Millennium MAN Sicas Euroclean
•
0 likes•46 views
The Millennium NA4M6 street suction sweeper features a 4-cylinder diesel engine, hydrostatic transmission, front and rear suspension, and hydraulic steering and brakes. It has a 4.6 cubic meter stainless steel hopper, 700 liter water tank, and can sweep at 15 km/h with a 2.2 or 3.15 meter width using side brushes and an 830mm diameter suction fan. Additional options include air conditioning, high pressure washing, a third brush, and rear view camera.
Report
Share
Report
Share
Download to read offline
Recommended
Sicas Euroclean Industrial Mod. Sa2
The SA2.2V suction street sweeper has a 4-wheel articulated steel chassis powered by a 55 kW 4-cylinder turbocharged diesel engine. It features a 2-seat steel cab, hydrostatic transmission, sprung front axle, rear leaf springs, hydraulic steering, and drum brakes. The sweeping system includes 2 hydraulically operated side brushes and an optional front brush. Suction is provided by a 610 mm steel fan capable of 8,000 cfm, collecting debris into a 2 m3 stainless steel hopper. A water-based dust suppression system keeps the brushes and suction nozzle wet during operation. Standard sweeping width is 2,000 mm at 12 kph, expanding to
Millennium NA4M3 Sweeper Sicas Euroclean
The NA4M3 model suction street sweeper has a 4 cylinder turbocharged diesel engine producing 118.5 kW of power. It has a 4 wheel steel chassis, 2 seat steel cab, and hydrostatic transmission with rear wheel drive and 2 speed options for travel and sweeping. The sweeper uses 2 hydraulic side brushes and an optional front brush with an 824mm diameter suction fan capable of 18,000 cfm/h. The 4.2m3 hopper tips rearward to a height of 1,650mm. Water suppression and a 700L tank help control dust. Standard sweeping width is 2,000mm expanding to 2,800mm with the third brush. Top speed is 41.2
Aprilia RSV4 RR press release
1. The Aprilia RSV4 RR is a high-performance sport bike with a 999.6cc liquid-cooled V4 engine producing 201 horsepower.
2. It has advanced electronics including three engine maps, traction control, wheelie control, and launch control.
3. Additional features include Brembo brakes, adjustable Öhlins suspension, and lightweight aluminum frame and wheels.
Aprilia Tuono V4 1100 Factory - Specs
The Aprilia Tuono V4 1100 Factory has a longitudinal 65-degree V4 engine with 175 horsepower and 121 Nm of torque. It has advanced electronics including multiple ride modes and cornering ABS. The chassis is an aluminum dual beam frame with Öhlins suspension at both ends for precise handling. Braking power comes from Brembo monobloc calipers and radial master cylinder.
IRJET - Design of Semiautomatic Vacuum Elevators
The document describes the design of a semiautomatic vacuum elevator system. It discusses how pneumatic vacuum elevators work using air pressure differences to lift an elevator cab. The system includes components like an air compressor, cylinder, solenoids, suction unit, elevator car, sensors, PLC and power supply. Creo software will be used for designing. Semiautomatic vacuum elevators are more compact than traditional elevators and ideal for residential use due to their small footprint and ability to lift loads up to 360lbs over multiple floors.
Automobile Basics & Advanced System
A documentation of topics covered during an automobile workshop conducted by Autonext at Jamshedpur from Dec 28, 2015 to Jan 10, 2016
Railwaywagonbrakingsystemppt 170115044725
The document discusses different braking systems used in railway vehicles. It presents four main types of braking systems: pneumatic, electrodynamic, mechanical, and electromagnetic. Pneumatic braking systems include vacuum brakes and compressed air brakes. Vacuum brakes work by applying brakes when air pressure is released, while compressed air brakes apply brakes when air pressure is applied. Electrodynamic braking converts kinetic energy to electricity to slow trains. Mechanical brakes use friction between wheels and brakes for stopping power. Electromagnetic braking is particularly useful for high-speed trains as it provides efficient braking.
Halderman ch018 lecture
This document provides an overview of gasoline engine operation, parts, and specifications. It explains how a four-stroke engine operates through intake, compression, power, and exhaust strokes. It also describes how engines are classified based on characteristics like cylinder arrangement and valve configuration. Key engine parts like the block, heads, and rotating assembly are introduced.
Recommended
Sicas Euroclean Industrial Mod. Sa2
The SA2.2V suction street sweeper has a 4-wheel articulated steel chassis powered by a 55 kW 4-cylinder turbocharged diesel engine. It features a 2-seat steel cab, hydrostatic transmission, sprung front axle, rear leaf springs, hydraulic steering, and drum brakes. The sweeping system includes 2 hydraulically operated side brushes and an optional front brush. Suction is provided by a 610 mm steel fan capable of 8,000 cfm, collecting debris into a 2 m3 stainless steel hopper. A water-based dust suppression system keeps the brushes and suction nozzle wet during operation. Standard sweeping width is 2,000 mm at 12 kph, expanding to
Millennium NA4M3 Sweeper Sicas Euroclean
The NA4M3 model suction street sweeper has a 4 cylinder turbocharged diesel engine producing 118.5 kW of power. It has a 4 wheel steel chassis, 2 seat steel cab, and hydrostatic transmission with rear wheel drive and 2 speed options for travel and sweeping. The sweeper uses 2 hydraulic side brushes and an optional front brush with an 824mm diameter suction fan capable of 18,000 cfm/h. The 4.2m3 hopper tips rearward to a height of 1,650mm. Water suppression and a 700L tank help control dust. Standard sweeping width is 2,000mm expanding to 2,800mm with the third brush. Top speed is 41.2
Aprilia RSV4 RR press release
1. The Aprilia RSV4 RR is a high-performance sport bike with a 999.6cc liquid-cooled V4 engine producing 201 horsepower.
2. It has advanced electronics including three engine maps, traction control, wheelie control, and launch control.
3. Additional features include Brembo brakes, adjustable Öhlins suspension, and lightweight aluminum frame and wheels.
Aprilia Tuono V4 1100 Factory - Specs
The Aprilia Tuono V4 1100 Factory has a longitudinal 65-degree V4 engine with 175 horsepower and 121 Nm of torque. It has advanced electronics including multiple ride modes and cornering ABS. The chassis is an aluminum dual beam frame with Öhlins suspension at both ends for precise handling. Braking power comes from Brembo monobloc calipers and radial master cylinder.
IRJET - Design of Semiautomatic Vacuum Elevators
The document describes the design of a semiautomatic vacuum elevator system. It discusses how pneumatic vacuum elevators work using air pressure differences to lift an elevator cab. The system includes components like an air compressor, cylinder, solenoids, suction unit, elevator car, sensors, PLC and power supply. Creo software will be used for designing. Semiautomatic vacuum elevators are more compact than traditional elevators and ideal for residential use due to their small footprint and ability to lift loads up to 360lbs over multiple floors.
Automobile Basics & Advanced System
A documentation of topics covered during an automobile workshop conducted by Autonext at Jamshedpur from Dec 28, 2015 to Jan 10, 2016
Railwaywagonbrakingsystemppt 170115044725
The document discusses different braking systems used in railway vehicles. It presents four main types of braking systems: pneumatic, electrodynamic, mechanical, and electromagnetic. Pneumatic braking systems include vacuum brakes and compressed air brakes. Vacuum brakes work by applying brakes when air pressure is released, while compressed air brakes apply brakes when air pressure is applied. Electrodynamic braking converts kinetic energy to electricity to slow trains. Mechanical brakes use friction between wheels and brakes for stopping power. Electromagnetic braking is particularly useful for high-speed trains as it provides efficient braking.
Halderman ch018 lecture
This document provides an overview of gasoline engine operation, parts, and specifications. It explains how a four-stroke engine operates through intake, compression, power, and exhaust strokes. It also describes how engines are classified based on characteristics like cylinder arrangement and valve configuration. Key engine parts like the block, heads, and rotating assembly are introduced.
F6 - Striving Excellence
BYD Auto's F6 sedan provides elegant design, stunning performance, and value for money. It was awarded best debuted car at the 12th Shanghai Auto Show. The F6 has a Mitsubishi 2.4L engine and tiptronic transmission for powerful performance. It also has luxury interior features like leather seats, navigation, and cruise control. The F6 aims to attract customers seeking both high-end style and spacious comfort at an affordable price.
Air brake-system-using-exhaust-gas power point presentation
The aim is to design and to develop an air brake system based on exhaust gas is called “fabrication of air brake system using engine exhaust gas”. The main aim of this project is to reduce the workloads of the engine drive to operate the air compressor, because here the compressor is not operated by the engine drive.
Here we are placing a turbine in the path of exhaust from the engine. The turbine e is connected to a dynamo by means of coupling, which is used to generate power. Depending upon the airflow the turbine will start rotating, and then the dynamo will also starts to rotate. A dynamo is a device which is used to convert the kinetic energy into electrical energy. The generated power can be stored in the battery and then this electric power has loaded to the D.C compressor. The air compressor compresses the atmospheric air and it stored in the air tank and the air tank has pressure relief valve to control the pressure in the tank . The air tank supplies the compressed pneumatic power to the pneumatic actuator through solenoid valve to apply brake. The pneumatic actuator is a double acting cylinder which converts hydraulic energy into linear moti on.
Air brake-system-using-exhaust-gas-final-report
The aim is to design and to develop an air brake system based on exhaust gas is called “fabrication of air brake system using engine exhaust gas”. The main aim of this project is to reduce the workloads of the engine drive to operate the air compressor, because here the compressor is not operated by the engine drive.
Here we are placing a turbine in the path of exhaust from the engine. The turbine e is connected to a dynamo by means of coupling, which is used to generate power. Depending upon the airflow the turbine will start rotating, and then the dynamo will also starts to rotate. A dynamo is a device which is used to convert the kinetic energy into electrical energy. The generated power can be stored in the battery and then this electric power has loaded to the D.C compressor. The air compressor compresses the atmospheric air and it stored in the air tank and the air tank has pressure relief valve to control the pressure in the tank . The air tank supplies the compressed pneumatic power to the pneumatic actuator through solenoid valve to apply brake. The pneumatic actuator is a double acting cylinder which converts hydraulic energy into linear moti on.
Automobile Engineering
K. Amarnath Reddy wrote a document about advances in automobile engineering, specifically focusing on internal combustion engines. The document discussed the history of internal combustion engines and their applications. It described the basic workings of two-stroke and four-stroke engines and their advantages and disadvantages. The document also examined six-stroke engines, factors affecting engine development like cost and environment, areas of development like timing controls and fuel injection, and materials used in engine manufacturing. In conclusion, it stated that mechanical engineers can improve existing engine models and internal combustion engines will continue powering vehicles despite environmental concerns.
Basics Of Automobile
This document provides training on automotive technology basics for dealer sales consultants. It aims to teach them the terminology and specifications used in sales materials so they can better explain vehicles to customers. The document covers systems in vehicles like the power train, running, and comfort systems. It also provides details on the anatomy of different automobile types. A large portion is dedicated to explaining the engine and its components, fuel system, intake system, and other supporting systems in depth. The goal is for sales consultants to have sufficient technical knowledge after the training.
Denso hp4 1
This document provides an overview of common rail diesel fuel systems presented by Tony Kitchen of AK Training. It describes the key components of common rail systems including the high pressure fuel pump, fuel metering control valve, high pressure accumulator/common rail, fuel rail pressure sensor and control valve, and fuel injectors. The advantages of common rail systems are higher injection pressures, finer fuel atomization, and ability for multiple injections which reduce emissions and improve fuel efficiency.
COMMON RAIL DIESEL INJECTION (CRDI;CRDe)
The common rail fuel injection system is finding increasing use engines as it has the potential to drastically cut emissions and fuel consumption. This system provides control of many important parameters linked to the injection system. It has a wide range of applications, From small to heavy-duty engines.
Ambassador Presentation
The document introduces the VDL Ambassador, a light-weight bus concept developed to reduce operating costs through lower fuel consumption, easier maintenance, and a simpler assembly process. The Ambassador uses sandwich construction and lighter components to decrease weight compared to conventional buses. Key features highlighted include the Ambassador's reduced weight of 8,900kg versus over 11,000kg for a conventional bus, expected 12-16% reduction in fuel consumption, and focus on driver ergonomics, passenger safety and comfort, and easy serviceability.
IFAC 2014, Design of Power Steering Systems for Heavy-Duty Long-Haul Vehicles
To overcome the drawbacks of a sequential design approach, this paper shows the precise combination of technology, topology, size and control for the power steering system used in a heavy-duty vehicle. Modeling of six possible topologies and optimal sizing of components, as the gear ratio between combustion engine and power steering pump, are shown. Next, a sensitivity analysis is done for control parameters and a view is presented on a suitable topology for a power steering system used in a heavy-duty long-haul vehicle.
Presentation1 jamshed alam
This document provides an overview of an air brake system seminar. It discusses the history of Indian railways, introduces air brakes and their components. It describes the working principle of single and twin pipe air brake systems. The functions of key components like the compressor, main reservoir, brake pipe and triple valve are explained. Advantages of air brakes like availability of air and corrosion resistance are highlighted. Maintenance and initial cost are noted as limitations.
Electronic Power Steering (EPS) by Gaurav Raikar
This document summarizes the history and types of electronic power steering systems. It discusses the early developments of power steering in vehicles in the late 19th century. Hydraulic power steering became common starting in the 1950s using hydraulic fluid and actuators to augment steering effort. More recently, electro-hydraulic and electronic power steering have been developed using electric motors and control units instead of hydraulic pumps and fluid. Electronic power steering systems provide variable assistance based on driving conditions and are more energy efficient than hydraulic systems. Future developments may include fully electronic "steer-by-wire" systems without any mechanical linkages between the steering wheel and wheels.
Classification of Automobiles
Classification of Automobiles based on different parameters is pointwise listed in this presentation.
Railway wagon braking system pdf by salim malik
The document discusses different braking systems used in railway wagons and passenger cars. It describes how the main braking systems - air brakes, vacuum brakes, and electric dynamic brakes - work by converting kinetic energy from a moving train into heat energy to slow and stop the train. It also introduces newer electronically controlled pneumatic brakes that aim to overcome some limitations of traditional air braking systems. Specifically, air brakes are now the most common system and work by using compressed air to push brake blocks onto wheels or pads onto discs to slow the train down.
Railway wagon braking system ppt
The document discusses different braking systems used in railway vehicles. It begins by explaining that brakes are critical for stopping and controlling the speed of trains by converting their kinetic energy into heat. There are four main types of braking systems: pneumatic, electrodynamic, mechanical, and electromagnetic. Pneumatic braking uses air pressure and includes vacuum and compressed air systems. Electrodynamic braking uses traction motors to brake trains, while mechanical brakes use friction directly on the wheels. Electromagnetic braking is particularly important for high-speed trains where it provides efficient braking through magnets. The document explores these different systems in further detail and concludes that electromagnetic braking is the most efficient method for high-speed trains.
Halderman ch030 lecture
The document provides information on cylinder head and valve guide service, including:
1) It describes the steps to recondition a cylinder head, including disassembly, cleaning, inspection of parts, and machining or replacing worn components.
2) It explains how to inspect and measure valve guides, and discusses options for repairing worn guides, including replacing or reaming guides.
3) It provides specifications for valve stem-to-guide clearance and recommendations for machining cylinder heads and valve guides.
HYDRAULIC BRAKING SYSTEMS
Hydraulic braking systems use pressurized brake fluid to transmit force through the hydraulic circuit and generate braking force. The fluid pressure is created by the brake pedal acting on the master cylinder and distributed through the lines to the wheel cylinders or calipers, where pistons increase the force and create braking force to slow the vehicle. Drum brakes use expanding brake shoes to create friction on the inner surface of the drum, while disc brakes use calipers and brake pads to squeeze the rotor. Hydraulic systems provide balanced braking force to all wheels through proportioning valves.
Hybrid Electric Vehicles
This document discusses hybrid electric vehicles (HEVs). HEVs combine a conventional internal combustion engine system with an electric propulsion system to improve fuel economy and reduce emissions. The objectives of HEVs are to maximize fuel economy, minimize emissions and costs, and maintain performance. Key components include electric motors, energy storage batteries or capacitors, and a transmission. HEVs can use series, parallel, or dual-mode propulsion configurations. Examples given are the Toyota Prius and Honda Insight hybrids. Challenges for HEVs include improving energy storage and reducing costs.
Power steering
This document presents information on power steering. It discusses the history of power steering from its invention in 1876 to its use in automobiles and agricultural vehicles. It describes the key components of power steering systems, including the reservoir, steering gearbox, rotary valve, and pump. It also covers the different types of power steering such as hydraulic, electro-hydraulic, and electric systems; and compares their workings. The document concludes by noting the advantages of power steering in reducing driver fatigue while providing easy steering control and its common applications in modern vehicles.
Brake system
1) The document describes a student project to design a simplified hydraulic braking system for an electric vehicle due to congestion preventing a direct connection between the brake pedal and booster.
2) The proposed system uses a hydraulic transmitter and receiver to transmit the energy applied to the pedal to the master cylinder. A test model was built with supports to withstand forces and ensure proper alignment of components.
3) Testing showed the wheel could be fully braked by the system as it transmitted force applied to the pedal through hydraulic pressure to actuate the brake pads, providing an alternative solution for vehicles with space constraints.
Sicas Euroclean Industrial Na2c1 Eco Century - City
This document provides technical specifications for the Eco-Century 222.555 street sweeper. It has a 4-cylinder turbocharged diesel engine, articulated 4-wheel steel chassis, hydrostatic transmission, sprung front and rear axles, power steering, and disc brakes. The sweeping system uses two hydraulically operated front brushes and a steel suction fan. It has a 2 cubic meter stainless steel hopper and water-based dust suppression system. Standard sweeping width is 2 meters at 12 kph, with an optional third brush increasing it to 2.7 meters.
SL2 street washer Sicas Euroclean
The SL2V street washing machine has a 4 cylinder turbocharged diesel engine with 55 kW of power. It features a steel articulated chassis with 4 wheel drive and hydrostatic transmission. The washing system uses a 40 bar pump to deliver 50 liters of water per minute through front and side mounted nozzles that can wash up to a 2800 mm width at 12 km/h. Optional equipment includes air conditioning, a high pressure pump, spare wheel, and rear view camera.
Millennium Deutz - Sicas Euroclean Industrial
This document provides a technical description of a street sweeper vehicle with a Deutz engine. The sweeper has a steel chassis and 4-wheel drive powered by a 4-cylinder common rail diesel engine. It features a 2-seat cabin, hydrostatic transmission, front and rear suspension, hydraulic steering, and 4-wheel disc brakes. The sweeping system includes 2 side brushes, an 824mm diameter suction fan, and a 4.2m3 stainless steel hopper. It also has a water-based dust suppression system and can sweep at speeds up to 15km/h. Optional extras include air conditioning, high pressure washing, and a third front brush.
More Related Content
What's hot
F6 - Striving Excellence
BYD Auto's F6 sedan provides elegant design, stunning performance, and value for money. It was awarded best debuted car at the 12th Shanghai Auto Show. The F6 has a Mitsubishi 2.4L engine and tiptronic transmission for powerful performance. It also has luxury interior features like leather seats, navigation, and cruise control. The F6 aims to attract customers seeking both high-end style and spacious comfort at an affordable price.
Air brake-system-using-exhaust-gas power point presentation
The aim is to design and to develop an air brake system based on exhaust gas is called “fabrication of air brake system using engine exhaust gas”. The main aim of this project is to reduce the workloads of the engine drive to operate the air compressor, because here the compressor is not operated by the engine drive.
Here we are placing a turbine in the path of exhaust from the engine. The turbine e is connected to a dynamo by means of coupling, which is used to generate power. Depending upon the airflow the turbine will start rotating, and then the dynamo will also starts to rotate. A dynamo is a device which is used to convert the kinetic energy into electrical energy. The generated power can be stored in the battery and then this electric power has loaded to the D.C compressor. The air compressor compresses the atmospheric air and it stored in the air tank and the air tank has pressure relief valve to control the pressure in the tank . The air tank supplies the compressed pneumatic power to the pneumatic actuator through solenoid valve to apply brake. The pneumatic actuator is a double acting cylinder which converts hydraulic energy into linear moti on.
Air brake-system-using-exhaust-gas-final-report
The aim is to design and to develop an air brake system based on exhaust gas is called “fabrication of air brake system using engine exhaust gas”. The main aim of this project is to reduce the workloads of the engine drive to operate the air compressor, because here the compressor is not operated by the engine drive.
Here we are placing a turbine in the path of exhaust from the engine. The turbine e is connected to a dynamo by means of coupling, which is used to generate power. Depending upon the airflow the turbine will start rotating, and then the dynamo will also starts to rotate. A dynamo is a device which is used to convert the kinetic energy into electrical energy. The generated power can be stored in the battery and then this electric power has loaded to the D.C compressor. The air compressor compresses the atmospheric air and it stored in the air tank and the air tank has pressure relief valve to control the pressure in the tank . The air tank supplies the compressed pneumatic power to the pneumatic actuator through solenoid valve to apply brake. The pneumatic actuator is a double acting cylinder which converts hydraulic energy into linear moti on.
Automobile Engineering
K. Amarnath Reddy wrote a document about advances in automobile engineering, specifically focusing on internal combustion engines. The document discussed the history of internal combustion engines and their applications. It described the basic workings of two-stroke and four-stroke engines and their advantages and disadvantages. The document also examined six-stroke engines, factors affecting engine development like cost and environment, areas of development like timing controls and fuel injection, and materials used in engine manufacturing. In conclusion, it stated that mechanical engineers can improve existing engine models and internal combustion engines will continue powering vehicles despite environmental concerns.
Basics Of Automobile
This document provides training on automotive technology basics for dealer sales consultants. It aims to teach them the terminology and specifications used in sales materials so they can better explain vehicles to customers. The document covers systems in vehicles like the power train, running, and comfort systems. It also provides details on the anatomy of different automobile types. A large portion is dedicated to explaining the engine and its components, fuel system, intake system, and other supporting systems in depth. The goal is for sales consultants to have sufficient technical knowledge after the training.
Denso hp4 1
This document provides an overview of common rail diesel fuel systems presented by Tony Kitchen of AK Training. It describes the key components of common rail systems including the high pressure fuel pump, fuel metering control valve, high pressure accumulator/common rail, fuel rail pressure sensor and control valve, and fuel injectors. The advantages of common rail systems are higher injection pressures, finer fuel atomization, and ability for multiple injections which reduce emissions and improve fuel efficiency.
COMMON RAIL DIESEL INJECTION (CRDI;CRDe)
The common rail fuel injection system is finding increasing use engines as it has the potential to drastically cut emissions and fuel consumption. This system provides control of many important parameters linked to the injection system. It has a wide range of applications, From small to heavy-duty engines.
Ambassador Presentation
The document introduces the VDL Ambassador, a light-weight bus concept developed to reduce operating costs through lower fuel consumption, easier maintenance, and a simpler assembly process. The Ambassador uses sandwich construction and lighter components to decrease weight compared to conventional buses. Key features highlighted include the Ambassador's reduced weight of 8,900kg versus over 11,000kg for a conventional bus, expected 12-16% reduction in fuel consumption, and focus on driver ergonomics, passenger safety and comfort, and easy serviceability.
IFAC 2014, Design of Power Steering Systems for Heavy-Duty Long-Haul Vehicles
To overcome the drawbacks of a sequential design approach, this paper shows the precise combination of technology, topology, size and control for the power steering system used in a heavy-duty vehicle. Modeling of six possible topologies and optimal sizing of components, as the gear ratio between combustion engine and power steering pump, are shown. Next, a sensitivity analysis is done for control parameters and a view is presented on a suitable topology for a power steering system used in a heavy-duty long-haul vehicle.
Presentation1 jamshed alam
This document provides an overview of an air brake system seminar. It discusses the history of Indian railways, introduces air brakes and their components. It describes the working principle of single and twin pipe air brake systems. The functions of key components like the compressor, main reservoir, brake pipe and triple valve are explained. Advantages of air brakes like availability of air and corrosion resistance are highlighted. Maintenance and initial cost are noted as limitations.
Electronic Power Steering (EPS) by Gaurav Raikar
This document summarizes the history and types of electronic power steering systems. It discusses the early developments of power steering in vehicles in the late 19th century. Hydraulic power steering became common starting in the 1950s using hydraulic fluid and actuators to augment steering effort. More recently, electro-hydraulic and electronic power steering have been developed using electric motors and control units instead of hydraulic pumps and fluid. Electronic power steering systems provide variable assistance based on driving conditions and are more energy efficient than hydraulic systems. Future developments may include fully electronic "steer-by-wire" systems without any mechanical linkages between the steering wheel and wheels.
Classification of Automobiles
Classification of Automobiles based on different parameters is pointwise listed in this presentation.
Railway wagon braking system pdf by salim malik
The document discusses different braking systems used in railway wagons and passenger cars. It describes how the main braking systems - air brakes, vacuum brakes, and electric dynamic brakes - work by converting kinetic energy from a moving train into heat energy to slow and stop the train. It also introduces newer electronically controlled pneumatic brakes that aim to overcome some limitations of traditional air braking systems. Specifically, air brakes are now the most common system and work by using compressed air to push brake blocks onto wheels or pads onto discs to slow the train down.
Railway wagon braking system ppt
The document discusses different braking systems used in railway vehicles. It begins by explaining that brakes are critical for stopping and controlling the speed of trains by converting their kinetic energy into heat. There are four main types of braking systems: pneumatic, electrodynamic, mechanical, and electromagnetic. Pneumatic braking uses air pressure and includes vacuum and compressed air systems. Electrodynamic braking uses traction motors to brake trains, while mechanical brakes use friction directly on the wheels. Electromagnetic braking is particularly important for high-speed trains where it provides efficient braking through magnets. The document explores these different systems in further detail and concludes that electromagnetic braking is the most efficient method for high-speed trains.
Halderman ch030 lecture
The document provides information on cylinder head and valve guide service, including:
1) It describes the steps to recondition a cylinder head, including disassembly, cleaning, inspection of parts, and machining or replacing worn components.
2) It explains how to inspect and measure valve guides, and discusses options for repairing worn guides, including replacing or reaming guides.
3) It provides specifications for valve stem-to-guide clearance and recommendations for machining cylinder heads and valve guides.
HYDRAULIC BRAKING SYSTEMS
Hydraulic braking systems use pressurized brake fluid to transmit force through the hydraulic circuit and generate braking force. The fluid pressure is created by the brake pedal acting on the master cylinder and distributed through the lines to the wheel cylinders or calipers, where pistons increase the force and create braking force to slow the vehicle. Drum brakes use expanding brake shoes to create friction on the inner surface of the drum, while disc brakes use calipers and brake pads to squeeze the rotor. Hydraulic systems provide balanced braking force to all wheels through proportioning valves.
Hybrid Electric Vehicles
This document discusses hybrid electric vehicles (HEVs). HEVs combine a conventional internal combustion engine system with an electric propulsion system to improve fuel economy and reduce emissions. The objectives of HEVs are to maximize fuel economy, minimize emissions and costs, and maintain performance. Key components include electric motors, energy storage batteries or capacitors, and a transmission. HEVs can use series, parallel, or dual-mode propulsion configurations. Examples given are the Toyota Prius and Honda Insight hybrids. Challenges for HEVs include improving energy storage and reducing costs.
Power steering
This document presents information on power steering. It discusses the history of power steering from its invention in 1876 to its use in automobiles and agricultural vehicles. It describes the key components of power steering systems, including the reservoir, steering gearbox, rotary valve, and pump. It also covers the different types of power steering such as hydraulic, electro-hydraulic, and electric systems; and compares their workings. The document concludes by noting the advantages of power steering in reducing driver fatigue while providing easy steering control and its common applications in modern vehicles.
Brake system
1) The document describes a student project to design a simplified hydraulic braking system for an electric vehicle due to congestion preventing a direct connection between the brake pedal and booster.
2) The proposed system uses a hydraulic transmitter and receiver to transmit the energy applied to the pedal to the master cylinder. A test model was built with supports to withstand forces and ensure proper alignment of components.
3) Testing showed the wheel could be fully braked by the system as it transmitted force applied to the pedal through hydraulic pressure to actuate the brake pads, providing an alternative solution for vehicles with space constraints.
What's hot (19)
Air brake-system-using-exhaust-gas power point presentation
Air brake-system-using-exhaust-gas power point presentation
IFAC 2014, Design of Power Steering Systems for Heavy-Duty Long-Haul Vehicles
IFAC 2014, Design of Power Steering Systems for Heavy-Duty Long-Haul Vehicles
Similar to Millennium MAN Sicas Euroclean
Sicas Euroclean Industrial Na2c1 Eco Century - City
This document provides technical specifications for the Eco-Century 222.555 street sweeper. It has a 4-cylinder turbocharged diesel engine, articulated 4-wheel steel chassis, hydrostatic transmission, sprung front and rear axles, power steering, and disc brakes. The sweeping system uses two hydraulically operated front brushes and a steel suction fan. It has a 2 cubic meter stainless steel hopper and water-based dust suppression system. Standard sweeping width is 2 meters at 12 kph, with an optional third brush increasing it to 2.7 meters.
SL2 street washer Sicas Euroclean
The SL2V street washing machine has a 4 cylinder turbocharged diesel engine with 55 kW of power. It features a steel articulated chassis with 4 wheel drive and hydrostatic transmission. The washing system uses a 40 bar pump to deliver 50 liters of water per minute through front and side mounted nozzles that can wash up to a 2800 mm width at 12 km/h. Optional equipment includes air conditioning, a high pressure pump, spare wheel, and rear view camera.
Millennium Deutz - Sicas Euroclean Industrial
This document provides a technical description of a street sweeper vehicle with a Deutz engine. The sweeper has a steel chassis and 4-wheel drive powered by a 4-cylinder common rail diesel engine. It features a 2-seat cabin, hydrostatic transmission, front and rear suspension, hydraulic steering, and 4-wheel disc brakes. The sweeping system includes 2 side brushes, an 824mm diameter suction fan, and a 4.2m3 stainless steel hopper. It also has a water-based dust suppression system and can sweep at speeds up to 15km/h. Optional extras include air conditioning, high pressure washing, and a third front brush.
Shear connector kalimantan 081281000409
System shear connector kalimantan digunakan sebagai aplikasi dalam konstruksi bangunan untuk menghasilkan kekuatan coran beton lebih kuat dan stabil sesuai dengan perhitungan engineering civil. Dalam hal ini ada 2 hal perhitungan kekuatan secara umum yaitu kekuatan kelengketan stud pada batang baja sesudah dilas. Dan yang kedua adalah kekuatan stud bolt yang digunakan.
Hunter APC Flyer
The document provides specifications for the Hunter APC built on a Toyota Land Cruiser 200 chassis. Some key details:
- It is designed to carry eight people with equipment for operational requirements.
- Features include improved thermal insulation to keep operators cool, and a redesigned air conditioning system for comfort in harsh environments.
- It has a 4.6L V8 turbo diesel engine with 304 horsepower, and can be tailored to suit multiple operational needs.
2015 MV Agusta F3 800 spec sheet
This document provides technical specifications for an MV Agusta motorcycle. It can reach a maximum speed of 269 km/h and has a 798cc 3-cylinder engine producing 148 horsepower. The frame is constructed of steel tubing with aluminum swing arms. Suspension components include a Marzocchi telescopic fork in front and a Sachs rear shock. Brakes are radial Brembo calipers with 320mm discs in front and a 220mm rear disc. Additional details provided include transmission and gear ratios, electrical system, dimensions, weight and color/price options.
2016 yxz1000r-service-guide-final-ver-2
This document provides specifications and detailed component information for the 2016 YXZ1000R side-by-side vehicle. It includes specifications such as engine type, bore and stroke, transmission type, suspension travel, and dimensions. The document also includes detailed diagrams and descriptions of major engine components such as the cylinder head, valves, camshaft, and timing chain tensioner. Service tips are provided for inspection and tensioner rod retraction of the timing chain tensioner.
5086(6) js115 lc final
This document provides detailed specifications and dimensions for a tracked excavator. It includes information on the excavator's operating weight, engine power, hydraulic system, undercarriage, swing system, cab features, and bucket/attachment compatibility. Dimensional data is provided for the excavator body and various attachments in both metric and imperial units. Performance specs are given for digging reach, digging depth, dumping height, and tearout forces depending on attachment configuration.
2016 Mercedes GLC Technical Data
Stuttgart/Metzingen. The second generation of the mid-range SUV from Mercedes-Benz goes by the name of GLC and represents a big step forward on several fronts: On a technical level the new SUV clearly makes its mark with the excellent standard of safety that is a brand hallmark, featuring state-of-the-art assistance systems and outstanding energy efficiency. Fuel consumption has been cut by up to 19 percent in comparison to the previous model. At the same time, the AIR BODY CONTROL multi-chamber air suspension that is without parallel in this segment, the extended range of DYNAMIC SELECT dynamic transmission modes and the 4MATIC permanent all-wheel drive increase not only the ride comfort, but also the vehicle's sporty agility – whatever surface it is driving on. Visually, the body follows the clear and sensual design idiom which was demonstrated so successfully by the GLC Coupé showcar concept in the spring, and which serves as the standard for future SUV families.
manual_de_servicio_faw_ca4df2-13.pdf
This document is an operation manual for a FAW model CA5083XXYPK2L1A80 cab-over-engine diesel truck. The manual provides specifications for the vehicle including its dimensions, engine and transmission details, fuel and brake systems, and maintenance procedures. It aims to guide users in properly operating and maintaining the truck to maximize performance and service life.
The e-MP Series
The e-MP Series
HIGHLY EFFICIENT AND VERSATILE MULTISTAGE RING SECTION PUMPS UP TO 1700hp
Applications limited only by your imagination
RCM Otto Rider Floor Sweeper | Sweepers Australia
Sweepers Australia Introducing RCM Otto With 140 cm sweeping path with two side brushes, Otto ensures high cleaning performance in medium sized areas both indoor and outdoor.
Lawn Mower Tractors Seco Group
The Product overview catalogue of high-quality lawn mower tractors. Tractors are made in the Czech Republic (Europe) in the factory with tradition since 1888.
M PUMPS product range_Industry
This brochure illustrate M PUMPS production range for industrial applications. Metallic and non metallic pumps, from small dosing sliding vane pumps, to big overhung and between bearing heavy duty pumps. All these products are 100% made in M PUMPS.
Mp 300 specs
This document summarizes the specifications for a 300 NQ drilling rig. It has a Kubota V2203 diesel engine that produces 36.6 kW/49.7 HP. The hydraulic system includes a primary pump producing 80LPM at 3000 psi and an auxiliary pump producing 25 LPM at 2000 psi. The drill head can rotate from 0-750 RPM with 330 Nm of torque. It has a depth capacity of 300 meters for NQ wireline, 200 meters for H wireline, and 80 meters for P wireline. The main hoist is a hydraulic planetary winch that can pull 2700 kg at a line speed of 31.5 meters per minute. Additional features include a 1.8 meter feed travel
street sweeper M60 plus
This document provides specifications for the M60plus 6 m3 mechanical-suction road sweeper. It has a Volvo Stage IIIA or V engine with 4 cylinders and 105 kW of power. Key features include 4-wheel steering, hydraulic front and rear suspensions, a 6 m3 hopper, a 1 turbine hydraulic vacuum system, and optional accessories like side brush casings and a high pressure washing system. The sweeper uses a mechanical-suction system to collect waste with side, central, and vertical loading brushes before dust is captured by the suction turbine and large surface filter.
Elite Cementing Trailer 1.ppt
This document provides details on the Elite Cementing Trailer designed and built by Zonal Isolation Technology Exchange starting in November 1998. The trailer utilizes standardized components, improved cement mixing technology, and ergonomic operator features. It can be configured as a single or twin pump trailer. The example trailer shown is a twin pump unit pulled by a Kenworth truck with a 344 inch trailer. It includes two centrifugal pumps powered by Cat diesel engines with a total of 660 horsepower. The trailer also features a computerized cement mixing and monitoring system, aluminum mixing tub, measuring tank, and walkways for operator safety and accessibility.
Yamaha YZF-R3 - Press Release
The YZF-R3 is a lightweight A2-licensed supersport bike developed using Yamaha's R-series DNA. It has a powerful 321cc inline twin cylinder engine that produces 30.9kW of power and excellent torque. The bike features an aerodynamic full fairing, sporty yet comfortable suspension, and strong braking performance from its front and rear disc brakes with ABS. The YZF-R3 is designed for everyday use on urban roads and highways.
Project of lpo 1512(narendra pal)
This document provides specifications for a Tata LPO 1512 truck, including details about the Cummins 6BTAA 5.9L diesel engine with 6 cylinders, fuel and air filters, 6-speed transmission, rear axle, brakes, frame, suspension, tires, fuel tank, electrical system, dimensions, and weights. The engine produces 99kW at 2200 rpm and 490 Nm of torque at 1400 rpm. The transmission has 6 forward gears and 1 reverse gear. The rear axle has a ratio of 50,857:1.
Motor driven pumps
The document describes a series of motor driven dosing pumps manufactured in Italy. It provides details on the technical specifications, performance characteristics, and materials of construction of the pump models. The pumps offer adjustable flow rates from 0-100% and precise dosage of chemicals. They are designed and manufactured using CAD technology and the highest quality materials.
Similar to Millennium MAN Sicas Euroclean (20)
Sicas Euroclean Industrial Na2c1 Eco Century - City
Sicas Euroclean Industrial Na2c1 Eco Century - City
Recently uploaded
Levelised Cost of Hydrogen (LCOH) Calculator Manual
The aim of this manual is to explain the
methodology behind the Levelized Cost of
Hydrogen (LCOH) calculator. Moreover, this
manual also demonstrates how the calculator
can be used for estimating the expenses associated with hydrogen production in Europe
using low-temperature electrolysis considering different sources of electricity
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
* Registration is currently open *
Call for Research Papers!!!
Free – Extended Paper will be published as free of cost.
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
July 13 ~ 14, 2024, Virtual Conference
Webpage URL: https://aiad2024.org/index
Submission Deadline: June 22, 2024
Submission System URL:
https://aiad2024.org/submission/index.php
Contact Us:
Here's where you can reach us : aiad@aiad2024.org (or) aiadconference@yahoo.com
WikiCFP URL: http://wikicfp.com/cfp/servlet/event.showcfp?eventid=180509©ownerid=171656
#artificialintelligence #softcomputing #machinelearning #technology #datascience #python #deeplearning #tech #robotics #innovation #bigdata #coding #iot #computerscience #data #dataanalytics #engineering #robot #datascientist #software #automation #analytics #ml #pythonprogramming #programmer #digitaltransformation #developer #promptengineering #generativeai #genai #chatgpt #artificial #intelligence #datamining #networkscommunications #robotics #callforsubmission #submissionsopen #deadline #opencall #virtual #conference
一比一原版(USF毕业证)旧金山大学毕业证如何办理
原件一模一样【微信：95270640】【旧金山大学毕业证USF学位证成绩单】【微信：95270640】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：95270640】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：95270640】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：95270640】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理旧金山大学毕业证USF学位证毕业证学位证【微信：95270640 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
SCALING OF MOS CIRCUITS m .pptx
this ppt explains about scaling parameters of the mosfet it is basically vlsi subject
Power Electronics- AC -AC Converters.pptx
This PPT is about AC-AC Converters, including AC Voltage controllers and Cycloconverters, their types, and control.
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
Supermarket Management System Project Report.pdf
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
OOPS_Lab_Manual - programs using C++ programming language
This manual contains programs on object oriented programming concepts using C++ language.
Bituminous road construction project based learning report
Road construction is not as easy as it seems to be, it includes various steps and it starts with its designing and
structure including the traffic volume consideration. Then base layer is done by bulldozers and levelers and after
base surface coating has to be done. For giving road a smooth surface with flexibility, Asphalt concrete is used.
Asphalt requires an aggregate sub base material layer, and then a base layer to be put into first place. Asphalt road
construction is formulated to support the heavy traffic load and climatic conditions. It is 100% recyclable and
saving non renewable natural resources.
With the advancement of technology, Asphalt technology gives assurance about the good drainage system and with
skid resistance it can be used where safety is necessary such as outsidethe schools.
The largest use of Asphalt is for making asphalt concrete for road surfaces. It is widely used in airports around the
world due to the sturdiness and ability to be repaired quickly, it is widely used for runways dedicated to aircraft
landing and taking off. Asphalt is normally stored and transported at 150’C or 300’F temperature
FULL STACK PROGRAMMING - Both Front End and Back End
This ppt gives details about Full Stack Programming and its basics.
Determination of Equivalent Circuit parameters and performance characteristic...
Includes the testing of induction motor to draw the circle diagram of induction motor with step wise procedure and calculation for the same. Also explains the working and application of Induction generator
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Join us for this solutions-based webinar on the tools and techniques for commissioning and maintaining PV Systems. In this session, we'll review the process of building and maintaining a solar array, starting with installation and commissioning, then reviewing operations and maintenance of the system. This course will review insulation resistance testing, I-V curve testing, earth-bond continuity, ground resistance testing, performance tests, visual inspections, ground and arc fault testing procedures, and power quality analysis.
Fluke Solar Application Specialist Will White is presenting on this engaging topic:
Will has worked in the renewable energy industry since 2005, first as an installer for a small east coast solar integrator before adding sales, design, and project management to his skillset. In 2022, Will joined Fluke as a solar application specialist, where he supports their renewable energy testing equipment like IV-curve tracers, electrical meters, and thermal imaging cameras. Experienced in wind power, solar thermal, energy storage, and all scales of PV, Will has primarily focused on residential and small commercial systems. He is passionate about implementing high-quality, code-compliant installation techniques.
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
The need for ecofriendly materials as building materials in this century cannot be overemphasized
Unit -II Spectroscopy - EC I B.Tech.pdf
Chemical engineering and electronics engineering and chemical development of the day of the almighty paw paw paw
Impartiality as per ISO /IEC 17025:2017 Standard
This document provides basic guidelines for imparitallity requirement of ISO 17025. It defines in detial how it is met and wiudhwdih jdhsjdhwudjwkdbjwkdddddddddddkkkkkkkkkkkkkkkkkkkkkkkwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwioiiiiiiiiiiiii uwwwwwwwwwwwwwwwwhe wiqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq gbbbbbbbbbbbbb owdjjjjjjjjjjjjjjjjjjjj widhi owqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq uwdhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhwqiiiiiiiiiiiiiiiiiiiiiiiiiiiiw0pooooojjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj whhhhhhhhhhh wheeeeeeee wihieiiiiii wihe
e qqqqqqqqqqeuwiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiqw dddddddddd cccccccccccccccv s w c r
cdf cb bicbsad ishd d qwkbdwiur e wetwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww w
dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffw
uuuuhhhhhhhhhhhhhhhhhhhhhhhhe qiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ccccccccccccccccccccccccccccccccccc bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbu uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuum
m
m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm m i
g i dijsd sjdnsjd ndjajsdnnsa adjdnawddddddddddddd uw
Recently uploaded (20)
Levelised Cost of Hydrogen (LCOH) Calculator Manual
Levelised Cost of Hydrogen (LCOH) Calculator Manual
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
OOPS_Lab_Manual - programs using C++ programming language
OOPS_Lab_Manual - programs using C++ programming language
Bituminous road construction project based learning report
Bituminous road construction project based learning report
FULL STACK PROGRAMMING - Both Front End and Back End
FULL STACK PROGRAMMING - Both Front End and Back End
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
Determination of Equivalent Circuit parameters and performance characteristic...
Determination of Equivalent Circuit parameters and performance characteristic...
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
Millennium MAN Sicas Euroclean
- 1. STREET SUCTION SWEEPERSTREET SUCTION SWEEPER MILLENNIUM NA4M6 ModelMILLENNIUM NA4M6 Model Millennium New GenerationMillennium New Generation Euro 5 EEVEuro 5 EEV
- 2. TECHNICAL DATATECHNICAL DATA CHASSIS 4 wheel, steel chassis, automotive design MOTOR 4 cylinder common rail diesel engine MAN 4580 cc model D0834LFL61 rated output 132 kW @ 2400 rpm Euro 5 EEV homologated CABIN steel structure 2 seats, drivers station can glide from left to right TRANSMISSION hydrostatic, automotive type with electronic control rear drive 2 speed mode (travel - work) SUSPENSION front: floating axle with rubber coated springs and shock absorbers rear: leaf springs STEERING hydraulic system BRAKES 4 wheel disc brakes with dual calipers on all wheels SWEEP GEAR 2 hydraulically operated side brushes and allowing sideways movement, optional third front brush SUCTION SYSTEM 830 mm dia. steel suction fan fan capacity 18000 cu m per hour 700 mm steel suction nozzle HOPPER geometrical volume 4,6 m³ in stainless steel DUST SUPPRESSION SYSTEM water operated by electric pump, atomizing nozzles at brushes, suction nozzle and suction tube. 700 litre capacity stainless steel tank WEIGHTS in operating condition 5700 kg payload 5200 kg gross total weight 10900 kg PERFORMANCE standard sweeping width 2200 mm sweeping width with third brush 3150 mm sweep speed 15 km/h. travel speed 42,5 km/h MAIN OPTIONS air conditioning high pressure wash jetting lance high pressure Street washing bar spare wheel rear view camera third brush overhead boom wander hose Sicas Euroclean Industrial www.sicaseuroclean.eu Via S. Pellico, 2 - 20089 Rozzano (MI) - Italy - Tel. 02 57514340 - Fax +39 02 57513878