MEA provides control systems and actuation solutions across several industrial sectors, including: in refining with FCCU Slide Valves, Coker Switch Valves, Wet Gas Compressors, MOV Gate Valves and Furnace Controls; in utilities with Boiler Fan Damper Actuators, Turbine Steam Emission Valves, Feed Water Control Valves and Turbine Bypass Valves; and in Steel Production with Edge Guide and Center Guide Systems.
Applicable to wide range of installations through commercial and industrial markets, hydronic boilers benefit from application of modern design features to provide high efficiency operation.
Lined Ball Valves Provide Corrosion ProtectionCTi Controltech
Flowserve is the world's leader in the design and manufacture of corrosion resistant fluoropolymer lined valves. Flowserve Atomac valves provide bubble-tight shutoff, low maintenance, no-leak stem seals and the safety assurance of a blowout-proof stem assembly.
Type K Linear and Rotary Damper Actuators - RotorkCTi Controltech
The Type K Range offers rotary and linear pneumatic damper drives for utility power plants, refineries, powerhouse boilers, furnaces and process heaters that require precise combustion air and flue gas handling solutions. The damper drives are available in a wide range of configurations to meet the challenges of industrial applications. Some key features:
- A series offering drop-in-place retrofit, requiring no field engineering or fabrication.
- Improved reliability in high temperature environments
- Rated for 100% duty-cycle, continuous modulating service
- Highly accurate to 0.25% resolution
- Discrete contacts (O/C) and pneumatic, analog or bus network (MOD) communications
Williams & Davis Vertical Tubeless boilers are fully insulated, which results in minimal radiation losses. With a carefully calculated heat-to-steam ratio, operating pressures are achieved quickly and with maximum efficiency.
Victory Energy Firetube Boiler for extreme duty - Frontier SeriesCTi Controltech
By design, the Frontier® Series 3-pass and 4-pass wetback, and now dryback too, boilers are engineered and built for minimum maintenance and maximum output. Wall-to-wall super-structure and rifled tubes ensure years of extreme-duty performance.
Victory Energy utilizes the "latest" burner/control technology available to establish the most dependable operation needed for your specific application.
Flowserve manufactures Automax Valve Automation Systems to provide full service valve and damper automation to the worldwide oil and gas, pulp and paper, chemical, processing and energy related industries.
The Type K Range from Rotork includes rotary and linear pneumatic damper drives for utility power plants, refineries, powerhouse boilers, furnaces and process heaters that require precise combustion air and flue gas handling solutions. Type K damper drives have proven to increase boiler efficiency, reduce maintenance, lower fuel consumption and reduce harmful emissions.
Applicable to wide range of installations through commercial and industrial markets, hydronic boilers benefit from application of modern design features to provide high efficiency operation.
Lined Ball Valves Provide Corrosion ProtectionCTi Controltech
Flowserve is the world's leader in the design and manufacture of corrosion resistant fluoropolymer lined valves. Flowserve Atomac valves provide bubble-tight shutoff, low maintenance, no-leak stem seals and the safety assurance of a blowout-proof stem assembly.
Type K Linear and Rotary Damper Actuators - RotorkCTi Controltech
The Type K Range offers rotary and linear pneumatic damper drives for utility power plants, refineries, powerhouse boilers, furnaces and process heaters that require precise combustion air and flue gas handling solutions. The damper drives are available in a wide range of configurations to meet the challenges of industrial applications. Some key features:
- A series offering drop-in-place retrofit, requiring no field engineering or fabrication.
- Improved reliability in high temperature environments
- Rated for 100% duty-cycle, continuous modulating service
- Highly accurate to 0.25% resolution
- Discrete contacts (O/C) and pneumatic, analog or bus network (MOD) communications
Williams & Davis Vertical Tubeless boilers are fully insulated, which results in minimal radiation losses. With a carefully calculated heat-to-steam ratio, operating pressures are achieved quickly and with maximum efficiency.
Victory Energy Firetube Boiler for extreme duty - Frontier SeriesCTi Controltech
By design, the Frontier® Series 3-pass and 4-pass wetback, and now dryback too, boilers are engineered and built for minimum maintenance and maximum output. Wall-to-wall super-structure and rifled tubes ensure years of extreme-duty performance.
Victory Energy utilizes the "latest" burner/control technology available to establish the most dependable operation needed for your specific application.
Flowserve manufactures Automax Valve Automation Systems to provide full service valve and damper automation to the worldwide oil and gas, pulp and paper, chemical, processing and energy related industries.
The Type K Range from Rotork includes rotary and linear pneumatic damper drives for utility power plants, refineries, powerhouse boilers, furnaces and process heaters that require precise combustion air and flue gas handling solutions. Type K damper drives have proven to increase boiler efficiency, reduce maintenance, lower fuel consumption and reduce harmful emissions.
Trunnion Mount Ball Valve Double Block and Bleed AssemblyCTi Controltech
Double Block and Bleed Valves require two in-line isolation valves and a bleed valve, used to drain or vent trapped fluid between the two closure elements in order to safely isolate safely the downstream pipe. This feature can be achieved with one single valves c/w a bleed port between the obturators.
Hydraulic power units (HPU’s) complement Rotork's extensive offering of rotary and linear actuators. The company has over three decades of experience in their manufacture, with units in service in a variety of plants and pipelines in locations spanning the globe. Although the HPU’s are primarily intended to power hydraulic actuators they are of course suitable for other applications as well. And, in order to provide a complete range of options to best meet the requirements of any application, RFS also has the Skilmatic range of self-contained electro-hydraulic actuators.
Specifically Designed for any industry that must obtain pressure or level transmitter readings on tanks and vessels. Valves are designed to ASME B16.34 and feature minimal dead space, preventing build-up. Purge ports and optional milled flats enable Clean In Place and drainage without process interruption.
Bolt pattern accommodates standard industry ANSI 150# flanged connections and retrofits to knife gate patterns. Hardware configuration allows separate bolting of valve to tank and transmitter to valve as an additional safety measure for hazardous media.
Air Conditioning And Refrigeration (ACR) started with manufacturing of Air Conditioning & Refrigeration compressors (equipment group) and expanded into refrigeration projects.
Projects sub-division undertakes Lump Sum Turn Key (LSTK) Projects which include planning, designing, manufacturing, installing and commissioning of Refrigeration Systems
Rotary and Linear Damper Drives for Control of Combustion Air and Flue GasPower Specialties, Inc.
Combustion air and flue gas damper drives fill a critical role requiring safety, accuracy and reliability above all else. It is critical to deploy the best drive technology to maximize combustion efficiency, minimize emissions and reduce installation costs.
The Williams & Davis Series 2000D is a classic 2-pass, dry-back horizontal firetube boiler that offers high efficiency, flexibility, reliability, safety and ease of operation. The Dryback design provides full access to boiler tubes, tube sheet, and furnace for ease of maintenance and includes single rear tube sheet construction, which reduces tube sheet stresses. Series 2000D provides high flue gas velocities and low stack temperatures to maximize its performance. All units are factory fire tested and shipped as an integrated package, ready for quick connection to utilities.
Type K Rotary Drives for Industrial Applications by Power SpecialtiesPower Specialties, Inc.
The Type K Range offers rotary and linear pneumatic damper drives for utility power plants, refineries, powerhouse boilers, furnaces and process heaters that require precise combustion air and flue gas handling solutions. Type K damper drives have proven to increase boiler efficiency, reduce maintenance, lower fuel consumption and reduce harmful emissions.
Modular self-contained dryer modules incorporate all controls,diagnostics, filtration, and valved connection points to provide easy installation and startup. Combine multiple units to increase capacity and provide redundancy.
Industrial process control, Hytork™ provides a diverse offering of valve actuators. The Excel (XL) Series of Valve Actuator from Hytork™ has so many performance features it is Guaranteed! Designed for the economical actuation of ball, plug and butterfly valves as well as commercial and industrial dampers.
Aluminum rack and pinion actuators to ISO, NAMUR, VDI/VDE standards. Travel stop adjustment in both open and closed directions. The Excel Series of Actuators are available in both double acting and spring return and feature corrosion protection both internally and externally. Torque requirement valves up to 3950 Nm.
Historically electric actuators had never been deemed 'capable' in industrial applications. Not capable as they could not take the ambient temperatures of those application environments, they did not have the speed, they were not 'robust', they did not have the Fail-Safe capability, or if they did have all these attributes the cost was prohibitive. The ILEA series of industrial linear electric actuators overcomes previous weaknesses in electric valve actuators.
Titan brand Suction Diffuser provides pump protection while reducing space, energy, installation, and maintenance requirements. The Suction Diffuser functions as a strainer, preventing foreign materials and harmful particulates from entering the pump inlet. It also employs internal vanes that reduce turbulence to minimize stress and erosion of the pump body and components. The innovative product design allows a single component to replace three in a typical pump installation: elbow, strainer, entry pipe.
(www.compressor-spares-manufacturer.com) We are established manufacturers, exporter, traders and suppliers of Compressor Spares and Tanks. Our offered products are manufactured from optimum grade basic material in strict adherence to the set industry parameters.
Applications oil industry: Wellhead control panels, chemical injection skids, hydraulic control packages, gas compression skids, offshore and onshore. Highly reliable devices utilizing the Custom Control Sensors Dual-Snap® Belleville disc spring principle. Turck® electrical connection for easy “plug and play” in Class I, Division 2 applications. Turck® connector provides superior ingress protection. Hermetically sealed electrical assembly for environmental protection. No electrical junction box required.Rigid, compact and internally adjustable for convenient field set point adjustment. Repeatable and stable set points.
Vibration and shock resistant. High cycle life. High over-pressure capability. Various options for wetted materials and electrical ratings to meet a wide range of application requirements and media compatibility.
Air compressor in Saudi Arabia the lifeline for the manufacturing industry. Kirloskar’s Air Compressor Systems offers a wide range of compressors in 15 product categories. To bring focused attention and create a Centre of Competence specific to technology, these are subdivided into three categories: Reciprocating Compressors, Screw Compressors, and Centrifugal Compressors. KPCL offers Air Compressors from 30 to 10,000 CFM.
KPCL Reciprocating, Horizontal Balanced Opposed and Piston Compressors are the results of extensive engineering expertise and experience of over five decades in design, manufacturing, supply, and installation of air and gas compressors of various designs, capacities, and pressures for a range of applications.
Our compressor range is known for its minimum power consumption, lower operating temperature, and maximum efficiency, thus achieving overall effectiveness. The compressors are manufactured adhering to stringent quality standards and in keeping with different industrial standards as per customer requirements.
Reciprocating Air Compressor Division offers products for a wide range of market segments such as general engineering to critical operation & processing applications in key sectors like Railways and process industries like Refineries & Petrochemical Industries, PET bottling applications etc For more information, please https://3t-saudi.com
Custom Control Sensors, Inc. (CCS) is a global leader in the design,
testing, manufacturing and supply of pressure, temperature and liquid
flow switches for the Industrial, Energy, Aerospace and Defense markets.
Founded in 1958, CCS revolutionized the industrial pressure switch
market by utilizing its patented Dual-Snap® disc spring technology.
The Super High Efficiency Coalescing Filters (SHECF) are designed to remove liquid aerosols from compressed air and gas streams. Located upstream of air dryers, coalescing filters intercept liquid aerosols and coalesce them into larger droplets which are easily removed by gravity.
Kammer valves are designed to handle a wide range of service conditions: pressures from vacuum to 4000 bar and temperatures from minus 269 degrees C to plus 400 degrees C. Body materials include all common stainless steels, in addition to plastics and exotic alloys.
Controls and regula- tors for ideal temperature, pressure and flow control; steam traps for efficient drainage of condensate for maximum heat transfer; flowmeters for precise mea- surement of liquids; liquid drain traps for automatic and continuous drain trap operation to boost system efficiency; rotary filters for increased productivity through proper filtering of fluids; condensate recovery pumps for effective condensate management to save water and sewage costs; stainless steel specialty products for maintaining quality and purity of steam; and a full range of pipeline auxiliaries, all work together to produce a productive steam system. Spirax Sarco’s new line of engineered equipment reduces installation costs with prefabricated assemblies and fabricated modules for system integrity and turnkey advantages.
Desuperheating, sometimes called attemperation or steam conditioning, is the reduction of gas temperature. Its most common application is the reduction of temperature in a steam line through the direct contact and evaporation of water. Most Desuperheaters incorporate the venturi design which uses the velocity of the steam to atomize the cooling water. In addition, Ejector Atomizing Desuperheaters, Attemperator Desuperheaters, Surface Absorption Desuperheaters and Mechanical Atomizing Desuperheater designs are available. In most types, water pressure requirements are the same as the steam line pressure.
The model A650 can power any instrument that operates on 12Vdc @ 160mA or less. Energy is derived from a 40W mono-crystalline waterproof solar panel. The NEMA 4 enclosure includes a battery charge controller and lead acid battery. Mounting brackets up to 4 inches square or round are available. Options include DIN rail and external antenna connection, YAGI antennas. Ideal for Analynk wireless products or any remote applications that does not have power available.
Trunnion Mount Ball Valve Double Block and Bleed AssemblyCTi Controltech
Double Block and Bleed Valves require two in-line isolation valves and a bleed valve, used to drain or vent trapped fluid between the two closure elements in order to safely isolate safely the downstream pipe. This feature can be achieved with one single valves c/w a bleed port between the obturators.
Hydraulic power units (HPU’s) complement Rotork's extensive offering of rotary and linear actuators. The company has over three decades of experience in their manufacture, with units in service in a variety of plants and pipelines in locations spanning the globe. Although the HPU’s are primarily intended to power hydraulic actuators they are of course suitable for other applications as well. And, in order to provide a complete range of options to best meet the requirements of any application, RFS also has the Skilmatic range of self-contained electro-hydraulic actuators.
Specifically Designed for any industry that must obtain pressure or level transmitter readings on tanks and vessels. Valves are designed to ASME B16.34 and feature minimal dead space, preventing build-up. Purge ports and optional milled flats enable Clean In Place and drainage without process interruption.
Bolt pattern accommodates standard industry ANSI 150# flanged connections and retrofits to knife gate patterns. Hardware configuration allows separate bolting of valve to tank and transmitter to valve as an additional safety measure for hazardous media.
Air Conditioning And Refrigeration (ACR) started with manufacturing of Air Conditioning & Refrigeration compressors (equipment group) and expanded into refrigeration projects.
Projects sub-division undertakes Lump Sum Turn Key (LSTK) Projects which include planning, designing, manufacturing, installing and commissioning of Refrigeration Systems
Rotary and Linear Damper Drives for Control of Combustion Air and Flue GasPower Specialties, Inc.
Combustion air and flue gas damper drives fill a critical role requiring safety, accuracy and reliability above all else. It is critical to deploy the best drive technology to maximize combustion efficiency, minimize emissions and reduce installation costs.
The Williams & Davis Series 2000D is a classic 2-pass, dry-back horizontal firetube boiler that offers high efficiency, flexibility, reliability, safety and ease of operation. The Dryback design provides full access to boiler tubes, tube sheet, and furnace for ease of maintenance and includes single rear tube sheet construction, which reduces tube sheet stresses. Series 2000D provides high flue gas velocities and low stack temperatures to maximize its performance. All units are factory fire tested and shipped as an integrated package, ready for quick connection to utilities.
Type K Rotary Drives for Industrial Applications by Power SpecialtiesPower Specialties, Inc.
The Type K Range offers rotary and linear pneumatic damper drives for utility power plants, refineries, powerhouse boilers, furnaces and process heaters that require precise combustion air and flue gas handling solutions. Type K damper drives have proven to increase boiler efficiency, reduce maintenance, lower fuel consumption and reduce harmful emissions.
Modular self-contained dryer modules incorporate all controls,diagnostics, filtration, and valved connection points to provide easy installation and startup. Combine multiple units to increase capacity and provide redundancy.
Industrial process control, Hytork™ provides a diverse offering of valve actuators. The Excel (XL) Series of Valve Actuator from Hytork™ has so many performance features it is Guaranteed! Designed for the economical actuation of ball, plug and butterfly valves as well as commercial and industrial dampers.
Aluminum rack and pinion actuators to ISO, NAMUR, VDI/VDE standards. Travel stop adjustment in both open and closed directions. The Excel Series of Actuators are available in both double acting and spring return and feature corrosion protection both internally and externally. Torque requirement valves up to 3950 Nm.
Historically electric actuators had never been deemed 'capable' in industrial applications. Not capable as they could not take the ambient temperatures of those application environments, they did not have the speed, they were not 'robust', they did not have the Fail-Safe capability, or if they did have all these attributes the cost was prohibitive. The ILEA series of industrial linear electric actuators overcomes previous weaknesses in electric valve actuators.
Titan brand Suction Diffuser provides pump protection while reducing space, energy, installation, and maintenance requirements. The Suction Diffuser functions as a strainer, preventing foreign materials and harmful particulates from entering the pump inlet. It also employs internal vanes that reduce turbulence to minimize stress and erosion of the pump body and components. The innovative product design allows a single component to replace three in a typical pump installation: elbow, strainer, entry pipe.
(www.compressor-spares-manufacturer.com) We are established manufacturers, exporter, traders and suppliers of Compressor Spares and Tanks. Our offered products are manufactured from optimum grade basic material in strict adherence to the set industry parameters.
Applications oil industry: Wellhead control panels, chemical injection skids, hydraulic control packages, gas compression skids, offshore and onshore. Highly reliable devices utilizing the Custom Control Sensors Dual-Snap® Belleville disc spring principle. Turck® electrical connection for easy “plug and play” in Class I, Division 2 applications. Turck® connector provides superior ingress protection. Hermetically sealed electrical assembly for environmental protection. No electrical junction box required.Rigid, compact and internally adjustable for convenient field set point adjustment. Repeatable and stable set points.
Vibration and shock resistant. High cycle life. High over-pressure capability. Various options for wetted materials and electrical ratings to meet a wide range of application requirements and media compatibility.
Air compressor in Saudi Arabia the lifeline for the manufacturing industry. Kirloskar’s Air Compressor Systems offers a wide range of compressors in 15 product categories. To bring focused attention and create a Centre of Competence specific to technology, these are subdivided into three categories: Reciprocating Compressors, Screw Compressors, and Centrifugal Compressors. KPCL offers Air Compressors from 30 to 10,000 CFM.
KPCL Reciprocating, Horizontal Balanced Opposed and Piston Compressors are the results of extensive engineering expertise and experience of over five decades in design, manufacturing, supply, and installation of air and gas compressors of various designs, capacities, and pressures for a range of applications.
Our compressor range is known for its minimum power consumption, lower operating temperature, and maximum efficiency, thus achieving overall effectiveness. The compressors are manufactured adhering to stringent quality standards and in keeping with different industrial standards as per customer requirements.
Reciprocating Air Compressor Division offers products for a wide range of market segments such as general engineering to critical operation & processing applications in key sectors like Railways and process industries like Refineries & Petrochemical Industries, PET bottling applications etc For more information, please https://3t-saudi.com
Custom Control Sensors, Inc. (CCS) is a global leader in the design,
testing, manufacturing and supply of pressure, temperature and liquid
flow switches for the Industrial, Energy, Aerospace and Defense markets.
Founded in 1958, CCS revolutionized the industrial pressure switch
market by utilizing its patented Dual-Snap® disc spring technology.
The Super High Efficiency Coalescing Filters (SHECF) are designed to remove liquid aerosols from compressed air and gas streams. Located upstream of air dryers, coalescing filters intercept liquid aerosols and coalesce them into larger droplets which are easily removed by gravity.
Kammer valves are designed to handle a wide range of service conditions: pressures from vacuum to 4000 bar and temperatures from minus 269 degrees C to plus 400 degrees C. Body materials include all common stainless steels, in addition to plastics and exotic alloys.
Controls and regula- tors for ideal temperature, pressure and flow control; steam traps for efficient drainage of condensate for maximum heat transfer; flowmeters for precise mea- surement of liquids; liquid drain traps for automatic and continuous drain trap operation to boost system efficiency; rotary filters for increased productivity through proper filtering of fluids; condensate recovery pumps for effective condensate management to save water and sewage costs; stainless steel specialty products for maintaining quality and purity of steam; and a full range of pipeline auxiliaries, all work together to produce a productive steam system. Spirax Sarco’s new line of engineered equipment reduces installation costs with prefabricated assemblies and fabricated modules for system integrity and turnkey advantages.
Desuperheating, sometimes called attemperation or steam conditioning, is the reduction of gas temperature. Its most common application is the reduction of temperature in a steam line through the direct contact and evaporation of water. Most Desuperheaters incorporate the venturi design which uses the velocity of the steam to atomize the cooling water. In addition, Ejector Atomizing Desuperheaters, Attemperator Desuperheaters, Surface Absorption Desuperheaters and Mechanical Atomizing Desuperheater designs are available. In most types, water pressure requirements are the same as the steam line pressure.
The model A650 can power any instrument that operates on 12Vdc @ 160mA or less. Energy is derived from a 40W mono-crystalline waterproof solar panel. The NEMA 4 enclosure includes a battery charge controller and lead acid battery. Mounting brackets up to 4 inches square or round are available. Options include DIN rail and external antenna connection, YAGI antennas. Ideal for Analynk wireless products or any remote applications that does not have power available.
The Air Process heater will provide hot air and gas up to 1000 degree Fahrenheit (540 C) with infinite control by varying the voltage and air velocity supplied. Units are fitted with a tubing "T" for convenient power lead outlet, while larger diameters can be supplied with post terminals on the sheath for direct electrical connections.
Fundamental analysis and How to Use it in Forex TradingKeith Weber
The success of a Forex trader depends on many aspects. Among them is the ability to comprehensively see the situation in the financial market. Fundamental analysis is one of the main types of market’s analysis. It represents a deep study of the political and financial situation in some important countries.
The financial situation of every country forms the rates of the national currency. Traders who trade according to the fundamental analysis must always be aware of political situation of the world major countries. A trader is getting familiar with the economical or political situation in the certain countries. After that he or she concludes whether there is a potential for a national currency to go up or down. Basing on this conclusion, a trader makes a trading decision for buy or sell. This is how the fundamental analysis works.
Join our free trading e-course: InvestmentProfits.net
Buổi đào tạo được tổ chức bởi ESC Việt Nam tại HN vào ngày 26/10/2016 dưới sự dẫn dắt của anh Nguyễn Mạnh Linh - Chuyên viên tổ chức sự kiện công ty Vietnam Esports.
The Water & Wastewater and Building Automation industries are two key ingredients in our everyday lives and yet so often go unnoticed. In fact, the only time most people become aware of them is when a problem arises somewhere along the line. VACON® 100 Flow is designed to ensure pump and fan solutions control air- and waterflow quietly and effectively.
As more and more Data Centers transition to water systems as the most efficient method of cooling, 4,000 times more efficient than air, owners and engineers demand only the most reliable piping systems are used in their facilities.
Whether cooling, heating or protecting your data center facility, Victaulic has the products and solutions to get your data center up and running quickly and operating efficiently.
Bản vẽ thiết kế mô tả chi tiết Bộ truyền động điện đa vòng cho tự động hóa các van công nghiệp và đặc biệt với yêu cầu mô men xoắn đến 120.000
>>>Xem thêm tại: http://vancuaphai.com/dong-co-auma.htm
This brochure intends to describe functions and possible applications for electric actuators, actuator controls and gearboxes. The document offers an introduction into the topic, an overview on products and founded explanations regarding design and function of electric AUMA actuators. On the rear pages of this brochure, you will find a chapter with detailed technical data
for swift product selection. For device selection, further information can be obtained from our separate product specific data sheets.
Fittings & Valves For Instrumentation, Hydraulic & Pneumatic ApplicationsVishakhaTalmale
We are the leading hydraulic fittings manufacturers in India. SEALEXCEL’s total quality management and culture associated with Design, Research & Development, world class production. ensure high quality and zero defect products. #fitting hydraulic #hydraulic couplings #hydraulic fittings manufacturers in india
https://www.sealexcel.com/hydraulic-fittings/
Industries like chemical, power, metalworking and oil & gas have all been having an increasing demand for innovative valves that meet the sectors’ requirements. In order to fulfill these demands, the valve production sector needs to substantially lower the costs of fabrication and the development time, while keeping up with the industrial innovations. And to help you in that course, here are the valve design trends that shouldn’t be missed.
To know more : http://valvulasfevisa.com/
Porque elegir Pistones Electricos en ves de HidraulicosDaniel Filimonczuk
Con menos elementos asociados, el uso de actuadores o pistones electricos es la mejor opcion para reducir costos de implementacion y mantenimiento. Consultenos.
Flowserve Valve, Actuation and Instrumentation PortfolioCTi Controltech
The Flowserve valve, actuation and instrumentation portfolio includes world-class quarter-turn, rotary, linear, control and special configuration valves. Additionally, Flowserve also offers precision actuation and instrumentation for every application, from remotely controlled, fully automated electric, hydraulic and pneumatic actuators to electronic positioners and level switches.
Check-All Valve manufactures in-line spring-loaded poppet-type check valves, vacuum breakers, and low pressure relief devices. All valves are available with metal to metal or soft seats. Sizes range from 1/8” NPT to 20 inch flanged connections. Pressure ratings are available from full vacuum to 10,000 psi. Special materials available are Titanium, Alloy C-276, alloy 20 and many others. Fluoropolymer (FEP) encapsulated springs are available for special corrosion applications.
The SANITRX HPX & SANITRX HPX II Rupture Discs can be used in a wide range of sanitary and hygienic applications throughout pharmaceutical, biotech, food, and beverage facilities. SANITRX HPX & SANITRX HPX II Rupture Discs are semicircular scored reverse acting rupture discs designed specifically for the pharmaceutical, biotech, food and beverage industries. These rupture discs are available to fit between industry standard sanitary ferrules, NA-CONNECT® flanges or SANITRX fittings.
Continental Disc Corporation is a leading manufacturer of rupture disc (bursting disc) devices for a variety of process industries, including chemical, petrochemical, petroleum refining, pharmaceutical, beverage, food and dairy, aerospace, gases, electronics, and other markets worldwide.
In-line spring-loaded, piston-type check valves. All valves are available with metal to metal or soft seats. Sizes range from 1/8” NPT to 20 inch flanged connections. Pressure ratings are available from full vacuum to 10,000 psi. Special materials available are Titanium, Alloy C-276, alloy 20 and many others.
Specifically Designed for Pharmaceutical, Biotech, Food, Beverage, Consumer Products and other Sanitary and Clean Steam Processes
Unique Adjust-O-Seal® design provides upstream sealing and in-line adjustment for seat wear
Longer life
True-Bore® (valve bore same as connecting tubing or pipe)
Pad radius facilitates efficient drainage and reduces the pocket area above the ball.
Available in API-607 Fire Tested design
Optional Purge port and milled ball flats allow inline CIP to prevent clogging and plug formation
Available in Angle Stem versions for applications where automation may interfere with tank head or jacket.
Combining Rupture Discs and Safety Relief ValvesCTi Controltech
Isolating a relief or safety valve from the process media through the installation of a rupture disc upstream of the valve inlet will eliminate exposure of the costly valve to effects of the media.
Deflagration Flame Arresters are fire safety devices used to protect stored or process media from deflagrations. A deflagration flame arrester can be used on the top of a tank in certain conditions, as an in-line safety device where combustible gases are transported through low pressure pipe lines.
Flowserve, under their Valtek brand, developed a control valve that combines a number of useful design features. The MaxFlo 4 is an eccentric rotary plug valve intended for fluid control operations. The valve has some attractive design features.
Atomac valves provide bubble-tight shutoff, low maintenance, no-leak stem seals and the safety assurance of a blowout-proof stem assembly. LIned ball valves deliver high levels of corrosion resistance.
Groth Corporation's Pressure/Vacuum Relief Valves, Pressure Relief Valves, Vacuum Relief Valves, Pilot Operated Valves, Flame and Detonation Arresters, Emergency Relief Valves, Waste Gas Burners, Pressure Regulators and more have been protecting refineries, chemical processing plants and facilities with atmospheric, fixed-roof storage tanks for more than 50 years.
Rupture Disc Products For Industrial Process SafetyCTi Controltech
Built on years of research and development, the HPX® and SANITRX HPX® Rupture Discs (bursting discs) are high precision pressure relieving devices that protect personnel, equipment and the environment. The versatility of the HPX® product family offers pressure protection for a wide range of applications in many processing industries, including: chemical, oil and gas, food, beverage, pharmaceutical, biotech, pulp and paper, power and more.
Flame control products for industrial fluid operationsCTi Controltech
Groth Corporation's Pressure/Vacuum Relief Valves, Pressure Relief Valves, Vacuum Relief Valves, Pilot Operated Valves, Flame and Detonation Arresters, Emergency Relief Valves, Waste Gas Burners, Pressure Regulators and more have been protecting refineries, chemical processing plants and facilities with atmospheric, fixed-roof storage tanks for more than 50 years.
CMA range modulating actuators deliver a series of sizes suitable for linear, quarter-turn and rotary control valve and pump applications requiring precise position control and continuous modulation.
The Rotork CMA Range provides for simple, safe and easy set-up via an internal electronic 6-segment LCD display and push button configuration.
Kammer valves are designed to handle a wide range of service conditions: pressures from vacuum to 6000 psi and temperatures from minus 500° F to plus 752° F. Body materials include all common stainless steels, in addition to plastics and exotic alloys. Kammer valves are also applicable in applications that require zero stem leakage. When equipped with bellows seals, Kammer valves reliably eliminate the threat of fugitive emissions or toxic/corrosive leakage.
Electric Control Valve Actuators for Industrial Process ApplicationsCTi Controltech
The Rotork CVA line of electric process control actuators offers a highly accurate and responsive method of automating control valves, without the complexity and cost of a pneumatic supply. With an increased focus on production costs and efficiency, accurate control of product through the pipeline is paramount. With resolution figures better than 0.1% and the ability to eliminate position overshoot, the Rotork CVA models help to maximize product quality and plant capacity.
Electronic Line Break Protector for Fluid SystemsCTi Controltech
Rotork’s ELB (Electronic Line Break) is a robust self-contained electronic pipeline monitoring system designed for use in the gas & oil industry. It will continuously monitor pipeline pressure dynamics to provide early detection of pipeline breaks and initiate automatic valve actuator movement to an emergency position based upon user-defined parameters. The powerful and versatile system can also collect detailed operational data useful for optimising performance and enhancing pipeline safety.
Integrated Flame Scanner For Commercial and Industrial Combustion OperationsCTi Controltech
Fireye® provides a variety of flame scanners which accurately detect the presence or absence of flame in a combustion chamber. Scanners include advanced sensors and algorithms that can discriminate a target burner from adjacent flames in the same combustion chamber. Scanners can be used with all fuel types and burner configurations. InSight Scanners® and Phoenix families are integrated designs which include all the appropriate detection and amplification circuity in one compact unit.
Controlling Cavitation in Industrial Control ValvesCTi Controltech
Cavitation, in process control valves, refers to the formation of vapor spaces or bubbles within the valve cavity resulting from a rapid drop in pressure as liquid passes through the valve. When the bubbles transit to an area of higher pressure, the higher pressure causes the bubbles to implode, producing shockwaves which propagate through the liquid. These shockwaves can cause metal fatigue and excessive wear on the internals of the valve. The collapsing bubbles also make a discernible sound with accompanying vibration.
Seven recommendations for bolstering industrial control system cyber securityCTi Controltech
Recommendations from ICS-CERT, the Industrial Control System Cyber Emergency Response Team, a division of Department of Homeland Security. Seven basic steps to follow that will substantially boost cyber security and generate awareness of the threat potential
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
CW RADAR, FMCW RADAR, FMCW ALTIMETER, AND THEIR PARAMETERSveerababupersonal22
It consists of cw radar and fmcw radar ,range measurement,if amplifier and fmcw altimeterThe CW radar operates using continuous wave transmission, while the FMCW radar employs frequency-modulated continuous wave technology. Range measurement is a crucial aspect of radar systems, providing information about the distance to a target. The IF amplifier plays a key role in signal processing, amplifying intermediate frequency signals for further analysis. The FMCW altimeter utilizes frequency-modulated continuous wave technology to accurately measure altitude above a reference point.
HEAP SORT ILLUSTRATED WITH HEAPIFY, BUILD HEAP FOR DYNAMIC ARRAYS.
Heap sort is a comparison-based sorting technique based on Binary Heap data structure. It is similar to the selection sort where we first find the minimum element and place the minimum element at the beginning. Repeat the same process for the remaining elements.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
1. 2600 American Lane • Elk Grove Village, IL 60007 USA
800.523.5491 • 847.766.9040 (in Illinois) • Fax: 847.350.1951
contact@meaincorporated.com • www.meaincorporated.com
MEA INC
5. For almost half a century, MEA
has been providing proven and
reliable solutions for critical
processes throughout the world.
6. Founded in 1963, MEA has been the industry leader in the design and manufacture of Actuators needed to safeguard
critical flow processes such as FCCU (Fluid Catalytic Cracking Unit) Slide Valves, Coker Switch Valves, Boiler and Furnace
Damper Drives, Butterfly Valves, Plug Valves, Blower and Compressor Surge Controls, Wet Gas Compressor Controls and
oil flow control valves. Our latest systems effectively eliminate unplanned shut downs by providing digitally controlled
redundant actuators with 100% reliability and continuous control over your processes. MEA systems integrate easily into
your existing network and provide multiple levels of security and diagnostics.
Welcome to MEA
02COMPLETE CONTROL
7. COMPLETE CONTROL
MEA was founded in 1963 by Mr. Thaddeus Lasiewicz. Over dinner one night, a friend in the Steel Industry explained a
problem he was having maintaining efficiency in his blast furnace. What began as a sketch on a napkin has resulted in
almost 50 years of effective problem solving for customers in the utility, refining and steel industries.
03 COMPLETE CONTROL
Early Days
HISTORY
8. COMPLETE CONTROL 04
2000 -2010
TODAY
1990 -2000
1980 -1990
1970 -1980
1963 -1970
MEA develops a “Super Thrust” Electro-Hydraulic Modulating Actuator followed by similar models for Nuclear and
Pipeline applications. MEA designs Center and Edge Guides for the Steel Industry based on laser technology. In
conjunction with UOP, MEA develops the first high speed, high accuracy Electro-Hydraulic self-contained actuator
- the precursor to the Eagle System.
MEA Founded by T.W. Lasiewicz as a consulting company to the steel industry. MEA designed its first actuator in
1966 for gas boiler pressure controls and embedded 8 men as service contractors to Interlake Steel.
MEA develops Electro-Hydraulic, modulating actuators for Ortho Flow Plug Valves and designs a “Super Thrust”
modulating Low Pressure Actuator. MEA enters into a joint partnership with Kubota Valves.
MEA designs and builds the first Dual “Super Thrust” Actuator, the first “Super Thrust” Digital Steam Turbine
Control and the first “Super Thrust” Nuclear Damper Actuator. MEA revolutionizes Wilson Snyder Coker Switch
Valve Actuation with the first Phoenix model and introduces the first Redundant Analog Controller.
MEA is Awarded ISO 9001:2000 Certification. MEA designs the first Redundant Digital Controller. Improvements
and upgrades carry digital controls into the third Generation - the present Eagle System.
With the retirement of founder T.W. Lasiewicz, MEA moves forward under the new leadership of President Jack
Mueller who says, “Our current new customers can expect that MEA will continue to be the innovative company
it has always been. With Service and Support as our cornerstone, the next half century will be more exciting than
the first.”
The First 48 Years
HISTORY
9. COMPLETE CONTROL
05
Locations
“Whatever our plant needs may be - technical advice, training, spare parts, planned maintenance or emergency repairs - MEA has always come through for
us. Their technicians consistently perform above and beyond expectations, minimizing down time and maximizing reliability. When any type of issues arise
concerning our slide valve actuators, MEA is the first call I make.”
Brian Hendrickson, Instrumentation Supervisor ConocoPhillips Trainer Refinery
“ We have had many years experience with MEA and their installed equipment. They have always responded in a professional manner within
their engineering and design team, followed by their jewel in the crown of field installation and support service engineers. It has been a
pleasure to do business with MEA and a comfort to know they are ready and willing to respond to any issue we have thrown at them. Even
though we have had the Big Pond between us, we have still managed excellent communication and support. Keep up the good work.”
B.W.R. Jones, Senior I/E Project Engineer, Chevron Ltd., Pembroke Refinery
MEA HEADQUARTERS
INSTALLATIONS
LOCATIONS
Client Testimonials
10. 06
Industry Types
MEA provides control systems and actuation solutions across several industrial sectors, including: in refining with FCCU Slide Valves, Coker Switch
Valves, Wet Gas Compressors, MOV Gate Valves and Furnace Controls; in utilities with Boiler Fan Damper Actuators, Turbine Steam Emission
Valves, Feed Water Control Valves and Turbine Bypass Valves; and in Steel Production with Edge Guide and Center Guide Systems.
Oil Refinery Power Steel Pipe Line
MARKETS
COMPLETE CONTROL
11. Phoenix
Named after the mythical bird with a life span of 500 to 1000 years, the MEA Phoenix revolutionized the coker deheading process for
the durable Wilson-Snyder Coker Switch Valve.
Hawk
Hawks are widely reputed to be the most intelligent birds based on the efficiency of their hunting habits. The MEA Hawk’s efficiency
comes from its keen, state-of-the-art, reliable linear control of dampers and valves.
Eagle
Eagles differ from other birds of prey in their larger size, powerful builds and precise eyesight. Like its namesake, the MEA Eagle offers
unmatched power and precision when actuating valves in critical processes.
PRODUCTS
Brands
COMPLETE CONTROL
07
12. Automated Safety
Phoenix
The MEA Phoenix provides complete automation for Wilson Snyder Switch
Valves. Because the coke drum feed switch valve process is now automated,
operators can now complete delayed coking operations accurately and with
the “push of a button.” This results in a dramatic improvement in safety and
operator moral.
Although initial investments may be higher with Wilson Snyder valves, their
longevity, durability and simplicity result in drastic savings over the life of
the valve. As they do not need steam in the operational process, there is also
the added eco-benefit.
PRODUCTS
08COMPLETE CONTROL
13. 09 COMPLETE CONTROL
The MEA Hawk is an electro-hydraulic Actuator for dampers, globe valves,
butterfly valves, plug valves and pipeline applications. Offering effective,
state-of-the-art, reliable linear control of dampers and valves, it also provides
high-thrust accuracy, a 100% duty cycle, manual control and fail-safe
actuation for valves and other equipment.
It can be a replacement actuator for ITT General Hydromotor delivering
4,000 lbs. of thrust, an adjustable stroke of 4” maximum, an adjustable spring
close or spring open, and modulating or on/off. It features a simple design
and requires virtually no maintenance. Hydraulic controls are machined
in one manifold. Each Hawk model meets UL, CSA/CUL and NEMA 4X
standards and Class I, Division 1 Hazardous Locations (Explosion Proof). The
Hawk can also be designed to meet ATEX standards as specified.
Accurate Precision
* images are not to scale
PRODUCTS
Hawk
14. 10COMPLETE CONTROL
Reliable Redundancy
The MEA Eagle Hydraulic Power Unit and Actuator were developed by
MEA for FCCU (Fluid Catalytic Cracking Unit) slide valve applications in oil
refineries. First introduced in the field in 1979 as an analog system, they now
come with fully digital controls providing precise position to a resolution of
1/1000th of an inch.
When fully networked with your DCS, operation can take place remotely
while self-diagnostics and predictive maintenance can communicate a
potential problem before it even occurs. With optional redundant controls,
a secondary control system will seamlessly take over in the event of a failure
assuring that your process continues uninterrupted while maintenance
takes place. This 100% always-on reliability can eliminate unplanned shut
downs all together.
PRODUCTS
Eagle
15. COMPLETE CONTROL
11
Redundant Servo Control System
Engineered for precise directional flow control
which gives you constant command of the
valve position.
Double Filter Manifold Design
Allows for the changing of filters without
interruption of service. Three (3) micron
filtration eliminates contamination from
hydraulic circuitry.
Testable and Redundant
Emergency Shut Down System
Allows you to verify your emergency shutdown
function (meeting OSHA 29 CFR, Part 10
regulations). Testing emergency shutdown
function will not interfere with the operation of
your valve or the critical process it controls.
Externally Mounted Mouse
Allows access to screen controls without
opening the control enclosure thereby
maintaining the integrity of your area
classification.
FEATURES
Eagle
16. 12
Fail-safe is accomplished through the use of redundant controls and Quality Assured
Manufacturing. MEA designs include two separate control nodes, each capable of
complete, independent control. Each node monitors the other as well as its individual
control loop components. In the event of a failure, MEA software senses the problem
and automatically initiates a seamless switchover to the alternate node avoiding
interruptions.
MEA has achieved ISO 9001:2008 certification. In order to control quality, component
standardization and field inventory demands, MEA manufactures all critical components
in our Chicago plant. These exacting manufacturing standards allow MEA to accurately
control all hydraulic, mechanical and electronic systems. No detail is overlooked. The
MEA Eagle meets or exceeds all process performance standards and codes including
Hazardous Area and Location Classifications. Conversion to digital control (including
the replacement of analog parts) can be done on-line or during your next turnaround.
Adapting your slide valves, butterfly valves, plug valves or existing valve actuators is easy
and economical.
FEATURES
COMPLETE CONTROL
17. COMPLETE CONTROL
13
Identifying a need and then developing a creative solution is an MEA hallmark. Our
capability includes a full force engineering and manufacturing team to work with you
throughout the design phase, installation, startup and maintenance.
MEA’s commitment to quality and service includes support throughout the entire
product lifecycle. Our ISO 9001:2008 certification is evidence of our commitment to
our customers in developing and maintaining a quality product. Leveraging expertise
in product manufacturing by being a lean manufacturing facility. MEA continuously
enhances product design, improves product quality and reliability while reducing
product cost and shortening time to manufacture. This is particularly important when
our customers require critical spare parts necessary for their process efficiency.
• Multi-million dollar state-of-the-art software, testing and manufacturing
equipment.
• Working arrangements with other manufacturers and distributors throughout the
world to assure you of smooth and uninterrupted service.
• Computer controlled inventory to get you the parts you need expeditiously.
• Quality control and inspection system that assures we meet your specifications
exactly from the initial design phase through final installation.
Our manufacturing practice includes:
Manufacturing
ENGINEERING
18. 14
Our Engineering Team has worked on numerous projects worldwide. The experience and expertise of our engineers allows us to meet the
diverse requirements of our customers, however complex, typical, or process based they might be. We can meet your application specifications
by providing full turnkey product design. We offer complete engineering design capabilities involving multiple engineering disciplines and
an ISO certified product development process. We can satisfy your complete product development needs starting with a product concept
and finishing with a ready-to-manufacture product design. During project development, we can provide requirement analysis, architecture
development, mechanical design, electrical design, software design, verification and validation testing, and other product development
capabilities.
Production
ENGINEERING
COMPLETE CONTROL
19. COMPLETE CONTROL
15
We understand that MEA equipment is used in critical and continuous processes in which problems can cause serious human or financial consequences.
That is why at MEA we have prioritized our ability to respond to our customers whenever they need assistance. With our after hours call center, customers
can be routed 24 hours a day directly to an MEA engineer who can assist in troubleshooting or if need be, schedule emergency service. More proactively,
we offer comprehensive training programs which can be done at MEA headquarters, on installed equipment or on demonstration units which can be
brought to our customers training facilities. MEA also offers a Proactive Preventative Maintenance Plan to help assure your processes are always running
at optimal conditions. MEA works to help you avoid problems that lead to profit loss, safety issues and unnecessary shut downs. As always, genuine MEA
parts and service come guaranteed.
SUPPORT
Accurate PrecisionPriority Support
Field Service
20. Over the years we have found that the reliability and lifespan of our equipment is enhanced with
regular preventative maintenance. This includes thorough service and rebuilds during scheduled
turnarounds. In fact, in the nearly 50 years we have been in business, we’ve developed a thorough
turnaround regimen to keep your equipment running for years.
16
When critical situations arise, MEA will
dispatch expertly trained Field Service
Engineers within 12 hours notice.
SUPPORT
COMPLETE CONTROL
• Service history of the equipment examined
• Testing of current system and preparation of Pre-Service Report
• Dismantle the system in a systematic order while checking variable systems
• Inspect individual parts to determine viability until next turnaround
• Replacement of consumable or damaged parts
• Analyze products failing before the MTBF (Mean Time Before Failure)
• Perform post build tests and calibrate the unit to specifications
• Submit detailed service report and recommendations until next turn around
Standard turnaround service includes:
We really appreciate you
coming on such short notice to
help us get through a problem
that potentially could have cost us
thousands of dollars. We wish we
had more service companies that
took their customers well being as
much as MEA does.
Luke Powers, Instrument Shop
Supervisor, Citgo Corpus Christi, TX
”
”
Always Guaranteed
Genuine Spare Parts
21. COMPLETE CONTROL
17
Certifications
MEA designs, manufactures, and engineers products per your required certifications and directives. We are capable of designing our products
to conform to NEC, UL, FM, CSA, CUL, CENELEC, ATEX, IEC and other directives. Product development and production are carried out per the
coveted ISO 9001:2008 certification for quality control management. Additionally, we design and manufacture our products per ISA, ASTM
and ASME standards and make sure that components from other manufacturers that are used in our products also meet these standards or
equivalent.
Guarantee
All MEA designed equipment and spare parts are warrantied against defect for a period of one year after installation. MEA performed installation
and field service comes with our Promise of Performance Assurance that, under normal conditions, your equipment will work as designed and
expected.
Experience and Qualifications
• MEA is an ISO 9001:2008 Quality Accredited Company
• MEA has half a century of innovative and performance proven product development
• MEA field engineers have extensive and rigorous internal training and hold certified TWIC cards
• MEA has worked on more than 150 major turnarounds worldwide
• MEA is compliant with ISNetworld, PICS and Safety Council Texas City
• MEA practices standardized Lean Manufacturing and has an accountable Continuous Improvement Program in full force
CREDENTIALS
Testing
Prior to product assembly, each component is individually tested. Testing includes but is not limited to; heat testing, strain testing, hydrostatic
testing, and high pressure testing. Once a product is completely assembled, it is put through a series of rigorous performance tests that simulate
real process conditions. Prior to shipment, customers are encouraged to be present for witness testing or Factory Acceptance Tests. During
Factory Acceptance Tests, it is a great opportunity for the end user to send their personnel for operational and maintenance training. Factory
Acceptance Tests also serve as a method of confirming that the product will perform per end-user specifications. Finally, once the product is
delivered it will go through a series of Site Acceptance Tests as required by the end-user. The aforementioned series of testing ensures optimal,
safe, and efficient performance of your product.