HEATED WIND PARTICLE’S BEHAVIOURAL STUDY BY THE CONTINUOUS WAVELET TRANSFORM ...cscpconf
Nowadays Continuous Wavelet Transform (CWT) as well as Fractal analysis is generally used for the Signal and Image processing application purpose. Our current work extends the field of application in case of CWT as well as Fractal analysis by applying it in case of the agitated wind particle’s behavioral study. In this current work in case of the agitated wind particle, we have mathematically showed that the wind particle’s movement exhibits the “Uncorrelated” characteristics during the convectional flow of it. It is also demonstrated here by the Continuous Wavelet Transform (CWT) as well as the Fractal analysis with matlab 7.12 version
Anisotropic Bianchi Type-III Dark Energy Model with Time-Dependent Decelerati...IOSR Journals
An anisotropic Bianchi type-III cosmological model is investigated in a Saez-Ballester scalar-tensor theory of gravitation. Three different time-dependent skewness parameters along spatial directions are introduced to represent the deviation of pressure from isotropy. To get deterministic solutions of the field equations, we choose variation law of scale factor 𝑆= (𝑡𝑟𝑒𝑡)1𝑙 which yields a time-dependent deceleration parameter (DP) representing a model that generates a transition of the universe from the early decelerating phase to the present accelerating phase. Some physical and geometrical properties of the model are also discussed.
HEATED WIND PARTICLE’S BEHAVIOURAL STUDY BY THE CONTINUOUS WAVELET TRANSFORM ...cscpconf
Nowadays Continuous Wavelet Transform (CWT) as well as Fractal analysis is generally used for the Signal and Image processing application purpose. Our current work extends the field of application in case of CWT as well as Fractal analysis by applying it in case of the agitated wind particle’s behavioral study. In this current work in case of the agitated wind particle, we have mathematically showed that the wind particle’s movement exhibits the “Uncorrelated” characteristics during the convectional flow of it. It is also demonstrated here by the Continuous Wavelet Transform (CWT) as well as the Fractal analysis with matlab 7.12 version
Anisotropic Bianchi Type-III Dark Energy Model with Time-Dependent Decelerati...IOSR Journals
An anisotropic Bianchi type-III cosmological model is investigated in a Saez-Ballester scalar-tensor theory of gravitation. Three different time-dependent skewness parameters along spatial directions are introduced to represent the deviation of pressure from isotropy. To get deterministic solutions of the field equations, we choose variation law of scale factor 𝑆= (𝑡𝑟𝑒𝑡)1𝑙 which yields a time-dependent deceleration parameter (DP) representing a model that generates a transition of the universe from the early decelerating phase to the present accelerating phase. Some physical and geometrical properties of the model are also discussed.
ON APPROACH OF OPTIMIZATION OF FORMATION OF INHOMOGENOUS DISTRIBUTIONS OF DOP...ijcsa
We introduce an approach of manufacturing of a field-effect heterotransistor with inhomogenous doping of channel. The inhomogenous distribution of concentration of dopant gives a possibility to change speed of transport of charge carriers and to decrease length of channel.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
α Nearness ant colony system with adaptive strategies for the traveling sales...ijfcstjournal
On account of ant colony algorithm easy to fall into local optimum, this paper presents an improved ant
colony optimization called α-AACS and reports its performance. At first, we provide an concise description
of the original ant colony system(ACS) and introduce α-nearness based on the minimum 1-tree for ACS’s
disadvantage, which better reflects the chances of a given link being a member of an optimal tour. Then, we
improve α-nearness by computing a lower bound and propose other adaptations for ACS. Finally, we
conduct a fair competition between our algorithm and others. The results clearly show that α-AACS has a
better global searching ability in finding the best solutions, which indicates that α-AACS is an effective
approach for solving the traveling salesman problem.
GPR Probing of Smoothly Layered Subsurface Medium: 3D Analytical ModelLeonid Krinitsky
An analytical approach to GPR probing of a
horizontally layered subsurface medium is developed, based on the coupled-wave WKB approximation. An empirical model of current in dipole transmitter antenna is used.
MODIFICATION OF DOPANT CONCENTRATION PROFILE IN A FIELD-EFFECT HETEROTRANSIST...msejjournal
In this paper we consider an approach of manufacturing more compact field-effect heterotransistors. The
approach based on manufacturing a heterostructure, which consist of a substrate and an epitaxial layer
with specific configuration. After that several areas of the epitaxial layer have been doped by diffusion or
ion implantation with optimized annealing of dopant and /or radiation defects. At the same time we introduce
an approach of modification of energy band diagram by additional doping of channel of the transistors.
We also consider an analytical approach to model and optimize technological process.
Optimum range of angle tracking radars: a theoretical computingIJECEIAES
In this paper, we determine an optimal range for angle tracking radars (ATRs) based on evaluating the standard deviation of all kinds of errors in a tracking system. In the past, this optimal range has often been computed by the simulation of the total error components; however, we are going to introduce a closed form for this computation which allows us to obtain the optimal range directly. Thus, for this purpose, we firstly solve an optimization problem to achieve the closed form of the optimal range (Ropt.) and then, we compute it by doing a simple simulation. The results show that both theoretical and simulation-based computations are similar to each other.
On selection of periodic kernels parameters in time series predictioncsandit
In the paper the analysis of the periodic kernels parameters is described. Periodic kernels can
be used for the prediction task, performed as the typical regression problem. On the basis of the
Periodic Kernel Estimator (PerKE) the prediction of real time series is performed. As periodic
kernels require the setting of their parameters it is necessary to analyse their influence on the
prediction quality. This paper describes an easy methodology of finding values of parameters of
periodic kernels. It is based on grid search. Two different error measures are taken into
consideration as the prediction qualities but lead to comparable results. The methodology was
tested on benchmark and real datasets and proved to give satisfactory results.
IJCER (www.ijceronline.com) International Journal of computational Engineerin...ijceronline
Call for paper 2012, hard copy of Certificate, research paper publishing, where to publish research paper,
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJCER, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, research and review articles, IJCER Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathematics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer review journal, indexed journal, research and review articles, engineering journal, www.ijceronline.com, research journals,
yahoo journals, bing journals, International Journal of Computational Engineering Research, Google journals, hard copy of Certificate,
journal of engineering, online Submission
ON APPROACH OF OPTIMIZATION OF FORMATION OF INHOMOGENOUS DISTRIBUTIONS OF DOP...ijcsa
We introduce an approach of manufacturing of a field-effect heterotransistor with inhomogenous doping of channel. The inhomogenous distribution of concentration of dopant gives a possibility to change speed of transport of charge carriers and to decrease length of channel.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
α Nearness ant colony system with adaptive strategies for the traveling sales...ijfcstjournal
On account of ant colony algorithm easy to fall into local optimum, this paper presents an improved ant
colony optimization called α-AACS and reports its performance. At first, we provide an concise description
of the original ant colony system(ACS) and introduce α-nearness based on the minimum 1-tree for ACS’s
disadvantage, which better reflects the chances of a given link being a member of an optimal tour. Then, we
improve α-nearness by computing a lower bound and propose other adaptations for ACS. Finally, we
conduct a fair competition between our algorithm and others. The results clearly show that α-AACS has a
better global searching ability in finding the best solutions, which indicates that α-AACS is an effective
approach for solving the traveling salesman problem.
GPR Probing of Smoothly Layered Subsurface Medium: 3D Analytical ModelLeonid Krinitsky
An analytical approach to GPR probing of a
horizontally layered subsurface medium is developed, based on the coupled-wave WKB approximation. An empirical model of current in dipole transmitter antenna is used.
MODIFICATION OF DOPANT CONCENTRATION PROFILE IN A FIELD-EFFECT HETEROTRANSIST...msejjournal
In this paper we consider an approach of manufacturing more compact field-effect heterotransistors. The
approach based on manufacturing a heterostructure, which consist of a substrate and an epitaxial layer
with specific configuration. After that several areas of the epitaxial layer have been doped by diffusion or
ion implantation with optimized annealing of dopant and /or radiation defects. At the same time we introduce
an approach of modification of energy band diagram by additional doping of channel of the transistors.
We also consider an analytical approach to model and optimize technological process.
Optimum range of angle tracking radars: a theoretical computingIJECEIAES
In this paper, we determine an optimal range for angle tracking radars (ATRs) based on evaluating the standard deviation of all kinds of errors in a tracking system. In the past, this optimal range has often been computed by the simulation of the total error components; however, we are going to introduce a closed form for this computation which allows us to obtain the optimal range directly. Thus, for this purpose, we firstly solve an optimization problem to achieve the closed form of the optimal range (Ropt.) and then, we compute it by doing a simple simulation. The results show that both theoretical and simulation-based computations are similar to each other.
On selection of periodic kernels parameters in time series predictioncsandit
In the paper the analysis of the periodic kernels parameters is described. Periodic kernels can
be used for the prediction task, performed as the typical regression problem. On the basis of the
Periodic Kernel Estimator (PerKE) the prediction of real time series is performed. As periodic
kernels require the setting of their parameters it is necessary to analyse their influence on the
prediction quality. This paper describes an easy methodology of finding values of parameters of
periodic kernels. It is based on grid search. Two different error measures are taken into
consideration as the prediction qualities but lead to comparable results. The methodology was
tested on benchmark and real datasets and proved to give satisfactory results.
IJCER (www.ijceronline.com) International Journal of computational Engineerin...ijceronline
Call for paper 2012, hard copy of Certificate, research paper publishing, where to publish research paper,
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJCER, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, research and review articles, IJCER Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathematics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer review journal, indexed journal, research and review articles, engineering journal, www.ijceronline.com, research journals,
yahoo journals, bing journals, International Journal of Computational Engineering Research, Google journals, hard copy of Certificate,
journal of engineering, online Submission
Comparision of flow analysis through a different geometry of flowmeters using...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Dynamic Economic Dispatch Assessment Using Particle Swarm Optimization TechniquejournalBEEI
This paper presents the application of particle swarm optimization (PSO) technique for solving the dynamic economic dispatch (DED) problem. The DED is one of the main functions in power system planning in order to obtain optimum power system operation and control. It determines the optimal operation of generating units at every predicted load demands over a certain period of time. The optimum operation of generating units is obtained by referring to the minimum total generation cost while the system is operating within its limits. The DED based PSO technique is tested on a 9-bus system containing of three generator bus, six load bus and twelve transmission lines.
Analytic Model of Wind Disturbance Torque on Servo Tracking AntennaIJMER
International Journal of Modern Engineering Research (IJMER) is Peer reviewed, online Journal. It serves as an international archival forum of scholarly research related to engineering and science education.
Finite element method analytical understanding was implemen ted to simulate the 1-dimensional break up model fot a jet spray . Programming was done in MATLAB
Prediction of aerodynamic characteristics for slender bluff bodies with nose ...vasishta bhargava
the numerical approach is used to verify the aero/hydrodynamic performance of different
geometries of nose cones. Computational methods predict the flow characteristics fairly accurately in order to validate
the data obtained from experiments. The simulation involves muzzle velocity that range from 5m/s to 25 m/s i.e. 1.69 to
8.4 x 105
and calculated for the different angle of attack, -10 to 20 degrees, to demonstrate the flow behavior around the
shells. Nosecone is the most forward section of any slender moving bodies which are used in rockets, guided missiles,
submarines, aircraft drop tanks and aircraft fuselage to reduce the aerodynamic or hydrodynamic drag. The basic
geometry of bluff body is cylinder with variant nosecone shapes such as flat and tapered head, with moderate to low
taper ratios and conical head.
Application of DRP scheme solving for rotating disk-driven cavityijceronline
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
Comparative analysis on an exponential form of pulse with an integer and non-...IJERA Editor
The theme of this paper is to make a fundamental comparative analysis on time-bandwidth product of a short
duration pulse, whose amplitude is varied with an exponent as an integer and non-integer. The time-bandwidth
product is the most significant factor in pulse compression techniques which is used very often in radar systems
for better detection of the target and resolving the ambiguities in the both range and velocity with the help of
ambiguity function. In this paper, different exponents have been used and it is observed that the non-integer
exponents are giving slightly better quantitative parameters like time-bandwidth product, relative sidelobe level
and main lobe widths. To improve these quantitative parameters, phase variations have been incorporated with
the differentiated pulses of the original exponential signal. Finally, the modulation has also been applied on the
pulses to observe the results in real practical applications. From all these analysis, it is concluded that the
differentiated non-integer exponential pulse with bi-polar variations is giving better pulse compression
requirements (time-bandwidth product, peak sidelobe level, 3-dB beamwidth and main lobe widths) compared
to all other pulse forms. The outputs of the matched filter are also observed for each pulse shape.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Mathematical Hydraulic Models of One-Dimensional Unsteady Flow in Rivers IJAEMSJORNAL
This flow in rivers is concerned with unsteady flow in open channel and it mathematically governed by the Saint Venant equation, using a four-point implicit finite difference scheme. For a one-dimensional applications, the relevant flow parameters are functions of time, and longitudinal positions. Considering the equations for the conservation of mass (continuity) and conservation of momentum. The mathematical method is empirical with the computer revolution, numerical methods are now effective to develop the hydraulic model. Conventional methods used to compute discharge, such as stage-discharge and stage-fall discharge relationships has been inadequate. Further research is recommended to include tributaries in rivers.
Similar to Modeling and simulation of ducted axial fan for one dimensional flow (20)
Tech transfer making it as a risk free approach in pharmaceutical and biotech iniaemedu
Tech transfer is a common methodology for transferring new products or an existing
commercial product to R&D or to another manufacturing site. Transferring product knowledge to the
manufacturing floor is crucial and it is an ongoing approach in the pharmaceutical and biotech
industry. Without adopting this process, no company can manufacture its niche products, let alone
market them. Technology transfer is a complicated, process because it is highly cross functional. Due
to its cross functional dependence, these projects face numerous risks and failure. If anidea cannot be
successfully brought out in the form of a product, there is no customer benefit, or satisfaction.
Moreover, high emphasis is in sustaining manufacturing with highest quality each and every time. It
is vital that tech transfer projects need to be executed flawlessly. To accomplish this goal, risk
management is crucial and project team needs to use the risk management approach seamlessly.