1. The document proposes a device that extracts electricity from permanent magnets to generate energy in a self-sustaining manner. 2. It claims this system would be low-cost and environmentally friendly compared to current energy generation methods. 3. The system is intended to operate as a regenerative system that releases energy more quickly than it absorbs, using the permanent magnets as an internal energy source.

1. “MAKING PERMANENT MAGNETS
WORK DIRECTLY FOR YOU”
By
Col (Retd) Yogeshwar Dayal, M. Sc. (Phy), M.I.E. (I)
(A project on: How to develop a low cost technology
for abundant energy and a clean environment )

2. Every one needs electrical energy every day, the
generation of which is presently burdened with
environmental pollution and huge cost of bills
thus making the life very costly and hazardous.
But if we develop a low cost and environment
friendly energy generating system, then
certainly everyone would like to use that kind
of system, which will make our life less costly
and safe as well.

3. What is my proposal?
I propose to contribute and devote my full
energy as well as my life time work, as my
intellectual capital towards resolving the
problem of generating a low cost energy
coupled with reducing the environment
pollution, by fabricating a proto- type model
of a device that extracts electricity from
Permanent Magnets to any extent and time, of
any desired capacity in self sustaining and
auto-generation mode.

4. PHYSICS OF THE PROJECT
Energy can neither be created nor
destroyed, it merely changes its form
and in our project also the magnetic
energy (Magnetic flux) changes directly
into the form of electrical energy, while
it performs more than a perfectly
reversible system as being explained in
the following slides.

5. PHYSICS PART : TIME DOMAIN ANALYSIS
1. Irreversible Systems: By definition, the system that
cannot be restored or renewed to its initial state in an
observable time domain, without the expenditure of
energy, because of neutral or uncontrollable nature of
the observed energy. The examples are, neutrons, heat,
photons, x-rays, gamma rays etc.
2. Reversible Systems: The system that can be restored
or renewed to its initial state without the expenditure
of energy because these are balanced, being bi-polar in
nature. The examples are electric charges, protons –
electrons or magnets etc. and their related systems.

6. (a) Perfectly Reversible Systems: A system that
returns to its initial state after releasing exactly the
same quantum of energy within the same length of
time, what it took during the process of absorption of
that energy.
(b) Degenerative Systems: A system that returns
to its initial state only after releasing exactly the same
quantum of energy, but in a comparatively longer
span of time, what it took during the process of
absorption of that energy.
(c) Regenerative Systems: A system that returns
to its initial state after releasing exactly the same
quantum of energy but within a comparatively quite
shorter span of time, what it took during the process
of absorption of that energy.

7. DESIGNING A REGENERATIVE SYSTEM
EXCITED BY ITS OWN INTERNAL SOURCE
ENGINEERING PART
Here a system is envisaged, which is internally so
designed that it excites the system, such that, it
releases more energy what it had absorbed in a
given length of time and this condition is possible,
only when the permanent magnet employed with in
the system adds up its own energy towards the out
put.
put. This exactly is my project, I propose to develop
its engineering part.
part.

8. THE PHYSICS PART AND THE ENGINEERING
DESIGN ARE READY FOR DISCUSSION AND
THEN IMPLEMENTING IT INTO A WORKING
MODEL. I AM LOOKING FORWARD FOR A
CREDIBLE PARTNERSHIP WITH AN HONEST
INSTITUTION OR SOME ONE FROM THE
ELECTRICAL INDUSTRY, WHO COULD BE MY
MENTOR/ PARTNER AND WHO SHOULD BE
WILLING TO PROVIDE EITHER A LABORATORY
HELP OR INVEST FINANCIAL CAPITAL WHERE
AS I WILL INVEST MY INTELLECTUAL CAPITAL
IN ORDER TO DEVELOP THIS PROJECT JOINTLY.

9. The salient benefits of this Technology:
Though the list can be endless since it affects us in every sphere of our lives
but in part, here are some of the important benefits of obtaining electrical
energy by this technology:
1. It is an unlimited, inexhaustible, and non-polluting source of energy.
2. It is ecologically sound, with no deleterious waste products of any kind.
3. It constitutes the ultimate in local, on-site, or on-board power.
4. Every appliance can have its own in-built power supply.
5. It has no cost other than its initial manufacture.
6. It is simple and relatively inexpensive to manufacture and operate.
7. It operates either continually or on-demand, with little or no maintenance.
8. It makes possible inexpensive heating, cooling, refrigeration, air-
conditioning, and other formerly energy-intensive tasks.
9. It is suitable for all forms of transport.
10. In the case of emergency landings of the air crafts there is no risk of
catching fire by the aircraft engines since those will be replaced by the electric
motors.
11. It will boost the electrical industries because it will be the electricity, which
will be used every where as a source of clean energy.
12. No fuel required to run the device thus it will end the concept of fuel-run
engines for ever thus no worries on petroleum prices.
13. Since there is no moving part involved, there will be no noise pollution
while the generator is giving out electricity.
14. All relay stations of telecommunication's establishments etc located in the
remote areas can have their own power available there 24 hours each day.