This document discusses bearing selection for pumps. It explains that pump bearings often fail for reasons other than fatigue, such as improper loading. The key factors in selecting a bearing are the operating loads, temperatures, shaft fits, and speed. Bearings require a minimum thrust load to maintain proper ball tracking. Angular contact bearings with a higher contact angle require more thrust. A preload or clearance is used to ensure the minimum thrust load is met. The document provides guidance on selecting the appropriate bearing type for different pump applications and conditions.
Bearing handbook for electric motor skfducnamtrinh
The document is a handbook for electric motor bearings from SKF that provides specifications and information about various bearing types. It includes speed ratings, dimensions, installation tips, lubrication recommendations, and other technical details for SKF deep groove ball bearings in their 6200 and 6300 series. The handbook aims to help users select, install, and maintain SKF bearings for optimal electric motor performance.
The document provides specifications for various types of machine tool and automotive bearings, including journal bearings, sheave bearings, wheel bearings, and angular contact ball bearings. It includes the bearing number, limiting speed, boundary dimensions, basic dynamic and static load ratings, and lubrication information for each bearing type. The bearings listed are for precision machine tools, automotive applications, rolling stocks, and specific applications. High-speed angular contact ball bearings, combination angular contact ball bearings, and double-direction thrust angular contact ball bearings are featured with their respective specifications.
The document provides information about various types of rolling bearings including their dimensions and specifications. It lists many bearing part numbers along with their dimensions. It also covers topics such as bearing selection, load ratings, speeds, fits, clearances, lubrication, materials, handling, damage prevention, and packaging. The document appears to be a catalog for rolling bearings from a manufacturer.
This document is the introduction to NSK's revised rolling bearing catalog (CAT. No. E1102e). It provides an overview of the catalog's contents and structure. The catalog contains general information about rolling bearing types and selection criteria. It also includes extensive tables listing bearing part numbers, dimensions, and design data. The introduction explains that the catalog was revised to reflect new products, standards revisions, and better serve customers' needs for high performance bearings. It aims to help users select the optimal bearing for their application and notes NSK's engineering support is available if needed.
The document provides information about rolling mill bearing configurations and designs. It discusses various bearing types used in work rolls and back-up rolls, including TQO, TQITS, and CRB bearings. It also covers sealing, lubrication methods like grease, oil mist, and circulating oil, and considerations for mounting and installing different bearing types.
The document discusses vibration monitoring techniques for detecting rolling element bearing failures. It describes the different frequency regions of vibrations produced by bearings, including the rotor vibration region, prime spike region, and high frequency region. It then explains different transducer systems that can be used, including REBAM probes that directly measure bearing vibrations and casing vibration measurements. The key conclusions are that rotor vibration and prime spike measurements from permanent probes or casing sensors are the primary techniques for monitoring bearings and determining when replacement is needed, while high frequency measurements can provide early failure indications but require closer monitoring due to changing readings.
This document provides information on Caterpillar's CEMA C, D and E series surface conveyor structure products. It describes the various carrying idlers, steel rolls, EXALON polyethylene rolls, rubber disc return idlers, and electronic quality tracking systems that are designed to transport bulk materials reliably in different applications. The document also notes that all products conform to CEMA standards and are intended to provide long life, high reliability, and superior performance.
Sliding Contact Bearing Theory Prof. Sagar DhotareSagar Dhotare
In present ppt covers following points:
Introduction of Sliding Contact Bearings
Classification
Applications
Different lubrications systems
Hydrodynamic bearing concept and working
Comparison between sliding and rolling contact bearings
PETROFF’S EQUATION For Hydrodynamic Journal Bearing
Dimensionless Parameters used in SCB
Design procedure for Hydrodynamic Journal Bearing
Bearing handbook for electric motor skfducnamtrinh
The document is a handbook for electric motor bearings from SKF that provides specifications and information about various bearing types. It includes speed ratings, dimensions, installation tips, lubrication recommendations, and other technical details for SKF deep groove ball bearings in their 6200 and 6300 series. The handbook aims to help users select, install, and maintain SKF bearings for optimal electric motor performance.
The document provides specifications for various types of machine tool and automotive bearings, including journal bearings, sheave bearings, wheel bearings, and angular contact ball bearings. It includes the bearing number, limiting speed, boundary dimensions, basic dynamic and static load ratings, and lubrication information for each bearing type. The bearings listed are for precision machine tools, automotive applications, rolling stocks, and specific applications. High-speed angular contact ball bearings, combination angular contact ball bearings, and double-direction thrust angular contact ball bearings are featured with their respective specifications.
The document provides information about various types of rolling bearings including their dimensions and specifications. It lists many bearing part numbers along with their dimensions. It also covers topics such as bearing selection, load ratings, speeds, fits, clearances, lubrication, materials, handling, damage prevention, and packaging. The document appears to be a catalog for rolling bearings from a manufacturer.
This document is the introduction to NSK's revised rolling bearing catalog (CAT. No. E1102e). It provides an overview of the catalog's contents and structure. The catalog contains general information about rolling bearing types and selection criteria. It also includes extensive tables listing bearing part numbers, dimensions, and design data. The introduction explains that the catalog was revised to reflect new products, standards revisions, and better serve customers' needs for high performance bearings. It aims to help users select the optimal bearing for their application and notes NSK's engineering support is available if needed.
The document provides information about rolling mill bearing configurations and designs. It discusses various bearing types used in work rolls and back-up rolls, including TQO, TQITS, and CRB bearings. It also covers sealing, lubrication methods like grease, oil mist, and circulating oil, and considerations for mounting and installing different bearing types.
The document discusses vibration monitoring techniques for detecting rolling element bearing failures. It describes the different frequency regions of vibrations produced by bearings, including the rotor vibration region, prime spike region, and high frequency region. It then explains different transducer systems that can be used, including REBAM probes that directly measure bearing vibrations and casing vibration measurements. The key conclusions are that rotor vibration and prime spike measurements from permanent probes or casing sensors are the primary techniques for monitoring bearings and determining when replacement is needed, while high frequency measurements can provide early failure indications but require closer monitoring due to changing readings.
This document provides information on Caterpillar's CEMA C, D and E series surface conveyor structure products. It describes the various carrying idlers, steel rolls, EXALON polyethylene rolls, rubber disc return idlers, and electronic quality tracking systems that are designed to transport bulk materials reliably in different applications. The document also notes that all products conform to CEMA standards and are intended to provide long life, high reliability, and superior performance.
Sliding Contact Bearing Theory Prof. Sagar DhotareSagar Dhotare
In present ppt covers following points:
Introduction of Sliding Contact Bearings
Classification
Applications
Different lubrications systems
Hydrodynamic bearing concept and working
Comparison between sliding and rolling contact bearings
PETROFF’S EQUATION For Hydrodynamic Journal Bearing
Dimensionless Parameters used in SCB
Design procedure for Hydrodynamic Journal Bearing
This document discusses various causes of bearing failure including excessive loads, overheating, brinelling, fatigue, contamination, lubricant failure, corrosion, misalignment, loose fits, and tight fits. For each cause, symptoms and recommended corrective actions are provided. The overall document serves to educate about common bearing failures and how to prevent or address them.
Tải miễn phí sổ tay bảo dưỡng vòng bi công nghiệp của SKF. Sổ tay bảo dưỡng vòng bi SKF là tài liệu hướng dẫn bảo dưỡng do SKF soạn thảo, với nội dung chỉ dẫn giúp bạn bảo dưỡng đúng cách, an toàn và chuyên nghiệp.
Carter Manufacturing Inc specializes in prototyping and manufacturing high precision bearings for both standard and specialized applicationsin industries such as chemical, food processing and industrial.To know more visit: http://www.carterbearings.co.uk/carter/cam-followers/
National Bearing Corporation was founded in 1946 and has since grown to be the leading bearing manufacturer in India. It has four production plants across India with a total annual capacity of 150 million bearings. The document provides details on NBC's manufacturing processes, quality control measures, product range, customer base, and 5S principles implemented across its facilities.
Rolling element bearings transmit loads through rolling contact and provide lower coefficients of friction than sliding contact bearings. They are composed of an inner race, outer race, rolling elements (balls or rollers), and a cage. Ball bearings are further classified as deep groove, angular contact, or filled notch types. Roller bearings use cylindrical or tapered rollers and have higher load capacity than ball bearings. Bearing life is rated based on the number of revolutions or hours it can operate before spalling or pitting failure occurs, with an L10 life rating meaning 10% of tested bearings will fail by that point.
This document summarizes the mounting of machine elements for a concrete mixer. It discusses the main components of a concrete mixer including bearings, worm gears, drums, yokes, sprockets, and frames. It then focuses on the mounting of bearings and gears. For bearings, it describes the types of bearings and different mounting methods, including both bearings fixed or one floating. For gears, it outlines different attachment methods like using fixing screws, keys and circlips, cotter pins, and locking assemblies. Finally, it provides an example of selecting bearings from a manufacturer's catalog.
This is a presentation about ball bearing manufacturing manufacturing process. There are mainly 6 parts of knowledge included in this presentation. Please visit
This document summarizes a presentation on improving wind turbine drivetrain bearing reliability. It discusses common bearing damage modes in the generator, gearbox, and main shaft and presents upgrades to address them including wear-resistant coatings, case carburization, improved geometries and materials. Specific enhancements are outlined for main shaft spherical roller bearings, planetary and high-speed gearbox bearings, and generator bearings. Test results of upgraded bearings show reduced wear and longer lifespans. The presentation emphasizes using condition monitoring and lubrication best practices to further improve bearing health and reliability.
We specialize in the manufacturing and rebuilding of screws, barrels, removable mixers, tips, end caps, nozzles, and a large variety of other specialized machining components, including augers, tie bars, and rotors.
This document is the general catalogue for SKF, a manufacturer of bearings and related products. It provides an overview of the catalogue, noting it contains standard bearings and accessories. It also describes updates made to the technical section, including new models for determining friction and lubricant viscosity. The catalogue aims to match customer needs and make products available worldwide.
UNASIS precision bearing cam followers and yoke rollers offer a great alternative to the mainstream brands, coupled with greater flexibility in terms of range, pecification and size which allows you to design with the freedom of knowing there is a bearing size to suit.
For more details visit: http://www.carterbearings.co.uk/unasis/
NBC Bearings is a leading Indian bearing manufacturer and exporter founded in 1946. It produces over 100 million bearings per year in over 1000 sizes for customers in India and 21 other countries. The document provides details about NBC's production process, including its ball bearing and grinding departments. It describes the key steps of heating steel rings in a Chougai-ro furnace, grinding the inner and outer rings and tracks on various machines, assembling the bearings, and final quality checks before packaging and shipping.
In this illustrated guide, you’ll get the details to build a 632 Mountain Motor: 1,115 hp on 114-octane race gas on the dyno, fed through a single 1,150-cfm Holley Pro Dominator mounted on a profiler tunnel ram intake. Also included in the guide is a parts list and additional engine building product recommendations.
The document discusses various case studies of gearbox diagnosis from different industries using different vibration analysis techniques. These include a misaligned gearbox diagnosed using time waveform analysis showing directional forces, a cracked tooth problem in a cement mill gear diagnosed using high crest factor readings indicating sharp peaks, and a flexible gearbox support structure causing shaft failures diagnosed using operational deflection shapes analysis. The case studies demonstrate the need to use multiple analysis tools to effectively diagnose different types of gearbox faults.
There are three main types of bearings: rolling element bearings, bushings, and journal bearings. Rolling element bearings have balls or rollers that reduce friction. Bushings use sliding contact between surfaces, with materials chosen to minimize wear. Journal bearings use a fluid film to separate sliding surfaces.
Bearing life is calculated theoretically based on the number of cycles for 10% of bearings to develop a specified size spall or pit due to subsurface fatigue cracks. While the calculation assumes maximum system loads, average loads are 50-80% of maximum, increasing bearing life. Proper lubrication is important to maximize actual bearing life in applications.
This document discusses bearings and lubrication. It describes the main functions of bearings as supporting rotating shafts to transmit power and reduce friction. There are two main types of bearings: rolling contact bearings, which transfer load through rolling elements like balls and rollers; and journal or sleeve bearings, which transfer load through a thin film of lubricant. Key considerations in bearing selection include life, speed, load type, and accuracy requirements. Common bearing types are described like ball, roller, tapered, and thrust bearings. Proper lubrication and factors like bearing load and speed determine bearing life.
This document discusses bearings and their functions. It describes the main types of bearings as plain or sliding bearings, and rolling or anti-friction bearings like ball and roller bearings. Ball and roller bearings have less friction than plain bearings due to their design involving balls or rollers that provide rolling motion rather than sliding contact. The document outlines different types of ball and roller bearings, how they are constructed, suitable applications, proper installation and positioning of bearings, and techniques for adjusting axial play.
This document provides information on selecting wheels and bearings for caster applications. It discusses various wheel and bearing types including sealed precision ball bearings, annular ball bearings, flanged ball bearings, caged roller bearings, roller bearings, precision tapered roller bearings, Delrin bearings, plastic sleeve bearings, Oilite bearings, and plain bore wheels. Key factors that affect wheel selection are the load capacity, floor conditions, usage, and other application specifics. The bearings are listed from easiest to hardest to maintain based on their rolling ease and lubrication needs.
This document provides information on bearings, including their functions, classifications, types, components, and proper installation. It can be summarized as follows:
Bearings support rotating shafts and allow frictionless rotation. They are classified as plain or rolling bearings. Rolling bearings like ball and roller bearings use rolling elements to reduce friction compared to plain bearings. Proper bearing selection, installation, and maintenance are important to ensure optimal performance and lifespan.
Bearings are used to support rotating shafts and allow frictionless rotation. Plain or sliding contact bearings include journal, footstep, and thrust bearings which have direct sliding contact between the shaft and bearing material. Journal bearings support radial loads on a shaft running through the bearing. Footstep bearings support vertical shafts with axial loads. Thrust bearings support axial loads on a shaft passing through the bearing. Common bearing materials include brass, bronze, and babbitt metal which can be replaced if worn.
This document discusses various causes of bearing failure including excessive loads, overheating, brinelling, fatigue, contamination, lubricant failure, corrosion, misalignment, loose fits, and tight fits. For each cause, symptoms and recommended corrective actions are provided. The overall document serves to educate about common bearing failures and how to prevent or address them.
Tải miễn phí sổ tay bảo dưỡng vòng bi công nghiệp của SKF. Sổ tay bảo dưỡng vòng bi SKF là tài liệu hướng dẫn bảo dưỡng do SKF soạn thảo, với nội dung chỉ dẫn giúp bạn bảo dưỡng đúng cách, an toàn và chuyên nghiệp.
Carter Manufacturing Inc specializes in prototyping and manufacturing high precision bearings for both standard and specialized applicationsin industries such as chemical, food processing and industrial.To know more visit: http://www.carterbearings.co.uk/carter/cam-followers/
National Bearing Corporation was founded in 1946 and has since grown to be the leading bearing manufacturer in India. It has four production plants across India with a total annual capacity of 150 million bearings. The document provides details on NBC's manufacturing processes, quality control measures, product range, customer base, and 5S principles implemented across its facilities.
Rolling element bearings transmit loads through rolling contact and provide lower coefficients of friction than sliding contact bearings. They are composed of an inner race, outer race, rolling elements (balls or rollers), and a cage. Ball bearings are further classified as deep groove, angular contact, or filled notch types. Roller bearings use cylindrical or tapered rollers and have higher load capacity than ball bearings. Bearing life is rated based on the number of revolutions or hours it can operate before spalling or pitting failure occurs, with an L10 life rating meaning 10% of tested bearings will fail by that point.
This document summarizes the mounting of machine elements for a concrete mixer. It discusses the main components of a concrete mixer including bearings, worm gears, drums, yokes, sprockets, and frames. It then focuses on the mounting of bearings and gears. For bearings, it describes the types of bearings and different mounting methods, including both bearings fixed or one floating. For gears, it outlines different attachment methods like using fixing screws, keys and circlips, cotter pins, and locking assemblies. Finally, it provides an example of selecting bearings from a manufacturer's catalog.
This is a presentation about ball bearing manufacturing manufacturing process. There are mainly 6 parts of knowledge included in this presentation. Please visit
This document summarizes a presentation on improving wind turbine drivetrain bearing reliability. It discusses common bearing damage modes in the generator, gearbox, and main shaft and presents upgrades to address them including wear-resistant coatings, case carburization, improved geometries and materials. Specific enhancements are outlined for main shaft spherical roller bearings, planetary and high-speed gearbox bearings, and generator bearings. Test results of upgraded bearings show reduced wear and longer lifespans. The presentation emphasizes using condition monitoring and lubrication best practices to further improve bearing health and reliability.
We specialize in the manufacturing and rebuilding of screws, barrels, removable mixers, tips, end caps, nozzles, and a large variety of other specialized machining components, including augers, tie bars, and rotors.
This document is the general catalogue for SKF, a manufacturer of bearings and related products. It provides an overview of the catalogue, noting it contains standard bearings and accessories. It also describes updates made to the technical section, including new models for determining friction and lubricant viscosity. The catalogue aims to match customer needs and make products available worldwide.
UNASIS precision bearing cam followers and yoke rollers offer a great alternative to the mainstream brands, coupled with greater flexibility in terms of range, pecification and size which allows you to design with the freedom of knowing there is a bearing size to suit.
For more details visit: http://www.carterbearings.co.uk/unasis/
NBC Bearings is a leading Indian bearing manufacturer and exporter founded in 1946. It produces over 100 million bearings per year in over 1000 sizes for customers in India and 21 other countries. The document provides details about NBC's production process, including its ball bearing and grinding departments. It describes the key steps of heating steel rings in a Chougai-ro furnace, grinding the inner and outer rings and tracks on various machines, assembling the bearings, and final quality checks before packaging and shipping.
In this illustrated guide, you’ll get the details to build a 632 Mountain Motor: 1,115 hp on 114-octane race gas on the dyno, fed through a single 1,150-cfm Holley Pro Dominator mounted on a profiler tunnel ram intake. Also included in the guide is a parts list and additional engine building product recommendations.
The document discusses various case studies of gearbox diagnosis from different industries using different vibration analysis techniques. These include a misaligned gearbox diagnosed using time waveform analysis showing directional forces, a cracked tooth problem in a cement mill gear diagnosed using high crest factor readings indicating sharp peaks, and a flexible gearbox support structure causing shaft failures diagnosed using operational deflection shapes analysis. The case studies demonstrate the need to use multiple analysis tools to effectively diagnose different types of gearbox faults.
There are three main types of bearings: rolling element bearings, bushings, and journal bearings. Rolling element bearings have balls or rollers that reduce friction. Bushings use sliding contact between surfaces, with materials chosen to minimize wear. Journal bearings use a fluid film to separate sliding surfaces.
Bearing life is calculated theoretically based on the number of cycles for 10% of bearings to develop a specified size spall or pit due to subsurface fatigue cracks. While the calculation assumes maximum system loads, average loads are 50-80% of maximum, increasing bearing life. Proper lubrication is important to maximize actual bearing life in applications.
This document discusses bearings and lubrication. It describes the main functions of bearings as supporting rotating shafts to transmit power and reduce friction. There are two main types of bearings: rolling contact bearings, which transfer load through rolling elements like balls and rollers; and journal or sleeve bearings, which transfer load through a thin film of lubricant. Key considerations in bearing selection include life, speed, load type, and accuracy requirements. Common bearing types are described like ball, roller, tapered, and thrust bearings. Proper lubrication and factors like bearing load and speed determine bearing life.
This document discusses bearings and their functions. It describes the main types of bearings as plain or sliding bearings, and rolling or anti-friction bearings like ball and roller bearings. Ball and roller bearings have less friction than plain bearings due to their design involving balls or rollers that provide rolling motion rather than sliding contact. The document outlines different types of ball and roller bearings, how they are constructed, suitable applications, proper installation and positioning of bearings, and techniques for adjusting axial play.
This document provides information on selecting wheels and bearings for caster applications. It discusses various wheel and bearing types including sealed precision ball bearings, annular ball bearings, flanged ball bearings, caged roller bearings, roller bearings, precision tapered roller bearings, Delrin bearings, plastic sleeve bearings, Oilite bearings, and plain bore wheels. Key factors that affect wheel selection are the load capacity, floor conditions, usage, and other application specifics. The bearings are listed from easiest to hardest to maintain based on their rolling ease and lubrication needs.
This document provides information on bearings, including their functions, classifications, types, components, and proper installation. It can be summarized as follows:
Bearings support rotating shafts and allow frictionless rotation. They are classified as plain or rolling bearings. Rolling bearings like ball and roller bearings use rolling elements to reduce friction compared to plain bearings. Proper bearing selection, installation, and maintenance are important to ensure optimal performance and lifespan.
Bearings are used to support rotating shafts and allow frictionless rotation. Plain or sliding contact bearings include journal, footstep, and thrust bearings which have direct sliding contact between the shaft and bearing material. Journal bearings support radial loads on a shaft running through the bearing. Footstep bearings support vertical shafts with axial loads. Thrust bearings support axial loads on a shaft passing through the bearing. Common bearing materials include brass, bronze, and babbitt metal which can be replaced if worn.
This document discusses bearings, their functions, classifications, and types. It can be summarized as:
Bearings support rotating shafts and allow frictionless rotation. They are classified as plain or rolling bearings. Rolling bearings like ball and roller bearings use rolling elements to reduce friction compared to plain bearings. Common types include deep groove ball bearings, tapered roller bearings, and thrust ball bearings. Proper bearing selection, assembly, mounting, and lubrication are important to ensure low friction and long life.
This document discusses bearings and their functions. It describes how bearings support rotating shafts and reduce friction to allow for smooth rotation. There are two main types of bearings - plain/slider bearings which have a large contact area and high friction, and rolling/ball bearings which have less contact area and lower rolling friction. Ball and roller bearings are further described as having races, balls/rollers, and a cage that separates the balls to reduce friction. Common ball and roller bearing types and their applications are also outlined.
Bearings are devices that allow rotational or linear movement between contacting surfaces while reducing friction and handling loads. There are two main types: rolling contact bearings which use rolling elements like balls or rollers to transfer load, and journal or sleeve bearings which use a thin film of lubricant. Key considerations in bearing selection and design include load type and magnitude, speed, space limitations, accuracy needs, and desired life. Bearing catalogs provide load and life ratings to help selection.
RETOP Valve Repairing Grinder update to Model B.
In addition to the features of ordinary model of Valve Repairing Grinders, such as direct grinding after build up welding, omitting of turning, lapping etc. processes and integrated machining of sealing surface in one process, we add new features to our reinforced mode Valve Repairing Grinder Model B, so as to improve operational stability, increase the grinding efficiency, which cannot only be used for grinding of valve seat, valve element, but also grinding of other metal parts.
This document discusses anti-friction bearings used in machine tool design. It defines bearings and their purpose of allowing relative motion with minimal friction. It describes the broad classifications and types of ball and roller bearings, including deep groove ball bearings, self-aligning bearings, thrust ball bearings, angular contact ball bearings, cylindrical roller bearings, needle roller bearings, and tapered roller bearings. It discusses bearing requirements, types, dimensions, load capacities, lives, calculations, mounting, lubrication, and failure causes. It also covers spindle bearing arrangements and rigidity calculations.
Rolling contact bearings are called antifriction bearings because they have lower friction than sliding contact bearings. The document discusses the advantages and types of rolling contact bearings, including ball bearings and different types of roller bearings. It also covers standard dimensions, load ratings, reliability, materials used, and lubrication of ball and roller bearings.
Drilling is required to create openings in rock masses for tunneling. There are various types of drill jumbos suited for different tunnel cross-sections, including single boom, two boom, and three boom jumbos. Rock drilling uses impact and rotation to break the rock. Impact is generated by a piston striking the drill steel, while rotation is provided by a hydraulic motor or gears. Proper flushing, feed force, and bit condition influence the drilling rate. Hydraulic drifters require regular maintenance like checking for leaks and tightening bolts. Accumulators must be charged with nitrogen gas only.
This document provides an introduction to bearings and bearing design. It defines bearings and their purpose of supporting moving machine elements while allowing relative motion. Bearings are classified based on the direction of load and type of contact. Rolling contact bearings like ball and roller bearings are introduced, which have lower friction than sliding contact bearings. The document outlines the main parts of a ball bearing and provides steps for selecting an appropriate bearing for an application involving a 40mm shaft with 5000N of radial load and 3000N of thrust load operating at 400rpm. Through calculations, ball bearing SKF No. 6308 is determined to meet the load requirements.
The document discusses the selection and use of bearings. It describes the functions of bearings as supporting loads on shafts and locating the shaft position. It outlines types of bearings as sliding contact or rolling contact. Rolling contact bearings include ball bearings and roller bearings. When selecting a bearing, factors to consider include load type (radial, thrust, or combined), load capacity, dimensions, intended use conditions, and desired service life. Installation of ball bearings requires proper shaft and housing design, lubrication provision, and sealing.
Rolling contact bearings and design procedureJashavant singh
this slide will give you idea about the rolling contact bearing , its types application areas and also you will learn how to design rolling contact bearing ,
comparison between the rolling contact and sliding contact bearing , advantage and disadvantages.
Bearing Description about basic, types, failure causesPankaj
This document discusses different types of bearings. It begins by defining a bearing as a device that allows constrained relative motion between two parts, typically rotation or linear movement. It then classifies bearings based on the motions they allow and their principle of operation. The document goes on to describe various types of bearings in detail, including ball bearings, roller bearings, thrust bearings, tapered roller bearings, and cylindrical roller bearings. It provides information on the characteristics, advantages, applications, and physical features of each bearing type.
The document discusses motor bearings, including their classification, selection criteria, components, lubrication, and failure reasons. It describes the main types of bearings as ball bearings, roller bearings, and sleeve bearings. The selection criteria includes factors like speed, shaft diameter, weight, and load direction. Proper lubrication and preventing contamination are emphasized as important to avoid premature bearing failure.
Mahaveer Enterprises is an importer and trader of bearings and SKF plumber blocks established in 2006. It offers a variety of bearings from major brands for industries like machinery, textiles, and mining. The company prides itself on competitive prices, timely deliveries, and good client relations to maintain an edge over competitors in the market.
3. Bearings for Centrifugal Pumps:
Selection of the Proper Bearing Solution
The most common cause of pump bearing
failure is not fatigue
Thrust bearings for centrifugal pumps seldom
achieve the theoretical life specified by API and
ANSI standards. This is because pump bearings
usually fail from causes other than fatigue.
Causes include:
• Impact • Static vibration
• Contamination • Insufficient loading
• Excessive thrust • Misalignment
• Inadequate/ineffective
lubrication high enough to cause unacceptably high
operating temperatures. In this publication, the
Users tend to ignore the fact that bearings are minimum required thrust load for all bearings is
designed for specific operating conditions and listed. To select the proper bearing, the external
use the same bearing for most pump applica- loads, temperatures, shaft fits and speed must
tions. Consequently, the 40O single-row angular be considered. Only with this information can an
contact ball bearing is applied in applications optimum bearing solution be found. If the above
where it may not be the best choice. conditions cannot be determined, reasonable
assumptions must be made in order to make the
High contact angle vs. low contact angle initial bearing selection.
Bearings with low contact angles are designed Reasonable assumptions are:
primarily for radial loads. Bearings with high
contact angles are most suitable for thrust (axial) • Open impellers develop relatively
loads. Neither bearing does both well and high thrust load, usually toward the
compromises are often required to achieve intake (suction)
acceptable bearing performance. Pump applica- • Closed impellers develop relatively
tions are not consistent and loads may vary from low thrust load, usually toward the
high thrust, to near zero thrust, to thrust in the intake (suction)
opposite direction. High contact angle bearings • Double suction impeller pumps
require substantial thrust load in order to over- (always closed) usually have little or
come the centrifugal and gyroscopic forces no thrust load
acting on the balls and prevent ball skidding. • Thrust load in a direction opposite the
(The higher the contact angle, the more thrust intake (suction) is usually low
load required.) Low contact angle bearings These assumptions should be used only as a
require little or no thrust load to prevent ball guide for tentative bearing selection. Once the
skidding. In addition, remember that only one bearings have operated, the loads can be more
bearing in a pair, mounted back-to-back or face- accurately determined by observing the location
to-face, is thrust loaded. However, the unloaded and width of the ball path on the raceways.
bearing has the same minimum thrust load
requirement as the loaded bearing. Therefore, an
MRC offers the widest selection of ball
axial preload must be applied to the pair to be
bearings for pumps in the bearing industry
sure that both bearings have adequate thrust
load to overcome the centrifugal and gyroscopic A solution exists for nearly every combination of
forces. loads and speeds. Start the selection process
by referring to pages 2 and 3. The information
Assuring minimum required thrust load on these pages will guide you to the proper
Operating preload plus the external thrust on the bearings. Please contact MRC Bearing Services
primary bearing is additive and the load may be at 1-800-MRC-7000 for additional information
regarding bearing selection.
1
4. MRC Bearing Services 1-800-MRC-7000
Characteristic
Ball Bearing Type Cage Contact Performance
Angle Level Radial Axial Speed Radial Thrust
Stiffness Stiffness Capacity Capacity
ball- Extremely High
200S and 300S Series guided Very High
Single-Row two-piece 0º
Deep Groove pressed High
steel Moderate
ball- Extremely High
5200C and 5300C Series guided Very High
one-piece 30˚
Double-Row Angular Contact pressed High
steel Moderate
ball- Extremely High
5300UPG Series
Double-Row guided Very High
one-piece 40˚
Angular Contact machined High
Pump Bearing brass Moderate
ball- Extremely High
7200DU and 7300DU guided Very High
Single-Row Angular Contact two-piece 29˚
Duplex Pair pressed High
steel Moderate
7200PDU and 7300PDU design Extremely High
7200PJDE and 7300PJDE varies with
bearing Very High
7200PJDU and 7300PJDU 40˚
type High
Single-Row Angular Contact (brass mat’l
Duplex Pair – all types) Moderate
land- Extremely High
8000 Series guided 40˚ Very High
PumPac one-piece and
Bearing Set machined 15˚ High
brass Moderate
land- 40˚ Extremely High
8000AAB Series guided and Very High
PumPac Triplex one-piece 40˚ High
Bearing Set machined and
brass 15˚ Moderate
land- Extremely High
8000BB Series guided 15˚ Very High
PumPac Diamond one-piece and
Bearing Set machined 15˚ High
brass Moderate
97000U2 land- Extremely High
Duplex Tandem Pair guided Very High
Radial & Axial one-piece 29˚
Looseness in machined High
Bearing System bronze Moderate
97000UP2 land- Extremely High
Duplex Tandem Pair guided Very High
Radial & Axial one-piece 40˚
Looseness in machined High
Bearing System bronze Moderate
2
5. For
Applications
Details
Steady rest positions to accommodate radial load in centrifugal pumps. See
Most electric motors use this bearing to accommodate radial loads. Pages
Seldom used as a primary thrust bearing in centrifugal pumps. 8 – 13
Most often used in ANSI pumps with moderate thrust loads. 5200C and 5300C series See
ball bearings can also be used in the radial position when the radial load is excessive Pages
for 200S and 300S series single-row deep groove ball bearings.
14 – 19
For moderate speed centrifugal pumps. Used as thrust bearing where high thrust See
loads are expected. A retrofit-free bearing upgrade for API 610 Standard (5th Edition) Pages
and ANSI pumps in order to meet ANSI+ standards.
20 – 23
For high speed centrifugal pumps. This bearing can run at higher speeds than the See
7200PDU and 7300PDU series and requires less thrust load to maintain proper Pages
traction forces between the ball and raceway surfaces.
24 – 29
For moderate speed centrifugal pumps. Used as thrust bearings where high See
thrust loads are expected. Temperatures, loads, and shaft fits should be
Pages
known in order to establish proper preload or axial clearance.
30 – 45
For centrifugal pumps with heavy thrust loads that are not reversing or reverse only
momentarily. Very effective as a thrust bearing in high speed pumps when direction
See
of thrust is known. Forgiving in an application when thrust loads and temperatures Pages
have not been determined. 46 – 49
For pumps involving very heavy primary thrust loads. A PumPac “triplex” set See
contains two 40° bearings in tandem matched back-to-back with one 15° bearing. Pages
50 – 53
Balanced pumps, operating with light or no thrust loads at high speeds. (For See
example, double suction impeller pumps; including the popular axially split case or
“between bearings” design.) Similarly, pumps with closed impellers, balance holes,
Pages
and pump-out vanes that result in light thrust loads. 54 – 57
For vertical or other types of pumps where endplay is not a major concern. This See
bearing type will be specified for speeds higher than those accommodated by the Pages
97000UP2 series. This product is often used in ethylene stirrer motor applications.
58 – 61
For vertical or other types of pumps, as well as electric motor applications, where an See
extremely high thrust load is possible. Often used in ethylene reactors and deep water Pages
pumps.
58 – 61
3
6. MRC Bearing Services 1-800-MRC-7000
Why a Preload or Clearance?
Angular contact bearings require a minimum Angular contact bearings with a high contact
thrust load to keep the balls tracking at the angle require a heavier minimum thrust load
designed contact angle. With less than the than a bearing with a low contact angle.
minimum required thrust load, centrifugal force
will cause the balls to track at different contact Due to this fact, bearings with a low contact
angles on the outer ring and inner ring raceways. angle like the MRC PumPac® Diamond 8000BB
This condition will eventually result in premature series often work best in pumps where little or
bearing failure. no thrust load is present and the loads are
primarily radial in nature.
The thrust load is assured by providing an
adequate operating preload. Operating preload MRC offers a wide range of angular contact
is dependent upon: bearings for various application conditions,
including 15°, 29° and 40° contact angle
• Manufactured preload/clearance bearings.
• Shaft and housing fits
• Temperature differential between the Call MRC Bearing Services at
inner and outer rings 1-800-MRC-7000 for assistance
with selecting the proper bearing.
These charts show the manufactured axial clearance
and preload standards for angular contact sets.
Bore Axial Internal Clearance (unmounted)
diameter Class
d CA CB CC
over incl. .001 mm .0001 in .001 mm .0001 in .001 mm .0001 in
mm min max min max min max min max min max min max
Back-to-back – 10 4 12 1.6 4.7 14 22 5.5 8.7 22 30 8.7 12
10 18 5 13 2.0 5.1 15 23 5.9 9.1 24 32 9.4 13
18 30 7 15 2.8 5.9 18 26 7.1 10 32 40 13 16
30 50 9 17 3.5 6.7 22 30 8.7 12 40 48 16 19
50 80 11 23 4.3 9.1 26 38 10 15 48 60 19 24
80 120 14 26 5.5 10 32 44 13 17 55 67 22 26
120 180 17 29 6.7 11 35 47 14 19 62 74 24 29
180 250 21 37 8.3 15 45 61 18 24 74 90 29 35
Face-to-face 250 315 26 42 10 17 52 68 20 27 90 106 35 42
MRC 7000PJDE bearings are stocked with the CB execution.
Bore Preload (unmounted)
diameter Class
d GA GB GC
over incl. N lbf N lbf N lbf
Back-to-back mm min max min max min max min max min max min max
10 18 0 80 0 18 30 330 7 74 230 660 52 148
18 30 0 120 0 27 40 480 9 108 340 970 76 218
30 50 0 160 0 36 60 630 13 142 450 1280 101 288
50 80 0 380 0 85 140 1500 31 337 1080 3050 243 686
80 120 0 410 0 92 150 1600 34 360 1150 3250 259 731
120 180 0 540 0 121 200 2150 45 483 1500 4300 337 967
180 250 0 940 0 211 330 3700 74 832 2650 7500 596 1686
Face-to-face
250 315 0 1080 0 243 380 4250 85 955 3000 8600 674 1933
MRC 7000PJDU bearings are stocked with the GA execution.
4
7. Handling and Maintenance
Contamination
A high percentage of ball and roller bearing Shaft and Housing Fits
problems can be attributed to foreign matter The standard recommended shaft and housing
entering the system. Because bearings are fits are included in the technical data section for
highly sensitive to dirt and moisture, care must each individual bearing. The tolerances are
be taken to keep the bearings and pump cavity those recommended for bearings mounted on
clean. Testing has shown that particles passing solid steel shafts. The interference fit between
through a filter as fine as 5 microns may cause the bearing bore and the shaft journal causes a
severe damage. Experience has shown that reduction of clearance in the bearings and an
lubricating systems that pressurize the bearing increase in operating preload. Excessive preload
cavity, such as air-oil-mist, greatly reduce may result in a hot running condition. Bearings
contamination and increase bearing life. such as the 7000PDU that have a GA preload in
the unmounted condition usually employ a light
Lubrication interference fit such as an ISO h5 shaft fit. With
Generally, for ball bearings, it is a good rule to bearings that have internal axial clearance CB,
select an oil that will have a viscosity of at least heavier interference fits are usually acceptable.
70 SUS (13 cSt) at the bearing operating temper- Each time a pump or motor is rebuilt, both the
ature. From the chart on page 6, the operating shaft diameter and bearing bore should be
viscosity of an ISO grade oil can be determined at measured to be absolutely sure that both meet
the bearing operating temperature. The frequency specification and to eliminate the chance of
of oil change depends upon the operating creating excessive operating preload.
conditions and the quality of the lubricant. Mineral
oils oxidize and should be replaced at three month Stainless steel shafts have a higher coefficient
intervals if operated continuously at 212° F (100° C). of thermal expansion than carbon steel shafts.
Longer intervals are possible at lower operating When bearings are installed on stainless steel
temperatures. Synthetic oils are more resistant to shafts, it may be necessary to reduce the
deterioration from exposure to high temperatures interference fit and/or select a bearing having
and may allow for less frequent replacement. Early greater clearance.
blackening of the oil strongly indicates a poor
lubrication condition and can result from many
sources. Multi-grade oils, and lubricants with
detergents and viscosity improvers, are not
recommended.
5
9. “Bearing Reliability in Centrifugal Pumps” –
The MRC Pump School
Recommended for Course Description
• Service, maintenance, machine repair, and The topics listed below are addressed in a series
plant/facility engineering staff of an industrial of lectures, discussions, and hands-on
plant, OEM facility, institution, public utility, workshops.
or commercial building who use rolling
bearings and related equipment. Pump classification and function
• Managers and technicians at industrial plants • Different styles of pumps
and OEM facilities responsible for rolling • General concepts of pump function
bearing performance and reliability. • Theory and design of centrifugal pumps
• Rotating equipment engineers, reliability (overhung impeller vs. split case)
engineers, millwrights, mechanics, and • Basic information on pump curves, head,
maintenance supervisors. pressure/velocity relationships, specific
speed, best efficiency point (BEP),
All individuals should have direct involvement NPSHR vs. NPSHA, and cavitation
or responsibility for pump maintenance and • Impeller and volute designs
installation. • Origins of radial and axial (thrust) loads
Course Objective Bearing selection and internal dynamics
To provide attendees with a thorough knowledge • Bearing basics
of the design, function, and maintenance • Bearing selections for the radial and thrust
requirements of rolling bearings in a centrifugal positions of a centrifugal pump; including
pump. Additionally, the course describes the API and ANSI specifications
preferred methods for installation, start up, and • Axial clearance vs. preload
run-in of rolling bearings in pumps. Lastly, • Appropriate contact angle and cage style
troubleshooting and solutions for common pump • Fundamentals of lubrication; including
bearing problems are covered. Knowledge of grease vs. oil, relubrication intervals,
these areas allows the attendee to be better lubrication systems, vertical shafts,
prepared to maximize the service life and and compatibility issues
reliability of pumps in their facility. • Behavior of angular contact ball bearings
under application conditions
Course Schedule/Length
Installation, maintenance, and troubleshooting
The course is offered twice during the calendar • Shaft and housing fits
year. The first offering is during the spring of • Hands-on workshop: Preferred methods of
the year (April/May) and is held in Hanover, PA; mounting and dismounting ball bearings
while the second offering is during the autumn • Hands-on workshop: Bearing failure analysis;
of the year (September/October) and is held in including load zone interpretation, static
San Diego, CA. The course is two days in length. vibration (e.g. false brinelling), impact
Successful completion of the course will earn (e.g. brinelling), electrical arcing (e.g. fluting),
the attendee 1.6 CEU’s. misalignment, overloading, insufficient
loading, parasitic loads, contamination,
fretting corrosion, and inadequate/ineffective
lubrication
Please contact our Reliability Maintenance Institute
Toll Free: 1-866-753-7378 or visit us on the web at www.skfusa.com/rmi
for official schedule dates, tuition fees, and cancellation policy.
7
10.
11. 200S and 300S series
single-row deep groove ball bearings (non-filling slot)
S-type bearings are used in the radial position in
nearly every centrifugal pump and are commonly
used in electric motors and magnetic drive
pumps.
• ABEC-1
• ABMA C3 internal radial clearance
• Two-piece riveted steel cage
(no polyamide cages for
petrochemical use)
• 30% full of polyurea grease in a
bearing with double closures
A typical application of a single-row
The API 610 Standard recommends that deep groove ball bearing in the radial
bearings, other than angular contact bearings, position of a centrifugal pump.
have greater than Normal internal radial
clearance. All MRC single-row deep groove ball
bearings, without filling slots, have greater than Hybrid Bearings
Normal internal radial clearance (e.g. C3 MRC 200S and 300S series single-row deep
clearance) as standard. groove ball bearings are also manufactured as
hybrid bearings. These bearings combine SAE
MRC single-row deep groove ball bearings are 52100 steel rings with silicon nitride (ceramic)
assembled with a two-piece, riveted steel cage. rolling elements. They are typically utilized in
API 610 strongly recommends against the use applications where there is ineffective lubrication,
of filling slot bearings. MRC product is API 610 excessive contamination, or stray electrical
compliant. currents. Even under poor lubrication conditions,
metal-to-metal contact between the raceways and
S-type bearings are available with a wide balls is eliminated due to the use of the ceramic
assortment of seals, shields and snap rings. material. Hybrid bearings can achieve a service
life which is three to thirty times longer than the
Sealed and shielded bearings are prepacked standard all-steel bearing under these adverse
with a premium quality polyurea grease suitable conditions. Most of the sizes found on the
for non-continuous operating temperatures as following pages are available as hybrid bearings.
high as 300° F (150° C). For more information, please contact MRC
Bearing Services at 1-800-MRC-7000 and request
MRC Hybrid Ceramic Ball Bearings publication
M880-600.
9
17. 5200C and 5300C series
30º double-row angular contact ball bearings
improvements in the bearings. These small, but
effective, modifications to the bearing’s internal
geometry lead to measurable improvements in
both performance and service life. One benefit of
this fine tuning is that MRC double-row ball
bearings are less sensitive to axial overloading.
Improved precision tolerances
MRC double-row angular contact ball bearings
are manufactured to ABEC-3 (P6) dimensional
and running accuracies. This feature provides
Double-row angular contact ball bearings are smoother and truer operation with less heat
used extensively in ANSI standard centrifugal generation, lower vibration, and more precise
pumps and some older API style pumps. They shaft guidance.
are typically used as the primary thrust bearing;
however, in some rare cases, they have been Improved ball quality
used as the radial bearing of some pumps and The balls used in MRC double-row angular
motors. MRC 5000C bearings are compliant with contact ball bearings are one ISO grade better
ANSI requirements. Double-row bearings with than the balls previously utilized. The more
ball loading grooves (filling slots) are not precise ball diameter improves running accuracy
recommended for pump applications. even at high speeds, while reducing noise and
bearing operating temperature.
Proven Track Record New crown cage
Long service life and reliable performance have MRC double-row angular contact ball bearings
earned MRC angular contact ball bearings an have a newly developed one-piece crown cage
excellent reputation in the pump industry. The of heat-treated pressed steel. The new cage
standard product features which have contributed design will allow for improved ball guidance and
to this exceptional performance include: ABEC-1 better lubricant film formation.
precision tolerances, a 30° contact angle per row,
ABMA C3 internal radial clearance, one-piece heat *While a significant number of the bearings incorporate the
treated pressed steel cages, as well as multiple technical improvements described above, the implementation
sealing options. In addition, the contact angles of the improvements across the entire product range is an
diverge inwardly, which provides greater rigidity ongoing process. Please contact MRC before ordering to
and increased resistance to misalignment. These determine which sizes have been converted.
features have allowed MRC double-row bearings
to accommodate combined axial and radial loads,
high speeds, poor lubrication conditions, and
contaminated environments.
Technical Improvements*
Improved materials
MRC double-row angular contact ball bearings
are manufactured from an extremely high quality
bearing steel with a very low oxygen content and
a minimum number of impurities. The rings are
manufactured from cold rolled blanks, and both
rings are heat treated to provide dimensional
stability up to 300° F (150° C). These advantages
allow the bearings to maintain built-in clearances
over their entire service life.
Typical application of double row
Improved internal geometry
Twenty-first century computer-aided design and bearing in an ANSI process pump.
manufacturing programs have permitted subtle
15
18. MRC Bearing Services 1-800-MRC-7000
5200C series 30º double-row angular contact ball bearings
BORE OUTSIDE WIDTH FILLET 1) BASIC RADIAL LOAD RATING 2) BALLS PER ROW
MRC DIAMETER RADIUS
BEARING DYNAMIC 4) STATIC NUMBER DIAMETER
NUMBER d D B ra C Co
mm mm mm mm N N mm
in in in in lbf lbf in
20 47 20.64 1.0 19000 12000 7.938
5204C 8
.7874 1.8504 .8125 .04 4270 2700 .3125
25 52 20.64 1.0 20800 14000 7.938
5205C 9
.9843 2.0472 .8125 .04 4680 3150 .3125
30 62 23.81 1.0 28600 20400 9.525
5206C 9
1.1811 2.4409 .9375 .04 6430 4590 .3750
35 72 26.99 1.0 37700 27500 11.113
5207C 9
1.3780 2.8346 1.0625 .04 8480 6180 .4375
40 80 30.16 1.0 44900 34000 12.304
5208C 9
1.5748 3.1496 1.1875 .04 10100 7640 .4844
45 85 30.16 1.0 48800 39000 12.304
5209C 10
1.7717 3.3465 1.1875 .04 11000 8770 .4844
50 90 30.16 1.0 48800 39000 12.304
5210C 10
1.9685 3.5433 1.1875 .04 11000 8770 .4844
55 100 33.34 1.5 57200 47500 13.495
5211C 10
2.1654 3.9370 1.3125 .06 12900 10700 .5313
60 110 36.51 1.5 70200 58500 15.083
5212C 10
2.3622 4.3307 1.4375 .06 15800 13200 .5938
65 120 38.10 1.5 80600 73500 15.875
5213C 11
2.5591 4.7244 1.5000 .06 18100 16500 .6250
70 125 39.69 1.5 88400 80000 16.670
5214C 11
2.7559 4.9213 1.5625 .06 19900 18000 .6563
75 130 41.28 1.5 95600 88000 17.463
5215C 11
2.9528 5.1181 1.6250 .06 21500 19800 .6875
80 140 44.45 2.0 106000 95000 19.050
5216C 10
3.1496 5.5118 1.7500 .08 23900 21400 .7500
85 150 49.21 2.0 124000 110000 20.638
5217C 10
3.3465 5.9055 1.9375 .08 27900 24700 .8125
90 160 52.39 2.0 130000 120000 21.433
5218C 10
3.5433 6.2992 2.0625 .08 29300 27000 .8438
95 170 55.56 2.0 159000 146000 23.812
5219C 10
3.7402 6.6929 2.1875 .08 35700 32800 .9375
100 180 60.33 2.0 178000 166000 25.400
5220C 10
3.9370 7.0866 2.3750 .08 40000 37300 1.0000
110 200 69.85 2.0 203000 200000 25.400
5222C 10
4.3307 7.8740 2.7500 .08 45600 45000 1.0000
1) Fillet radius indicates maximum fillet radius on shaft or in housing which bearing corner will clear
2) For thrust rating, multiply C by 0.81 and Co by 1.52
3) Values have been determined through historical application and practice
4) Rating for one million revolutions or 500 hours at 331⁄3 RPM
5) Based on 1800 RPM for 5218C through 5222C
6) Based on an oil viscosity of 16 centistokes (mm2/s) at bearing operating temperature
16
23. 5300UPG series
40º double-row angular contact ball bearings
Upgrading the double-row angular contact
ball bearings in API 610 Standard, 5th Edition
and ANSI-style pumps to duplexed single-row
angular contact ball bearings to meet ANSI +
standards typically meant expensive and
time-consuming modifications.
MRC has taken the features of the industry
leading 7000PJDE single-row angular contact
ball bearing and incorporated them into the
standard double-row angular contact ball
bearing’s dimensional package.
• Machined brass cage
• CB axial internal clearance
• ABEC-3 (P6) tolerances
U = Split inner ring
Each feature of the MRC Pump Bearing directly P = 40O contact angle
addresses the most common operational G = Snap ring (standard)
challenges faced by ANSI-style pumps: high
loads and poor lubrication—which lead to high
bearing operating temperatures—lubricant
degradation, and ultimately premature failure.
The MRC Pump Bearing
40° Contact Angle ABEC-3 (P6) Tolerances
Steeper than the contact angle of the standard A feature found in MRC single-row angular
double-row angular contact ball bearing, contact ball bearings, ABEC 3 (P6) tolerances
the Pump Bearing’s 40° contact angle gives contribute to better control of the bearing’s
the bearing increased thrust capacity. mounted condition and, ultimately, smoother
bearing operation.
Machined Brass Cage
Proven in single-row angular contact ball bearings
to be robust for performance in heavy duty and
poor lubrication conditions. Takes longer to fail
and produces noise on impending failure,
therefore giving operators a longer time to react
for maintenance and effectively reducing
unexpected downtime.
CB Axial Internal Clearance
Building on the success of the reduced end
play in single-row angular contacts, the Pump
Bearing’s new optimized axial clearance pro-
motes load sharing between the two rows of
balls and reduces the possibility of skidding
in the inactive ball set.
21
24. MRC Bearing Services 1-800-MRC-7000
5300UPG series 40º double-row angular contact ball bearings
BORE OUTSIDE WIDTH FILLET 1) BASIC RADIAL LOAD RATING 2) BALLS PER ROW
MRC DIAMETER RADIUS
BEARING DYNAMIC 4) STATIC NUMBER DIAMETER
NUMBER d D B ra C Co
mm mm mm mm N N mm
in in in in lbf lbf in
5308UPG 40 90 36.51 1.5 49400 41500 12.700
11
1.5748 3.5433 1.4375 .06 11110 9330 .5000
5309UPG 45 100 39.69 1.5 61800 52000 14.288
11
1.7717 3.9370 1.5625 .06 13890 11690 .5625
5310UPG 50 110 44.45 2.0 81900 69500 16.669
11
1.9685 4.3307 1.7500 .08 18410 15620 .6563
5311UPG 55 120 49.21 2.0 95600 83000 18.256
11
2.1654 4.7244 1.9375 .08 21490 18660 .7188
5313UPG 65 140 58.74 2.1 138000 122000 22.225
11
2.5591 5.5118 2.3125 .08 31000 27400 .8750
1) Fillet radius indicates maximum fillet radius on shaft or in housing which bearing corner will clear
2) For thrust rating, multiply C by 1.08 and Co by 1.93
3) Values have been determined through historical application and practice
4) Rating for one million revolutions or 500 hours at 331⁄3 RPM
The MRC Pump Bearing’s dimensions are identical to those for The MRC Pump Bearing is equipped with robust machined brass
standard DRACBB’s with comparable bore sizes. cages that perform better in heavy duty applications and marginal
lubrication conditions.
22
25. 3) RECOMMENDED RECOMMENDED
PITCH MIN. REQD. THRUST FOR SPEED RATING
SHAFT DIAMETER (k5) HOUSING DIAMETER (H6)
DIAMETER THRUST LOAD 25000 HRS
mm AT 3600 RPM L10 AT 3600 RPM GREASE OIL MAXIMUM MINIMUM MAXIMUM MINIMUM
in N N mm mm mm mm
lbf lbf RPM RPM in in in in
65.0 122 3028 40.013 40.002 90.022 90.000
5000 6700
2.5591 28 681 1.5753 1.5749 3.5442 3.5433
72.5 193 3788 45.013 45.002 100.022 100.000
4500 6000
2.8543 44 852 1.7722 1.7718 3.9379 3.9370
80.0 334 5020 50.013 50.002 110.022 110.000
4000 5300
3.1496 76 1129 1.9690 1.9686 4.3316 4.3307
87.5 480 5860 55.015 55.002 120.022 120.000
3800 5000
3.4449 108 1318 2.1660 2.1655 4.7253 4.7244
102.5 1004 8458 65.015 65.002 140.025 140.000
3200 4300
4.0354 226 1900 2.5597 2.5592 5.5128 5.5118
During operation, one row of balls in the MRC Pump Bearing supports the primary axial load, while the other row of balls handles thrust
in the opposite direction.
23
26.
27. 7200DU and 7300DU series
29° angular contact ball bearings
The MRC 7000DU series is a medium contact
angle bearing. Similar in design to the MRC
7000PDU series, the lower contact angle
allows for higher speeds, lower thrust load
requirements and greater radial loads.
• ABEC-1
• Heavy-stock, stamped steel cages
• GA preload
• Stocked as universally ground half pairs
Due to the 29° contact angle and smaller balls,
this bearing can run with a relatively low thrust
load. It also runs well with a combination of
moderate thrust and radial load.
The 7000DU series should be considered for
applications where thrust is moderate and the
pump has a history of running hot. Many older
style API pumps were equipped with the 7000DU
bearing-type. When replaced with a 40° angular
contact bearing, these older pumps often run
much hotter.
These bearings are stocked with flush ground
faces (GA preload). When heavier than
recommended shaft interferences are employed,
a bearing with an axial clearance (CB) may be
necessary. Special axial clearances can be
obtained on a Made-To-Order basis.
25