Mep presentation team 1
•Download as PPTX, PDF•
1 like•1,753 views
This document provides an overview of the design and development of a project located at 57 Quayaside. It discusses using laser scanning to create a point cloud dataset and generate a Revit model. It also covers meetings to discuss the design, including piled foundations, universal columns, beams, cross bracing, upper floors, and MEP systems for ventilation, heating, lighting, and floor voids. Models for architectural, structural, and MEP designs were coordinated in Navisworks to check for clashes.
Report
Share
Report
Share
Recommended
Ck21 presentation team 1
This document outlines the design development of a building project located at 57 Quayaside. It discusses using laser scanning to acquire point cloud data and transfer it to a Revit model. The design development section lists elements like retaining walls, piled foundations, universal columns and beams to support the basement, upper floors, and future mezzanine level. Next steps include clashing the structural and architectural models and building out the MEP model.
Mep team 3
This document provides details on the design of a 57 Quayside building by Team 3, including an introduction, data collection on point clouds and city models, architectural, structural and MEP designs, and next steps of clash detection in Navisworks to resolve any clashes in the building models. Floor plans, structural elements, MEP layouts are presented along with thanks from Team 3 members.
NYCHA Bronx River Houses Mathematical Landscapes
My Landscape Mathematics Project proposal for the New York City Housing Authority Bronx River Houses community.
© Yafreisy Carrero. All rights reserved.
Belfast City Centre 3D Modelling
This document summarizes a 3D laser scan survey of two sites in Belfast City Centre for a new student accommodation development. At the first site, a 3D survey was conducted of the surrounding 3 city blocks to capture all adjacent buildings for construction of an accurate 3D model. At the second smaller site, a survey of 1 block was done. A total of 40 scans were taken over 3 days using a Leica Scan Station C10 laser scanner. The scans were combined and exported to modeling software to create 3D polyline window openings for right of light analysis, with the 3D models and window lines delivered within 5 days.
Amiina bakunowicz:GC Pedestrian Bridge
The document summarizes the generative components used to model a bridge and staircase connecting three platforms in a valley in Kazakhstan. Key elements include:
1. Promoting existing lines from a topography model to define the bridge and staircase centerlines.
2. Creating B-spline curves along the contour lines to define the staircase and connecting points to define the bridge.
3. Dividing the staircase curves into steps, connecting points to create railings, and extruding the railings to generate the final modeled structure.
The process demonstrates how generative components can be used to parametrically define and construct a complex modeled structure based on geometric relationships extracted from an existing site topography model.
Matlab automatic detection and reconstruction of building radar footprints f...
The document presents a novel method for automatically detecting and reconstructing building radar footprints from single very high resolution synthetic aperture radar (SAR) images. Unlike most existing methods, the proposed approach can be applied to single images. It extracts low-level features from images and uses a production system to organize them into more structured primitives. It then introduces the concept of semantic meaning to represent the probability that a primitive belongs to a certain scattering class, like double bounce or roof. This semantic meaning helps compensate for the lack of detectable features in single images by allowing selection of the most reliable primitives and footprint hypotheses. The method demonstrates high overall detection rates on a test TerraSAR-X image, reconstructing flat- and g
INTEGRATION OF BIM AND GIS
This document discusses Building Information Modeling (BIM) and its integration with Geographic Information Systems (GIS). BIM allows AEC professionals to efficiently plan, design, construct and manage buildings through an intelligent 3D model. BIM-GIS integration involves combining building data with geospatial data through 7 stages. Current applications in construction include quality, cost, safety and information management. The reconstruction of Notre Dame Cathedral after the 2019 fire utilizes laser scanning to create a detailed 3D point cloud model for planning restoration. Future prospects include monitoring workforces, optimizing waste reduction and integrating BIM models directly into GIS software.
AWS re:Invent 2016: Serverless to 32 XLarge: A Unified Security Approach To A...
Each of the four distinct compute services available from AWS bring unique advantages to your application's design: Amazon EC2, AWS Elastic Beanstalk, Amazon ECS, and AWS Lambda. However, your security responsibilities change with each of these services. For example, with Amazon EC2 and AWS Elastic Beanstalk, you need a plan to lock down the operating system, your applications, and your data. Containers running in Amazon ECS provides additional flexibility and mobility but also introduces new challenges as most security techniques were not designed with containers in mind. AWS Lambda requires a completely new approach to security design at the function level.
Making sure that the diversity available in AWS compute services doesn't increase your operational burden is a significant challenge. But with the right strategy, you can use a unified approach and reduce team impact. In this session, we look at an overall security strategy for AWS compute services pulled from real-world experiences of some top global companies. Strategy in hand, we apply the strategy to each of the available compute services in order to create a unified security view for workloads, regardless of their scale.
Session sponsored by Trend Micro, Inc.
AWS Competency Partner
Recommended
Ck21 presentation team 1
This document outlines the design development of a building project located at 57 Quayaside. It discusses using laser scanning to acquire point cloud data and transfer it to a Revit model. The design development section lists elements like retaining walls, piled foundations, universal columns and beams to support the basement, upper floors, and future mezzanine level. Next steps include clashing the structural and architectural models and building out the MEP model.
Mep team 3
This document provides details on the design of a 57 Quayside building by Team 3, including an introduction, data collection on point clouds and city models, architectural, structural and MEP designs, and next steps of clash detection in Navisworks to resolve any clashes in the building models. Floor plans, structural elements, MEP layouts are presented along with thanks from Team 3 members.
NYCHA Bronx River Houses Mathematical Landscapes
My Landscape Mathematics Project proposal for the New York City Housing Authority Bronx River Houses community.
© Yafreisy Carrero. All rights reserved.
Belfast City Centre 3D Modelling
This document summarizes a 3D laser scan survey of two sites in Belfast City Centre for a new student accommodation development. At the first site, a 3D survey was conducted of the surrounding 3 city blocks to capture all adjacent buildings for construction of an accurate 3D model. At the second smaller site, a survey of 1 block was done. A total of 40 scans were taken over 3 days using a Leica Scan Station C10 laser scanner. The scans were combined and exported to modeling software to create 3D polyline window openings for right of light analysis, with the 3D models and window lines delivered within 5 days.
Amiina bakunowicz:GC Pedestrian Bridge
The document summarizes the generative components used to model a bridge and staircase connecting three platforms in a valley in Kazakhstan. Key elements include:
1. Promoting existing lines from a topography model to define the bridge and staircase centerlines.
2. Creating B-spline curves along the contour lines to define the staircase and connecting points to define the bridge.
3. Dividing the staircase curves into steps, connecting points to create railings, and extruding the railings to generate the final modeled structure.
The process demonstrates how generative components can be used to parametrically define and construct a complex modeled structure based on geometric relationships extracted from an existing site topography model.
Matlab automatic detection and reconstruction of building radar footprints f...
The document presents a novel method for automatically detecting and reconstructing building radar footprints from single very high resolution synthetic aperture radar (SAR) images. Unlike most existing methods, the proposed approach can be applied to single images. It extracts low-level features from images and uses a production system to organize them into more structured primitives. It then introduces the concept of semantic meaning to represent the probability that a primitive belongs to a certain scattering class, like double bounce or roof. This semantic meaning helps compensate for the lack of detectable features in single images by allowing selection of the most reliable primitives and footprint hypotheses. The method demonstrates high overall detection rates on a test TerraSAR-X image, reconstructing flat- and g
INTEGRATION OF BIM AND GIS
This document discusses Building Information Modeling (BIM) and its integration with Geographic Information Systems (GIS). BIM allows AEC professionals to efficiently plan, design, construct and manage buildings through an intelligent 3D model. BIM-GIS integration involves combining building data with geospatial data through 7 stages. Current applications in construction include quality, cost, safety and information management. The reconstruction of Notre Dame Cathedral after the 2019 fire utilizes laser scanning to create a detailed 3D point cloud model for planning restoration. Future prospects include monitoring workforces, optimizing waste reduction and integrating BIM models directly into GIS software.
AWS re:Invent 2016: Serverless to 32 XLarge: A Unified Security Approach To A...
Each of the four distinct compute services available from AWS bring unique advantages to your application's design: Amazon EC2, AWS Elastic Beanstalk, Amazon ECS, and AWS Lambda. However, your security responsibilities change with each of these services. For example, with Amazon EC2 and AWS Elastic Beanstalk, you need a plan to lock down the operating system, your applications, and your data. Containers running in Amazon ECS provides additional flexibility and mobility but also introduces new challenges as most security techniques were not designed with containers in mind. AWS Lambda requires a completely new approach to security design at the function level.
Making sure that the diversity available in AWS compute services doesn't increase your operational burden is a significant challenge. But with the right strategy, you can use a unified approach and reduce team impact. In this session, we look at an overall security strategy for AWS compute services pulled from real-world experiences of some top global companies. Strategy in hand, we apply the strategy to each of the available compute services in order to create a unified security view for workloads, regardless of their scale.
Session sponsored by Trend Micro, Inc.
AWS Competency Partner
Team 2 mep presentation
The document provides information on the design of a new office building tailored for legal firms in Newcastle upon Tyne, England. It includes the site location and constraints, inspiration for the design, laser scanning of the site, architectural plans for each level, and details on the structural, architectural, and MEP (mechanical, electrical, plumbing) models created in Revit. Next steps include clash detection between models in Navisworks and construction animations.
Team 5 mep presentation
The document provides an overview of the design process for a new office building tailored for legal firms in three sentences:
It introduces the project brief to design new office spaces for legal firms and training at a site in Quayside, outlines the data acquisition of a city model and point cloud data of the site, and describes the initial design development phases focusing on architectural and structural concepts.
Process Map(MEP)
The document outlines the services provided by an MEP engineering firm for electrical design. It discusses the key stages of a project from concept to construction. The stages include concept design, scheme design, detail design, tender, and construction. At each stage, more detailed drawings and reports are prepared and the design is further refined. A wide range of electrical services are provided including power distribution, lighting, fire detection, and more.
Mep training
100% job oriented training available in Aghora Design Academy. For More details contact our executive 09388988988 or visit ......................... http://aghoragroup.com
MEP BIM design
The document discusses MEP design processes and the use of BIM. It provides information on:
1) The key phases of MEP design including schematic design, detail design, construction and facility management.
2) How BIM can be utilized across the different phases from requirements management, energy simulations, coordination of models, and use of models in facility management.
3) The benefits of using combined models for coordination between disciplines and for construction.
Godrej MEP Design Consultancy Services
We provide mechanical, electrical, and plumbing (MEP) engineering design services all under one roof. With our technical expertise and multidisciplinary approach to building services design we can bridge the gap between the requirements of the client and efficiency of planning.
Our team is equipped to handle project of all sizes. We have a varied platter of project, from Hospitality, Malls, IT Parks, Commercial Towers, High Rise Residential Towers, Residential Townships, Sports Complex and Mixed use buildings. Our scope included concept, feasibility study, master planning, design services, contract preparation, site visits and implementation up to commissioning.
Types of wires and cables ic
Electrical cables come in many forms and are used to transmit electricity or data. Cables can be made of multiple wires twisted or braided together. Some key types of cables include coaxial cables, which have an inner conductor surrounded by insulating and conducting layers; twisted pair cables, which twist two conductors together to reduce interference; and fiber optic cables, which transmit data using light signals through glass fibers. Cables are used widely in power transmission, electronics, communications, and other applications.
Building Services
The document discusses various building services including HVAC, electrical, plumbing, and fire protection systems. HVAC systems regulate temperature and humidity through heating, cooling, ventilation and air conditioning. Electrical systems include wiring and fire alarms. Plumbing systems distribute water and remove waste. Fire protection involves passive firewalls and active detection/suppression systems like sprinklers.
Introduction to building services part 2
This document discusses various elements that influence building services system design, including moisture, heat, ventilation, lighting, and acoustics. It provides information on each element, such as defining moisture levels, heat transfer sources, ventilation system types, factors that influence lighting brightness, and types of artificial lighting. Various examples and exercises are also included, such as calculating air changes and the number of lights needed in a room.
MEP- Building services
Presentation on MEP Services.
Basic Details about all services inside a building & Civil MEP Coordination for a construction project
Types of wires and cables
presentation releted to all basic of wires and cables. it's very useful to any engineering students .
Electrical wiring BY Jemish
Knowledge of Electrical wiring short and sweet
with pictures for easy understanding and project work.
Building Services Engg. (Electrical installations)
This document discusses the basics of domestic electrical installations. It covers:
- How single-phase 240V power is supplied to homes from the electricity board
- The two common ways power enters a building - underground duct or overhead supply
- How the supply passes through the meter and consumer unit to circuit breakers/fuses
- Typical circuits for lighting, power outlets, and high-load appliances like cookers
- Protection methods like insulation, earthing, and circuit protection devices
- Requirements for busbar systems in high-rise buildings to distribute power safely
- Recommended illuminance levels for different types of tasks and areas.
HOME WIRING(domestic wiring)
This document provides information on basic domestic wiring. It discusses different types of wiring systems like cleat wiring, batten wiring, and conduit wiring. It also describes common wire types used like PVC wire, CTS wire, and weatherproof wire. General wiring rules are outlined that cover aspects like circuit protection, earth wiring, and load balancing. Diagrams of single phase and 3 phase domestic wiring configurations are also included. The document aims to introduce the key concepts and components involved in domestic electrical installations.
Introduction To Building Services
This document provides an introduction to building services and mechanical and electrical systems in buildings. It defines building services as everything inside a building that makes it safe and comfortable, including energy supply, heating/cooling, plumbing, lighting, transportation systems, security, and more. Mechanical and electrical systems are critical to modern buildings, providing features like lighting, temperature control, power, and life safety systems. The document outlines various mechanical systems like HVAC, plumbing, and fire protection, and electrical systems like power, lighting, and special systems. It provides checklists to help determine building requirements and scope M&E systems.
Building Services Electrical (MEP)
Building services engineers are responsible for designing, installing, and monitoring mechanical, electrical, and plumbing systems in modern buildings to ensure safe and comfortable operation. This includes systems like HVAC, electrical power distribution, lighting, plumbing, fire alarms and more. Engineers must consider factors like building codes and regulations, load calculations, transformer and generator sizing when designing these complex building systems. Proper lighting design also requires considering illumination levels, fixture types and lighting controls.
ELECTRICAL WIRING
Electrical wiring is used to carry current and power buildings and structures. There are different types of wiring for domestic, commercial, and industrial use. The choice of wiring depends on factors like durability, safety, appearance, cost, accessibility, and maintenance costs. Common types of wiring include cleat wiring, CTS/batten wiring, metal sheathed wiring, casing and capping, and conduit wiring. Each type has advantages and disadvantages for use depending on the situation. The document also discusses wire specifications and switch types.
Wires & cables
Copper and aluminum are common materials used for electrical conductors. Copper is a better conductor but aluminum is lighter weight and cheaper. Different types of wires include PVC-coated wires, which are durable, long-lasting, and resistant to water, heat, oil and UV light. Conductors with higher resistance, like tungsten and nichrome, are sometimes used to convert electrical energy into heat, light, and sound. The size and type of wire or cable must match the power rating required for safe use, as supplying too much current can cause overheating and damage insulation, potentially resulting in a short circuit.
Building services
A building provides shelter but building services are what make it functional for occupants. Building services include mechanical (HVAC, plumbing), electrical (power, lighting), and operational systems (transportation, automation) that provide a safe, comfortable environment. As architects, it is important to plan and design building services alongside the building structure. Proper allocation of services like HVAC, plumbing, electricity is necessary for floor plans. Building services are key to sustainability and livability of all building types from residential to industrial.
Electrical Wiring Practices and Diagrams
this ppt contains Safety Standards,Wiring Considerations Wire Terminations,Coaxial Cable,Wiring Installations,Wiring Diagrams
vcms_a_global_perspective_short_paper
This document summarizes research on virtual city models (VCMs) from a global perspective. It identifies over 1,000 VCMs worldwide, covering over 83,000 km2 across 80 countries. While research on VCM production and usage has increased since the 1990s, most studies are limited to a single city or country. The document presents an updated global review of VCMs, mapping their locations and finding that Europe has the most (649) while over 1,000 cities have multiple VCMs. It concludes that VCM development is growing rapidly but challenges around online access remain, recommending a crowdsourced approach to maintain comprehensive global data.
Segment_001_of_PMoton-EMT-BIM-uptake
This document discusses the uptake of Building Information Modeling (BIM) and Integrated Project Delivery (IPD) in the UK construction industry and how they are affecting job roles. It provides background on BIM and IPD, noting that while their adoption has increased in the UK, it has still been relatively slow. IPD aims to integrate teams early on to reduce waste and improve efficiency. The document also discusses the role of architectural technologists, which interfaces between design and construction. As the industry shifts towards more collaboration with BIM and IPD, new roles are emerging around areas like BIM coordination and management. The role of architectural technologists is also evolving to take on more collaborative skills and BIM expertise.
More Related Content
Viewers also liked
Team 2 mep presentation
The document provides information on the design of a new office building tailored for legal firms in Newcastle upon Tyne, England. It includes the site location and constraints, inspiration for the design, laser scanning of the site, architectural plans for each level, and details on the structural, architectural, and MEP (mechanical, electrical, plumbing) models created in Revit. Next steps include clash detection between models in Navisworks and construction animations.
Team 5 mep presentation
The document provides an overview of the design process for a new office building tailored for legal firms in three sentences:
It introduces the project brief to design new office spaces for legal firms and training at a site in Quayside, outlines the data acquisition of a city model and point cloud data of the site, and describes the initial design development phases focusing on architectural and structural concepts.
Process Map(MEP)
The document outlines the services provided by an MEP engineering firm for electrical design. It discusses the key stages of a project from concept to construction. The stages include concept design, scheme design, detail design, tender, and construction. At each stage, more detailed drawings and reports are prepared and the design is further refined. A wide range of electrical services are provided including power distribution, lighting, fire detection, and more.
Mep training
100% job oriented training available in Aghora Design Academy. For More details contact our executive 09388988988 or visit ......................... http://aghoragroup.com
MEP BIM design
The document discusses MEP design processes and the use of BIM. It provides information on:
1) The key phases of MEP design including schematic design, detail design, construction and facility management.
2) How BIM can be utilized across the different phases from requirements management, energy simulations, coordination of models, and use of models in facility management.
3) The benefits of using combined models for coordination between disciplines and for construction.
Godrej MEP Design Consultancy Services
We provide mechanical, electrical, and plumbing (MEP) engineering design services all under one roof. With our technical expertise and multidisciplinary approach to building services design we can bridge the gap between the requirements of the client and efficiency of planning.
Our team is equipped to handle project of all sizes. We have a varied platter of project, from Hospitality, Malls, IT Parks, Commercial Towers, High Rise Residential Towers, Residential Townships, Sports Complex and Mixed use buildings. Our scope included concept, feasibility study, master planning, design services, contract preparation, site visits and implementation up to commissioning.
Types of wires and cables ic
Electrical cables come in many forms and are used to transmit electricity or data. Cables can be made of multiple wires twisted or braided together. Some key types of cables include coaxial cables, which have an inner conductor surrounded by insulating and conducting layers; twisted pair cables, which twist two conductors together to reduce interference; and fiber optic cables, which transmit data using light signals through glass fibers. Cables are used widely in power transmission, electronics, communications, and other applications.
Building Services
The document discusses various building services including HVAC, electrical, plumbing, and fire protection systems. HVAC systems regulate temperature and humidity through heating, cooling, ventilation and air conditioning. Electrical systems include wiring and fire alarms. Plumbing systems distribute water and remove waste. Fire protection involves passive firewalls and active detection/suppression systems like sprinklers.
Introduction to building services part 2
This document discusses various elements that influence building services system design, including moisture, heat, ventilation, lighting, and acoustics. It provides information on each element, such as defining moisture levels, heat transfer sources, ventilation system types, factors that influence lighting brightness, and types of artificial lighting. Various examples and exercises are also included, such as calculating air changes and the number of lights needed in a room.
MEP- Building services
Presentation on MEP Services.
Basic Details about all services inside a building & Civil MEP Coordination for a construction project
Types of wires and cables
presentation releted to all basic of wires and cables. it's very useful to any engineering students .
Electrical wiring BY Jemish
Knowledge of Electrical wiring short and sweet
with pictures for easy understanding and project work.
Building Services Engg. (Electrical installations)
This document discusses the basics of domestic electrical installations. It covers:
- How single-phase 240V power is supplied to homes from the electricity board
- The two common ways power enters a building - underground duct or overhead supply
- How the supply passes through the meter and consumer unit to circuit breakers/fuses
- Typical circuits for lighting, power outlets, and high-load appliances like cookers
- Protection methods like insulation, earthing, and circuit protection devices
- Requirements for busbar systems in high-rise buildings to distribute power safely
- Recommended illuminance levels for different types of tasks and areas.
HOME WIRING(domestic wiring)
This document provides information on basic domestic wiring. It discusses different types of wiring systems like cleat wiring, batten wiring, and conduit wiring. It also describes common wire types used like PVC wire, CTS wire, and weatherproof wire. General wiring rules are outlined that cover aspects like circuit protection, earth wiring, and load balancing. Diagrams of single phase and 3 phase domestic wiring configurations are also included. The document aims to introduce the key concepts and components involved in domestic electrical installations.
Introduction To Building Services
This document provides an introduction to building services and mechanical and electrical systems in buildings. It defines building services as everything inside a building that makes it safe and comfortable, including energy supply, heating/cooling, plumbing, lighting, transportation systems, security, and more. Mechanical and electrical systems are critical to modern buildings, providing features like lighting, temperature control, power, and life safety systems. The document outlines various mechanical systems like HVAC, plumbing, and fire protection, and electrical systems like power, lighting, and special systems. It provides checklists to help determine building requirements and scope M&E systems.
Building Services Electrical (MEP)
Building services engineers are responsible for designing, installing, and monitoring mechanical, electrical, and plumbing systems in modern buildings to ensure safe and comfortable operation. This includes systems like HVAC, electrical power distribution, lighting, plumbing, fire alarms and more. Engineers must consider factors like building codes and regulations, load calculations, transformer and generator sizing when designing these complex building systems. Proper lighting design also requires considering illumination levels, fixture types and lighting controls.
ELECTRICAL WIRING
Electrical wiring is used to carry current and power buildings and structures. There are different types of wiring for domestic, commercial, and industrial use. The choice of wiring depends on factors like durability, safety, appearance, cost, accessibility, and maintenance costs. Common types of wiring include cleat wiring, CTS/batten wiring, metal sheathed wiring, casing and capping, and conduit wiring. Each type has advantages and disadvantages for use depending on the situation. The document also discusses wire specifications and switch types.
Wires & cables
Copper and aluminum are common materials used for electrical conductors. Copper is a better conductor but aluminum is lighter weight and cheaper. Different types of wires include PVC-coated wires, which are durable, long-lasting, and resistant to water, heat, oil and UV light. Conductors with higher resistance, like tungsten and nichrome, are sometimes used to convert electrical energy into heat, light, and sound. The size and type of wire or cable must match the power rating required for safe use, as supplying too much current can cause overheating and damage insulation, potentially resulting in a short circuit.
Building services
A building provides shelter but building services are what make it functional for occupants. Building services include mechanical (HVAC, plumbing), electrical (power, lighting), and operational systems (transportation, automation) that provide a safe, comfortable environment. As architects, it is important to plan and design building services alongside the building structure. Proper allocation of services like HVAC, plumbing, electricity is necessary for floor plans. Building services are key to sustainability and livability of all building types from residential to industrial.
Electrical Wiring Practices and Diagrams
this ppt contains Safety Standards,Wiring Considerations Wire Terminations,Coaxial Cable,Wiring Installations,Wiring Diagrams
Viewers also liked (20)
Building Services Engg. (Electrical installations)
Building Services Engg. (Electrical installations)
More from Campus
vcms_a_global_perspective_short_paper
This document summarizes research on virtual city models (VCMs) from a global perspective. It identifies over 1,000 VCMs worldwide, covering over 83,000 km2 across 80 countries. While research on VCM production and usage has increased since the 1990s, most studies are limited to a single city or country. The document presents an updated global review of VCMs, mapping their locations and finding that Europe has the most (649) while over 1,000 cities have multiple VCMs. It concludes that VCM development is growing rapidly but challenges around online access remain, recommending a crowdsourced approach to maintain comprehensive global data.
Segment_001_of_PMoton-EMT-BIM-uptake
This document discusses the uptake of Building Information Modeling (BIM) and Integrated Project Delivery (IPD) in the UK construction industry and how they are affecting job roles. It provides background on BIM and IPD, noting that while their adoption has increased in the UK, it has still been relatively slow. IPD aims to integrate teams early on to reduce waste and improve efficiency. The document also discusses the role of architectural technologists, which interfaces between design and construction. As the industry shifts towards more collaboration with BIM and IPD, new roles are emerging around areas like BIM coordination and management. The role of architectural technologists is also evolving to take on more collaborative skills and BIM expertise.
Virtual City Models Avoidance of Obsolescence
This document provides an overview of research into factors that can cause virtual city models (VCMs) to become obsolete over time and strategies to prevent obsolescence. It discusses how VCMs have been used for applications like emergency response, urban planning, and tourism. However, issues like changing file formats, software/hardware, and user requirements threaten to make VCMs obsolete. The document also establishes a preliminary exploration of these obsolescence factors and prevention strategies to establish a foundation for further study.
Why should I be thinking of BIM - BIM for LA's
This document discusses Building Information Modeling (BIM) and the BIM Campus training program. It provides an overview of BIM Campus, which offers a 12-week BIM training course to teach relevant BIM skills. The training utilizes state-of-the-art hardware and software in a simulated work environment. It aims to develop transferable BIM skills and increase employment prospects for those in the construction industry. The document also briefly discusses virtual city models and challenges common myths about who can benefit from BIM.
BIMCampus presentation - Northumbria University Graduates - Josh, Angus and Rob
Josh Dobson, Angus Donaldson and Robert Eaton present their year out so far to Northumbria University
140117 nu architecture
This document provides an overview of the Campus BIM training program at Northumbria University. It discusses the speaker's background in BIM, describes the 12-week BIM training course that teaches relevant BIM software and workflows. The course is funded through a UK skills agency and delivered using industry-standard hardware and software. Learners gain skills applicable to careers in architecture, engineering, and construction, and the program aims for 100% employment placement upon completion.
Ck21 presentation team 3
This document contains information for the 46 Westgate building project including:
- Site information and adjacent plots
- Building plans from basement to roof level showing room layouts and dimensions
- Structural design details such as foundations, retaining walls, steel columns and beams
- Notes from a CK21 meeting and details on using mega-nodes for construction
- The planned construction process from foundations to secondary structure
- Tasks for the following week including MEP modeling and clash removal
Ck21 presentation team 5
This document provides a design proposal from Team 5 - Angus Donaldson, Karl Jefferson, and Lay Xian Lim - for a new arts building with vertical space exploration. It includes an introduction outlining the design goal, and sections covering the site plan, building elevations, and structural solution utilizing load-bearing concrete walls, piled foundations, universal columns and beams, a steel truss, cross bracing, and reinforced concrete floors.
Ck21 presentation team 4
The document provides details on the proposed design of a new arts building at 46 Westgate Rd Newcastle upon Tyne. It includes a brief overview of the accommodation required, as well as constraints of the brownfield site which is located between two existing buildings. Laser scanning was used to capture point cloud data of the site and surrounding context. The design features a suspended staircase and pitched glazed roof. Plans and elevations show the layout, with the structural design involving displacement piles, steel columns and beams, and in-situ concrete floors.
Ck21 presentation team 2
This document provides information for a structural design team commissioned to design a new arts building. It includes a schedule of accommodation outlining the spaces needed. Physical constraints of the site include existing buildings on both sides and a vacant plot in the rear. Precedent projects are presented. The design process is documented from initial sketches through current design, including spatial development, facade design, and structural build up. Key structural issues addressed include demolition, excavation, site access, safety, and future maintenance.
Ck21 presentation team 1
The document provides design development details for a project located at 46 Westgate Road. It includes sections on site analysis, laser scanning, precedents, design concepts, floor plans for three levels, structural details, and next steps regarding clash detection and producing an MEP model. The project is for Sam Austen and Sofia Moroz and involves the extension of an existing basement and walls.
thinkBIM 2013 pecha kucha
This document summarizes a presentation about Campus, a 12-week Building Information Modeling (BIM) training course in the UK. It is a collaboration between BIM Technologies and Northern Construction Training, and is accredited by City & Guilds. The course teaches BIM software skills through simulated construction projects, and aims to increase employment prospects for young people in the construction industry. It is taught by an Autodesk Certified Professional and is supported by industry input. Past students of the program have had a 100% employment rate following completion.
131121 North East BIM Hub presentation
This document provides information about the North East BIM Hub Campus, which offers a 12-week Building Information Modeling (BIM) training course for those aged 19-24. The course teaches BIM software skills and workflows to help students transition directly into industry jobs. Students learn from an expert instructor using the latest BIM technologies. Industry partners provide input to ensure the training is relevant. Past students have gained employment in BIM roles after completing the course.
Team 4 mep presentation
This document provides an introduction and overview for the proposed design of a new law office building located at 57 Quayside. It includes the following:
1. An introduction that outlines the site location and constraints, as well as precedent designs that are influencing the project.
2. Details about data acquisition for the project, including a site visit and laser scanning to generate point cloud data.
3. An overview of the design development process showing early architectural and structural models.
4. Floor plans for levels 0-3 that demonstrate the proposed layout and functions for the building.
Ck21 presentation team 3
This document discusses the design of a vacant plot called 57 Quayside in Newcastle. It notes the design constraints of the long, narrow site and surrounding listed buildings. 3D laser scanning was used to accurately model neighboring structures in Revit. Early conceptual designs show a 4-story building with atriums to maximize natural light, with public areas on the ground floor and private offices on upper floors. Structural models show a steel frame with bracing and service cores. Revit was used for design development and renders showing interior views and the building facade within the city context.
Ck21 presentation team 2
The document outlines the design of a new office building for legal firms. It includes a schedule of accommodation and constraints of the site location. Laser scanning was used to capture data of the site and surrounding buildings to help model the context in Revit. An architectural model of the building was created with walls, floors, doors and windows. A structural model was also developed including the steel frame, concrete floors and pile foundations. The next steps will be to complete the structural and MEP models and then clash detect them in Navisworks to identify and resolve any issues.
Ck21 presentation team 5
This document provides an overview of the design process for a new office building in Quayside, Newcastle for legal firms and training. It includes a brief introduction to the client's requirements, existing site constraints, data acquisition from a city model and point cloud, and initial design developments exploring architectural precedents and structural approaches. Next steps discussed are developing mechanical, electrical, and plumbing systems and utilizing Navisworks software for integrated modeling review with stakeholders.
01 plus3 arch presentation
Peter James Morton will provide a 12-week training course on Building Information Modeling (BIM) at the Campus training facility. Campus is a collaboration between BIM Technologies and Northern Construction Training that utilizes state-of-the-art hardware and software for BIM learning. The free course for those aged 19-24 will cover BIM software, workflows, and processes to build usable skills for employment in the construction industry.
More from Campus (19)
BIMCampus presentation - Northumbria University Graduates - Josh, Angus and Rob
BIMCampus presentation - Northumbria University Graduates - Josh, Angus and Rob
Recently uploaded
projet de traité négocié à Istanbul (anglais).pdf
Ceci est le projet de traité qui avait été négocié entre Russes et Ukrainiens à Istanbul en mars 2022, avant que les Etats-Unis et la Grande-Bretagne ne détournent Kiev de signer.
Organisations.pdf k[poikdip-jhhohuhejhnjhn
ग्रेटर मुंबई के नगर आयुक्त को एक खुले पत्र में याचिका दायर कर 540 से अधिक मुंबईकरों ने सभी अवैध और अस्थिर होर्डिंग्स, साइनबोर्ड और इलेक्ट्रिक साइनेज को तत्काल हटाने और 13 मई, 2024 की शाम को घाटकोपर में अवैध होर्डिंग के गिरने की विनाशकारी घटना के बाद अपराधियों के खिलाफ सख्त कार्रवाई की मांग की है, जिसमें 17 लोगों की जान चली गई और कई निर्दोष लोग गंभीर रूप से घायल हो गए।
The Rise of Christian Persecution In Islamic Countries (1).pdf
The Rise of Christian Persecution In Islamic Countries (1).pdfECSPE - Saving the Persecuted and Enslaved
Recent years have seen a disturbing rise in violence, discrimination, and intolerance against Christian communities in various Islamic countries. This multifaceted challenge, deeply rooted in historical, social, and political animosities, demands urgent attention. Despite the escalating persecution, substantial support from the Western world remains lacking.
13062024_First India Newspaper Jaipur.pdf
Find Latest India News and Breaking News these days from India on Politics, Business, Entertainment, Technology, Sports, Lifestyle and Coronavirus News in India and the world over that you can't miss. For real time update Visit our social media handle. Read First India NewsPaper in your morning replace. Visit First India.
CLICK:- https://firstindia.co.in/
#First_India_NewsPaper
ACSA confirms operational readiness ahead the arrival of Heads of State at OR...
ACSA says it is ready for the arrival of foreign heads of state ahead of the Presidential Inauguration on Wednesday at OR Tambo International Airport.
bombay-hc-hamare-baraah-film-June-6.pdfde
विवादास्पद फिल्म के ट्रेलर से गाली-गलौज वाले दृश्य हटा दिए गए हैं, और जुर्माना लगाया गया है। सुप्रीम कोर्ट और बॉम्बे हाई कोर्ट दोनों ने फिल्म की रिलीज पर रोक लगा दी है और उसे निलंबित कर दिया है। पहले यह फिल्म 7 जून और फिर 14 जून को रिलीज होने वाली थी, लेकिन अब यह 21 जून को रिलीज हो रही है।
15062024_First India Newspaper Jaipur.pdf
Find Latest India News and Breaking News these days from India on Politics, Business, Entertainment, Technology, Sports, Lifestyle and Coronavirus News in India and the world over that you can't miss. For real time update Visit our social media handle. Read First India NewsPaper in your morning replace. Visit First India.
CLICK:- https://firstindia.co.in/
#First_India_NewsPaper
Reuters Institute Digital News Report 2024
Reuters Institute Digital News Report 2024Reuters Institute for the Study of Journalism, Oxford University
Slide deck with charts from our Digital News Report 2024, the most comprehensive exploration of news consumption habits around the world, based on survey data from more than 95,000 respondents across 47 countries.Federal Authorities Urge Vigilance Amid Bird Flu Outbreak | The Lifesciences ...
Federal Authorities Urge Vigilance Amid Bird Flu Outbreak | The Lifesciences ...The Lifesciences Magazine
Federal authorities have advised the public to remain vigilant but calm in response to the ongoing bird flu outbreak of highly pathogenic avian influenza, commonly known as bird flu.Shark Tank Jargon | Operational Profitability
Don't let fancy business words confuse you! This blog is your cheat sheet to understanding the Shark Tank Jargon. We'll translate all the confusing terms like "valuation" (how much the company is worth) and "royalty" (a fee for using someone's idea). You'll be swimming with the Sharks like a pro in no time!
Snigdha-Sreenath-Minor-v-Travancore-Devaswom-Board-WPCNO-39847-OF-2023-2024-L...
केरल उच्च न्यायालय ने 11 जून, 2024 को मंडला पूजा में भाग लेने की अनुमति मांगने वाली 10 वर्षीय लड़की की रिट याचिका को खारिज कर दिया, जिसमें सर्वोच्च न्यायालय की एक बड़ी पीठ के समक्ष इस मुद्दे की लंबित प्रकृति पर जोर दिया गया। यह आदेश न्यायमूर्ति अनिल के. नरेंद्रन और न्यायमूर्ति हरिशंकर वी. मेनन की खंडपीठ द्वारा पारित किया गया
18062024_First India Newspaper Jaipur.pdf
Find Latest India News and Breaking News these days from India on Politics, Business, Entertainment, Technology, Sports, Lifestyle and Coronavirus News in India and the world over that you can't miss. For real time update Visit our social media handle. Read First India NewsPaper in your morning replace. Visit First India.
CLICK:- https://firstindia.co.in/
#First_India_NewsPaper
一比一原版美国宾夕法尼亚州立大学毕业证如何办理
原版一模一样【微信：741003700 】【美国宾夕法尼亚州立大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理美国宾夕法尼亚州立大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理美国宾夕法尼亚州立大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理美国宾夕法尼亚州立大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理美国宾夕法尼亚州立大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
17062024_First India Newspaper Jaipur.pdf
Find Latest India News and Breaking News these days from India on Politics, Business, Entertainment, Technology, Sports, Lifestyle and Coronavirus News in India and the world over that you can't miss. For real time update Visit our social media handle. Read First India NewsPaper in your morning replace. Visit First India.
CLICK:- https://firstindia.co.in/
#First_India_NewsPaper
Howard Fineman, Veteran Political Journalist and TV Pundit, Dies at 75
Howard Fineman, Veteran Political Journalist and TV Pundit, Dies at 75LUMINATIVE MEDIA/PROJECT COUNSEL MEDIA GROUP
From his beginnings with a daily newspaper, he moved easily through Newsweek magazine to cable news and, later, to the frontiers of online journalism.Bombay-hc-hamare-baraah-order-june-7.pdf
19 जून को बॉम्बे हाई कोर्ट ने विवादित फिल्म ‘हमारे बारह’ को 21 जून को थिएटर में रिलीज करने का रास्ता साफ कर दिया, हालांकि यह सुनिश्चित करने के बाद कि फिल्म निर्माता कुछ आपत्तिजनक अंशों को हटा दें।
A draft Ukraine-Russia treaty from April 2022
A draft Ukraine-Russia treaty from April 2022, published here in full for the first time.
16062024_First India Newspaper Jaipur.pdf
Find Latest India News and Breaking News these days from India on Politics, Business, Entertainment, Technology, Sports, Lifestyle and Coronavirus News in India and the world over that you can't miss. For real time update Visit our social media handle. Read First India NewsPaper in your morning replace. Visit First India.
CLICK:- https://firstindia.co.in/
#First_India_NewsPaper
Recently uploaded (20)
The Rise of Christian Persecution In Islamic Countries (1).pdf
The Rise of Christian Persecution In Islamic Countries (1).pdf
ACSA confirms operational readiness ahead the arrival of Heads of State at OR...
ACSA confirms operational readiness ahead the arrival of Heads of State at OR...
The Impact of Imperial Mode of Living on Migration.pdf
The Impact of Imperial Mode of Living on Migration.pdf
Federal Authorities Urge Vigilance Amid Bird Flu Outbreak | The Lifesciences ...
Federal Authorities Urge Vigilance Amid Bird Flu Outbreak | The Lifesciences ...
Snigdha-Sreenath-Minor-v-Travancore-Devaswom-Board-WPCNO-39847-OF-2023-2024-L...
Snigdha-Sreenath-Minor-v-Travancore-Devaswom-Board-WPCNO-39847-OF-2023-2024-L...
Howard Fineman, Veteran Political Journalist and TV Pundit, Dies at 75
Howard Fineman, Veteran Political Journalist and TV Pundit, Dies at 75
Mep presentation team 1
- 1. 57 QUAYSIDE SOPHIE MCLEAN, GRAHAM EVANS, BISWASH BANIYA
- 7. Point Cloud Data from Laser Scanning to Revit Model
- 14. CK21 Meeting
- 15. CK21 Meeting
- 18. Universal Beams
- 19. Cross Bracing
- 20. Upper Floors
- 21. MEP MODEL
- 23. Ventilation Extract and Supply Duct Work
- 24. Heating
- 25. Lighting
- 26. Floor Void Data and Electrical Cable Trays
- 28. Architectural, Structural and MEP Models in Navisworks Structure V Architecture MEP V Architecture MEP V Structure