Newgen overall main introduction material (for europe retrofit)

newgen Business Introduction
Biz. Target
- Shipbuilding Engineering Service
- Green Ship Retrofit Engineering Service
- AM/E3D/Bocad Implementation Support
- AM/E3D/Bocad Admin. Support
- AVEVA Engage Biz. Development
- Laser Scanner sales
7th August 2017
sales@onenewgen.com or
skpark@onenewgen.com
Tel: +82 51 714 5640

Company Overview
History, Organization & Office

Copyright © 2017 newgen and its subsidiaries. All rights reserved.
History of newgen
Sept. 2015
Register to AVEVA Bocad VAR.
(Dec. 2015)
2018
2019
Oct. 2015
Restructuring Business area
including Outfitting Design
Services
Jul. 2016
Registered DaeSun Shipyard
as Design Sub-con. company
Apr. 2016
Contract with Busan HRD for
AVEVA E3D / Bocad
as AVEVA Reseller
Jun. 2015
Establish “newgen”
Aug. 2016
Start 3.5K PC Outfitting Design in E/R (1st Project)
Oct. & Dec. 2016
Start 3.5K PC Outfitting Design in E/R (2nd Project)
Start 13K PC Outfitting Design in E/R (3rd Project)
Apr. 2017
Start 160m Car-Ferry in E/R (4th Project with DS)
Feb. 2017
Contract with BMEA for AM12.1 / Bocad / E3D
as AVEVA Reseller
Jun. 2017
Contract with PANASIA for BWTS Retrofit Eng’ring
(E3D Implementation)

Organization of newgen
Basic
(Y.D Choi)
Structure / Hull
(J.W Ryu)
Hull Outfitting
(D.M Kim)
Machinery Part 1
(J.H. Park)
Machinery Part 2
(J.S. Na)
Lines (Green
& ECO Ship)
& G.A.
Trim & Stability
Capacity Plan
Propeller Design
Electric
(H.C. Kim)
Key Plans
Stru. Analysis
Detail Design
Prod. Design
Hull Piping
HVAC
Mach. Piping
HVAC
Cable Tray
Cable Way
CableMach.
Steel Outfit.
Hull Steel Outfit.
Youngdal Choi
Wooyeol Jeong
Mach. Piping
HVAC
Mach.
Steel Outfit.
Accom.
(J.H Son)
Piping
HVAC
Joiner
Utility
CEO SangKyu Park
Suho Son
YoungJin Yoo
: Using Partner companies
JeongHo Choi
Laser Scanning &
E3D Design
Technical Support
for 3D CAD
(D.J Lee) (K.S Seo)

Biz. Scopes
Design S/W Sales
Design S/W Support
• AVEVA Bocad (Sales Partner)
• AVEVA Academic S/W
• AM/Bocad System Operation Support
• Bocad/AM Joint, Cat. & Spec. Library
Retrofit Engineering
Services
• Scanning Service (With Scanner Sales)
• Retrofit Design (Class Approval, PD)
• Production & Installation for BWTS
Training & Consulting
Services
• Shipbuilding/Offshore Design Training
• Engineering/Design Consulting
• Project Coordinator/Contract Party
Shipbuilding & Offshore
Engineering
• Basic Design & Structure Design
• Detail & Production Design

Photo of the Office
newgen Design Office (4th Floor)

Photo of the Office
newgen Retrofit + IT R&D Office (5th Floor)

newgen Human Resource
- Key Roles : AM Outfit. System Implementation Support & Project Manager
- Performed Projects
 STX Tribon M3 Implementation, Outfit. System Administrator (‘95~2000)
 DSME M2/M3 Technical & Implementation Support (2000 ~ 2004)
 HHI AVEVA Marine Implementation Support (2004 ~ 2007)
 Head of Busan MTSC (Marine Technology & Service Center 2007 ~ 2010)
Technical Support for AP Shipyards with 13 AM Specialist Including KHI
 BD & Sales Manager in AVEVA Korea (2011 ~ 2014)
 President of newgen (2015 ~ )
24 years, Outfit. Implementation
AVEVA Marine(AM), Tribon M3, Outfit. Specialist
Name: Mr. SangKyu Park
CV: STX O&S - 8 AVEVA(Tribon)-14, newgen - 2
CEO

- Key Roles : AM Hull System Implementation Support & Project Manager
 Steerbear, Tribon Mx, AVEVA Marine for Shipyards in the world
 DSME M2/M3 Technical & Implementation Support (2000 ~ 2004)
 HHI AVEVA Marine Implementation Support (2004 ~ 2008)
 AP Shipyards for AVEVA Marine Implementation Support (2008 ~ 2011)
 NEA Foran Technical & Implementatin Support (2011 ~ 2013)
 SungDong Shipyard AM implementation - TFT leader (2013 ~ 2016)
 newgen AM & BOCAD Technical Head (2016 ~ )
26 years, AVEVA Marine Implementation
AVEVA Marine(AM), Tribon M3, Foran, Hull Speicalist
Name: Mr. DooJin Lee
CV: HSHI-4, AVEVA(Tribon)-17, Foran Korea-3, SungDong-2, newgen
Head of
AM

- Key Roles : Tribon M3 & AM Initial Design, Hull System Admin. & Support
- Laser Scanning Team Leader
 Tribon M3 Technical Support & Training for Korea Shipyards
 Tribon M3 & AVEVA Marine for China & AP Shipards Support
 Hull Leader for STX O&S, SungDong Shipyard CAD Teams
- AVEVA China 2013~2014 TID & Hull Customer Support
- ForceTEC(STX) 2009~2012 Hull CAD Team / Team Manager
- SungDong Shipbuilding 2006~2007 Hull CAD Team / Team Manager
- Tribon Solutions Korea Ltd. 1995~2003 TID & Hull Customer Support
- HALLA Heavy Ind.(HHI Samho) 1992~1994 Hull CAD Team / Engineer
19 years, Initial & Detail AM Implementation
Tribon M3, AVEVA Marine TID & Hull Technical Support
Name: Mr. KeunSik Seo
CV: HSHI-3, Tribon(AVEVA)–8, Infoget-2, SungDong-1, STX O&S - 4, newgen
Hull Leader

- Key Roles : AM Oufit. System Implementation Support & Administrator, Oufit. Engineer
- Experiences
 newgen Engineering: E/R Outfit. Designer & AM Setup (2015 ~ )
 SM Plantec: E/R Outfit. Designer (2011 ~ 2015)
 M2/3 & AVEVA Marine Support for Korea Shipyards (2008 ~ 2011)
 GeoSM: E/R Outfit. Designer (2005 ~ 2008)
 Hana Information: E/R Outfit. Designer (2001 ~ 2005)
16 years, Outfitting Designer & AVEVA Marine Implementatin
Outfit. (Pipe & Struct) Designer, AVEVA Marine(AM) Training & Support
Name: Mr. YoungJin Yoo
CV: SM Plantec-4, AVEVA-3, GeoSM & Hana-8, EuSin-3, newgen-2
Outf. Leader

27 years, Machinery QM and Outfitting Designer
CV: HHI-3, HHI-3, SHI-8, SungDong-2, ShinaSB-5, SPP-5, newgen
Name: Mr. JeongHo Choi
Project Man.
- Key Roles : Project Manager for Retrofit Engineering
- Hull Piping Design Manager
- Shipbuiling Project Manager
- Experiences
- newgen 2017~ Project Manager
- SPP 2013~2017 Outfitting design team/ Team Leader
- ShinaSB 2007~2013 Hull piping design team / Team Leader
- SungDong 2005~2007 Hull outfitting design team / Team Leader
- SHI 1996~2004 Hull piping design team / Manager
- HHI(SamHo) 1993~1996 Hull piping design team / Assist. Manager
- HHI(Hanjin) 1991~1993 QM Team / Engineer(Machinery Part)

10 years, Hull Piping Designer
CV: ForceTec – 6, SPP - 2, STX O&S - 2, newgen
Name: Mr. WooSik Jeong
Hull Piping
- Key Roles : Hull Piping Engineer for Retrofit Engineering
- Hull Piping Design
- Experiences
- newgen 2017~ Hull Piping Engineer
- STX O & S 2015~2016 Hull Piping Engineer
- SPP 2013~2015 Hull Piping Engineer
- ForceTec 2006~2012 Hull Piping Engineer

■ Status in Korea
 Chaos Biz. status
 BWTS Vendors, Shipping Companies, Ship Repair Yards & Engineering Companies
 Major Vendors are PANASIA, TechCross, NK
 Major Vendors have Engineering Company
 PANASIA  PANASIA E&S (2012)
 TechCross  LASTECH (2012)
■ What Solution newgen has
 Scanning, Retrofit Engineering & Production/Installation Services
 One-Stop Services from Scanning to Production engineering including Concept Engineering
■ Practice of newgen
 4 Vessels for Retrofit Engineering (BWTS Retrofit Purpose)
 20K PC (Electric Type) 4,300 TEU Contrainer (Ozone Type) 20K & 4,300 TEU (UV Type)
 Small Ship Scanning & Reversing Engineering (LNG Retrofit Target)
 105 Ton Environment Surveyor Ship (Conversion from MDO fuel to LNG fuel)
 Small ship scanning & Reversing Engineering (BWTS Retrofit Target)
 UV Type – 10.6K PC, 4 vessels from Scanning to Production (Upper Deck Installed)

Experience of newgen in Retrofit Engineering
■ BWTS Retrofit Engineering using by AVEVA Products
 Production 3D Modeling using by Laser Scanning Data
 Piping, Structure, Cable tray & HVAC Production Design
■ Reversing Engineering for LNG Fueled Engine from MDO Engine
 From 3D Laser Scanning to 3D Modeling for as Build Data by E3D
 Equipment, Piping, Structure, Cable tray

Experience of newgen in Retrofit Engineering
■ BWTS Retrofit Engineering for 10.6K PC (Upper Deck installed)
 From Lase scanning to Production Design Including all Class Approval Dwg
 Damage Stability Calculation, Hull Construction dwg & Stress analysis, Outfitting basic drawing
 Piping, Structure, Cable tray & HVAC Production Design
■ Scanning service for 5.6K PC (Pump Room installed)
 For Laser Scanning Service

Facility of newgen for Retrofit Engineering
■ Z+F IMAGER® 5006h
for Scanning Services

Facility of newgen for Retrofit Engineering
■ AVEVA E3D for Production Design (Including BOM)

Benefit of E3D for Retrofit Engineering
■ No need to 3D volume (like as Rapidform or Peerless)
■ Direct intelligent modeling using by Cloud data
■ Full Support to create BOM or Manufacturing Drawing from
Intelligent Models
■ Cost Saving & Early finishing for Retrofit Engineering

■ Scanning & Retrofit Engineering Services

Case Study A:
Installed in E/Room
(Electric type)

1. Feasibility Review
1) BWMS Installation Equipment : Equipment composition
① Main Flow Meter
② Smart Pipe Unit
③ Electrolyze Unit
④ Gas Separator Unit
⑤ Neutralizing Agent Storage Tank & Neutralizer Control Panel
⑥ Power Distributor
⑦ Rectifier
⑧ Control Panel
a. Master Control Panel
b. Local Control Panel
⑨ Gas Emission System
⑩ Neutralization Sampling Port Unit
⑪ TRO Sensor

2) Space analysis for each composition (Floor, ST’BD)
① Main Flow Meter ② Smart Pipe Unit
③ Electrolyze Unit ④ Gas Separator Unit
⑤ Neutralizing Agent Storage Tank & Neutralizer Control Panel

2) Space analysis for each composition (for E.C.R)

2) Space analysis for each composition (Boat Deck)
⑨ Gas Emission System

1) Overview of Position
① Main Flow Meter & Smart Pipe Unit : Floor, Grating Under (Fr. No. 23~24)
② Electrolyzer Unit & Gas Separator Unit : Floor, On Grating (Fr. No. 20~22)
③ Neutralizing Control Panel & Agent Storage Tank : Floor (Fr. No. 20~22)
④ Power Distributor & Rectifier : Floor (Fr. No. 19~20)
⑤ Control Panel : Floor (Fr. No. 19~21)
a. Master Control Panel
b. Local Control Panel
⑥ Gas Emission System : Boat Deck
⑦ Neutralization Sampling Port Unit
& TRO Sensor :
Floor (Fr. No. 19-~20)
2. Installation Proposal

1) In Engine Room (Floor, ST’BD side)
Concept Engineering for Installation

1) In Engine Room (Floor, ST’BD side)
① Main Flow Meter
② Smart Pipe Unit
③ Electrolyzer Unit
④ Gas Separator Unit
⑤ Neutralizing Agent Storage Tank
Neutralizer Control Panel
⑥ Power Distributor
⑦ Rectifier
⑧ Control Panel
①
②
③
⑧
⑤
④
⑦
⑥

2) EMS in Boat Deck (ST’BD side)
① GAS Emission
System & Blower Box

Case Study B:
Installed in Upper Deck
(UV type)

Starboard Side of Vessel

Laser Scanning Data (Photo + Scan data)

Vessel Photo

1. Feasibility Review (4 vessels, all same)
BWMS Instal. Location (MC)- ST’BD No.5 Cargo Tank
① Filter Unit ② Flow Meter ③ U.V Unit ④ Buster Pump

1. Feasibility Review (4 vessels, 1 vessel different)
BWMS location (MC)- ST’BD NO.5 CARGO TANK
Has to move N2 Tank STB’D  PORT
STB’D VIEWPORT VIEW

1. Feasibility Review (4 vessels, all same)
Gymnasium
CABLE TRAY
BWMS Eelctric Equip. Postion - Gymnasium
① Main Panel ② BWMS Control Panel ③ REPEAT PANEL  Gymnasium

Installation Environment Review
Moving Equipment Method
① Crane Capacity ( 5.0Ton x 3.2 – 17.5m) : need to consider onshore crane
② Gymnasium Door Size (Main & Control Panel)  690 X 1980
 Possible to transfer using by existing Door

1. Feasibility AVEVA 3D Modeling
E3D Modeling + Scan Data (Point Cloud)

1. Feasibility AVEVA E3D Modeling
E3D Modeling + Scan Data (Point Cloud)

1. Feasibility AVEVA E3D Modeling
E3D Modeling + Bubble View

Retrofit Engineering(LNG Retrofit Project)

[ 118 ton ] Engine Spec.
1) M/E : Deutz MWM TBD 616 V 12 / 979 PS 2,100 rpm
2) G/E : Daewoo PNJ (D1146) / 126 PS 1,800 rpm
[ Busan ] LNG Fueled Retrofit – 118ton Patrol Ship

[ Busan ] LNG Fueled Retrofit – 118ton Patrol ship

Point Cloud Data
Outfitting (Pipe) All
[ Busan ] LNG Fueled Retrofit – 118ton Patrol ship
Equipments (Panel etc)

[ Busan ] LNG Fueled Retrofit – 118ton Patrol Ship
Structure Piping
Cable-way ALL parts

Copyright © 2013 AVEVA Solutions
Limited and its subsidiaries.
All rights reserved.
AVEVA E3D
Modelling
Reference

AVEVA E3D Modeling
1) Laser Scanning Data

AVEVA E3D Modeling
2) BWMS M/C Modeling with Cloud Point

AVEVA E3D Modeling
3) BWMS Pipe Modeling with Cloud Point

Activity of Marketing Events
1. 2016
SeaJapan 2016, Tokyo
Offshore Korea 2016, Busan
2. 2017
GasTech 2017, Tokyo (Chiba)

Marketing Event: SeaJapan 2016 (Japan Big Site)

Marketing Event: Offshore Korea 2016 (BEXCO)

Marketing Event: GasTech 2017 (Japan Chiba)

Bocad Pilot Project(1)
400ton Charing Ladle Crane / KY E&C
GA Drawing

400ton Charing Ladle Crane / KY E&C

400ton Charing Ladle Crane(Sample drawing) / KY E&C

Project Summary
 Project Period & Modeling scope
 Period : 6 weeks , about 200 m/h , 1 man work
 Modeling : Structure Assy. Main/Aux Trolley Assy.
 Drawing : 2 page Sample drawing
 Bocad Related Future Plan
 Primary Drawing Creation
 Sample Drawing Creation and Related Assembly Shop drawing Creation
 Planned Training(After 2017.05 ):
 Bocad Advanced Course
 Boedit(Macro) Course

A-Frame Structure(Original Version)/ Pioneer
GA Drawing

A-Frame Structure(Original Version) / Pioneer

A-Frame Structure Drawing (Original Version) / Pioneer

Bocad Pilot Project(2-1)
A-Frame Structure(Modified Version) / Pioneer

Bocad Pilot Project(2-1)
A-Frame Structure drawing (Modified Version) / Pioneer

Bocad Pilot Project(2,2-1)
Project Summary
 Project Period & Modeling Scope
 Period : total 8 weeks , about 300 m/h , 1 man work(new employee)
 Modeling : A-Frame FWD, Aft section, Bkt. & D.PL.
 Drawing : 10 page drawing
 Add Production Drawing
 Auto BOM Drawing
 Etc. Drawing (Ass’y, Shop..)

Wind Turbine Hull Structure/ Mastek
GA Drawing

Wind Turbine Hul Structure/ Mastek

Wind Turbine Hul Structure(drawing)/ Mastek

Project Summary
 10 Days , 80 m/h , 1 man work
 Modeling : Main Column, Side Column
 Drawings : 13 page Structure drawing
 Macro Function apply (Boedit, FFEIN)
 Stiffener End Detail, Structure Touch part etc.
 Auto Drawing
 Assembly / Shop / Pipe unfolding drawing

Pedestal Deck Crane / Pioneer (Proceeding)
GA Drawing

Pedestal Deck Crane / Pioneer (Proceeding)

Project Summary(proceeding)
 8 Days , 64 m/h , 1 man work
 Modeling : PEDESTAL, UPPER POST, PLATFORM
 Continue Modeling
 JIB, HPU HOUSE, CONTROL CABIN etc.
 Bocad FFEIN Training (End of June)
 Stair, Hand Rail etc.
 Production Drawing write

Newgen overall main introduction material (for europe retrofit)

Recommended

Recommended

More Related Content

What's hot

What's hot (19)

Similar to Newgen overall main introduction material (for europe retrofit)

Similar to Newgen overall main introduction material (for europe retrofit) (20)

Recently uploaded

Recently uploaded (20)

Newgen overall main introduction material (for europe retrofit)