Plan Details 1-5
•
1 like•183 views
This document contains 3 building details labeled PO1, PO2, and PO3. PO1 shows a wall section with 12.5mm plasterboard attached to steel angles, a universal column, steel angles, timber battens, blockwork, wall ties, insulation, and brickwork. PO2 depicts a cladding system with steel rails, internal and external steel sheets, insulation, and seals. PO3 illustrates a curtain wall section with a steel post, cladding rails, internal steel sheets, insulation, and seals.
Report
Share
Report
Share
Download to read offline
Recommended
Lynca Meats - Pork Factory - Meyerton - Details 01
The document provides details on the construction and installation of insulation panels for a freezer, including 9 numbered details. It specifies materials like M8 stainless steel hook bolts, 0.8mm thick metal flashing, and polystyrene and EPS insulation panels. Fixing details are given for wall corners, wall joints, floors, doors, and roof supports.
Lynca Meats - Pork Factory - Meyerton - Plan @ Floor Level 01
This document contains plans and specifications for insulation installation at a new freezer store. It includes details of new freezer pods and blast freezers being added, with dimensions and specifications for insulation panels of various thicknesses. Reference drawings are provided for insulation installation details, structural elements, and refrigeration layout. The plan provides specifications for insulating walls, floors, ceilings and openings of the new and existing structures to the required standards for the freezer environment.
Lynca Meats - Pork Factory - Meyerton - Details 02
The document contains details and specifications for insulation installation for a new freezer store, including:
- Details for a door threshold, airlock, and horizontal sliding door dimensions.
- Specifications for 15dv polystyrene insulated panels with 0.55mm thick metal skins for walls, ceilings, and doors.
- Dimensions for freezer rooms, walls, ceilings, and other structural elements.
- Joint details for ceiling to wall connections, with and without steps, and wall to wall joints.
- References to additional drawing details.
Extenal Canopy & Entrance
This document provides details for the external canopy and entrance of a primary health care centre building. It includes dimensions for the slope of the canopy, specifications for sliding doors, glass, and drainage details. Structural elements like steel beams, columns, and flooring materials are also noted, along with brackets and connections for supporting the curtain walling and lateral loads.
Atrium Details
The document provides details for constructing an atrium structure including a hollowcore precast slab supported by welded steel angles and brackets. It specifies a vapor barrier, cement particle board, mastic sealant, and floor finish. The atrium structure will support an extruded aluminum curtain walling system with flush joints sealed by silicone. The curtain walling is designed to have a water tightness of 600Pa or better and wind load resistance of 2200Pa or better. It will incorporate a drained cavity, rigid insulation, and double glazed units set in aluminum channels.
Wall Plans
This document provides details on the wall construction for a primary health care centre, including:
- Rockwool insulation with a thermal conductivity of 0.044W/mk and C studs every 900mm
- Curtain walling supported by CHS columns to structural engineers' specifications
- Plasterboard with a smooth finish and antibacterial properties, adapted for nurses' and surgery rooms
- Fibre cement and Forticrete rainscreen cladding of various sizes for the walls and atrium
- Insulation materials including PIR rigid insulation boards and filled rockwool for thermal and acoustic purposes
Sheet No - 28 - Details (11) - Structural Glazing Sloped @ Pharmacy
The document provides details on the construction of a building using structural glazing and a green roof system. It includes specifications for a precast concrete hollowcore floor slab, rigid insulation, screed, column, paving, and other flooring elements on the ground level. Above this, it describes the use of structural glazing panels supported by steel brackets, plates, and clamps along with insulation and sealants. A green roof system is installed above this consisting of a vapor barrier, growing medium, drainage layer, insulation, and ballasted roof membrane. Removable aluminum and steel components are included to allow access for repair and maintenance of the structural glazing.
Catalogue Bloxer English
For over 30 years, Bloxer Ronchi has produced fire-rated doors, windows and frames. They have two production facilities totaling 6,500 square meters. They produce steel and aluminum firewall frames rated EI 30 to EI 120. Their products are tested in authorized laboratories and certified to European standards. They offer various models and finishes for doors, windows, and fixed panels suitable for commercial and industrial buildings.
Recommended
Lynca Meats - Pork Factory - Meyerton - Details 01
The document provides details on the construction and installation of insulation panels for a freezer, including 9 numbered details. It specifies materials like M8 stainless steel hook bolts, 0.8mm thick metal flashing, and polystyrene and EPS insulation panels. Fixing details are given for wall corners, wall joints, floors, doors, and roof supports.
Lynca Meats - Pork Factory - Meyerton - Plan @ Floor Level 01
This document contains plans and specifications for insulation installation at a new freezer store. It includes details of new freezer pods and blast freezers being added, with dimensions and specifications for insulation panels of various thicknesses. Reference drawings are provided for insulation installation details, structural elements, and refrigeration layout. The plan provides specifications for insulating walls, floors, ceilings and openings of the new and existing structures to the required standards for the freezer environment.
Lynca Meats - Pork Factory - Meyerton - Details 02
The document contains details and specifications for insulation installation for a new freezer store, including:
- Details for a door threshold, airlock, and horizontal sliding door dimensions.
- Specifications for 15dv polystyrene insulated panels with 0.55mm thick metal skins for walls, ceilings, and doors.
- Dimensions for freezer rooms, walls, ceilings, and other structural elements.
- Joint details for ceiling to wall connections, with and without steps, and wall to wall joints.
- References to additional drawing details.
Extenal Canopy & Entrance
This document provides details for the external canopy and entrance of a primary health care centre building. It includes dimensions for the slope of the canopy, specifications for sliding doors, glass, and drainage details. Structural elements like steel beams, columns, and flooring materials are also noted, along with brackets and connections for supporting the curtain walling and lateral loads.
Atrium Details
The document provides details for constructing an atrium structure including a hollowcore precast slab supported by welded steel angles and brackets. It specifies a vapor barrier, cement particle board, mastic sealant, and floor finish. The atrium structure will support an extruded aluminum curtain walling system with flush joints sealed by silicone. The curtain walling is designed to have a water tightness of 600Pa or better and wind load resistance of 2200Pa or better. It will incorporate a drained cavity, rigid insulation, and double glazed units set in aluminum channels.
Wall Plans
This document provides details on the wall construction for a primary health care centre, including:
- Rockwool insulation with a thermal conductivity of 0.044W/mk and C studs every 900mm
- Curtain walling supported by CHS columns to structural engineers' specifications
- Plasterboard with a smooth finish and antibacterial properties, adapted for nurses' and surgery rooms
- Fibre cement and Forticrete rainscreen cladding of various sizes for the walls and atrium
- Insulation materials including PIR rigid insulation boards and filled rockwool for thermal and acoustic purposes
Sheet No - 28 - Details (11) - Structural Glazing Sloped @ Pharmacy
The document provides details on the construction of a building using structural glazing and a green roof system. It includes specifications for a precast concrete hollowcore floor slab, rigid insulation, screed, column, paving, and other flooring elements on the ground level. Above this, it describes the use of structural glazing panels supported by steel brackets, plates, and clamps along with insulation and sealants. A green roof system is installed above this consisting of a vapor barrier, growing medium, drainage layer, insulation, and ballasted roof membrane. Removable aluminum and steel components are included to allow access for repair and maintenance of the structural glazing.
Catalogue Bloxer English
For over 30 years, Bloxer Ronchi has produced fire-rated doors, windows and frames. They have two production facilities totaling 6,500 square meters. They produce steel and aluminum firewall frames rated EI 30 to EI 120. Their products are tested in authorized laboratories and certified to European standards. They offer various models and finishes for doors, windows, and fixed panels suitable for commercial and industrial buildings.
All drawings
This document contains construction drawings for a new regional headquarters and showroom including a ceiling plan, external wall section details, and an eaves detail. The drawings show materials, components, and specifications for the proposed building including insulation, fire protection, ventilation, structure, roofing, and facade. The drawings were produced by Dan Palmer for the Bagstock Brick Company project and include a legend, scale, and revisions.
24 hour emergency car locksmiths brisbane at hareed
Various latching functions operated generally by key or handle outside and by turnknob, key or handle inside. These locks comply with building regulations for single-action escape doors. For ease of selection specify primary lock i.e. 3 582SC. This lock can then be easily adapted to suit function required.visit :http://hareed.com.au
Lynca Meats - Pork Factory - Meyerton - Sections
The document contains plans and specifications for insulation installation at a new freezer store. It details new 250mm and 200mm thick insulation panels with fire retardant polystyrene cores and painted metal skins for walls and ceilings. It also specifies support steel, freezer floors, vertical lift doors for blast freezers, horizontal sliding doors, and panel fixing details. The plans show layouts for the new freezer store, loading bays, and staging area.
Portable cabin
Portable units made of galvanized and Zincalume steel sheets are protected from corrosion by three coating layers. They can be customized as site offices, toilets, security rooms, or other uses. The units are pick-and-place, aesthetically pleasing shelters that are installed quickly and last longer than other portable options due to their protective coatings and high strength steel construction.
Lynca Meats - Pork Factory - Meyerton - Plan @ Floor Level 02
The document is a site plan for installing insulation at a blast freezer area. It shows the layout of new blast freezers, staging areas, doors, and insulation panels. Key aspects include installing 200mm thick insulation panels on the blast freezers and airlock, and referencing other drawings for structural details, insulation details, and an overall floor plan layout.
Construction techonology 3 report
This document provides details on the manufacturing processes of various building facade materials including low-e coated glass, stainless steel cladding, and terracotta panels. It also summarizes case studies of two buildings - 100 Eleventh Avenue and 200 Eleventh Avenue in New York City that utilized these materials. The document outlines the advantages and disadvantages of each material and their fabrication processes to inform best practices for facade design and construction.
Fire rated construction
Fire rated construction materials like fire doors, fire door frames, gypsum boards, and glass fiber reinforced concrete are used to improve fire resistance of buildings. Fire doors are rated based on their ability to resist fire and smoke for a certain period of time. Fire door frames and gypsum boards also have fire resistance ratings. Rolling steel shutters and steel plate doors are common fire rated door types. Standards specify requirements for materials, construction, and labeling of fire rated doors and shutters to ensure they can withstand fire as indicated by their rating.
Complete steel-door-solutions
We manufacture Fire Rated Doors using high-grade and tough materials that do not wear and tear easily and can be operated manually, electrically, or pneumatically. List of Replace the quantifier used in fire door.
1. Stainless Steel Ball Bearing Butt Hinges (3" x 4" x 3 mm)
2. DeadLock with D - Handle or Sash Lock with Lever Handle.
3. One Point Latch Panic Bar for Single Leaf Shutter.
4. Three-Point Latch Panic Bar for Double Leaf Shutter.
5. External Trim with keys to access Panic Bar from Outside.
6. Vision Panel (a small window to look through) size can be as per client requirement.
7. Tower Bolt for Double Door.
Catálogo mampara w80 tecno
This document provides information on the W80 Partition wall system from Tecno Spa. It includes details on the profiles, panel options for glass, wood, metal and other materials. It describes the technical specifications including thickness, joint types, door configurations. It provides cross section diagrams and discusses performance, certification and environmental sustainability. Case studies are presented showing applications of the W80 partition on commercial and office projects.
Catálogo mampara w40 tecno
The document describes the W40 Partition system designed by Centro Progetti Tecno. Key features of the W40 include single glazed panels with unique material and color effects, sliding doors that slide inside the partition profiles, and high structural and acoustic performance. The system uses aluminum profiles and glazed panels to create central or offset panels. It also integrates with Tecno's W80 partition system.
Structural glazing details
This document provides details for the structural glazing system on a primary health care center building, including:
1) A concrete kicker/foundation reinforced to engineer's specifications supports a hollowcore floor and proprietary insulation.
2) A reinforced screed with polypropylene fibers is installed over the insulation.
3) Aluminum spider clamps hold structural glazing panels in place that are connected to the foundation kicker via expansion bolts for stability.
1515-T_Drawings
This document contains architectural plans for a proposed two-storey home extension including a ground floor addition of 34.66 square meters and first floor addition of 22.08 square meters. The plans show the layout of the existing house and proposed additions, including new windows, doors, rooflights, and structural elements. Construction details are provided for the foundations, walls, floors, roof, insulation, and materials. The project will update an existing house with a modernized layout and improved energy efficiency.
Pyrostyle Sales Brochure
The document describes Pyrostyle, a fire rated door and screen system. Pyrostyle doors can achieve up to 60 minutes of fire resistance and integrity. They have maximum glazed elements with minimal profiles for aesthetic appeal. Pyrostyle doors are tested according to new European standards and can be manufactured up to 3 meters high. The system provides fire protection, insulation, and inspiration for commercial buildings.
Column Covers Product Data Sheet
This document provides product information for column covers offered by Metal Design Systems. The column covers are available with a hairline or half-inch wide joint that can be dry, caulked, or have a silicone gasket. They are made from MCM or aluminum plate in various colors and finishes. The newly designed attachment system allows for easy installation and a tight fit of the column panels, which can also be easily removed due to an interlocking hanging system. Technical specifications are provided for the attachment system, joint types, profiles, materials, thicknesses, sizes, and tolerances.
Ktrimbee A-4
The document contains construction drawings and details for a multi-level building including floor plans, wall sections, and structural details. It includes floor elevation notes, material specifications, and technical details for concrete foundations, masonry walls, suspended ceilings, windows, roofing, and other building components. Dimensioned sections and details provide specifications for construction of walls, floors, windows, roofing, insulation, and other building elements.
Aluminium doors and windows
The document compares the properties of steel, aluminum, and PVC for doors and windows. Aluminum is lighter than steel but more difficult to weld. It is highly corrosion resistant and does not require painting. Aluminum doors and windows are made from extruded aluminum sections with channels and grooves for glazing. Different types of aluminum doors are described, including sliding doors, lift and slide doors, and casement doors. Aluminum windows come in fixed, sliding, stacking, and casement styles.
Proposed_Floorplans_Professional Practice_DS_Group-A1@50_Proposed Ground Floor
This document contains notes for building works including flooring, doors, decoration, drainage and miscellaneous items. For flooring, it specifies vinyl tiles and non-slip vinyl sheets for different areas. Doors are to be fire rated self-closing doors according to site plans and schedules. Walls and ceilings are to be painted white or off-white. Drainage includes waste pipes and soil stacks connected to existing drainage. Miscellaneous items like cables and pipes within ceilings are also to be painted white.
false ceiling
Suspended ceilings provide information and advantages. They are ceilings that are suspended from the structure above, generally by wires. Common materials used are drywall, plaster, or fibrous acoustic tiles. Suspended ceilings offer low costs, fast installation, sound control, flexibility, adaptability for lighting and mechanical systems, and easy accessibility to the plenum space above. The main components are the ceiling material, support wires, and a support system like a metal framing or grid.
Curtain wall%2 f facade system
This document summarizes information about two residential building facade systems. It describes the 200 11th Avenue building in New York which uses a stainless steel and terracotta panel facade. Key details about the angel hair stainless steel and ceramic-clad terracotta plinth are provided. The 100 11th Avenue building is also summarized, including its use of a low-e glass system and details about low-e glass, mega panel clips, and the tilting glass panels creating a glistening effect. Advantages and disadvantages of the materials used for both buildings are listed.
Ktrimbee A-6
This document contains detailed specifications and dimensions for barrier-free bathroom components and construction details. It lists materials like stainless steel towel dispensers, grab bars, and sinks to be installed. It also includes framing details showing wall stud and insulation layouts, as well as curtain wall system specifications with thermal breaks and factory sealed double glazing. Dimensioned details are provided for the corner column, entrance corner, and washroom layout to ensure accessibility code compliance.
Tutor mortars ppt 1
This document provides information on mortars used in bricklaying and masonry construction. It discusses the typical components of general purpose mortar, including sand, cement, water and additives. It also outlines the key requirements for a good mortar mix, such as workability, compressive strength, bond strength and durability. Finally, it describes different types of joint finishes for brickwork, including flush, keyed, raked and weather struck joints, as well as the processes of jointing and re-pointing existing brickwork.
Brick Bonds
This document provides instructions for an activity where participants use Lego bricks to experiment with different brick bonding patterns. It prompts them to build a basic brick wall and then try different bonding techniques to see how many patterns they can create. Participants are asked to consider the strengths and weaknesses of each pattern and which they would choose for different types of buildings. The document includes examples of common brick bonds like English, Flemish, and stretcher bonds.
More Related Content
What's hot
All drawings
This document contains construction drawings for a new regional headquarters and showroom including a ceiling plan, external wall section details, and an eaves detail. The drawings show materials, components, and specifications for the proposed building including insulation, fire protection, ventilation, structure, roofing, and facade. The drawings were produced by Dan Palmer for the Bagstock Brick Company project and include a legend, scale, and revisions.
24 hour emergency car locksmiths brisbane at hareed
Various latching functions operated generally by key or handle outside and by turnknob, key or handle inside. These locks comply with building regulations for single-action escape doors. For ease of selection specify primary lock i.e. 3 582SC. This lock can then be easily adapted to suit function required.visit :http://hareed.com.au
Lynca Meats - Pork Factory - Meyerton - Sections
The document contains plans and specifications for insulation installation at a new freezer store. It details new 250mm and 200mm thick insulation panels with fire retardant polystyrene cores and painted metal skins for walls and ceilings. It also specifies support steel, freezer floors, vertical lift doors for blast freezers, horizontal sliding doors, and panel fixing details. The plans show layouts for the new freezer store, loading bays, and staging area.
Portable cabin
Portable units made of galvanized and Zincalume steel sheets are protected from corrosion by three coating layers. They can be customized as site offices, toilets, security rooms, or other uses. The units are pick-and-place, aesthetically pleasing shelters that are installed quickly and last longer than other portable options due to their protective coatings and high strength steel construction.
Lynca Meats - Pork Factory - Meyerton - Plan @ Floor Level 02
The document is a site plan for installing insulation at a blast freezer area. It shows the layout of new blast freezers, staging areas, doors, and insulation panels. Key aspects include installing 200mm thick insulation panels on the blast freezers and airlock, and referencing other drawings for structural details, insulation details, and an overall floor plan layout.
Construction techonology 3 report
This document provides details on the manufacturing processes of various building facade materials including low-e coated glass, stainless steel cladding, and terracotta panels. It also summarizes case studies of two buildings - 100 Eleventh Avenue and 200 Eleventh Avenue in New York City that utilized these materials. The document outlines the advantages and disadvantages of each material and their fabrication processes to inform best practices for facade design and construction.
Fire rated construction
Fire rated construction materials like fire doors, fire door frames, gypsum boards, and glass fiber reinforced concrete are used to improve fire resistance of buildings. Fire doors are rated based on their ability to resist fire and smoke for a certain period of time. Fire door frames and gypsum boards also have fire resistance ratings. Rolling steel shutters and steel plate doors are common fire rated door types. Standards specify requirements for materials, construction, and labeling of fire rated doors and shutters to ensure they can withstand fire as indicated by their rating.
Complete steel-door-solutions
We manufacture Fire Rated Doors using high-grade and tough materials that do not wear and tear easily and can be operated manually, electrically, or pneumatically. List of Replace the quantifier used in fire door.
1. Stainless Steel Ball Bearing Butt Hinges (3" x 4" x 3 mm)
2. DeadLock with D - Handle or Sash Lock with Lever Handle.
3. One Point Latch Panic Bar for Single Leaf Shutter.
4. Three-Point Latch Panic Bar for Double Leaf Shutter.
5. External Trim with keys to access Panic Bar from Outside.
6. Vision Panel (a small window to look through) size can be as per client requirement.
7. Tower Bolt for Double Door.
Catálogo mampara w80 tecno
This document provides information on the W80 Partition wall system from Tecno Spa. It includes details on the profiles, panel options for glass, wood, metal and other materials. It describes the technical specifications including thickness, joint types, door configurations. It provides cross section diagrams and discusses performance, certification and environmental sustainability. Case studies are presented showing applications of the W80 partition on commercial and office projects.
Catálogo mampara w40 tecno
The document describes the W40 Partition system designed by Centro Progetti Tecno. Key features of the W40 include single glazed panels with unique material and color effects, sliding doors that slide inside the partition profiles, and high structural and acoustic performance. The system uses aluminum profiles and glazed panels to create central or offset panels. It also integrates with Tecno's W80 partition system.
Structural glazing details
This document provides details for the structural glazing system on a primary health care center building, including:
1) A concrete kicker/foundation reinforced to engineer's specifications supports a hollowcore floor and proprietary insulation.
2) A reinforced screed with polypropylene fibers is installed over the insulation.
3) Aluminum spider clamps hold structural glazing panels in place that are connected to the foundation kicker via expansion bolts for stability.
1515-T_Drawings
This document contains architectural plans for a proposed two-storey home extension including a ground floor addition of 34.66 square meters and first floor addition of 22.08 square meters. The plans show the layout of the existing house and proposed additions, including new windows, doors, rooflights, and structural elements. Construction details are provided for the foundations, walls, floors, roof, insulation, and materials. The project will update an existing house with a modernized layout and improved energy efficiency.
Pyrostyle Sales Brochure
The document describes Pyrostyle, a fire rated door and screen system. Pyrostyle doors can achieve up to 60 minutes of fire resistance and integrity. They have maximum glazed elements with minimal profiles for aesthetic appeal. Pyrostyle doors are tested according to new European standards and can be manufactured up to 3 meters high. The system provides fire protection, insulation, and inspiration for commercial buildings.
Column Covers Product Data Sheet
This document provides product information for column covers offered by Metal Design Systems. The column covers are available with a hairline or half-inch wide joint that can be dry, caulked, or have a silicone gasket. They are made from MCM or aluminum plate in various colors and finishes. The newly designed attachment system allows for easy installation and a tight fit of the column panels, which can also be easily removed due to an interlocking hanging system. Technical specifications are provided for the attachment system, joint types, profiles, materials, thicknesses, sizes, and tolerances.
Ktrimbee A-4
The document contains construction drawings and details for a multi-level building including floor plans, wall sections, and structural details. It includes floor elevation notes, material specifications, and technical details for concrete foundations, masonry walls, suspended ceilings, windows, roofing, and other building components. Dimensioned sections and details provide specifications for construction of walls, floors, windows, roofing, insulation, and other building elements.
Aluminium doors and windows
The document compares the properties of steel, aluminum, and PVC for doors and windows. Aluminum is lighter than steel but more difficult to weld. It is highly corrosion resistant and does not require painting. Aluminum doors and windows are made from extruded aluminum sections with channels and grooves for glazing. Different types of aluminum doors are described, including sliding doors, lift and slide doors, and casement doors. Aluminum windows come in fixed, sliding, stacking, and casement styles.
Proposed_Floorplans_Professional Practice_DS_Group-A1@50_Proposed Ground Floor
This document contains notes for building works including flooring, doors, decoration, drainage and miscellaneous items. For flooring, it specifies vinyl tiles and non-slip vinyl sheets for different areas. Doors are to be fire rated self-closing doors according to site plans and schedules. Walls and ceilings are to be painted white or off-white. Drainage includes waste pipes and soil stacks connected to existing drainage. Miscellaneous items like cables and pipes within ceilings are also to be painted white.
false ceiling
Suspended ceilings provide information and advantages. They are ceilings that are suspended from the structure above, generally by wires. Common materials used are drywall, plaster, or fibrous acoustic tiles. Suspended ceilings offer low costs, fast installation, sound control, flexibility, adaptability for lighting and mechanical systems, and easy accessibility to the plenum space above. The main components are the ceiling material, support wires, and a support system like a metal framing or grid.
Curtain wall%2 f facade system
This document summarizes information about two residential building facade systems. It describes the 200 11th Avenue building in New York which uses a stainless steel and terracotta panel facade. Key details about the angel hair stainless steel and ceramic-clad terracotta plinth are provided. The 100 11th Avenue building is also summarized, including its use of a low-e glass system and details about low-e glass, mega panel clips, and the tilting glass panels creating a glistening effect. Advantages and disadvantages of the materials used for both buildings are listed.
Ktrimbee A-6
This document contains detailed specifications and dimensions for barrier-free bathroom components and construction details. It lists materials like stainless steel towel dispensers, grab bars, and sinks to be installed. It also includes framing details showing wall stud and insulation layouts, as well as curtain wall system specifications with thermal breaks and factory sealed double glazing. Dimensioned details are provided for the corner column, entrance corner, and washroom layout to ensure accessibility code compliance.
What's hot (20)
24 hour emergency car locksmiths brisbane at hareed
24 hour emergency car locksmiths brisbane at hareed
Lynca Meats - Pork Factory - Meyerton - Plan @ Floor Level 02
Lynca Meats - Pork Factory - Meyerton - Plan @ Floor Level 02
Proposed_Floorplans_Professional Practice_DS_Group-A1@50_Proposed Ground Floor
Proposed_Floorplans_Professional Practice_DS_Group-A1@50_Proposed Ground Floor
Viewers also liked
Tutor mortars ppt 1
This document provides information on mortars used in bricklaying and masonry construction. It discusses the typical components of general purpose mortar, including sand, cement, water and additives. It also outlines the key requirements for a good mortar mix, such as workability, compressive strength, bond strength and durability. Finally, it describes different types of joint finishes for brickwork, including flush, keyed, raked and weather struck joints, as well as the processes of jointing and re-pointing existing brickwork.
Brick Bonds
This document provides instructions for an activity where participants use Lego bricks to experiment with different brick bonding patterns. It prompts them to build a basic brick wall and then try different bonding techniques to see how many patterns they can create. Participants are asked to consider the strengths and weaknesses of each pattern and which they would choose for different types of buildings. The document includes examples of common brick bonds like English, Flemish, and stretcher bonds.
Archicad 3DMD Railing Panel Bar Outer -Details
BIM Railing Objects for Archicad
Download the demo
www.3dmediadesign.it
Collision of forms in architecture
The document discusses different ways that architectural forms can collide or intersect with each other. Forms can subvert their individual identities and merge into a new composite form. Alternatively, forms can retain their separate identities while sharing an interlocking space. Forms can also separate after intersecting but remain linked by a third element that references one of the original forms.
Theory of design collisions of form
Manish Jain
Gr. Floor , Ashoka apartment
Bhawani Singh Road
C-scheme , Jaipur -302001
Rajasthan ( INDIA)
Ph. 91-0141-2743536 , 91-9829063132
Email: manish@frontdesk.co.in, fdarchitect@gmail.com
Web : www.frontdesk.co.in
Tutor l1 basic tools
This document lists and describes common tools and equipment used in bricklaying. It includes trowels, hammers, chisels, levels, squares and other tools used for measuring, marking, cutting, shaping and finishing bricks and mortar. Key tools discussed are walling and pointing trowels, brick hammers, lump hammers, bolster chisels, spirit levels, lines and pins, and half round jointing tools. Details provided include typical materials used for handles, common styles or uses, and safety tips for proper use.
Pointing and finishing
Pointing - the technique of repairing mortar joints between bricks or other masonry elements.
Finishing - a fine job in building construction process
where it forms the beauty of a building.
Types of bonds
There are several types of bonds used in brickwork:
Stretcher bond uses bricks laid lengthwise. Header bond uses bricks laid perpendicular. English bond alternates headers and stretchers in each course. Flemish bond also alternates headers and stretchers but starts each alternate course with a header.
Proper bonding distributes load, adds stability, and can be decorative. Stretcher bond is used for thin walls while header bond is for thick, single wythe walls. English bond is most common, using headers and stretchers, with rules about placement. Flemish bond alternates starting each other course with a header.
Jointing & Pointing Brick & Blockwork
Jointing refers to finishing joints as brickwork proceeds, while pointing finishes raked joints after completion. Common joint profiles include half-round tooled, flush, raked or square-recessed, and weatherstruck. Jointing tools shape joints, with timing depending on brick suction and weather. Pointing involves raking joints and finishing them after brickwork is complete, sometimes using colored mortar mixes for aesthetic effects. Careful joint finishing is important for neat internal and external angles.
TLE 9 (Technical Drafting) - Theory and Concepts of Site Development Plan
It is a powerpoint presentation that discusses about the topic or lesson: Theory and Concepts of Site Development Plan. It also includes the definition, characteristics and examples of a Site Development Plan..
Surface finishes(1)
This document provides information on various building construction materials and techniques. It discusses surface finishes like plasters and paints that protect surfaces and provide decoration. It describes cladding materials like wood, stone, vinyl and metal that provide weather protection, aesthetics and insulation. It also details pointing and jointing techniques for brickwork and discusses plastering methods using materials like lime, cement and mud in single or multiple coats. Tools used for tasks like pointing, jointing and plastering are also outlined.
Brick walling and joints
This document discusses different types of brick bonds used in masonry construction. It begins by explaining the necessity of bonds, including strengthening the wall, distributing load uniformly, and ensuring quality work. It then describes 12 common bond types such as stretcher bond, header bond, English bond, and Flemish bond. Each bond type is defined through text and diagrams of wall plans and elevations. The document also covers requirements for good bonds and examples of L-joints and T-joints in different bond configurations.
Bricks fin
This document discusses various types of brick bonds used in masonry construction. It begins by defining common brick laying patterns such as stretcher, header, soldier, etc. It then explains different bond patterns including English bond, Flemish bond, English cross bond, rat trap bond, Dutch bond, and others. It also covers special bonds used for garden walls. Finally, it discusses bonds used at wall connections, specifically tee junctions, cross junctions, and squint junctions between walls of varying thicknesses.
Gothic Architecture
Gothic architecture originated in 12th century Europe and is known for pointed arches, ribbed vaults, flying buttresses, stained glass windows, and decorative elements like gargoyles. Key features include pointed arches that allowed buildings to reach greater heights and widths, ribbed vaulting for fire protection, and flying buttresses for structural support which permitted thinner walls and larger windows. These elements made Gothic cathedrals and churches lighter and more ornate than previous Romanesque designs.
Forms in architecture
The floor plan is a 2D view of a building's walls and interior layout. Common geometric shapes for floor plans include rectangles, squares, circles, triangles, hexagons, and octagons. Rectangular floor plans make the most efficient use of space with parallel lines and no wasted areas, while square plans are simple but less space-efficient. Round plans center around a shared area but have expensive unusual angles. Hexagonal and octagonal plans combine curved and straight lines. Irregular plans use a combination of shapes for unique building sites.
pointing, plastering, bonding
What is pointing?
Scope of pointing
Method of pointing
What is plastering?
Objective of plastering
Lime plaster
Cement plaster
Gypsum plaster (plaster of Paris)
Water proof plaster of Mortar
Heat resistant plasters
Defects in plastering
1.Stretcher bond
2.Header bond
3.English bond and
4.Flemish bond.
Assignment mixed land use
This document discusses the history and principles of mixed land use development. It begins by defining mixed land use as any combination of residential, commercial, and industrial uses that are physically and functionally integrated. The document then outlines the history of mixed land use, noting that traditional settlements were typically mixed use but industrialization led to more separated uses. It describes how modern zoning laws further separated uses but that mixed use is now seen as beneficial for compact development, pedestrian environments, and strong communities.
HISTORY: Early Renaissance Architecture
History of Architecture 2
Report by: Group 1 (OIC: Ralph)
DLS-College of St. Benilde
Architecture Program
2nd Term S.Y. 2015-16
January 2016
Renaissance architecture
The Renaissance architecture began in Italy in the 15th century as a cultural revolution that substituted Gothic architecture and returned to designs of antiquity. Architects during the Renaissance became more intellectual and scientific in their designs, studying geometry, perspective, and architectural languages. Two influential Renaissance architects were Filippo Brunelleschi, who designed the dome of Florence Cathedral, and Leon Battista Alberti, who designed Tempio Malatestiano. Renaissance architecture then spread across Europe, influencing designs of castles, palaces, and cathedrals in other countries like France, Hungary, Belgium, and Germany.
Ch01 - Organisation theory design and change gareth jones
Organizations exist to create value by bringing together people and resources to produce goods and services. They do this through three stages: input, conversion, and output. Organizations exist for five major reasons: to increase specialization, use large-scale technology, manage the external environment, exert power and control, and economize on transaction costs. Organizational effectiveness is important because it allows organizations to maximize value creation and perform well through approaches like control, innovation, and efficiency. Managers measure effectiveness using goals like the mission, official goals, and operative goals.
Viewers also liked (20)
TLE 9 (Technical Drafting) - Theory and Concepts of Site Development Plan
TLE 9 (Technical Drafting) - Theory and Concepts of Site Development Plan
Ch01 - Organisation theory design and change gareth jones
Ch01 - Organisation theory design and change gareth jones
Similar to Plan Details 1-5
Details
The document provides construction details for a multi-story office and retail building including:
1) Details for the roof structure showing connections between steel beams and columns as well as eaves and drainage details.
2) A detail showing the connection between curtain walling and rainscreen cladding on the 8th floor.
3) Details for the ground floor including load bearing wall connections to curtain walling and fire door head, sill, and jamb details.
4) A detail showing the connection between the building's cavity drainage system and adjacent pavement.
5) A detail of the cavity drainage system for the lower basement level.
Section Details 1-10 plus cross section
The document contains details and specifications for the construction of a factory building, including three cross section drawings labeled SO1, SO2, and SO3. The drawings show eave details and wall panel constructions using materials like Kingspan insulated panels, galvanized steel cladding, and Thermalite blockwork. Dimensions and U-values for thermal performance are provided for building elements like roof panels, wall cladding systems, floors, and party walls.
Revit project No. 3 Thesis - Exhibition posters
This document provides specifications for building materials and construction elements used in a building project. It includes specifications for various types of insulation, boards, slabs, plaster, cladding, membranes and steel elements. Fixing details are described for securing the different materials. Fire ratings and thermal properties are specified for insulation materials. The document also notes the project is to comply with engineer's details, specifications and design.
4968_DD 9001_C_INTERIORS COST PLAN INFO_WALLS
The document defines 13 different partition types for a building project. It provides details on the materials, construction, dimensions, and acoustic properties of each partition. Key partition types include operable walls, stacking sliding glass doors, fire rated, wet area, and corridor partitions. Acoustic requirements and ceiling treatments are also specified.
Design Portfolio by Aaron Kaira
The document contains plans and details for a timber roof structure designed by Aaron Kaira. It includes a roof structure plan showing timber rafters and purlins, and sections detailing connections. Rafters are 250x50mm timber at 1200mm centers. Purlins are 75x50mm timber at 1200mm centers. Prefabricated box beams are used to support the rafters. The roof is covered with 0.5mm galvanized steel sheeting over rigid board insulation.
Alfa peb Limited- Sandwich PUF Panel
Sandwich PIR panels’ roof panels are combining low thermal conductivity ratio and good fire performance, this energy efficient PIR core panel both saves on heating costs and increases fire safety. The process of applying insulation material is comparatively easy as most of the housing roof, as well as industrial ceilings, have some access to caring insulation work. sales@asbs.in 08067451511
Jack_Lambourne - Portfolio
This document contains construction details and specifications for a multi-story building including a market place and offices. It includes details on the exterior wall, ground floor, upper floor, balcony floor, glazing system, and roof constructions. All materials and dimensions are specified according to relevant National Building Specification standards. Elevations, sections and plans are provided at a scale of 1:20.
FBP_1200 Series details-1213
This document provides construction details for various elements of a multi-level residential building, including:
- Minimum floor void depths for drainage of 705mm, 460mm, and 315mm for Blocks B, C, and D, respectively.
- Lower ground floor construction of beam and block with a U-value of 0.13 W/m2K.
- External wall construction for the lower ground floor with a U-value of 0.18 W/m2K.
- Part ground and first floor separating floor construction with an airborne sound insulation of minimum 45dB and impact sound insulation of 62dB.
- Pitched clay tiled roof construction to achieve a U-value of 0.
section and detail sheet1
This document contains details and specifications for the construction of building elements including eaves, walls, floors, and windows. It includes materials, dimensions, and thermal and acoustic properties. Sections and elevations with callouts are provided to communicate the assembly of components like cladding, battens, insulation, membranes and fixtures. Performance metrics like u-values are included to indicate the thermal efficiency of the exterior walls and floors.
3 Story Apartment
The document provides construction details for a 3-story apartment building including a balcony, foundation, and green roof. It includes materials and components for the building envelope, such as sandwich panels, plaster boards, insulation, and cladding. Precast concrete panels, steel railing systems, and drainage elements are also noted for the balcony and foundation. Layer details are given for the green roof assembly with a drainage layer, growing medium, and vegetation.
dan palmer
This document contains architectural drawings and details for the St. Mary's Healthcare Centre project. It includes floor plans, elevations, sections and construction details at various scales. The drawings were created by Daniel Palmer for his Architectural Technology course and were revised by Sarah Radif. They provide layouts and technical specifications for the proposed building.
The specs of container house
1. The document specifies the dimensions, materials, and features of standard container houses. It provides details on the frame, floor, roof, walls, doors, windows, electrical system, paint, and testing results.
2. The frame is made of zinc-plated steel and features a 3mm thick roof and 4mm thick floor frame. The floor includes 100mm rock wool insulation and an 18mm OSB board.
3. The roof also includes 100mm rock wool insulation and steel cross members. Wall panels are 50-100mm thick with Neopor, EPS, or rock wool insulation. Electrical systems include sockets, switches, and optional 110V or 230/400V configurations.
Kitsen K100 Detailed Pictures (components, packaging & loading and projects)
Kitsen K100 Wall & Column Formwork System is designed to minimize the number of components and improve site and yard efficiency.
Material: Aluminum 6061-T6
Features:
Light weight and high strength
Fast and Efficient
Safe and Reliable
Weather resistant
Easy to use and maintain
Birch plywood thickness: 12mm
Allowable concrete pressure: 60KN/㎡
Color Coated Galvalume/Galvanized Sheet Manufacturers in Bangalore, Chennai, ...
We are the leading manufacturers and suppliers of the color coated galvalume/galvanized sheet manufacturers in Bangalore, Chennai, Hyderabad, Kochi & Ahmedabad
https://alfapebltd.com/color-coated-galvalume-galvanized-sheet.html
Standing Seam Sheets Manufacturers in Bangalore, Chennai, Pune, Hyderabad, Ko...
we are the leading manufacturers and suppliers of the standing seam roofing sheets in Bangalore, Chennai, Hyderabad, Kochi, Ahmedabad,Pune. https://alfapebltd.com/standing-seam-sheets.html
Pre Engineered Building Manufacturers Bangalore India
Pre Engineered Building Manufacturers in Bangalore. Alfa Provides turnkey solution in Pre-engineered Building. For more details check in;https://www.alfapebltd.com/pre-engineered-building.html
Mauritius Freeport Development
The document provides details for the construction of a freezer including dimensions for walls, panels, supports, and other structural elements. Measurements are given for wall thicknesses, ceiling heights, panel spacings, and other construction specifications. Details are also shown for the roof support system, insulation, vapor barriers, flooring system, and door thresholds.
Standard type prefabricated housing (projects and technical spesification)
This document provides technical specifications for prefabricated buildings. It describes the steel framing system used, standards that are met, exterior and interior wall specifications including dimensions and materials, roof specifications, door and window details, electrical and plumbing installations, and available prefabricated building sizes ranging from 47 to 169 square meters. The structures are assembled on site using bolted connections without welding and can be disassembled and reassembled as needed.
Temporary hoarding-catalog
Temporary hoardings, also called hoarding panels, steel hoarding panels, metal hoarding, are widely used to partition different working areas on your working site, keep the privacy of a special place or keep the public out of a place. The steel hoarding panels are easy to assemble, disassemble, and even transport. And most importantly, temporary hoarding system is easy to store and absolutely reusable.
All our steel hoarding panels are made of heavy-duty galvanized corrugated steel plate fitted into frames. And the hoarding panels are connected one by one by couplers.
Tech_Brochure_Cladding_Remake_Booklet_LQ_Email
This document provides information on Middle East Insulation's products and services. Middle East Insulation is an ISO 9001:2008 certified company located in Dubai, UAE that manufactures cladding systems. The document describes various sandwich panel, slip joint panel, and single skin products made from steel and aluminum in different profiles and thicknesses. It also details insulated boards, Kalzip cladding systems, aluminum composite panels, purlins, and coating/color options. Project examples and certificates are included at the end.
Similar to Plan Details 1-5 (20)
Kitsen K100 Detailed Pictures (components, packaging & loading and projects)
Kitsen K100 Detailed Pictures (components, packaging & loading and projects)
Color Coated Galvalume/Galvanized Sheet Manufacturers in Bangalore, Chennai, ...
Color Coated Galvalume/Galvanized Sheet Manufacturers in Bangalore, Chennai, ...
Standing Seam Sheets Manufacturers in Bangalore, Chennai, Pune, Hyderabad, Ko...
Standing Seam Sheets Manufacturers in Bangalore, Chennai, Pune, Hyderabad, Ko...
Pre Engineered Building Manufacturers Bangalore India
Pre Engineered Building Manufacturers Bangalore India
Standard type prefabricated housing (projects and technical spesification)
Standard type prefabricated housing (projects and technical spesification)
More from Maggie Jurajda
Plan Details 1-5
This document contains 3 building details labeled PO1, PO2, and PO3. PO1 shows a wall section with 12.5mm plasterboard attached to steel angles, a universal column, insulation, and brick cladding. PO2 depicts a wall with metal cladding, an internal liner, insulation, and an external metal sheet. PO3 illustrates a curtain wall section with a steel post, internal liner, insulation, and angled flashing.
plans elevations sections
The document contains floor plans and elevations for a proposed factory building. The ground floor plan shows an open office area, production area, entrance lobby, and reception area. The first floor plan shows an open office area. Elevations and a cross section provide details on the building materials to be used, including a glazed screen, curtain wall system, composite cladding, and cavity wall insulation. Fire protection measures like stair and wall construction are also specified.
Malgorzata Jurajda - GIS Introduction
Malgorzata Jurajda attended a 6-hour continuing professional development (CPD) course on Geographical Information Systems (GIS) - Introduction on February 14, 2013. The course provided an introduction to GIS. A certificate was issued to document Malgorzata Jurajda's completion of the 6-hour GIS course.
biiab-level-2-award-in-cctv-operations-edition-2-may-2011
This document provides guidance on codes of practice, operational procedures, and guidelines for CCTV operators. It discusses the purpose of codes of practice in establishing standards and reassuring the public. Operational procedures define tasks and ensure legal compliance. Assignment instructions are site-specific contractual agreements. Clear relationships with partner agencies are important. Confidentiality of information observed and recorded is required by law and policy. The security of the control room must be maintained by restricting access.
AUTODESK certificate_1R96959R71
The document is a Certificate of Completion certifying that Malgorzata Jurajda completed a 21-hour Revit Structure 2012 Workshop course taught by Lawrence Hooker at the Excitech Limited - Bristol Authorized Training Center on September 20, 2012. The course was designed by Autodesk to help professionals learn how to use their software products and achieve excellence.
More from Maggie Jurajda (11)
biiab-level-2-award-in-cctv-operations-edition-2-may-2011
biiab-level-2-award-in-cctv-operations-edition-2-may-2011
Plan Details 1-5
- 1. PO1 PO2 PO3 Open OfficeOpen Office 1200 200 1200 1200 03 1:5 01MJ 25/08/2011 Plan Details Drawing Title University Drawing Title ScaleDate Drawn Dwg. No.Job No. Assignment No 1 - Factory Building UWIC Maggie Jurajda Name Course Title & Year Architectural Design & Technology 2 12.5mm Plasterboard bolted to steel angles Universal Column 356x406mm (20mm flange, 10mm web) Steel Angles bolted to UC 50 x 50mm timber battens - support for plasterboard 100mm Thermalite Aircrete Blockwork Angle Wall Tie in a sleave Wall Tie 50mm Knauf Insulation 50mm Clear Cavity 100mm Brickwork Extruded aluminium top hat section TH30 30mm deep PIR board insulation with fire rated canister insulation to fill any gaps Air Seal - gun-grade sealant to male joint Brick Plinth 12.5mm Plasterboard bolted to steel angles Universal Column 356x406mm (20mm flange, 10mm web) Steel Angles bolted to UC 50 x 50mm timber battens - support for plasterboard 100mm Thermalite Aircrete Blockwork Angle Wall Tie in a sleave Wall Tie 50mm Knauf Insulation 50mm Clear Cavity 100mm Brickwork 70mm Steel Cladding Rail Internal Sheet - 0.40mm thick colour coated galvanised steel Quedron lining panel Vapour Control Layer - Liner Panel - sealed endlaps and sidelaps Spacer System - 135mm deep Quadron 'GP' Vertical Spacer System Brackets at 1503 maximum centres. Insulation - 140mm thick Knauf Factoryclad 40 insulation quilt compressed to 135mm ( - 0.040W/mK) External Sheet - 0.70mm thick colour coated galvanised steel Quedron profiled sheet steel channel protecting edge of claddingl Sealant Compresible filler board 12.5mm Plasterboard bolted to steel angles 50 x 50mm timber battens - support for plasterboard RHS steel post supporting curtain wall system 100mm Thermalite Aircrete Blockwork Angle Wall Tie in a sleaved 70mm Steel Cladding Rail bolted to Steel post with a bracket steel bracket bolted to RHS steel post Internal Sheet - 0.40mm thick colour coated galvanised steel Quedron lining panel bolted to cladding rail Vapour Control Layer - Liner panel - sealed endlaps and sidelaps Curtain Wall post filled with insulation Compresible Filler Board Sealant Angled flashing covering the cladding Steel angle bolted to steel post and curtain wall post Detail PO3 Detail PO2 Detail PO1 PRODUCEDBYANAUTODESKEDUCATIONALPRODUCT PRODUCEDBYANAUTODESKEDUCATIONALPRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCTPRODUCEDBYANAUTODESKEDUCATIONALPRODUCT