Planer safety
•Download as PPT, PDF•
0 likes•1,162 views
The document provides safety rules and tips for using a thickness planer, including that stock must be at least 8 inches long, the operator should never stand directly behind the planer in case of kickback, and they should let go of the stock after it starts through the planer. Useful tips are to adjust the planer to remove 1/16 of an inch of material thickness, rotate the hand wheel by 1/2 a turn to reduce thickness until proper, and plane all stock at once to ensure equal thickness.
Report
Share
Report
Share
Recommended
Table saw safety
The document provides safety instructions for using a table saw. It details specific safety rules like keeping fingers at least 5 inches from the blade and using push sticks. Proper procedures are outlined for ripping stock using the rip fence and crosscutting stock using the miter gauge. Operational techniques like beveling, rabbeting, and dado cuts are also defined.
scaffolding safety.pdf
Scaffolding safety is crucial in any construction or maintenance project that requires working at heights. Proper safety measures must be implemented to ensure the safety of workers and prevent accidents.Some of the key scaffolding safety measures include:
Scaffolding should only be erected, altered, or dismantled by a competent person who has received the necessary training.
The scaffolding should be designed and constructed by a qualified engineer or scaffolding designer.
The scaffolding should be inspected regularly by a competent person to ensure it is in good condition and safe for use.
All workers using the scaffolding should be provided with appropriate personal protective equipment (PPE) such as hard hats, safety shoes, and harnesses.
Scaffolding should be stable, level, and adequately braced to prevent collapse or movement.
The scaffolding should have safe access and egress points, such as ladder access, and the access points should be clearly marked and secured.
Workers should be trained in safe working practices, such as not overloading the scaffolding, not leaning over the guardrails, and not working on a wet or slippery surface.
By implementing these measures, scaffolding safety can be ensured, and workers can work safely and efficiently at heights.
INTRODUCTION ABOUT FITTER TRADE
TO LEARN ABOUT ITI FITTER THEORY BASIC TRAINING
http://fittertheoryelearning.blogspot.in/
http://www.youtube.com/user/ITIFITTERELEARNING?feature=mhee
Training SMAW Module
This document provides a training presentation on shielded metal arc welding (SMAW), also known as stick welding. It discusses electrode types E6013 and E7018, including their composition, properties and applications. It also covers topics like welding positions, defects, calculations, storage and techniques. The presentation aims to equip welders with knowledge on performing SMAW and passing certification tests for different welding positions.
Fitting(2)
The document discusses various tools used in a fitting shop for assembling manufactured parts. It describes holding, cutting, striking, and measuring tools. Specific tools covered include bench vices, hacksaws, files, chisels, drills, reamers, taps, dies, hammers, scribers, and micrometers. The document provides details on the parts and types of each tool.
Jointer safety
1. The document provides safety instructions for using a jointer, emphasizing the importance of always using a push block or stick and keeping hands at least 5 inches away from the cutter head.
2. Specific safety rules include never jointing end grain, keeping hands on top of the stock, and only jointing stock that is at least 1/2 inch thick.
3. The document explains how to flatten a face and straighten an edge on a jointer by using a push block and applying downward pressure on the stock.
bar bending safety precautions.pdf
Bar bending machines consist of an electric motor, gearbox, and extended shaft to bend rebar. There are different types including portable, electric, hydraulic, and automatic benders. Proper operation of bending machines requires training operators, inspecting the machine, keeping the work area clean, and using safety equipment. Operators should not exceed the machine's capacity, operate without safety guards, or place body parts near moving parts to avoid injury. Following manufacturers' safety instructions and wearing protective equipment can help safely operate bar bending machines.
Recommended
Table saw safety
The document provides safety instructions for using a table saw. It details specific safety rules like keeping fingers at least 5 inches from the blade and using push sticks. Proper procedures are outlined for ripping stock using the rip fence and crosscutting stock using the miter gauge. Operational techniques like beveling, rabbeting, and dado cuts are also defined.
scaffolding safety.pdf
Scaffolding safety is crucial in any construction or maintenance project that requires working at heights. Proper safety measures must be implemented to ensure the safety of workers and prevent accidents.Some of the key scaffolding safety measures include:
Scaffolding should only be erected, altered, or dismantled by a competent person who has received the necessary training.
The scaffolding should be designed and constructed by a qualified engineer or scaffolding designer.
The scaffolding should be inspected regularly by a competent person to ensure it is in good condition and safe for use.
All workers using the scaffolding should be provided with appropriate personal protective equipment (PPE) such as hard hats, safety shoes, and harnesses.
Scaffolding should be stable, level, and adequately braced to prevent collapse or movement.
The scaffolding should have safe access and egress points, such as ladder access, and the access points should be clearly marked and secured.
Workers should be trained in safe working practices, such as not overloading the scaffolding, not leaning over the guardrails, and not working on a wet or slippery surface.
By implementing these measures, scaffolding safety can be ensured, and workers can work safely and efficiently at heights.
INTRODUCTION ABOUT FITTER TRADE
TO LEARN ABOUT ITI FITTER THEORY BASIC TRAINING
http://fittertheoryelearning.blogspot.in/
http://www.youtube.com/user/ITIFITTERELEARNING?feature=mhee
Training SMAW Module
This document provides a training presentation on shielded metal arc welding (SMAW), also known as stick welding. It discusses electrode types E6013 and E7018, including their composition, properties and applications. It also covers topics like welding positions, defects, calculations, storage and techniques. The presentation aims to equip welders with knowledge on performing SMAW and passing certification tests for different welding positions.
Fitting(2)
The document discusses various tools used in a fitting shop for assembling manufactured parts. It describes holding, cutting, striking, and measuring tools. Specific tools covered include bench vices, hacksaws, files, chisels, drills, reamers, taps, dies, hammers, scribers, and micrometers. The document provides details on the parts and types of each tool.
Jointer safety
1. The document provides safety instructions for using a jointer, emphasizing the importance of always using a push block or stick and keeping hands at least 5 inches away from the cutter head.
2. Specific safety rules include never jointing end grain, keeping hands on top of the stock, and only jointing stock that is at least 1/2 inch thick.
3. The document explains how to flatten a face and straighten an edge on a jointer by using a push block and applying downward pressure on the stock.
bar bending safety precautions.pdf
Bar bending machines consist of an electric motor, gearbox, and extended shaft to bend rebar. There are different types including portable, electric, hydraulic, and automatic benders. Proper operation of bending machines requires training operators, inspecting the machine, keeping the work area clean, and using safety equipment. Operators should not exceed the machine's capacity, operate without safety guards, or place body parts near moving parts to avoid injury. Following manufacturers' safety instructions and wearing protective equipment can help safely operate bar bending machines.
Miter saw safety
This document provides safety rules and procedures for using a compound miter saw. It describes how to securely clamp stock and make crosscuts, miter cuts at various angles by rotating the turntable, and bevel cuts by adjusting the angle of the saw head. The compound miter saw is versatile as it can replace a radial arm saw and make quick angled cuts while maintaining safety.
Simple welded connection using Fillet weld
welded conection using fillet weld , fillet weilding ,description of fillet weld,, types of fillet weld, size of fillet weld, effective length of fillet weld, design of fillet weilding, design of steel structure, steel weilding, Theoretical throat of fillet weld, root of weld, face of weld, cross section of fillet weld,
WORKSHOP TECHNOLOGY PPT.pptx
Blacksmiths shape metal by heating it with fuels like propane or charcoal in a forge until soft enough to form with hand tools like hammers and chisels. Modern blacksmiths may also use blowtorches or induction heating. Hand forging involves hammering heated metal on an anvil with tongs. It is now often replaced by power forging with machines like power hammers and presses that can deform larger pieces of metal. Lathes hold and rotate workpieces to cut or shape them with fed tools and include a bed, headstock, tailstock, carriage, and tooling.
To make M.S Plate into required model by square T-fitting.
The document describes an experiment to make a square T-fitting from mild steel plate using various tools. The procedure involves filing the pieces to remove burrs and check dimensions, marking the required dimensions for the fitting, sawing and chipping away unwanted material, and filing edges and corners to finalize the shape. Safety precautions include careful marking, using coolant while sawing, and cleaning tools properly. The result is a square T-fitting made to the required dimensions.
Nut & bolts
Nuts are threaded fasteners that are used with bolts to fasten multiple parts together. Nuts and bolts work together, with their threaded friction and the stretch and compression of parts, to securely hold items in place. Washers are thin, disk-shaped plates that are often used with nuts and bolts to more widely distribute the load. Common materials used for nuts, bolts, and washers include carbon steel, alloy steel, stainless steel, and nickel alloys.
wire ropes
This document discusses types and uses of wire ropes in mining engineering. It describes the construction of different types of wire ropes, including strands ropes which consist of a number of wires twisted around a core wire. Strand ropes can have fiber, steel, or independent wire rope cores. The document also discusses locked coil ropes which have outer layers of shaped wires for a smooth surface and non-spinning quality. Finally, it notes that wire ropes are used for haulage and winding in mines due to their ease of handling, long life, balanced load distribution, and ability to lie flat if wires break.
PPT PRESENTATION OF WELDING
The document provides information about welding from a presentation given by Surendra Kumar. It discusses different types of welding including gas welding, arc welding, and their advantages and limitations. Gas welding uses oxygen and acetylene to produce a flame and includes oxy-acetylene welding. Arc welding uses an electric arc between an electrode and base metal to produce heat. Common applications of welding include automobile, aircraft, machinery manufacturing and structural/ship building. In conclusion, welding is widely used in industries to join metals and provides design flexibility at a relatively low cost.
Safety In Gas Cutting.
Safety in gas cutting requires understanding hazards, proper equipment use, and risk assessment. Key precautions include: knowing equipment parts and how to handle leaks, fires, or backfires; removing combustibles; using protective gear; and maintaining equipment. A risk assessment should consider training, permits, and job safety analysis to minimize dangers.
Handtool Safety Training
The document provides information on regulations and safety guidelines for using hand tools and power tools. It discusses regulations covering hand and power tools from OSHA, including definitions, guarding requirements, and safety precautions. It also provides general safety guidelines for using hand tools and power tools, such as wearing protective equipment, keeping tools in good condition, using the right tool for the job, and following manufacturer instructions. Power tool users should be aware of electrocution and other electric shock hazards and take appropriate precautions like grounding tools and not operating tools in wet conditions.
Metal Joining Processes: Welding, Riveting, Bolting, Brazing, Soldering
The presentation is a mechanical engineering presentation on the basics of metal joining processes. The basics of metal joining processes such as welding, riveting is explained in detail.
Ductile Iron Pipe Fittings Production for Water & Sewage
Ductile iron pipes are commonly used for potable water transmission and distribution. They are available in diameters from 80mm to 1600mm. Ductile iron pipes have high strength, durability, and resistance to impact and corrosion. They can withstand demanding operating conditions like water hammer and shifting soils.
The Indian market for ductile iron pipes is expected to reach 930.73 million USD by 2022 from 105.29 million USD in 2017. Growth drivers include poor access to safe drinking water and sanitation in India. Ductile iron pipes dominate the water management sector, contributing approximately 80% of total revenue.
The report provides a feasibility analysis of setting up a ductile iron pipe fittings manufacturing plant in India
Welding equipments
Welding equipment's is the tools used in the welding
The following equipment's used in the welding
1. Power Source (AC or DC)
2. Electrode Holder
3. Welding Cables
4. Ground Clamp
5. Welding Electrodes
6. Welding Helmets & Hand Shield
7. Protective Cloths
8. Finishing tools – Wire brush, Chipping Hammers.
Tapping and Drilling
This document discusses tapping and threading. It begins by explaining the objectives of learning about tapping processes and tools. It then defines tapping as the process of cutting threads using specific tools. It discusses taper, plug, and bottoming taps for starting and finishing threads. It also covers tap types, drill sizes, wrenches, and best practices for safe and effective tapping.
Ladder safety
This document provides information on ladder safety. It discusses the different types of ladders including wood, fiberglass, aluminum, and extension ladders. It outlines safety guidelines for inspecting, setting up, climbing, and using ladders properly. Key points include using ladders only for their intended purpose, facing the ladder, maintaining three points of contact, not standing higher than the third rung, and following inspection procedures to identify defects.
SCAFFOLDING
This document provides information on scaffolding safety. It defines what a scaffold is and lists common hazards like collapse, falls, and electrocution. It also discusses assessing risks, controlling risks through means like fall protection, and planning scaffolding work. Different types of scaffolds are described, including tower, mobile, tube and coupler, frame, hung, suspended, trestle, and cantilever scaffolds. Load considerations, materials, and safe erection procedures are outlined.
Metal Cutting Hacksaw Blades
Searching for metal cutting blades, Bipico is one of the leading metal cutting tools supplier & manufacturer. We provide various metal cutting tools like hacksaw, bimetal bandsaw blades, reciprocating saw blades, abrasive cutting & grinding discs and other metal cutting saw across the globe. Visit our site www.bipico.com now for more details.
15 workshop safety rules
This document outlines 15 safety rules for working in a workshop, including wearing protective clothing like aprons and shoes, tying back long hair, not rushing projects, turning off machines before cleaning, only operating one machine at a time, and reporting any damage done to equipment. Students are instructed to follow directions from teachers, work only with permission and supervision, and avoid running or horseplay in the workshop.
Welding 1
Welding is a process that joins materials by causing coalescence and can be accomplished with or without the use of filler material. There are several common welded joint types including butt, fillet, lap, and corner joints. Various welding processes are described including oxy-fuel welding, shielded metal arc welding (SMAW), gas metal arc welding (GMAW), and gas tungsten arc welding (GTAW). Key factors that affect the quality of a weld include current, voltage, travel speed, and gas selection depending on the specific process.
Workshop tools & machines
This document provides descriptions of various workshop tools and machines used in design and technology classes, including different types of drill bits for drilling holes in various materials, saws for cutting wood and metal, hammers, files, clamps for holding materials, and power tools like drills, sanders, and saws. Safety equipment like goggles are required for some power tools like pillar drills. A variety of hand tools and machines allow students to shape, cut, drill, and finish materials like wood, metal, and plastic for design projects.
Fasteners
Fasteners such as nails, screws, bolts and nuts are used to join materials together. The document discusses different types of fasteners and factors to consider when selecting a fastener, including strength, cost, installation requirements. It provides details on common fasteners like nails, wood screws, machine screws, bolts and nuts, and describes standards for dimensions, materials, and grades. Proper fastener selection depends on the application, loads involved, and materials being joined.
Basic Machine Shop Processes
Turning, grinding, drilling, and milling are some basic machine shop processes. Turning is done on a lathe to cut and shape rotating materials. Grinding improves surfaces and ensures part uniformity. Drilling makes holes using drill presses, and milling cuts materials using rotating cutters on horizontal or vertical machines. These fundamental machining processes were important for the industrial revolution and remain crucial today for modern manufacturing.
Timber
Timber, also known as wood, can be used for many structural and engineering purposes. Some key points covered in the document include:
- Timber has advantages such as availability, salvage value, ease of transport and joining.
- It has many uses including for railway sleepers, roof trusses, furniture, formwork, and packaging.
- Timber comes in various market forms depending on its size, including battens, logs, planks, boards, and poles.
- Veneers are thin wood sheets used to make plywood, which layers veneers with perpendicular grain directions to increase strength.
- Different types of timber have varying properties making some more suitable for uses like construction
More Related Content
What's hot
Miter saw safety
This document provides safety rules and procedures for using a compound miter saw. It describes how to securely clamp stock and make crosscuts, miter cuts at various angles by rotating the turntable, and bevel cuts by adjusting the angle of the saw head. The compound miter saw is versatile as it can replace a radial arm saw and make quick angled cuts while maintaining safety.
Simple welded connection using Fillet weld
welded conection using fillet weld , fillet weilding ,description of fillet weld,, types of fillet weld, size of fillet weld, effective length of fillet weld, design of fillet weilding, design of steel structure, steel weilding, Theoretical throat of fillet weld, root of weld, face of weld, cross section of fillet weld,
WORKSHOP TECHNOLOGY PPT.pptx
Blacksmiths shape metal by heating it with fuels like propane or charcoal in a forge until soft enough to form with hand tools like hammers and chisels. Modern blacksmiths may also use blowtorches or induction heating. Hand forging involves hammering heated metal on an anvil with tongs. It is now often replaced by power forging with machines like power hammers and presses that can deform larger pieces of metal. Lathes hold and rotate workpieces to cut or shape them with fed tools and include a bed, headstock, tailstock, carriage, and tooling.
To make M.S Plate into required model by square T-fitting.
The document describes an experiment to make a square T-fitting from mild steel plate using various tools. The procedure involves filing the pieces to remove burrs and check dimensions, marking the required dimensions for the fitting, sawing and chipping away unwanted material, and filing edges and corners to finalize the shape. Safety precautions include careful marking, using coolant while sawing, and cleaning tools properly. The result is a square T-fitting made to the required dimensions.
Nut & bolts
Nuts are threaded fasteners that are used with bolts to fasten multiple parts together. Nuts and bolts work together, with their threaded friction and the stretch and compression of parts, to securely hold items in place. Washers are thin, disk-shaped plates that are often used with nuts and bolts to more widely distribute the load. Common materials used for nuts, bolts, and washers include carbon steel, alloy steel, stainless steel, and nickel alloys.
wire ropes
This document discusses types and uses of wire ropes in mining engineering. It describes the construction of different types of wire ropes, including strands ropes which consist of a number of wires twisted around a core wire. Strand ropes can have fiber, steel, or independent wire rope cores. The document also discusses locked coil ropes which have outer layers of shaped wires for a smooth surface and non-spinning quality. Finally, it notes that wire ropes are used for haulage and winding in mines due to their ease of handling, long life, balanced load distribution, and ability to lie flat if wires break.
PPT PRESENTATION OF WELDING
The document provides information about welding from a presentation given by Surendra Kumar. It discusses different types of welding including gas welding, arc welding, and their advantages and limitations. Gas welding uses oxygen and acetylene to produce a flame and includes oxy-acetylene welding. Arc welding uses an electric arc between an electrode and base metal to produce heat. Common applications of welding include automobile, aircraft, machinery manufacturing and structural/ship building. In conclusion, welding is widely used in industries to join metals and provides design flexibility at a relatively low cost.
Safety In Gas Cutting.
Safety in gas cutting requires understanding hazards, proper equipment use, and risk assessment. Key precautions include: knowing equipment parts and how to handle leaks, fires, or backfires; removing combustibles; using protective gear; and maintaining equipment. A risk assessment should consider training, permits, and job safety analysis to minimize dangers.
Handtool Safety Training
The document provides information on regulations and safety guidelines for using hand tools and power tools. It discusses regulations covering hand and power tools from OSHA, including definitions, guarding requirements, and safety precautions. It also provides general safety guidelines for using hand tools and power tools, such as wearing protective equipment, keeping tools in good condition, using the right tool for the job, and following manufacturer instructions. Power tool users should be aware of electrocution and other electric shock hazards and take appropriate precautions like grounding tools and not operating tools in wet conditions.
Metal Joining Processes: Welding, Riveting, Bolting, Brazing, Soldering
The presentation is a mechanical engineering presentation on the basics of metal joining processes. The basics of metal joining processes such as welding, riveting is explained in detail.
Ductile Iron Pipe Fittings Production for Water & Sewage
Ductile iron pipes are commonly used for potable water transmission and distribution. They are available in diameters from 80mm to 1600mm. Ductile iron pipes have high strength, durability, and resistance to impact and corrosion. They can withstand demanding operating conditions like water hammer and shifting soils.
The Indian market for ductile iron pipes is expected to reach 930.73 million USD by 2022 from 105.29 million USD in 2017. Growth drivers include poor access to safe drinking water and sanitation in India. Ductile iron pipes dominate the water management sector, contributing approximately 80% of total revenue.
The report provides a feasibility analysis of setting up a ductile iron pipe fittings manufacturing plant in India
Welding equipments
Welding equipment's is the tools used in the welding
The following equipment's used in the welding
1. Power Source (AC or DC)
2. Electrode Holder
3. Welding Cables
4. Ground Clamp
5. Welding Electrodes
6. Welding Helmets & Hand Shield
7. Protective Cloths
8. Finishing tools – Wire brush, Chipping Hammers.
Tapping and Drilling
This document discusses tapping and threading. It begins by explaining the objectives of learning about tapping processes and tools. It then defines tapping as the process of cutting threads using specific tools. It discusses taper, plug, and bottoming taps for starting and finishing threads. It also covers tap types, drill sizes, wrenches, and best practices for safe and effective tapping.
Ladder safety
This document provides information on ladder safety. It discusses the different types of ladders including wood, fiberglass, aluminum, and extension ladders. It outlines safety guidelines for inspecting, setting up, climbing, and using ladders properly. Key points include using ladders only for their intended purpose, facing the ladder, maintaining three points of contact, not standing higher than the third rung, and following inspection procedures to identify defects.
SCAFFOLDING
This document provides information on scaffolding safety. It defines what a scaffold is and lists common hazards like collapse, falls, and electrocution. It also discusses assessing risks, controlling risks through means like fall protection, and planning scaffolding work. Different types of scaffolds are described, including tower, mobile, tube and coupler, frame, hung, suspended, trestle, and cantilever scaffolds. Load considerations, materials, and safe erection procedures are outlined.
Metal Cutting Hacksaw Blades
Searching for metal cutting blades, Bipico is one of the leading metal cutting tools supplier & manufacturer. We provide various metal cutting tools like hacksaw, bimetal bandsaw blades, reciprocating saw blades, abrasive cutting & grinding discs and other metal cutting saw across the globe. Visit our site www.bipico.com now for more details.
15 workshop safety rules
This document outlines 15 safety rules for working in a workshop, including wearing protective clothing like aprons and shoes, tying back long hair, not rushing projects, turning off machines before cleaning, only operating one machine at a time, and reporting any damage done to equipment. Students are instructed to follow directions from teachers, work only with permission and supervision, and avoid running or horseplay in the workshop.
Welding 1
Welding is a process that joins materials by causing coalescence and can be accomplished with or without the use of filler material. There are several common welded joint types including butt, fillet, lap, and corner joints. Various welding processes are described including oxy-fuel welding, shielded metal arc welding (SMAW), gas metal arc welding (GMAW), and gas tungsten arc welding (GTAW). Key factors that affect the quality of a weld include current, voltage, travel speed, and gas selection depending on the specific process.
Workshop tools & machines
This document provides descriptions of various workshop tools and machines used in design and technology classes, including different types of drill bits for drilling holes in various materials, saws for cutting wood and metal, hammers, files, clamps for holding materials, and power tools like drills, sanders, and saws. Safety equipment like goggles are required for some power tools like pillar drills. A variety of hand tools and machines allow students to shape, cut, drill, and finish materials like wood, metal, and plastic for design projects.
Fasteners
Fasteners such as nails, screws, bolts and nuts are used to join materials together. The document discusses different types of fasteners and factors to consider when selecting a fastener, including strength, cost, installation requirements. It provides details on common fasteners like nails, wood screws, machine screws, bolts and nuts, and describes standards for dimensions, materials, and grades. Proper fastener selection depends on the application, loads involved, and materials being joined.
What's hot (20)
To make M.S Plate into required model by square T-fitting.
To make M.S Plate into required model by square T-fitting.
Metal Joining Processes: Welding, Riveting, Bolting, Brazing, Soldering
Metal Joining Processes: Welding, Riveting, Bolting, Brazing, Soldering
Ductile Iron Pipe Fittings Production for Water & Sewage
Ductile Iron Pipe Fittings Production for Water & Sewage
Viewers also liked
Basic Machine Shop Processes
Turning, grinding, drilling, and milling are some basic machine shop processes. Turning is done on a lathe to cut and shape rotating materials. Grinding improves surfaces and ensures part uniformity. Drilling makes holes using drill presses, and milling cuts materials using rotating cutters on horizontal or vertical machines. These fundamental machining processes were important for the industrial revolution and remain crucial today for modern manufacturing.
Timber
Timber, also known as wood, can be used for many structural and engineering purposes. Some key points covered in the document include:
- Timber has advantages such as availability, salvage value, ease of transport and joining.
- It has many uses including for railway sleepers, roof trusses, furniture, formwork, and packaging.
- Timber comes in various market forms depending on its size, including battens, logs, planks, boards, and poles.
- Veneers are thin wood sheets used to make plywood, which layers veneers with perpendicular grain directions to increase strength.
- Different types of timber have varying properties making some more suitable for uses like construction
planer-machine by sherwin opeda
A planer is a type of metalworking machine tool that is similar to a shaper but larger. It is used to generate flat surfaces on large metal workpieces by moving the workpiece beneath a cutting head. Modern planers are used to maintain large dies and molds. There are different types of planers including double housing, open side, edge type, divide table, and pit type. Key parts include the bed, table, column, cross rail, and tool head. Common operations are planning horizontal, vertical, and angled surfaces as well as slots and curves. Safety precautions must be followed when using the planer.
Mechanical workshop practice-II --2015 by sudarshan.bollapu
This document outlines the lab manual for the Mechanical Workshop Practice-II course at Centurion University of Technology and Management. It details 12 total experiments split between four trades: foundry, welding, plumbing, and blacksmithing. The welding section provides an introduction to electric arc welding processes and equipment. It describes striking an arc, welding techniques, types of joints, and welding positions. The document is intended to instruct students on the cycle of experiments and recording procedures for the workshop course.
Mechanical workshop practice 2 by sudarshan.bollapu
The document provides instructions for students in the Mechanical Workshop Practice Lab at Centurion University. It outlines 12 total experiments divided into 4 categories: foundry, welding, plumbing, and blacksmithing. The experiments cover skills like pattern making, mold preparation, casting, joint preparation, and pipe installation. The document also provides an introduction to welding techniques, tools, and safety equipment used in the lab. Students are instructed to maintain a lab manual to document their experiments and procedures.
Workshop technology hand basic tools
This document provides information about basic hand tools used in a workshop technology course. It lists 10 common hand tools: hammer, nail set, crosscut saw, steel file, wood chisel, screwdriver, architect ruler, chalk line, level, and speed square. For each tool, it describes the tool's purpose and provides instructions on proper use and technique. The document aims to educate students on selecting and using basic hand tools safely and effectively.
Hand and Power Tools
The document summarizes various hand and power tools used in an industrial technology lab, including screwdrivers, hammers, saws, squares, measurement tools, chisels, sanders, drills, and drill presses. It describes the basic functions and features of screwdriver types, hammer types, saw types, squares, tape measures, rulers, chisels, sanders like belt sanders and spindle sanders, drill bits for drilling holes, and drill presses for precise drilling. References are provided for the images and definitions used.
Workshop practise
The document provides an overview of workshop practice courses taught in engineering programs. It discusses the objectives of workshop practice which are to provide hands-on experience with engineering materials, tools, equipment and manufacturing processes. It then summarizes the key trades covered in workshop practice, which include carpentry, fitting, plumbing, electrical works, sheet metal work, and welding. For each trade, it outlines the typical curriculum, tools used, and safe work practices. The goal of workshop practice is to integrate theoretical knowledge with practical skills needed for engineering product development and manufacturing.
Timber ppt-1
This document discusses various topics related to timber, including:
- Definitions of timber, wood, and lumber
- Classification of trees as endogenous or exogenous
- Seasoning of timber through natural, kiln, chemical, or electric methods
- Common uses of timber in construction and manufacturing
- Defects in timber like heart shakes, star shakes, and knots
- Deterioration of timber through decay, insects, and fire
- Methods of preserving timber through oily and water-soluble preservatives applied by painting, dipping, or pressure processes
Timber - A Construction Material
Timber comes from wood obtained from trees and is suitable for construction and other purposes. There are two main types of trees - exogenous and endogenous - with exogenous trees like conifers and deciduous trees most suitable for engineering. Timber has a macro structure visible to the eye like the pith, heartwood, and sapwood, as well as a micro structure only visible at high magnifications. Seasoning removes sap from fresh timber to make it stronger, lighter, and more durable. Common seasoning methods include natural, kiln, chemical and water seasoning. Timber is used widely in construction and manufacturing and can be preserved from damage using treatments like tar, paints, and chemical salts.
Machine shop notes.pdf
This note I prepared only for my students who are studying in Mechanical Engineering branch at Govt. Polytechnic Kothamangalam in Kerala
Workshop practice i
The lecturer notes of workshop practice 1 give the basic skills on carpentry tools and working procedures in carpentry workshop. Enjoy it !!
Timber - Types of Woods, Plywood, Veneer, Laminate, Blockboard with Market Su...
Presentation for Interior Students. Market survey on Timber (Plywood, Veneer, Laminate etc) with their prices, thickness and Sizes available in the market
Viewers also liked (13)
Mechanical workshop practice-II --2015 by sudarshan.bollapu
Mechanical workshop practice-II --2015 by sudarshan.bollapu
Mechanical workshop practice 2 by sudarshan.bollapu
Mechanical workshop practice 2 by sudarshan.bollapu
Timber - Types of Woods, Plywood, Veneer, Laminate, Blockboard with Market Su...
Timber - Types of Woods, Plywood, Veneer, Laminate, Blockboard with Market Su...
Similar to Planer safety
Planer
The document provides information on safely operating a 20" surface planer. It describes the main parts of the planer including the infeed and outfeed tables, cutter head, and table height adjustment wheel. Safety guidelines are outlined such as only touching approved parts like the on/off switch, wood, and height adjustment wheel. Proper body positioning away from the cutter head and supporting wood as it exits is emphasized. Guidelines for indexing boards, snipe prevention, grain direction, and clearing debris are also summarized.
Scroll saw safety
This document provides safety instructions for using a scroll saw. It states that a scroll saw is used to cut intricate designs on the inside and outside edges of wood. Key safety rules include adjusting the hold down clamp to securely hold the wood, keeping fingers away from the blade, and ensuring the blade teeth point down. Useful tips advise not forcing the wood, turning it carefully on curves, and drilling relief holes for internal cuts.
microtomy.pptx
This document discusses different types of microtomes and microtome knives used to cut thin sections of tissue for microscopic examination. It describes vibrating microtomes used to cut unfixed tissue, and different knife designs including wedge, plano concave, and biconcave knives made from steel or diamond. The document also covers knife sharpening techniques including honing with stones or plates and stropping to further polish knife edges.
Workshop Technology - basic tools
Workshop Technology, Basic tools
Download:
http://skillcruise.com/academics/mechanical-engineering/workshop-technology/
Jointer student
The jointer is used to create flat, straight surfaces on wood by jointing the rough face and edge, with the face always jointed before the edge to create a square corner between them. Proper safety precautions must be followed including the use of push blocks and sticks, keeping hands out of the cutter head area, and adjusting the fence and infeed table height only when instructed by the teacher.
Jointer
The jointer is used to flatten and smooth faces and edges of boards. It is a dangerous machine requiring proper safety precautions. Operators must wear safety glasses and keep loose items away. Push blocks and push sticks must be used to guide boards through, keeping hands outside the margin of safety around the cutter head. Fences and tables must be properly adjusted for each cut, and defects addressed to keep the board stable. Smooth, consistent feeding is needed to avoid kickback.
Learning the Basics of Woodturning
This is a step-by-step tutorial on the proper way to safely turn a pieces of wood into a decorative object
special tray in complete denture
This document describes the process of making a special tray for complete dentures. It begins by defining an impression tray and describing the types, which are stock trays and custom/special trays. Special trays are fabricated on a patient's cast, making them a better fit than stock trays. The document then covers the advantages of special trays, materials used to make them, ideal requirements, and the step-by-step process to fabricate a special tray, including identifying the peripheral extension, model preparation, adapting spacer wax, applying a separating medium, constructing the tray base, and adding a handle.
Similar to Planer safety (8)
More from Ken Stayner
Announcements- Thursday December 1, 2022
The document contains announcements for various school activities at Stayner Collegiate Institute including:
- An intermediate hockey team meeting at the beginning of lunch in Mr. Schiller's classroom.
- A soup drive from December 5th to 9th to help the local food bank, with the homeroom that brings the most cans per student winning a catered classroom party.
- Today's cafeteria lunch special of loaded nachos for $6.50 along with a bottle of water.
Announcements-Wednesday November 30, 2022
The document announces that girls in grades 7-8 can sign up to play volleyball by Mr. Mac's classroom, lists today's cafeteria lunch special of macaroni and cheese with a garlic stick for $6.50 which comes with a water bottle, and encourages checking the volunteer board outside the main office for opportunities.
Announcements-Tuesday November 29, 2022
The document announces a junior girls volleyball tryout today after school until 4pm in the gym. It also lists volleyball practice for this week on Tuesday and Thursday after school. The cafeteria lunch special is chicken stir-fry with lo-mein noodles for $6.50 which comes with a bottle of water. There is a volunteer board outside the main office with opportunities posted.
Announcements- Monday November 28, 2022
The Badminton Club meets at lunch for grades 9 and 10. The cafeteria lunch special is popcorn chicken poutine for $6.50 with a bottle of water. Sign-up sheets are posted outside Room 224 for senior girls interested in volleyball tryouts on Tuesday and Thursday with attendance being important.
Announcements- Thursday November 24, 2022
The document announces several sports-related opportunities for students:
1) A meeting is being held for students interested in scorekeeping for basketball and volleyball games, where they can earn community service hours.
2) Students interested in joining the ski team/ski group should see Mr. Wheatcroft at the beginning of lunch.
3) Intermediate girls basketball practice is at 11:05am in the gym.
4) The cafeteria lunch special is loaded nachos for $6.50 with a bottle of water.
Announcements- Wednesday November 23, 2022
The Senior Boys volleyball team will compete against top teams from across Ontario in Sudbury today. Students are wished luck representing their school. The cafeteria is serving macaroni and cheese with a garlic stick for $6.50 including a water bottle. Mr. French is looking for volunteers to help with scorekeeping for girls volleyball games to earn community service hours. Badminton club invites grade 11 and 12 students to join them at lunch in the gym.
Announcements- Tuesday November 22, 2022
Today's cafeteria lunch special is pulled pork on a bun or pulled pork poutine for $6.50, which comes with a bottle of water. Junior girls volleyball tryouts are after school from 2:45-4 pm. The Clearview Youth Centre Advisory Committee is looking for youth aged 14-18 who want leadership opportunities, to advocate for youth, and make a difference locally; applications are due November 25th and can be completed online. Upcoming university visits include Redeemer University on November 23rd at 1pm.
Announcements- Thursday November 17, 2022
The senior boys volleyball team won the GBSSA championship and will now compete at OFSAA in Sudbury. The drama club is holding auditions for its spring play with over 20 roles available. Badminton club starts next week for grades 9-10 on Mondays and grades 11-12 on Wednesdays.
Announcements- Wednesday November 16, 2022
The document announces junior and senior boys basketball practice after school from 2:45-4:00, a college and university application workshop on November 21st in room 107, today's cafeteria lunch special of macaroni and cheese with a garlic stick for $6.50, and that the Clearview Youth Centre Advisory Committee is looking for youth aged 14-18 interested in leadership and advocacy opportunities in their community.
Announcements- Tuesday November 15, 2022
The document contains announcements for various school activities including an intermediate girls basketball practice, junior girls volleyball tryouts, today's cafeteria lunch special, and upcoming university and college visits. It also includes notices about applying for the Clearview Youth Centre Advisory Committee and checking the volunteer board for opportunities.
Announcements- Monday November 14, 2022
Boys junior and senior basketball tryouts will be held after school today at 2:45 pm in the gym. Junior girls interested in volleyball should sign up for tryouts using posted QR codes, with the first practice tomorrow after school. The Clearview Youth Centre is accepting applications until November 25 from youth aged 14-18 interested in leadership, advocacy, and community involvement.
Announcements- Wednesday November 9, 2022
The document contains announcements for various school activities, events, and opportunities including a book group meeting, sports games and tryouts, lunch specials, workshops on college and university applications, volunteer opportunities with a community theatre group and youth advisory committee, and upcoming university information sessions. Students are encouraged to participate in extracurricular activities, support athletic teams, and take advantage of academic and leadership opportunities.
Announcements- Thursday November 3, 2022
Today the senior boys volleyball team will play against Le Caron at 3pm in their first game of the OFSAA championships. Tryouts for the junior girls volleyball team will be held next Thursday after school. The cafeteria is serving perogies with onions and bacon for $6.50 for today's lunch special. Intermediate girls basketball practice will be in the gym at 11:05am.
Announcements- Wednesday November 2, 2022
The Sr. Boys Volleyball team will have their last practice today after school before facing Le Caron in the first playoff game tomorrow at home. As the #1 seed, SCI will host the game at 3:00pm so students should come out and cheer on the Spartans as they begin their journey to the OFSAA championships.
Announcements- Tuesday November 1, 2022
The intermediate girls basketball team has practice at 11:05am in the gym. The junior boys volleyball team is traveling to Elmvale for their first playoff match of the season. There is also a senior boys volleyball practice after school that everyone must attend. The guidance counselors are taking a trip to the college information fair next week for students interested in attending college. The Clearview Youth Centre is looking for youth aged 14-18 to join their advisory committee. Various universities and colleges will be visiting the school over the next few weeks for information sessions.
Announcements- Monday October 31, 2022
The document discusses an upcoming college information fair trip for students interested in attending college next year. Representatives from all Ontario colleges will be present to promote their schools and answer questions. Students should see Mr. Murray in Guidance for permission forms and more details about the Wednesday, November 2nd trip.
Announcements- Friday October 28, 2022
This Monday is Halloween dress up day at the school. Students and staff are encouraged to dress in black, orange or costumes, but costumes must adhere to the dress code and not conceal identities or include weapon accessories. The document cautions that costumes should not culturally appropriate or offend others. It also announces that the House of Arts group will make decorations for a Haunted Halls event at lunch daily.
Announcements- Thursday October 27, 2022
The document announces several upcoming special events at the school, including a Halloween dance on October 27th for secondary students, a haunted halls event on October 28th, Halloween dress up day on October 31st, and reminders about cultural appropriateness of costumes. It also provides information about volunteer opportunities to help decorate for the haunted halls event, and an advisory committee position for local youth.
Announcements- Tuesday October 25, 2022
The document provides information about upcoming events at the school, including a school dance on October 27th for elementary and secondary students, a haunted house event on October 28th, and Halloween dress up day on October 31st. It also reminds students that costumes should not be culturally insensitive and lists volunteer opportunities, university visit dates, and activities like decorating for the haunted house and a junior girls basketball practice.
Announcements- Friday October 21, 2022
The junior boys volleyball team played their best game of the year against Le Caron but lost in the 5th set after being only one point away from victory. They look to build on their excellent performance in their next game against Notty Pines on Tuesday. The Spartans played well but ultimately fell short against Le Caron.
More from Ken Stayner (20)
Recently uploaded
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
In a world where the potential of youth innovation remains vastly untouched, there emerges a guiding light in the form of Norm Goldstein, the Founder and CEO of EduNetwork Partners. His dedication to this cause has earned him recognition as a Congressional Leadership Award recipient.
一比一原版(QMUE毕业证书)英国爱丁堡玛格丽特女王大学毕业证文凭如何办理
永久可查学历认证【微信：A575476】【(QMUE毕业证书)英国爱丁堡玛格丽特女王大学毕业证成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
1Q24_HYUNDAI CAPITAL SERVICES INC. AND SUBSIDIARIES
1Q24_HYUNDAI CAPITAL SERVICES INC. AND SUBSIDIARIES
Ellen Burstyn: From Detroit Dreamer to Hollywood Legend | CIO Women Magazine
In this article, we will dive into the extraordinary life of Ellen Burstyn, where the curtains rise on a story that's far more attractive than any script.
欧洲杯投注-欧洲杯投注外围盘口-欧洲杯投注盘口app|【网址🎉ac22.net🎉】
【网址🎉ac22.net🎉】欧洲杯投注是体育博彩和在线赌场之一，得益于UKGC的三项许可。 成立之初是三名博彩公司将40家博彩商店的合并的结果，共同创建一家名为欧洲杯投注的公司。 欧洲杯投注在线赌场为游戏爱好者提供了300多种游戏，其中200多种老虎机，其他游戏包括二十一点，轮盘，真人荷官和真人赌场等。
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
High-Quality IPTV Monthly Subscription for $15
Experience high-quality entertainment with our IPTV monthly subscription for just $15. Access a vast array of live TV channels, movies, and on-demand shows with crystal-clear streaming. Our reliable service ensures smooth, uninterrupted viewing at an unbeatable price. Perfect for those seeking premium content without breaking the bank. Start streaming today!
https://rb.gy/f409dk
8328958814KALYAN MATKA | MATKA RESULT | KALYAN
8328958814KALYAN MATKA | MATKA RESULT | KALYAN KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA
Discover the Beauty and Functionality of The Expert Remodeling Service
Unlock your kitchen's true potential with expert remodeling services from O'Brien Group Inc. Transform your space into a functional, modern, and luxurious haven with their experienced professionals. From layout reconfiguration to high-end upgrades, they deliver stunning results tailored to your style and needs. Visit obriengroupinc.com to elevate your kitchen's beauty and functionality today.
Kirill Klip GEM Royalty TNR Gold Copper Presentation
Tesla Energy rEVolution And The Golden Age For Copper: Kirill Klip GEM Royalty TNR Gold Copper Presentation
2024.06 CPMN Cambridge - Beyond Now-Next-Later.pdf
Slides presented by Phil Hornby, Founder and Director of "for product people", at Cambridge Product Management Network, on Monday 17th June 2024.
Enhancing Adoption of AI in Agri-food: Introduction
Introduction to the Panel on: Pathways and Challenges: AI-Driven Technology in Agri-Food, AI4Food, University of Guelph
“Enhancing Adoption of AI in Agri-food: a Path Forward”, 18 June 2024
Call 8867766396 Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian M...
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Stone Art Hub offers the best competitive Marble Pricing in Dubai, ensuring affordability without compromising quality. With a wide range of exquisite marble options to choose from, you can enhance your spaces with elegance and sophistication. For inquiries or orders, contact us at ☎ 9928909666. Experience luxury at unbeatable prices.
The Steadfast and Reliable Bull: Taurus Zodiac Sign
Explore the steadfast and reliable nature of the Taurus Zodiac Sign. Discover the personality traits, key dates, and horoscope insights that define the determined and practical Taurus, and learn how their grounded nature makes them the anchor of the zodiac.
Recently uploaded (20)
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
1Q24_HYUNDAI CAPITAL SERVICES INC. AND SUBSIDIARIES
1Q24_HYUNDAI CAPITAL SERVICES INC. AND SUBSIDIARIES
Ellen Burstyn: From Detroit Dreamer to Hollywood Legend | CIO Women Magazine
Ellen Burstyn: From Detroit Dreamer to Hollywood Legend | CIO Women Magazine
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Discover the Beauty and Functionality of The Expert Remodeling Service
Discover the Beauty and Functionality of The Expert Remodeling Service
Kirill Klip GEM Royalty TNR Gold Copper Presentation
Kirill Klip GEM Royalty TNR Gold Copper Presentation
2024.06 CPMN Cambridge - Beyond Now-Next-Later.pdf
2024.06 CPMN Cambridge - Beyond Now-Next-Later.pdf
Enhancing Adoption of AI in Agri-food: Introduction
Enhancing Adoption of AI in Agri-food: Introduction
Call 8867766396 Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian M...
Call 8867766396 Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian M...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
The Steadfast and Reliable Bull: Taurus Zodiac Sign
The Steadfast and Reliable Bull: Taurus Zodiac Sign
Planer safety
- 2. SPECIFIC PURPOSE • To surface stock to desired thickness.
- 3. SPECIFIC SAFETY RULES 1. Stock must be at least at least 8” long to go through the DeWALT planer. 2. Never stand directly behind in case of kick back. 3. Let go of the stock the board after it starts through the planer.
- 4. USEFULL TIPS 1. Measure the thickness of your stock and adjust the planer to remove 1/16” of material thickness. 2. Rotate the hand wheel on the side of the planer by 1/2 of a turn to reduce stock thickness until proper thickness is achieved. 3. Plane all your stock at the same time to ensure equal thickness.
- 5. THICKNESS PLANER Cutter Head (Hidden by Guard) Table Elevation Hand Wheel Depth of Cut Gauge Table
- 6. THICKNESS PLANER Cutter Head (Hidden by Guard) Table Elevation Hand Wheel Depth of Cut Gauge Table