4C Technologies provides renewable energy and project management services globally. They have expertise in wind, solar, and a new technology called Searl Effect Generator (SEG) which uses rotating magnets to generate electricity without fuel. 4C Technologies has exclusive rights to manufacture, sell, and maintain SEG products in partnership with its inventors. The SEG can power homes and larger megawatt scale projects, producing unlimited renewable energy on-site.

1. 4C Technologies
Renewable Energy Division
Company Introduction:
4C Technologies, is a US based project management company that provides a multitude of business services
in oil, gas and alternative energy sectors. We build and manage wind energy farms, finance drilling projects
and other services for our clients all over the world. The firm pursues projects domestically and
internationally especially in Latin America, the Middle East and Asia.
Our state of the art wind and solar farm projects are going to change how energy is produced throughout
the world using cutting edge technology to maximize output from our wind turbines. Using these turbines
allows 4C to produce more energy than conventional wind and solar farms.
In Renewable Energy Industry we have the expertize in:
• Wind & Solar Farm. (Planning, Designing, Manufacturing, maintenance).
• MAGNETIC WAVEFORM RENEWABLE ENERGY Renewable Power Technology

2. SEG: A Joint Venture of 4C Technologies &
Searl Magnetic International
Searl Technology, Inc. is a Florida corporation. It is a development stage privately
held company and is the holding company of Searl Magnetics, Inc (a Nevada
corporation) and Searl Aerospace, Inc., (a Nevada corporation) and eMpasys
Renewable Energy Solutions, which are wholly owned subsidiaries collectively
referred to herein as (the “Company”). The Company is engaged in the business of
research, development, re-development and licensing of its proprietary
intellectual property involving the Searl Effect Generator (SEG).
4C Technologies holds the exclusive rights to Manufacturer / Sale / Maintenance
of SMI products.
SEG Technology & Products:
• Advance Magnetics
• Electric Power Generation
• Waste To Energy Systems
• Wireless Electric Meters
• Electric Vehicles

3. Technology Principles Information
The Standalone Electric Generator consists of 3 large ring-type stators (generators,
about which, or in which a rotor rotates) that are specially magnetized with
patterns designed to generate continual motion of similarly magnetized cylindrical
rotors. The rotors are free to rotate around the stator rings with mutually
interactive eddy currents of induction that form frictionless magnetic bearings
between moving parts. In the process, electrons are paired (bosons), accelerated
outward and harnessed for their kinetic energy before they eject out to the ionized
air. Please refer to videos.
The technology involves quantum effects between layered materials that convert
natural and ever-present ambient sources of energy into electrical power. While
moving generator parts are designed to operate on a magnetic bearing, thus
prevent mechanical wear for an unlimited lifetime of continuous use.
Product Demonstration Available to see.
SEG : Searl Effect Generator

4. Inventor’s Information
Professor John R. R. Searl, President, Director. Prof. Searl is the inventor of the Searl
Effect Generator (SEG) technology of which several working units were built and
demonstrated in the UK during the l950’s. Born in England on May 2, 1932, John Searl
experienced recurring childhood dreams that led him to design a revolutionary electrical
generator fueled only by rotating magnets. The opportunity to create his design came
during his employment (c1946) at British Rewinds Ltd., as an apprentice Electrical Engineer.
Further development of his design was accomplished during his employment (c1953) as
Foreman at Midlands Electric Board, when Searl was challenged to build the unit or vacate
his position. Searl built the SEG. Even though he has endured many years of harassment and
government interference (inspired by special interests),including the seizure of his working
SEG unit that had powered his home for many years, Prof. Searl has continued his quest to
provide clean, cheap, safe and abundant energy to the world. He has lecture extensively on
the technology at the University level, internationally.

5. Benefits of SEG On-Site Power Production
• Extremely Cost effective.
• Exceeds performance of existing technologies, renewable or conventional by
substantial margins.
• Operates 24/7/365 in any temperature or climate.
• Technology conforms to the known principles of thermodynamics based on real
life experimentation.
• Operates as both a motor and generator.
• Requires no fuel, sun, wind, or geothermal temperatures by organizing and
harvesting environmental electrons.
• Costs 30% less than any known existing alternative.
• Operation creates no noise, gas emission, odor, water or radiation.
• Cannot physically wear out – components ride on a cushion of magnetism like the
bullet trains of the world.
• We believe it’s impossible to reverse engineer the proprietary magnetic sine
wave imprint. (PATENT TECHNOLOGY)
• Until now scientists have not had the proof to analyze the technology’s novel
advances sufficiently.
• Applications from transportation to major energy production.

6. The RPT is an advanced energy storage power system that can be designed to provides 100% on
demand power and will generate electricity without external input (e.g. fossil fuels such as oil or
natural gas), producing economically sustainable clean energy. The Onsite AES Power System
can be deign for OnSite power production where the power is needed, significantly less than
any other renewable or alternative energy solutions.
The Onsite AES Power System is a scalable renewable and alternative energy solution for small
to large electricity power consumption requirements. It can be utilized to support local power
substations effectively bypassing transmission lines that are associated with power lose and
energy cost increasing. The Onsite AES Power System will help reduce the burden on the present
day grid by supporting it where it is most needed
The systems are built to the highest industrial quality and completely self-contained. With
energy demands growing, a Onsite AES renewable Power System (Microgrid)
provides opportunities for electric utility operators to transform their electrical distribution
networks and lower operation cost, Commercial property owners can have a NetZero energy Bill
and Alternative Energy providers will be able to generate additional revenue with a
zero emission green energy solution.
Onsite RPT / AES (Advance Energy Storage) Power System

7. What makes the technology unique?:
The scalable Onsite AES Power system can generates unlimited renewable energy for an size
project.
What makes the Onsite AES Power system different from Solar, Wind or any other energy, its
ability to produce unlimited power at the client’s site were the power is needed.
What are the principles of the technology? :
The Onsite AES Power System (Renewing Power Technology) is an continues power
regeneration solution that is customized to provide electricity power on demand. The system
produces continues power by utilizing Power Electronics and Power Cells with renewable
proprietary engineering, No Fuel Cells,No Solar Panels,No Wind Turbine.
The Onsite AES Power system will be customized above and beyond any Independent
Underwriters Laboratories standards. The Onsite AES Power system is designed to generate
and produce Electricity based on the required Volts, Amps, Watts, Hertz and other
specifications. This is a independent system that feeds power to your property or commercial
projects just like your local electric company.
The Onsite AES Power system will be customized and configured for each application as a Eco-
friendly carbon negative renewable energy solution. The Onsite AES Power system owner will
be able to generate clean energy 24 hrs a day – 7 days a week.

8. 1. Analyze Power Consumption
2. Pre-Electricity Power Assessment
3. OnSites power Assessment
4. Design /Customization
5. Permitting /Prepare Installation Site / Schedule Install Date
6. Install Power Energy Meter
7. Check Remote Metering Communication(Optional) (1st stage)
8. Check remote Monitoring (Optional) (1st stage)
9. Install Onsite AES Power System
10. Check KVA/KW Power Production. (1st stage)
11. Check Remote Metering Communication(Optional) (2nd stage)
12. Check remote Monitoring (Optional) (2nd stage)
13. Check Onsite AES Power system KVA/KW Production (2nd stage)
14. Commission Onsite AES Power System For OnSite Operation
15. Customer Sign Onsite AES Power System Operating Authorization
Implementation & Commissioning Process:

9. Energy To Market Chart

10. 25 Kilowatt SEG specifications 1 Megawatt SEG specifications
Dimensions:
Size: 110cm in diameter by 6cm in height
Weight: 145 Kilograms
Output: 15-25 Kilowatts min.
Construction: 4 solid concentric ring layers.
Dimensions:
Size: 384 cm in diameter by 16.5 cm high.
Power Plant Weight: 4824 Kilograms.
Output range: 1MW minimum capacity.
Construction: 4 solid concentric ring layers.
The Types and Exact Isotopes of materials are classified. Manufacturing time is 6 to 8 weeks.
SMI / eMpasys Solutions owns the full and exclusive (Worldwide) rights to R&D /
Manufacturer the unique SEG Magnetizer Technology, and to develop prototypes, as well as
manage, negotiate and authorize licenses and agreements with the inventor.
4C Technologies holds the Exclusive rights to use SEG / eMpasys, proprietary Renewable
Technologies / Engineering solutions for Asia / Middle East / USA (Texas) Markets.

11. SPECIFICATIONS:
Outputs:
Cont.: 10 MW
Max Power: 10.8 MW
Output Voltage: 440 ( Adjustable)
Total Amps: 13122 (approx)
Phase: Single / 3 Phase
Output Frequency: 50 / 60 HZ
Efficiency at Full Load: 82 %
Voltage Distortion: Less than 18 +/-%
Waveform Type: Pure Sine Wave
Connections: (2) Hard Wire 3 wire (H+N+G)
System will installed in tandem.
SYSTEM DESCRIPTION FOR 10 MEGAWATT

12. Communication and Management:
Control panel: Fully digital monitoring system
Communication: Wireless Meter / Software Based.
We are designing a digitally controlled Android /
Windows / IOS Based applications.
Emergency Power Off: Yes (switch)
Surge Protection and Filtering:
Filtering: Full time multi-pole noise filtering
Environmental: (Design Per Military Grade Applications)
Operating Temp: 0-150*F (able to work in extreme environments)
(Can be customized for any working temperature)
Humidity Range: 0-100%
Operating Elevation: 0-4000 Meters
Audible noise at 1 meter from surface of unit: 5 Dba
SYSTEM DESCRIPTION FOR 10 MEGAWATT

18. Thank You for choosing 4C Technologies as your Primary Source of
On-Site Power Production
Head Office
4C Technologies, Inc. USA
Renewable Power Division
Suit- 300
3845 FM 1960 W ,
Houston, TX 77068
USA
www.4ctechnologies.com
Office No : +1-281-580-2853
(Ext-1514)
bjanjua@4ctechnologies.com
Contact: Bilal Janjua