* A dynamic, versatile and results-oriented Civil Structural Engineer with over 8+ years of outstanding experience including experience in GCC in spearheading initiatives in the Conceptual design, structural analysis, Detailed Engineering, constructability studies and supervision for several types of (Concrete & Steel) structures as EPC, Feed projects in oil & gas and as well as complex Mixed-use buildings in construction area. Seeking a challenging position in Civil Structural Engineering (CSE) Multi-large Engineering Project within a professional firm to contribute accrued skills in formulating organizational objectives and charting a mutually beneficial growth path.
* Hard working and focused, honest and reliable, good effective interpersonal communication skills to work in a multi‐cultural environment, good team management skills
* Have the ability to adopt any new technologies, product or skills in relatively short time through employment & self‐study, ability to Accept and Learn From Criticism
I have 8+ years of experience in Oil, Gas and Petrochemical Plant projects as Civil /Structural Design Engineer.
I have experience of working in Middle East – Kuwait and Oman.
I have worked for basic design, FEED, detailed engineering and construction support phases of the projects which has given me an experience in executing the project from its very beginning.
Involved in the execution of large green field projects and brown field jobs.
I have performed design for most of the oil and gas structures like pipe racks, equipment structures, technological structures, platforms, pipe supports, vessel supporting structures using STAAD.Pro and various Civil foundations using Mat 3D.
Proficient in Civil Engineering application software’s like STAAD.Pro, Mat 3D, AutoCAD and General Engineering Software.
Experience in international codes for structural design. (BS, AISC,API and IS)
I have 8+ years of experience in Oil, Gas and Petrochemical Plant projects as Civil /Structural Design Engineer.
I have experience of working in Middle East – Kuwait and Oman.
I have worked for basic design, FEED, detailed engineering and construction support phases of the projects which has given me an experience in executing the project from its very beginning.
Involved in the execution of large green field projects and brown field jobs.
I have performed design for most of the oil and gas structures like pipe racks, equipment structures, technological structures, platforms, pipe supports, vessel supporting structures using STAAD.Pro and various Civil foundations using Mat 3D.
Proficient in Civil Engineering application software’s like STAAD.Pro, Mat 3D, AutoCAD and General Engineering Software.
Experience in international codes for structural design. (BS, AISC,API and IS)
Seeking a challenging Position of Civil/Structural Draftsman & Revit which will offer me professional growth as well as future career advancement opportunities in a renowned organization. I am certain that my presence in your team will prove to be beneficial to your organization and for my professional growth.
JDs of Piping Engineer
1. Review of Bid documents, scope of work & client specification to kick off the project.
2 Designing of complete Skid mounted modular packages for complete EPCC Job as per Project Specifications and applicable codes and standards
3 Review of vendor documents to make sure compliance of Client Specifications and applicable codes & standards e.g. data /cut sheets of manual valves/instruments etc.
4. Preparation of package data sheets, reflecting all technical & vendor data for Client submission.
5. Leading and assigning piping tasks to team of design engineers & draftsmen.
6. Dealing with vendors to transmit technical requirements and closing of vendor’s TQ(s) specially piping material including valves, rupture discs, strainers, isolation kits etc.
7. Coordination with Client for approval for vendor data
8. 3D Modeling of the skids as per PID, project specifications, applicable codes (B31.3, API & ASME) and good industrial practices(PIPs).
9. Design Calculation for skid mounted modular packages and incorporation of changes in 3-D Model (if any) based on process requirements.
10. Issuing complete MTO(s) and MR(s) for entire modular packages.
11. Follow Up with Engineering Team for all Engineering Deliverables as per Project Specifications.
12. Follow up with engineering and fabrication team to meet the project schedule.
13. Piping Layout Drawings, Top View Equipment Layouts & Piping General Arrangement Drawings.
14. Making sure issuance of Piping Fabrication Drawings (Isometrics) with respect to correct rating, schedule and material.
15. Stress analysis based on project specifications and ASME B31.3.
16. Modify and revise designs to correct operating deficiencies or to reduce production problems.
17. Modification drawings of revamp project(s)
18. As building of Modular Packages.
19 Pre Commissioning Activities at Nigeria Site. Mechanically Hand Over of Skid Packages to Commissioning Team.
Seeking a challenging Position of Civil/Structural Draftsman & Revit which will offer me professional growth as well as future career advancement opportunities in a renowned organization. I am certain that my presence in your team will prove to be beneficial to your organization and for my professional growth.
JDs of Piping Engineer
1. Review of Bid documents, scope of work & client specification to kick off the project.
2 Designing of complete Skid mounted modular packages for complete EPCC Job as per Project Specifications and applicable codes and standards
3 Review of vendor documents to make sure compliance of Client Specifications and applicable codes & standards e.g. data /cut sheets of manual valves/instruments etc.
4. Preparation of package data sheets, reflecting all technical & vendor data for Client submission.
5. Leading and assigning piping tasks to team of design engineers & draftsmen.
6. Dealing with vendors to transmit technical requirements and closing of vendor’s TQ(s) specially piping material including valves, rupture discs, strainers, isolation kits etc.
7. Coordination with Client for approval for vendor data
8. 3D Modeling of the skids as per PID, project specifications, applicable codes (B31.3, API & ASME) and good industrial practices(PIPs).
9. Design Calculation for skid mounted modular packages and incorporation of changes in 3-D Model (if any) based on process requirements.
10. Issuing complete MTO(s) and MR(s) for entire modular packages.
11. Follow Up with Engineering Team for all Engineering Deliverables as per Project Specifications.
12. Follow up with engineering and fabrication team to meet the project schedule.
13. Piping Layout Drawings, Top View Equipment Layouts & Piping General Arrangement Drawings.
14. Making sure issuance of Piping Fabrication Drawings (Isometrics) with respect to correct rating, schedule and material.
15. Stress analysis based on project specifications and ASME B31.3.
16. Modify and revise designs to correct operating deficiencies or to reduce production problems.
17. Modification drawings of revamp project(s)
18. As building of Modular Packages.
19 Pre Commissioning Activities at Nigeria Site. Mechanically Hand Over of Skid Packages to Commissioning Team.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
1. PHANI KRISHNA BADIPATI
Chennai, Tamilnadu +91 7207160392● ● phanikrishnab@gmail.com
PROFILE / OBJECTIVE
A dynamic, versatile and results-oriented Civil Structural Engineer with over 8+ years of outstanding experience
including experience in GCC in spearheading initiatives in the Conceptual design, structural analysis, Detailed
Engineering, constructability studies and supervision for several types of (Concrete & Steel) structures as EPC,
Feed projects in oil & gas and as well as complex Mixed-use buildings in construction area. Seeking a challenging
position in Civil Structural Engineering (CSE) Multi-large Engineering Project within a professional firm to
contribute accrued skills in formulating organizational objectives and charting a mutually beneficial growth path.
EXPERTISE / KEY SKILLS
● Oil and Gas field; high voltage Power sub-station buildings, Steel Structures, Service facilities, and infrastructures Civil
works within Oil and Gas EPC & FEED Projects.
● Industrial field; Steel Structures plants, warehouses, platforms, Sheds, and other services facilities.
● Civil and Structural Engineering, Inter Departmental/Discipline Information transfer (IDIT) (9Architectural, Electrical,
HVAC, MEP, Cross Functional Co-ordination).
● Principal Design, Detail Engineering, Specifications, Technical Reports, Structural Modeling, Research, Design calculations,
Seismic / lateral loads studies for all of Concrete, Steel structures.
● Familiarity with different International codes & standards including, American (AISC 360LRFD 13th, ACI-318, ASCE 7-05),
UBC and IBC), British & EURO (BS-5950, BS-8110, BS 8666, BS-6399), Indian (IS 800, IS-456, IS-1893, IS 13920, IS 875, IS
3370).
● Quality Audit, Co –ordination & Liaison, Inter-personal Skills, Analytical Skills.
● Work on analysis and design of structures using professional software packages: Bentley STAAD pro V8i, SP3R, MAT3D,
CSI ETABS, Math CAD, CSI SAFE and others for the successful execution of the project.
PROFESSIONAL EXPERIENCE & CAREER PASS
Petrofac Engineering Services India Pvt. Ltd., Chennai August 2015 – Present
Structural Engineer (Civil)
Client: Petroleum Development of Oman -PDO (Shell DEP’s followed) Website: http://www.pdo.co.om
Projects: Rabab Harweel Intigrated Project (RHIP) & Yibal Khuff Project (YKP), Oman
Responsibilities:
● Actively involved in Civil Structural Engineering workload delivery while understanding the importance of technical
accuracy with a high attention.
● Gained invaluable experience in Oil & Gas Field, power sub-station buildings, Pipe rack structures, pinned bass plate
design, anchor bolt design and isolated foundation.
● successfully organized/attend internal & external presentation, Design review meeting, and coordination meetings with
Clients.
● Work independent, Supervise a team of designers in carrying out engineering works, and act as a Instrumental on the
project.
● Ensure discipline engineering work is performed to the correct high quality standard.
● Perform and manage Civil structural engineering works, which includes but not limited to, Review &Prepare civil
structural engineering documents/drawings as per Master Deliverable Documents Register (MDDR).
2. PHANI KRISHNA BADIPATI
Chennai, Tamilnadu +91 7207160392● ● phanikrishnab@gmail.com
● Review contract requirements for project execution, Tender specifications identify requirements and scope of work
(SOW).
● Accountable for Conceptual design, Detail Engineering, Check & preparation of Specifications & Reports, Structural
Modeling, Design and analysis calculations, Seismic/lateral load studies for all of Concrete, Steel and Civil works.
● Conduct structural analysis and design of various types of RCC & Steel structures for both superstructure and
substructure such as Sub-station & control buildings, Industrial buildings, offices buildings.
Aker Solutions, Mumbai Nov. 2014 to July 2015
Structural Engineer (Civil)
Client: Kuwait National Petroleum Corporation-KNPC (Shell DEP’s followed) Website: http://www.knpc.com
Project: Clean Fuels Project (CFP)
Kuwait National Petroleum Company's (KNPC) Clean Fuels Project (CFP) involves the upgrade and integration of the Mina Abdulla
(MAB) and Mina Al Ahmadi (MAA) refineries.
Responsibilities:
● Modeling, Analysis and Design of Substation Buildings, Pipe rack, Equipment Supported Structures, Foundation for
Vertical Vessel, Design of pit for Horizontal Vessel, Base plate (Fixed &Pinned), Anchor bolt design & isolated
foundation.
● Accountable for Design concepts, Detail Engineering, Structural Modeling, Design and Analysis Calculations, Seismic /
Lateral load studies for the Structures In the Plant.
● Work effectively in as multi-disciplinary project team to implement structural requirement.
● Organize, and prepare Steel/Concrete detail drawings, Steel fabrication/erection drawings using appropriate software.
● Undertook hand calculations to supplement and refine analysis package generated code checks and structural
behaviour.
NCC POWER PROJECTS LTD., HYDERABAD Sept. 2012 to Sept.2014
Structural Engineer (Civil)
Project: 2 x 600 MW Thermal Power Project, Nellore Website: http://www.tce.co.in
Responsibilities:
● Astutely worked on Sea water Intake underground tank (35 mx15mx15m), Pipe rack, Electrical and maintenance Building,
● Familiar with analysis, design & detailing of super structure and piled raft. (With 198 nos. piles of 750 mm Dia.)
● Instrumental in preparing the design of structural elements by creating our own excel spreadsheets, and using variety of
Analysis software package, and also in attending the vendor meetings to be clear and consistent in approach to
Structural Engineering Design.
● Co-ordinated Project Structural work with alliance team members recommending solutions for various items/issues.
3. PHANI KRISHNA BADIPATI
Chennai, Tamilnadu +91 7207160392● ● phanikrishnab@gmail.com
Mumbai Mono Rail Project: Manual design of 20m spans ISMB 600 castellated beam made of equivalent ISMB 450 in accordance
with IS-800-2007 code of practice. (Code of Practice for Design of Structural Steel by Limit State Method).
Group Housing Project: Modeling, Analysis & Design of G+17 tall buildings of 8 nos. of blocks (Block-A to H- 780 Flats) Using
ETABS Software for Superstructure & in SAFE software for Raft Foundation (1100 mm thk.)
Larsen & Toubro Ltd. (L&T), Chennai Dec. 2007 to
July 2012
Structural Engineer (Civil)
Project: Raw Mill Feeder Steel Building in Cement plant, Angola
Client: Fábrica de Cimento do Kwanza Sul (FCKS)
Responsibilities:
● Prepared economical designs (Structural related) within the framework of statutory regulations for project facilities as per
the requirements and specifications issued by clients/ consultants.
● Defined initial structural drawings and sketches for approval by clients/consultants.
● Formulated structural load analysis, design calculations and other relevant details for approval by clients/consultants.
● Framed final set of drawings for submission to the statutory authorities for their approval.
Project: Calciner Building, Zincox Client:
Responsibilities:
● Performed and managed structural engineering project, which includes but not limited to, structural engineering
Calculations, design and analysis of Calciner Building.
● Preparing details and list of reinforcement shop drawings for concrete structures.
● Proactively prepared a full set of drawings along with relevant Annexure for submission to the relevant statutory
authorities.
Project: Sidra Medical & Research Centre, (SMRC)- QATAR
Client/Consultants: AECOM / ELAABRE BECKET/OHL CONTRAC , ,
Responsibilities:
● This is a Seven storey Hospital building with 1m healing garden in central floor with a skylight, slab system is a Flat slab
system with the drop panel analyzed in ETABS Software, super structure is resting on RAFT foundation (analyzed in SAFE)
with 1.5 m thick.
4. PHANI KRISHNA BADIPATI
Chennai, Tamilnadu +91 7207160392● ● phanikrishnab@gmail.com
● Analysis and Design of super structure done by ETABS (3D Modeling) as per British standard.
● Raft analysis and design done in SAFE (Foundation & Slab Design) British standard.
● Preparation of Bar Bending Schedule and Construction Shop drawings.
EDUCATION:
JNT University (Campus), Hyderabad.
Masters of Technology, Structural Engineering, 2007
First Class with Distinction
National Institute of Technology, NIT – Nagpur.
Bachelor of Technology, Civil Engineering, 2004
First Class
TRAININGS:
● Undergone “Capability Maturity Model Integration (CMMI)” training programmes at Larsen & Toubro Ltd. Powai corporate
office.
● Training In Connection Design Software “Limcon” at “Petrofac Engineering Services India Ltd”
PERSONAL INFORMATION:
● Birth Date: 8 th April 1983
● Gender: Male
● Nationality: Indian
● Languages: English, Hindi, and Telugu
PASSPORT DETAILS:
Passport No.: K8537735
Issue Date: 12-10-2012
Expiry Date: 11-10-2022
PROFESSIONAL REFERANCES:
* Available upon request.