This document contains the configuration export of a MikroTik RouterOS device. It defines the network interfaces, IP addresses, DHCP server, wireless settings, and other network settings. Ethernet ports are configured for WAN and LAN networks, addresses are set on each interface, and a DHCP server is enabled on the LAN subnet to assign client addresses. A wireless network is configured to operate in bridge mode to share the LAN connection.

1. MikroTik RouterOS 6.48.4 (c) 1999-2021 http://www.mikrotik.com/
[admin@MikroTik Nodo haciendita] > exp
# sep/30/2021 15:03:47 by RouterOS 6.48.4
# software id = 7UZ8-AMHJ
#
# model = OmniTIK UPA-5HnD r2
# serial number = 67E006BD127D
/interface bridge
add name=bridge1
/interface ethernet
set [ find default-name=ether1 ] comment=WAN1
set [ find default-name=ether2 ] comment="WAN 2"
set [ find default-name=ether3 ] comment=LAN1 poe-out=off
set [ find default-name=ether4 ] comment=LAN2
set [ find default-name=ether5 ] comment=LAN3
/interface wireless
set [ find default-name=wlan1 ] band=5ghz-a/n comment=WIFI-OMINITIK
default-forwarding=no disabled=no frequency=5700 mode=ap-bridge radio-name=
"Inv Yeshua" rate-set=configured ssid="MikroTik Haciendita" wireless-protocol=
802.11
/interface wireless manual-tx-power-table
set wlan1 comment=WIFI-OMINITIK
/interface wireless nstreme
set wlan1 comment=WIFI-OMINITIK enable-nstreme=yes
/interface list
add name=WAN
add name=LAN
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=dhcp_pool0 ranges=50.50.50.2-50.50.50.254

2. /ip dhcp-server
add address-pool=dhcp_pool0 disabled=no interface=ether3 name=dhcp1
/interface bridge port
add bridge=bridge1 disabled=yes interface=ether1
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=ether4
add bridge=bridge1 interface=ether5
add bridge=bridge1 interface=wlan1
/ip neighbor discovery-settings
set discover-interface-list=!dynamic
/interface list member
add interface=ether1 list=WAN
add interface=bridge1 list=LAN
/ip address
add address=90.90.90.0/24 comment="WIFI OMNITIK" interface=wlan1 network=90.90.90.0
add address=50.50.50.1/24 comment=LAN1 interface=ether3 network=50.50.50.0
add address=100.100.100.1/24 comment=LAN2 interface=ether4 network=100.100.100.0
add address=110.110.110.1/24 comment=LAN3 interface=ether5 network=110.110.110.0
add address=60.60.60.1/24 comment=WAN2 interface=ether2 network=60.60.60.0
add address=70.70.70.1/24 comment=bridge1 interface=bridge1 network=70.70.70.0
/ip dhcp-client
add disabled=no interface=ether1
/ip dhcp-server network
add address=50.50.50.0/24 gateway=50.50.50.1
/system clock
set time-zone-name=America/Caracas
/system identity
set name="MikroTik Nodo haciendita"