Most Viewed Article - International Journal of Computer- Aided Technologies (IJCAx)
•
0 likes•8 views
The advancement in the mobile devices, wireless and web technologies given rise to the new application that will make the voting process very easy and efficient. The E-voting promises the possibility of convenient, easy and safe way to capture and count the votes in an election[1]. This research project provides the specification and requirements for E-Voting using an Android platform. The e-voting means the voting process in election by using electronic device. The android platform is used to develop an evoting application. At first, an introduction about the system is presented. Sections II and III describe all the concepts (survey, design and implementation) that would be used in this work. Finally, the proposed evoting system will be presented. This technology helps the user to cast the vote without visiting the polling booth. The application follows proper authentication measures in order to avoid fraud voters using the system. Once the voting session is completed the results can be available within a fraction of seconds. All the candidates vote count is encrypted and stored in the database in order to avoid any attacks and disclosure of results by third person other than the administrator. Once the session is completed the admin can decrypt the vote count and publish results and can complete the voting process.
Report
Share
Report
Share
Download to read offline
![ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
Ganaraj K
PG Scholar, Computer Science Department, Bearys Institute of technology and
Engineering Mangalore, Karnataka, India
ABSTRACT
The advancement in the mobile devices, wireless and web technologies given rise to the new
application that will make the voting process very easy and efficient. The E-voting promises
the possibility of convenient, easy and safe way to capture and count the votes in an
election[1]. This research project provides the specification and requirements for E-Voting
using an Android platform. The e-voting means the voting process in election by using
electronic device. The android platform is used to develop an evoting application. At first, an
introduction about the system is presented. Sections II and III describe all the concepts
(survey, design and implementation) that would be used in this work. Finally, the proposed
evoting system will be presented. This technology helps the user to cast the vote without
visiting the polling booth. The application follows proper authentication measures in order to
avoid fraud voters using the system. Once the voting session is completed the results can be
available within a fraction of seconds. All the candidates vote count is encrypted and stored
in the database in order to avoid any attacks and disclosure of results by third person other
than the administrator. Once the session is completed the admin can decrypt the vote count
and publish results and can complete the voting process.
KEYWORDS
Electronic voting, e-mail Network
FULL TEXT: https://aircconline.com/ijcax/V4N2/4217ijcax01.pdf](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
The advancement in the mobile devices, wireless and web technologies given rise to the new application that will make the voting process very easy and efficient. The E-voting promises the possibility of
convenient, easy and safe way to capture and count the votes in an election[1]. This research project provides the specification and requirements for E-Voting using an Android platform. The e-voting means the voting process in election by using electronic device. The android platform is used to develop an evoting application. At first, an introduction about the system is presented. Sections II and III describe all
the concepts (survey, design and implementation) that would be used in this work. Finally, the proposed evoting system will be presented. This technology helps the user to cast the vote without visiting the polling booth. The application follows proper authentication measures in order to avoid fraud voters using the system. Once the voting session is completed the results can be available within a fraction of seconds. All
the candidates vote count is encrypted and stored in the database in order to avoid any attacks and disclosure of results by third person other than the administrator. Once the session is completed the admin can decrypt the vote count and publish results and can complete the voting process.
Ijmit(most cited articles)
This document provides summaries of the most cited articles from the International Journal of Managing Information Technology (IJMIT) for the years 2011, 2010, and 2009. It lists the article titles, authors, volume, issue, page numbers, and DOIs for the top articles of each year based on citations. The journal focuses on e-learning, information security, technology acceptance, image retrieval, knowledge society issues, e-learning materials development, data warehousing, green business transformation, and using RFID technology for business intelligence and anti-shoplifting.
Internet of Things
In this presentation, Siddarth explains the topic of IoT and associated trends. He is interested in developing network modules and programming devices for machine to machine communication.
Cv
hmed Zrigan currently works at the Department of Electrical and Electronics Technology , Higher Institute for Comprehensive professions – Tripoli. Ahmed does research in Control Systems Engineering, Chemical Engineering and Automotive Engineering
IRJET- Digital Voting System
This document discusses the design and development of a digital voting system in India. The system would allow eligible Indian citizens over 18 to vote online without going to a physical polling station. Voters would first need to register through the system administrator and their details would be verified against existing databases. They would then be assigned login credentials to access the voting system. The system would be web-based and use technologies like HTML, CSS, Java, and an Oracle database. It would allow voters to register, view candidates, and cast their vote remotely from any location. The goals of the system are to improve voter participation, avoid delays in registration, and update voter rolls without bribery.
Implementation of Biometric Based Electoral Fraud Desisting System
Implementation of Biometric Based Electoral Fraud Desisting SystemAssociate Professor in VSB Coimbatore
India is one of the countries which has the electronic voting machine for parliamentary and assembly polls. But in every poll election commission is facing so much of troubles and various types of issues through the election. The most familiar issue which is faced by the election commission is, no proper acknowledgement regarding the confirmation of casting the votes, duplication or illegal casting of votes. In this project all these issues has been handled and overcome with the perfect solution. The main advantage of this project is handling of data by using biometric system such as finger print and face recognition (is done by masking technique). This is used to ensure the security to avoid fake and repeating voting. It also enhances the accuracy and speed of the process. The system performs with perfect recognition on a face and thumb impression of all the eligible voters in a constituency, which is done as pre-polled procedure. During election, thumb impression and face templates of voters is given as an input to the system. This is then compared with the already stored database and available records. If the particular pattern matches with the record then the voters are allowed to vote but incase if it doesn’t match or in case of repetition, voters vote are denied or gets rejected. The result is instant and counting is done.IRJET- Online Voting System using Fingerprint Scanner
This document describes a proposed online voting system that uses fingerprint scanning for voter authentication and identification. The system was developed using Arduino, PHP, HTML, and CSS. It allows voters to register and cast their votes online through a web interface. When voting, the system scans a voter's fingerprint and only allows a vote if the fingerprint matches one registered in the system database. This is meant to ensure each voter only votes once and prevents fake or invalid votes. The document outlines the objectives, components, workflow, advantages and applications of the proposed online voting system using fingerprint scanning for secure online elections.
24seven
The document proposes a system administration software that allows users to access and control their computer system remotely using email. The software aims to bridge the gap between mobile users and their systems by giving users the ability to read and write files, execute programs, and logoff, restart, or shutdown their computer from anywhere via their mobile device. The project objectives are to enable remote system access and data retrieval for mobile users through a wireless application protocol that is designed for resource-constrained mobile devices.
Recommended
ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
The advancement in the mobile devices, wireless and web technologies given rise to the new application that will make the voting process very easy and efficient. The E-voting promises the possibility of
convenient, easy and safe way to capture and count the votes in an election[1]. This research project provides the specification and requirements for E-Voting using an Android platform. The e-voting means the voting process in election by using electronic device. The android platform is used to develop an evoting application. At first, an introduction about the system is presented. Sections II and III describe all
the concepts (survey, design and implementation) that would be used in this work. Finally, the proposed evoting system will be presented. This technology helps the user to cast the vote without visiting the polling booth. The application follows proper authentication measures in order to avoid fraud voters using the system. Once the voting session is completed the results can be available within a fraction of seconds. All
the candidates vote count is encrypted and stored in the database in order to avoid any attacks and disclosure of results by third person other than the administrator. Once the session is completed the admin can decrypt the vote count and publish results and can complete the voting process.
Ijmit(most cited articles)
This document provides summaries of the most cited articles from the International Journal of Managing Information Technology (IJMIT) for the years 2011, 2010, and 2009. It lists the article titles, authors, volume, issue, page numbers, and DOIs for the top articles of each year based on citations. The journal focuses on e-learning, information security, technology acceptance, image retrieval, knowledge society issues, e-learning materials development, data warehousing, green business transformation, and using RFID technology for business intelligence and anti-shoplifting.
Internet of Things
In this presentation, Siddarth explains the topic of IoT and associated trends. He is interested in developing network modules and programming devices for machine to machine communication.
Cv
hmed Zrigan currently works at the Department of Electrical and Electronics Technology , Higher Institute for Comprehensive professions – Tripoli. Ahmed does research in Control Systems Engineering, Chemical Engineering and Automotive Engineering
IRJET- Digital Voting System
This document discusses the design and development of a digital voting system in India. The system would allow eligible Indian citizens over 18 to vote online without going to a physical polling station. Voters would first need to register through the system administrator and their details would be verified against existing databases. They would then be assigned login credentials to access the voting system. The system would be web-based and use technologies like HTML, CSS, Java, and an Oracle database. It would allow voters to register, view candidates, and cast their vote remotely from any location. The goals of the system are to improve voter participation, avoid delays in registration, and update voter rolls without bribery.
Implementation of Biometric Based Electoral Fraud Desisting System
Implementation of Biometric Based Electoral Fraud Desisting SystemAssociate Professor in VSB Coimbatore
India is one of the countries which has the electronic voting machine for parliamentary and assembly polls. But in every poll election commission is facing so much of troubles and various types of issues through the election. The most familiar issue which is faced by the election commission is, no proper acknowledgement regarding the confirmation of casting the votes, duplication or illegal casting of votes. In this project all these issues has been handled and overcome with the perfect solution. The main advantage of this project is handling of data by using biometric system such as finger print and face recognition (is done by masking technique). This is used to ensure the security to avoid fake and repeating voting. It also enhances the accuracy and speed of the process. The system performs with perfect recognition on a face and thumb impression of all the eligible voters in a constituency, which is done as pre-polled procedure. During election, thumb impression and face templates of voters is given as an input to the system. This is then compared with the already stored database and available records. If the particular pattern matches with the record then the voters are allowed to vote but incase if it doesn’t match or in case of repetition, voters vote are denied or gets rejected. The result is instant and counting is done.IRJET- Online Voting System using Fingerprint Scanner
This document describes a proposed online voting system that uses fingerprint scanning for voter authentication and identification. The system was developed using Arduino, PHP, HTML, and CSS. It allows voters to register and cast their votes online through a web interface. When voting, the system scans a voter's fingerprint and only allows a vote if the fingerprint matches one registered in the system database. This is meant to ensure each voter only votes once and prevents fake or invalid votes. The document outlines the objectives, components, workflow, advantages and applications of the proposed online voting system using fingerprint scanning for secure online elections.
24seven
The document proposes a system administration software that allows users to access and control their computer system remotely using email. The software aims to bridge the gap between mobile users and their systems by giving users the ability to read and write files, execute programs, and logoff, restart, or shutdown their computer from anywhere via their mobile device. The project objectives are to enable remote system access and data retrieval for mobile users through a wireless application protocol that is designed for resource-constrained mobile devices.
Embedded Based Electronic Voting Machine Using Password
The Electronic voting machine plays a key role in elections. The Earlier EVM’S needs more man power, time and mislead the voting scenario due to influence of local people vote and after voting the other may vote only after the Password is set then the system gets ready to accept the polling. After completion of the polling we may make the system to reset .If the person is authenticated then the vote is issued and the polling process is done using buzzer system, else that denies the process. At every regular intervals of time the polled votes are recorded and give the count that how many votes are casted through LCD. This system gives an efficient way to conduct elections and display the results on the same day.
International Journal of Network Security & Its Applications (IJNSA) - Curren...
The International Journal of Network Security & Its Applications (IJNSA) is a bi monthly open access peer-reviewed journal that publishes articles which contribute new results in all areas of the computer Network Security & its applications. The journal focuses on all technical and practical aspects of security and its applications for wired and wireless networks. The goal of this journal is to bring together researchers and practitioners from academia and industry to focus on understanding Modern security threats and countermeasures, and establishing new collaborations in these areas.
DasGreenPerezMurphy_Paper
This document describes a study that aims to identify user activities from accelerometer data collected on Android smartphones without user consent. The researchers were able to classify activities like walking, running, jumping with up to 93% accuracy using signal processing techniques on the accelerometer data like preprocessing, noise reduction, linearization and smoothing. Feature extraction was then performed on windows of data before classification using algorithms like k-Nearest Neighbor and Naive Bayes. Additional activities like climbing/descending stairs were also detected with reasonable success allowing for customized gesture detection. The study shows sensitive user information can be obtained from smartphone sensors without permission.
Captiosus Voting System
Traditionally, in paper based election,voters cast their vote to select right candidate, where they simply put their vote in voting box and at the end of the voting day the votes are going to be count manually. This process was much time consuming as well as was erroneous. To overcome this drawback Electronic Voting Machine (EVM) was introduced. In EVM, Voter cast their vote by pressing the voting button which was on EVM. The Major advantage of EVM system is , the votes are counted automatically instead of manually. But the drawback of EVM machine was, the votes may get manipulated and was not secure. So to overcome all these drawbacks, research on biometric based voting system is going on. This Paper focuses on survey of different voting system using Fingerprint biometric through different algorithms and methods.
IRJET- Advanced Technology in Secured Online Voting System
The document proposes an online voting system for India to replace the current manual paper ballot system. It discusses problems with the existing system such as it being time-consuming, prone to errors, and lacking transparency. The proposed system would allow voters to cast votes online using resources like personal computers or systems arranged by the government. It would speed up the voting process and reduce risks of corruption. The system is designed with voter and administrator modules. The voter module enables login, viewing candidates, and casting a secure vote. The administrator module manages voter and candidate registration, vote counting, and announcing results. The goal is to facilitate voting and draw the process into the digital era.
Internet of Things
In this presentation, Nikhil introduces the concept of IoT and discusses trends. Nikhil's interest area lies in making IoT class devices secure.
Poster fyp
The document proposes a room monitoring system using IoT that consists of sensors installed in different room locations to monitor movements and appliance activities. The system includes a server controller to collect data from the sensors. Administrators can monitor the system controller and manage collected data, while students and staff can view the system data. The project aims to analyze current monitoring problems, design a proposed solution, and develop the room monitoring system using IoT and cloud technologies to send data notifications.
Report: A Model For Remote Parental Control System Using Smartphones
The document summarizes a research paper that proposes a model called "RePort" for remotely monitoring children and teens' access and online activities via their computers and smartphones. The 4-layer RePort model includes layers to monitor smartphone usage through call logs, SMS, GPS, WiFi, and Bluetooth; desktop computer usage; social networking activities; and generate reports. It was implemented as an Android app and Windows service to track parameters like time spent, posts, and messages. Experiments validated the model's ability to monitor access behaviors remotely with 93.46% accuracy.
IRJET- Deployment of Nanosat at Low Altitude for Atmospheric Parameter Analysis
This document proposes a real-time face recognition-based electronic voting machine using Python GUI. The system uses a Raspberry Pi connected to a camera to take pictures of voters' faces and identify valid voters through face recognition. If recognized as valid, the voter can then submit their vote, which is stored in a text file. At the end of polling, an authorized officer can access the vote data with an OTP for counting. The system aims to provide a secure, accurate, and accessible electronic voting option for developing countries without widespread RFID use. It stores votes locally rather than transmitting data, and uses biometrics-based voter identification instead of RFID cards.
IRJET- Aadhar Card based Online Voting System
This document proposes an Aadhar card-based online voting system that uses fingerprint biometrics for voter authentication. The system architecture involves voters entering their Aadhar number, checking their age and eligibility to vote, providing their fingerprint which is matched against the Aadhar database, and if matched the voter can cast their vote online. The system aims to provide more secure online voting by authenticating each voter through their unique Aadhar number and fingerprint, preventing issues like fake or duplicate voting. It could potentially help reduce problems with the current in-person voting system like proxy voting or booth capturing. The proposed system architecture and fingerprint matching module are described, and advantages of increased security and ease of online voting from anywhere are discussed.
Iot security
This document discusses IoT vulnerabilities and mitigations. It begins with an introduction to IoT and examples of vulnerable IoT devices like thermostats, watches, cars, and pacemakers. It then lists elements to consider like devices, cloud interfaces, and networks. Ten common IoT vulnerabilities are outlined such as insecure web interfaces, insufficient authentication, lack of encryption, and insecure software. The document provides information on IoT security issues and considerations for improving security.
IRJET- Safe and Secure Smart Electronic Voting Machine using Biometric
This document proposes a secure electronic voting machine that uses both biometric fingerprint recognition and face recognition for authentication. Voters first provide their fingerprint which is matched against stored fingerprints. Additionally, their face is photographed and matched against stored images to prevent fraudulent duplicate voting using fake fingerprints. The system is designed to provide easy, secure elections using an Arduino board connected to a fingerprint sensor, webcam, LCD display and other hardware. It authenticates each voter's identity by matching both their fingerprint and face to stored records, allowing only eligible voters to cast one vote each and preventing multiple votes from the same person.
International Journal of Network Security & Its Applications (IJNSA) - Curren...
The International Journal of Network Security & Its Applications (IJNSA) is a bi monthly open access peer-reviewed journal that publishes articles which contribute new results in all areas of the computer Network Security & its applications. The journal focuses on all technical and practical aspects of security and its applications for wired and wireless networks. The goal of this journal is to bring together researchers and practitioners from academia and industry to focus on understanding Modern security threats and countermeasures, and establishing new collaborations in these areas.
3G Self Optimization Tool
This document describes a graduation project to develop a 3G Self Optimization Tool (SOT) to automate the optimization of 3G networks. The tool analyzes network cell data and statistics to detect problematic cells, sort them, and recommend solutions. It has four modules: 1) detect issues and view recommendations, 2) address accessibility problems, 3) address retainability problems, and 4) update neighbor cell lists. The tool aims to optimize networks by quickly finding solutions from analysis of performance data. It provides value by enhancing network performance and reducing operator expenses through faster problem resolution.
Sustainable development through IoT
In this presentation, Srijan talks about trends in the field of Internet of Things and feels that "Smart farming" and "Smart cities" might be the where the innovation will happen in this space.
Automation
Automation involves using technology to monitor and control production and delivery of products and services. It is important because it has enabled innovations like cell phones, computers, and appliances that we rely on daily. The latest trends in automation include the Internet of Things, Big Data, and Cloud Computing. Cloud Computing, which stores information and computing power remotely rather than on the user's device, will likely have the biggest impact on automation in the next five years.
IRJET- Biometric Vehicle Starter and Security
This document proposes a biometric vehicle security system using fingerprint recognition to prevent unauthorized access. The system would store fingerprint data during enrollment and only start the vehicle if the detected fingerprint matches the stored data. Additional security features include a keypad for backup access, automatic engine shutdown if idle too long, disconnecting the spark plug for remote locking, and a buzzer alert triggered by ultrasonic height detection. The system aims to provide affordable, user-friendly vehicle protection using fingerprint biometrics which are inexpensive, easy to maintain and difficult to duplicate compared to other biometric methods.
ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
This document summarizes a research paper on developing an advanced e-voting application using the Android platform. It describes the key components of the proposed system including user registration, login, vote casting and encryption. The system aims to allow voters to securely cast their votes from anywhere using their smartphones. It also discusses the security measures used such as encrypting votes and sending login passwords via email to authenticate users. The paper concludes that the proposed system could make the voting process more convenient and efficient compared to traditional methods.
ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
The advancement in the mobile devices, wireless and web technologies given rise to the new application
that will make the voting process very easy and efficient. The E-voting promises the possibility of
convenient, easy and safe way to capture and count the votes in an election[1]. This research project
provides the specification and requirements for E-Voting using an Android platform. The e-voting means
the voting process in election by using electronic device. The android platform is used to develop an evoting application. At first, an introduction about the system is presented. Sections II and III describe all
the concepts (survey, design and implementation) that would be used in this work. Finally, the proposed evoting system will be presented. This technology helps the user to cast the vote without visiting the polling
booth. The application follows proper authentication measures in order to avoid fraud voters using the
system. Once the voting session is completed the results can be available within a fraction of seconds. All
the candidates vote count is encrypted and stored in the database in order to avoid any attacks and
disclosure of results by third person other than the administrator. Once the session is completed the admin
can decrypt the vote count and publish results and can complete the voting process.
ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
This document summarizes a research paper on developing an advanced e-voting application using the Android platform. It describes the key components of the proposed system including user registration, login, vote casting and encryption. The system aims to allow voters to securely cast their votes from anywhere using their smartphones. It outlines the registration process, login authentication, and encryption of votes to ensure security. Finally, it provides an overview of the system design and workflow, highlighting the benefits of the e-voting application in making the voting process more convenient and efficient.
ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
The advancement in the mobile devices, wireless and web technologies given rise to the new application
that will make the voting process very easy and efficient. The E-voting promises the possibility of
convenient, easy and safe way to capture and count the votes in an election[1]. This research project
provides the specification and requirements for E-Voting using an Android platform. The e-voting means
the voting process in election by using electronic device. The android platform is used to develop an evoting application. At first, an introduction about the system is presented. Sections II and III describe all
the concepts (survey, design and implementation) that would be used in this work. Finally, the proposed evoting system will be presented. This technology helps the user to cast the vote without visiting the polling
booth. The application follows proper authentication measures in order to avoid fraud voters using the
system. Once the voting session is completed the results can be available within a fraction of seconds. All
the candidates vote count is encrypted and stored in the database in order to avoid any attacks and
disclosure of results by third person other than the administrator. Once the session is completed the admin
can decrypt the vote count and publish results and can complete the voting process.
ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
The advancement in the mobile devices, wireless and web technologies given rise to the new application
that will make the voting process very easy and efficient. The E-voting promises the possibility of
convenient, easy and safe way to capture and count the votes in an election[1]. This research project
provides the specification and requirements for E-Voting using an Android platform. The e-voting means
the voting process in election by using electronic device. The android platform is used to develop an evoting application. At first, an introduction about the system is presented. Sections II and III describe all
the concepts (survey, design and implementation) that would be used in this work. Finally, the proposed evoting system will be presented. This technology helps the user to cast the vote without visiting the polling
booth. The application follows proper authentication measures in order to avoid fraud voters using the
system. Once the voting session is completed the results can be available within a fraction of seconds. All
the candidates vote count is encrypted and stored in the database in order to avoid any attacks and
disclosure of results by third person other than the administrator. Once the session is completed the admin
can decrypt the vote count and publish results and can complete the voting process.
More Related Content
What's hot
Embedded Based Electronic Voting Machine Using Password
The Electronic voting machine plays a key role in elections. The Earlier EVM’S needs more man power, time and mislead the voting scenario due to influence of local people vote and after voting the other may vote only after the Password is set then the system gets ready to accept the polling. After completion of the polling we may make the system to reset .If the person is authenticated then the vote is issued and the polling process is done using buzzer system, else that denies the process. At every regular intervals of time the polled votes are recorded and give the count that how many votes are casted through LCD. This system gives an efficient way to conduct elections and display the results on the same day.
International Journal of Network Security & Its Applications (IJNSA) - Curren...
The International Journal of Network Security & Its Applications (IJNSA) is a bi monthly open access peer-reviewed journal that publishes articles which contribute new results in all areas of the computer Network Security & its applications. The journal focuses on all technical and practical aspects of security and its applications for wired and wireless networks. The goal of this journal is to bring together researchers and practitioners from academia and industry to focus on understanding Modern security threats and countermeasures, and establishing new collaborations in these areas.
DasGreenPerezMurphy_Paper
This document describes a study that aims to identify user activities from accelerometer data collected on Android smartphones without user consent. The researchers were able to classify activities like walking, running, jumping with up to 93% accuracy using signal processing techniques on the accelerometer data like preprocessing, noise reduction, linearization and smoothing. Feature extraction was then performed on windows of data before classification using algorithms like k-Nearest Neighbor and Naive Bayes. Additional activities like climbing/descending stairs were also detected with reasonable success allowing for customized gesture detection. The study shows sensitive user information can be obtained from smartphone sensors without permission.
Captiosus Voting System
Traditionally, in paper based election,voters cast their vote to select right candidate, where they simply put their vote in voting box and at the end of the voting day the votes are going to be count manually. This process was much time consuming as well as was erroneous. To overcome this drawback Electronic Voting Machine (EVM) was introduced. In EVM, Voter cast their vote by pressing the voting button which was on EVM. The Major advantage of EVM system is , the votes are counted automatically instead of manually. But the drawback of EVM machine was, the votes may get manipulated and was not secure. So to overcome all these drawbacks, research on biometric based voting system is going on. This Paper focuses on survey of different voting system using Fingerprint biometric through different algorithms and methods.
IRJET- Advanced Technology in Secured Online Voting System
The document proposes an online voting system for India to replace the current manual paper ballot system. It discusses problems with the existing system such as it being time-consuming, prone to errors, and lacking transparency. The proposed system would allow voters to cast votes online using resources like personal computers or systems arranged by the government. It would speed up the voting process and reduce risks of corruption. The system is designed with voter and administrator modules. The voter module enables login, viewing candidates, and casting a secure vote. The administrator module manages voter and candidate registration, vote counting, and announcing results. The goal is to facilitate voting and draw the process into the digital era.
Internet of Things
In this presentation, Nikhil introduces the concept of IoT and discusses trends. Nikhil's interest area lies in making IoT class devices secure.
Poster fyp
The document proposes a room monitoring system using IoT that consists of sensors installed in different room locations to monitor movements and appliance activities. The system includes a server controller to collect data from the sensors. Administrators can monitor the system controller and manage collected data, while students and staff can view the system data. The project aims to analyze current monitoring problems, design a proposed solution, and develop the room monitoring system using IoT and cloud technologies to send data notifications.
Report: A Model For Remote Parental Control System Using Smartphones
The document summarizes a research paper that proposes a model called "RePort" for remotely monitoring children and teens' access and online activities via their computers and smartphones. The 4-layer RePort model includes layers to monitor smartphone usage through call logs, SMS, GPS, WiFi, and Bluetooth; desktop computer usage; social networking activities; and generate reports. It was implemented as an Android app and Windows service to track parameters like time spent, posts, and messages. Experiments validated the model's ability to monitor access behaviors remotely with 93.46% accuracy.
IRJET- Deployment of Nanosat at Low Altitude for Atmospheric Parameter Analysis
This document proposes a real-time face recognition-based electronic voting machine using Python GUI. The system uses a Raspberry Pi connected to a camera to take pictures of voters' faces and identify valid voters through face recognition. If recognized as valid, the voter can then submit their vote, which is stored in a text file. At the end of polling, an authorized officer can access the vote data with an OTP for counting. The system aims to provide a secure, accurate, and accessible electronic voting option for developing countries without widespread RFID use. It stores votes locally rather than transmitting data, and uses biometrics-based voter identification instead of RFID cards.
IRJET- Aadhar Card based Online Voting System
This document proposes an Aadhar card-based online voting system that uses fingerprint biometrics for voter authentication. The system architecture involves voters entering their Aadhar number, checking their age and eligibility to vote, providing their fingerprint which is matched against the Aadhar database, and if matched the voter can cast their vote online. The system aims to provide more secure online voting by authenticating each voter through their unique Aadhar number and fingerprint, preventing issues like fake or duplicate voting. It could potentially help reduce problems with the current in-person voting system like proxy voting or booth capturing. The proposed system architecture and fingerprint matching module are described, and advantages of increased security and ease of online voting from anywhere are discussed.
Iot security
This document discusses IoT vulnerabilities and mitigations. It begins with an introduction to IoT and examples of vulnerable IoT devices like thermostats, watches, cars, and pacemakers. It then lists elements to consider like devices, cloud interfaces, and networks. Ten common IoT vulnerabilities are outlined such as insecure web interfaces, insufficient authentication, lack of encryption, and insecure software. The document provides information on IoT security issues and considerations for improving security.
IRJET- Safe and Secure Smart Electronic Voting Machine using Biometric
This document proposes a secure electronic voting machine that uses both biometric fingerprint recognition and face recognition for authentication. Voters first provide their fingerprint which is matched against stored fingerprints. Additionally, their face is photographed and matched against stored images to prevent fraudulent duplicate voting using fake fingerprints. The system is designed to provide easy, secure elections using an Arduino board connected to a fingerprint sensor, webcam, LCD display and other hardware. It authenticates each voter's identity by matching both their fingerprint and face to stored records, allowing only eligible voters to cast one vote each and preventing multiple votes from the same person.
International Journal of Network Security & Its Applications (IJNSA) - Curren...
The International Journal of Network Security & Its Applications (IJNSA) is a bi monthly open access peer-reviewed journal that publishes articles which contribute new results in all areas of the computer Network Security & its applications. The journal focuses on all technical and practical aspects of security and its applications for wired and wireless networks. The goal of this journal is to bring together researchers and practitioners from academia and industry to focus on understanding Modern security threats and countermeasures, and establishing new collaborations in these areas.
3G Self Optimization Tool
This document describes a graduation project to develop a 3G Self Optimization Tool (SOT) to automate the optimization of 3G networks. The tool analyzes network cell data and statistics to detect problematic cells, sort them, and recommend solutions. It has four modules: 1) detect issues and view recommendations, 2) address accessibility problems, 3) address retainability problems, and 4) update neighbor cell lists. The tool aims to optimize networks by quickly finding solutions from analysis of performance data. It provides value by enhancing network performance and reducing operator expenses through faster problem resolution.
Sustainable development through IoT
In this presentation, Srijan talks about trends in the field of Internet of Things and feels that "Smart farming" and "Smart cities" might be the where the innovation will happen in this space.
Automation
Automation involves using technology to monitor and control production and delivery of products and services. It is important because it has enabled innovations like cell phones, computers, and appliances that we rely on daily. The latest trends in automation include the Internet of Things, Big Data, and Cloud Computing. Cloud Computing, which stores information and computing power remotely rather than on the user's device, will likely have the biggest impact on automation in the next five years.
IRJET- Biometric Vehicle Starter and Security
This document proposes a biometric vehicle security system using fingerprint recognition to prevent unauthorized access. The system would store fingerprint data during enrollment and only start the vehicle if the detected fingerprint matches the stored data. Additional security features include a keypad for backup access, automatic engine shutdown if idle too long, disconnecting the spark plug for remote locking, and a buzzer alert triggered by ultrasonic height detection. The system aims to provide affordable, user-friendly vehicle protection using fingerprint biometrics which are inexpensive, easy to maintain and difficult to duplicate compared to other biometric methods.
What's hot (17)
Embedded Based Electronic Voting Machine Using Password
Embedded Based Electronic Voting Machine Using Password
International Journal of Network Security & Its Applications (IJNSA) - Curren...
International Journal of Network Security & Its Applications (IJNSA) - Curren...
IRJET- Advanced Technology in Secured Online Voting System
IRJET- Advanced Technology in Secured Online Voting System
Report: A Model For Remote Parental Control System Using Smartphones
Report: A Model For Remote Parental Control System Using Smartphones
IRJET- Deployment of Nanosat at Low Altitude for Atmospheric Parameter Analysis
IRJET- Deployment of Nanosat at Low Altitude for Atmospheric Parameter Analysis
IRJET- Safe and Secure Smart Electronic Voting Machine using Biometric
IRJET- Safe and Secure Smart Electronic Voting Machine using Biometric
International Journal of Network Security & Its Applications (IJNSA) - Curren...
International Journal of Network Security & Its Applications (IJNSA) - Curren...
Similar to Most Viewed Article - International Journal of Computer- Aided Technologies (IJCAx)
ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
This document summarizes a research paper on developing an advanced e-voting application using the Android platform. It describes the key components of the proposed system including user registration, login, vote casting and encryption. The system aims to allow voters to securely cast their votes from anywhere using their smartphones. It also discusses the security measures used such as encrypting votes and sending login passwords via email to authenticate users. The paper concludes that the proposed system could make the voting process more convenient and efficient compared to traditional methods.
ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
The advancement in the mobile devices, wireless and web technologies given rise to the new application
that will make the voting process very easy and efficient. The E-voting promises the possibility of
convenient, easy and safe way to capture and count the votes in an election[1]. This research project
provides the specification and requirements for E-Voting using an Android platform. The e-voting means
the voting process in election by using electronic device. The android platform is used to develop an evoting application. At first, an introduction about the system is presented. Sections II and III describe all
the concepts (survey, design and implementation) that would be used in this work. Finally, the proposed evoting system will be presented. This technology helps the user to cast the vote without visiting the polling
booth. The application follows proper authentication measures in order to avoid fraud voters using the
system. Once the voting session is completed the results can be available within a fraction of seconds. All
the candidates vote count is encrypted and stored in the database in order to avoid any attacks and
disclosure of results by third person other than the administrator. Once the session is completed the admin
can decrypt the vote count and publish results and can complete the voting process.
ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
This document summarizes a research paper on developing an advanced e-voting application using the Android platform. It describes the key components of the proposed system including user registration, login, vote casting and encryption. The system aims to allow voters to securely cast their votes from anywhere using their smartphones. It outlines the registration process, login authentication, and encryption of votes to ensure security. Finally, it provides an overview of the system design and workflow, highlighting the benefits of the e-voting application in making the voting process more convenient and efficient.
ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
The advancement in the mobile devices, wireless and web technologies given rise to the new application
that will make the voting process very easy and efficient. The E-voting promises the possibility of
convenient, easy and safe way to capture and count the votes in an election[1]. This research project
provides the specification and requirements for E-Voting using an Android platform. The e-voting means
the voting process in election by using electronic device. The android platform is used to develop an evoting application. At first, an introduction about the system is presented. Sections II and III describe all
the concepts (survey, design and implementation) that would be used in this work. Finally, the proposed evoting system will be presented. This technology helps the user to cast the vote without visiting the polling
booth. The application follows proper authentication measures in order to avoid fraud voters using the
system. Once the voting session is completed the results can be available within a fraction of seconds. All
the candidates vote count is encrypted and stored in the database in order to avoid any attacks and
disclosure of results by third person other than the administrator. Once the session is completed the admin
can decrypt the vote count and publish results and can complete the voting process.
ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
The advancement in the mobile devices, wireless and web technologies given rise to the new application
that will make the voting process very easy and efficient. The E-voting promises the possibility of
convenient, easy and safe way to capture and count the votes in an election[1]. This research project
provides the specification and requirements for E-Voting using an Android platform. The e-voting means
the voting process in election by using electronic device. The android platform is used to develop an evoting application. At first, an introduction about the system is presented. Sections II and III describe all
the concepts (survey, design and implementation) that would be used in this work. Finally, the proposed evoting system will be presented. This technology helps the user to cast the vote without visiting the polling
booth. The application follows proper authentication measures in order to avoid fraud voters using the
system. Once the voting session is completed the results can be available within a fraction of seconds. All
the candidates vote count is encrypted and stored in the database in order to avoid any attacks and
disclosure of results by third person other than the administrator. Once the session is completed the admin
can decrypt the vote count and publish results and can complete the voting process.
Smart Voting System Using Java Servlets
This document describes a proposed smart voting system created using Java servlets. The system aims to provide online voting to eliminate issues with traditional paper-based voting methods. It would allow voters to cast their ballots from anywhere using authentication to verify voter eligibility. The system architecture involves roles for administrators to manage voter profiles and ballots, and for voters to register and vote within their constituencies. If implemented, the smart voting system could improve access, efficiency, and transparency in elections.
Efficacious electronic voting using biometry
This document summarizes a research paper that proposes an electronic voting system using biometrics for voter authentication. The system would use fingerprint matching to verify that each voter is who they say they are before allowing them to cast a vote. Fingerprints would be collected during voter registration and stored in a database. At voting time, the voter's fingerprint would be scanned and matched against the stored fingerprint to authenticate them. If verified, the voter could select their candidate on an electronic voting machine. This aims to prevent fraudulent or duplicate voting while streamlining the voting process. Flow diagrams depict the proposed workflow for voter check-in and casting a ballot. The system is meant to address security and efficiency issues with traditional paper-based voting.
F017513138
The document proposes an online voting system that uses one time passwords (OTPs) for authentication to improve security. It discusses how existing e-voting systems lack strong security measures. The proposed system would register voters with their voter ID, Aadhaar ID and password. When a voter logs in, they receive an OTP on their registered mobile phone that must be entered to cast a vote. This adds an extra layer of security through pseudorandom OTPs that change each time. The system is evaluated through a prototype and results show it can identify over 90% of voters in under a minute, improving security, trust and efficiency over traditional methods.
ONLINE FINGERPRINT VOTING SYSTEM
This document proposes a fingerprint-based online voting system to address issues with India's election process like rigging and fake voting. It involves developing a biometric voting machine prototype that uses fingerprint authentication to verify each voter's identity and ensure one person casts only one vote. The system would link to India's Aadhaar biometric database for automatic voter registration. It aims to make the voting process more secure, accurate and reduce the potential for invalid votes by leveraging fingerprint biometrics and remote online voting capabilities. The proposed system seeks to modernize India's elections and strengthen its democratic process.
SECURED EVM USING BIOMETRIC WITH UNIQUE ID AND IoT
The document proposes a secure electronic voting machine (EVM) system that uses biometrics, Aadhar ID, and IoT. The key aspects are:
1. Voters are authenticated using fingerprint and face recognition for security.
2. Aadhar ID provides a unique identification number for each individual.
3. An IoT system is used to accurately count and transmit votes electronically.
4. The proposed system aims to provide secure voting, automatic vote counting, and secure data handling to address issues with existing EVM systems.
Online Voting System Using Fingerprint sensor and Blockchain
1) The document proposes an online voting system using fingerprint sensors and blockchain to increase security and integrity.
2) It allows users to cast votes remotely via their fingerprint authentication in a secure, anonymous and tamper-proof manner on the blockchain.
3) The system aims to reduce issues with traditional and EVM systems like lack of privacy, coercion and non-compliance by providing a transparent and distributed voting process.
MOST VIEWED ARTICLE (CURRENT ISSUE) IN ACADEMIA - INTERNATIONAL JOURNAL OF MA...
The International Journal of Managing Information Technology (IJMIT) is a quarterly open access peer-reviewed journal that publishes articles that contribute new results in all areas of the strategic application of information technology (IT) in organizations. The journal focuses on innovative ideas and best practices in using IT to advance organizations – for-profit, non-profit, and governmental
A Usable Android Application Implementing Distributed Cryptography for Electi...
This document describes a proposed Android application to assist election authorities in distributed cryptography tasks for electronic voting. It discusses how current electronic voting protocols require authorities to perform complex distributed key generation and vote decryption in a verifiable manner. The application aims to help authorities conduct these tasks for an election with 1,000 voters and 5 authorities, using established cryptographic voting protocols including ElGamal encryption and a verifiable mixnet. It would guide authorities through setup and tallying phases, allowing the process to be robust even if some authorities cannot participate, through the use of threshold cryptography. The goal is to make the complex technical processes usable for non-technical authorities through an intuitive smartphone interface.
Design of biometric electronic voting machine
It has always been an arduous task for the election commission to conduct free and fair polls in our country, the
largest democracy in the world. Crores of rupees have been spent on this to make sure that the elections are riot free. But, now-adays
it has become common for some forces to indulge in rigging which may eventually lead to a result contrary to the actual
verdict given by the people. This paper aims to present a new voting system employing biometrics in order to avoid rigging and to
enhance the accuracy and speed of the process. The system uses thumb impression for voter identification as we know that the
thumb impression of every human being has a unique pattern. Thus it would have an edge over the present day voting systems.
As a pre-poll procedure, a database consisting of the thumb impressions of all the eligible voters in a constituency is created.
During elections, the thumb impression of a voter
is enteredas input to the system. This is then compared with the available records in the database.
If the particular pattern matches with anyone in the available record, access to cast a vote is granted. But in case the pattern
doesn’t match with the records of the database or in case of repetition, access to cast a vote is denied or the vote gets rejected.
All the voting machines are connected in a network, through which data transfer takes place to the main host.
The result is instantaneous and counting is done finally at the main host itself. The overall cost for conducting elections gets
reduced and so does the maintenance cost of the systems.
Highly Secured Online Voting System (OVS) Over Network
Internet voting systems have gained popularity and have been used for government elections and referendums in the United Kingdom, Estonia and Switzerland as well as municipal elections in Canada and party primary elections in the United States. Voting system can involve transmission of ballots and votes via private computer networks or the Internet. Electronic voting technology can speed the counting of ballots and can provide improved accessibility for disabled voters. The aim of this paper is to people who have citizenship of India and whose age is above 18 years and of any sex can give their vote through online without going to any physical polling station. Election Commission Officer (Election Commission Officer who will verify whether registered user and candidates are authentic or not) to participate in online voting. This online voting system is highly secured, and its design is very simple, ease of use and also reliable. The proposed software is developed and tested to work on Ethernet and allows online voting. It also creates and manages voting and an election detail as all the users must login by user name and password and click on his favorable candidates to register vote. This will increase the voting percentage in India. By applying high security it will reduce false votes.
IRJET- IoT based Smart Voting System
This document proposes an IoT-based smart voting system using fingerprint authentication on a mobile application. Key aspects include:
1. The system aims to simplify and streamline the voting process using fingerprint identification on a mobile app instead of unnecessary hardware, reducing steps and increasing throughput.
2. It works by enrolling voter fingerprints into a database using a fingerprint scanner and Arduino. Voters then log into the mobile app where their fingerprint is verified via the scanner.
3. If verified, the app directs them to a candidate list based on their region to cast their vote, and they receive an SMS confirmation. All votes are securely stored in the database.
4. The system aims to reduce human
Implementation security system using motorcycle fingerprint identification an...
This document describes a study that implemented a motorcycle security system using fingerprint recognition and Telegram notifications. The system uses a fingerprint sensor connected to a Wemos D1 mini microcontroller, which is then connected to a relay and buzzer. The microcontroller is also connected to Telegram to send notifications. Testing showed the fingerprint sensor had an average response time error of 0.27 seconds, while Telegram notifications had an average response time error of 1 second. The system provides fingerprint authentication to start a motorcycle and sends notifications to a user's phone via Telegram if an unregistered fingerprint is used.
International Journal of Computational Science, Information Technology and Co...
The International Journal of Computational Science, Information Technology and Control Engineering (IJCSITCE) is an open access peer-reviewed journal that publishes quality articles which make innovative contributions in all areas of Computational Science, Mathematical Modeling, Information Technology, Networks, Computer Science, Control and Automation Engineering. IJCSITCE is an abstracted and indexed journal that focuses on all technical and practical aspects of Scientific Computing, Modeling and Simulation, Information Technology, Computer Science, Networks and Communication Engineering, Control Theory and Automation. The goal of this journal is to bring together researchers and practitioners from academia and industry to focus on advanced techniques in computational science, information technology, computer science, chaos, control theory and automation, and establishing new collaborations in these areas.
Bu25425429
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
Avoiding Phishing Attacks in Online Voting System
This document summarizes an article that proposes a secure online voting system to avoid phishing attacks. It begins by describing different types of attacks against online voting like ransomware, malware, and phishing. It then discusses different types of voting systems, including paper-based, lever machines, electronic, poll-site electronic, remote, and internet voting. The existing systems use asymmetric key cryptography, which is slower and more complex than symmetric key cryptography. The proposed system uses a hybrid cryptosystem combining symmetric and asymmetric encryption for ballots and keys to provide a faster and more secure online voting system. It concludes that the proposed internet voting system could help more people vote while saving time and resources.
Similar to Most Viewed Article - International Journal of Computer- Aided Technologies (IJCAx) (20)
ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM
SECURED EVM USING BIOMETRIC WITH UNIQUE ID AND IoT
SECURED EVM USING BIOMETRIC WITH UNIQUE ID AND IoT
Online Voting System Using Fingerprint sensor and Blockchain
Online Voting System Using Fingerprint sensor and Blockchain
MOST VIEWED ARTICLE (CURRENT ISSUE) IN ACADEMIA - INTERNATIONAL JOURNAL OF MA...
MOST VIEWED ARTICLE (CURRENT ISSUE) IN ACADEMIA - INTERNATIONAL JOURNAL OF MA...
A Usable Android Application Implementing Distributed Cryptography for Electi...
A Usable Android Application Implementing Distributed Cryptography for Electi...
Highly Secured Online Voting System (OVS) Over Network
Highly Secured Online Voting System (OVS) Over Network
Implementation security system using motorcycle fingerprint identification an...
Implementation security system using motorcycle fingerprint identification an...
International Journal of Computational Science, Information Technology and Co...
International Journal of Computational Science, Information Technology and Co...
More from ijcax
NEW ONTOLOGY RETRIEVAL IMAGE METHOD IN 5K COREL IMAGES
This document summarizes a research paper that proposes a new ontology-based method for automatic image retrieval and annotation using 5,000 images from the Corel dataset. The method combines global and regional visual features with contextual relationships defined in an ontology. It creates a new ontology based on WordNet to semantically relate tags and reduce gaps between low-level features and high-level concepts. Experimental results show the proposed method increases annotation accuracy compared to other methods.
THE STUDY OF CUCKOO OPTIMIZATION ALGORITHM FOR PRODUCTION PLANNING PROBLEM
Constrained Nonlinear programming problems are hard problems, and one of the most widely used and
common problems for production planning problem to optimize. In this study, one of the mathematical
models of production planning is survey and the problem solved by cuckoo algorithm. Cuckoo Algorithm is
efficient method to solve continues non linear problem. Moreover, mentioned models of production
planning solved with Genetic algorithm and Lingo software and the results will compared. The Cuckoo
Algorithm is suitable choice for optimization in convergence of solution
COMPARATIVE ANALYSIS OF ROUTING PROTOCOLS IN MOBILE AD HOC NETWORKS
This document compares the performance of five routing protocols (AODV, DSR, DSDV, OLSR, DYMO) in mobile ad hoc networks through simulations. It summarizes each protocol and discusses the simulation setup. The protocols are categorized as reactive, proactive, or hybrid. Key performance metrics like packet delivery ratio, end-to-end delay, and routing load are evaluated under varying pause times using the NS-2 simulator. The analysis seeks to determine the best operational conditions for each protocol in mobile ad hoc networks.
PREDICTING ACADEMIC MAJOR OF STUDENTS USING BAYESIAN NETWORKS TO THE CASE OF ...
In this study, which took place current year in the city of Maragheh in IRAN. Number of high school
students in the fields of study: mathematics, Experimental Sciences, humanities, vocational, business and
science were studied and compared. The purpose of this research is to predict the academic major of high
school students using Bayesian networks. The effective factors have been used in academic major selection
for the first time as an effective indicator of Bayesian networks. Evaluation of Impacts of indicators on
each other, discretization data and processing them was performed by GeNIe. The proper course would be
advised for students to continue their education.
A Multi Criteria Decision Making Based Approach for Semantic Image Annotation
Automatic image annotation has emerged as an important research topic due to its potential application on
both image understanding and web image search. This paper presents a model, which integrates visual
topics and regional contexts to automatic image annotation. Regional contexts model the relationship
between the regions, while visual topics provide the global distribution of topics over an image. Previous
image annotation methods neglected the relationship between the regions in an image, while these regions
are exactly explanation of the image semantics, therefore considering the relationship between them are
helpful to annotate the images. Regional contexts and visual topics are learned by PLSA (Probability
Latent Semantic Analysis) from the training data. The proposed model incorporates these two types of
information by MCDM (Multi Criteria Decision Making) approach based on WSM (Weighted Sum
Method). Experiments conducted on the 5k Corel dataset demonstrate the effectiveness of the proposed
model.
On Fuzzy Soft Multi Set and Its Application in Information Systems
Research on information and communication technologies have been developed rapidly since it can be
applied easily to several areas like computer science, medical science, economics, environments,
engineering, among other. Applications of soft set theory, especially in information systems have been
found paramount importance. Recently, Mukherjee and Das defined some new operations in fuzzy soft
multi set theory and show that the De-Morgan’s type of results hold in fuzzy soft multi set theory with
respect to these newly defined operations. In this paper, we extend their work and study some more basic
properties of their defined operations. Also, we define some basic supporting tools in information system
also application of fuzzy soft multi sets in information system are presented and discussed. Here we define
the notion of fuzzy multi-valued information system in fuzzy soft multi set theory and show that every fuzzy
soft multi set is a fuzzy multi valued information system.
RESEARCH ISSUES IN WEB MINING
Web is a collection of inter-related files on one or more web servers while web mining means extracting
valuable information from web databases. Web mining is one of the data mining domains where data
mining techniques are used for extracting information from the web servers. The web data includes web
pages, web links, objects on the web and web logs. Web mining is used to understand the customer
behaviour, evaluate a particular website based on the information which is stored in web log files. Web
mining is evaluated by using data mining techniques, namely classification, clustering, and association
rules. It has some beneficial areas or applications such as Electronic commerce, E-learning, Egovernment, E-policies, E-democracy, Electronic business, security, crime investigation and digital library.
Retrieving the required web page from the web efficiently and effectively becomes a challenging task
because web is made up of unstructured data, which delivers the large amount of information and increase
the complexity of dealing information from different web service providers. The collection of information
becomes very hard to find, extract, filter or evaluate the relevant information for the users. In this paper,
we have studied the basic concepts of web mining, classification, processes and issues. In addition to this,
this paper also analyzed the web mining research challenges.
SPAM FILTERING SECURITY EVALUATION FRAMEWORK USING SVM, LR AND MILR
The Pattern classification system classifies the pattern into feature space within a boundary. In case
adversarial applications use, for example Spam Filtering, the Network Intrusion Detection System (NIDS),
Biometric Authentication, the pattern classification systems are used. Spam filtering is an adversary
application in which data can be employed by humans to attenuate perspective operations. To appraise the
security issue related Spam Filtering voluminous machine learning systems. We presented a framework for
the experimental evaluation of the classifier security in an adversarial environments, that combines and
constructs on the arms race and security by design, Adversary modelling and Data distribution under
attack. Furthermore, we presented a SVM, LR and MILR classifier for classification to categorize email as
legitimate (ham) or spam emails on the basis of thee text samples.
BLIND AID : TRAVEL AID FOR BLIND
Visually impaired people face many problems in their day to day lives. Among them, outdoor navigation is
one of the major concerns. The existing solutions based on Wireless Sensor Networks(WSN) and Global
Positioning System (GPS) track ZigBee units or RFID (Radio Frequency Identification) tags fixed on the
navigation system. The issues pertaining to these solutions are as follows: (1) It is suitable only when the
visually impaired person is commuting in a familiar environment; (2) The device provides only a one way
communication; (3) Most of these instruments are heavy and sometimes costly. Preferable solution would
be to make a system which is easy to carry and cheap.
The objective of this paper is to break down the technological barriers, and to propose a system by
developing an Android App which would help a visually impaired person while traveling via the public
transport system like Bus. The proposed system uses an inbuilt feature of smart phone such as GPS
location tracker to track the location of the user and Text to Speech converter. The system also integrates
Google Speech to Text converter for capturing the voice input and converts them to text. This system
recommends the requirement of installing a GPS module in buses for real time tracking. With minor
modification, this App can also help older people for independent navigation.
INTELLIGENT AGENT FOR PUBLICATION AND SUBSCRIPTION PATTERN ANALYSIS OF NEWS W...
The rapid growth of Internet has revolutionized online news reporting. Many users tend to use online news
websites to obtain news information. When considering Sri Lanka, there are numerous news websites,
which are subscribed on a daily basis. With the rise in this number of news websites, the Sri Lankan
authorities of media face the issue of lacking a proper methodology or a tool which is capable of tracking
and regulating publications made by different disseminators of news.
This paper proposes a News Agent toolbox which periodically extracts news articles and associated
comments with the aid of a concept called Mapping Rules; to classify them into Personalized Categories
defined in terms of keywords based Category Profiles. The proposed tool also analyzes comments made by
the readers with the aid of simple statistical techniques to discover the most popular news articles and
fluctuations in popularity of news stories.
TRACE LENGTH CALCULATION ON PCBS
The design of silicon chips in every semiconductor industry involves the testing of these chips with other
components on the board. The platform developed acts as power on vehicle for the silicon chips. This
Printed Circuit Board design that serves as a validation platform is foundational to the semiconductor
industry.
The manual/repetitive design activities that accompany the development of this board must be minimized to
achieve high quality, improve design efficiency, and eliminate human-errors. One of the time consuming
tasks in the board design is the Trace Length matching. The paper aims to reduce the length matching time
by automating it using SKILL scripts.
RESEARCH TRENDS İN EDUCATIONAL TECHNOLOGY İN TURKEY: 2010-2018 YEAR THESIS AN...
The purpose of this research is the analysis using meta-analysis of studies in the field of Educational
Technology in Turkey and in the field is to demonstrate how to get to that trend. For this purpose, a total of
263 studies were analyzed including 98 theses and 165 articles published between 2010-2018. Purpose
sampling method was used when selecting publications. In the research, while selecting articles and theses;
Turkey addressed; YOK Tez Tarama Database, Journal of Hacettepe University Faculty of Education,
Educational Sciences : Theory & Practice Journal, Education and Science Journal, Elementary Education
Online Journal, The Turkish Online Journal of Education and The Turkish Online Journal of Educational
Technology used in journals. Publications have been reviewed under 11 criteria. Index, year of
publication, research scope, method, education level, sample, number of samples, data collection methods,
analysis techniques, and research tendency, research topics in Educational Technology Research in Turkey
has revealed. The data is interpreted based on percentage and frequency and the results are shown using
the table.
RESEARCH TRENDS İN EDUCATIONAL TECHNOLOGY İN TURKEY: 2010-2018 YEAR THESIS AN...
The purpose of this research is the analysis using meta-analysis of studies in the field of Educational
Technology in Turkey and in the field is to demonstrate how to get to that trend. For this purpose, a total of
263 studies were analyzed including 98 theses and 165 articles published between 2010-2018. Purpose
sampling method was used when selecting publications. In the research, while selecting articles and theses;
Turkey addressed; YOK Tez Tarama Database, Journal of Hacettepe University Faculty of Education,
Educational Sciences : Theory & Practice Journal, Education and Science Journal, Elementary Education
Online Journal, The Turkish Online Journal of Education and The Turkish Online Journal of Educational
Technology used in journals. Publications have been reviewed under 11 criteria. Index, year of
publication, research scope, method, education level, sample, number of samples, data collection methods,
analysis techniques, and research tendency, research topics in Educational Technology Research in Turkey
has revealed. The data is interpreted based on percentage and frequency and the results are shown using
the table
IMPACT OF APPLYING INTERNATIONAL QUALITY STANDARDS ON MEDICAL EQUIPMENT IN SA...
This document summarizes a study on the impact of applying international quality standards on medical equipment in Saudi Arabia. A questionnaire was distributed to 300 healthcare professionals in public and private hospitals to collect data. The results showed that around 80% of respondents strongly agreed that international standards like ISO have significantly improved safety, testing and calibration of medical devices, use of consistent terminology, and compatibility/interoperability. Adopting global quality standards appears to have reduced risks associated with medical equipment and enhanced patient safety in Saudi Arabia according to the healthcare workers surveyed.
SPAM FILTERING SECURITY EVALUATION FRAMEWORK USING SVM, LR AND MILR
The Pattern classification system classifies the pattern into feature space within a boundary. In case adversarial applications use, for example Spam Filtering, the Network Intrusion Detection System (NIDS), Biometric Authentication, the pattern classification systems are used. Spam filtering is an adversary
application in which data can be employed by humans to attenuate perspective operations. To appraise the
security issue related Spam Filtering voluminous machine learning systems. We presented a framework for the experimental evaluation of the classifier security in an adversarial environments, that combines and constructs on the arms race and security by design, Adversary modelling and Data distribution under
attack. Furthermore, we presented a SVM, LR and MILR classifier for classification to categorize email as legitimate (ham) or spam emails on the basis of thee text samples
Developing Product Configurator Tool Using CADs’ API with the help of Paramet...
Order placingis a crucial phase of lifecycle of a Mass-customizable product and seeks improvement in
Mechanical industry. ‘Product Configurator’ is a good solution to bring in data transparency and speed
up the process. Configuration tools arebeing used on a very small scale,reasons being lack of awareness
and dearer costs of existing tools. In this research work a product configurator is developedfor
Hydraulic Actuator (HA).This method uses Applicable Programing Interface (API) of a CAD tool coupled
with Visual Basics (VB) and MS Excel.Itis a standaloneapplication of VB and its integration into web
portal can be the future scope. The final aim was to reduce time delay at CRM phase,bring more
transparency in the ordering system and to establish a method which, small and medium scale enterprises
canafford. Trails on the tool developed generated Part-Assembly drawings, BOM and JT files in
moments.
DESIGN AND DEVELOPMENT OF CUSTOM CHANGE MANAGEMENT WORKFLOW TEMPLATES AND HAN...
A large no. of automobile companies finding a convinient way to manage design changes with the use of
various PLM techniques. Change in any product is something that should occur on timely basis to match
up with customer requirement and cost reduction. The change made in the vehicle designs directly affects
various concerned agencies. Automobile Vehicle structures contains thousands of parts and if there is any
change is occurring in child parts then it becomes important to track that impacted part, propose a solution
on that part and release a new assembly structure with feasible changes such that all efforts need to be
done for cost reduction.
BLIND AID : TRAVEL AID FOR BLIND
Visually impaired people face many problems in their day to day lives. Among them, outdoor navigation is
one of the major concerns. The existing solutions based on Wireless Sensor Networks(WSN) and Global
Positioning System (GPS) track ZigBee units or RFID (Radio Frequency Identification) tags fixed on the
navigation system. The issues pertaining to these solutions are as follows: (1) It is suitable only when the
visually impaired person is commuting in a familiar environment; (2) The device provides only a one way
communication; (3) Most of these instruments are heavy and sometimes costly. Preferable solution would
be to make a system which is easy to carry and cheap.
The objective of this paper is to break down the technological barriers, and to propose a system by
developing an Android App which would help a visually impaired person while traveling via the public
transport system like Bus. The proposed system uses an inbuilt feature of smart phone such as GPS
location tracker to track the location of the user and Text to Speech converter. The system also integrates
Google Speech to Text converter for capturing the voice input and converts them to text. This system
recommends the requirement of installing a GPS module in buses for real time tracking. With minor
modification, this App can also help older people for independent navigation.
TEACHER’S ATTITUDE TOWARDS UTILISING FUTURE GADGETS IN EDUCATION
Today’s era is an era of modernization and globalization. Everything is happening at a very fast rate
whether it is politics, societal reforms, commercialization, transportation, or educational innovations. In
every few second, technology grows either in the form of arrival of the new devices/gadgets with millions of
apps and these latest technological objects may be in the form of hardware/software devices. We are the
educationists, teachers, students and stakeholders of present Indian educational system. These
gadgets/devices are partly being used by us or most of them are still unaware of these innovative
technologies due to the mass media or economical factor. So, there is a need to improvise ourselves
towards utilizing the future gadgets in order to explore the educational uses, barriers and preparatoryneeds of these available devices for educational purposes. This paper aims to study the opinion of the
teacher-educators about the usage of future gadgets in higher education. It will also contribute towards
establishing the list of latest technological devices, and how it can enhances the process of teachinglearning system.
IMPROVING REAL TIME TASK AND HARNESSING ENERGY USING CSBTS IN VIRTUALIZED CLOUD
Cloud computing provides the facility for the business customers to scale up and down their resource usage
based on needs. This is because of the virtualization technology. The scheduling objectives are to improve
the system’s schedule ability for the real-time tasks and to save energy. To achieve the objectives, we
employed the virtualization technique and rolling-horizon optimization with vertical scheduling operation.
The project considers Cluster Scoring Based Task Scheduling (CSBTS) algorithm which aims to decrease
task’s completion time and the policies for VM’s creation, migration and cancellation are to dynamically
adjust the scale of cloud in a while meets the real-time requirements and to save energy
More from ijcax (20)
NEW ONTOLOGY RETRIEVAL IMAGE METHOD IN 5K COREL IMAGES
NEW ONTOLOGY RETRIEVAL IMAGE METHOD IN 5K COREL IMAGES
THE STUDY OF CUCKOO OPTIMIZATION ALGORITHM FOR PRODUCTION PLANNING PROBLEM
THE STUDY OF CUCKOO OPTIMIZATION ALGORITHM FOR PRODUCTION PLANNING PROBLEM
COMPARATIVE ANALYSIS OF ROUTING PROTOCOLS IN MOBILE AD HOC NETWORKS
COMPARATIVE ANALYSIS OF ROUTING PROTOCOLS IN MOBILE AD HOC NETWORKS
PREDICTING ACADEMIC MAJOR OF STUDENTS USING BAYESIAN NETWORKS TO THE CASE OF ...
PREDICTING ACADEMIC MAJOR OF STUDENTS USING BAYESIAN NETWORKS TO THE CASE OF ...
A Multi Criteria Decision Making Based Approach for Semantic Image Annotation
A Multi Criteria Decision Making Based Approach for Semantic Image Annotation
On Fuzzy Soft Multi Set and Its Application in Information Systems
On Fuzzy Soft Multi Set and Its Application in Information Systems
SPAM FILTERING SECURITY EVALUATION FRAMEWORK USING SVM, LR AND MILR
SPAM FILTERING SECURITY EVALUATION FRAMEWORK USING SVM, LR AND MILR
INTELLIGENT AGENT FOR PUBLICATION AND SUBSCRIPTION PATTERN ANALYSIS OF NEWS W...
INTELLIGENT AGENT FOR PUBLICATION AND SUBSCRIPTION PATTERN ANALYSIS OF NEWS W...
RESEARCH TRENDS İN EDUCATIONAL TECHNOLOGY İN TURKEY: 2010-2018 YEAR THESIS AN...
RESEARCH TRENDS İN EDUCATIONAL TECHNOLOGY İN TURKEY: 2010-2018 YEAR THESIS AN...
RESEARCH TRENDS İN EDUCATIONAL TECHNOLOGY İN TURKEY: 2010-2018 YEAR THESIS AN...
RESEARCH TRENDS İN EDUCATIONAL TECHNOLOGY İN TURKEY: 2010-2018 YEAR THESIS AN...
IMPACT OF APPLYING INTERNATIONAL QUALITY STANDARDS ON MEDICAL EQUIPMENT IN SA...
IMPACT OF APPLYING INTERNATIONAL QUALITY STANDARDS ON MEDICAL EQUIPMENT IN SA...
SPAM FILTERING SECURITY EVALUATION FRAMEWORK USING SVM, LR AND MILR
SPAM FILTERING SECURITY EVALUATION FRAMEWORK USING SVM, LR AND MILR
Developing Product Configurator Tool Using CADs’ API with the help of Paramet...
Developing Product Configurator Tool Using CADs’ API with the help of Paramet...
DESIGN AND DEVELOPMENT OF CUSTOM CHANGE MANAGEMENT WORKFLOW TEMPLATES AND HAN...
DESIGN AND DEVELOPMENT OF CUSTOM CHANGE MANAGEMENT WORKFLOW TEMPLATES AND HAN...
TEACHER’S ATTITUDE TOWARDS UTILISING FUTURE GADGETS IN EDUCATION
TEACHER’S ATTITUDE TOWARDS UTILISING FUTURE GADGETS IN EDUCATION
IMPROVING REAL TIME TASK AND HARNESSING ENERGY USING CSBTS IN VIRTUALIZED CLOUD
IMPROVING REAL TIME TASK AND HARNESSING ENERGY USING CSBTS IN VIRTUALIZED CLOUD
Recently uploaded
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
bank management system in java and mysql report1.pdf
truth is high but higher still is truth full living
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
DfMAy 2024 - key insights and contributions
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaModelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Recently uploaded (20)
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
bank management system in java and mysql report1.pdf
bank management system in java and mysql report1.pdf
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
2. Operations Strategy in a Global Environment.ppt
2. Operations Strategy in a Global Environment.ppt
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Most Viewed Article - International Journal of Computer- Aided Technologies (IJCAx)
- 1. Most Viewed Article in Computer Graphics International Journal of Computer- Aided Technologies (IJCAx) http://airccse.org/journal/ijcax/index.html
- 2. ADVANCED E-VOTING APPLICATION USING ANDROID PLATFORM Ganaraj K PG Scholar, Computer Science Department, Bearys Institute of technology and Engineering Mangalore, Karnataka, India ABSTRACT The advancement in the mobile devices, wireless and web technologies given rise to the new application that will make the voting process very easy and efficient. The E-voting promises the possibility of convenient, easy and safe way to capture and count the votes in an election[1]. This research project provides the specification and requirements for E-Voting using an Android platform. The e-voting means the voting process in election by using electronic device. The android platform is used to develop an evoting application. At first, an introduction about the system is presented. Sections II and III describe all the concepts (survey, design and implementation) that would be used in this work. Finally, the proposed evoting system will be presented. This technology helps the user to cast the vote without visiting the polling booth. The application follows proper authentication measures in order to avoid fraud voters using the system. Once the voting session is completed the results can be available within a fraction of seconds. All the candidates vote count is encrypted and stored in the database in order to avoid any attacks and disclosure of results by third person other than the administrator. Once the session is completed the admin can decrypt the vote count and publish results and can complete the voting process. KEYWORDS Electronic voting, e-mail Network FULL TEXT: https://aircconline.com/ijcax/V4N2/4217ijcax01.pdf
- 3. REFERENCES [1] Dr.Aree Ali Mohammed and Ramyar Adbolrahman Timour,Efficient E-voting Android Based System, IJARCSSE,vol.3,Issue 11,2013 [2] A.S. Belenky and R.C. Larson, “To Queue or not to Queue?,” OR/MS 27, October 2013, pp. 30-34. [3] “An Electronic Polling Service to Support Public Awareness Using Web Technologies”, Christos Bouras, Nikolaos Katris, Vassilis Triantafillou. International Journal of Computer- Aided Technologies (IJCAx) Vol.4, No.1/2, April 2017 9 [4] “E-voting on Android System” paper (International Journal of Emerging Technology and Advanced Engineering) prepared by : Kirti Autade, Pallavi Ghadge, Sarika Kale ,Co-authors- Prof. N. J. Kulkarni, Prof. S. S. Mujgond, February 2012. [5] “Electronic Voting,” Encyclopedia of Computers and Computer History, prepared by Lorrie Faith Cranor and edited by Raul Rojas, published by Fitzroy Dearborn, 2001. [6] “Voting – What is, What Could be,” Caltech/MIT Voting Technology Project (VTP) Report, July 2001. [7] Java Cryptography an e-book by Jonathan B. Knudsen, First edition May 1998, ISBN:1- 56592-402-9