DHT11 LDR
- 7. Component – LCD – LM35
- 8. Component – LDR – DHT11